X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=boards%2Fat91sam7s-ek%2Fhw%2Fhw_lcd.h;fp=boards%2Fat91sam7s-ek%2Fhw%2Fhw_lcd.h;h=3a206a0f5df48e0ef69fdd3d3935b6357142c204;hb=a22efc8dcc90c5fcb3811cf2667efb8a4e448134;hp=0000000000000000000000000000000000000000;hpb=bc0bd1c2cc28c168f9518cf6a4b11f09d39052fb;p=bertos.git

diff --git a/boards/at91sam7s-ek/hw/hw_lcd.h b/boards/at91sam7s-ek/hw/hw_lcd.h
new file mode 100644
index 00000000..3a206a0f
--- /dev/null
+++ b/boards/at91sam7s-ek/hw/hw_lcd.h
@@ -0,0 +1,156 @@
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2005, 2008 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2001 Bernie Innocenti <bernie@codewiz.org>
+ *
+ * -->
+ *
+ * \brief LCD low-level hardware macros
+ *
+ * \version $Id$
+ *
+ * \author Bernie Innocenti <bernie@codewiz.org>
+ * \author Stefano Fedrigo <aleph@develer.com>
+ *
+ */
+
+#ifndef HW_LCD_H
+#define HW_LCD_H
+
+#include "cfg/cfg_lcd.h"  /* CONFIG_LCD_4BIT */
+#include <cfg/macros.h>   /* BV() */
+#include <cfg/debug.h>
+
+#include <cpu/attr.h>
+#include <cpu/irq.h>
+#include <cpu/types.h>
+
+#warning TODO:This is an example implementation, you must implement it!
+
+/**
+ * \name LCD I/O pins/ports
+ * @{
+ */
+#define LCD_RS    /* Implement me! */
+#define LCD_RW    /* Implement me! */
+#define LCD_E     /* Implement me! */
+#define LCD_DB0   /* Implement me! */
+#define LCD_DB1   /* Implement me! */
+#define LCD_DB2   /* Implement me! */
+#define LCD_DB3   /* Implement me! */
+#define LCD_DB4   /* Implement me! */
+#define LCD_DB5   /* Implement me! */
+#define LCD_DB6   /* Implement me! */
+#define LCD_DB7   /* Implement me! */
+/*@}*/
+
+/**
+ * \name DB high nibble (DB[4-7])
+ * @{
+ */
+
+#if CONFIG_LCD_4BIT
+	#define LCD_MASK    (LCD_DB7 | LCD_DB6 | LCD_DB5 | LCD_DB4)
+	#define LCD_SHIFT   4
+#else
+	#define LCD_MASK (uint8_t)0xff
+	#define LCD_SHIFT 0
+#endif
+/*@}*/
+
+/**
+ * \name LCD bus control macros
+ * @{
+ */
+#define LCD_CLR_RS      /* Implement me! */
+#define LCD_SET_RS      /* Implement me! */
+#define LCD_CLR_RD      /* Implement me! */
+#define LCD_SET_RD      /* Implement me! */
+#define LCD_CLR_E       /* Implement me! */
+#define LCD_SET_E       /* Implement me! */
+
+#if CONFIG_LCD_4BIT
+	#define LCD_WRITE_H(x)  ((void)x)/* Implement me! */
+	#define LCD_WRITE_L(x)  ((void)x)/* Implement me! */
+	#define LCD_READ_H      ( 0 /* Implement me! */ )
+	#define LCD_READ_L      ( 0 /* Implement me! */ )
+#else
+	#define LCD_WRITE(x)    ((void)x)/* Implement me! */
+	#define LCD_READ        (0 /* Implement me! */ )
+#endif
+/*@}*/
+
+/** Set data bus direction to output (write to display) */
+#define LCD_DB_OUT          /* Implement me! */
+
+/** Set data bus direction to input (read from display) */
+#define LCD_DB_IN           /* Implement me! */
+
+/** Delay for write (Enable pulse width, 220ns) */
+#define LCD_DELAY_WRITE \
+	do { \
+		NOP; \
+		NOP; \
+		NOP; \
+		NOP; \
+		NOP; \
+	} while (0)
+
+/** Delay for read (Data ouput delay time, 120ns) */
+#define LCD_DELAY_READ \
+	do { \
+		NOP; \
+		NOP; \
+		NOP; \
+		NOP; \
+	} while (0)
+
+
+INLINE void lcd_bus_init(void)
+{
+	cpu_flags_t flags;
+	IRQ_SAVE_DISABLE(flags);
+
+	/*
+	 * Here set bus pin!
+	 * to init a lcd device.
+	 *
+	 */
+
+	/*
+	 * Data bus is in output state most of the time:
+	 * LCD r/w functions assume it is left in output state
+	 */
+	LCD_DB_OUT;
+
+
+	IRQ_RESTORE(flags);
+}
+
+#endif /* HW_LCD_H */