X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=boards%2Fat91sam7x-ek%2Fexamples%2Ftcp_server%2Fcfg%2Fcfg_lwip.h;fp=boards%2Fat91sam7x-ek%2Fexamples%2Ftcp_server%2Fcfg%2Fcfg_lwip.h;h=0000000000000000000000000000000000000000;hb=68cde3a340e6684e7f43bb2889d8625f8a4608a4;hp=232afef5a42266ea1385477a3de339798d090419;hpb=aea9d17572b7fa5f8e05aae6639a3deff4f79aaf;p=bertos.git diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lwip.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lwip.h deleted file mode 100644 index 232afef5..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lwip.h +++ /dev/null @@ -1,1848 +0,0 @@ -/** - * \file - * - * - * \author Andrea Righi - * - * \brief Configuration file for the lwIP TCP/IP stack module - */ - -/* - * Copyright (c) 2001-2004 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - * - * This file is part of the lwIP TCP/IP stack. - * - * Author: Adam Dunkels - * - */ -#ifndef CFG_LWIP_H -#define CFG_LWIP_H - -/* - ----------------------------------------------- - ---------- Platform specific locking ---------- - ----------------------------------------------- -*/ - -/** - * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain - * critical regions during buffer allocation, deallocation and memory - * allocation and deallocation. - */ -#ifndef SYS_LIGHTWEIGHT_PROT -#define SYS_LIGHTWEIGHT_PROT 1 -#endif - -/** - * NO_SYS==1: Provides VERY minimal functionality. Otherwise, - * use lwIP facilities. - */ -#ifndef NO_SYS -#define NO_SYS 0 -#endif - -/** - * MEMCPY: override this if you have a faster implementation at hand than the - * one included in your C library - */ -#ifndef MEMCPY -#define MEMCPY(dst,src,len) memcpy(dst,src,len) -#endif - -/** - * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a - * call to memcpy() if the length is known at compile time and is small. - */ -#ifndef SMEMCPY -#define SMEMCPY(dst,src,len) memcpy(dst,src,len) -#endif - -/* - ------------------------------------ - ---------- Memory options ---------- - ------------------------------------ -*/ -/** - * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library - * instead of the lwip internal allocator. Can save code size if you - * already use it. - */ -#ifndef MEM_LIBC_MALLOC -#define MEM_LIBC_MALLOC 0 -#endif - -/** - * Use mem_malloc/mem_free instead of the lwip pool allocator. - * - * $WIZ$ type = "boolean" - */ -#ifndef MEMP_MEM_MALLOC -#define MEMP_MEM_MALLOC 0 -#endif - -/** - * MEM_ALIGNMENT: should be set to the alignment of the CPU - * 4 byte alignment -> #define MEM_ALIGNMENT 4 - * 2 byte alignment -> #define MEM_ALIGNMENT 2 - */ -#ifndef MEM_ALIGNMENT -#define MEM_ALIGNMENT 4 -#endif - -/** - * The size of the lwIP heap memory. - * - * If the application will send a lot of data that needs to be copied, this - * should be set high. - * - * $WIZ$ type = "int"; min = 1600 - */ -#define MEM_SIZE 1600 - -/** - * Dynamic pool memory overflow protection check level. - * - * MEMP_OVERFLOW_CHECK == 0 no checking - * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed - * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time - * memp_malloc() or memp_free() is called (useful but slow!) - * - * $WIZ$ type = "int"; min = "0"; max = "2" - */ -#define MEMP_OVERFLOW_CHECK 0 - -/** - * Run a sanity check after each memp_free(). - * - * $WIZ$ type = "boolean" - */ -#define MEMP_SANITY_CHECK 0 - -/** - * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set - * of memory pools of various sizes. When mem_malloc is called, an element of - * the smallest pool that can provide the length needed is returned. - * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled. - */ -#ifndef MEM_USE_POOLS -#define MEM_USE_POOLS 0 -#endif - -/** - * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next - * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more - * reliable. */ -#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL -#define MEM_USE_POOLS_TRY_BIGGER_POOL 0 -#endif - -/** - * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h - * that defines additional pools beyond the "standard" ones required - * by lwIP. If you set this to 1, you must have lwippools.h in your - * inlude path somewhere. - */ -#ifndef MEMP_USE_CUSTOM_POOLS -#define MEMP_USE_CUSTOM_POOLS 0 -#endif - -/** - * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from - * interrupt context (or another context that doesn't allow waiting for a - * semaphore). - * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT, - * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs - * with each loop so that mem_free can run. - * - * ATTENTION: As you can see from the above description, this leads to dis-/ - * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc - * can need longer. - * - * If you don't want that, at least for NO_SYS=0, you can still use the following - * functions to enqueue a deallocation call which then runs in the tcpip_thread - * context: - * - pbuf_free_callback(p); - * - mem_free_callback(m); - */ -#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT -#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0 -#endif - -/* - ------------------------------------------------ - ---------- Internal Memory Pool Sizes ---------- - ------------------------------------------------ -*/ -/** - * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). - * If the application sends a lot of data out of ROM (or other static memory), - * this should be set high. - */ -#ifndef MEMP_NUM_PBUF -#define MEMP_NUM_PBUF 16 -#endif - -/** - * MEMP_NUM_RAW_PCB: Number of raw connection PCBs - * (requires the LWIP_RAW option) - */ -#ifndef MEMP_NUM_RAW_PCB -#define MEMP_NUM_RAW_PCB 4 -#endif - -/** - * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One - * per active UDP "connection". - * (requires the LWIP_UDP option) - */ -#ifndef MEMP_NUM_UDP_PCB -#define MEMP_NUM_UDP_PCB 4 -#endif - -/** - * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_PCB -#define MEMP_NUM_TCP_PCB 5 -#endif - -/** - * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_PCB_LISTEN -#define MEMP_NUM_TCP_PCB_LISTEN 8 -#endif - -/** - * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_SEG -#define MEMP_NUM_TCP_SEG 16 -#endif - -/** - * MEMP_NUM_REASSDATA: the number of simultaneously IP packets queued for - * reassembly (whole packets, not fragments!) - */ -#ifndef MEMP_NUM_REASSDATA -#define MEMP_NUM_REASSDATA 5 -#endif - -/** - * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing - * packets (pbufs) that are waiting for an ARP request (to resolve - * their destination address) to finish. - * (requires the ARP_QUEUEING option) - */ -#ifndef MEMP_NUM_ARP_QUEUE -#define MEMP_NUM_ARP_QUEUE 30 -#endif - -/** - * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces - * can be members et the same time (one per netif - allsystems group -, plus one - * per netif membership). - * (requires the LWIP_IGMP option) - */ -#ifndef MEMP_NUM_IGMP_GROUP -#define MEMP_NUM_IGMP_GROUP 8 -#endif - -/** - * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. - * (requires NO_SYS==0) - */ -#ifndef MEMP_NUM_SYS_TIMEOUT -#define MEMP_NUM_SYS_TIMEOUT 8 -#endif - -/** - * MEMP_NUM_NETBUF: the number of struct netbufs. - * (only needed if you use the sequential API, like api_lib.c) - */ -#ifndef MEMP_NUM_NETBUF -#define MEMP_NUM_NETBUF 2 -#endif - -/** - * MEMP_NUM_NETCONN: the number of struct netconns. - * (only needed if you use the sequential API, like api_lib.c) - */ -#ifndef MEMP_NUM_NETCONN -#define MEMP_NUM_NETCONN 4 -#endif - -/** - * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used - * for callback/timeout API communication. - * (only needed if you use tcpip.c) - */ -#ifndef MEMP_NUM_TCPIP_MSG_API -#define MEMP_NUM_TCPIP_MSG_API 8 -#endif - -/** - * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used - * for incoming packets. - * (only needed if you use tcpip.c) - */ -#ifndef MEMP_NUM_TCPIP_MSG_INPKT -#define MEMP_NUM_TCPIP_MSG_INPKT 8 -#endif - -/** - * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. - */ -#ifndef PBUF_POOL_SIZE -#define PBUF_POOL_SIZE 16 -#endif - -/* - --------------------------------- - ---------- ARP options ---------- - --------------------------------- -*/ -/** - * Enable ARP functionality. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_ARP 1 - -/** - * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached. - */ -#ifndef ARP_TABLE_SIZE -#define ARP_TABLE_SIZE 10 -#endif - -/** - * ARP_QUEUEING==1: Outgoing packets are queued during hardware address - * resolution. - */ -#ifndef ARP_QUEUEING -#define ARP_QUEUEING 1 -#endif - -/** - * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be - * updated with the source MAC and IP addresses supplied in the packet. - * You may want to disable this if you do not trust LAN peers to have the - * correct addresses, or as a limited approach to attempt to handle - * spoofing. If disabled, lwIP will need to make a new ARP request if - * the peer is not already in the ARP table, adding a little latency. - */ -#ifndef ETHARP_TRUST_IP_MAC -#define ETHARP_TRUST_IP_MAC 1 -#endif - -/** - * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header. - * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check. - * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted. - * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted. - */ -#ifndef ETHARP_SUPPORT_VLAN -#define ETHARP_SUPPORT_VLAN 0 -#endif - -/* - -------------------------------- - ---------- IP options ---------- - -------------------------------- -*/ -/** - * IP_FORWARD==1: Enables the ability to forward IP packets across network - * interfaces. If you are going to run lwIP on a device with only one network - * interface, define this to 0. - */ -#ifndef IP_FORWARD -#define IP_FORWARD 0 -#endif - -/** - * IP_OPTIONS_ALLOWED: Defines the behavior for IP options. - * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped. - * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed). - */ -#ifndef IP_OPTIONS_ALLOWED -#define IP_OPTIONS_ALLOWED 1 -#endif - -/** - * Reassemble incoming fragmented IP packets. - * - * $WIZ$ type = "boolean" - */ -#define IP_REASSEMBLY 0 - -/** - * Fragment outgoing IP packets if their size exceeds MTU. - * - * $WIZ$ type = "boolean" - */ -#define IP_FRAG 0 - -/** - * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) - * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived - * in this time, the whole packet is discarded. - */ -#ifndef IP_REASS_MAXAGE -#define IP_REASS_MAXAGE 3 -#endif - -/** - * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. - * Since the received pbufs are enqueued, be sure to configure - * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive - * packets even if the maximum amount of fragments is enqueued for reassembly! - */ -#ifndef IP_REASS_MAX_PBUFS -#define IP_REASS_MAX_PBUFS 10 -#endif - -/** - * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP - * fragmentation. Otherwise pbufs are allocated and reference the original - * packet data to be fragmented. - */ -#ifndef IP_FRAG_USES_STATIC_BUF -#define IP_FRAG_USES_STATIC_BUF 1 -#endif - -/** - * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer - * (requires IP_FRAG_USES_STATIC_BUF==1) - */ -#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU) -#define IP_FRAG_MAX_MTU 1500 -#endif - -/** - * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. - */ -#ifndef IP_DEFAULT_TTL -#define IP_DEFAULT_TTL 255 -#endif - -/** - * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast - * filter per pcb on udp and raw send operations. To enable broadcast filter - * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1. - */ -#ifndef IP_SOF_BROADCAST -#define IP_SOF_BROADCAST 0 -#endif - -/** - * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast - * filter on recv operations. - */ -#ifndef IP_SOF_BROADCAST_RECV -#define IP_SOF_BROADCAST_RECV 0 -#endif - -/* - ---------------------------------- - ---------- ICMP options ---------- - ---------------------------------- -*/ -/** - * Enable ICMP module inside the IP stack. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_ICMP 1 - -/** - * ICMP_TTL: Default value for Time-To-Live used by ICMP packets. - */ -#ifndef ICMP_TTL -#define ICMP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only) - */ -#ifndef LWIP_BROADCAST_PING -#define LWIP_BROADCAST_PING 0 -#endif - -/** - * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only) - */ -#ifndef LWIP_MULTICAST_PING -#define LWIP_MULTICAST_PING 0 -#endif - -/* - --------------------------------- - ---------- RAW options ---------- - --------------------------------- -*/ -/** - * Enable application layer to hook into the IP layer itself. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_RAW 0 - -/** - * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. - */ -#ifndef RAW_TTL -#define RAW_TTL (IP_DEFAULT_TTL) -#endif - -/* - ---------------------------------- - ---------- DHCP options ---------- - ---------------------------------- -*/ -/** - * Enable DHCP module. UDP must be also available. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_DHCP 1 - -/** - * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address. - */ -#ifndef DHCP_DOES_ARP_CHECK -#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP)) -#endif - -/* - ------------------------------------ - ---------- AUTOIP options ---------- - ------------------------------------ -*/ -/** - * LWIP_AUTOIP==1: Enable AUTOIP module. - */ -#ifndef LWIP_AUTOIP -#define LWIP_AUTOIP 0 -#endif - -/** - * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on - * the same interface at the same time. - */ -#ifndef LWIP_DHCP_AUTOIP_COOP -#define LWIP_DHCP_AUTOIP_COOP 0 -#endif - -/** - * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes - * that should be sent before falling back on AUTOIP. This can be set - * as low as 1 to get an AutoIP address very quickly, but you should - * be prepared to handle a changing IP address when DHCP overrides - * AutoIP. - */ -#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES -#define LWIP_DHCP_AUTOIP_COOP_TRIES 9 -#endif - -/* - ---------------------------------- - ---------- SNMP options ---------- - ---------------------------------- -*/ -/** - * Turn on SNMP module. UDP must be also available. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_SNMP 0 - -/** - * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will - * allow. At least one request buffer is required. - */ -#ifndef SNMP_CONCURRENT_REQUESTS -#define SNMP_CONCURRENT_REQUESTS 1 -#endif - -/** - * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap - * destination is required - */ -#ifndef SNMP_TRAP_DESTINATIONS -#define SNMP_TRAP_DESTINATIONS 1 -#endif - -/** - * SNMP_PRIVATE_MIB: - */ -#ifndef SNMP_PRIVATE_MIB -#define SNMP_PRIVATE_MIB 0 -#endif - -/** - * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not - * a safe action and disabled when SNMP_SAFE_REQUESTS = 1). - * Unsafe requests are disabled by default! - */ -#ifndef SNMP_SAFE_REQUESTS -#define SNMP_SAFE_REQUESTS 1 -#endif - -/* - ---------------------------------- - ---------- IGMP options ---------- - ---------------------------------- -*/ -/** - * Turn on IGMP module. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_IGMP 0 - -/* - ---------------------------------- - ---------- DNS options ----------- - ---------------------------------- -*/ -/** - * Turn on DNS module. UDP must be available for DNS transport. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_DNS 0 - -/** DNS maximum number of entries to maintain locally. */ -#ifndef DNS_TABLE_SIZE -#define DNS_TABLE_SIZE 4 -#endif - -/** DNS maximum host name length supported in the name table. */ -#ifndef DNS_MAX_NAME_LENGTH -#define DNS_MAX_NAME_LENGTH 256 -#endif - -/** The maximum of DNS servers */ -#ifndef DNS_MAX_SERVERS -#define DNS_MAX_SERVERS 2 -#endif - -/** DNS do a name checking between the query and the response. */ -#ifndef DNS_DOES_NAME_CHECK -#define DNS_DOES_NAME_CHECK 1 -#endif - -/** DNS use a local buffer if DNS_USES_STATIC_BUF=0, a static one if - DNS_USES_STATIC_BUF=1, or a dynamic one if DNS_USES_STATIC_BUF=2. - The buffer will be of size DNS_MSG_SIZE */ -#ifndef DNS_USES_STATIC_BUF -#define DNS_USES_STATIC_BUF 1 -#endif - -/** DNS message max. size. Default value is RFC compliant. */ -#ifndef DNS_MSG_SIZE -#define DNS_MSG_SIZE 512 -#endif - -/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled, - * you have to define - * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}} - * (an array of structs name/address, where address is an u32_t in network - * byte order). - * - * Instead, you can also use an external function: - * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name) - * that returns the IP address or INADDR_NONE if not found. - */ -#ifndef DNS_LOCAL_HOSTLIST -#define DNS_LOCAL_HOSTLIST 0 -#endif /* DNS_LOCAL_HOSTLIST */ - -/** If this is turned on, the local host-list can be dynamically changed - * at runtime. */ -#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC -#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0 -#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */ - -/* - --------------------------------- - ---------- UDP options ---------- - --------------------------------- -*/ -/** - * Turn on UDP. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_UDP 1 - -/** - * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP) - */ -#ifndef LWIP_UDPLITE -#define LWIP_UDPLITE 0 -#endif - -/** - * UDP_TTL: Default Time-To-Live value. - */ -#ifndef UDP_TTL -#define UDP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf. - */ -#ifndef LWIP_NETBUF_RECVINFO -#define LWIP_NETBUF_RECVINFO 0 -#endif - -/* - --------------------------------- - ---------- TCP options ---------- - --------------------------------- -*/ -/** - * Turn on TCP. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_TCP 1 - -/** - * TCP_TTL: Default Time-To-Live value. - */ -#ifndef TCP_TTL -#define TCP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * TCP_WND: The size of a TCP window. This must be at least - * (2 * TCP_MSS) for things to work well - */ -#ifndef TCP_WND -#define TCP_WND (4 * TCP_MSS) -#endif - -/** - * TCP_MAXRTX: Maximum number of retransmissions of data segments. - */ -#ifndef TCP_MAXRTX -#define TCP_MAXRTX 12 -#endif - -/** - * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments. - */ -#ifndef TCP_SYNMAXRTX -#define TCP_SYNMAXRTX 6 -#endif - -/** - * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order. - * Define to 0 if your device is low on memory. - */ -#ifndef TCP_QUEUE_OOSEQ -#define TCP_QUEUE_OOSEQ (LWIP_TCP) -#endif - -/** - * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default, - * you might want to increase this.) - * For the receive side, this MSS is advertised to the remote side - * when opening a connection. For the transmit size, this MSS sets - * an upper limit on the MSS advertised by the remote host. - */ -#ifndef TCP_MSS -#define TCP_MSS 536 -#endif - -/** - * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really - * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which - * reflects the available reassembly buffer size at the remote host) and the - * largest size permitted by the IP layer" (RFC 1122) - * Setting this to 1 enables code that checks TCP_MSS against the MTU of the - * netif used for a connection and limits the MSS if it would be too big otherwise. - */ -#ifndef TCP_CALCULATE_EFF_SEND_MSS -#define TCP_CALCULATE_EFF_SEND_MSS 1 -#endif - - -/** - * TCP_SND_BUF: TCP sender buffer space (bytes). - */ -#ifndef TCP_SND_BUF -#define TCP_SND_BUF (2 * TCP_MSS) -#endif - -/** - * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least - * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. - */ -#ifndef TCP_SND_QUEUELEN -#define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF)/(TCP_MSS)) -#endif - -/** - * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than or equal - * to TCP_SND_BUF. It is the amount of space which must be available in the - * TCP snd_buf for select to return writable. - */ -#ifndef TCP_SNDLOWAT -#define TCP_SNDLOWAT ((TCP_SND_BUF)/2) -#endif - -/** - * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb. - */ -#ifndef TCP_LISTEN_BACKLOG -#define TCP_LISTEN_BACKLOG 0 -#endif - -/** - * The maximum allowed backlog for TCP listen netconns. - * This backlog is used unless another is explicitly specified. - * 0xff is the maximum (u8_t). - */ -#ifndef TCP_DEFAULT_LISTEN_BACKLOG -#define TCP_DEFAULT_LISTEN_BACKLOG 0xff -#endif - -/** - * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option. - */ -#ifndef LWIP_TCP_TIMESTAMPS -#define LWIP_TCP_TIMESTAMPS 0 -#endif - -/** - * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an - * explicit window update - */ -#ifndef TCP_WND_UPDATE_THRESHOLD -#define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4) -#endif - -/* - ---------------------------------- - ---------- Pbuf options ---------- - ---------------------------------- -*/ -/** - * PBUF_LINK_HLEN: the number of bytes that should be allocated for a - * link level header. The default is 14, the standard value for - * Ethernet. - */ -#ifndef PBUF_LINK_HLEN -#define PBUF_LINK_HLEN 14 -#endif - -/** - * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is - * designed to accomodate single full size TCP frame in one pbuf, including - * TCP_MSS, IP header, and link header. - */ -#ifndef PBUF_POOL_BUFSIZE -#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) -#endif - -/* - ------------------------------------------------ - ---------- Network Interfaces options ---------- - ------------------------------------------------ -*/ -/** - * Use DHCP_OPTION_HOSTNAME with netif's hostname field. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_NETIF_HOSTNAME 1 - -/** - * Support netif api (in netifapi.c) - * - * $WIZ$ type = "boolean" - */ -#define LWIP_NETIF_API 0 - -/** - * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface - * changes its up/down status (i.e., due to DHCP IP acquistion) - */ -#ifndef LWIP_NETIF_STATUS_CALLBACK -#define LWIP_NETIF_STATUS_CALLBACK 0 -#endif - -/** - * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface - * whenever the link changes (i.e., link down) - */ -#ifndef LWIP_NETIF_LINK_CALLBACK -#define LWIP_NETIF_LINK_CALLBACK 0 -#endif - -/** - * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table - * indices) in struct netif. TCP and UDP can make use of this to prevent - * scanning the ARP table for every sent packet. While this is faster for big - * ARP tables or many concurrent connections, it might be counterproductive - * if you have a tiny ARP table or if there never are concurrent connections. - */ -#ifndef LWIP_NETIF_HWADDRHINT -#define LWIP_NETIF_HWADDRHINT 0 -#endif - -/** - * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP - * address equal to the netif IP address, looping them back up the stack. - */ -#ifndef LWIP_NETIF_LOOPBACK -#define LWIP_NETIF_LOOPBACK 0 -#endif - -/** - * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback - * sending for each netif (0 = disabled) - */ -#ifndef LWIP_LOOPBACK_MAX_PBUFS -#define LWIP_LOOPBACK_MAX_PBUFS 0 -#endif - -/** - * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in - * the system, as netifs must change how they behave depending on this setting - * for the LWIP_NETIF_LOOPBACK option to work. - * Setting this is needed to avoid reentering non-reentrant functions like - * tcp_input(). - * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a - * multithreaded environment like tcpip.c. In this case, netif->input() - * is called directly. - * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup. - * The packets are put on a list and netif_poll() must be called in - * the main application loop. - */ -#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING -#define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS) -#endif - -/** - * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data - * to be sent into one single pbuf. This is for compatibility with DMA-enabled - * MACs that do not support scatter-gather. - * Beware that this might involve CPU-memcpy before transmitting that would not - * be needed without this flag! Use this only if you need to! - * - * @todo: TCP and IP-frag do not work with this, yet: - */ -#ifndef LWIP_NETIF_TX_SINGLE_PBUF -#define LWIP_NETIF_TX_SINGLE_PBUF 0 -#endif /* LWIP_NETIF_TX_SINGLE_PBUF */ - -/* - ------------------------------------ - ---------- LOOPIF options ---------- - ------------------------------------ -*/ -/** - * Support loop interface (127.0.0.1) and loopif.c - * - * $WIZ$ type = "boolean" - */ -#define LWIP_HAVE_LOOPIF 0 - -/* - ------------------------------------ - ---------- SLIPIF options ---------- - ------------------------------------ -*/ -/** - * Support slip interface and slipif.c - * - * $WIZ$ type = "boolean" - */ -#define LWIP_HAVE_SLIPIF 0 - -/* - ------------------------------------ - ---------- Thread options ---------- - ------------------------------------ -*/ -/** - * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread. - */ -#ifndef TCPIP_THREAD_NAME -#define TCPIP_THREAD_NAME "tcpip_thread" -#endif - -/** - * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef TCPIP_THREAD_STACKSIZE -#define TCPIP_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3) -#endif - -/** - * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef TCPIP_THREAD_PRIO -#define TCPIP_THREAD_PRIO 0 -#endif - -/** - * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages - * The queue size value itself is platform-dependent, but is passed to - * sys_mbox_new() when tcpip_init is called. - */ -#ifndef TCPIP_MBOX_SIZE -#define TCPIP_MBOX_SIZE 0 -#endif - -/** - * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread. - */ -#ifndef SLIPIF_THREAD_NAME -#define SLIPIF_THREAD_NAME "slipif_loop" -#endif - -/** - * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef SLIPIF_THREAD_STACKSIZE -#define SLIPIF_THREAD_STACKSIZE 0 -#endif - -/** - * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef SLIPIF_THREAD_PRIO -#define SLIPIF_THREAD_PRIO 1 -#endif - -/** - * PPP_THREAD_NAME: The name assigned to the pppMain thread. - */ -#ifndef PPP_THREAD_NAME -#define PPP_THREAD_NAME "pppMain" -#endif - -/** - * PPP_THREAD_STACKSIZE: The stack size used by the pppMain thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef PPP_THREAD_STACKSIZE -#define PPP_THREAD_STACKSIZE 0 -#endif - -/** - * PPP_THREAD_PRIO: The priority assigned to the pppMain thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef PPP_THREAD_PRIO -#define PPP_THREAD_PRIO 1 -#endif - -/** - * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread. - */ -#ifndef DEFAULT_THREAD_NAME -#define DEFAULT_THREAD_NAME "lwIP" -#endif - -/** - * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef DEFAULT_THREAD_STACKSIZE -#define DEFAULT_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3) -#endif - -/** - * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef DEFAULT_THREAD_PRIO -#define DEFAULT_THREAD_PRIO 1 -#endif - -/** - * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_RAW_RECVMBOX_SIZE -#define DEFAULT_RAW_RECVMBOX_SIZE 0 -#endif - -/** - * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_UDP_RECVMBOX_SIZE -#define DEFAULT_UDP_RECVMBOX_SIZE 0 -#endif - -/** - * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_TCP_RECVMBOX_SIZE -#define DEFAULT_TCP_RECVMBOX_SIZE 0 -#endif - -/** - * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections. - * The queue size value itself is platform-dependent, but is passed to - * sys_mbox_new() when the acceptmbox is created. - */ -#ifndef DEFAULT_ACCEPTMBOX_SIZE -#define DEFAULT_ACCEPTMBOX_SIZE 0 -#endif - -/* - ---------------------------------------------- - ---------- Sequential layer options ---------- - ---------------------------------------------- -*/ -/** - * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!) - * Don't use it if you're not an active lwIP project member - */ -#ifndef LWIP_TCPIP_CORE_LOCKING -#define LWIP_TCPIP_CORE_LOCKING 0 -#endif - -/** - * Enable Netconn API (require to use api_lib.c) - * - * $WIZ$ type = "boolean" - */ -#define LWIP_NETCONN 1 - -/* - ------------------------------------ - ---------- Socket options ---------- - ------------------------------------ -*/ -/** - * Enable Socket API (require to use sockets.c) - * - * $WIZ$ type = "boolean" - */ -#define LWIP_SOCKET 0 - -/** - * Enable BSD-style sockets functions names. - * - * NOTE: do not change this!!! - */ -#ifndef LWIP_COMPAT_SOCKETS -#define LWIP_COMPAT_SOCKETS 0 -#endif - -/** - * Enable POSIX-style sockets functions names. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_POSIX_SOCKETS_IO_NAMES 0 - -/** - * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT - * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set - * in seconds. (does not require sockets.c, and will affect tcp.c) - */ -#ifndef LWIP_TCP_KEEPALIVE -#define LWIP_TCP_KEEPALIVE 0 -#endif - -/** - * LWIP_SO_RCVTIMEO==1: Enable SO_RCVTIMEO processing. - */ -#ifndef LWIP_SO_RCVTIMEO -#define LWIP_SO_RCVTIMEO 0 -#endif - -/** - * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing. - */ -#ifndef LWIP_SO_RCVBUF -#define LWIP_SO_RCVBUF 0 -#endif - -/** - * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize. - */ -#ifndef RECV_BUFSIZE_DEFAULT -#define RECV_BUFSIZE_DEFAULT INT_MAX -#endif - -/** - * SO_REUSE==1: Enable SO_REUSEADDR and SO_REUSEPORT options. DO NOT USE! - */ -#ifndef SO_REUSE -#define SO_REUSE 0 -#endif - -/* - ---------------------------------------- - ---------- Statistics options ---------- - ---------------------------------------- -*/ -/** - * LWIP_STATS==1: Enable statistics collection in lwip_stats. - */ -#ifndef LWIP_STATS -#define LWIP_STATS 0 -#endif - -#if LWIP_STATS - -/** - * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions. - */ -#ifndef LWIP_STATS_DISPLAY -#define LWIP_STATS_DISPLAY 0 -#endif - -/** - * LINK_STATS==1: Enable link stats. - */ -#ifndef LINK_STATS -#define LINK_STATS 1 -#endif - -/** - * ETHARP_STATS==1: Enable etharp stats. - */ -#ifndef ETHARP_STATS -#define ETHARP_STATS (LWIP_ARP) -#endif - -/** - * IP_STATS==1: Enable IP stats. - */ -#ifndef IP_STATS -#define IP_STATS 1 -#endif - -/** - * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is - * on if using either frag or reass. - */ -#ifndef IPFRAG_STATS -#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG) -#endif - -/** - * ICMP_STATS==1: Enable ICMP stats. - */ -#ifndef ICMP_STATS -#define ICMP_STATS 1 -#endif - -/** - * IGMP_STATS==1: Enable IGMP stats. - */ -#ifndef IGMP_STATS -#define IGMP_STATS (LWIP_IGMP) -#endif - -/** - * UDP_STATS==1: Enable UDP stats. Default is on if - * UDP enabled, otherwise off. - */ -#ifndef UDP_STATS -#define UDP_STATS (LWIP_UDP) -#endif - -/** - * TCP_STATS==1: Enable TCP stats. Default is on if TCP - * enabled, otherwise off. - */ -#ifndef TCP_STATS -#define TCP_STATS (LWIP_TCP) -#endif - -/** - * MEM_STATS==1: Enable mem.c stats. - */ -#ifndef MEM_STATS -#define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0)) -#endif - -/** - * MEMP_STATS==1: Enable memp.c pool stats. - */ -#ifndef MEMP_STATS -#define MEMP_STATS (MEMP_MEM_MALLOC == 0) -#endif - -/** - * SYS_STATS==1: Enable system stats (sem and mbox counts, etc). - */ -#ifndef SYS_STATS -#define SYS_STATS (NO_SYS == 0) -#endif - -#else - -#define LINK_STATS 0 -#define ETHARP_STATS 0 -#define IP_STATS 0 -#define IPFRAG_STATS 0 -#define ICMP_STATS 0 -#define IGMP_STATS 0 -#define UDP_STATS 0 -#define TCP_STATS 0 -#define MEM_STATS 0 -#define MEMP_STATS 0 -#define SYS_STATS 0 -#define LWIP_STATS_DISPLAY 0 - -#endif /* LWIP_STATS */ - -/* - --------------------------------- - ---------- PPP options ---------- - --------------------------------- -*/ -/** - * Enable PPP. - * - * $WIZ$ type = "boolean" - */ -#define PPP_SUPPORT 0 - -/** - * Enable PPP Over Ethernet. - * - * $WIZ$ type = "boolean" - */ -#define PPPOE_SUPPORT 0 - -/** - * PPPOS_SUPPORT==1: Enable PPP Over Serial - */ -#ifndef PPPOS_SUPPORT -#define PPPOS_SUPPORT PPP_SUPPORT -#endif - -#if PPP_SUPPORT - -/** - * NUM_PPP: Max PPP sessions. - */ -#ifndef NUM_PPP -#define NUM_PPP 1 -#endif - -/** - * PAP_SUPPORT==1: Support PAP. - */ -#ifndef PAP_SUPPORT -#define PAP_SUPPORT 0 -#endif - -/** - * CHAP_SUPPORT==1: Support CHAP. - */ -#ifndef CHAP_SUPPORT -#define CHAP_SUPPORT 0 -#endif - -/** - * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef MSCHAP_SUPPORT -#define MSCHAP_SUPPORT 0 -#endif - -/** - * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef CBCP_SUPPORT -#define CBCP_SUPPORT 0 -#endif - -/** - * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef CCP_SUPPORT -#define CCP_SUPPORT 0 -#endif - -/** - * VJ_SUPPORT==1: Support VJ header compression. - */ -#ifndef VJ_SUPPORT -#define VJ_SUPPORT 0 -#endif - -/** - * MD5_SUPPORT==1: Support MD5 (see also CHAP). - */ -#ifndef MD5_SUPPORT -#define MD5_SUPPORT 0 -#endif - -/* - * Timeouts - */ -#ifndef FSM_DEFTIMEOUT -#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */ -#endif - -#ifndef FSM_DEFMAXTERMREQS -#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */ -#endif - -#ifndef FSM_DEFMAXCONFREQS -#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */ -#endif - -#ifndef FSM_DEFMAXNAKLOOPS -#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */ -#endif - -#ifndef UPAP_DEFTIMEOUT -#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */ -#endif - -#ifndef UPAP_DEFREQTIME -#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */ -#endif - -#ifndef CHAP_DEFTIMEOUT -#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */ -#endif - -#ifndef CHAP_DEFTRANSMITS -#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */ -#endif - -/* Interval in seconds between keepalive echo requests, 0 to disable. */ -#ifndef LCP_ECHOINTERVAL -#define LCP_ECHOINTERVAL 0 -#endif - -/* Number of unanswered echo requests before failure. */ -#ifndef LCP_MAXECHOFAILS -#define LCP_MAXECHOFAILS 3 -#endif - -/* Max Xmit idle time (in jiffies) before resend flag char. */ -#ifndef PPP_MAXIDLEFLAG -#define PPP_MAXIDLEFLAG 100 -#endif - -/* - * Packet sizes - * - * Note - lcp shouldn't be allowed to negotiate stuff outside these - * limits. See lcp.h in the pppd directory. - * (XXX - these constants should simply be shared by lcp.c instead - * of living in lcp.h) - */ -#define PPP_MTU 1500 /* Default MTU (size of Info field) */ -#ifndef PPP_MAXMTU -/* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */ -#define PPP_MAXMTU 1500 /* Largest MTU we allow */ -#endif -#define PPP_MINMTU 64 -#define PPP_MRU 1500 /* default MRU = max length of info field */ -#define PPP_MAXMRU 1500 /* Largest MRU we allow */ -#ifndef PPP_DEFMRU -#define PPP_DEFMRU 296 /* Try for this */ -#endif -#define PPP_MINMRU 128 /* No MRUs below this */ - -#ifndef MAXNAMELEN -#define MAXNAMELEN 256 /* max length of hostname or name for auth */ -#endif -#ifndef MAXSECRETLEN -#define MAXSECRETLEN 256 /* max length of password or secret */ -#endif - -#endif /* PPP_SUPPORT */ - -/* - -------------------------------------- - ---------- Checksum options ---------- - -------------------------------------- -*/ -/** - * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets. - */ -#ifndef CHECKSUM_GEN_IP -#define CHECKSUM_GEN_IP 1 -#endif - -/** - * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets. - */ -#ifndef CHECKSUM_GEN_UDP -#define CHECKSUM_GEN_UDP 1 -#endif - -/** - * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets. - */ -#ifndef CHECKSUM_GEN_TCP -#define CHECKSUM_GEN_TCP 1 -#endif - -/** - * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets. - */ -#ifndef CHECKSUM_CHECK_IP -#define CHECKSUM_CHECK_IP 1 -#endif - -/** - * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets. - */ -#ifndef CHECKSUM_CHECK_UDP -#define CHECKSUM_CHECK_UDP 1 -#endif - -/** - * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets. - */ -#ifndef CHECKSUM_CHECK_TCP -#define CHECKSUM_CHECK_TCP 1 -#endif - -/* - --------------------------------------- - ---------- Debugging options ---------- - --------------------------------------- -*/ - -#ifdef _DEBUG -#define LWIP_DEBUG -#endif - -/** - * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is - * compared against this value. If it is smaller, then debugging - * messages are written. - */ -#ifndef LWIP_DBG_MIN_LEVEL -#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL -#endif - -/** - * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable - * debug messages of certain types. - */ -#ifndef LWIP_DBG_TYPES_ON -#define LWIP_DBG_TYPES_ON LWIP_DBG_ON -#endif - -/** - * ETHARP_DEBUG: Enable debugging in etharp.c. - */ -#ifndef ETHARP_DEBUG -#define ETHARP_DEBUG LWIP_DBG_OFF -#endif - -/** - * NETIF_DEBUG: Enable debugging in netif.c. - */ -#ifndef NETIF_DEBUG -#define NETIF_DEBUG LWIP_DBG_OFF -#endif - -/** - * PBUF_DEBUG: Enable debugging in pbuf.c. - */ -#ifndef PBUF_DEBUG -#define PBUF_DEBUG LWIP_DBG_OFF -#endif - -/** - * API_LIB_DEBUG: Enable debugging in api_lib.c. - */ -#ifndef API_LIB_DEBUG -#define API_LIB_DEBUG LWIP_DBG_OFF -#endif - -/** - * API_MSG_DEBUG: Enable debugging in api_msg.c. - */ -#ifndef API_MSG_DEBUG -#define API_MSG_DEBUG LWIP_DBG_OFF -#endif - -/** - * SOCKETS_DEBUG: Enable debugging in sockets.c. - */ -#ifndef SOCKETS_DEBUG -#define SOCKETS_DEBUG LWIP_DBG_OFF -#endif - -/** - * ICMP_DEBUG: Enable debugging in icmp.c. - */ -#ifndef ICMP_DEBUG -#define ICMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * IGMP_DEBUG: Enable debugging in igmp.c. - */ -#ifndef IGMP_DEBUG -#define IGMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * INET_DEBUG: Enable debugging in inet.c. - */ -#ifndef INET_DEBUG -#define INET_DEBUG LWIP_DBG_OFF -#endif - -/** - * IP_DEBUG: Enable debugging for IP. - */ -#ifndef IP_DEBUG -#define IP_DEBUG LWIP_DBG_OFF -#endif - -/** - * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass. - */ -#ifndef IP_REASS_DEBUG -#define IP_REASS_DEBUG LWIP_DBG_OFF -#endif - -/** - * RAW_DEBUG: Enable debugging in raw.c. - */ -#ifndef RAW_DEBUG -#define RAW_DEBUG LWIP_DBG_OFF -#endif - -/** - * MEM_DEBUG: Enable debugging in mem.c. - */ -#ifndef MEM_DEBUG -#define MEM_DEBUG LWIP_DBG_OFF -#endif - -/** - * MEMP_DEBUG: Enable debugging in memp.c. - */ -#ifndef MEMP_DEBUG -#define MEMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SYS_DEBUG: Enable debugging in sys.c. - */ -#ifndef SYS_DEBUG -#define SYS_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_DEBUG: Enable debugging for TCP. - */ -#ifndef TCP_DEBUG -#define TCP_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug. - */ -#ifndef TCP_INPUT_DEBUG -#define TCP_INPUT_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit. - */ -#ifndef TCP_FR_DEBUG -#define TCP_FR_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit - * timeout. - */ -#ifndef TCP_RTO_DEBUG -#define TCP_RTO_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_CWND_DEBUG: Enable debugging for TCP congestion window. - */ -#ifndef TCP_CWND_DEBUG -#define TCP_CWND_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating. - */ -#ifndef TCP_WND_DEBUG -#define TCP_WND_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions. - */ -#ifndef TCP_OUTPUT_DEBUG -#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_RST_DEBUG: Enable debugging for TCP with the RST message. - */ -#ifndef TCP_RST_DEBUG -#define TCP_RST_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths. - */ -#ifndef TCP_QLEN_DEBUG -#define TCP_QLEN_DEBUG LWIP_DBG_OFF -#endif - -/** - * UDP_DEBUG: Enable debugging in UDP. - */ -#ifndef UDP_DEBUG -#define UDP_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCPIP_DEBUG: Enable debugging in tcpip.c. - */ -#ifndef TCPIP_DEBUG -#define TCPIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * PPP_DEBUG: Enable debugging for PPP. - */ -#ifndef PPP_DEBUG -#define PPP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SLIP_DEBUG: Enable debugging in slipif.c. - */ -#ifndef SLIP_DEBUG -#define SLIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * DHCP_DEBUG: Enable debugging in dhcp.c. - */ -#ifndef DHCP_DEBUG -#define DHCP_DEBUG LWIP_DBG_OFF -#endif - -/** - * AUTOIP_DEBUG: Enable debugging in autoip.c. - */ -#ifndef AUTOIP_DEBUG -#define AUTOIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SNMP_MSG_DEBUG: Enable debugging for SNMP messages. - */ -#ifndef SNMP_MSG_DEBUG -#define SNMP_MSG_DEBUG LWIP_DBG_OFF -#endif - -/** - * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs. - */ -#ifndef SNMP_MIB_DEBUG -#define SNMP_MIB_DEBUG LWIP_DBG_OFF -#endif - -/** - * DNS_DEBUG: Enable debugging for DNS. - */ -#ifndef DNS_DEBUG -#define DNS_DEBUG LWIP_DBG_OFF -#endif - -/* Custom definitions: !!!DO NOT CHANGE THIS SECTION!!! */ -#define LWIP_TIMEVAL_PRIVATE 0 - -#endif /* CFG_LWIP_H */