X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=tests%2Fbasic;h=ceb996319cb1b77770fb620b7c157f5ab32acc74;hb=792f1e3324076f8521de33aa15f1dd7ba9c9a73f;hp=6eb0b2777eb1ee2268a33430c861147f6d9a2e94;hpb=2e7a44d1e4fa348849bc821ced6d04ace4006d3c;p=monkeysphere.git diff --git a/tests/basic b/tests/basic index 6eb0b27..ceb9963 100755 --- a/tests/basic +++ b/tests/basic @@ -10,7 +10,7 @@ # Jameson Rollins # Micah Anderson # -# Copyright: 2008-2009 +# Copyright: © 2008-2010 # License: GPL v3 or later # these tests should all be able to run as a non-privileged user. @@ -47,7 +47,7 @@ On debian-derived systems, you can set this up with: # gpg command for test admin user gpgadmin() { - chmod 0700 "$TEMPDIR"/admin + chmod 0700 "$TEMPDIR"/admin "$TEMPDIR"/admin/.gnupg GNUPGHOME="$TEMPDIR"/admin/.gnupg gpg --no-tty "$@" } @@ -90,6 +90,17 @@ ssh_test() { fi } +# invoke this instead of ssh_test() if you want this test to be +# skipped when the working directory has bad permissions. +ssh_good_perm_test() { + if [ "$TEMPDIR_PERMISSIONS_SAFE" = no ] ; then + echo "WARNING!!! Test SKIPPED because we are running in an unsafe working directory." + else + ssh_test "$@" + fi +} + + SSHD_PID= ## setup trap @@ -148,7 +159,7 @@ export DISPLAY=monkeys ## we cannot do proper directory permissions checking if the current ## working directory has unsatisfactory permissions: -if ( . "$MONKEYSPHERE_SYSSHAREDIR"/common && check_key_file_permissions $(whoami) "$TEMPDIR" ) ; then +if "$MONKEYSPHERE_SYSSHAREDIR"/checkperms $(whoami) "$TEMPDIR"; then echo "Permissions on temporary directory '$TEMPDIR' are OK for permissions checks." TEMPDIR_PERMISSIONS_SAFE=yes else @@ -168,9 +179,15 @@ else EOF - # FIXME: what should we do with this knowledge to make sure that - # the appropriate tests are handled properly? + # FIXME: what else should we do with this knowledge to make sure + # that the appropriate tests are handled properly? TEMPDIR_PERMISSIONS_SAFE=no + + # this is a new option (as of 0.26) to disable filesystem + # permission checks. + + # it should operate by analogy with StrictModes from sshd_config(5) + export MONKEYSPHERE_STRICT_MODES=false fi @@ -233,13 +250,13 @@ echo echo "##################################################" echo "### import host key..." ssh-keygen -b 1024 -t rsa -N '' -f "$TEMPDIR"/ssh_host_rsa_key -monkeysphere-host import-key "$TEMPDIR"/ssh_host_rsa_key testhost +monkeysphere-host import-key "$TEMPDIR"/ssh_host_rsa_key ssh://testhost echo echo "##################################################" echo "### getting host key fingerprint..." -HOSTKEYID=$( monkeysphere-host show-key | grep '^OpenPGP fingerprint: ' | cut -f3 -d\ ) -echo "$HOSTKEYID" +SSHHOSTKEYID=$( monkeysphere-host show-key | grep '^OpenPGP fingerprint: ' | cut -f3 -d\ ) +echo "$SSHHOSTKEYID" # change host key expiration echo @@ -253,8 +270,8 @@ monkeysphere-host set-expire 1 echo echo "##################################################" echo "### certifying server host key..." -< "$MONKEYSPHERE_SYSCONFIGDIR"/ssh_host_rsa_key.pub.gpg gpgadmin --import -echo y | gpgadmin --command-fd 0 --sign-key "$HOSTKEYID" +< "$MONKEYSPHERE_SYSCONFIGDIR"/host_keys.pub.gpg gpgadmin --import +echo y | gpgadmin --command-fd 0 --sign-key "$SSHHOSTKEYID" # FIXME: add revoker? @@ -304,7 +321,7 @@ monkeysphere gen-subkey echo echo "##################################################" echo "### export server key to testuser..." -gpgadmin --armor --export "$HOSTKEYID" | gpg --import +gpgadmin --armor --export "$SSHHOSTKEYID" | gpg --import # teach the "server" about the testuser's key echo @@ -323,6 +340,12 @@ monkeysphere-authentication update-users $(whoami) ###################################################################### ### TESTS +## see whether keys-for-userid works from the client's perspective: +echo +echo "##################################################" +echo "### testing monkeysphere keys-for-userid ..." +diff -q <( monkeysphere keys-for-userid ssh://testhost ) <( cut -f1,2 -d' ' < "$TEMPDIR"/ssh_host_rsa_key.pub ) + # connect to test sshd, using monkeysphere ssh-proxycommand to verify # the identity before connection. This should work in both directions! echo @@ -353,7 +376,7 @@ monkeysphere-authentication update-users $(whoami) echo echo "##################################################" echo "### ssh connection test for failure..." -ssh_test 255 +ssh_good_perm_test 255 chmod g-w "$TESTHOME"/.monkeysphere/authorized_user_ids echo echo "##################################################" @@ -363,7 +386,7 @@ monkeysphere-authentication update-users $(whoami) echo echo "##################################################" echo "### ssh connection test for failure..." -ssh_test 255 +ssh_good_perm_test 255 chmod o-w "$TESTHOME"/.monkeysphere/authorized_user_ids monkeysphere-authentication update-users $(whoami) @@ -391,7 +414,7 @@ monkeysphere-authentication update-users $(whoami) echo echo "##################################################" echo "### ssh connection test for failure..." -ssh_test 255 +ssh_good_perm_test 255 chmod o-w "$TESTHOME"/.monkeysphere.linktest echo echo "##################################################" @@ -410,7 +433,7 @@ monkeysphere-authentication update-users $(whoami) echo echo "##################################################" echo "### ssh connection test for failure..." -ssh_test 255 +ssh_good_perm_test 255 chmod o-w "$TESTHOME"/.monkeysphere.linktest # FIXME: implement check of link path, and uncomment this test # echo @@ -421,7 +444,7 @@ chmod o-w "$TESTHOME"/.monkeysphere.linktest # echo # echo "##################################################" # echo "### ssh connection test for failure..." -# ssh_test 255 +# ssh_good_perm_test 255 # chmod o-w "$TESTHOME"/.monkeysphere rm "$TESTHOME"/.monkeysphere/authorized_user_ids mv "$TESTHOME"/.monkeysphere/authorized_user_ids{.bak,} @@ -444,12 +467,12 @@ monkeysphere-authentication update-users $(whoami) echo echo "##################################################" echo "### ssh connection test for failure..." -ssh_test 255 +ssh_good_perm_test 255 chmod o-w "$TESTHOME"/.monkeysphere.linktest echo echo "##################################################" echo "### make .monkeysphere directory a relative symlink and updating..." -ln -sfn .monkeysphere{.linktest,} +ln -sfn .monkeysphere.linktest "$TESTHOME"/.monkeysphere monkeysphere-authentication update-users $(whoami) echo echo "##################################################" @@ -463,7 +486,7 @@ monkeysphere-authentication update-users $(whoami) echo echo "##################################################" echo "### ssh connection test for failure..." -ssh_test 255 +ssh_good_perm_test 255 chmod o-w "$TESTHOME"/.monkeysphere.linktest rm "$TESTHOME"/.monkeysphere mv "$TESTHOME"/.monkeysphere{.bak,} @@ -482,39 +505,37 @@ echo "### ssh connection test directly to 'testhost2' without new name..." target_hostname=testhost2 ssh_test 255 echo echo "##################################################" -echo "### add hostname, certify by admin, import by user..." -monkeysphere-host add-hostname testhost2 -< "$MONKEYSPHERE_SYSCONFIGDIR"/ssh_host_rsa_key.pub.gpg gpgadmin --import -printf "y\ny\n" | gpgadmin --command-fd 0 --sign-key "$HOSTKEYID" +echo "### add servicename, certify by admin, import by user..." +monkeysphere-host add-servicename ssh://testhost2 +< "$MONKEYSPHERE_SYSCONFIGDIR"/host_keys.pub.gpg gpgadmin --import +printf "y\ny\n" | gpgadmin --command-fd 0 --sign-key "$SSHHOSTKEYID" echo echo "##################################################" echo "### ssh connection test with hostname 'testhost2' added..." -gpgadmin --export "$HOSTKEYID" | gpg --import +gpgadmin --export "$SSHHOSTKEYID" | gpg --import gpg --check-trustdb ssh_test echo echo "##################################################" echo "### ssh connection test directly to 'testhost2' ..." -gpg --import <"$MONKEYSPHERE_SYSCONFIGDIR"/ssh_host_rsa_key.pub.gpg +gpg --import <"$MONKEYSPHERE_SYSCONFIGDIR"/host_keys.pub.gpg gpg --check-trustdb target_hostname=testhost2 ssh_test echo echo "##################################################" echo "### ssh connection test for failure with 'testhost2' revoked..." -monkeysphere-host revoke-hostname testhost2 -gpg --import <"$MONKEYSPHERE_SYSCONFIGDIR"/ssh_host_rsa_key.pub.gpg +monkeysphere-host revoke-servicename ssh://testhost2 +gpg --import <"$MONKEYSPHERE_SYSCONFIGDIR"/host_keys.pub.gpg gpg --check-trustdb target_hostname=testhost2 ssh_test 255 # FIXME: addtest: remove admin as id-certifier and check ssh failure # FIXME: addtest: how do we test that set-expire makes sense after new -# hostnames have been added? - -# FIXME: addtest: revoke the host key and check ssh failure +# servicenames have been added? # test to make sure things are OK after the previous tests: echo @@ -528,7 +549,7 @@ ssh_test echo echo "##################################################" -echo "### revoking host key..." +echo "### revoking ssh host key..." # generate the revocation certificate and feed it directly to the test # user's keyring (we're not publishing to the keyservers) monkeysphere-host revoke-key | gpg --import