X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=drv%2Fser.h;h=1f611646bfbc3b581f268afc7309bdf9b2d7991f;hb=5b25ae54d86d894e5d01adeef10938df1bb10e16;hp=ad43d47cf8238eade0a5315d259f68a69bec37f3;hpb=4a5ec96c6870d42943eb1199ae2ce62948d5fd85;p=bertos.git

diff --git a/drv/ser.h b/drv/ser.h
index ad43d47c..1f611646 100755
--- a/drv/ser.h
+++ b/drv/ser.h
@@ -14,6 +14,12 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.18  2004/12/08 08:57:17  bernie
+ *#* Rename time_t to mtime_t.
+ *#*
+ *#* Revision 1.17  2004/11/16 21:54:56  bernie
+ *#* Changes for SC Monoboard support.
+ *#*
  *#* Revision 1.16  2004/10/19 11:48:05  bernie
  *#* Reformat.
  *#*
@@ -101,6 +107,14 @@
 	#define SERRF_FRAMEERROR     BV(9)  /*!< Stop bit missing */
 	#define SERRF_NOISEERROR     BV(10) /*!< Noise error */
 	#define SERRF_RXSROVERRUN    BV(11) /*!< Rx shift register overrun */
+#elif defined(_EMUL)
+	typedef uint16_t serstatus_t;
+
+	/* Software errors */
+	#define SERRF_RXFIFOOVERRUN  BV(0)  /*!< Rx FIFO buffer overrun */
+	#define SERRF_RXTIMEOUT      BV(1)  /*!< Receive timeout */
+	#define SERRF_TXTIMEOUT      BV(2)  /*!< Transmit timeout */
+
 #else
 	#error unknown architecture
 #endif
@@ -146,8 +160,15 @@ enum
 	SER_UART0,
 	SER_SPI,
 #elif CPU_DSP56K
+	// \todo since we now support "fake" multiplexed serials, this should be moved to hw.h
 	SER_UART0,
-	SER_UART1,
+	SER_PUNTALI,
+	SER_BARCODE,
+#elif defined(_EMUL)
+	SER_UART0,
+	#if CONFIG_EMUL_UART1
+		SER_UART1,
+	#endif
 #else
 	#error unknown architecture
 #endif
@@ -183,10 +204,10 @@ struct Serial
 	/* \} */
 
 #if CONFIG_SER_RXTIMEOUT != -1
-	time_t rxtimeout;
+	mtime_t rxtimeout;
 #endif
 #if CONFIG_SER_TXTIMEOUT != -1
-	time_t txtimeout;
+	mtime_t txtimeout;
 #endif
 
 	/*! Holds the flags defined above.  Will be 0 when no errors have occurred. */
@@ -213,8 +234,8 @@ extern int ser_gets_echo(struct Serial *port, char *buf, int size, bool echo);
 
 extern void ser_setbaudrate(struct Serial *port, unsigned long rate);
 extern void ser_setparity(struct Serial *port, int parity);
-extern void ser_settimeouts(struct Serial *port, time_t rxtimeout, time_t txtimeout);
-extern void ser_resync(struct Serial *port, time_t delay);
+extern void ser_settimeouts(struct Serial *port, mtime_t rxtimeout, mtime_t txtimeout);
+extern void ser_resync(struct Serial *port, mtime_t delay);
 extern void ser_purge(struct Serial *port);
 extern void ser_drain(struct Serial *port);