X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=src%2Fmonkeysphere-server;h=69395a4dbb449f4b6dee8e85455586aa955d7e7d;hb=46586fc0f24e24166a52c2a0efb3e2ab838eea81;hp=3259e3360166b0776c49d3e6b344b817587d1820;hpb=6fb350a883fa4d8b1bc9b5e01cc3b01c96354d08;p=monkeysphere.git

diff --git a/src/monkeysphere-server b/src/monkeysphere-server
index 3259e33..69395a4 100755
--- a/src/monkeysphere-server
+++ b/src/monkeysphere-server
@@ -100,17 +100,19 @@ gpg_authentication() {
     su_monkeysphere_user "gpg $@"
 }
 
-# output key information
-show_server_key() {
-    gpg_host --list-secret-keys --fingerprint
-}
-
 # output just key fingerprint
 fingerprint_server_key() {
     gpg_host --list-secret-keys --fingerprint --with-colons --fixed-list-mode | \
 	grep '^fpr:' | head -1 | cut -d: -f10
 }
 
+# output key information
+show_server_key() {
+    local fingerprint
+    fingerprint=$(fingerprint_server_key)
+    gpg_host --fingerprint --list-secret-key "$fingerprint"
+}
+
 # update authorized_keys for users
 update_users() {
     if [ "$1" ] ; then
@@ -371,61 +373,140 @@ EOF
 
 # add hostname user ID to server key
 add_hostname() {
+    local userID
+    local fingerprint
+    local tmpuidMatch
+    local line
+    local adduidCommand
+
     if [ -z "$1" ] ; then
 	failure "You must specify a hostname to add."
     fi
 
     userID="ssh://${1}"
 
-    if [ "$(gpg_host --list-key "=${userID}")" ] ; then
+    fingerprint=$(fingerprint_server_key)
+
+    # match to only ultimately trusted user IDs
+    tmpuidMatch="u:$(echo $userID | gpg_escape)"
+
+    # find the index of the requsted user ID
+    # NOTE: this is based on circumstantial evidence that the order of
+    # this output is the appropriate index
+    if line=$(gpg_host --list-keys --with-colons --fixed-list-mode "0x${fingerprint}"\! \
+	| egrep '^(uid|uat):' | cut -f2,10 -d: | grep -n -x -F "$tmpuidMatch") ; then
 	failure "Host userID '$userID' already exists."
     fi
 
-    fingerprint=$(fingerprint_server_key)
+    echo "The following user ID will be added to the host key:"
+    echo "  $userID"
+    read -p "Are you sure you would like to add this user ID? (y/N) " OK; OK=${OK:=N}
+    if [ ${OK/y/Y} != 'Y' ] ; then
+	failure "user ID not added."
+    fi
 
+    # edit-key script command to add user ID
     adduidCommand=$(cat <<EOF
 adduid
 $userID
 
 
-O
 save
 EOF
 	)
 
-    # add uid
-    echo "$adduidCommand" | gpg_host --quiet --command-fd 0 --edit-key "$fingerprint"
+    # execute edit-key script
+    if echo "$adduidCommand" | gpg_host --quiet --command-fd 0 --edit-key "0x${fingerprint}"\! ; then
+        # update trust db
+	gpg_host --check-trustdb
 
-    echo "NOTE: new host userID has not been published."
-    echo "Use '$PGRM publish-key' to publish these changes."
+	show_server_key
+
+	echo "NOTE: User ID added but key not published."
+	echo "Run '$PGRM publish-key' to publish the key"
+    else
+	failure "Problem adding user ID."
+    fi
 }
 
 # revoke hostname user ID to server key
 revoke_hostname() {
+    local userID
+    local fingerprint
+    local tmpuidMatch
+    local line
+    local uidIndex
+    local message
+    local revuidCommand
+
     if [ -z "$1" ] ; then
 	failure "You must specify a hostname to revoke."
     fi
 
-    failure "Sorry, not yet implemented."
+    userID="ssh://${1}"
+
+    fingerprint=$(fingerprint_server_key)
+
+    # match to only ultimately trusted user IDs
+    tmpuidMatch="u:$(echo $userID | gpg_escape)"
+
+    # find the index of the requsted user ID
+    # NOTE: this is based on circumstantial evidence that the order of
+    # this output is the appropriate index
+    if line=$(gpg_host --list-keys --with-colons --fixed-list-mode "0x${fingerprint}"\! \
+	| egrep '^(uid|uat):' | cut -f2,10 -d: | grep -n -x -F "$tmpuidMatch") ; then
+	uidIndex=${line%%:*}
+    else
+	failure "No non-revoked user ID '$userID' is found."
+    fi
+
+    echo "The following user ID will be revoked from the host key:"
+    echo "  $userID"
+    read -p "Are you sure you would like to revoke this user ID? (y/N) " OK; OK=${OK:=N}
+    if [ ${OK/y/Y} != 'Y' ] ; then
+	failure "user ID not revoked."
+    fi
+
+    message="Hostname removed by monkeysphere-server $DATE"
 
-    echo "NOTE: host userID revokation has not been published."
-    echo "Use '$PGRM publish-key' to publish these changes."
+    # edit-key script command to revoke user ID
+    revuidCommand=$(cat <<EOF
+$uidIndex
+revuid
+y
+4
+$message
+
+y
+save
+EOF
+	)	
+
+    # execute edit-key script
+    if echo "$revuidCommand" | gpg_host --quiet --command-fd 0 --edit-key "0x${fingerprint}"\! ; then
+        # update trust db
+	gpg_host --check-trustdb
+
+	show_server_key
+
+	echo "NOTE: User ID revoked but key not published."
+	echo "Run '$PGRM publish-key' to publish the key"
+    else
+	failure "Problem revoking user ID."
+    fi
 }
 
 # publish server key to keyserver
 publish_server_key() {
     read -p "Really publish host key to $KEYSERVER? (y/N) " OK; OK=${OK:=N}
     if [ ${OK/y/Y} != 'Y' ] ; then
-	failure "aborting."
+	failure "key not published."
     fi
 
     # find the key fingerprint
     fingerprint=$(fingerprint_server_key)
 
     # publish host key
-    # FIXME: need to figure out better way to identify host key
-    # dummy command so as not to publish fakes keys during testing
-    # eventually:
     gpg_authentication "--keyserver $KEYSERVER --send-keys $fingerprint"
 }
 
@@ -441,7 +522,10 @@ diagnostics() {
     local uid
     local fingerprint
     local badhostkeys
+    local sshd_config
 
+    # FIXME: what's the correct, cross-platform answer?
+    sshd_config=/etc/ssh/sshd_config
     seckey=$(fingerprint_server_key)
     keysfound=$(echo "$seckey" | grep -c ^sec:)
     curdate=$(date +%s)
@@ -518,14 +602,14 @@ diagnostics() {
 	    fi
 
 	    # propose changes needed for sshd_config (if any)
-	    if ! grep -q "^HostKey[[:space:]]\+${VARLIB}/ssh_host_rsa_key$" /etc/ssh/sshd_config; then
-		echo "! /etc/ssh/sshd_config does not point to the monkeysphere host key (${VARLIB}/ssh_host_rsa_key)."
-		echo " - Recommendation: add a line to /etc/ssh/sshd_config: 'HostKey ${VARLIB}/ssh_host_rsa_key'"
+	    if ! grep -q "^HostKey[[:space:]]\+${VARLIB}/ssh_host_rsa_key$" "$sshd_config"; then
+		echo "! $sshd_config does not point to the monkeysphere host key (${VARLIB}/ssh_host_rsa_key)."
+		echo " - Recommendation: add a line to $sshd_config: 'HostKey ${VARLIB}/ssh_host_rsa_key'"
 	    fi
-	    if badhostkeys=$(grep -i '^HostKey' | grep -q -v "^HostKey[[:space:]]\+${VARLIB}/ssh_host_rsa_key$") ; then
+	    if badhostkeys=$(grep -i '^HostKey' "$sshd_config" | grep -q -v "^HostKey[[:space:]]\+${VARLIB}/ssh_host_rsa_key$") ; then
 		echo "! /etc/sshd_config refers to some non-monkeysphere host keys:"
 		echo "$badhostkeys"
-		echo " - Recommendation: remove the above HostKey lines from /etc/ssh/sshd_config"
+		echo " - Recommendation: remove the above HostKey lines from $sshd_config"
 	    fi
 	fi
     fi
@@ -541,14 +625,14 @@ diagnostics() {
 
     echo "Checking for MonkeySphere-enabled public-key authentication for users ..."
     # Ensure that User ID authentication is enabled:
-    if ! grep -q "^AuthorizedKeysFile[[:space:]]\+${VARLIB}/authorized_keys/%u$" /etc/ssh/sshd_config; then
-	echo "! /etc/ssh/sshd_config does not point to monkeysphere authorized keys."
-	echo " - Recommendation: add a line to /etc/ssh/sshd_config: 'AuthorizedKeysFile ${VARLIB}/authorized_keys/%u'"
+    if ! grep -q "^AuthorizedKeysFile[[:space:]]\+${VARLIB}/authorized_keys/%u$" "$sshd_config"; then
+	echo "! $sshd_config does not point to monkeysphere authorized keys."
+	echo " - Recommendation: add a line to $sshd_config: 'AuthorizedKeysFile ${VARLIB}/authorized_keys/%u'"
     fi
-    if badauthorizedkeys=$(grep -i '^AuthorizedKeysFile' | grep -q -v "^AuthorizedKeysFile[[:space:]]\+${VARLIB}/authorized_keys/%u$") ; then
+    if badauthorizedkeys=$(grep -i '^AuthorizedKeysFile' "$sshd_config" | grep -q -v "^AuthorizedKeysFile[[:space:]]\+${VARLIB}/authorized_keys/%u$") ; then
 	echo "! /etc/sshd_config refers to non-monkeysphere authorized_keys files:"
 	echo "$badauthorizedkeys"
-	echo " - Recommendation: remove the above AuthorizedKeysFile lines from /etc/ssh/sshd_config"
+	echo " - Recommendation: remove the above AuthorizedKeysFile lines from $sshd_config"
     fi
 }
 
@@ -648,7 +732,7 @@ EOF
 	)
 
     # ltsign the key
-    echo "$ltsignCommand" | gpg_host --quiet --command-fd 0 --edit-key "$fingerprint"
+    echo "$ltsignCommand" | gpg_host --quiet --command-fd 0 --edit-key "0x${fingerprint}"\!
 
     # update the trustdb for the authentication keyring
     gpg_authentication "--check-trustdb"