X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=src%2Fcommon;h=5bb0b79fac779d08348721f2d3e5d6df0f29ed5a;hb=91bf57bac7bed32937c13595044158007e7b5812;hp=19b5485a37feb2118edb350ae0e34da67e36613a;hpb=31e072432f985e03cc27b101f3a150fb45204d4f;p=monkeysphere.git diff --git a/src/common b/src/common index 19b5485..5bb0b79 100644 --- a/src/common +++ b/src/common @@ -1,22 +1,31 @@ # -*-shell-script-*- -# Shared bash functions for the monkeysphere +# Shared sh functions for the monkeysphere # # Written by # Jameson Rollins # # Copyright 2008, released under the GPL, version 3 or later -# all caps variables are meant to be user supplied (ie. from config +# all-caps variables are meant to be user supplied (ie. from config # file) and are considered global ######################################################################## +### COMMON VARIABLES + # managed directories ETC="/etc/monkeysphere" export ETC CACHE="/var/cache/monkeysphere" export CACHE + ######################################################################## +### UTILITY FUNCTIONS + +error() { + log "$1" + ERR=${2:-'1'} +} failure() { echo "$1" >&2 @@ -25,8 +34,12 @@ failure() { # write output to stderr log() { - echo -n "ms: " 1>&2 - echo "$@" 1>&2 + echo -n "ms: " >&2 + echo "$@" >&2 +} + +loge() { + echo "$@" >&2 } # cut out all comments(#) and blank lines from standard input @@ -39,62 +52,119 @@ cutline() { head --line="$1" | tail -1 } -# retrieve all keys with given user id from keyserver -# FIXME: need to figure out how to retrieve all matching keys -# (not just first 5) -gpg_fetch_userid() { - local id - id="$1" - echo 1,2,3,4,5 | \ - gpg --quiet --batch --command-fd 0 --with-colons \ - --keyserver "$KEYSERVER" \ - --search ="$id" >/dev/null 2>&1 -} - # check that characters are in a string (in an AND fashion). # used for checking key capability # check_capability capability a [b...] check_capability() { - local capability + local usage local capcheck - capability="$1" + usage="$1" shift 1 for capcheck ; do - if echo "$capability" | grep -q -v "$capcheck" ; then + if echo "$usage" | grep -q -v "$capcheck" ; then return 1 fi done return 0 } -# get the full fingerprint of a key ID -get_key_fingerprint() { +# convert escaped characters from gpg output back into original +# character +# FIXME: undo all escape character translation in with-colons gpg output +unescape() { + echo "$1" | sed 's/\\x3a/:/' +} + +# remove all lines with specified string from specified file +remove_line() { + local file + local string + + file="$1" + string="$2" + + if [ "$file" -a "$string" ] ; then + grep -v "$string" "$file" | sponge "$file" + fi +} + +# translate ssh-style path variables %h and %u +translate_ssh_variables() { + local uname + local home + + uname="$1" + path="$2" + + # get the user's home directory + userHome=$(getent passwd "$uname" | cut -d: -f6) + + # translate '%u' to user name + path=${path/\%u/"$uname"} + # translate '%h' to user home directory + path=${path/\%h/"$userHome"} + + echo "$path" +} + +### CONVERSION UTILITIES + +# output the ssh key for a given key ID +gpg2ssh() { local keyID + + #keyID="$1" #TMP + # only use last 16 characters until openpgp2ssh can take all 40 #TMP + keyID=$(echo "$1" | cut -c 25-) #TMP - keyID="$1" + gpg --export "$keyID" | openpgp2ssh "$keyID" 2> /dev/null +} - gpg --list-key --with-colons --fixed-list-mode \ - --with-fingerprint "$keyID" | grep "$keyID" | \ - grep '^fpr:' | cut -d: -f10 +# output the ssh key for a given secret key ID +gpgsecret2ssh() { + local keyID + + #keyID="$1" #TMP + # only use last 16 characters until openpgp2ssh can take all 40 #TMP + keyID=$(echo "$1" | cut -c 25-) #TMP + + gpg --export-secret-key "$keyID" | openpgp2ssh "$keyID" 2> /dev/null } +# output known_hosts line from ssh key +ssh2known_hosts() { + local host + local key -# convert escaped characters from gpg output back into original -# character -# FIXME: undo all escape character translation in with-colons gpg output -unescape() { - echo "$1" | sed 's/\\x3a/:/' + host="$1" + key="$2" + + echo -n "$host " + echo -n "$key" | tr -d '\n' + echo " MonkeySphere${DATE}" +} + +# output authorized_keys line from ssh key +ssh2authorized_keys() { + local userID + local key + + userID="$1" + key="$2" + + echo -n "$key" | tr -d '\n' + echo " MonkeySphere${DATE} ${userID}" } # convert key from gpg to ssh known_hosts format gpg2known_hosts() { - local keyID local host + local keyID - keyID="$1" - host=$(echo "$2" | sed -e "s|ssh://||") + host="$1" + keyID="$2" # NOTE: it seems that ssh-keygen -R removes all comment fields from # all lines in the known_hosts file. why? @@ -102,383 +172,511 @@ gpg2known_hosts() { # following regexp: # '^MonkeySphere[[:digit:]]{4}(-[[:digit:]]{2}){2}T[[:digit:]]{2}(:[[:digit:]]{2}){2}$' echo -n "$host " - gpg --export "$keyID" | \ - openpgp2ssh "$keyID" | tr -d '\n' + gpg2ssh "$keyID" | tr -d '\n' echo " MonkeySphere${DATE}" } # convert key from gpg to ssh authorized_keys format gpg2authorized_keys() { + local userID local keyID + + userID="$1" + keyID="$2" + + # NOTE: just in case, the COMMENT can be matched with the + # following regexp: + # '^MonkeySphere[[:digit:]]{4}(-[[:digit:]]{2}){2}T[[:digit:]]{2}(:[[:digit:]]{2}){2}$' + gpg2ssh "$keyID" | tr -d '\n' + echo " MonkeySphere${DATE} ${userID}" +} + +### GPG UTILITIES + +# retrieve all keys with given user id from keyserver +# FIXME: need to figure out how to retrieve all matching keys +# (not just first N (5 in this case)) +gpg_fetch_userid() { local userID + userID="$1" + + log -n " checking keyserver $KEYSERVER... " + echo 1,2,3,4,5 | \ + gpg --quiet --batch --with-colons \ + --command-fd 0 --keyserver "$KEYSERVER" \ + --search ="$userID" > /dev/null 2>&1 + loge "done." +} + +# get the full fingerprint of a key ID +get_key_fingerprint() { + local keyID + keyID="$1" - userID="$2" - gpg --export "$keyID" | \ - openpgp2ssh "$keyID" | tr -d '\n' - echo " MonkeySphere${DATE}:${userID}" + gpg --list-key --with-colons --fixed-list-mode \ + --with-fingerprint --with-fingerprint "$keyID" | \ + grep '^fpr:' | grep "$keyID" | cut -d: -f10 } +######################################################################## +### PROCESSING FUNCTIONS + # userid and key policy checking # the following checks policy on the returned keys # - checks that full key has appropriate valididy (u|f) -# - checks key has specified capability (REQUIRED_KEY_CAPABILITY) -# - checks that particular desired user id has appropriate validity -# see /usr/share/doc/gnupg/DETAILS.gz +# - checks key has specified capability (REQUIRED_*_KEY_CAPABILITY) +# - checks that requested user ID has appropriate validity +# (see /usr/share/doc/gnupg/DETAILS.gz) +# output is one line for every found key, in the following format: +# +# flag fingerprint +# +# "flag" is an acceptability flag, 0 = ok, 1 = bad +# "fingerprint" is the fingerprint of the key +# # expects global variable: "MODE" process_user_id() { local userID - local cacheDir + local requiredCapability local requiredPubCapability local gpgOut - local line local type local validity local keyid local uidfpr - local capability + local usage local keyOK - local pubKeyID local uidOK - local keyIDs - local userIDHash - local keyID + local lastKey + local lastKeyOK + local fingerprint userID="$1" - cacheDir="$2" - requiredPubCapability=$(echo "$REQUIRED_KEY_CAPABILITY" | tr "[:lower:]" "[:upper:]") + # set the required key capability based on the mode + if [ "$MODE" = 'known_hosts' ] ; then + requiredCapability="$REQUIRED_HOST_KEY_CAPABILITY" + elif [ "$MODE" = 'authorized_keys' ] ; then + requiredCapability="$REQUIRED_USER_KEY_CAPABILITY" + fi + requiredPubCapability=$(echo "$requiredCapability" | tr "[:lower:]" "[:upper:]") - # fetch keys from keyserver, return 1 if none found - gpg_fetch_userid "$userID" || return 1 + # if CHECK_KEYSERVER variable set to true, check the keyserver + # for the user ID + if [ "$CHECK_KEYSERVER" = "true" ] ; then + gpg_fetch_userid "$userID" + fi # output gpg info for (exact) userid and store - gpgOut=$(gpg --fixed-list-mode --list-key --with-colons \ - ="$userID" 2> /dev/null) - - # return 1 if there only "tru" lines are output from gpg - if [ -z "$(echo "$gpgOut" | grep -v '^tru:')" ] ; then - log " key not found." - return 1 + gpgOut=$(gpg --list-key --fixed-list-mode --with-colon \ + --with-fingerprint --with-fingerprint \ + ="$userID" 2>/dev/null) + + # if the gpg query return code is not 0, return 1 + if [ "$?" -ne 0 ] ; then + log " - key not found." + return 1 fi # loop over all lines in the gpg output and process. # need to do it this way (as opposed to "while read...") so that # variables set in loop will be visible outside of loop - for line in $(seq 1 $(echo "$gpgOut" | wc -l)) ; do - - # read the contents of the line - type=$(echo "$gpgOut" | cutline "$line" | cut -d: -f1) - validity=$(echo "$gpgOut" | cutline "$line" | cut -d: -f2) - keyid=$(echo "$gpgOut" | cutline "$line" | cut -d: -f5) - uidfpr=$(echo "$gpgOut" | cutline "$line" | cut -d: -f10) - capability=$(echo "$gpgOut" | cutline "$line" | cut -d: -f12) - + echo "$gpgOut" | cut -d: -f1,2,5,10,12 | \ + while IFS=: read -r type validity keyid uidfpr usage ; do # process based on record type case $type in 'pub') # primary keys # new key, wipe the slate keyOK= - pubKeyID= uidOK= - keyIDs= + lastKey=pub + lastKeyOK= + fingerprint= - pubKeyID="$keyid" + log " primary key found: $keyid" - # check primary key validity + # if overall key is not valid, skip if [ "$validity" != 'u' -a "$validity" != 'f' ] ; then - log " unacceptable primary key validity ($validity)." + log " - unacceptable primary key validity ($validity)." continue fi - # check capability is not Disabled... - if check_capability "$capability" 'D' ; then - log " key disabled." + # if overall key is disabled, skip + if check_capability "$usage" 'D' ; then + log " - key disabled." continue fi - # check overall key capability - # must be Encryption and Authentication - if ! check_capability "$capability" $requiredPubCapability ; then - log " unacceptable primary key capability ($capability)." + # if overall key capability is not ok, skip + if ! check_capability "$usage" $requiredPubCapability ; then + log " - unacceptable primary key capability ($usage)." continue fi - # mark if primary key is acceptable + # mark overall key as ok keyOK=true - # add primary key ID to key list if it has required capability - if check_capability "$capability" $REQUIRED_KEY_CAPABILITY ; then - keyIDs[${#keyIDs[*]}]="$keyid" + # mark primary key as ok if capability is ok + if check_capability "$usage" $requiredCapability ; then + lastKeyOK=true fi ;; 'uid') # user ids - # check key ok and we have key fingerprint - if [ -z "$keyOK" ] ; then + # if an acceptable user ID was already found, skip + if [ "$uidOK" ] ; then continue fi - # check key validity - if [ "$validity" != 'u' -a "$validity" != 'f' ] ; then + # if the user ID does not match, skip + if [ "$(unescape "$uidfpr")" != "$userID" ] ; then continue fi - # check the uid matches - if [ "$(unescape "$uidfpr")" != "$userID" ] ; then + # if the user ID validity is not ok, skip + if [ "$validity" != 'u' -a "$validity" != 'f' ] ; then continue fi - # mark if uid acceptable + # mark user ID acceptable uidOK=true + + # output a line for the primary key + # 0 = ok, 1 = bad + if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then + log " * acceptable key found." + echo "0:${fingerprint}" + else + echo "1:${fingerprint}" + fi ;; 'sub') # sub keys - # add sub key ID to key list if it has required capability - if check_capability "$capability" $REQUIRED_KEY_CAPABILITY ; then - keyIDs[${#keyIDs[*]}]="$keyid" + # unset acceptability of last key + lastKey=sub + lastKeyOK= + fingerprint= + + # if sub key validity is not ok, skip + if [ "$validity" != 'u' -a "$validity" != 'f' ] ; then + continue + fi + # if sub key capability is not ok, skip + if ! check_capability "$usage" $requiredCapability ; then + continue + fi + + # mark sub key as ok + lastKeyOK=true + ;; + 'fpr') # key fingerprint + fingerprint="$uidfpr" + + # if the last key was the pub key, skip + if [ "$lastKey" = pub ] ; then + continue + fi + + # output a line for the last subkey + # 0 = ok, 1 = bad + if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then + log " * acceptable key found." + echo "0:${fingerprint}" + else + echo "1:${fingerprint}" fi ;; esac done +} - # hash userid for cache file name - userIDHash=$(echo "$userID" | sha1sum | awk '{ print $1 }') - - # make sure the cache directory exists - mkdir -p "$cacheDir" - - # touch/clear key cache file - # (will be left empty if there are noacceptable keys) - > "$cacheDir"/"$userIDHash"."$pubKeyID" - - # for each acceptable key, write an ssh key line to the - # key cache file - if [ "$keyOK" -a "$uidOK" -a "${keyIDs[*]}" ] ; then - for keyID in ${keyIDs[@]} ; do - log " acceptable key/uid found." - - if [ "$MODE" = 'known_hosts' ] ; then - # export the key - gpg2known_hosts "$keyID" "$userID" >> \ - "$cacheDir"/"$userIDHash"."$pubKeyID" - # hash the cache file if specified - if [ "$HASH_KNOWN_HOSTS" ] ; then - ssh-keygen -H -f "$cacheDir"/"$userIDHash"."$pubKeyID" > /dev/null 2>&1 - rm "$cacheDir"/"$userIDHash"."$pubKeyID".old - fi - elif [ "$MODE" = 'authorized_keys' ] ; then - # export the key - # FIXME: needs to apply extra options for authorized_keys - # lines if specified - gpg2authorized_keys "$keyID" "$userID" >> \ - "$cacheDir"/"$userIDHash"."$pubKeyID" +# process a single host in the known_host file +process_host_known_hosts() { + local host + local userID + local ok + local keyid + local tmpfile + local returnCode + + # default return code is 1, which assumes no key was found + returnCode=1 + + host="$1" + + log "processing host: $host" + + userID="ssh://${host}" + + for line in $(process_user_id "ssh://${host}") ; do + ok=$(echo "$line" | cut -d: -f1) + keyid=$(echo "$line" | cut -d: -f2) + + sshKey=$(gpg2ssh "$keyid") + # remove the old host key line + remove_line "$KNOWN_HOSTS" "$sshKey" + # if key OK, add new host line + if [ "$ok" -eq '0' ] ; then + # hash if specified + if [ "$HASH_KNOWN_HOSTS" = 'true' ] ; then + # FIXME: this is really hackish cause ssh-keygen won't + # hash from stdin to stdout + tmpfile=$(mktemp) + ssh2known_hosts "$host" "$sshKey" > "$tmpfile" + ssh-keygen -H -f "$tmpfile" 2> /dev/null + cat "$tmpfile" >> "$KNOWN_HOSTS" + rm -f "$tmpfile" "${tmpfile}.old" + else + ssh2known_hosts "$host" "$sshKey" >> "$KNOWN_HOSTS" fi - done - fi + # set return code to be 0, since a key was found + returnCode=0 + fi + return "$returnCode" + done - # echo the path to the key cache file - echo "$cacheDir"/"$userIDHash"."$pubKeyID" + return "$returnCode" } -# update the cache for userid, and prompt to add file to -# authorized_user_ids file if the userid is found in gpg -# and not already in file. -update_userid() { - local userID - local cacheDir - local userIDKeyCache +# update the known_hosts file for a set of hosts listed on command +# line +update_known_hosts() { + local host + local returnCode - userID="$1" - cacheDir="$2" + # default return code is 0, which assumes a key was found for + # every host. code will be set to 1 if a key is not found for at + # least one host + returnCode=0 - log "processing userid: '$userID'" + # set the trap to remove any lockfiles on exit + trap "lockfile-remove $KNOWN_HOSTS" EXIT - userIDKeyCache=$(process_user_id "$userID" "$cacheDir") + # create a lockfile on known_hosts + lockfile-create "$KNOWN_HOSTS" - if [ -z "$userIDKeyCache" ] ; then - return 1 - fi - if ! grep -q "^${userID}\$" "$AUTHORIZED_USER_IDS" ; then - read -p "user ID not currently authorized. authorize? [Y|n]: " OK; OK=${OK:=Y} - if [ ${OK/y/Y} = 'Y' ] ; then - log -n "adding user ID to authorized_user_ids file... " - echo "$userID" >> "$AUTHORIZED_USER_IDS" - echo "done." - else - log "authorized_user_ids file untouched." - fi - fi + for host ; do + # process the host, change return code if host key not found + process_host_known_hosts "$host" || returnCode=1 + + # touch the lockfile, for good measure. + lockfile-touch --oneshot "$KNOWN_HOSTS" + done + + # remove the lockfile + lockfile-remove "$KNOWN_HOSTS" + + return "$returnCode" +} + +# process known_hosts file, going through line-by-line, extract each +# host, and process with the host processing function +process_known_hosts() { + local returnCode + + # default return code is 0, which assumes a key was found for + # every host. code will be set to 1 if a key is not found for at + # least one host + returnCode=0 + + # take all the hosts from the known_hosts file (first field), grep + # out all the hashed hosts (lines starting with '|')... + for line in $(cat "$KNOWN_HOSTS" | meat | cut -d ' ' -f 1 | grep -v '^|.*$') ; do + # break up hosts into separate words + update_known_hosts $(echo "$line" | tr , ' ') || returnCode=1 + done + + return "$returnCode" } -# remove a userid from the authorized_user_ids file -remove_userid() { +# process uids for the authorized_keys file +process_uid_authorized_keys() { local userID + local ok + local keyid + local returnCode + + # default return code is 1, which assumes no key was found + returnCode=1 userID="$1" - log "processing userid: '$userID'" + log "processing user ID: $userID" - if ! grep -q "^${userID}\$" "$AUTHORIZED_USER_IDS" ; then - log "user ID not currently authorized." - return 1 - fi + for line in $(process_user_id "$userID") ; do + ok=$(echo "$line" | cut -d: -f1) + keyid=$(echo "$line" | cut -d: -f2) - log -n "removing user ID '$userID'... " - grep -v "$userID" "$AUTHORIZED_USER_IDS" | sponge "$AUTHORIZED_USER_IDS" - echo "done." + sshKey=$(gpg2ssh "$keyid") + # remove the old host key line + remove_line "$AUTHORIZED_KEYS" "$sshKey" + # if key OK, add new host line + if [ "$ok" -eq '0' ] ; then + ssh2authorized_keys "$userID" "$sshKey" >> "$AUTHORIZED_KEYS" + + # set return code to be 0, since a key was found + returnCode=0 + fi + done + + return "$returnCode" } -# process a host for addition to a known_host file -process_host() { - local host - local cacheDir - local hostKeyCachePath +# update the authorized_keys files from a list of user IDs on command +# line +update_authorized_keys() { + local userID + local returnCode - host="$1" - cacheDir="$2" + # default return code is 0, which assumes a key was found for + # every user ID. code will be set to 1 if a key is not found for + # at least one user ID + returnCode=0 - log "processing host: '$host'" + # set the trap to remove any lockfiles on exit + trap "lockfile-remove $AUTHORIZED_KEYS" EXIT - hostKeyCachePath=$(process_user_id "ssh://${host}" "$cacheDir") - if [ $? = 0 ] ; then - ssh-keygen -R "$host" -f "$USER_KNOWN_HOSTS" - cat "$hostKeyCachePath" >> "$USER_KNOWN_HOSTS" - fi -} + # create a lockfile on authorized_keys + lockfile-create "$AUTHORIZED_KEYS" -# process known_hosts file -# go through line-by-line, extract each host, and process with the -# host processing function -process_known_hosts() { - local knownHosts - local cacheDir - local hosts - local host + for userID ; do + # process the user ID, change return code if key not found for + # user ID + process_uid_authorized_keys "$userID" || returnCode=1 - knownHosts="$1" - cacheDir="$2" - - # take all the hosts from the known_hosts file (first field), - # grep out all the hashed hosts (lines starting with '|')... - cut -d ' ' -f 1 "$knownHosts" | \ - grep -v '^|.*$' | \ - while IFS=, read -r -a hosts ; do - # ...and process each host - for host in ${hosts[*]} ; do - process_host "$host" "$cacheDir" - done + # touch the lockfile, for good measure. + lockfile-touch --oneshot "$AUTHORIZED_KEYS" done -} -# update an authorized_keys file after first processing the -# authorized_user_ids file -update_authorized_keys() { - local msAuthorizedKeys - local userAuthorizedKeys - local cacheDir - - msAuthorizedKeys="$1" - userAuthorizedKeys="$2" - cacheDir="$3" - - process_authorized_ids "$AUTHORIZED_USER_IDS" "$cacheDir" - - # write output key file - log "writing monkeysphere authorized_keys file... " - touch "$msAuthorizedKeys" - if [ "$(ls "$cacheDir")" ] ; then - log -n "adding gpg keys... " - cat "$cacheDir"/* > "$msAuthorizedKeys" - echo "done." - else - log "no gpg keys to add." - fi - if [ "$userAuthorizedKeys" -a -s "$userAuthorizedKeys" ] ; then - log -n "adding user authorized_keys file... " - cat "$userAuthorizedKeys" >> "$msAuthorizedKeys" - echo "done." - fi - log "monkeysphere authorized_keys file generated:" - log "$msAuthorizedKeys" + # remove the lockfile + lockfile-remove "$AUTHORIZED_KEYS" + + return "$returnCode" } -# process an authorized_*_ids file -# go through line-by-line, extract each userid, and process -process_authorized_ids() { - local authorizedIDs - local cacheDir - local userID +# process an authorized_user_ids file for authorized_keys +process_authorized_user_ids() { + local userid + local returnCode - authorizedIDs="$1" - cacheDir="$2" + # default return code is 0, and is set to 1 if a key for a user ID + # is not found + returnCode=0 - # clean out keys file and remake keys directory - rm -rf "$cacheDir" - mkdir -p "$cacheDir" + authorizedUserIDs="$1" - # loop through all user ids in file - # FIXME: needs to handle authorized_keys options - cat "$authorizedIDs" | meat | \ - while read -r userID ; do - # process the userid - log "processing userid: '$userID'" - process_user_id "$userID" "$cacheDir" > /dev/null + # set the IFS to be newline for parsing the authorized_user_ids + # file. can't find it in BASH(1) (found it on the net), but it + # works. + IFS=$'\n' + for userid in $(cat "$authorizedUserIDs" | meat) ; do + update_authorized_keys "$userid" || returnCode=1 done + + return "$returnCode" } # EXPERIMENTAL (unused) process userids found in authorized_keys file # go through line-by-line, extract monkeysphere userids from comment # fields, and process each userid -process_userids_from_authorized_keys() { +# NOT WORKING +process_authorized_keys() { local authorizedKeys - local cacheDir local userID + local returnCode + + # default return code is 0, and is set to 1 if a key for a user + # is not found + returnCode=0 authorizedKeys="$1" - cacheDir="$2" # take all the monkeysphere userids from the authorized_keys file # comment field (third field) that starts with "MonkeySphere uid:" # FIXME: needs to handle authorized_keys options (field 0) - cat "$authorizedKeys" | \ + cat "$authorizedKeys" | meat | \ while read -r options keytype key comment ; do # if the comment field is empty, assume the third field was # the comment if [ -z "$comment" ] ; then comment="$key" fi - if ! echo "$comment" | grep '^MonkeySphere userID:.*$' ; then + + if echo "$comment" | egrep -v -q '^MonkeySphere[[:digit:]]{4}(-[[:digit:]]{2}){2}T[[:digit:]]{2}(:[[:digit:]]{2}){2}' ; then continue fi - userID=$(echo "$comment" | sed -e "/^MonkeySphere userID://") + userID=$(echo "$comment" | awk "{ print $2 }") if [ -z "$userID" ] ; then continue fi + # process the userid log "processing userid: '$userID'" - process_user_id "$userID" "$cacheDir" > /dev/null + process_user_id "$userID" > /dev/null || returnCode=1 done + + return "$returnCode" } +################################################## +### GPG HELPER FUNCTIONS + # retrieve key from web of trust, and set owner trust to "full" # if key is found. trust_key() { + local keyID + local trustLevel + + keyID="$1" + trustLevel="$2" + + if [ -z "$keyID" ] ; then + failure "You must specify key to trust." + fi + # get the key from the key server if ! gpg --keyserver "$KEYSERVER" --recv-key "$keyID" ; then - log "could not retrieve key '$keyID'" - return 1 + failure "Could not retrieve key '$keyID'." fi # get key fingerprint fingerprint=$(get_key_fingerprint "$keyID") + echo "key found:" + gpg --fingerprint "$fingerprint" + + while [ -z "$trustLevel" ] ; do + cat <