X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=drv%2Fser_avr.c;h=02a3427e0ac185a3a7be92eac099b67c9ea20965;hb=f52e46baa21748f30f30a9e725edbf90b420ed24;hp=a1d8519227624e15c806121c05dc5e16d36be312;hpb=977bdf19f5de44f9dfef74b640d085eee00f456a;p=bertos.git diff --git a/drv/ser_avr.c b/drv/ser_avr.c index a1d85192..02a3427e 100755 --- a/drv/ser_avr.c +++ b/drv/ser_avr.c @@ -1,9 +1,9 @@ -/*! +/** * \file * * * \brief AVR UART and SPI I/O driver @@ -38,6 +38,66 @@ /*#* *#* $Log$ + *#* Revision 1.33 2006/09/13 18:21:24 bernie + *#* Add configurable SPI pin mapping. + *#* + *#* Revision 1.32 2006/07/19 12:56:26 bernie + *#* Convert to new Doxygen style. + *#* + *#* Revision 1.31 2006/05/18 00:37:29 bernie + *#* Use hw_ser.h instead of ubiquitous hw.h. + *#* + *#* Revision 1.30 2006/02/17 22:23:06 bernie + *#* Update POSIX serial emulator. + *#* + *#* Revision 1.29 2005/11/27 23:31:48 bernie + *#* Support avr-libc 1.4. + *#* + *#* Revision 1.28 2005/11/04 16:20:02 bernie + *#* Fix reference to README.devlib in header. + *#* + *#* Revision 1.27 2005/07/03 15:19:31 bernie + *#* Doxygen fix. + *#* + *#* Revision 1.26 2005/04/11 19:10:27 bernie + *#* Include top-level headers from cfg/ subdir. + *#* + *#* Revision 1.25 2005/01/25 08:37:26 bernie + *#* CONFIG_SER_HWHANDSHAKE fixes. + *#* + *#* Revision 1.24 2005/01/14 00:49:16 aleph + *#* Rename callbacks; SerialHardwareVT.txSending: New callback; Add SPI_BUS macros. + *#* + *#* Revision 1.23 2005/01/11 18:09:07 aleph + *#* Add ATmega8 SPI port definitions; Fix transmit complete IRQ bug; add strobe macros to uart1 and spi + *#* + *#* Revision 1.22 2004/12/31 17:47:45 bernie + *#* Rename UNUSED() to UNUSED_ARG(). + *#* + *#* Revision 1.21 2004/12/13 12:07:06 bernie + *#* DISABLE_IRQSAVE/ENABLE_IRQRESTORE: Convert to IRQ_SAVE_DISABLE/IRQ_RESTORE. + *#* + *#* Revision 1.20 2004/12/13 11:51:43 bernie + *#* Fix a latent bug with reentrant serial IRQs. + *#* + *#* Revision 1.19 2004/12/13 11:51:08 bernie + *#* DISABLE_INTS/ENABLE_INTS: Convert to IRQ_DISABLE/IRQ_ENABLE. + *#* + *#* Revision 1.18 2004/12/08 08:03:48 bernie + *#* Doxygen fixes. + *#* + *#* Revision 1.17 2004/10/19 07:52:35 bernie + *#* Reset parity bits before overwriting them (Fixed by batt in project_ks). + *#* + *#* Revision 1.16 2004/10/03 18:45:48 bernie + *#* Convert to new-style config macros; Allow compiling with a C++ compiler (mostly). + *#* + *#* Revision 1.15 2004/09/14 21:05:36 bernie + *#* Use debug.h instead of kdebug.h; Use new AVR pin names; Spelling fixes. + *#* + *#* Revision 1.14 2004/09/06 21:50:00 bernie + *#* Spelling fixes. + *#* *#* Revision 1.13 2004/09/06 21:40:50 bernie *#* Move buffer handling in chip-specific driver. *#* @@ -75,36 +135,35 @@ #include "ser.h" #include "ser_p.h" -#include "config.h" -#include "hw.h" /* Required for bus macros overrides */ +#include "hw_ser.h" /* Required for bus macros overrides */ +#include -#include +#include #include #include -#include +#include +#if defined(__AVR_LIBC_VERSION__) && (__AVR_LIBC_VERSION__ >= 10400UL) + #include +#else + #include +#endif -/*! - * \name Hardware handshake (RTS/CTS). - * \{ - */ -#ifndef RTS_ON -#define RTS_ON do {} while (0) -#endif -#ifndef RTS_OFF -#define RTS_OFF do {} while (0) -#endif -#ifndef IS_CTS_ON -#define IS_CTS_ON true -#endif -#ifndef EIMSKB_CTS -#define EIMSKB_CTS 0 /*!< Dummy value, must be overridden */ +#if !CONFIG_SER_HWHANDSHAKE + /** + * \name Hardware handshake (RTS/CTS). + * \{ + */ + #define RTS_ON do {} while (0) + #define RTS_OFF do {} while (0) + #define IS_CTS_ON true + #define EIMSKF_CTS 0 /**< Dummy value, must be overridden */ + /*\}*/ #endif -/*\}*/ -/*! +/** * \name Overridable serial bus hooks * * These can be redefined in hw.h to implement @@ -125,7 +184,7 @@ * \{ */ #ifndef SER_UART0_BUS_TXINIT - /*! + /** * Default TXINIT macro - invoked in uart0_init() * * - Enable both the receiver and the transmitter @@ -137,7 +196,7 @@ #endif #ifndef SER_UART0_BUS_TXBEGIN - /*! + /** * Invoked before starting a transmission * * - Enable both the receiver and the transmitter @@ -149,7 +208,7 @@ #endif #ifndef SER_UART0_BUS_TXCHAR - /*! + /** * Invoked to send one character. */ #define SER_UART0_BUS_TXCHAR(c) do { \ @@ -158,7 +217,7 @@ #endif #ifndef SER_UART0_BUS_TXEND - /*! + /** * Invoked as soon as the txfifo becomes empty * * - Keep both the receiver and the transmitter enabled @@ -171,60 +230,104 @@ #endif #ifndef SER_UART0_BUS_TXOFF - /*! + /** * \def SER_UART0_BUS_TXOFF * * Invoked after the last character has been transmitted * * The default is no action. */ + #ifdef __doxygen__ + #define SER_UART0_BUS_TXOFF + #endif #endif #ifndef SER_UART1_BUS_TXINIT - /*! \sa SER_UART0_BUS_TXINIT */ + /** \sa SER_UART0_BUS_TXINIT */ #define SER_UART1_BUS_TXINIT do { \ UCSR1B = BV(RXCIE) | BV(RXEN) | BV(TXEN); \ } while (0) #endif #ifndef SER_UART1_BUS_TXBEGIN - /*! \sa SER_UART0_BUS_TXBEGIN */ + /** \sa SER_UART0_BUS_TXBEGIN */ #define SER_UART1_BUS_TXBEGIN do { \ UCSR1B = BV(RXCIE) | BV(UDRIE) | BV(RXEN) | BV(TXEN); \ } while (0) #endif #ifndef SER_UART1_BUS_TXCHAR - /*! \sa SER_UART0_BUS_TXCHAR */ + /** \sa SER_UART0_BUS_TXCHAR */ #define SER_UART1_BUS_TXCHAR(c) do { \ UDR1 = (c); \ } while (0) #endif #ifndef SER_UART1_BUS_TXEND - /*! \sa SER_UART0_BUS_TXEND */ + /** \sa SER_UART0_BUS_TXEND */ #define SER_UART1_BUS_TXEND do { \ UCSR1B = BV(RXCIE) | BV(RXEN) | BV(TXEN); \ } while (0) #endif #ifndef SER_UART1_BUS_TXOFF - /*! + /** * \def SER_UART1_BUS_TXOFF * * \see SER_UART0_BUS_TXOFF */ + #ifdef __doxygen__ + #define SER_UART1_BUS_TXOFF + #endif +#endif +/*\}*/ + + +/** + * \name Overridable SPI hooks + * + * These can be redefined in hw.h to implement + * special bus policies such as slave select pin handling, etc. + * + * \{ + */ +#ifndef SER_SPI_BUS_TXINIT + /** + * Default TXINIT macro - invoked in spi_init() + * The default is no action. + */ + #define SER_SPI_BUS_TXINIT +#endif + +#ifndef SER_SPI_BUS_TXCLOSE + /** + * Invoked after the last character has been transmitted. + * The default is no action. + */ + #define SER_SPI_BUS_TXCLOSE #endif /*\}*/ /* SPI port and pin configuration */ -#define SPI_PORT PORTB -#define SPI_DDR DDRB -#define SPI_SCK_BIT PORTB1 -#define SPI_MOSI_BIT PORTB2 -#define SPI_MISO_BIT PORTB3 - -/* USART registers definitions */ -#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) +#if CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA103 + #define SPI_PORT PORTB + #define SPI_DDR DDRB + #define SPI_SS_BIT PB0 + #define SPI_SCK_BIT PB1 + #define SPI_MOSI_BIT PB2 + #define SPI_MISO_BIT PB3 +#elif CPU_AVR_ATMEGA8 + #define SPI_PORT PORTB + #define SPI_DDR DDRB + #define SPI_SS_BIT PB2 + #define SPI_SCK_BIT PB5 + #define SPI_MOSI_BIT PB3 + #define SPI_MISO_BIT PB4 +#else + #error Unknown architecture +#endif + +/* USART register definitions */ +#if CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 #define AVR_HAS_UART1 1 -#elif defined(__AVR_ATmega8__) +#elif CPU_AVR_ATMEGA8 #define AVR_HAS_UART1 0 #define UCSR0A UCSRA #define UCSR0B UCSRB @@ -234,7 +337,8 @@ #define UBRR0H UBRRH #define SIG_UART0_DATA SIG_UART_DATA #define SIG_UART0_RECV SIG_UART_RECV -#elif defined(__AVR_ATmega103__) + #define SIG_UART0_TRANS SIG_UART_TRANS +#elif CPU_AVR_ATMEGA103 #define AVR_HAS_UART1 0 #define UCSR0B UCR #define UDR0 UDR @@ -242,12 +346,13 @@ #define UBRR0L UBRR #define SIG_UART0_DATA SIG_UART_DATA #define SIG_UART0_RECV SIG_UART_RECV + #define SIG_UART0_TRANS SIG_UART_TRANS #else #error Unknown architecture #endif -/*! +/** * \def CONFIG_SER_STROBE * * This is a debug facility that can be used to @@ -278,7 +383,7 @@ static unsigned char spi_txbuffer[CONFIG_SPI_TXBUFSIZE]; static unsigned char spi_rxbuffer[CONFIG_SPI_RXBUFSIZE]; -/*! +/** * Internal hardware state structure * * The \a sending variable is true while the transmission @@ -302,12 +407,11 @@ struct AvrSerial /* - * These are to trick GCC into *not* using - * absolute addressing mode when accessing - * ser_handles, which is very expensive. + * These are to trick GCC into *not* using absolute addressing mode + * when accessing ser_handles, which is very expensive. * - * Accessing through these pointers generates - * much shorter (and hopefully faster) code. + * Accessing through these pointers generates much shorter + * (and hopefully faster) code. */ struct Serial *ser_uart0 = &ser_handles[SER_UART0]; #if AVR_HAS_UART1 @@ -320,13 +424,16 @@ struct Serial *ser_spi = &ser_handles[SER_SPI]; /* * Callbacks */ -static void uart0_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial *, ser)) +static void uart0_init( + UNUSED_ARG(struct SerialHardware *, _hw), + UNUSED_ARG(struct Serial *, ser)) { SER_UART0_BUS_TXINIT; RTS_ON; + SER_STROBE_INIT; } -static void uart0_cleanup(UNUSED(struct SerialHardware *, _hw)) +static void uart0_cleanup(UNUSED_ARG(struct SerialHardware *, _hw)) { UCSR0B = 0; } @@ -336,10 +443,9 @@ static void uart0_enabletxirq(struct SerialHardware *_hw) struct AvrSerial *hw = (struct AvrSerial *)_hw; /* - * WARNING: racy code here! The tx interrupt - * sets hw->sending to false when it runs with - * an empty fifo. The order of the statements - * in the if-block matters. + * WARNING: racy code here! The tx interrupt sets hw->sending to false + * when it runs with an empty fifo. The order of statements in the + * if-block matters. */ if (!hw->sending) { @@ -348,12 +454,12 @@ static void uart0_enabletxirq(struct SerialHardware *_hw) } } -static void uart0_setbaudrate(UNUSED(struct SerialHardware *, _hw), unsigned long rate) +static void uart0_setbaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned long rate) { /* Compute baud-rate period */ uint16_t period = (((CLOCK_FREQ / 16UL) + (rate / 2)) / rate) - 1; -#ifndef __AVR_ATmega103__ +#if !CPU_AVR_ATMEGA103 UBRR0H = (period) >> 8; #endif UBRR0L = (period); @@ -361,23 +467,25 @@ static void uart0_setbaudrate(UNUSED(struct SerialHardware *, _hw), unsigned lon //DB(kprintf("uart0_setbaudrate(rate=%lu): period=%d\n", rate, period);) } -static void uart0_setparity(UNUSED(struct SerialHardware *, _hw), int parity) +static void uart0_setparity(UNUSED_ARG(struct SerialHardware *, _hw), int parity) { -#ifndef __AVR_ATmega103__ - UCSR0C |= (parity) << UPM0; +#if !CPU_AVR_ATMEGA103 + UCSR0C = (UCSR0C & ~(BV(UPM1) | BV(UPM0))) | ((parity) << UPM0); #endif } #if AVR_HAS_UART1 -static void uart1_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial *, ser)) +static void uart1_init( + UNUSED_ARG(struct SerialHardware *, _hw), + UNUSED_ARG(struct Serial *, ser)) { SER_UART1_BUS_TXINIT; RTS_ON; SER_STROBE_INIT; } -static void uart1_cleanup(UNUSED(struct SerialHardware *, _hw)) +static void uart1_cleanup(UNUSED_ARG(struct SerialHardware *, _hw)) { UCSR1B = 0; } @@ -399,7 +507,7 @@ static void uart1_enabletxirq(struct SerialHardware *_hw) } } -static void uart1_setbaudrate(UNUSED(struct SerialHardware *, _hw), unsigned long rate) +static void uart1_setbaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned long rate) { /* Compute baud-rate period */ uint16_t period = (((CLOCK_FREQ / 16UL) + (rate / 2)) / rate) - 1; @@ -410,14 +518,14 @@ static void uart1_setbaudrate(UNUSED(struct SerialHardware *, _hw), unsigned lon //DB(kprintf("uart1_setbaudrate(rate=%ld): period=%d\n", rate, period);) } -static void uart1_setparity(UNUSED(struct SerialHardware *, _hw), int parity) +static void uart1_setparity(UNUSED_ARG(struct SerialHardware *, _hw), int parity) { - UCSR1C |= (parity) << UPM0; + UCSR1C = (UCSR1C & ~(BV(UPM1) | BV(UPM0))) | ((parity) << UPM0); } #endif // AVR_HAS_UART1 -static void spi_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial *, ser)) +static void spi_init(UNUSED_ARG(struct SerialHardware *, _hw), UNUSED_ARG(struct Serial *, ser)) { /* * Set MOSI and SCK ports out, MISO in. @@ -432,17 +540,73 @@ static void spi_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial * with the KBus serial RX, and the transmitter of the slave boards * would be unable to drive the line. */ - SPI_DDR |= BV(SPI_MOSI_BIT) | BV(SPI_SCK_BIT); - SPI_DDR &= ~BV(SPI_MISO_BIT); - /* Enable SPI, IRQ on, Master, CPU_CLOCK/16 */ - SPCR = BV(SPE) | BV(SPIE) | BV(MSTR) | BV(SPR0); + ATOMIC(SPI_DDR |= (BV(SPI_MOSI_BIT) | BV(SPI_SCK_BIT))); + + /* + * If the SPI master mode is activated and the SS pin is in input and tied low, + * the SPI hardware will automatically switch to slave mode! + * For proper communication this pins should therefore be: + * - as output + * - as input but tied high forever! + * This driver set the pin as output. + */ + #warning SPI SS pin set as output for proper operation, check schematics for possible conflicts. + ATOMIC(SPI_DDR |= BV(SPI_SS_BIT)); + + ATOMIC(SPI_DDR &= ~BV(SPI_MISO_BIT)); + /* Enable SPI, IRQ on, Master */ + SPCR = BV(SPE) | BV(SPIE) | BV(MSTR); + + /* Set data order */ + #if CONFIG_SPI_DATA_ORDER == SER_LSB_FIRST + SPCR |= BV(DORD); + #endif + + /* Set SPI clock rate */ + #if CONFIG_SPI_CLOCK_DIV == 128 + SPCR |= (BV(SPR1) | BV(SPR0)); + #elif (CONFIG_SPI_CLOCK_DIV == 64 || CONFIG_SPI_CLOCK_DIV == 32) + SPCR |= BV(SPR1); + #elif (CONFIG_SPI_CLOCK_DIV == 16 || CONFIG_SPI_CLOCK_DIV == 8) + SPCR |= BV(SPR0); + #elif (CONFIG_SPI_CLOCK_DIV == 4 || CONFIG_SPI_CLOCK_DIV == 2) + // SPR0 & SDPR1 both at 0 + #else + #error Unsupported SPI clock division factor. + #endif + + /* Set SPI2X bit (spi double frequency) */ + #if (CONFIG_SPI_CLOCK_DIV == 128 || CONFIG_SPI_CLOCK_DIV == 64 \ + || CONFIG_SPI_CLOCK_DIV == 16 || CONFIG_SPI_CLOCK_DIV == 4) + SPSR &= ~BV(SPI2X); + #elif (CONFIG_SPI_CLOCK_DIV == 32 || CONFIG_SPI_CLOCK_DIV == 8 || CONFIG_SPI_CLOCK_DIV == 2) + SPSR |= BV(SPI2X); + #else + #error Unsupported SPI clock division factor. + #endif + + /* Set clock polarity */ + #if CONFIG_SPI_CLOCK_POL == 1 + SPCR |= BV(CPOL); + #endif + + /* Set clock phase */ + #if CONFIG_SPI_CLOCK_PHASE == 1 + SPCR |= BV(CPHA); + #endif + SER_SPI_BUS_TXINIT; + + SER_STROBE_INIT; } -static void spi_cleanup(UNUSED(struct SerialHardware *, _hw)) +static void spi_cleanup(UNUSED_ARG(struct SerialHardware *, _hw)) { SPCR = 0; + + SER_SPI_BUS_TXCLOSE; + /* Set all pins as inputs */ - SPI_DDR &= ~(BV(SPI_MISO_BIT) | BV(SPI_MOSI_BIT) | BV(SPI_SCK_BIT)); + ATOMIC(SPI_DDR &= ~(BV(SPI_MISO_BIT) | BV(SPI_MOSI_BIT) | BV(SPI_SCK_BIT) | BV(SPI_SS_BIT))); } static void spi_starttx(struct SerialHardware *_hw) @@ -450,7 +614,7 @@ static void spi_starttx(struct SerialHardware *_hw) struct AvrSerial *hw = (struct AvrSerial *)_hw; cpuflags_t flags; - DISABLE_IRQSAVE(flags); + IRQ_SAVE_DISABLE(flags); /* Send data only if the SPI is not already transmitting */ if (!hw->sending && !fifo_isempty(&ser_spi->txfifo)) @@ -459,115 +623,135 @@ static void spi_starttx(struct SerialHardware *_hw) SPDR = fifo_pop(&ser_spi->txfifo); } - ENABLE_IRQRESTORE(flags); + IRQ_RESTORE(flags); } -static void spi_setbaudrate(UNUSED(struct SerialHardware *, _hw), UNUSED(unsigned long, rate)) +static void spi_setbaudrate( + UNUSED_ARG(struct SerialHardware *, _hw), + UNUSED_ARG(unsigned long, rate)) { // nop } -static void spi_setparity(UNUSED(struct SerialHardware *, _hw), UNUSED(int, parity)) +static void spi_setparity(UNUSED_ARG(struct SerialHardware *, _hw), UNUSED_ARG(int, parity)) { // nop } +static bool tx_sending(struct SerialHardware* _hw) +{ + struct AvrSerial *hw = (struct AvrSerial *)_hw; + return hw->sending; +} + +// FIXME: move into compiler.h? Ditch? +#if COMPILER_C99 + #define C99INIT(name,val) .name = val +#elif defined(__GNUC__) + #define C99INIT(name,val) name: val +#else + #warning No designated initializers, double check your code + #define C99INIT(name,val) (val) +#endif + /* * High-level interface data structures */ static const struct SerialHardwareVT UART0_VT = { - .init = uart0_init, - .cleanup = uart0_cleanup, - .setbaudrate = uart0_setbaudrate, - .setparity = uart0_setparity, - .enabletxirq = uart0_enabletxirq, + C99INIT(init, uart0_init), + C99INIT(cleanup, uart0_cleanup), + C99INIT(setBaudrate, uart0_setbaudrate), + C99INIT(setParity, uart0_setparity), + C99INIT(txStart, uart0_enabletxirq), + C99INIT(txSending, tx_sending), }; #if AVR_HAS_UART1 static const struct SerialHardwareVT UART1_VT = { - .init = uart1_init, - .cleanup = uart1_cleanup, - .setbaudrate = uart1_setbaudrate, - .setparity = uart1_setparity, - .enabletxirq = uart1_enabletxirq, + C99INIT(init, uart1_init), + C99INIT(cleanup, uart1_cleanup), + C99INIT(setBaudrate, uart1_setbaudrate), + C99INIT(setParity, uart1_setparity), + C99INIT(txStart, uart1_enabletxirq), + C99INIT(txSending, tx_sending), }; #endif // AVR_HAS_UART1 static const struct SerialHardwareVT SPI_VT = { - .init = spi_init, - .cleanup = spi_cleanup, - .setbaudrate = spi_setbaudrate, - .setparity = spi_setparity, - .enabletxirq = spi_starttx, + C99INIT(init, spi_init), + C99INIT(cleanup, spi_cleanup), + C99INIT(setBaudrate, spi_setbaudrate), + C99INIT(setParity, spi_setparity), + C99INIT(txStart, spi_starttx), + C99INIT(txSending, tx_sending), }; static struct AvrSerial UARTDescs[SER_CNT] = { { - .hw = { - .table = &UART0_VT, - .txbuffer = uart0_txbuffer, - .rxbuffer = uart0_rxbuffer, - .txbuffer_size = CONFIG_UART0_TXBUFSIZE, - .rxbuffer_size = CONFIG_UART0_RXBUFSIZE, + C99INIT(hw, /**/) { + C99INIT(table, &UART0_VT), + C99INIT(txbuffer, uart0_txbuffer), + C99INIT(rxbuffer, uart0_rxbuffer), + C99INIT(txbuffer_size, sizeof(uart0_txbuffer)), + C99INIT(rxbuffer_size, sizeof(uart0_rxbuffer)), }, - .sending = false, + C99INIT(sending, false), }, #if AVR_HAS_UART1 { - .hw = { - .table = &UART1_VT, - .txbuffer = uart1_txbuffer, - .rxbuffer = uart1_rxbuffer, - .txbuffer_size = CONFIG_UART1_TXBUFSIZE, - .rxbuffer_size = CONFIG_UART1_RXBUFSIZE, + C99INIT(hw, /**/) { + C99INIT(table, &UART1_VT), + C99INIT(txbuffer, uart1_txbuffer), + C99INIT(rxbuffer, uart1_rxbuffer), + C99INIT(txbuffer_size, sizeof(uart1_txbuffer)), + C99INIT(rxbuffer_size, sizeof(uart1_rxbuffer)), }, - .sending = false, + C99INIT(sending, false), }, #endif { - .hw = { - .table = &SPI_VT, - .txbuffer = spi_txbuffer, - .rxbuffer = spi_rxbuffer, - .txbuffer_size = CONFIG_SPI_TXBUFSIZE, - .rxbuffer_size = CONFIG_SPI_RXBUFSIZE, + C99INIT(hw, /**/) { + C99INIT(table, &SPI_VT), + C99INIT(txbuffer, spi_txbuffer), + C99INIT(rxbuffer, spi_rxbuffer), + C99INIT(txbuffer_size, sizeof(spi_txbuffer)), + C99INIT(rxbuffer_size, sizeof(spi_rxbuffer)), }, - .sending = false, + C99INIT(sending, false), } }; -struct SerialHardware* ser_hw_getdesc(int unit) +struct SerialHardware *ser_hw_getdesc(int unit) { ASSERT(unit < SER_CNT); return &UARTDescs[unit].hw; } - /* * Interrupt handlers */ #if CONFIG_SER_HWHANDSHAKE -//! This interrupt is triggered when the CTS line goes high +/// This interrupt is triggered when the CTS line goes high SIGNAL(SIG_CTS) { // Re-enable UDR empty interrupt and TX, then disable CTS interrupt UCSR0B = BV(RXCIE) | BV(UDRIE) | BV(RXEN) | BV(TXEN); - cbi(EIMSK, EIMSKB_CTS); + EIMSK &= ~EIMSKF_CTS; } #endif // CONFIG_SER_HWHANDSHAKE -/*! +/** * Serial 0 TX interrupt handler */ SIGNAL(SIG_UART0_DATA) @@ -589,8 +773,8 @@ SIGNAL(SIG_UART0_DATA) // Disable rx interrupt and tx, enable CTS interrupt // UNTESTED UCSR0B = BV(RXCIE) | BV(RXEN) | BV(TXEN); - sbi(EIFR, EIMSKB_CTS); - sbi(EIMSK, EIMSKB_CTS); + EIFR |= EIMSKF_CTS; + EIMSK |= EIMSKF_CTS; } #endif else @@ -603,7 +787,7 @@ SIGNAL(SIG_UART0_DATA) } #ifdef SER_UART0_BUS_TXOFF -/*! +/** * Serial port 0 TX complete interrupt handler. * * This IRQ is usually disabled. The UDR-empty interrupt @@ -638,7 +822,7 @@ SIGNAL(SIG_UART0_TRANS) #if AVR_HAS_UART1 -/*! +/** * Serial 1 TX interrupt handler */ SIGNAL(SIG_UART1_DATA) @@ -660,8 +844,8 @@ SIGNAL(SIG_UART1_DATA) // Disable rx interrupt and tx, enable CTS interrupt // UNTESTED UCSR1B = BV(RXCIE) | BV(RXEN) | BV(TXEN); - sbi(EIFR, EIMSKB_CTS); - sbi(EIMSK, EIMSKB_CTS); + EIFR |= EIMSKF_CTS; + EIMSK |= EIMSKF_CTS; } #endif else @@ -674,7 +858,7 @@ SIGNAL(SIG_UART1_DATA) } #ifdef SER_UART1_BUS_TXOFF -/*! +/** * Serial port 1 TX complete interrupt handler. * * \sa port 0 TX complete handler. @@ -699,7 +883,7 @@ SIGNAL(SIG_UART1_TRANS) #endif // AVR_HAS_UART1 -/*! +/** * Serial 0 RX complete interrupt handler. * * This handler is interruptible. @@ -720,7 +904,7 @@ SIGNAL(SIG_UART0_RECV) /* Disable Recv complete IRQ */ //UCSR0B &= ~BV(RXCIE); - //ENABLE_INTS; + //IRQ_ENABLE; /* Should be read before UDR */ ser_uart0->status |= UCSR0A & (SERRF_RXSROVERRUN | SERRF_FRAMEERROR); @@ -744,7 +928,7 @@ SIGNAL(SIG_UART0_RECV) } /* Reenable receive complete int */ - //DISABLE_INTS; + //IRQ_DISABLE; //UCSR0B |= BV(RXCIE); SER_STROBE_OFF; @@ -753,7 +937,7 @@ SIGNAL(SIG_UART0_RECV) #if AVR_HAS_UART1 -/*! +/** * Serial 1 RX complete interrupt handler. * * This handler is interruptible. @@ -770,7 +954,7 @@ SIGNAL(SIG_UART1_RECV) /* Disable Recv complete IRQ */ //UCSR1B &= ~BV(RXCIE); - //ENABLE_INTS; + //IRQ_ENABLE; /* Should be read before UDR */ ser_uart1->status |= UCSR1A & (SERRF_RXSROVERRUN | SERRF_FRAMEERROR); @@ -792,7 +976,8 @@ SIGNAL(SIG_UART1_RECV) RTS_OFF; #endif } - /* Reenable receive complete int */ + /* Re-enable receive complete int */ + //IRQ_DISABLE; //UCSR1B |= BV(RXCIE); SER_STROBE_OFF; @@ -801,11 +986,13 @@ SIGNAL(SIG_UART1_RECV) #endif // AVR_HAS_UART1 -/*! +/** * SPI interrupt handler */ SIGNAL(SIG_SPI) { + SER_STROBE_ON; + /* Read incoming byte. */ if (!fifo_isfull(&ser_spi->rxfifo)) fifo_push(&ser_spi->rxfifo, SPDR); @@ -820,4 +1007,6 @@ SIGNAL(SIG_SPI) SPDR = fifo_pop(&ser_spi->txfifo); else UARTDescs[SER_SPI].sending = false; + + SER_STROBE_OFF; }