X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=drv%2Fser.c;h=03c6db8102b00efd79a9575bdbd511dc72c2c034;hb=c3c1136c1705a700f3f8ac8b67d8024c6e4d507d;hp=4da6c5bc7da2139237a0480d60e60cd767028ddb;hpb=f530f9a7018684f5ad744076220f845ed7732244;p=bertos.git

diff --git a/drv/ser.c b/drv/ser.c
index 4da6c5bc..03c6db81 100755
--- a/drv/ser.c
+++ b/drv/ser.c
@@ -3,7 +3,7 @@
  * <!--
  * Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
  * Copyright 2000 Bernardo Innocenti <bernie@codewiz.org>
- * This file is part of DevLib - See devlib/README for information.
+ * This file is part of DevLib - See README.devlib for information.
  * -->
  *
  * \brief Buffered serial I/O driver
@@ -28,6 +28,24 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.28  2006/02/17 22:23:06  bernie
+ *#* Update POSIX serial emulator.
+ *#*
+ *#* Revision 1.27  2005/11/27 23:33:40  bernie
+ *#* Use appconfig.h instead of cfg/config.h.
+ *#*
+ *#* Revision 1.26  2005/11/04 16:20:02  bernie
+ *#* Fix reference to README.devlib in header.
+ *#*
+ *#* Revision 1.25  2005/04/11 19:10:27  bernie
+ *#* Include top-level headers from cfg/ subdir.
+ *#*
+ *#* Revision 1.24  2005/01/21 20:13:15  aleph
+ *#* Fix drain at ser_close()
+ *#*
+ *#* Revision 1.23  2005/01/14 00:47:07  aleph
+ *#* ser_drain(): Wait for hw transmission complete.
+ *#*
  *#* Revision 1.22  2004/12/08 08:56:14  bernie
  *#* Rename time_t to mtime_t.
  *#*
@@ -96,9 +114,9 @@
 #include "ser.h"
 #include "ser_p.h"
 #include <mware/formatwr.h>
-#include <debug.h>
-#include <hw.h>
-#include <config.h>
+#include <cfg/debug.h>
+//#include <hw.h>
+#include <appconfig.h>
 
 /*
  * Sanity check for config parameters required by this module.
@@ -178,7 +196,7 @@ int ser_putchar(int c, struct Serial *port)
 	fifo_push_locked(&port->txfifo, (unsigned char)c);
 
 	/* (re)trigger tx interrupt */
-	port->hw->table->enabletxirq(port->hw);
+	port->hw->table->txStart(port->hw);
 
 	/* Avoid returning signed extended char */
 	return (int)((unsigned char)c);
@@ -409,13 +427,13 @@ void ser_resync(struct Serial *port, mtime_t delay)
 
 void ser_setbaudrate(struct Serial *port, unsigned long rate)
 {
-	port->hw->table->setbaudrate(port->hw, rate);
+	port->hw->table->setBaudrate(port->hw, rate);
 }
 
 
 void ser_setparity(struct Serial *port, int parity)
 {
-	port->hw->table->setparity(port->hw, parity);
+	port->hw->table->setParity(port->hw, parity);
 }
 
 
@@ -439,7 +457,12 @@ void ser_purge(struct Serial *port)
  */
 void ser_drain(struct Serial *ser)
 {
-	while (!fifo_isempty(&ser->txfifo))
+	/*
+	 * Wait until the FIFO is empty, and then until the byte currently in
+	 * the hardware register gets shifted out.
+	 */
+	while (!fifo_isempty(&ser->txfifo)
+	       || ser->hw->table->txSending(ser->hw))
 	{
 		#if CONFIG_KERNEL && CONFIG_KERN_SCHED
 			/* Give up timeslice to other processes. */
@@ -497,6 +520,15 @@ void ser_close(struct Serial *port)
 	ASSERT(port->is_open);
 	DB(port->is_open = false;)
 
+	// Wait until we finish sending everything
+	ser_drain(port);
+
 	port->hw->table->cleanup(port->hw);
-	port->hw = NULL;
+	DB(port->hw = NULL;)
+
+	/*
+	 * We purge the FIFO buffer only after the low-level cleanup, so that
+	 * we are sure that there are no more interrupts.
+	 */
+	ser_purge(port);
 }