X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=drv%2Flcd_gfx.c;h=d1ee76353dc4e759f2c54c3d864c0b399f40bda4;hb=77c1d6ba65a199f60faa0e0a68e63ef0eb87677c;hp=f2530298e6266c1e8920caed409bdd31f092c1ef;hpb=d7121b91d1c39488a572b732821333c72bc24137;p=bertos.git

diff --git a/drv/lcd_gfx.c b/drv/lcd_gfx.c
old mode 100755
new mode 100644
index f2530298..d1ee7635
--- a/drv/lcd_gfx.c
+++ b/drv/lcd_gfx.c
@@ -1,6 +1,31 @@
 /**
  * \file
  * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
  * Copyright 2003, 2004, 2005, 2006 Develer S.r.l. (http://www.develer.com/)
  * Copyright 2001 Bernardo Innocenti <bernie@codewiz.org>
  * This file is part of DevLib - See README.devlib for information.
@@ -16,6 +41,12 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.5  2006/07/19 12:56:25  bernie
+ *#* Convert to new Doxygen style.
+ *#*
+ *#* Revision 1.4  2006/04/27 05:40:11  bernie
+ *#* Naming convention fixes; Partial merge from project_grl.
+ *#*
  *#* Revision 1.3  2006/02/10 12:35:31  bernie
  *#* Enforce CONFIG_* definitions.
  *#*
@@ -51,18 +82,18 @@
 
 #if CONFIG_LCD_SOFTINT_REFRESH
 
-	/*! Interval between softint driven lcd refresh */
+	/** Interval between softint driven lcd refresh */
 #	define LCD_REFRESH_INTERVAL 20  /* 20ms -> 50fps */
 
 #endif /* CONFIG_LCD_SOFTINT_REFRESH */
 
-/*! Number of LCD pages */
+/** Number of LCD pages */
 #define LCD_PAGES 4
 
-/*! Width of an LCD page */
+/** Width of an LCD page */
 #define LCD_PAGESIZE (LCD_WIDTH / 2)
 
-/*!
+/**
  * \name LCD I/O pins/ports
  * @{
  */
@@ -80,7 +111,7 @@
 #define LCD_PE_E2    PE6
 /*@}*/
 
-/*!
+/**
  * \name DB high nibble (DB[4-7])
  * @{
  */
@@ -91,7 +122,7 @@
 #define LCD_DATA_HI_MASK    0xF0
 /*@}*/
 
-/*!
+/**
  * \name DB low nibble (DB[0-3])
  * @{
  */
@@ -102,7 +133,7 @@
 #define LCD_DATA_LO_MASK    0xF0
 /*@}*/
 
-/*!
+/**
  * \name LCD bus control macros
  * @{
  */
@@ -118,7 +149,7 @@
 #define LCD_CLR_E(x) (PORTE &= ~(x))
 /*@}*/
 
-/*!
+/**
  * \name Chip select bits for LCD_SET_E()
  * @{
  */
@@ -126,41 +157,41 @@
 #define LCDF_E2 (BV(LCD_PE_E2))
 /*@}*/
 
-/*! Read from the LCD data bus (DB[0-7]) */
+/** Read from the LCD data bus (DB[0-7]) */
 #define LCD_READ ( \
 		((LCD_DATA_LO_PIN & LCD_DATA_LO_MASK) >> LCD_DATA_LO_SHIFT) | \
 		((LCD_DATA_HI_PIN & LCD_DATA_HI_MASK) >> LCD_DATA_HI_SHIFT) \
 	)
 
-/*! Write to the LCD data bus (DB[0-7]) */
+/** Write to the LCD data bus (DB[0-7]) */
 #define LCD_WRITE(d) \
 	do { \
 		LCD_DATA_LO_PORT = (LCD_DATA_LO_PORT & ~LCD_DATA_LO_MASK) | (((d)<<LCD_DATA_LO_SHIFT) & LCD_DATA_LO_MASK); \
 		LCD_DATA_HI_PORT = (LCD_DATA_HI_PORT & ~LCD_DATA_HI_MASK) | (((d)<<LCD_DATA_HI_SHIFT) & LCD_DATA_HI_MASK); \
 	} while (0)
 
-/*! Set data bus direction to output (write to display) */
+/** Set data bus direction to output (write to display) */
 #define LCD_DB_OUT \
 	do { \
 		LCD_DATA_LO_DDR |= LCD_DATA_LO_MASK; \
 		LCD_DATA_HI_DDR |= LCD_DATA_HI_MASK; \
 	} while (0)
 
-/*! Set data bus direction to input (read from display) */
+/** Set data bus direction to input (read from display) */
 #define LCD_DB_IN \
 	do { \
 		LCD_DATA_LO_DDR &= ~LCD_DATA_LO_MASK; \
 		LCD_DATA_HI_DDR &= ~LCD_DATA_HI_MASK; \
 	} while (0)
 
-/*! Delay for tEW (160ns) */
+/** Delay for tEW (160ns) */
 #define LCD_DELAY_WRITE \
 	do { \
 		NOP; \
 		NOP; \
 	} while (0)
 
-/*! Delay for tACC6 (180ns) */
+/** Delay for tACC6 (180ns) */
 #define LCD_DELAY_READ \
 	do { \
 		NOP; \
@@ -169,7 +200,7 @@
 	} while (0)
 
 
-/*!
+/**
  * \name 32122A Commands
  * @{
  */
@@ -189,11 +220,14 @@
 #define LCD_CMD_RESET       0xE2
 /*@}*/
 
+MOD_DEFINE(lcd)
+
+
 /* Status flags */
 #define LCDF_BUSY BV(7)
 
 #if CONFIG_LCD_WAIT
-/*!
+/**
  * \code
  *      __              __
  * RS   __\____________/__
@@ -230,7 +264,7 @@
 #endif /* CONFIG_LCD_WAIT */
 
 
-/*!
+/**
  * Raster buffer to draw into.
  *
  * Bits in the bitmap bytes have vertical orientation,
@@ -240,13 +274,13 @@ DECLARE_WALL(wall_before_raster, WALL_SIZE)
 static uint8_t lcd_raster[RASTER_SIZE(LCD_WIDTH, LCD_HEIGHT)];
 DECLARE_WALL(wall_after_raster, WALL_SIZE)
 
-/*! Default LCD bitmap */
+/** Default LCD bitmap */
 struct Bitmap lcd_bitmap;
 
 
 #if CONFIG_LCD_SOFTINT_REFRESH
 
-/*! Timer for regular LCD refresh */
+/** Timer for regular LCD refresh */
 static Timer *lcd_refresh_timer;
 
 #endif /* CONFIG_LCD_SOFTINT_REFRESH */
@@ -305,7 +339,7 @@ static inline uint8_t lcd_read(uint8_t chip)
 
 	WAIT_LCD;
 
-	/*!
+	/**
 	 * \code
 	 *      __________________
 	 * A0   __/            \__
@@ -337,7 +371,7 @@ static inline void lcd_write(uint8_t c, uint8_t chip)
 {
 	WAIT_LCD;
 
-	/*!
+	/**
 	 * \code
 	 *      __________________
 	 * A0   ___/          \___
@@ -361,10 +395,10 @@ static inline void lcd_write(uint8_t c, uint8_t chip)
 }
 
 
-/*!
+/**
  * Set LCD contrast PWM.
  */
-void lcd_setpwm(int duty)
+void lcd_setPwm(int duty)
 {
 	ASSERT(duty >= LCD_MIN_PWM);
 	ASSERT(duty <= LCD_MAX_PWM);
@@ -387,7 +421,7 @@ static void lcd_clear(void)
 }
 
 
-static void lcd_writeraster(const uint8_t *raster)
+static void lcd_writeRaster(const uint8_t *raster)
 {
 	uint8_t page, rows;
 	const uint8_t *right_raster;
@@ -413,16 +447,19 @@ static void lcd_writeraster(const uint8_t *raster)
 	}
 }
 
-
-void lcd_blit_bitmap(Bitmap *bm)
+/**
+ * Update the LCD display with data from the provided bitmap.
+ */
+void lcd_blitBitmap(Bitmap *bm)
 {
-	lcd_writeraster(bm->raster);
+	MOD_CHECK(lcd);
+	lcd_writeRaster(bm->raster);
 }
 
 
 #if CONFIG_LCD_SOFTINT_REFRESH
 
-static void lcd_refresh_softint(void)
+static void lcd_refreshSoftint(void)
 {
 	lcd_blit_bitmap(&lcd_bitmap);
 	timer_add(lcd_refresh_timer);
@@ -431,7 +468,7 @@ static void lcd_refresh_softint(void)
 #endif /* CONFIG_LCD_SOFTINT_REFRESH */
 
 
-/*!
+/**
  * Initialize LCD subsystem.
  *
  * \note The PWM used for LCD contrast is initialized in drv/pwm.c
@@ -439,6 +476,8 @@ static void lcd_refresh_softint(void)
  */
 void lcd_init(void)
 {
+	MOD_CHECK(timer);
+
 	// FIXME: interrupts are already disabled when we get here?!?
 	cpuflags_t flags;
 	IRQ_SAVE_DISABLE(flags);
@@ -496,4 +535,6 @@ void lcd_init(void)
 	timer_add(lcd_refresh_timer);
 
 #endif /* CONFIG_LCD_SOFTINT_REFRESH */
+
+	MOD_INIT(lcd);
 }