X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=tests%2Fbasic;h=8d2b8f8768e2c25545626a368afc977a7d757446;hb=6b5b0fdfc95625892df654e4ae057a798e59d588;hp=83d69209d4265423d5c53048feed1fab56e51698;hpb=e836e3d6f26d1c2bd03d70a4b37a6cce26ebb69f;p=monkeysphere.git

diff --git a/tests/basic b/tests/basic
index 83d6920..8d2b8f8 100755
--- a/tests/basic
+++ b/tests/basic
@@ -2,23 +2,27 @@
 
 # Tests to ensure that the monkeysphere is working
 
-# Author: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
-# Date: 2008-09-13 13:40:15-0400
+# Authors: 
+#   Daniel Kahn Gillmor <dkg@fifthhorseman.net>
+#   Jameson Rollins <jrollins@fifthhorseman.net>
+# Copyright: 2008
+# License: GPL v3 or later
 
-# these tests might be best run under fakeroot, particularly the
-# "server-side" tests.  Using fakeroot, they should be able to be run
+# these tests should all be able to
 # as a non-privileged user.
 
-# NOTE: these tests have *not* themselves been tested yet
-# (2008-09-13).  Please exercise with caution!
-
-# fail on fail
+# all subcommands in this script should complete without failure:
 set -e
 
-# these tests assume a commonly-trusted "Admin's key", a fake key
-# permanently stored in ./home/admin/.gnupg:
+# gpg command for test admin user
 gpgadmin() {
-    GNUPGHOME="$TESTDIR"/home/admin/.gnupg gpg "$@"
+    GNUPGHOME="$TEMPDIR"/admin/.gnupg gpg "$@"
+}
+
+failed_cleanup() {
+# FIXME: can we be more verbose here?
+  echo 'FAILED!'
+  cleanup
 }
 
 # cleanup:
@@ -27,15 +31,19 @@ cleanup() {
     echo
     read -p "press enter to cleanup and remove tmp:"
 
-    echo "### stop sshd..."
-    kill "$SSHD_PID"
+    if ( ps $SSHD_PID >/dev/null ) ; then 
+	echo "### stopping still-running sshd..."
+	kill $SSHD_PID
+    fi
 
     echo "### removing temp dir..."
     rm -rf "$TEMPDIR"
+
+    wait
 }
 
 ## setup trap
-trap cleanup EXIT
+trap failed_cleanup EXIT
 
 ## set up some variables to ensure that we're operating strictly in
 ## the tests, not system-wide:
@@ -63,12 +71,31 @@ export MONKEYSPHERE_CHECK_KEYSERVER=false
 SSHD_CONFIG="$TEMPDIR"/sshd_config
 export SOCKET="$TEMPDIR"/ssh-socket
 
+# copy in admin and testuser home to tmp
+echo "### copying admin and testuser homes..."
+cp -a "$TESTDIR"/home/admin "$TEMPDIR"/
+cp -a "$TESTDIR"/home/testuser "$TEMPDIR"/
+
+cat <<EOF >> "$TEMPDIR"/testuser/.ssh/config
+UserKnownHostsFile $TEMPDIR/testuser/.ssh/known_hosts
+ProxyCommand $TEMPDIR/testuser/.ssh/proxy-command %h %p $SOCKET
+EOF
+
+cat <<EOF >> "$TEMPDIR"/testuser/.monkeysphere/monkeysphere.conf
+KNOWN_HOSTS=$TEMPDIR/testuser/.ssh/known_hosts
+EOF
+
+# set up a simple default monkeysphere-server.conf
+cat <<EOF >> "$TEMPDIR"/monkeysphere-server.conf
+AUTHORIZED_USER_IDS="$TEMPDIR/testuser/.monkeysphere/authorized_user_ids"
+EOF
 
 ### SERVER TESTS
 
 # setup monkeysphere temp gnupghome directories
 mkdir -p -m 750 "$MONKEYSPHERE_SYSDATADIR"/gnupg-host
 mkdir -p -m 700 "$MONKEYSPHERE_SYSDATADIR"/gnupg-authentication
+mkdir -p -m 700 "$MONKEYSPHERE_SYSDATADIR"/authorized_keys
 cat <<EOF > "$MONKEYSPHERE_SYSDATADIR"/gnupg-authentication/gpg.conf
 primary-keyring ${MONKEYSPHERE_SYSDATADIR}/gnupg-authentication/pubring.gpg
 keyring ${MONKEYSPHERE_SYSDATADIR}/gnupg-host/pubring.gpg
@@ -95,7 +122,7 @@ echo y | gpgadmin --command-fd 0 --sign-key "$HOSTKEYID"
 
 # add admin as identity certifier for testhost
 echo "### adding admin as certifier..."
-echo y | monkeysphere-server add-identity-certifier "$TESTDIR"/home/admin/.gnupg/pubkey.gpg
+echo y | monkeysphere-server add-identity-certifier "$TEMPDIR"/admin/.gnupg/pubkey.gpg
 
 # initialize base sshd_config
 cp etc/ssh/sshd_config "$SSHD_CONFIG"
@@ -107,32 +134,35 @@ EOF
 
 # launch test sshd with the new host key.
 echo "### starting sshd..."
-socat EXEC:"/usr/sbin/sshd -f ${SSHD_CONFIG} -i -d -d -d -D -e" "UNIX-LISTEN:${SOCKET}" 2> "$TEMPDIR"/sshd.log &
-
+socat EXEC:"/usr/sbin/sshd -f ${SSHD_CONFIG} -i -D -e" "UNIX-LISTEN:${SOCKET}" 2> "$TEMPDIR"/sshd.log &
 export SSHD_PID=$!
 
 ### TESTUSER TESTS
 
-# copy testuser home directory into temp dir
-echo "### seting up testuser home..."
-cp -r "$TESTDIR"/home/testuser "$TEMPDIR"/
-
 # generate an auth subkey for the test user
 echo "### generating key for testuser..."
-MONKEYSPHERE_GNUPGHOME="$TEMPDIR"/testuser/.gnupg \
-    monkeysphere gen-subkey --expire 0
+export GNUPGHOME="$TEMPDIR"/testuser/.gnupg
+export SSH_ASKPASS="$TEMPDIR"/testuser/.ssh/askpass
+export MONKEYSPHERE_HOME="$TEMPDIR"/testuser/.monkeysphere
+
+monkeysphere gen-subkey --expire 0
 
 # add server key to testuser keychain
 echo "### export server key to testuser..."
-gpgadmin --armor --export "$HOSTKEYID" | \
-    GNUPGHOME="$TEMPDIR"/testuser/.gnupg gpg --import
+gpgadmin --armor --export "$HOSTKEYID" | gpg --import
+
+# teach the "server" about the testuser's key
+echo "### export testuser key to server..."
+gpg --export testuser | monkeysphere-server gpg-authentication-cmd --import
+echo "### update server authorized_keys file for this testuser..."
+monkeysphere-server update-users "$USER"
 
-# connect to test sshd, using monkeysphere to verify the identity
-# before connection.
+# connect to test sshd, using monkeysphere-ssh-proxycommand to verify
+# the identity before connection.  This should work in both directions!
 echo "### testuser connecting to sshd socket..."
-PROXY_COMMAND="monkeysphere-ssh-proxycommand --no-connect %h && socat STDIO UNIX:${SOCKET}"
-GNUPGHOME="$TEMPDIR"/testuser/.gnupg ssh -oProxyCommand="$PROXY_COMMAND" testhost
 
-# create a new client side key, certify it with the "CA", use it to
-# log in.
-## FIXME: implement!
+ssh-agent bash -c \
+   "monkeysphere subkey-to-ssh-agent && ssh -F $TEMPDIR/testuser/.ssh/config testhost"
+
+trap - EXIT
+cleanup