X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=drv%2Fser_avr.c;h=2d0ae6d0ddf3dc5287932433ff7ece93d3f926e2;hb=b25aabb82dd47404b0697e1394fd3a14963e1224;hp=0b35db44b7b599bdc469989e5c9d5917f1342343;hpb=277b540c0764dd376dcf583acdc97a2b2fd3d8e6;p=bertos.git diff --git a/drv/ser_avr.c b/drv/ser_avr.c index 0b35db44..2d0ae6d0 100755 --- a/drv/ser_avr.c +++ b/drv/ser_avr.c @@ -3,7 +3,7 @@ * * * \brief AVR UART and SPI I/O driver @@ -38,8 +38,65 @@ /*#* *#* $Log$ - *#* Revision 1.11 2004/08/25 14:12:08 rasky - *#* Aggiornato il comment block dei log RCS + *#* Revision 1.31 2006/05/18 00:37:29 bernie + *#* Use hw_ser.h instead of ubiquitous hw.h. + *#* + *#* Revision 1.30 2006/02/17 22:23:06 bernie + *#* Update POSIX serial emulator. + *#* + *#* Revision 1.29 2005/11/27 23:31:48 bernie + *#* Support avr-libc 1.4. + *#* + *#* Revision 1.28 2005/11/04 16:20:02 bernie + *#* Fix reference to README.devlib in header. + *#* + *#* Revision 1.27 2005/07/03 15:19:31 bernie + *#* Doxygen fix. + *#* + *#* Revision 1.26 2005/04/11 19:10:27 bernie + *#* Include top-level headers from cfg/ subdir. + *#* + *#* Revision 1.25 2005/01/25 08:37:26 bernie + *#* CONFIG_SER_HWHANDSHAKE fixes. + *#* + *#* Revision 1.24 2005/01/14 00:49:16 aleph + *#* Rename callbacks; SerialHardwareVT.txSending: New callback; Add SPI_BUS macros. + *#* + *#* Revision 1.23 2005/01/11 18:09:07 aleph + *#* Add ATmega8 SPI port definitions; Fix transmit complete IRQ bug; add strobe macros to uart1 and spi + *#* + *#* Revision 1.22 2004/12/31 17:47:45 bernie + *#* Rename UNUSED() to UNUSED_ARG(). + *#* + *#* Revision 1.21 2004/12/13 12:07:06 bernie + *#* DISABLE_IRQSAVE/ENABLE_IRQRESTORE: Convert to IRQ_SAVE_DISABLE/IRQ_RESTORE. + *#* + *#* Revision 1.20 2004/12/13 11:51:43 bernie + *#* Fix a latent bug with reentrant serial IRQs. + *#* + *#* Revision 1.19 2004/12/13 11:51:08 bernie + *#* DISABLE_INTS/ENABLE_INTS: Convert to IRQ_DISABLE/IRQ_ENABLE. + *#* + *#* Revision 1.18 2004/12/08 08:03:48 bernie + *#* Doxygen fixes. + *#* + *#* Revision 1.17 2004/10/19 07:52:35 bernie + *#* Reset parity bits before overwriting them (Fixed by batt in project_ks). + *#* + *#* Revision 1.16 2004/10/03 18:45:48 bernie + *#* Convert to new-style config macros; Allow compiling with a C++ compiler (mostly). + *#* + *#* Revision 1.15 2004/09/14 21:05:36 bernie + *#* Use debug.h instead of kdebug.h; Use new AVR pin names; Spelling fixes. + *#* + *#* Revision 1.14 2004/09/06 21:50:00 bernie + *#* Spelling fixes. + *#* + *#* Revision 1.13 2004/09/06 21:40:50 bernie + *#* Move buffer handling in chip-specific driver. + *#* + *#* Revision 1.12 2004/08/29 22:06:10 bernie + *#* Fix a bug in the (unused) RTS/CTS code; Clarify documentation. *#* *#* Revision 1.10 2004/08/10 06:30:41 bernie *#* Major redesign of serial bus policy handling. @@ -72,53 +129,36 @@ #include "ser.h" #include "ser_p.h" -#include "kdebug.h" -#include "config.h" -#include "hw.h" +#include "hw_ser.h" /* Required for bus macros overrides */ +#include + +#include #include #include -#include - - -/*! - * \name Hardware handshake (RTS/CTS). - * \{ - */ -#ifndef RTS_ON -#define RTS_ON do {} while (0) -#endif -#ifndef RTS_OFF -#define RTS_OFF do {} while (0) -#endif -#ifndef IS_CTS_ON -#define IS_CTS_ON true -#endif -#ifndef EIMSKB_CTS -#define EIMSKB_CTS 0 /*!< Dummy value, must be overridden */ +#include +#if defined(__AVR_LIBC_VERSION__) && (__AVR_LIBC_VERSION__ >= 10400UL) + #include +#else + #include #endif -/*\}*/ -/*! - * \def CONFIG_SER_STROBE - * - * This is a debug facility that can be used to - * monitor SER interrupt activity on an external pin. - * - * To use strobes, redefine the macros SER_STROBE_ON, - * SER_STROBE_OFF and SER_STROBE_INIT and set - * CONFIG_SER_STROBE to 1. - */ -#ifndef CONFIG_SER_STROBE - #define SER_STROBE_ON do {/*nop*/} while(0) - #define SER_STROBE_OFF do {/*nop*/} while(0) - #define SER_STROBE_INIT do {/*nop*/} while(0) +#if !CONFIG_SER_HWHANDSHAKE + /*! + * \name Hardware handshake (RTS/CTS). + * \{ + */ + #define RTS_ON do {} while (0) + #define RTS_OFF do {} while (0) + #define IS_CTS_ON true + #define EIMSKF_CTS 0 /*!< Dummy value, must be overridden */ + /*\}*/ #endif /*! - * \name Overridable serial hooks + * \name Overridable serial bus hooks * * These can be redefined in hw.h to implement * special bus policies such as half-duplex, 485, etc. @@ -191,6 +231,9 @@ * * The default is no action. */ + #ifdef __doxygen__ + #define SER_UART0_BUS_TXOFF + #endif #endif #ifndef SER_UART1_BUS_TXINIT @@ -223,21 +266,60 @@ * * \see SER_UART0_BUS_TXOFF */ + #ifdef __doxygen__ + #define SER_UART1_BUS_TXOFF + #endif +#endif +/*\}*/ + + +/*! + * \name Overridable SPI hooks + * + * These can be redefined in hw.h to implement + * special bus policies such as slave select pin handling, etc. + * + * \{ + */ +#ifndef SER_SPI_BUS_TXINIT + /*! + * Default TXINIT macro - invoked in spi_init() + * The default is no action. + */ + #define SER_SPI_BUS_TXINIT +#endif + +#ifndef SER_SPI_BUS_TXCLOSE + /*! + * Invoked after the last character has been transmitted. + * The default is no action. + */ + #define SER_SPI_BUS_TXCLOSE #endif /*\}*/ /* SPI port and pin configuration */ -#define SPI_PORT PORTB -#define SPI_DDR DDRB -#define SPI_SCK_BIT PORTB1 -#define SPI_MOSI_BIT PORTB2 -#define SPI_MISO_BIT PORTB3 - -/* USART registers definitions */ -#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) +#if CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA103 + #define SPI_PORT PORTB + #define SPI_DDR DDRB + #define SPI_SCK_BIT PB1 + #define SPI_MOSI_BIT PB2 + #define SPI_MISO_BIT PB3 +#elif CPU_AVR_ATMEGA8 + #define SPI_PORT PORTB + #define SPI_DDR DDRB + #define SPI_SCK_BIT PB5 + #define SPI_MOSI_BIT PB3 + #define SPI_MISO_BIT PB4 +#else + #error Unknown architecture +#endif + +/* USART register definitions */ +#if CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 #define AVR_HAS_UART1 1 -#elif defined(__AVR_ATmega8__) +#elif CPU_AVR_ATMEGA8 #define AVR_HAS_UART1 0 #define UCSR0A UCSRA #define UCSR0B UCSRB @@ -247,7 +329,8 @@ #define UBRR0H UBRRH #define SIG_UART0_DATA SIG_UART_DATA #define SIG_UART0_RECV SIG_UART_RECV -#elif defined(__AVR_ATmega103__) + #define SIG_UART0_TRANS SIG_UART_TRANS +#elif CPU_AVR_ATMEGA103 #define AVR_HAS_UART1 0 #define UCSR0B UCR #define UDR0 UDR @@ -255,27 +338,58 @@ #define UBRR0L UBRR #define SIG_UART0_DATA SIG_UART_DATA #define SIG_UART0_RECV SIG_UART_RECV + #define SIG_UART0_TRANS SIG_UART_TRANS #else #error Unknown architecture #endif +/*! + * \def CONFIG_SER_STROBE + * + * This is a debug facility that can be used to + * monitor SER interrupt activity on an external pin. + * + * To use strobes, redefine the macros SER_STROBE_ON, + * SER_STROBE_OFF and SER_STROBE_INIT and set + * CONFIG_SER_STROBE to 1. + */ +#if !defined(CONFIG_SER_STROBE) || !CONFIG_SER_STROBE + #define SER_STROBE_ON do {/*nop*/} while(0) + #define SER_STROBE_OFF do {/*nop*/} while(0) + #define SER_STROBE_INIT do {/*nop*/} while(0) +#endif + + /* From the high-level serial driver */ extern struct Serial ser_handles[SER_CNT]; +/* TX and RX buffers */ +static unsigned char uart0_txbuffer[CONFIG_UART0_TXBUFSIZE]; +static unsigned char uart0_rxbuffer[CONFIG_UART0_RXBUFSIZE]; +#if AVR_HAS_UART1 + static unsigned char uart1_txbuffer[CONFIG_UART1_TXBUFSIZE]; + static unsigned char uart1_rxbuffer[CONFIG_UART1_RXBUFSIZE]; +#endif +static unsigned char spi_txbuffer[CONFIG_SPI_TXBUFSIZE]; +static unsigned char spi_rxbuffer[CONFIG_SPI_RXBUFSIZE]; + + /*! * Internal hardware state structure * - * \a sending var is true if we are transmitting. - * SPI note: this flag is necessary because the SPI sends and receives bytes - * at the same time and the SPI IRQ is unique for send/receive. - * The only way to start transmission is to write data in SPDR (this - * is done by spi_starttx()). We do this *only* if a transfer is - * not already started. + * The \a sending variable is true while the transmission + * interrupt is retriggering itself. * * For the USARTs the \a sending flag is useful for taking specific * actions before sending a burst of data, at the start of a trasmission * but not before every char sent. + * + * For the SPI, this flag is necessary because the SPI sends and receives + * bytes at the same time and the SPI IRQ is unique for send/receive. + * The only way to start transmission is to write data in SPDR (this + * is done by spi_starttx()). We do this *only* if a transfer is + * not already started. */ struct AvrSerial { @@ -283,13 +397,13 @@ struct AvrSerial volatile bool sending; }; + /* - * These are to trick GCC into *not* using - * absolute addressing mode when accessing - * ser_handles, which is very expensive. + * These are to trick GCC into *not* using absolute addressing mode + * when accessing ser_handles, which is very expensive. * - * Accessing through these pointers generates - * much shorter (and hopefully faster) code. + * Accessing through these pointers generates much shorter + * (and hopefully faster) code. */ struct Serial *ser_uart0 = &ser_handles[SER_UART0]; #if AVR_HAS_UART1 @@ -302,13 +416,16 @@ struct Serial *ser_spi = &ser_handles[SER_SPI]; /* * Callbacks */ -static void uart0_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial *, ser)) +static void uart0_init( + UNUSED_ARG(struct SerialHardware *, _hw), + UNUSED_ARG(struct Serial *, ser)) { SER_UART0_BUS_TXINIT; RTS_ON; + SER_STROBE_INIT; } -static void uart0_cleanup(UNUSED(struct SerialHardware *, _hw)) +static void uart0_cleanup(UNUSED_ARG(struct SerialHardware *, _hw)) { UCSR0B = 0; } @@ -318,10 +435,9 @@ static void uart0_enabletxirq(struct SerialHardware *_hw) struct AvrSerial *hw = (struct AvrSerial *)_hw; /* - * WARNING: racy code here! The tx interrupt - * sets hw->sending to false when it runs with - * an empty fifo. The order of the statements - * in the if-block matters. + * WARNING: racy code here! The tx interrupt sets hw->sending to false + * when it runs with an empty fifo. The order of statements in the + * if-block matters. */ if (!hw->sending) { @@ -330,36 +446,38 @@ static void uart0_enabletxirq(struct SerialHardware *_hw) } } -static void uart0_setbaudrate(UNUSED(struct SerialHardware *, _hw), unsigned long rate) +static void uart0_setbaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned long rate) { /* Compute baud-rate period */ uint16_t period = (((CLOCK_FREQ / 16UL) + (rate / 2)) / rate) - 1; -#ifndef __AVR_ATmega103__ +#if !CPU_AVR_ATMEGA103 UBRR0H = (period) >> 8; #endif UBRR0L = (period); - DB(kprintf("uart0_setbaudrate(rate=%lu): period=%d\n", rate, period);) + //DB(kprintf("uart0_setbaudrate(rate=%lu): period=%d\n", rate, period);) } -static void uart0_setparity(UNUSED(struct SerialHardware *, _hw), int parity) +static void uart0_setparity(UNUSED_ARG(struct SerialHardware *, _hw), int parity) { -#ifndef __AVR_ATmega103__ - UCSR0C |= (parity) << UPM0; +#if !CPU_AVR_ATMEGA103 + UCSR0C = (UCSR0C & ~(BV(UPM1) | BV(UPM0))) | ((parity) << UPM0); #endif } #if AVR_HAS_UART1 -static void uart1_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial *, ser)) +static void uart1_init( + UNUSED_ARG(struct SerialHardware *, _hw), + UNUSED_ARG(struct Serial *, ser)) { SER_UART1_BUS_TXINIT; RTS_ON; SER_STROBE_INIT; } -static void uart1_cleanup(UNUSED(struct SerialHardware *, _hw)) +static void uart1_cleanup(UNUSED_ARG(struct SerialHardware *, _hw)) { UCSR1B = 0; } @@ -381,7 +499,7 @@ static void uart1_enabletxirq(struct SerialHardware *_hw) } } -static void uart1_setbaudrate(UNUSED(struct SerialHardware *, _hw), unsigned long rate) +static void uart1_setbaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned long rate) { /* Compute baud-rate period */ uint16_t period = (((CLOCK_FREQ / 16UL) + (rate / 2)) / rate) - 1; @@ -389,17 +507,17 @@ static void uart1_setbaudrate(UNUSED(struct SerialHardware *, _hw), unsigned lon UBRR1H = (period) >> 8; UBRR1L = (period); - DB(kprintf("uart1_setbaudrate(rate=%ld): period=%d\n", rate, period);) + //DB(kprintf("uart1_setbaudrate(rate=%ld): period=%d\n", rate, period);) } -static void uart1_setparity(UNUSED(struct SerialHardware *, _hw), int parity) +static void uart1_setparity(UNUSED_ARG(struct SerialHardware *, _hw), int parity) { - UCSR1C |= (parity) << UPM0; + UCSR1C = (UCSR1C & ~(BV(UPM1) | BV(UPM0))) | ((parity) << UPM0); } #endif // AVR_HAS_UART1 -static void spi_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial *, ser)) +static void spi_init(UNUSED_ARG(struct SerialHardware *, _hw), UNUSED_ARG(struct Serial *, ser)) { /* * Set MOSI and SCK ports out, MISO in. @@ -418,11 +536,18 @@ static void spi_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial SPI_DDR &= ~BV(SPI_MISO_BIT); /* Enable SPI, IRQ on, Master, CPU_CLOCK/16 */ SPCR = BV(SPE) | BV(SPIE) | BV(MSTR) | BV(SPR0); + + SER_SPI_BUS_TXINIT; + + SER_STROBE_INIT; } -static void spi_cleanup(UNUSED(struct SerialHardware *, _hw)) +static void spi_cleanup(UNUSED_ARG(struct SerialHardware *, _hw)) { SPCR = 0; + + SER_SPI_BUS_TXCLOSE; + /* Set all pins as inputs */ SPI_DDR &= ~(BV(SPI_MISO_BIT) | BV(SPI_MOSI_BIT) | BV(SPI_SCK_BIT)); } @@ -432,7 +557,7 @@ static void spi_starttx(struct SerialHardware *_hw) struct AvrSerial *hw = (struct AvrSerial *)_hw; cpuflags_t flags; - DISABLE_IRQSAVE(flags); + IRQ_SAVE_DISABLE(flags); /* Send data only if the SPI is not already transmitting */ if (!hw->sending && !fifo_isempty(&ser_spi->txfifo)) @@ -441,79 +566,117 @@ static void spi_starttx(struct SerialHardware *_hw) SPDR = fifo_pop(&ser_spi->txfifo); } - ENABLE_IRQRESTORE(flags); + IRQ_RESTORE(flags); } -static void spi_setbaudrate(UNUSED(struct SerialHardware *, _hw), UNUSED(unsigned long, rate)) +static void spi_setbaudrate( + UNUSED_ARG(struct SerialHardware *, _hw), + UNUSED_ARG(unsigned long, rate)) { // nop } -static void spi_setparity(UNUSED(struct SerialHardware *, _hw), UNUSED(int, parity)) +static void spi_setparity(UNUSED_ARG(struct SerialHardware *, _hw), UNUSED_ARG(int, parity)) { // nop } +static bool tx_sending(struct SerialHardware* _hw) +{ + struct AvrSerial *hw = (struct AvrSerial *)_hw; + return hw->sending; +} + + +// FIXME: move into compiler.h? Ditch? +#if COMPILER_C99 + #define C99INIT(name,val) .name = val +#elif defined(__GNUC__) + #define C99INIT(name,val) name: val +#else + #warning No designated initializers, double check your code + #define C99INIT(name,val) (val) +#endif /* * High-level interface data structures */ static const struct SerialHardwareVT UART0_VT = { - .init = uart0_init, - .cleanup = uart0_cleanup, - .setbaudrate = uart0_setbaudrate, - .setparity = uart0_setparity, - .enabletxirq = uart0_enabletxirq, + C99INIT(init, uart0_init), + C99INIT(cleanup, uart0_cleanup), + C99INIT(setBaudrate, uart0_setbaudrate), + C99INIT(setParity, uart0_setparity), + C99INIT(txStart, uart0_enabletxirq), + C99INIT(txSending, tx_sending), }; #if AVR_HAS_UART1 static const struct SerialHardwareVT UART1_VT = { - .init = uart1_init, - .cleanup = uart1_cleanup, - .setbaudrate = uart1_setbaudrate, - .setparity = uart1_setparity, - .enabletxirq = uart1_enabletxirq, + C99INIT(init, uart1_init), + C99INIT(cleanup, uart1_cleanup), + C99INIT(setBaudrate, uart1_setbaudrate), + C99INIT(setParity, uart1_setparity), + C99INIT(txStart, uart1_enabletxirq), + C99INIT(txSending, tx_sending), }; #endif // AVR_HAS_UART1 static const struct SerialHardwareVT SPI_VT = { - .init = spi_init, - .cleanup = spi_cleanup, - .setbaudrate = spi_setbaudrate, - .setparity = spi_setparity, - .enabletxirq = spi_starttx, + C99INIT(init, spi_init), + C99INIT(cleanup, spi_cleanup), + C99INIT(setBaudrate, spi_setbaudrate), + C99INIT(setParity, spi_setparity), + C99INIT(txStart, spi_starttx), + C99INIT(txSending, tx_sending), }; static struct AvrSerial UARTDescs[SER_CNT] = { { - .hw = { .table = &UART0_VT }, - .sending = false, + C99INIT(hw, /**/) { + C99INIT(table, &UART0_VT), + C99INIT(txbuffer, uart0_txbuffer), + C99INIT(rxbuffer, uart0_rxbuffer), + C99INIT(txbuffer_size, sizeof(uart0_txbuffer)), + C99INIT(rxbuffer_size, sizeof(uart0_rxbuffer)), + }, + C99INIT(sending, false), }, #if AVR_HAS_UART1 { - .hw = { .table = &UART1_VT }, - .sending = false, + C99INIT(hw, /**/) { + C99INIT(table, &UART1_VT), + C99INIT(txbuffer, uart1_txbuffer), + C99INIT(rxbuffer, uart1_rxbuffer), + C99INIT(txbuffer_size, sizeof(uart1_txbuffer)), + C99INIT(rxbuffer_size, sizeof(uart1_rxbuffer)), + }, + C99INIT(sending, false), }, #endif { - .hw = { .table = &SPI_VT }, - .sending = false, + C99INIT(hw, /**/) { + C99INIT(table, &SPI_VT), + C99INIT(txbuffer, spi_txbuffer), + C99INIT(rxbuffer, spi_rxbuffer), + C99INIT(txbuffer_size, sizeof(spi_txbuffer)), + C99INIT(rxbuffer_size, sizeof(spi_rxbuffer)), + }, + C99INIT(sending, false), } }; -struct SerialHardware* ser_hw_getdesc(int unit) +struct SerialHardware *ser_hw_getdesc(int unit) { ASSERT(unit < SER_CNT); return &UARTDescs[unit].hw; } - /* * Interrupt handlers */ @@ -525,7 +688,7 @@ SIGNAL(SIG_CTS) { // Re-enable UDR empty interrupt and TX, then disable CTS interrupt UCSR0B = BV(RXCIE) | BV(UDRIE) | BV(RXEN) | BV(TXEN); - cbi(EIMSK, EIMSKB_CTS); + EIMSK &= ~EIMSKF_CTS; } #endif // CONFIG_SER_HWHANDSHAKE @@ -552,9 +715,9 @@ SIGNAL(SIG_UART0_DATA) { // Disable rx interrupt and tx, enable CTS interrupt // UNTESTED - UCSR0B = BV(RXCIE) | BV(RXEN); - sbi(EIFR, EIMSKB_CTS); - sbi(EIMSK, EIMSKB_CTS); + UCSR0B = BV(RXCIE) | BV(RXEN) | BV(TXEN); + EIFR |= EIMSKF_CTS; + EIMSK |= EIMSKF_CTS; } #endif else @@ -623,9 +786,9 @@ SIGNAL(SIG_UART1_DATA) { // Disable rx interrupt and tx, enable CTS interrupt // UNTESTED - UCSR1B = BV(RXCIE) | BV(RXEN); - sbi(EIFR, EIMSKB_CTS); - sbi(EIMSK, EIMSKB_CTS); + UCSR1B = BV(RXCIE) | BV(RXEN) | BV(TXEN); + EIFR |= EIMSKF_CTS; + EIMSK |= EIMSKF_CTS; } #endif else @@ -671,14 +834,20 @@ SIGNAL(SIG_UART1_TRANS) * disabled. Using INTERRUPT() is troublesome when the serial * is heavily loaded, because an interrupt could be retriggered * when executing the handler prologue before RXCIE is disabled. + * + * \note The code that re-enables interrupts is commented out + * because in some nasty cases the interrupt is retriggered. + * This is probably due to the RXC flag being set before + * RXCIE is cleared. Unfortunately the RXC flag is read-only + * and can't be cleared by code. */ SIGNAL(SIG_UART0_RECV) { SER_STROBE_ON; /* Disable Recv complete IRQ */ - UCSR0B &= ~BV(RXCIE); - ENABLE_INTS; + //UCSR0B &= ~BV(RXCIE); + //IRQ_ENABLE; /* Should be read before UDR */ ser_uart0->status |= UCSR0A & (SERRF_RXSROVERRUN | SERRF_FRAMEERROR); @@ -702,7 +871,8 @@ SIGNAL(SIG_UART0_RECV) } /* Reenable receive complete int */ - UCSR0B |= BV(RXCIE); + //IRQ_DISABLE; + //UCSR0B |= BV(RXCIE); SER_STROBE_OFF; } @@ -718,14 +888,16 @@ SIGNAL(SIG_UART0_RECV) * disabled. Using INTERRUPT() is troublesome when the serial * is heavily loaded, because an interrupt could be retriggered * when executing the handler prologue before RXCIE is disabled. + * + * \see SIGNAL(SIG_UART0_RECV) */ SIGNAL(SIG_UART1_RECV) { SER_STROBE_ON; /* Disable Recv complete IRQ */ - UCSR1B &= ~BV(RXCIE); - ENABLE_INTS; + //UCSR1B &= ~BV(RXCIE); + //IRQ_ENABLE; /* Should be read before UDR */ ser_uart1->status |= UCSR1A & (SERRF_RXSROVERRUN | SERRF_FRAMEERROR); @@ -735,8 +907,9 @@ SIGNAL(SIG_UART1_RECV) */ char c = UDR1; struct FIFOBuffer * const rxfifo = &ser_uart1->rxfifo; + //ASSERT_VALID_FIFO(rxfifo); - if (fifo_isfull(rxfifo)) + if (UNLIKELY(fifo_isfull(rxfifo))) ser_uart1->status |= SERRF_RXFIFOOVERRUN; else { @@ -746,8 +919,9 @@ SIGNAL(SIG_UART1_RECV) RTS_OFF; #endif } - /* Reenable receive complete int */ - UCSR1B |= BV(RXCIE); + /* Re-enable receive complete int */ + //IRQ_DISABLE; + //UCSR1B |= BV(RXCIE); SER_STROBE_OFF; } @@ -760,6 +934,8 @@ SIGNAL(SIG_UART1_RECV) */ SIGNAL(SIG_SPI) { + SER_STROBE_ON; + /* Read incoming byte. */ if (!fifo_isfull(&ser_spi->rxfifo)) fifo_push(&ser_spi->rxfifo, SPDR); @@ -774,4 +950,6 @@ SIGNAL(SIG_SPI) SPDR = fifo_pop(&ser_spi->txfifo); else UARTDescs[SER_SPI].sending = false; + + SER_STROBE_OFF; }