+/**
+ * The following are defines for the bit fields in the PWM_O_STATUS register.
+ */
+/*\{*/
+#define PWM_STATUS_FAULT 0x00000001 ///< Fault Interrupt Status
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_CTL register.
+ */
+/*\{*/
+#define PWM_X_CTL_CMPBUPD 0x00000020 ///< Comparator B Update Mode
+#define PWM_X_CTL_CMPAUPD 0x00000010 ///< Comparator A Update Mode
+#define PWM_X_CTL_LOADUPD 0x00000008 ///< Load Register Update Mode
+#define PWM_X_CTL_DEBUG 0x00000004 ///< Debug Mode
+#define PWM_X_CTL_MODE 0x00000002 ///< Counter Mode
+#define PWM_X_CTL_ENABLE 0x00000001 ///< PWM Block Enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_INTEN register.
+ */
+/*\{*/
+#define PWM_X_INTEN_TRCMPBD 0x00002000 ///< Trigger for Counter=PWMnCMPB
+ ///< Down
+#define PWM_X_INTEN_TRCMPBU 0x00001000 ///< Trigger for Counter=PWMnCMPB Up
+#define PWM_X_INTEN_TRCMPAD 0x00000800 ///< Trigger for Counter=PWMnCMPA
+ ///< Down
+#define PWM_X_INTEN_TRCMPAU 0x00000400 ///< Trigger for Counter=PWMnCMPA Up
+#define PWM_X_INTEN_TRCNTLOAD 0x00000200 ///< Trigger for Counter=PWMnLOAD
+#define PWM_X_INTEN_TRCNTZERO 0x00000100 ///< Trigger for Counter=0
+#define PWM_X_INTEN_INTCMPBD 0x00000020 ///< Interrupt for Counter=PWMnCMPB
+ ///< Down
+#define PWM_X_INTEN_INTCMPBU 0x00000010 ///< Interrupt for Counter=PWMnCMPB
+ ///< Up
+#define PWM_X_INTEN_INTCMPAD 0x00000008 ///< Interrupt for Counter=PWMnCMPA
+ ///< Down
+#define PWM_X_INTEN_INTCMPAU 0x00000004 ///< Interrupt for Counter=PWMnCMPA
+ ///< Up
+#define PWM_X_INTEN_INTCNTLOAD 0x00000002 ///< Interrupt for Counter=PWMnLOAD
+#define PWM_X_INTEN_INTCNTZERO 0x00000001 ///< Interrupt for Counter=0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_RIS register.
+ */
+/*\{*/
+#define PWM_X_RIS_INTCMPBD 0x00000020 ///< Comparator B Down Interrupt
+ ///< Status
+#define PWM_X_RIS_INTCMPBU 0x00000010 ///< Comparator B Up Interrupt Status
+#define PWM_X_RIS_INTCMPAD 0x00000008 ///< Comparator A Down Interrupt
+ ///< Status
+#define PWM_X_RIS_INTCMPAU 0x00000004 ///< Comparator A Up Interrupt Status
+#define PWM_X_RIS_INTCNTLOAD 0x00000002 ///< Counter=Load Interrupt Status
+#define PWM_X_RIS_INTCNTZERO 0x00000001 ///< Counter=0 Interrupt Status
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_ISC register.
+ */
+/*\{*/
+#define PWM_X_ISC_INTCMPBD 0x00000020 ///< Comparator B Down Interrupt
+#define PWM_X_ISC_INTCMPBU 0x00000010 ///< Comparator B Up Interrupt
+#define PWM_X_ISC_INTCMPAD 0x00000008 ///< Comparator A Down Interrupt
+#define PWM_X_ISC_INTCMPAU 0x00000004 ///< Comparator A Up Interrupt
+#define PWM_X_ISC_INTCNTLOAD 0x00000002 ///< Counter=Load Interrupt
+#define PWM_X_ISC_INTCNTZERO 0x00000001 ///< Counter=0 Interrupt
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_LOAD register.
+ */
+/*\{*/
+#define PWM_X_LOAD_M 0x0000FFFF ///< Counter Load Value
+#define PWM_X_LOAD_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_COUNT register.
+ */
+/*\{*/
+#define PWM_X_COUNT_M 0x0000FFFF ///< Counter Value
+#define PWM_X_COUNT_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_CMPA register.
+ */
+/*\{*/
+#define PWM_X_CMPA_M 0x0000FFFF ///< Comparator A Value
+#define PWM_X_CMPA_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_CMPB register.
+ */
+/*\{*/
+#define PWM_X_CMPB_M 0x0000FFFF ///< Comparator B Value
+#define PWM_X_CMPB_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_GENA register.
+ */
+/*\{*/
+#define PWM_X_GENA_ACTCMPBD_M 0x00000C00 ///< Action for Comparator B Down
+#define PWM_X_GENA_ACTCMPBD_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENA_ACTCMPBD_INV 0x00000400 ///< Invert pwmA
+#define PWM_X_GENA_ACTCMPBD_ZERO 0x00000800 ///< Drive pwmA Low
+#define PWM_X_GENA_ACTCMPBD_ONE 0x00000C00 ///< Drive pwmA High
+#define PWM_X_GENA_ACTCMPBU_M 0x00000300 ///< Action for Comparator B Up
+#define PWM_X_GENA_ACTCMPBU_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENA_ACTCMPBU_INV 0x00000100 ///< Invert pwmA
+#define PWM_X_GENA_ACTCMPBU_ZERO 0x00000200 ///< Drive pwmA Low
+#define PWM_X_GENA_ACTCMPBU_ONE 0x00000300 ///< Drive pwmA High
+#define PWM_X_GENA_ACTCMPAD_M 0x000000C0 ///< Action for Comparator A Down
+#define PWM_X_GENA_ACTCMPAD_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENA_ACTCMPAD_INV 0x00000040 ///< Invert pwmA
+#define PWM_X_GENA_ACTCMPAD_ZERO 0x00000080 ///< Drive pwmA Low
+#define PWM_X_GENA_ACTCMPAD_ONE 0x000000C0 ///< Drive pwmA High
+#define PWM_X_GENA_ACTCMPAU_M 0x00000030 ///< Action for Comparator A Up
+#define PWM_X_GENA_ACTCMPAU_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENA_ACTCMPAU_INV 0x00000010 ///< Invert pwmA
+#define PWM_X_GENA_ACTCMPAU_ZERO 0x00000020 ///< Drive pwmA Low
+#define PWM_X_GENA_ACTCMPAU_ONE 0x00000030 ///< Drive pwmA High
+#define PWM_X_GENA_ACTLOAD_M 0x0000000C ///< Action for Counter=LOAD
+#define PWM_X_GENA_ACTLOAD_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENA_ACTLOAD_INV 0x00000004 ///< Invert pwmA
+#define PWM_X_GENA_ACTLOAD_ZERO 0x00000008 ///< Drive pwmA Low
+#define PWM_X_GENA_ACTLOAD_ONE 0x0000000C ///< Drive pwmA High
+#define PWM_X_GENA_ACTZERO_M 0x00000003 ///< Action for Counter=0
+#define PWM_X_GENA_ACTZERO_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENA_ACTZERO_INV 0x00000001 ///< Invert pwmA
+#define PWM_X_GENA_ACTZERO_ZERO 0x00000002 ///< Drive pwmA Low
+#define PWM_X_GENA_ACTZERO_ONE 0x00000003 ///< Drive pwmA High
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_GENB register.
+ */
+/*\{*/
+#define PWM_X_GENB_ACTCMPBD_M 0x00000C00 ///< Action for Comparator B Down
+#define PWM_X_GENB_ACTCMPBD_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENB_ACTCMPBD_INV 0x00000400 ///< Invert pwmB
+#define PWM_X_GENB_ACTCMPBD_ZERO 0x00000800 ///< Drive pwmB Low
+#define PWM_X_GENB_ACTCMPBD_ONE 0x00000C00 ///< Drive pwmB High
+#define PWM_X_GENB_ACTCMPBU_M 0x00000300 ///< Action for Comparator B Up
+#define PWM_X_GENB_ACTCMPBU_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENB_ACTCMPBU_INV 0x00000100 ///< Invert pwmB
+#define PWM_X_GENB_ACTCMPBU_ZERO 0x00000200 ///< Drive pwmB Low
+#define PWM_X_GENB_ACTCMPBU_ONE 0x00000300 ///< Drive pwmB High
+#define PWM_X_GENB_ACTCMPAD_M 0x000000C0 ///< Action for Comparator A Down
+#define PWM_X_GENB_ACTCMPAD_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENB_ACTCMPAD_INV 0x00000040 ///< Invert pwmB
+#define PWM_X_GENB_ACTCMPAD_ZERO 0x00000080 ///< Drive pwmB Low
+#define PWM_X_GENB_ACTCMPAD_ONE 0x000000C0 ///< Drive pwmB High
+#define PWM_X_GENB_ACTCMPAU_M 0x00000030 ///< Action for Comparator A Up
+#define PWM_X_GENB_ACTCMPAU_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENB_ACTCMPAU_INV 0x00000010 ///< Invert pwmB
+#define PWM_X_GENB_ACTCMPAU_ZERO 0x00000020 ///< Drive pwmB Low
+#define PWM_X_GENB_ACTCMPAU_ONE 0x00000030 ///< Drive pwmB High
+#define PWM_X_GENB_ACTLOAD_M 0x0000000C ///< Action for Counter=LOAD
+#define PWM_X_GENB_ACTLOAD_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENB_ACTLOAD_INV 0x00000004 ///< Invert pwmB
+#define PWM_X_GENB_ACTLOAD_ZERO 0x00000008 ///< Drive pwmB Low
+#define PWM_X_GENB_ACTLOAD_ONE 0x0000000C ///< Drive pwmB High
+#define PWM_X_GENB_ACTZERO_M 0x00000003 ///< Action for Counter=0
+#define PWM_X_GENB_ACTZERO_NONE 0x00000000 ///< Do nothing
+#define PWM_X_GENB_ACTZERO_INV 0x00000001 ///< Invert pwmB
+#define PWM_X_GENB_ACTZERO_ZERO 0x00000002 ///< Drive pwmB Low
+#define PWM_X_GENB_ACTZERO_ONE 0x00000003 ///< Drive pwmB High
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_DBCTL register.
+ */
+/*\{*/
+#define PWM_X_DBCTL_ENABLE 0x00000001 ///< Dead-Band Generator Enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_DBRISE register.
+ */
+/*\{*/
+#define PWM_X_DBRISE_DELAY_M 0x00000FFF ///< Dead-Band Rise Delay
+#define PWM_X_DBRISE_DELAY_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the PWM_O_X_DBFALL register.
+ */
+/*\{*/
+#define PWM_X_DBFALL_DELAY_M 0x00000FFF ///< Dead-Band Fall Delay
+#define PWM_X_DBFALL_DELAY_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_CTL register.
+ */
+/*\{*/
+#define QEI_CTL_STALLEN 0x00001000 ///< Stall QEI
+#define QEI_CTL_INVI 0x00000800 ///< Invert Index Pulse
+#define QEI_CTL_INVB 0x00000400 ///< Invert PhB
+#define QEI_CTL_INVA 0x00000200 ///< Invert PhA
+#define QEI_CTL_VELDIV_M 0x000001C0 ///< Predivide Velocity
+#define QEI_CTL_VELDIV_1 0x00000000 ///< QEI clock /1
+#define QEI_CTL_VELDIV_2 0x00000040 ///< QEI clock /2
+#define QEI_CTL_VELDIV_4 0x00000080 ///< QEI clock /4
+#define QEI_CTL_VELDIV_8 0x000000C0 ///< QEI clock /8
+#define QEI_CTL_VELDIV_16 0x00000100 ///< QEI clock /16
+#define QEI_CTL_VELDIV_32 0x00000140 ///< QEI clock /32
+#define QEI_CTL_VELDIV_64 0x00000180 ///< QEI clock /64
+#define QEI_CTL_VELDIV_128 0x000001C0 ///< QEI clock /128
+#define QEI_CTL_VELEN 0x00000020 ///< Capture Velocity
+#define QEI_CTL_RESMODE 0x00000010 ///< Reset Mode
+#define QEI_CTL_CAPMODE 0x00000008 ///< Capture Mode
+#define QEI_CTL_SIGMODE 0x00000004 ///< Signal Mode
+#define QEI_CTL_SWAP 0x00000002 ///< Swap Signals
+#define QEI_CTL_ENABLE 0x00000001 ///< Enable QEI
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_STAT register.
+ */
+/*\{*/
+#define QEI_STAT_DIRECTION 0x00000002 ///< Direction of Rotation
+#define QEI_STAT_ERROR 0x00000001 ///< Error Detected
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_POS register.
+ */
+/*\{*/
+#define QEI_POS_M 0xFFFFFFFF ///< Current Position Integrator Value
+#define QEI_POS_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_MAXPOS register.
+ */
+/*\{*/
+#define QEI_MAXPOS_M 0xFFFFFFFF ///< Maximum Position Integrator Value
+#define QEI_MAXPOS_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_LOAD register.
+ */
+/*\{*/
+#define QEI_LOAD_M 0xFFFFFFFF ///< Velocity Timer Load Value
+#define QEI_LOAD_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_TIME register.
+ */
+/*\{*/
+#define QEI_TIME_M 0xFFFFFFFF ///< Velocity Timer Current Value
+#define QEI_TIME_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_COUNT register.
+ */
+/*\{*/
+#define QEI_COUNT_M 0xFFFFFFFF ///< Velocity Pulse Count
+#define QEI_COUNT_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_SPEED register.
+ */
+/*\{*/
+#define QEI_SPEED_M 0xFFFFFFFF ///< Velocity
+#define QEI_SPEED_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_INTEN register.
+ */
+/*\{*/
+#define QEI_INTEN_ERROR 0x00000008 ///< Phase Error Interrupt Enable
+#define QEI_INTEN_DIR 0x00000004 ///< Direction Change Interrupt
+ ///< Enable
+#define QEI_INTEN_TIMER 0x00000002 ///< Timer Expires Interrupt Enable
+#define QEI_INTEN_INDEX 0x00000001 ///< Index Pulse Detected Interrupt
+ ///< Enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_RIS register.
+ */
+/*\{*/
+#define QEI_RIS_ERROR 0x00000008 ///< Phase Error Detected
+#define QEI_RIS_DIR 0x00000004 ///< Direction Change Detected
+#define QEI_RIS_TIMER 0x00000002 ///< Velocity Timer Expired
+#define QEI_RIS_INDEX 0x00000001 ///< Index Pulse Asserted
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the QEI_O_ISC register.
+ */
+/*\{*/
+#define QEI_ISC_ERROR 0x00000008 ///< Phase Error Interrupt
+#define QEI_ISC_DIR 0x00000004 ///< Direction Change Interrupt
+#define QEI_ISC_TIMER 0x00000002 ///< Velocity Timer Expired Interrupt
+#define QEI_ISC_INDEX 0x00000001 ///< Index Pulse Interrupt
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_CFG register.
+ */
+/*\{*/
+#define TIMER_CFG_M 0x00000007 ///< GPTM Configuration
+#define TIMER_CFG_32_BIT_TIMER 0x00000000 ///< 32-bit timer configuration
+#define TIMER_CFG_32_BIT_RTC 0x00000001 ///< 32-bit real-time clock (RTC)
+ ///< counter configuration
+#define TIMER_CFG_16_BIT 0x00000004 ///< 16-bit timer configuration. The
+ ///< function is controlled by bits
+ ///< 1:0 of GPTMTAMR and GPTMTBMR
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TAMR register.
+ */
+/*\{*/
+#define TIMER_TAMR_TAAMS 0x00000008 ///< GPTM Timer A Alternate Mode
+ ///< Select
+#define TIMER_TAMR_TACMR 0x00000004 ///< GPTM Timer A Capture Mode
+#define TIMER_TAMR_TAMR_M 0x00000003 ///< GPTM Timer A Mode
+#define TIMER_TAMR_TAMR_1_SHOT 0x00000001 ///< One-Shot Timer mode
+#define TIMER_TAMR_TAMR_PERIOD 0x00000002 ///< Periodic Timer mode
+#define TIMER_TAMR_TAMR_CAP 0x00000003 ///< Capture mode
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TBMR register.
+ */
+/*\{*/
+#define TIMER_TBMR_TBAMS 0x00000008 ///< GPTM Timer B Alternate Mode
+ ///< Select
+#define TIMER_TBMR_TBCMR 0x00000004 ///< GPTM Timer B Capture Mode
+#define TIMER_TBMR_TBMR_M 0x00000003 ///< GPTM Timer B Mode
+#define TIMER_TBMR_TBMR_1_SHOT 0x00000001 ///< One-Shot Timer mode
+#define TIMER_TBMR_TBMR_PERIOD 0x00000002 ///< Periodic Timer mode
+#define TIMER_TBMR_TBMR_CAP 0x00000003 ///< Capture mode
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_CTL register.
+ */
+/*\{*/
+#define TIMER_CTL_TBPWML 0x00004000 ///< GPTM Timer B PWM Output Level
+#define TIMER_CTL_TBOTE 0x00002000 ///< GPTM Timer B Output Trigger
+ ///< Enable
+#define TIMER_CTL_TBEVENT_M 0x00000C00 ///< GPTM Timer B Event Mode
+#define TIMER_CTL_TBEVENT_POS 0x00000000 ///< Positive edge
+#define TIMER_CTL_TBEVENT_NEG 0x00000400 ///< Negative edge
+#define TIMER_CTL_TBEVENT_BOTH 0x00000C00 ///< Both edges
+#define TIMER_CTL_TBSTALL 0x00000200 ///< GPTM Timer B Stall Enable
+#define TIMER_CTL_TBEN 0x00000100 ///< GPTM Timer B Enable
+#define TIMER_CTL_TAPWML 0x00000040 ///< GPTM Timer A PWM Output Level
+#define TIMER_CTL_TAOTE 0x00000020 ///< GPTM Timer A Output Trigger
+ ///< Enable
+#define TIMER_CTL_RTCEN 0x00000010 ///< GPTM RTC Enable
+#define TIMER_CTL_TAEVENT_M 0x0000000C ///< GPTM Timer A Event Mode
+#define TIMER_CTL_TAEVENT_POS 0x00000000 ///< Positive edge
+#define TIMER_CTL_TAEVENT_NEG 0x00000004 ///< Negative edge
+#define TIMER_CTL_TAEVENT_BOTH 0x0000000C ///< Both edges
+#define TIMER_CTL_TASTALL 0x00000002 ///< GPTM Timer A Stall Enable
+#define TIMER_CTL_TAEN 0x00000001 ///< GPTM Timer A Enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_IMR register.
+ */
+/*\{*/
+#define TIMER_IMR_CBEIM 0x00000400 ///< GPTM Capture B Event Interrupt
+ ///< Mask
+#define TIMER_IMR_CBMIM 0x00000200 ///< GPTM Capture B Match Interrupt
+ ///< Mask
+#define TIMER_IMR_TBTOIM 0x00000100 ///< GPTM Timer B Time-Out Interrupt
+ ///< Mask
+#define TIMER_IMR_RTCIM 0x00000008 ///< GPTM RTC Interrupt Mask
+#define TIMER_IMR_CAEIM 0x00000004 ///< GPTM Capture A Event Interrupt
+ ///< Mask
+#define TIMER_IMR_CAMIM 0x00000002 ///< GPTM Capture A Match Interrupt
+ ///< Mask
+#define TIMER_IMR_TATOIM 0x00000001 ///< GPTM Timer A Time-Out Interrupt
+ ///< Mask
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_RIS register.
+ */
+/*\{*/
+#define TIMER_RIS_CBERIS 0x00000400 ///< GPTM Capture B Event Raw
+ ///< Interrupt
+#define TIMER_RIS_CBMRIS 0x00000200 ///< GPTM Capture B Match Raw
+ ///< Interrupt
+#define TIMER_RIS_TBTORIS 0x00000100 ///< GPTM Timer B Time-Out Raw
+ ///< Interrupt
+#define TIMER_RIS_RTCRIS 0x00000008 ///< GPTM RTC Raw Interrupt
+#define TIMER_RIS_CAERIS 0x00000004 ///< GPTM Capture A Event Raw
+ ///< Interrupt
+#define TIMER_RIS_CAMRIS 0x00000002 ///< GPTM Capture A Match Raw
+ ///< Interrupt
+#define TIMER_RIS_TATORIS 0x00000001 ///< GPTM Timer A Time-Out Raw
+ ///< Interrupt
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_MIS register.
+ */
+/*\{*/
+#define TIMER_MIS_CBEMIS 0x00000400 ///< GPTM Capture B Event Masked
+ ///< Interrupt
+#define TIMER_MIS_CBMMIS 0x00000200 ///< GPTM Capture B Match Masked
+ ///< Interrupt
+#define TIMER_MIS_TBTOMIS 0x00000100 ///< GPTM Timer B Time-Out Masked
+ ///< Interrupt
+#define TIMER_MIS_RTCMIS 0x00000008 ///< GPTM RTC Masked Interrupt
+#define TIMER_MIS_CAEMIS 0x00000004 ///< GPTM Capture A Event Masked
+ ///< Interrupt
+#define TIMER_MIS_CAMMIS 0x00000002 ///< GPTM Capture A Match Masked
+ ///< Interrupt
+#define TIMER_MIS_TATOMIS 0x00000001 ///< GPTM Timer A Time-Out Masked
+ ///< Interrupt
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_ICR register.
+ */
+/*\{*/
+#define TIMER_ICR_CBECINT 0x00000400 ///< GPTM Capture B Event Interrupt
+ ///< Clear
+#define TIMER_ICR_CBMCINT 0x00000200 ///< GPTM Capture B Match Interrupt
+ ///< Clear
+#define TIMER_ICR_TBTOCINT 0x00000100 ///< GPTM Timer B Time-Out Interrupt
+ ///< Clear
+#define TIMER_ICR_RTCCINT 0x00000008 ///< GPTM RTC Interrupt Clear
+#define TIMER_ICR_CAECINT 0x00000004 ///< GPTM Capture A Event Interrupt
+ ///< Clear
+#define TIMER_ICR_CAMCINT 0x00000002 ///< GPTM Capture A Match Interrupt
+ ///< Clear
+#define TIMER_ICR_TATOCINT 0x00000001 ///< GPTM Timer A Time-Out Raw
+ ///< Interrupt
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TAILR register.
+ */
+/*\{*/
+#define TIMER_TAILR_TAILRH_M 0xFFFF0000 ///< GPTM Timer A Interval Load
+ ///< Register High
+#define TIMER_TAILR_TAILRL_M 0x0000FFFF ///< GPTM Timer A Interval Load
+ ///< Register Low
+#define TIMER_TAILR_TAILRH_S 16
+#define TIMER_TAILR_TAILRL_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TBILR register.
+ */
+/*\{*/
+#define TIMER_TBILR_TBILRL_M 0x0000FFFF ///< GPTM Timer B Interval Load
+ ///< Register
+#define TIMER_TBILR_TBILRL_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TAMATCHR
+* register.
+ */
+/*\{*/
+#define TIMER_TAMATCHR_TAMRH_M 0xFFFF0000 ///< GPTM Timer A Match Register High
+#define TIMER_TAMATCHR_TAMRL_M 0x0000FFFF ///< GPTM Timer A Match Register Low
+#define TIMER_TAMATCHR_TAMRH_S 16
+#define TIMER_TAMATCHR_TAMRL_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TBMATCHR
+* register.
+ */
+/*\{*/
+#define TIMER_TBMATCHR_TBMRL_M 0x0000FFFF ///< GPTM Timer B Match Register Low
+#define TIMER_TBMATCHR_TBMRL_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TAPR register.
+ */
+/*\{*/
+#define TIMER_TAPR_TAPSR_M 0x000000FF ///< GPTM Timer A Prescale
+#define TIMER_TAPR_TAPSR_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TBPR register.
+ */
+/*\{*/
+#define TIMER_TBPR_TBPSR_M 0x000000FF ///< GPTM Timer B Prescale
+#define TIMER_TBPR_TBPSR_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TAPMR register.
+ */
+/*\{*/
+#define TIMER_TAPMR_TAPSMR_M 0x000000FF ///< GPTM TimerA Prescale Match
+#define TIMER_TAPMR_TAPSMR_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TBPMR register.
+ */
+/*\{*/
+#define TIMER_TBPMR_TBPSMR_M 0x000000FF ///< GPTM TimerB Prescale Match
+#define TIMER_TBPMR_TBPSMR_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TAR register.
+ */
+/*\{*/
+#define TIMER_TAR_TARH_M 0xFFFF0000 ///< GPTM Timer A Register High
+#define TIMER_TAR_TARL_M 0x0000FFFF ///< GPTM Timer A Register Low
+#define TIMER_TAR_TARH_S 16
+#define TIMER_TAR_TARL_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the TIMER_O_TBR register.
+ */
+/*\{*/
+#define TIMER_TBR_TBRL_M 0x0000FFFF ///< GPTM Timer B
+#define TIMER_TBR_TBRL_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_ACTSS register.
+ */
+/*\{*/
+#define ADC_ACTSS_ASEN3 0x00000008 ///< ADC SS3 Enable
+#define ADC_ACTSS_ASEN2 0x00000004 ///< ADC SS2 Enable
+#define ADC_ACTSS_ASEN1 0x00000002 ///< ADC SS1 Enable
+#define ADC_ACTSS_ASEN0 0x00000001 ///< ADC SS0 Enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_RIS register.
+ */
+/*\{*/
+#define ADC_RIS_INR3 0x00000008 ///< SS3 Raw Interrupt Status
+#define ADC_RIS_INR2 0x00000004 ///< SS2 Raw Interrupt Status
+#define ADC_RIS_INR1 0x00000002 ///< SS1 Raw Interrupt Status
+#define ADC_RIS_INR0 0x00000001 ///< SS0 Raw Interrupt Status
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_IM register.
+ */
+/*\{*/
+#define ADC_IM_MASK3 0x00000008 ///< SS3 Interrupt Mask
+#define ADC_IM_MASK2 0x00000004 ///< SS2 Interrupt Mask
+#define ADC_IM_MASK1 0x00000002 ///< SS1 Interrupt Mask
+#define ADC_IM_MASK0 0x00000001 ///< SS0 Interrupt Mask
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_ISC register.
+ */
+/*\{*/
+#define ADC_ISC_IN3 0x00000008 ///< SS3 Interrupt Status and Clear
+#define ADC_ISC_IN2 0x00000004 ///< SS2 Interrupt Status and Clear
+#define ADC_ISC_IN1 0x00000002 ///< SS1 Interrupt Status and Clear
+#define ADC_ISC_IN0 0x00000001 ///< SS0 Interrupt Status and Clear
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_OSTAT register.
+ */
+/*\{*/
+#define ADC_OSTAT_OV3 0x00000008 ///< SS3 FIFO Overflow
+#define ADC_OSTAT_OV2 0x00000004 ///< SS2 FIFO Overflow
+#define ADC_OSTAT_OV1 0x00000002 ///< SS1 FIFO Overflow
+#define ADC_OSTAT_OV0 0x00000001 ///< SS0 FIFO Overflow
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_EMUX register.
+ */
+/*\{*/
+#define ADC_EMUX_EM3_M 0x0000F000 ///< SS3 Trigger Select
+#define ADC_EMUX_EM3_PROCESSOR 0x00000000 ///< Processor (default)
+#define ADC_EMUX_EM3_COMP0 0x00001000 ///< Analog Comparator 0
+#define ADC_EMUX_EM3_COMP1 0x00002000 ///< Analog Comparator 1
+#define ADC_EMUX_EM3_COMP2 0x00003000 ///< Analog Comparator 2
+#define ADC_EMUX_EM3_EXTERNAL 0x00004000 ///< External (GPIO PB4)
+#define ADC_EMUX_EM3_TIMER 0x00005000 ///< Timer
+#define ADC_EMUX_EM3_PWM0 0x00006000 ///< PWM0
+#define ADC_EMUX_EM3_PWM1 0x00007000 ///< PWM1
+#define ADC_EMUX_EM3_PWM2 0x00008000 ///< PWM2
+#define ADC_EMUX_EM3_ALWAYS 0x0000F000 ///< Always (continuously sample)
+#define ADC_EMUX_EM2_M 0x00000F00 ///< SS2 Trigger Select
+#define ADC_EMUX_EM2_PROCESSOR 0x00000000 ///< Processor (default)
+#define ADC_EMUX_EM2_COMP0 0x00000100 ///< Analog Comparator 0
+#define ADC_EMUX_EM2_COMP1 0x00000200 ///< Analog Comparator 1
+#define ADC_EMUX_EM2_COMP2 0x00000300 ///< Analog Comparator 2
+#define ADC_EMUX_EM2_EXTERNAL 0x00000400 ///< External (GPIO PB4)
+#define ADC_EMUX_EM2_TIMER 0x00000500 ///< Timer
+#define ADC_EMUX_EM2_PWM0 0x00000600 ///< PWM0
+#define ADC_EMUX_EM2_PWM1 0x00000700 ///< PWM1
+#define ADC_EMUX_EM2_PWM2 0x00000800 ///< PWM2
+#define ADC_EMUX_EM2_ALWAYS 0x00000F00 ///< Always (continuously sample)
+#define ADC_EMUX_EM1_M 0x000000F0 ///< SS1 Trigger Select
+#define ADC_EMUX_EM1_PROCESSOR 0x00000000 ///< Processor (default)
+#define ADC_EMUX_EM1_COMP0 0x00000010 ///< Analog Comparator 0
+#define ADC_EMUX_EM1_COMP1 0x00000020 ///< Analog Comparator 1
+#define ADC_EMUX_EM1_COMP2 0x00000030 ///< Analog Comparator 2
+#define ADC_EMUX_EM1_EXTERNAL 0x00000040 ///< External (GPIO PB4)
+#define ADC_EMUX_EM1_TIMER 0x00000050 ///< Timer
+#define ADC_EMUX_EM1_PWM0 0x00000060 ///< PWM0
+#define ADC_EMUX_EM1_PWM1 0x00000070 ///< PWM1
+#define ADC_EMUX_EM1_PWM2 0x00000080 ///< PWM2
+#define ADC_EMUX_EM1_ALWAYS 0x000000F0 ///< Always (continuously sample)
+#define ADC_EMUX_EM0_M 0x0000000F ///< SS0 Trigger Select
+#define ADC_EMUX_EM0_PROCESSOR 0x00000000 ///< Processor (default)
+#define ADC_EMUX_EM0_COMP0 0x00000001 ///< Analog Comparator 0
+#define ADC_EMUX_EM0_COMP1 0x00000002 ///< Analog Comparator 1
+#define ADC_EMUX_EM0_COMP2 0x00000003 ///< Analog Comparator 2
+#define ADC_EMUX_EM0_EXTERNAL 0x00000004 ///< External (GPIO PB4)
+#define ADC_EMUX_EM0_TIMER 0x00000005 ///< Timer
+#define ADC_EMUX_EM0_PWM0 0x00000006 ///< PWM0
+#define ADC_EMUX_EM0_PWM1 0x00000007 ///< PWM1
+#define ADC_EMUX_EM0_PWM2 0x00000008 ///< PWM2
+#define ADC_EMUX_EM0_ALWAYS 0x0000000F ///< Always (continuously sample)
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_USTAT register.
+ */
+/*\{*/
+#define ADC_USTAT_UV3 0x00000008 ///< SS3 FIFO Underflow
+#define ADC_USTAT_UV2 0x00000004 ///< SS2 FIFO Underflow
+#define ADC_USTAT_UV1 0x00000002 ///< SS1 FIFO Underflow
+#define ADC_USTAT_UV0 0x00000001 ///< SS0 FIFO Underflow
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSPRI register.
+ */
+/*\{*/
+#define ADC_SSPRI_SS3_M 0x00003000 ///< SS3 Priority
+#define ADC_SSPRI_SS3_1ST 0x00000000 ///< First priority
+#define ADC_SSPRI_SS3_2ND 0x00001000 ///< Second priority
+#define ADC_SSPRI_SS3_3RD 0x00002000 ///< Third priority
+#define ADC_SSPRI_SS3_4TH 0x00003000 ///< Fourth priority
+#define ADC_SSPRI_SS2_M 0x00000300 ///< SS2 Priority
+#define ADC_SSPRI_SS2_1ST 0x00000000 ///< First priority
+#define ADC_SSPRI_SS2_2ND 0x00000100 ///< Second priority
+#define ADC_SSPRI_SS2_3RD 0x00000200 ///< Third priority
+#define ADC_SSPRI_SS2_4TH 0x00000300 ///< Fourth priority
+#define ADC_SSPRI_SS1_M 0x00000030 ///< SS1 Priority
+#define ADC_SSPRI_SS1_1ST 0x00000000 ///< First priority
+#define ADC_SSPRI_SS1_2ND 0x00000010 ///< Second priority
+#define ADC_SSPRI_SS1_3RD 0x00000020 ///< Third priority
+#define ADC_SSPRI_SS1_4TH 0x00000030 ///< Fourth priority
+#define ADC_SSPRI_SS0_M 0x00000003 ///< SS0 Priority
+#define ADC_SSPRI_SS0_1ST 0x00000000 ///< First priority
+#define ADC_SSPRI_SS0_2ND 0x00000001 ///< Second priority
+#define ADC_SSPRI_SS0_3RD 0x00000002 ///< Third priority
+#define ADC_SSPRI_SS0_4TH 0x00000003 ///< Fourth priority
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_PSSI register.
+ */
+/*\{*/
+#define ADC_PSSI_SS3 0x00000008 ///< SS3 Initiate
+#define ADC_PSSI_SS2 0x00000004 ///< SS2 Initiate
+#define ADC_PSSI_SS1 0x00000002 ///< SS1 Initiate
+#define ADC_PSSI_SS0 0x00000001 ///< SS0 Initiate
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SAC register.
+ */
+/*\{*/
+#define ADC_SAC_AVG_M 0x00000007 ///< Hardware Averaging Control
+#define ADC_SAC_AVG_OFF 0x00000000 ///< No hardware oversampling
+#define ADC_SAC_AVG_2X 0x00000001 ///< 2x hardware oversampling
+#define ADC_SAC_AVG_4X 0x00000002 ///< 4x hardware oversampling
+#define ADC_SAC_AVG_8X 0x00000003 ///< 8x hardware oversampling
+#define ADC_SAC_AVG_16X 0x00000004 ///< 16x hardware oversampling
+#define ADC_SAC_AVG_32X 0x00000005 ///< 32x hardware oversampling
+#define ADC_SAC_AVG_64X 0x00000006 ///< 64x hardware oversampling
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSMUX0 register.
+ */
+/*\{*/
+#define ADC_SSMUX0_MUX7_M 0x70000000 ///< 8th Sample Input Select
+#define ADC_SSMUX0_MUX6_M 0x07000000 ///< 7th Sample Input Select
+#define ADC_SSMUX0_MUX5_M 0x00700000 ///< 6th Sample Input Select
+#define ADC_SSMUX0_MUX4_M 0x00070000 ///< 5th Sample Input Select
+#define ADC_SSMUX0_MUX3_M 0x00007000 ///< 4th Sample Input Select
+#define ADC_SSMUX0_MUX2_M 0x00000700 ///< 3rd Sample Input Select
+#define ADC_SSMUX0_MUX1_M 0x00000070 ///< 2nd Sample Input Select
+#define ADC_SSMUX0_MUX0_M 0x00000007 ///< 1st Sample Input Select
+#define ADC_SSMUX0_MUX7_S 28
+#define ADC_SSMUX0_MUX6_S 24
+#define ADC_SSMUX0_MUX5_S 20
+#define ADC_SSMUX0_MUX4_S 16
+#define ADC_SSMUX0_MUX3_S 12
+#define ADC_SSMUX0_MUX2_S 8
+#define ADC_SSMUX0_MUX1_S 4
+#define ADC_SSMUX0_MUX0_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSCTL0 register.
+ */
+/*\{*/
+#define ADC_SSCTL0_TS7 0x80000000 ///< 8th Sample Temp Sensor Select
+#define ADC_SSCTL0_IE7 0x40000000 ///< 8th Sample Interrupt Enable
+#define ADC_SSCTL0_END7 0x20000000 ///< 8th Sample is End of Sequence
+#define ADC_SSCTL0_D7 0x10000000 ///< 8th Sample Diff Input Select
+#define ADC_SSCTL0_TS6 0x08000000 ///< 7th Sample Temp Sensor Select
+#define ADC_SSCTL0_IE6 0x04000000 ///< 7th Sample Interrupt Enable
+#define ADC_SSCTL0_END6 0x02000000 ///< 7th Sample is End of Sequence
+#define ADC_SSCTL0_D6 0x01000000 ///< 7th Sample Diff Input Select
+#define ADC_SSCTL0_TS5 0x00800000 ///< 6th Sample Temp Sensor Select
+#define ADC_SSCTL0_IE5 0x00400000 ///< 6th Sample Interrupt Enable
+#define ADC_SSCTL0_END5 0x00200000 ///< 6th Sample is End of Sequence
+#define ADC_SSCTL0_D5 0x00100000 ///< 6th Sample Diff Input Select
+#define ADC_SSCTL0_TS4 0x00080000 ///< 5th Sample Temp Sensor Select
+#define ADC_SSCTL0_IE4 0x00040000 ///< 5th Sample Interrupt Enable
+#define ADC_SSCTL0_END4 0x00020000 ///< 5th Sample is End of Sequence
+#define ADC_SSCTL0_D4 0x00010000 ///< 5th Sample Diff Input Select
+#define ADC_SSCTL0_TS3 0x00008000 ///< 4th Sample Temp Sensor Select
+#define ADC_SSCTL0_IE3 0x00004000 ///< 4th Sample Interrupt Enable
+#define ADC_SSCTL0_END3 0x00002000 ///< 4th Sample is End of Sequence
+#define ADC_SSCTL0_D3 0x00001000 ///< 4th Sample Diff Input Select
+#define ADC_SSCTL0_TS2 0x00000800 ///< 3rd Sample Temp Sensor Select
+#define ADC_SSCTL0_IE2 0x00000400 ///< 3rd Sample Interrupt Enable
+#define ADC_SSCTL0_END2 0x00000200 ///< 3rd Sample is End of Sequence
+#define ADC_SSCTL0_D2 0x00000100 ///< 3rd Sample Diff Input Select
+#define ADC_SSCTL0_TS1 0x00000080 ///< 2nd Sample Temp Sensor Select
+#define ADC_SSCTL0_IE1 0x00000040 ///< 2nd Sample Interrupt Enable
+#define ADC_SSCTL0_END1 0x00000020 ///< 2nd Sample is End of Sequence
+#define ADC_SSCTL0_D1 0x00000010 ///< 2nd Sample Diff Input Select
+#define ADC_SSCTL0_TS0 0x00000008 ///< 1st Sample Temp Sensor Select
+#define ADC_SSCTL0_IE0 0x00000004 ///< 1st Sample Interrupt Enable
+#define ADC_SSCTL0_END0 0x00000002 ///< 1st Sample is End of Sequence
+#define ADC_SSCTL0_D0 0x00000001 ///< 1st Sample Diff Input Select
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSFIFO0 register.
+ */
+/*\{*/
+#define ADC_SSFIFO0_DATA_M 0x000003FF ///< Conversion Result Data
+#define ADC_SSFIFO0_DATA_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSFSTAT0 register.
+ */
+/*\{*/
+#define ADC_SSFSTAT0_FULL 0x00001000 ///< FIFO Full
+#define ADC_SSFSTAT0_EMPTY 0x00000100 ///< FIFO Empty
+#define ADC_SSFSTAT0_HPTR_M 0x000000F0 ///< FIFO Head Pointer
+#define ADC_SSFSTAT0_TPTR_M 0x0000000F ///< FIFO Tail Pointer
+#define ADC_SSFSTAT0_HPTR_S 4
+#define ADC_SSFSTAT0_TPTR_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSMUX1 register.
+ */
+/*\{*/
+#define ADC_SSMUX1_MUX3_M 0x00007000 ///< 4th Sample Input Select
+#define ADC_SSMUX1_MUX2_M 0x00000700 ///< 3rd Sample Input Select
+#define ADC_SSMUX1_MUX1_M 0x00000070 ///< 2nd Sample Input Select
+#define ADC_SSMUX1_MUX0_M 0x00000007 ///< 1st Sample Input Select
+#define ADC_SSMUX1_MUX3_S 12
+#define ADC_SSMUX1_MUX2_S 8
+#define ADC_SSMUX1_MUX1_S 4
+#define ADC_SSMUX1_MUX0_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSCTL1 register.
+ */
+/*\{*/
+#define ADC_SSCTL1_TS3 0x00008000 ///< 4th Sample Temp Sensor Select
+#define ADC_SSCTL1_IE3 0x00004000 ///< 4th Sample Interrupt Enable
+#define ADC_SSCTL1_END3 0x00002000 ///< 4th Sample is End of Sequence
+#define ADC_SSCTL1_D3 0x00001000 ///< 4th Sample Diff Input Select
+#define ADC_SSCTL1_TS2 0x00000800 ///< 3rd Sample Temp Sensor Select
+#define ADC_SSCTL1_IE2 0x00000400 ///< 3rd Sample Interrupt Enable
+#define ADC_SSCTL1_END2 0x00000200 ///< 3rd Sample is End of Sequence
+#define ADC_SSCTL1_D2 0x00000100 ///< 3rd Sample Diff Input Select
+#define ADC_SSCTL1_TS1 0x00000080 ///< 2nd Sample Temp Sensor Select
+#define ADC_SSCTL1_IE1 0x00000040 ///< 2nd Sample Interrupt Enable
+#define ADC_SSCTL1_END1 0x00000020 ///< 2nd Sample is End of Sequence
+#define ADC_SSCTL1_D1 0x00000010 ///< 2nd Sample Diff Input Select
+#define ADC_SSCTL1_TS0 0x00000008 ///< 1st Sample Temp Sensor Select
+#define ADC_SSCTL1_IE0 0x00000004 ///< 1st Sample Interrupt Enable
+#define ADC_SSCTL1_END0 0x00000002 ///< 1st Sample is End of Sequence
+#define ADC_SSCTL1_D0 0x00000001 ///< 1st Sample Diff Input Select
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSFIFO1 register.
+ */
+/*\{*/
+#define ADC_SSFIFO1_DATA_M 0x000003FF ///< Conversion Result Data
+#define ADC_SSFIFO1_DATA_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSFSTAT1 register.
+ */
+/*\{*/
+#define ADC_SSFSTAT1_FULL 0x00001000 ///< FIFO Full
+#define ADC_SSFSTAT1_EMPTY 0x00000100 ///< FIFO Empty
+#define ADC_SSFSTAT1_HPTR_M 0x000000F0 ///< FIFO Head Pointer
+#define ADC_SSFSTAT1_TPTR_M 0x0000000F ///< FIFO Tail Pointer
+#define ADC_SSFSTAT1_HPTR_S 4
+#define ADC_SSFSTAT1_TPTR_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSMUX2 register.
+ */
+/*\{*/
+#define ADC_SSMUX2_MUX3_M 0x00007000 ///< 4th Sample Input Select
+#define ADC_SSMUX2_MUX2_M 0x00000700 ///< 3rd Sample Input Select
+#define ADC_SSMUX2_MUX1_M 0x00000070 ///< 2nd Sample Input Select
+#define ADC_SSMUX2_MUX0_M 0x00000007 ///< 1st Sample Input Select
+#define ADC_SSMUX2_MUX3_S 12
+#define ADC_SSMUX2_MUX2_S 8
+#define ADC_SSMUX2_MUX1_S 4
+#define ADC_SSMUX2_MUX0_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSCTL2 register.
+ */
+/*\{*/
+#define ADC_SSCTL2_TS3 0x00008000 ///< 4th Sample Temp Sensor Select
+#define ADC_SSCTL2_IE3 0x00004000 ///< 4th Sample Interrupt Enable
+#define ADC_SSCTL2_END3 0x00002000 ///< 4th Sample is End of Sequence
+#define ADC_SSCTL2_D3 0x00001000 ///< 4th Sample Diff Input Select
+#define ADC_SSCTL2_TS2 0x00000800 ///< 3rd Sample Temp Sensor Select
+#define ADC_SSCTL2_IE2 0x00000400 ///< 3rd Sample Interrupt Enable
+#define ADC_SSCTL2_END2 0x00000200 ///< 3rd Sample is End of Sequence
+#define ADC_SSCTL2_D2 0x00000100 ///< 3rd Sample Diff Input Select
+#define ADC_SSCTL2_TS1 0x00000080 ///< 2nd Sample Temp Sensor Select
+#define ADC_SSCTL2_IE1 0x00000040 ///< 2nd Sample Interrupt Enable
+#define ADC_SSCTL2_END1 0x00000020 ///< 2nd Sample is End of Sequence
+#define ADC_SSCTL2_D1 0x00000010 ///< 2nd Sample Diff Input Select
+#define ADC_SSCTL2_TS0 0x00000008 ///< 1st Sample Temp Sensor Select
+#define ADC_SSCTL2_IE0 0x00000004 ///< 1st Sample Interrupt Enable
+#define ADC_SSCTL2_END0 0x00000002 ///< 1st Sample is End of Sequence
+#define ADC_SSCTL2_D0 0x00000001 ///< 1st Sample Diff Input Select
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSFIFO2 register.
+ */
+/*\{*/
+#define ADC_SSFIFO2_DATA_M 0x000003FF ///< Conversion Result Data
+#define ADC_SSFIFO2_DATA_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSFSTAT2 register.
+ */
+/*\{*/
+#define ADC_SSFSTAT2_FULL 0x00001000 ///< FIFO Full
+#define ADC_SSFSTAT2_EMPTY 0x00000100 ///< FIFO Empty
+#define ADC_SSFSTAT2_HPTR_M 0x000000F0 ///< FIFO Head Pointer
+#define ADC_SSFSTAT2_TPTR_M 0x0000000F ///< FIFO Tail Pointer
+#define ADC_SSFSTAT2_HPTR_S 4
+#define ADC_SSFSTAT2_TPTR_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSMUX3 register.
+ */
+/*\{*/
+#define ADC_SSMUX3_MUX0_M 0x00000007 ///< 1st Sample Input Select
+#define ADC_SSMUX3_MUX0_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSCTL3 register.
+ */
+/*\{*/
+#define ADC_SSCTL3_TS0 0x00000008 ///< 1st Sample Temp Sensor Select
+#define ADC_SSCTL3_IE0 0x00000004 ///< 1st Sample Interrupt Enable
+#define ADC_SSCTL3_END0 0x00000002 ///< 1st Sample is End of Sequence
+#define ADC_SSCTL3_D0 0x00000001 ///< 1st Sample Diff Input Select
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSFIFO3 register.
+ */
+/*\{*/
+#define ADC_SSFIFO3_DATA_M 0x000003FF ///< Conversion Result Data
+#define ADC_SSFIFO3_DATA_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_SSFSTAT3 register.
+ */
+/*\{*/
+#define ADC_SSFSTAT3_FULL 0x00001000 ///< FIFO Full
+#define ADC_SSFSTAT3_EMPTY 0x00000100 ///< FIFO Empty
+#define ADC_SSFSTAT3_HPTR_M 0x000000F0 ///< FIFO Head Pointer
+#define ADC_SSFSTAT3_TPTR_M 0x0000000F ///< FIFO Tail Pointer
+#define ADC_SSFSTAT3_HPTR_S 4
+#define ADC_SSFSTAT3_TPTR_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the ADC_O_TMLB register.
+ */
+/*\{*/
+#define ADC_TMLB_LB 0x00000001 ///< Loopback Mode Enable
+/*\}*/
+
+/**
+ * The following are defines for the the interpretation of the data in the
+* SSFIFOx when the ADC TMLB is enabled.
+ */
+/*\{*/
+#define ADC_SSFIFO_TMLB_CNT_M 0x000003C0 ///< Continuous Sample Counter
+#define ADC_SSFIFO_TMLB_CONT 0x00000020 ///< Continuation Sample Indicator
+#define ADC_SSFIFO_TMLB_DIFF 0x00000010 ///< Differential Sample Indicator
+#define ADC_SSFIFO_TMLB_TS 0x00000008 ///< Temp Sensor Sample Indicator
+#define ADC_SSFIFO_TMLB_MUX_M 0x00000007 ///< Analog Input Indicator
+#define ADC_SSFIFO_TMLB_CNT_S 6 ///< Sample counter shift
+#define ADC_SSFIFO_TMLB_MUX_S 0 ///< Input channel number shift
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the COMP_O_ACMIS register.
+ */
+/*\{*/
+#define COMP_ACMIS_IN2 0x00000004 ///< Comparator 2 Masked Interrupt
+ ///< Status
+#define COMP_ACMIS_IN1 0x00000002 ///< Comparator 1 Masked Interrupt
+ ///< Status
+#define COMP_ACMIS_IN0 0x00000001 ///< Comparator 0 Masked Interrupt
+ ///< Status
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the COMP_O_ACRIS register.
+ */
+/*\{*/
+#define COMP_ACRIS_IN2 0x00000004 ///< Comparator 2 Interrupt Status
+#define COMP_ACRIS_IN1 0x00000002 ///< Comparator 1 Interrupt Status
+#define COMP_ACRIS_IN0 0x00000001 ///< Comparator 0 Interrupt Status
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the COMP_O_ACINTEN register.
+ */
+/*\{*/
+#define COMP_ACINTEN_IN2 0x00000004 ///< Comparator 2 Interrupt Enable
+#define COMP_ACINTEN_IN1 0x00000002 ///< Comparator 1 Interrupt Enable
+#define COMP_ACINTEN_IN0 0x00000001 ///< Comparator 0 Interrupt Enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the COMP_O_ACREFCTL
+* register.
+ */
+/*\{*/
+#define COMP_ACREFCTL_EN 0x00000200 ///< Resistor Ladder Enable
+#define COMP_ACREFCTL_RNG 0x00000100 ///< Resistor Ladder Range
+#define COMP_ACREFCTL_VREF_M 0x0000000F ///< Resistor Ladder Voltage Ref
+#define COMP_ACREFCTL_VREF_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the COMP_O_ACSTAT0 register.
+ */
+/*\{*/
+#define COMP_ACSTAT0_OVAL 0x00000002 ///< Comparator Output Value
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the COMP_O_ACCTL0 register.
+ */
+/*\{*/
+#define COMP_ACCTL0_TOEN 0x00000800 ///< Trigger Output Enable
+#define COMP_ACCTL0_ASRCP_M 0x00000600 ///< Analog Source Positive
+#define COMP_ACCTL0_ASRCP_PIN 0x00000000 ///< Pin value of Cn+
+#define COMP_ACCTL0_ASRCP_PIN0 0x00000200 ///< Pin value of C0+
+#define COMP_ACCTL0_ASRCP_REF 0x00000400 ///< Internal voltage reference
+ ///< (VIREF)
+#define COMP_ACCTL0_TSLVAL 0x00000080 ///< Trigger Sense Level Value
+#define COMP_ACCTL0_TSEN_M 0x00000060 ///< Trigger Sense
+#define COMP_ACCTL0_TSEN_LEVEL 0x00000000 ///< Level sense, see TSLVAL
+#define COMP_ACCTL0_TSEN_FALL 0x00000020 ///< Falling edge
+#define COMP_ACCTL0_TSEN_RISE 0x00000040 ///< Rising edge
+#define COMP_ACCTL0_TSEN_BOTH 0x00000060 ///< Either edge
+#define COMP_ACCTL0_ISLVAL 0x00000010 ///< Interrupt Sense Level Value
+#define COMP_ACCTL0_ISEN_M 0x0000000C ///< Interrupt Sense
+#define COMP_ACCTL0_ISEN_LEVEL 0x00000000 ///< Level sense, see ISLVAL
+#define COMP_ACCTL0_ISEN_FALL 0x00000004 ///< Falling edge
+#define COMP_ACCTL0_ISEN_RISE 0x00000008 ///< Rising edge
+#define COMP_ACCTL0_ISEN_BOTH 0x0000000C ///< Either edge
+#define COMP_ACCTL0_CINV 0x00000002 ///< Comparator Output Invert
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the COMP_O_ACSTAT1 register.
+ */
+/*\{*/
+#define COMP_ACSTAT1_OVAL 0x00000002 ///< Comparator Output Value
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the COMP_O_ACCTL1 register.
+ */
+/*\{*/
+#define COMP_ACCTL1_TOEN 0x00000800 ///< Trigger Output Enable
+#define COMP_ACCTL1_ASRCP_M 0x00000600 ///< Analog Source Positive
+#define COMP_ACCTL1_ASRCP_PIN 0x00000000 ///< Pin value of Cn+
+#define COMP_ACCTL1_ASRCP_PIN0 0x00000200 ///< Pin value of C0+
+#define COMP_ACCTL1_ASRCP_REF 0x00000400 ///< Internal voltage reference
+ ///< (VIREF)
+#define COMP_ACCTL1_TSLVAL 0x00000080 ///< Trigger Sense Level Value
+#define COMP_ACCTL1_TSEN_M 0x00000060 ///< Trigger Sense
+#define COMP_ACCTL1_TSEN_LEVEL 0x00000000 ///< Level sense, see TSLVAL
+#define COMP_ACCTL1_TSEN_FALL 0x00000020 ///< Falling edge
+#define COMP_ACCTL1_TSEN_RISE 0x00000040 ///< Rising edge
+#define COMP_ACCTL1_TSEN_BOTH 0x00000060 ///< Either edge
+#define COMP_ACCTL1_ISLVAL 0x00000010 ///< Interrupt Sense Level Value
+#define COMP_ACCTL1_ISEN_M 0x0000000C ///< Interrupt Sense
+#define COMP_ACCTL1_ISEN_LEVEL 0x00000000 ///< Level sense, see ISLVAL
+#define COMP_ACCTL1_ISEN_FALL 0x00000004 ///< Falling edge
+#define COMP_ACCTL1_ISEN_RISE 0x00000008 ///< Rising edge
+#define COMP_ACCTL1_ISEN_BOTH 0x0000000C ///< Either edge
+#define COMP_ACCTL1_CINV 0x00000002 ///< Comparator Output Invert
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the COMP_O_ACSTAT2 register.
+ */
+/*\{*/
+#define COMP_ACSTAT2_OVAL 0x00000002 ///< Comparator Output Value
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the COMP_O_ACCTL2 register.
+ */
+/*\{*/
+#define COMP_ACCTL2_TOEN 0x00000800 ///< Trigger Output Enable
+#define COMP_ACCTL2_ASRCP_M 0x00000600 ///< Analog Source Positive
+#define COMP_ACCTL2_ASRCP_PIN 0x00000000 ///< Pin value of Cn+
+#define COMP_ACCTL2_ASRCP_PIN0 0x00000200 ///< Pin value of C0+
+#define COMP_ACCTL2_ASRCP_REF 0x00000400 ///< Internal voltage reference
+ ///< (VIREF)
+#define COMP_ACCTL2_TSLVAL 0x00000080 ///< Trigger Sense Level Value
+#define COMP_ACCTL2_TSEN_M 0x00000060 ///< Trigger Sense
+#define COMP_ACCTL2_TSEN_LEVEL 0x00000000 ///< Level sense, see TSLVAL
+#define COMP_ACCTL2_TSEN_FALL 0x00000020 ///< Falling edge
+#define COMP_ACCTL2_TSEN_RISE 0x00000040 ///< Rising edge
+#define COMP_ACCTL2_TSEN_BOTH 0x00000060 ///< Either edge
+#define COMP_ACCTL2_ISLVAL 0x00000010 ///< Interrupt Sense Level Value
+#define COMP_ACCTL2_ISEN_M 0x0000000C ///< Interrupt Sense
+#define COMP_ACCTL2_ISEN_LEVEL 0x00000000 ///< Level sense, see ISLVAL
+#define COMP_ACCTL2_ISEN_FALL 0x00000004 ///< Falling edge
+#define COMP_ACCTL2_ISEN_RISE 0x00000008 ///< Rising edge
+#define COMP_ACCTL2_ISEN_BOTH 0x0000000C ///< Either edge
+#define COMP_ACCTL2_CINV 0x00000002 ///< Comparator Output Invert
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_RTCC register.
+ */
+/*\{*/
+#define HIB_RTCC_M 0xFFFFFFFF ///< RTC Counter
+#define HIB_RTCC_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_RTCM0 register.
+ */
+/*\{*/
+#define HIB_RTCM0_M 0xFFFFFFFF ///< RTC Match 0
+#define HIB_RTCM0_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_RTCM1 register.
+ */
+/*\{*/
+#define HIB_RTCM1_M 0xFFFFFFFF ///< RTC Match 1
+#define HIB_RTCM1_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_RTCLD register.
+ */
+/*\{*/
+#define HIB_RTCLD_M 0xFFFFFFFF ///< RTC Load
+#define HIB_RTCLD_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_CTL register.
+ */
+/*\{*/
+#define HIB_CTL_VABORT 0x00000080 ///< Power Cut Abort Enable
+#define HIB_CTL_CLK32EN 0x00000040 ///< Clocking Enable
+#define HIB_CTL_LOWBATEN 0x00000020 ///< Low Battery Monitoring Enable
+#define HIB_CTL_PINWEN 0x00000010 ///< External WAKE Pin Enable
+#define HIB_CTL_RTCWEN 0x00000008 ///< RTC Wake-up Enable
+#define HIB_CTL_CLKSEL 0x00000004 ///< Hibernation Module Clock Select
+#define HIB_CTL_HIBREQ 0x00000002 ///< Hibernation Request
+#define HIB_CTL_RTCEN 0x00000001 ///< RTC Timer Enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_IM register.
+ */
+/*\{*/
+#define HIB_IM_EXTW 0x00000008 ///< External Wake-Up Interrupt Mask
+#define HIB_IM_LOWBAT 0x00000004 ///< Low Battery Voltage Interrupt
+ ///< Mask
+#define HIB_IM_RTCALT1 0x00000002 ///< RTC Alert 1 Interrupt Mask
+#define HIB_IM_RTCALT0 0x00000001 ///< RTC Alert 0 Interrupt Mask
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_RIS register.
+ */
+/*\{*/
+#define HIB_RIS_EXTW 0x00000008 ///< External Wake-Up Raw Interrupt
+ ///< Status
+#define HIB_RIS_LOWBAT 0x00000004 ///< Low Battery Voltage Raw
+ ///< Interrupt Status
+#define HIB_RIS_RTCALT1 0x00000002 ///< RTC Alert 1 Raw Interrupt Status
+#define HIB_RIS_RTCALT0 0x00000001 ///< RTC Alert 0 Raw Interrupt Status
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_MIS register.
+ */
+/*\{*/
+#define HIB_MIS_EXTW 0x00000008 ///< External Wake-Up Masked
+ ///< Interrupt Status
+#define HIB_MIS_LOWBAT 0x00000004 ///< Low Battery Voltage Masked
+ ///< Interrupt Status
+#define HIB_MIS_RTCALT1 0x00000002 ///< RTC Alert 1 Masked Interrupt
+ ///< Status
+#define HIB_MIS_RTCALT0 0x00000001 ///< RTC Alert 0 Masked Interrupt
+ ///< Status
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_IC register.
+ */
+/*\{*/
+#define HIB_IC_EXTW 0x00000008 ///< External Wake-Up Masked
+ ///< Interrupt Clear
+#define HIB_IC_LOWBAT 0x00000004 ///< Low Battery Voltage Masked
+ ///< Interrupt Clear
+#define HIB_IC_RTCALT1 0x00000002 ///< RTC Alert1 Masked Interrupt
+ ///< Clear
+#define HIB_IC_RTCALT0 0x00000001 ///< RTC Alert0 Masked Interrupt
+ ///< Clear
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_RTCT register.
+ */
+/*\{*/
+#define HIB_RTCT_TRIM_M 0x0000FFFF ///< RTC Trim Value
+#define HIB_RTCT_TRIM_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the HIB_DATA register.
+ */
+/*\{*/
+#define HIB_DATA_RTD_M 0xFFFFFFFF ///< Hibernation Module NV Data
+#define HIB_DATA_RTD_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the FLASH_FMA register.
+ */
+/*\{*/
+#define FLASH_FMA_OFFSET_M 0x0003FFFF ///< Address Offset
+#define FLASH_FMA_OFFSET_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the FLASH_FMD register.
+ */
+/*\{*/
+#define FLASH_FMD_DATA_M 0xFFFFFFFF ///< Data Value
+#define FLASH_FMD_DATA_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the FLASH_FMC register.
+ */
+/*\{*/
+#define FLASH_FMC_WRKEY 0xA4420000 ///< FLASH write key
+#define FLASH_FMC_COMT 0x00000008 ///< Commit Register Value
+#define FLASH_FMC_MERASE 0x00000004 ///< Mass Erase Flash Memory
+#define FLASH_FMC_ERASE 0x00000002 ///< Erase a Page of Flash Memory
+#define FLASH_FMC_WRITE 0x00000001 ///< Write a Word into Flash Memory
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the FLASH_FCRIS register.
+ */
+/*\{*/
+#define FLASH_FCRIS_PRIS 0x00000002 ///< Programming Raw Interrupt Status
+#define FLASH_FCRIS_ARIS 0x00000001 ///< Access Raw Interrupt Status
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the FLASH_FCIM register.
+ */
+/*\{*/
+#define FLASH_FCIM_PMASK 0x00000002 ///< Programming Interrupt Mask
+#define FLASH_FCIM_AMASK 0x00000001 ///< Access Interrupt Mask
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the FLASH_FCMISC register.
+ */
+/*\{*/
+#define FLASH_FCMISC_PMISC 0x00000002 ///< Programming Masked Interrupt
+ ///< Status and Clear
+#define FLASH_FCMISC_AMISC 0x00000001 ///< Access Masked Interrupt Status
+ ///< and Clear
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the FLASH_USECRL register.
+ */
+/*\{*/
+#define FLASH_USECRL_M 0x000000FF ///< Microsecond Reload Value
+#define FLASH_USECRL_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the FLASH_USERDBG register.
+ */
+/*\{*/
+#define FLASH_USERDBG_NW 0x80000000 ///< User Debug Not Written
+#define FLASH_USERDBG_DATA_M 0x7FFFFFFC ///< User Data
+#define FLASH_USERDBG_DBG1 0x00000002 ///< Debug Control 1
+#define FLASH_USERDBG_DBG0 0x00000001 ///< Debug Control 0
+#define FLASH_USERDBG_DATA_S 2
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the FLASH_USERREG0 register.
+ */
+/*\{*/
+#define FLASH_USERREG0_NW 0x80000000 ///< Not Written
+#define FLASH_USERREG0_DATA_M 0x7FFFFFFF ///< User Data
+#define FLASH_USERREG0_DATA_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the FLASH_USERREG1 register.
+ */
+/*\{*/
+#define FLASH_USERREG1_NW 0x80000000 ///< Not Written
+#define FLASH_USERREG1_DATA_M 0x7FFFFFFF ///< User Data
+#define FLASH_USERREG1_DATA_S 0
+/*\}*/
+
+/**
+ * The following are defines for the erase size of the FLASH block that is
+* erased by an erase operation, and the protect size is the size of the FLASH
+* block that is protected by each protection register.
+ */
+/*\{*/
+#define FLASH_PROTECT_SIZE 0x00000800
+#define FLASH_ERASE_SIZE 0x00000400
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DID0 register.
+ */
+/*\{*/
+#define SYSCTL_DID0_VER_M 0x70000000 ///< DID0 Version
+#define SYSCTL_DID0_VER_1 0x10000000 ///< Second version of the DID0
+ ///< register format
+#define SYSCTL_DID0_CLASS_M 0x00FF0000 ///< Device Class
+#define SYSCTL_DID0_CLASS_FURY 0x00010000 ///< Stellaris(R) Fury-class devices
+#define SYSCTL_DID0_MAJ_M 0x0000FF00 ///< Major Revision
+#define SYSCTL_DID0_MAJ_REVA 0x00000000 ///< Revision A (initial device)
+#define SYSCTL_DID0_MAJ_REVB 0x00000100 ///< Revision B (first base layer
+ ///< revision)
+#define SYSCTL_DID0_MAJ_REVC 0x00000200 ///< Revision C (second base layer
+ ///< revision)
+#define SYSCTL_DID0_MIN_M 0x000000FF ///< Minor Revision
+#define SYSCTL_DID0_MIN_0 0x00000000 ///< Initial device, or a major
+ ///< revision update
+#define SYSCTL_DID0_MIN_1 0x00000001 ///< First metal layer change
+#define SYSCTL_DID0_MIN_2 0x00000002 ///< Second metal layer change
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DID1 register.
+ */
+/*\{*/
+#define SYSCTL_DID1_VER_M 0xF0000000 ///< DID1 Version
+#define SYSCTL_DID1_VER_1 0x10000000 ///< Second version of the DID1
+ ///< register format
+#define SYSCTL_DID1_FAM_M 0x0F000000 ///< Family
+#define SYSCTL_DID1_FAM_STELLARIS \
+ 0x00000000 ///< Stellaris family of
+ ///< microcontollers, that is, all
+ ///< devices with external part
+ ///< numbers starting with LM3S
+#define SYSCTL_DID1_PRTNO_M 0x00FF0000 ///< Part Number
+#define SYSCTL_DID1_PRTNO_1968 0x00B80000 ///< LM3S1968
+#define SYSCTL_DID1_PINCNT_M 0x0000E000 ///< Package Pin Count
+#define SYSCTL_DID1_PINCNT_100 0x00004000 ///< 100-pin package
+#define SYSCTL_DID1_TEMP_M 0x000000E0 ///< Temperature Range
+#define SYSCTL_DID1_TEMP_C 0x00000000 ///< Commercial temperature range (0C
+ ///< to 70C)
+#define SYSCTL_DID1_TEMP_I 0x00000020 ///< Industrial temperature range
+ ///< (-40C to 85C)
+#define SYSCTL_DID1_TEMP_E 0x00000040 ///< Extended temperature range (-40C
+ ///< to 105C)
+#define SYSCTL_DID1_PKG_M 0x00000018 ///< Package Type
+#define SYSCTL_DID1_PKG_SOIC 0x00000000 ///< SOIC package
+#define SYSCTL_DID1_PKG_QFP 0x00000008 ///< LQFP package
+#define SYSCTL_DID1_PKG_BGA 0x00000010 ///< BGA package
+#define SYSCTL_DID1_ROHS 0x00000004 ///< RoHS-Compliance
+#define SYSCTL_DID1_QUAL_M 0x00000003 ///< Qualification Status
+#define SYSCTL_DID1_QUAL_ES 0x00000000 ///< Engineering Sample (unqualified)
+#define SYSCTL_DID1_QUAL_PP 0x00000001 ///< Pilot Production (unqualified)
+#define SYSCTL_DID1_QUAL_FQ 0x00000002 ///< Fully Qualified
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DC0 register.
+ */
+/*\{*/
+#define SYSCTL_DC0_SRAMSZ_M 0xFFFF0000 ///< SRAM Size
+#define SYSCTL_DC0_SRAMSZ_64KB 0x00FF0000 ///< 64 KB of SRAM
+#define SYSCTL_DC0_FLASHSZ_M 0x0000FFFF ///< Flash Size
+#define SYSCTL_DC0_FLASHSZ_256K 0x0000007F ///< 256 KB of Flash
+#define SYSCTL_DC0_SRAMSZ_S 16 ///< SRAM size shift
+#define SYSCTL_DC0_FLASHSZ_S 0 ///< Flash size shift
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DC1 register.
+ */
+/*\{*/
+#define SYSCTL_DC1_PWM 0x00100000 ///< PWM Module Present
+#define SYSCTL_DC1_ADC 0x00010000 ///< ADC Module Present
+#define SYSCTL_DC1_MINSYSDIV_M 0x0000F000 ///< System Clock Divider
+#define SYSCTL_DC1_MINSYSDIV_50 0x00003000 ///< Specifies a 50-MHz CPU clock
+ ///< with a PLL divider of 4
+#define SYSCTL_DC1_ADCSPD_M 0x00000300 ///< Max ADC Speed
+#define SYSCTL_DC1_ADCSPD_1M 0x00000300 ///< 1M samples/second
+#define SYSCTL_DC1_MPU 0x00000080 ///< MPU Present
+#define SYSCTL_DC1_HIB 0x00000040 ///< Hibernation Module Present
+#define SYSCTL_DC1_TEMP 0x00000020 ///< Temp Sensor Present
+#define SYSCTL_DC1_PLL 0x00000010 ///< PLL Present
+#define SYSCTL_DC1_WDT 0x00000008 ///< Watchdog Timer Present
+#define SYSCTL_DC1_SWO 0x00000004 ///< SWO Trace Port Present
+#define SYSCTL_DC1_SWD 0x00000002 ///< SWD Present
+#define SYSCTL_DC1_JTAG 0x00000001 ///< JTAG Present
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DC2 register.
+ */
+/*\{*/
+#define SYSCTL_DC2_COMP2 0x04000000 ///< Analog Comparator 2 Present
+#define SYSCTL_DC2_COMP1 0x02000000 ///< Analog Comparator 1 Present
+#define SYSCTL_DC2_COMP0 0x01000000 ///< Analog Comparator 0 Present
+#define SYSCTL_DC2_TIMER3 0x00080000 ///< Timer Module 3 Present
+#define SYSCTL_DC2_TIMER2 0x00040000 ///< Timer Module 2 Present
+#define SYSCTL_DC2_TIMER1 0x00020000 ///< Timer Module 1 Present
+#define SYSCTL_DC2_TIMER0 0x00010000 ///< Timer Module 0 Present
+#define SYSCTL_DC2_I2C1 0x00004000 ///< I2C Module 1 Present
+#define SYSCTL_DC2_I2C0 0x00001000 ///< I2C Module 0 Present
+#define SYSCTL_DC2_QEI1 0x00000200 ///< QEI Module 1 Present
+#define SYSCTL_DC2_QEI0 0x00000100 ///< QEI Module 0 Present
+#define SYSCTL_DC2_SSI1 0x00000020 ///< SSI Module 1 Present
+#define SYSCTL_DC2_SSI0 0x00000010 ///< SSI Module 0 Present
+#define SYSCTL_DC2_UART2 0x00000004 ///< UART Module 2 Present
+#define SYSCTL_DC2_UART1 0x00000002 ///< UART Module 1 Present
+#define SYSCTL_DC2_UART0 0x00000001 ///< UART Module 0 Present
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DC3 register.
+ */
+/*\{*/
+#define SYSCTL_DC3_32KHZ 0x80000000 ///< 32KHz Input Clock Available
+#define SYSCTL_DC3_CCP3 0x08000000 ///< CCP3 Pin Present
+#define SYSCTL_DC3_CCP2 0x04000000 ///< CCP2 Pin Present
+#define SYSCTL_DC3_CCP1 0x02000000 ///< CCP1 Pin Present
+#define SYSCTL_DC3_CCP0 0x01000000 ///< CCP0 Pin Present
+#define SYSCTL_DC3_ADC7 0x00800000 ///< ADC7 Pin Present
+#define SYSCTL_DC3_ADC6 0x00400000 ///< ADC6 Pin Present
+#define SYSCTL_DC3_ADC5 0x00200000 ///< ADC5 Pin Present
+#define SYSCTL_DC3_ADC4 0x00100000 ///< ADC4 Pin Present
+#define SYSCTL_DC3_ADC3 0x00080000 ///< ADC3 Pin Present
+#define SYSCTL_DC3_ADC2 0x00040000 ///< ADC2 Pin Present
+#define SYSCTL_DC3_ADC1 0x00020000 ///< ADC1 Pin Present
+#define SYSCTL_DC3_ADC0 0x00010000 ///< ADC0 Pin Present
+#define SYSCTL_DC3_PWMFAULT 0x00008000 ///< PWM Fault Pin Present
+#define SYSCTL_DC3_C2PLUS 0x00002000 ///< C2+ Pin Present
+#define SYSCTL_DC3_C2MINUS 0x00001000 ///< C2- Pin Present
+#define SYSCTL_DC3_C1PLUS 0x00000400 ///< C1+ Pin Present
+#define SYSCTL_DC3_C1MINUS 0x00000200 ///< C1- Pin Present
+#define SYSCTL_DC3_C0O 0x00000100 ///< C0o Pin Present
+#define SYSCTL_DC3_C0PLUS 0x00000080 ///< C0+ Pin Present
+#define SYSCTL_DC3_C0MINUS 0x00000040 ///< C0- Pin Present
+#define SYSCTL_DC3_PWM5 0x00000020 ///< PWM5 Pin Present
+#define SYSCTL_DC3_PWM4 0x00000010 ///< PWM4 Pin Present
+#define SYSCTL_DC3_PWM3 0x00000008 ///< PWM3 Pin Present
+#define SYSCTL_DC3_PWM2 0x00000004 ///< PWM2 Pin Present
+#define SYSCTL_DC3_PWM1 0x00000002 ///< PWM1 Pin Present
+#define SYSCTL_DC3_PWM0 0x00000001 ///< PWM0 Pin Present
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DC4 register.
+ */
+/*\{*/
+#define SYSCTL_DC4_GPIOH 0x00000080 ///< GPIO Port H Present
+#define SYSCTL_DC4_GPIOG 0x00000040 ///< GPIO Port G Present
+#define SYSCTL_DC4_GPIOF 0x00000020 ///< GPIO Port F Present
+#define SYSCTL_DC4_GPIOE 0x00000010 ///< GPIO Port E Present
+#define SYSCTL_DC4_GPIOD 0x00000008 ///< GPIO Port D Present
+#define SYSCTL_DC4_GPIOC 0x00000004 ///< GPIO Port C Present
+#define SYSCTL_DC4_GPIOB 0x00000002 ///< GPIO Port B Present
+#define SYSCTL_DC4_GPIOA 0x00000001 ///< GPIO Port A Present
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_PBORCTL register.
+ */
+/*\{*/
+#define SYSCTL_PBORCTL_BORIOR 0x00000002 ///< BOR Interrupt or Reset
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_LDOPCTL register.
+ */
+/*\{*/
+#define SYSCTL_LDOPCTL_M 0x0000003F ///< LDO Output Voltage
+#define SYSCTL_LDOPCTL_2_50V 0x00000000 ///< 2.50
+#define SYSCTL_LDOPCTL_2_45V 0x00000001 ///< 2.45
+#define SYSCTL_LDOPCTL_2_40V 0x00000002 ///< 2.40
+#define SYSCTL_LDOPCTL_2_35V 0x00000003 ///< 2.35
+#define SYSCTL_LDOPCTL_2_30V 0x00000004 ///< 2.30
+#define SYSCTL_LDOPCTL_2_25V 0x00000005 ///< 2.25
+#define SYSCTL_LDOPCTL_2_75V 0x0000001B ///< 2.75
+#define SYSCTL_LDOPCTL_2_70V 0x0000001C ///< 2.70
+#define SYSCTL_LDOPCTL_2_65V 0x0000001D ///< 2.65
+#define SYSCTL_LDOPCTL_2_60V 0x0000001E ///< 2.60
+#define SYSCTL_LDOPCTL_2_55V 0x0000001F ///< 2.55
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_SRCR0 register.
+ */
+/*\{*/
+#define SYSCTL_SRCR0_PWM 0x00100000 ///< PWM Reset Control
+#define SYSCTL_SRCR0_ADC 0x00010000 ///< ADC0 Reset Control
+#define SYSCTL_SRCR0_HIB 0x00000040 ///< HIB Reset Control
+#define SYSCTL_SRCR0_WDT 0x00000008 ///< WDT Reset Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_SRCR1 register.
+ */
+/*\{*/
+#define SYSCTL_SRCR1_COMP2 0x04000000 ///< Analog Comp 2 Reset Control
+#define SYSCTL_SRCR1_COMP1 0x02000000 ///< Analog Comp 1 Reset Control
+#define SYSCTL_SRCR1_COMP0 0x01000000 ///< Analog Comp 0 Reset Control
+#define SYSCTL_SRCR1_TIMER3 0x00080000 ///< Timer 3 Reset Control
+#define SYSCTL_SRCR1_TIMER2 0x00040000 ///< Timer 2 Reset Control
+#define SYSCTL_SRCR1_TIMER1 0x00020000 ///< Timer 1 Reset Control
+#define SYSCTL_SRCR1_TIMER0 0x00010000 ///< Timer 0 Reset Control
+#define SYSCTL_SRCR1_I2C1 0x00004000 ///< I2C1 Reset Control
+#define SYSCTL_SRCR1_I2C0 0x00001000 ///< I2C0 Reset Control
+#define SYSCTL_SRCR1_QEI1 0x00000200 ///< QEI1 Reset Control
+#define SYSCTL_SRCR1_QEI0 0x00000100 ///< QEI0 Reset Control
+#define SYSCTL_SRCR1_SSI1 0x00000020 ///< SSI1 Reset Control
+#define SYSCTL_SRCR1_SSI0 0x00000010 ///< SSI0 Reset Control
+#define SYSCTL_SRCR1_UART2 0x00000004 ///< UART2 Reset Control
+#define SYSCTL_SRCR1_UART1 0x00000002 ///< UART1 Reset Control
+#define SYSCTL_SRCR1_UART0 0x00000001 ///< UART0 Reset Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_SRCR2 register.
+ */
+/*\{*/
+#define SYSCTL_SRCR2_GPIOH 0x00000080 ///< Port H Reset Control
+#define SYSCTL_SRCR2_GPIOG 0x00000040 ///< Port G Reset Control
+#define SYSCTL_SRCR2_GPIOF 0x00000020 ///< Port F Reset Control
+#define SYSCTL_SRCR2_GPIOE 0x00000010 ///< Port E Reset Control
+#define SYSCTL_SRCR2_GPIOD 0x00000008 ///< Port D Reset Control
+#define SYSCTL_SRCR2_GPIOC 0x00000004 ///< Port C Reset Control
+#define SYSCTL_SRCR2_GPIOB 0x00000002 ///< Port B Reset Control
+#define SYSCTL_SRCR2_GPIOA 0x00000001 ///< Port A Reset Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_RIS register.
+ */
+/*\{*/
+#define SYSCTL_RIS_PLLLRIS 0x00000040 ///< PLL Lock Raw Interrupt Status
+#define SYSCTL_RIS_BORRIS 0x00000002 ///< Brown-Out Reset Raw Interrupt
+ ///< Status
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_IMC register.
+ */
+/*\{*/
+#define SYSCTL_IMC_PLLLIM 0x00000040 ///< PLL Lock Interrupt Mask
+#define SYSCTL_IMC_BORIM 0x00000002 ///< Brown-Out Reset Interrupt Mask
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_MISC register.
+ */
+/*\{*/
+#define SYSCTL_MISC_PLLLMIS 0x00000040 ///< PLL Lock Masked Interrupt Status
+#define SYSCTL_MISC_BORMIS 0x00000002 ///< BOR Masked Interrupt Status
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_RESC register.
+ */
+/*\{*/
+#define SYSCTL_RESC_SW 0x00000010 ///< Software Reset
+#define SYSCTL_RESC_WDT 0x00000008 ///< Watchdog Timer Reset
+#define SYSCTL_RESC_BOR 0x00000004 ///< Brown-Out Reset
+#define SYSCTL_RESC_POR 0x00000002 ///< Power-On Reset
+#define SYSCTL_RESC_EXT 0x00000001 ///< External Reset
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_RCC register.
+ */
+/*\{*/
+#define SYSCTL_RCC_ACG 0x08000000 ///< Auto Clock Gating
+#define SYSCTL_RCC_SYSDIV_M 0x07800000 ///< System Clock Divisor
+#define SYSCTL_RCC_SYSDIV_2 0x00800000 ///< System clock /2
+#define SYSCTL_RCC_SYSDIV_3 0x01000000 ///< System clock /3
+#define SYSCTL_RCC_SYSDIV_4 0x01800000 ///< System clock /4
+#define SYSCTL_RCC_SYSDIV_5 0x02000000 ///< System clock /5
+#define SYSCTL_RCC_SYSDIV_6 0x02800000 ///< System clock /6
+#define SYSCTL_RCC_SYSDIV_7 0x03000000 ///< System clock /7
+#define SYSCTL_RCC_SYSDIV_8 0x03800000 ///< System clock /8
+#define SYSCTL_RCC_SYSDIV_9 0x04000000 ///< System clock /9
+#define SYSCTL_RCC_SYSDIV_10 0x04800000 ///< System clock /10
+#define SYSCTL_RCC_SYSDIV_11 0x05000000 ///< System clock /11
+#define SYSCTL_RCC_SYSDIV_12 0x05800000 ///< System clock /12
+#define SYSCTL_RCC_SYSDIV_13 0x06000000 ///< System clock /13
+#define SYSCTL_RCC_SYSDIV_14 0x06800000 ///< System clock /14
+#define SYSCTL_RCC_SYSDIV_15 0x07000000 ///< System clock /15
+#define SYSCTL_RCC_SYSDIV_16 0x07800000 ///< System clock /16
+#define SYSCTL_RCC_USESYSDIV 0x00400000 ///< Enable System Clock Divider
+#define SYSCTL_RCC_USEPWMDIV 0x00100000 ///< Enable PWM Clock Divisor
+#define SYSCTL_RCC_PWMDIV_M 0x000E0000 ///< PWM Unit Clock Divisor
+#define SYSCTL_RCC_PWMDIV_2 0x00000000 ///< PWM clock /2
+#define SYSCTL_RCC_PWMDIV_4 0x00020000 ///< PWM clock /4
+#define SYSCTL_RCC_PWMDIV_8 0x00040000 ///< PWM clock /8
+#define SYSCTL_RCC_PWMDIV_16 0x00060000 ///< PWM clock /16
+#define SYSCTL_RCC_PWMDIV_32 0x00080000 ///< PWM clock /32
+#define SYSCTL_RCC_PWMDIV_64 0x000A0000 ///< PWM clock /64
+#define SYSCTL_RCC_PWRDN 0x00002000 ///< PLL Power Down
+#define SYSCTL_RCC_BYPASS 0x00000800 ///< PLL Bypass
+#define SYSCTL_RCC_XTAL_M 0x000003C0 ///< Crystal Value
+#define SYSCTL_RCC_XTAL_1MHZ 0x00000000 ///< 1 MHz
+#define SYSCTL_RCC_XTAL_1_84MHZ 0x00000040 ///< 1.8432 MHz
+#define SYSCTL_RCC_XTAL_2MHZ 0x00000080 ///< 2 MHz
+#define SYSCTL_RCC_XTAL_2_45MHZ 0x000000C0 ///< 2.4576 MHz
+#define SYSCTL_RCC_XTAL_3_57MHZ 0x00000100 ///< 3.579545 MHz
+#define SYSCTL_RCC_XTAL_3_68MHZ 0x00000140 ///< 3.6864 MHz
+#define SYSCTL_RCC_XTAL_4MHZ 0x00000180 ///< 4 MHz
+#define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0 ///< 4.096 MHz
+#define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200 ///< 4.9152 MHz
+#define SYSCTL_RCC_XTAL_5MHZ 0x00000240 ///< 5 MHz
+#define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280 ///< 5.12 MHz
+#define SYSCTL_RCC_XTAL_6MHZ 0x000002C0 ///< 6 MHz
+#define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300 ///< 6.144 MHz
+#define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340 ///< 7.3728 MHz
+#define SYSCTL_RCC_XTAL_8MHZ 0x00000380 ///< 8 MHz
+#define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0 ///< 8.192 MHz
+#define SYSCTL_RCC_OSCSRC_M 0x00000030 ///< Oscillator Source
+#define SYSCTL_RCC_OSCSRC_MAIN 0x00000000 ///< MOSC
+#define SYSCTL_RCC_OSCSRC_INT 0x00000010 ///< IOSC
+#define SYSCTL_RCC_OSCSRC_INT4 0x00000020 ///< IOSC/4
+#define SYSCTL_RCC_OSCSRC_30 0x00000030 ///< 30 kHz
+#define SYSCTL_RCC_IOSCDIS 0x00000002 ///< Internal Oscillator Disable
+#define SYSCTL_RCC_MOSCDIS 0x00000001 ///< Main Oscillator Disable
+#define SYSCTL_RCC_SYSDIV_S 23
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_PLLCFG register.
+ */
+/*\{*/
+#define SYSCTL_PLLCFG_F_M 0x00003FE0 ///< PLL F Value
+#define SYSCTL_PLLCFG_R_M 0x0000001F ///< PLL R Value
+#define SYSCTL_PLLCFG_F_S 5
+#define SYSCTL_PLLCFG_R_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_RCC2 register.
+ */
+/*\{*/
+#define SYSCTL_RCC2_USERCC2 0x80000000 ///< Use RCC2
+#define SYSCTL_RCC2_SYSDIV2_M 0x1F800000 ///< System Clock Divisor 2
+#define SYSCTL_RCC2_SYSDIV2_2 0x00800000 ///< System clock /2
+#define SYSCTL_RCC2_SYSDIV2_3 0x01000000 ///< System clock /3
+#define SYSCTL_RCC2_SYSDIV2_4 0x01800000 ///< System clock /4
+#define SYSCTL_RCC2_SYSDIV2_5 0x02000000 ///< System clock /5
+#define SYSCTL_RCC2_SYSDIV2_6 0x02800000 ///< System clock /6
+#define SYSCTL_RCC2_SYSDIV2_7 0x03000000 ///< System clock /7
+#define SYSCTL_RCC2_SYSDIV2_8 0x03800000 ///< System clock /8
+#define SYSCTL_RCC2_SYSDIV2_9 0x04000000 ///< System clock /9
+#define SYSCTL_RCC2_SYSDIV2_10 0x04800000 ///< System clock /10
+#define SYSCTL_RCC2_SYSDIV2_11 0x05000000 ///< System clock /11
+#define SYSCTL_RCC2_SYSDIV2_12 0x05800000 ///< System clock /12
+#define SYSCTL_RCC2_SYSDIV2_13 0x06000000 ///< System clock /13
+#define SYSCTL_RCC2_SYSDIV2_14 0x06800000 ///< System clock /14
+#define SYSCTL_RCC2_SYSDIV2_15 0x07000000 ///< System clock /15
+#define SYSCTL_RCC2_SYSDIV2_16 0x07800000 ///< System clock /16
+#define SYSCTL_RCC2_SYSDIV2_17 0x08000000 ///< System clock /17
+#define SYSCTL_RCC2_SYSDIV2_18 0x08800000 ///< System clock /18
+#define SYSCTL_RCC2_SYSDIV2_19 0x09000000 ///< System clock /19
+#define SYSCTL_RCC2_SYSDIV2_20 0x09800000 ///< System clock /20
+#define SYSCTL_RCC2_SYSDIV2_21 0x0A000000 ///< System clock /21
+#define SYSCTL_RCC2_SYSDIV2_22 0x0A800000 ///< System clock /22
+#define SYSCTL_RCC2_SYSDIV2_23 0x0B000000 ///< System clock /23
+#define SYSCTL_RCC2_SYSDIV2_24 0x0B800000 ///< System clock /24
+#define SYSCTL_RCC2_SYSDIV2_25 0x0C000000 ///< System clock /25
+#define SYSCTL_RCC2_SYSDIV2_26 0x0C800000 ///< System clock /26
+#define SYSCTL_RCC2_SYSDIV2_27 0x0D000000 ///< System clock /27
+#define SYSCTL_RCC2_SYSDIV2_28 0x0D800000 ///< System clock /28
+#define SYSCTL_RCC2_SYSDIV2_29 0x0E000000 ///< System clock /29
+#define SYSCTL_RCC2_SYSDIV2_30 0x0E800000 ///< System clock /30
+#define SYSCTL_RCC2_SYSDIV2_31 0x0F000000 ///< System clock /31
+#define SYSCTL_RCC2_SYSDIV2_32 0x0F800000 ///< System clock /32
+#define SYSCTL_RCC2_SYSDIV2_33 0x10000000 ///< System clock /33
+#define SYSCTL_RCC2_SYSDIV2_34 0x10800000 ///< System clock /34
+#define SYSCTL_RCC2_SYSDIV2_35 0x11000000 ///< System clock /35
+#define SYSCTL_RCC2_SYSDIV2_36 0x11800000 ///< System clock /36
+#define SYSCTL_RCC2_SYSDIV2_37 0x12000000 ///< System clock /37
+#define SYSCTL_RCC2_SYSDIV2_38 0x12800000 ///< System clock /38
+#define SYSCTL_RCC2_SYSDIV2_39 0x13000000 ///< System clock /39
+#define SYSCTL_RCC2_SYSDIV2_40 0x13800000 ///< System clock /40
+#define SYSCTL_RCC2_SYSDIV2_41 0x14000000 ///< System clock /41
+#define SYSCTL_RCC2_SYSDIV2_42 0x14800000 ///< System clock /42
+#define SYSCTL_RCC2_SYSDIV2_43 0x15000000 ///< System clock /43
+#define SYSCTL_RCC2_SYSDIV2_44 0x15800000 ///< System clock /44
+#define SYSCTL_RCC2_SYSDIV2_45 0x16000000 ///< System clock /45
+#define SYSCTL_RCC2_SYSDIV2_46 0x16800000 ///< System clock /46
+#define SYSCTL_RCC2_SYSDIV2_47 0x17000000 ///< System clock /47
+#define SYSCTL_RCC2_SYSDIV2_48 0x17800000 ///< System clock /48
+#define SYSCTL_RCC2_SYSDIV2_49 0x18000000 ///< System clock /49
+#define SYSCTL_RCC2_SYSDIV2_50 0x18800000 ///< System clock /50
+#define SYSCTL_RCC2_SYSDIV2_51 0x19000000 ///< System clock /51
+#define SYSCTL_RCC2_SYSDIV2_52 0x19800000 ///< System clock /52
+#define SYSCTL_RCC2_SYSDIV2_53 0x1A000000 ///< System clock /53
+#define SYSCTL_RCC2_SYSDIV2_54 0x1A800000 ///< System clock /54
+#define SYSCTL_RCC2_SYSDIV2_55 0x1B000000 ///< System clock /55
+#define SYSCTL_RCC2_SYSDIV2_56 0x1B800000 ///< System clock /56
+#define SYSCTL_RCC2_SYSDIV2_57 0x1C000000 ///< System clock /57
+#define SYSCTL_RCC2_SYSDIV2_58 0x1C800000 ///< System clock /58
+#define SYSCTL_RCC2_SYSDIV2_59 0x1D000000 ///< System clock /59
+#define SYSCTL_RCC2_SYSDIV2_60 0x1D800000 ///< System clock /60
+#define SYSCTL_RCC2_SYSDIV2_61 0x1E000000 ///< System clock /61
+#define SYSCTL_RCC2_SYSDIV2_62 0x1E800000 ///< System clock /62
+#define SYSCTL_RCC2_SYSDIV2_63 0x1F000000 ///< System clock /63
+#define SYSCTL_RCC2_SYSDIV2_64 0x1F800000 ///< System clock /64
+#define SYSCTL_RCC2_PWRDN2 0x00002000 ///< Power-Down PLL 2
+#define SYSCTL_RCC2_BYPASS2 0x00000800 ///< PLL Bypass 2
+#define SYSCTL_RCC2_OSCSRC2_M 0x00000070 ///< Oscillator Source 2
+#define SYSCTL_RCC2_OSCSRC2_MO 0x00000000 ///< MOSC
+#define SYSCTL_RCC2_OSCSRC2_IO 0x00000010 ///< PIOSC
+#define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020 ///< PIOSC/4
+#define SYSCTL_RCC2_OSCSRC2_30 0x00000030 ///< 30 kHz
+#define SYSCTL_RCC2_OSCSRC2_32 0x00000070 ///< 32.768 kHz
+#define SYSCTL_RCC2_SYSDIV2_S 23
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_RCGC0 register.
+ */
+/*\{*/
+#define SYSCTL_RCGC0_PWM 0x00100000 ///< PWM Clock Gating Control
+#define SYSCTL_RCGC0_ADC 0x00010000 ///< ADC0 Clock Gating Control
+#define SYSCTL_RCGC0_ADCSPD_M 0x00000300 ///< ADC Sample Speed
+#define SYSCTL_RCGC0_ADCSPD125K 0x00000000 ///< 125K samples/second
+#define SYSCTL_RCGC0_ADCSPD250K 0x00000100 ///< 250K samples/second
+#define SYSCTL_RCGC0_ADCSPD500K 0x00000200 ///< 500K samples/second
+#define SYSCTL_RCGC0_ADCSPD1M 0x00000300 ///< 1M samples/second
+#define SYSCTL_RCGC0_HIB 0x00000040 ///< HIB Clock Gating Control
+#define SYSCTL_RCGC0_WDT 0x00000008 ///< WDT Clock Gating Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_RCGC1 register.
+ */
+/*\{*/
+#define SYSCTL_RCGC1_COMP2 0x04000000 ///< Analog Comparator 2 Clock Gating
+#define SYSCTL_RCGC1_COMP1 0x02000000 ///< Analog Comparator 1 Clock Gating
+#define SYSCTL_RCGC1_COMP0 0x01000000 ///< Analog Comparator 0 Clock Gating
+#define SYSCTL_RCGC1_TIMER3 0x00080000 ///< Timer 3 Clock Gating Control
+#define SYSCTL_RCGC1_TIMER2 0x00040000 ///< Timer 2 Clock Gating Control
+#define SYSCTL_RCGC1_TIMER1 0x00020000 ///< Timer 1 Clock Gating Control
+#define SYSCTL_RCGC1_TIMER0 0x00010000 ///< Timer 0 Clock Gating Control
+#define SYSCTL_RCGC1_I2C1 0x00004000 ///< I2C1 Clock Gating Control
+#define SYSCTL_RCGC1_I2C0 0x00001000 ///< I2C0 Clock Gating Control
+#define SYSCTL_RCGC1_QEI1 0x00000200 ///< QEI1 Clock Gating Control
+#define SYSCTL_RCGC1_QEI0 0x00000100 ///< QEI0 Clock Gating Control
+#define SYSCTL_RCGC1_SSI1 0x00000020 ///< SSI1 Clock Gating Control
+#define SYSCTL_RCGC1_SSI0 0x00000010 ///< SSI0 Clock Gating Control
+#define SYSCTL_RCGC1_UART2 0x00000004 ///< UART2 Clock Gating Control
+#define SYSCTL_RCGC1_UART1 0x00000002 ///< UART1 Clock Gating Control
+#define SYSCTL_RCGC1_UART0 0x00000001 ///< UART0 Clock Gating Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_RCGC2 register.
+ */
+/*\{*/
+#define SYSCTL_RCGC2_GPIOH 0x00000080 ///< Port H Clock Gating Control
+#define SYSCTL_RCGC2_GPIOG 0x00000040 ///< Port G Clock Gating Control
+#define SYSCTL_RCGC2_GPIOF 0x00000020 ///< Port F Clock Gating Control
+#define SYSCTL_RCGC2_GPIOE 0x00000010 ///< Port E Clock Gating Control
+#define SYSCTL_RCGC2_GPIOD 0x00000008 ///< Port D Clock Gating Control
+#define SYSCTL_RCGC2_GPIOC 0x00000004 ///< Port C Clock Gating Control
+#define SYSCTL_RCGC2_GPIOB 0x00000002 ///< Port B Clock Gating Control
+#define SYSCTL_RCGC2_GPIOA 0x00000001 ///< Port A Clock Gating Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_SCGC0 register.
+ */
+/*\{*/
+#define SYSCTL_SCGC0_PWM 0x00100000 ///< PWM Clock Gating Control
+#define SYSCTL_SCGC0_ADC 0x00010000 ///< ADC0 Clock Gating Control
+#define SYSCTL_SCGC0_ADCSPD_M 0x00000300 ///< ADC Sample Speed
+#define SYSCTL_SCGC0_ADCSPD125K 0x00000000 ///< 125K samples/second
+#define SYSCTL_SCGC0_ADCSPD250K 0x00000100 ///< 250K samples/second
+#define SYSCTL_SCGC0_ADCSPD500K 0x00000200 ///< 500K samples/second
+#define SYSCTL_SCGC0_ADCSPD1M 0x00000300 ///< 1M samples/second
+#define SYSCTL_SCGC0_HIB 0x00000040 ///< HIB Clock Gating Control
+#define SYSCTL_SCGC0_WDT 0x00000008 ///< WDT Clock Gating Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_SCGC1 register.
+ */
+/*\{*/
+#define SYSCTL_SCGC1_COMP2 0x04000000 ///< Analog Comparator 2 Clock Gating
+#define SYSCTL_SCGC1_COMP1 0x02000000 ///< Analog Comparator 1 Clock Gating
+#define SYSCTL_SCGC1_COMP0 0x01000000 ///< Analog Comparator 0 Clock Gating
+#define SYSCTL_SCGC1_TIMER3 0x00080000 ///< Timer 3 Clock Gating Control
+#define SYSCTL_SCGC1_TIMER2 0x00040000 ///< Timer 2 Clock Gating Control
+#define SYSCTL_SCGC1_TIMER1 0x00020000 ///< Timer 1 Clock Gating Control
+#define SYSCTL_SCGC1_TIMER0 0x00010000 ///< Timer 0 Clock Gating Control
+#define SYSCTL_SCGC1_I2C1 0x00004000 ///< I2C1 Clock Gating Control
+#define SYSCTL_SCGC1_I2C0 0x00001000 ///< I2C0 Clock Gating Control
+#define SYSCTL_SCGC1_QEI1 0x00000200 ///< QEI1 Clock Gating Control
+#define SYSCTL_SCGC1_QEI0 0x00000100 ///< QEI0 Clock Gating Control
+#define SYSCTL_SCGC1_SSI1 0x00000020 ///< SSI1 Clock Gating Control
+#define SYSCTL_SCGC1_SSI0 0x00000010 ///< SSI0 Clock Gating Control
+#define SYSCTL_SCGC1_UART2 0x00000004 ///< UART2 Clock Gating Control
+#define SYSCTL_SCGC1_UART1 0x00000002 ///< UART1 Clock Gating Control
+#define SYSCTL_SCGC1_UART0 0x00000001 ///< UART0 Clock Gating Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_SCGC2 register.
+ */
+/*\{*/
+#define SYSCTL_SCGC2_GPIOH 0x00000080 ///< Port H Clock Gating Control
+#define SYSCTL_SCGC2_GPIOG 0x00000040 ///< Port G Clock Gating Control
+#define SYSCTL_SCGC2_GPIOF 0x00000020 ///< Port F Clock Gating Control
+#define SYSCTL_SCGC2_GPIOE 0x00000010 ///< Port E Clock Gating Control
+#define SYSCTL_SCGC2_GPIOD 0x00000008 ///< Port D Clock Gating Control
+#define SYSCTL_SCGC2_GPIOC 0x00000004 ///< Port C Clock Gating Control
+#define SYSCTL_SCGC2_GPIOB 0x00000002 ///< Port B Clock Gating Control
+#define SYSCTL_SCGC2_GPIOA 0x00000001 ///< Port A Clock Gating Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DCGC0 register.
+ */
+/*\{*/
+#define SYSCTL_DCGC0_PWM 0x00100000 ///< PWM Clock Gating Control
+#define SYSCTL_DCGC0_ADC 0x00010000 ///< ADC0 Clock Gating Control
+#define SYSCTL_DCGC0_HIB 0x00000040 ///< HIB Clock Gating Control
+#define SYSCTL_DCGC0_WDT 0x00000008 ///< WDT Clock Gating Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DCGC1 register.
+ */
+/*\{*/
+#define SYSCTL_DCGC1_COMP2 0x04000000 ///< Analog Comparator 2 Clock Gating
+#define SYSCTL_DCGC1_COMP1 0x02000000 ///< Analog Comparator 1 Clock Gating
+#define SYSCTL_DCGC1_COMP0 0x01000000 ///< Analog Comparator 0 Clock Gating
+#define SYSCTL_DCGC1_TIMER3 0x00080000 ///< Timer 3 Clock Gating Control
+#define SYSCTL_DCGC1_TIMER2 0x00040000 ///< Timer 2 Clock Gating Control
+#define SYSCTL_DCGC1_TIMER1 0x00020000 ///< Timer 1 Clock Gating Control
+#define SYSCTL_DCGC1_TIMER0 0x00010000 ///< Timer 0 Clock Gating Control
+#define SYSCTL_DCGC1_I2C1 0x00004000 ///< I2C1 Clock Gating Control
+#define SYSCTL_DCGC1_I2C0 0x00001000 ///< I2C0 Clock Gating Control
+#define SYSCTL_DCGC1_QEI1 0x00000200 ///< QEI1 Clock Gating Control
+#define SYSCTL_DCGC1_QEI0 0x00000100 ///< QEI0 Clock Gating Control
+#define SYSCTL_DCGC1_SSI1 0x00000020 ///< SSI1 Clock Gating Control
+#define SYSCTL_DCGC1_SSI0 0x00000010 ///< SSI0 Clock Gating Control
+#define SYSCTL_DCGC1_UART2 0x00000004 ///< UART2 Clock Gating Control
+#define SYSCTL_DCGC1_UART1 0x00000002 ///< UART1 Clock Gating Control
+#define SYSCTL_DCGC1_UART0 0x00000001 ///< UART0 Clock Gating Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DCGC2 register.
+ */
+/*\{*/
+#define SYSCTL_DCGC2_GPIOH 0x00000080 ///< Port H Clock Gating Control
+#define SYSCTL_DCGC2_GPIOG 0x00000040 ///< Port G Clock Gating Control
+#define SYSCTL_DCGC2_GPIOF 0x00000020 ///< Port F Clock Gating Control
+#define SYSCTL_DCGC2_GPIOE 0x00000010 ///< Port E Clock Gating Control
+#define SYSCTL_DCGC2_GPIOD 0x00000008 ///< Port D Clock Gating Control
+#define SYSCTL_DCGC2_GPIOC 0x00000004 ///< Port C Clock Gating Control
+#define SYSCTL_DCGC2_GPIOB 0x00000002 ///< Port B Clock Gating Control
+#define SYSCTL_DCGC2_GPIOA 0x00000001 ///< Port A Clock Gating Control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG
+* register.
+ */
+/*\{*/
+#define SYSCTL_DSLPCLKCFG_D_M 0x1F800000 ///< Divider Field Override
+#define SYSCTL_DSLPCLKCFG_D_1 0x00000000 ///< System clock /1
+#define SYSCTL_DSLPCLKCFG_D_2 0x00800000 ///< System clock /2
+#define SYSCTL_DSLPCLKCFG_D_3 0x01000000 ///< System clock /3
+#define SYSCTL_DSLPCLKCFG_D_4 0x01800000 ///< System clock /4
+#define SYSCTL_DSLPCLKCFG_D_5 0x02000000 ///< System clock /5
+#define SYSCTL_DSLPCLKCFG_D_6 0x02800000 ///< System clock /6
+#define SYSCTL_DSLPCLKCFG_D_7 0x03000000 ///< System clock /7
+#define SYSCTL_DSLPCLKCFG_D_8 0x03800000 ///< System clock /8
+#define SYSCTL_DSLPCLKCFG_D_9 0x04000000 ///< System clock /9
+#define SYSCTL_DSLPCLKCFG_D_10 0x04800000 ///< System clock /10
+#define SYSCTL_DSLPCLKCFG_D_11 0x05000000 ///< System clock /11
+#define SYSCTL_DSLPCLKCFG_D_12 0x05800000 ///< System clock /12
+#define SYSCTL_DSLPCLKCFG_D_13 0x06000000 ///< System clock /13
+#define SYSCTL_DSLPCLKCFG_D_14 0x06800000 ///< System clock /14
+#define SYSCTL_DSLPCLKCFG_D_15 0x07000000 ///< System clock /15
+#define SYSCTL_DSLPCLKCFG_D_16 0x07800000 ///< System clock /16
+#define SYSCTL_DSLPCLKCFG_D_17 0x08000000 ///< System clock /17
+#define SYSCTL_DSLPCLKCFG_D_18 0x08800000 ///< System clock /18
+#define SYSCTL_DSLPCLKCFG_D_19 0x09000000 ///< System clock /19
+#define SYSCTL_DSLPCLKCFG_D_20 0x09800000 ///< System clock /20
+#define SYSCTL_DSLPCLKCFG_D_21 0x0A000000 ///< System clock /21
+#define SYSCTL_DSLPCLKCFG_D_22 0x0A800000 ///< System clock /22
+#define SYSCTL_DSLPCLKCFG_D_23 0x0B000000 ///< System clock /23
+#define SYSCTL_DSLPCLKCFG_D_24 0x0B800000 ///< System clock /24
+#define SYSCTL_DSLPCLKCFG_D_25 0x0C000000 ///< System clock /25
+#define SYSCTL_DSLPCLKCFG_D_26 0x0C800000 ///< System clock /26
+#define SYSCTL_DSLPCLKCFG_D_27 0x0D000000 ///< System clock /27
+#define SYSCTL_DSLPCLKCFG_D_28 0x0D800000 ///< System clock /28
+#define SYSCTL_DSLPCLKCFG_D_29 0x0E000000 ///< System clock /29
+#define SYSCTL_DSLPCLKCFG_D_30 0x0E800000 ///< System clock /30
+#define SYSCTL_DSLPCLKCFG_D_31 0x0F000000 ///< System clock /31
+#define SYSCTL_DSLPCLKCFG_D_32 0x0F800000 ///< System clock /32
+#define SYSCTL_DSLPCLKCFG_D_33 0x10000000 ///< System clock /33
+#define SYSCTL_DSLPCLKCFG_D_34 0x10800000 ///< System clock /34
+#define SYSCTL_DSLPCLKCFG_D_35 0x11000000 ///< System clock /35
+#define SYSCTL_DSLPCLKCFG_D_36 0x11800000 ///< System clock /36
+#define SYSCTL_DSLPCLKCFG_D_37 0x12000000 ///< System clock /37
+#define SYSCTL_DSLPCLKCFG_D_38 0x12800000 ///< System clock /38
+#define SYSCTL_DSLPCLKCFG_D_39 0x13000000 ///< System clock /39
+#define SYSCTL_DSLPCLKCFG_D_40 0x13800000 ///< System clock /40
+#define SYSCTL_DSLPCLKCFG_D_41 0x14000000 ///< System clock /41
+#define SYSCTL_DSLPCLKCFG_D_42 0x14800000 ///< System clock /42
+#define SYSCTL_DSLPCLKCFG_D_43 0x15000000 ///< System clock /43
+#define SYSCTL_DSLPCLKCFG_D_44 0x15800000 ///< System clock /44
+#define SYSCTL_DSLPCLKCFG_D_45 0x16000000 ///< System clock /45
+#define SYSCTL_DSLPCLKCFG_D_46 0x16800000 ///< System clock /46
+#define SYSCTL_DSLPCLKCFG_D_47 0x17000000 ///< System clock /47
+#define SYSCTL_DSLPCLKCFG_D_48 0x17800000 ///< System clock /48
+#define SYSCTL_DSLPCLKCFG_D_49 0x18000000 ///< System clock /49
+#define SYSCTL_DSLPCLKCFG_D_50 0x18800000 ///< System clock /50
+#define SYSCTL_DSLPCLKCFG_D_51 0x19000000 ///< System clock /51
+#define SYSCTL_DSLPCLKCFG_D_52 0x19800000 ///< System clock /52
+#define SYSCTL_DSLPCLKCFG_D_53 0x1A000000 ///< System clock /53
+#define SYSCTL_DSLPCLKCFG_D_54 0x1A800000 ///< System clock /54
+#define SYSCTL_DSLPCLKCFG_D_55 0x1B000000 ///< System clock /55
+#define SYSCTL_DSLPCLKCFG_D_56 0x1B800000 ///< System clock /56
+#define SYSCTL_DSLPCLKCFG_D_57 0x1C000000 ///< System clock /57
+#define SYSCTL_DSLPCLKCFG_D_58 0x1C800000 ///< System clock /58
+#define SYSCTL_DSLPCLKCFG_D_59 0x1D000000 ///< System clock /59
+#define SYSCTL_DSLPCLKCFG_D_60 0x1D800000 ///< System clock /60
+#define SYSCTL_DSLPCLKCFG_D_61 0x1E000000 ///< System clock /61
+#define SYSCTL_DSLPCLKCFG_D_62 0x1E800000 ///< System clock /62
+#define SYSCTL_DSLPCLKCFG_D_63 0x1F000000 ///< System clock /63
+#define SYSCTL_DSLPCLKCFG_D_64 0x1F800000 ///< System clock /64
+#define SYSCTL_DSLPCLKCFG_O_M 0x00000070 ///< Clock Source
+#define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000 ///< MOSC
+#define SYSCTL_DSLPCLKCFG_O_IO 0x00000010 ///< PIOSC
+#define SYSCTL_DSLPCLKCFG_O_30 0x00000030 ///< 30 kHz
+#define SYSCTL_DSLPCLKCFG_O_32 0x00000070 ///< 32.768 kHz
+#define SYSCTL_DSLPCLKCFG_D_S 23
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_INT_TYPE register.
+ */
+/*\{*/
+#define NVIC_INT_TYPE_LINES_M 0x0000001F ///< Number of interrupt lines (x32)
+#define NVIC_INT_TYPE_LINES_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_ST_CTRL register.
+ */
+/*\{*/
+#define NVIC_ST_CTRL_COUNT 0x00010000 ///< Count flag
+#define NVIC_ST_CTRL_CLK_SRC 0x00000004 ///< Clock Source
+#define NVIC_ST_CTRL_INTEN 0x00000002 ///< Interrupt enable
+#define NVIC_ST_CTRL_ENABLE 0x00000001 ///< Counter mode
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_ST_RELOAD register.
+ */
+/*\{*/
+#define NVIC_ST_RELOAD_M 0x00FFFFFF ///< Counter load value
+#define NVIC_ST_RELOAD_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_ST_CURRENT
+* register.
+ */
+/*\{*/
+#define NVIC_ST_CURRENT_M 0x00FFFFFF ///< Counter current value
+#define NVIC_ST_CURRENT_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_ST_CAL register.
+ */
+/*\{*/
+#define NVIC_ST_CAL_NOREF 0x80000000 ///< No reference clock
+#define NVIC_ST_CAL_SKEW 0x40000000 ///< Clock skew
+#define NVIC_ST_CAL_ONEMS_M 0x00FFFFFF ///< 1ms reference value
+#define NVIC_ST_CAL_ONEMS_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_EN0 register.
+ */
+/*\{*/
+#define NVIC_EN0_INT31 0x80000000 ///< Interrupt 31 enable
+#define NVIC_EN0_INT30 0x40000000 ///< Interrupt 30 enable
+#define NVIC_EN0_INT29 0x20000000 ///< Interrupt 29 enable
+#define NVIC_EN0_INT28 0x10000000 ///< Interrupt 28 enable
+#define NVIC_EN0_INT27 0x08000000 ///< Interrupt 27 enable
+#define NVIC_EN0_INT26 0x04000000 ///< Interrupt 26 enable
+#define NVIC_EN0_INT25 0x02000000 ///< Interrupt 25 enable
+#define NVIC_EN0_INT24 0x01000000 ///< Interrupt 24 enable
+#define NVIC_EN0_INT23 0x00800000 ///< Interrupt 23 enable
+#define NVIC_EN0_INT22 0x00400000 ///< Interrupt 22 enable
+#define NVIC_EN0_INT21 0x00200000 ///< Interrupt 21 enable
+#define NVIC_EN0_INT20 0x00100000 ///< Interrupt 20 enable
+#define NVIC_EN0_INT19 0x00080000 ///< Interrupt 19 enable
+#define NVIC_EN0_INT18 0x00040000 ///< Interrupt 18 enable
+#define NVIC_EN0_INT17 0x00020000 ///< Interrupt 17 enable
+#define NVIC_EN0_INT16 0x00010000 ///< Interrupt 16 enable
+#define NVIC_EN0_INT15 0x00008000 ///< Interrupt 15 enable
+#define NVIC_EN0_INT14 0x00004000 ///< Interrupt 14 enable
+#define NVIC_EN0_INT13 0x00002000 ///< Interrupt 13 enable
+#define NVIC_EN0_INT12 0x00001000 ///< Interrupt 12 enable
+#define NVIC_EN0_INT11 0x00000800 ///< Interrupt 11 enable
+#define NVIC_EN0_INT10 0x00000400 ///< Interrupt 10 enable
+#define NVIC_EN0_INT9 0x00000200 ///< Interrupt 9 enable
+#define NVIC_EN0_INT8 0x00000100 ///< Interrupt 8 enable
+#define NVIC_EN0_INT7 0x00000080 ///< Interrupt 7 enable
+#define NVIC_EN0_INT6 0x00000040 ///< Interrupt 6 enable
+#define NVIC_EN0_INT5 0x00000020 ///< Interrupt 5 enable
+#define NVIC_EN0_INT4 0x00000010 ///< Interrupt 4 enable
+#define NVIC_EN0_INT3 0x00000008 ///< Interrupt 3 enable
+#define NVIC_EN0_INT2 0x00000004 ///< Interrupt 2 enable
+#define NVIC_EN0_INT1 0x00000002 ///< Interrupt 1 enable
+#define NVIC_EN0_INT0 0x00000001 ///< Interrupt 0 enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_EN1 register.
+ */
+/*\{*/
+#define NVIC_EN1_INT59 0x08000000 ///< Interrupt 59 enable
+#define NVIC_EN1_INT58 0x04000000 ///< Interrupt 58 enable
+#define NVIC_EN1_INT57 0x02000000 ///< Interrupt 57 enable
+#define NVIC_EN1_INT56 0x01000000 ///< Interrupt 56 enable
+#define NVIC_EN1_INT55 0x00800000 ///< Interrupt 55 enable
+#define NVIC_EN1_INT54 0x00400000 ///< Interrupt 54 enable
+#define NVIC_EN1_INT53 0x00200000 ///< Interrupt 53 enable
+#define NVIC_EN1_INT52 0x00100000 ///< Interrupt 52 enable
+#define NVIC_EN1_INT51 0x00080000 ///< Interrupt 51 enable
+#define NVIC_EN1_INT50 0x00040000 ///< Interrupt 50 enable
+#define NVIC_EN1_INT49 0x00020000 ///< Interrupt 49 enable
+#define NVIC_EN1_INT48 0x00010000 ///< Interrupt 48 enable
+#define NVIC_EN1_INT47 0x00008000 ///< Interrupt 47 enable
+#define NVIC_EN1_INT46 0x00004000 ///< Interrupt 46 enable
+#define NVIC_EN1_INT45 0x00002000 ///< Interrupt 45 enable
+#define NVIC_EN1_INT44 0x00001000 ///< Interrupt 44 enable
+#define NVIC_EN1_INT43 0x00000800 ///< Interrupt 43 enable
+#define NVIC_EN1_INT42 0x00000400 ///< Interrupt 42 enable
+#define NVIC_EN1_INT41 0x00000200 ///< Interrupt 41 enable
+#define NVIC_EN1_INT40 0x00000100 ///< Interrupt 40 enable
+#define NVIC_EN1_INT39 0x00000080 ///< Interrupt 39 enable
+#define NVIC_EN1_INT38 0x00000040 ///< Interrupt 38 enable
+#define NVIC_EN1_INT37 0x00000020 ///< Interrupt 37 enable
+#define NVIC_EN1_INT36 0x00000010 ///< Interrupt 36 enable
+#define NVIC_EN1_INT35 0x00000008 ///< Interrupt 35 enable
+#define NVIC_EN1_INT34 0x00000004 ///< Interrupt 34 enable
+#define NVIC_EN1_INT33 0x00000002 ///< Interrupt 33 enable
+#define NVIC_EN1_INT32 0x00000001 ///< Interrupt 32 enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_DIS0 register.
+ */
+/*\{*/
+#define NVIC_DIS0_INT31 0x80000000 ///< Interrupt 31 disable
+#define NVIC_DIS0_INT30 0x40000000 ///< Interrupt 30 disable
+#define NVIC_DIS0_INT29 0x20000000 ///< Interrupt 29 disable
+#define NVIC_DIS0_INT28 0x10000000 ///< Interrupt 28 disable
+#define NVIC_DIS0_INT27 0x08000000 ///< Interrupt 27 disable
+#define NVIC_DIS0_INT26 0x04000000 ///< Interrupt 26 disable
+#define NVIC_DIS0_INT25 0x02000000 ///< Interrupt 25 disable
+#define NVIC_DIS0_INT24 0x01000000 ///< Interrupt 24 disable
+#define NVIC_DIS0_INT23 0x00800000 ///< Interrupt 23 disable
+#define NVIC_DIS0_INT22 0x00400000 ///< Interrupt 22 disable
+#define NVIC_DIS0_INT21 0x00200000 ///< Interrupt 21 disable
+#define NVIC_DIS0_INT20 0x00100000 ///< Interrupt 20 disable
+#define NVIC_DIS0_INT19 0x00080000 ///< Interrupt 19 disable
+#define NVIC_DIS0_INT18 0x00040000 ///< Interrupt 18 disable
+#define NVIC_DIS0_INT17 0x00020000 ///< Interrupt 17 disable
+#define NVIC_DIS0_INT16 0x00010000 ///< Interrupt 16 disable
+#define NVIC_DIS0_INT15 0x00008000 ///< Interrupt 15 disable
+#define NVIC_DIS0_INT14 0x00004000 ///< Interrupt 14 disable
+#define NVIC_DIS0_INT13 0x00002000 ///< Interrupt 13 disable
+#define NVIC_DIS0_INT12 0x00001000 ///< Interrupt 12 disable
+#define NVIC_DIS0_INT11 0x00000800 ///< Interrupt 11 disable
+#define NVIC_DIS0_INT10 0x00000400 ///< Interrupt 10 disable
+#define NVIC_DIS0_INT9 0x00000200 ///< Interrupt 9 disable
+#define NVIC_DIS0_INT8 0x00000100 ///< Interrupt 8 disable
+#define NVIC_DIS0_INT7 0x00000080 ///< Interrupt 7 disable
+#define NVIC_DIS0_INT6 0x00000040 ///< Interrupt 6 disable
+#define NVIC_DIS0_INT5 0x00000020 ///< Interrupt 5 disable
+#define NVIC_DIS0_INT4 0x00000010 ///< Interrupt 4 disable
+#define NVIC_DIS0_INT3 0x00000008 ///< Interrupt 3 disable
+#define NVIC_DIS0_INT2 0x00000004 ///< Interrupt 2 disable
+#define NVIC_DIS0_INT1 0x00000002 ///< Interrupt 1 disable
+#define NVIC_DIS0_INT0 0x00000001 ///< Interrupt 0 disable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_DIS1 register.
+ */
+/*\{*/
+#define NVIC_DIS1_INT59 0x08000000 ///< Interrupt 59 disable
+#define NVIC_DIS1_INT58 0x04000000 ///< Interrupt 58 disable
+#define NVIC_DIS1_INT57 0x02000000 ///< Interrupt 57 disable
+#define NVIC_DIS1_INT56 0x01000000 ///< Interrupt 56 disable
+#define NVIC_DIS1_INT55 0x00800000 ///< Interrupt 55 disable
+#define NVIC_DIS1_INT54 0x00400000 ///< Interrupt 54 disable
+#define NVIC_DIS1_INT53 0x00200000 ///< Interrupt 53 disable
+#define NVIC_DIS1_INT52 0x00100000 ///< Interrupt 52 disable
+#define NVIC_DIS1_INT51 0x00080000 ///< Interrupt 51 disable
+#define NVIC_DIS1_INT50 0x00040000 ///< Interrupt 50 disable
+#define NVIC_DIS1_INT49 0x00020000 ///< Interrupt 49 disable
+#define NVIC_DIS1_INT48 0x00010000 ///< Interrupt 48 disable
+#define NVIC_DIS1_INT47 0x00008000 ///< Interrupt 47 disable
+#define NVIC_DIS1_INT46 0x00004000 ///< Interrupt 46 disable
+#define NVIC_DIS1_INT45 0x00002000 ///< Interrupt 45 disable
+#define NVIC_DIS1_INT44 0x00001000 ///< Interrupt 44 disable
+#define NVIC_DIS1_INT43 0x00000800 ///< Interrupt 43 disable
+#define NVIC_DIS1_INT42 0x00000400 ///< Interrupt 42 disable
+#define NVIC_DIS1_INT41 0x00000200 ///< Interrupt 41 disable
+#define NVIC_DIS1_INT40 0x00000100 ///< Interrupt 40 disable
+#define NVIC_DIS1_INT39 0x00000080 ///< Interrupt 39 disable
+#define NVIC_DIS1_INT38 0x00000040 ///< Interrupt 38 disable
+#define NVIC_DIS1_INT37 0x00000020 ///< Interrupt 37 disable
+#define NVIC_DIS1_INT36 0x00000010 ///< Interrupt 36 disable
+#define NVIC_DIS1_INT35 0x00000008 ///< Interrupt 35 disable
+#define NVIC_DIS1_INT34 0x00000004 ///< Interrupt 34 disable
+#define NVIC_DIS1_INT33 0x00000002 ///< Interrupt 33 disable
+#define NVIC_DIS1_INT32 0x00000001 ///< Interrupt 32 disable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PEND0 register.
+ */
+/*\{*/
+#define NVIC_PEND0_INT31 0x80000000 ///< Interrupt 31 pend
+#define NVIC_PEND0_INT30 0x40000000 ///< Interrupt 30 pend
+#define NVIC_PEND0_INT29 0x20000000 ///< Interrupt 29 pend
+#define NVIC_PEND0_INT28 0x10000000 ///< Interrupt 28 pend
+#define NVIC_PEND0_INT27 0x08000000 ///< Interrupt 27 pend
+#define NVIC_PEND0_INT26 0x04000000 ///< Interrupt 26 pend
+#define NVIC_PEND0_INT25 0x02000000 ///< Interrupt 25 pend
+#define NVIC_PEND0_INT24 0x01000000 ///< Interrupt 24 pend
+#define NVIC_PEND0_INT23 0x00800000 ///< Interrupt 23 pend
+#define NVIC_PEND0_INT22 0x00400000 ///< Interrupt 22 pend
+#define NVIC_PEND0_INT21 0x00200000 ///< Interrupt 21 pend
+#define NVIC_PEND0_INT20 0x00100000 ///< Interrupt 20 pend
+#define NVIC_PEND0_INT19 0x00080000 ///< Interrupt 19 pend
+#define NVIC_PEND0_INT18 0x00040000 ///< Interrupt 18 pend
+#define NVIC_PEND0_INT17 0x00020000 ///< Interrupt 17 pend
+#define NVIC_PEND0_INT16 0x00010000 ///< Interrupt 16 pend
+#define NVIC_PEND0_INT15 0x00008000 ///< Interrupt 15 pend
+#define NVIC_PEND0_INT14 0x00004000 ///< Interrupt 14 pend
+#define NVIC_PEND0_INT13 0x00002000 ///< Interrupt 13 pend
+#define NVIC_PEND0_INT12 0x00001000 ///< Interrupt 12 pend
+#define NVIC_PEND0_INT11 0x00000800 ///< Interrupt 11 pend
+#define NVIC_PEND0_INT10 0x00000400 ///< Interrupt 10 pend
+#define NVIC_PEND0_INT9 0x00000200 ///< Interrupt 9 pend
+#define NVIC_PEND0_INT8 0x00000100 ///< Interrupt 8 pend
+#define NVIC_PEND0_INT7 0x00000080 ///< Interrupt 7 pend
+#define NVIC_PEND0_INT6 0x00000040 ///< Interrupt 6 pend
+#define NVIC_PEND0_INT5 0x00000020 ///< Interrupt 5 pend
+#define NVIC_PEND0_INT4 0x00000010 ///< Interrupt 4 pend
+#define NVIC_PEND0_INT3 0x00000008 ///< Interrupt 3 pend
+#define NVIC_PEND0_INT2 0x00000004 ///< Interrupt 2 pend
+#define NVIC_PEND0_INT1 0x00000002 ///< Interrupt 1 pend
+#define NVIC_PEND0_INT0 0x00000001 ///< Interrupt 0 pend
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PEND1 register.
+ */
+/*\{*/
+#define NVIC_PEND1_INT59 0x08000000 ///< Interrupt 59 pend
+#define NVIC_PEND1_INT58 0x04000000 ///< Interrupt 58 pend
+#define NVIC_PEND1_INT57 0x02000000 ///< Interrupt 57 pend
+#define NVIC_PEND1_INT56 0x01000000 ///< Interrupt 56 pend
+#define NVIC_PEND1_INT55 0x00800000 ///< Interrupt 55 pend
+#define NVIC_PEND1_INT54 0x00400000 ///< Interrupt 54 pend
+#define NVIC_PEND1_INT53 0x00200000 ///< Interrupt 53 pend
+#define NVIC_PEND1_INT52 0x00100000 ///< Interrupt 52 pend
+#define NVIC_PEND1_INT51 0x00080000 ///< Interrupt 51 pend
+#define NVIC_PEND1_INT50 0x00040000 ///< Interrupt 50 pend
+#define NVIC_PEND1_INT49 0x00020000 ///< Interrupt 49 pend
+#define NVIC_PEND1_INT48 0x00010000 ///< Interrupt 48 pend
+#define NVIC_PEND1_INT47 0x00008000 ///< Interrupt 47 pend
+#define NVIC_PEND1_INT46 0x00004000 ///< Interrupt 46 pend
+#define NVIC_PEND1_INT45 0x00002000 ///< Interrupt 45 pend
+#define NVIC_PEND1_INT44 0x00001000 ///< Interrupt 44 pend
+#define NVIC_PEND1_INT43 0x00000800 ///< Interrupt 43 pend
+#define NVIC_PEND1_INT42 0x00000400 ///< Interrupt 42 pend
+#define NVIC_PEND1_INT41 0x00000200 ///< Interrupt 41 pend
+#define NVIC_PEND1_INT40 0x00000100 ///< Interrupt 40 pend
+#define NVIC_PEND1_INT39 0x00000080 ///< Interrupt 39 pend
+#define NVIC_PEND1_INT38 0x00000040 ///< Interrupt 38 pend
+#define NVIC_PEND1_INT37 0x00000020 ///< Interrupt 37 pend
+#define NVIC_PEND1_INT36 0x00000010 ///< Interrupt 36 pend
+#define NVIC_PEND1_INT35 0x00000008 ///< Interrupt 35 pend
+#define NVIC_PEND1_INT34 0x00000004 ///< Interrupt 34 pend
+#define NVIC_PEND1_INT33 0x00000002 ///< Interrupt 33 pend
+#define NVIC_PEND1_INT32 0x00000001 ///< Interrupt 32 pend
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_UNPEND0 register.
+ */
+/*\{*/
+#define NVIC_UNPEND0_INT31 0x80000000 ///< Interrupt 31 unpend
+#define NVIC_UNPEND0_INT30 0x40000000 ///< Interrupt 30 unpend
+#define NVIC_UNPEND0_INT29 0x20000000 ///< Interrupt 29 unpend
+#define NVIC_UNPEND0_INT28 0x10000000 ///< Interrupt 28 unpend
+#define NVIC_UNPEND0_INT27 0x08000000 ///< Interrupt 27 unpend
+#define NVIC_UNPEND0_INT26 0x04000000 ///< Interrupt 26 unpend
+#define NVIC_UNPEND0_INT25 0x02000000 ///< Interrupt 25 unpend
+#define NVIC_UNPEND0_INT24 0x01000000 ///< Interrupt 24 unpend
+#define NVIC_UNPEND0_INT23 0x00800000 ///< Interrupt 23 unpend
+#define NVIC_UNPEND0_INT22 0x00400000 ///< Interrupt 22 unpend
+#define NVIC_UNPEND0_INT21 0x00200000 ///< Interrupt 21 unpend
+#define NVIC_UNPEND0_INT20 0x00100000 ///< Interrupt 20 unpend
+#define NVIC_UNPEND0_INT19 0x00080000 ///< Interrupt 19 unpend
+#define NVIC_UNPEND0_INT18 0x00040000 ///< Interrupt 18 unpend
+#define NVIC_UNPEND0_INT17 0x00020000 ///< Interrupt 17 unpend
+#define NVIC_UNPEND0_INT16 0x00010000 ///< Interrupt 16 unpend
+#define NVIC_UNPEND0_INT15 0x00008000 ///< Interrupt 15 unpend
+#define NVIC_UNPEND0_INT14 0x00004000 ///< Interrupt 14 unpend
+#define NVIC_UNPEND0_INT13 0x00002000 ///< Interrupt 13 unpend
+#define NVIC_UNPEND0_INT12 0x00001000 ///< Interrupt 12 unpend
+#define NVIC_UNPEND0_INT11 0x00000800 ///< Interrupt 11 unpend
+#define NVIC_UNPEND0_INT10 0x00000400 ///< Interrupt 10 unpend
+#define NVIC_UNPEND0_INT9 0x00000200 ///< Interrupt 9 unpend
+#define NVIC_UNPEND0_INT8 0x00000100 ///< Interrupt 8 unpend
+#define NVIC_UNPEND0_INT7 0x00000080 ///< Interrupt 7 unpend
+#define NVIC_UNPEND0_INT6 0x00000040 ///< Interrupt 6 unpend
+#define NVIC_UNPEND0_INT5 0x00000020 ///< Interrupt 5 unpend
+#define NVIC_UNPEND0_INT4 0x00000010 ///< Interrupt 4 unpend
+#define NVIC_UNPEND0_INT3 0x00000008 ///< Interrupt 3 unpend
+#define NVIC_UNPEND0_INT2 0x00000004 ///< Interrupt 2 unpend
+#define NVIC_UNPEND0_INT1 0x00000002 ///< Interrupt 1 unpend
+#define NVIC_UNPEND0_INT0 0x00000001 ///< Interrupt 0 unpend
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_UNPEND1 register.
+ */
+/*\{*/
+#define NVIC_UNPEND1_INT59 0x08000000 ///< Interrupt 59 unpend
+#define NVIC_UNPEND1_INT58 0x04000000 ///< Interrupt 58 unpend
+#define NVIC_UNPEND1_INT57 0x02000000 ///< Interrupt 57 unpend
+#define NVIC_UNPEND1_INT56 0x01000000 ///< Interrupt 56 unpend
+#define NVIC_UNPEND1_INT55 0x00800000 ///< Interrupt 55 unpend
+#define NVIC_UNPEND1_INT54 0x00400000 ///< Interrupt 54 unpend
+#define NVIC_UNPEND1_INT53 0x00200000 ///< Interrupt 53 unpend
+#define NVIC_UNPEND1_INT52 0x00100000 ///< Interrupt 52 unpend
+#define NVIC_UNPEND1_INT51 0x00080000 ///< Interrupt 51 unpend
+#define NVIC_UNPEND1_INT50 0x00040000 ///< Interrupt 50 unpend
+#define NVIC_UNPEND1_INT49 0x00020000 ///< Interrupt 49 unpend
+#define NVIC_UNPEND1_INT48 0x00010000 ///< Interrupt 48 unpend
+#define NVIC_UNPEND1_INT47 0x00008000 ///< Interrupt 47 unpend
+#define NVIC_UNPEND1_INT46 0x00004000 ///< Interrupt 46 unpend
+#define NVIC_UNPEND1_INT45 0x00002000 ///< Interrupt 45 unpend
+#define NVIC_UNPEND1_INT44 0x00001000 ///< Interrupt 44 unpend
+#define NVIC_UNPEND1_INT43 0x00000800 ///< Interrupt 43 unpend
+#define NVIC_UNPEND1_INT42 0x00000400 ///< Interrupt 42 unpend
+#define NVIC_UNPEND1_INT41 0x00000200 ///< Interrupt 41 unpend
+#define NVIC_UNPEND1_INT40 0x00000100 ///< Interrupt 40 unpend
+#define NVIC_UNPEND1_INT39 0x00000080 ///< Interrupt 39 unpend
+#define NVIC_UNPEND1_INT38 0x00000040 ///< Interrupt 38 unpend
+#define NVIC_UNPEND1_INT37 0x00000020 ///< Interrupt 37 unpend
+#define NVIC_UNPEND1_INT36 0x00000010 ///< Interrupt 36 unpend
+#define NVIC_UNPEND1_INT35 0x00000008 ///< Interrupt 35 unpend
+#define NVIC_UNPEND1_INT34 0x00000004 ///< Interrupt 34 unpend
+#define NVIC_UNPEND1_INT33 0x00000002 ///< Interrupt 33 unpend
+#define NVIC_UNPEND1_INT32 0x00000001 ///< Interrupt 32 unpend
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_ACTIVE0 register.
+ */
+/*\{*/
+#define NVIC_ACTIVE0_INT31 0x80000000 ///< Interrupt 31 active
+#define NVIC_ACTIVE0_INT30 0x40000000 ///< Interrupt 30 active
+#define NVIC_ACTIVE0_INT29 0x20000000 ///< Interrupt 29 active
+#define NVIC_ACTIVE0_INT28 0x10000000 ///< Interrupt 28 active
+#define NVIC_ACTIVE0_INT27 0x08000000 ///< Interrupt 27 active
+#define NVIC_ACTIVE0_INT26 0x04000000 ///< Interrupt 26 active
+#define NVIC_ACTIVE0_INT25 0x02000000 ///< Interrupt 25 active
+#define NVIC_ACTIVE0_INT24 0x01000000 ///< Interrupt 24 active
+#define NVIC_ACTIVE0_INT23 0x00800000 ///< Interrupt 23 active
+#define NVIC_ACTIVE0_INT22 0x00400000 ///< Interrupt 22 active
+#define NVIC_ACTIVE0_INT21 0x00200000 ///< Interrupt 21 active
+#define NVIC_ACTIVE0_INT20 0x00100000 ///< Interrupt 20 active
+#define NVIC_ACTIVE0_INT19 0x00080000 ///< Interrupt 19 active
+#define NVIC_ACTIVE0_INT18 0x00040000 ///< Interrupt 18 active
+#define NVIC_ACTIVE0_INT17 0x00020000 ///< Interrupt 17 active
+#define NVIC_ACTIVE0_INT16 0x00010000 ///< Interrupt 16 active
+#define NVIC_ACTIVE0_INT15 0x00008000 ///< Interrupt 15 active
+#define NVIC_ACTIVE0_INT14 0x00004000 ///< Interrupt 14 active
+#define NVIC_ACTIVE0_INT13 0x00002000 ///< Interrupt 13 active
+#define NVIC_ACTIVE0_INT12 0x00001000 ///< Interrupt 12 active
+#define NVIC_ACTIVE0_INT11 0x00000800 ///< Interrupt 11 active
+#define NVIC_ACTIVE0_INT10 0x00000400 ///< Interrupt 10 active
+#define NVIC_ACTIVE0_INT9 0x00000200 ///< Interrupt 9 active
+#define NVIC_ACTIVE0_INT8 0x00000100 ///< Interrupt 8 active
+#define NVIC_ACTIVE0_INT7 0x00000080 ///< Interrupt 7 active
+#define NVIC_ACTIVE0_INT6 0x00000040 ///< Interrupt 6 active
+#define NVIC_ACTIVE0_INT5 0x00000020 ///< Interrupt 5 active
+#define NVIC_ACTIVE0_INT4 0x00000010 ///< Interrupt 4 active
+#define NVIC_ACTIVE0_INT3 0x00000008 ///< Interrupt 3 active
+#define NVIC_ACTIVE0_INT2 0x00000004 ///< Interrupt 2 active
+#define NVIC_ACTIVE0_INT1 0x00000002 ///< Interrupt 1 active
+#define NVIC_ACTIVE0_INT0 0x00000001 ///< Interrupt 0 active
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_ACTIVE1 register.
+ */
+/*\{*/
+#define NVIC_ACTIVE1_INT59 0x08000000 ///< Interrupt 59 active
+#define NVIC_ACTIVE1_INT58 0x04000000 ///< Interrupt 58 active
+#define NVIC_ACTIVE1_INT57 0x02000000 ///< Interrupt 57 active
+#define NVIC_ACTIVE1_INT56 0x01000000 ///< Interrupt 56 active
+#define NVIC_ACTIVE1_INT55 0x00800000 ///< Interrupt 55 active
+#define NVIC_ACTIVE1_INT54 0x00400000 ///< Interrupt 54 active
+#define NVIC_ACTIVE1_INT53 0x00200000 ///< Interrupt 53 active
+#define NVIC_ACTIVE1_INT52 0x00100000 ///< Interrupt 52 active
+#define NVIC_ACTIVE1_INT51 0x00080000 ///< Interrupt 51 active
+#define NVIC_ACTIVE1_INT50 0x00040000 ///< Interrupt 50 active
+#define NVIC_ACTIVE1_INT49 0x00020000 ///< Interrupt 49 active
+#define NVIC_ACTIVE1_INT48 0x00010000 ///< Interrupt 48 active
+#define NVIC_ACTIVE1_INT47 0x00008000 ///< Interrupt 47 active
+#define NVIC_ACTIVE1_INT46 0x00004000 ///< Interrupt 46 active
+#define NVIC_ACTIVE1_INT45 0x00002000 ///< Interrupt 45 active
+#define NVIC_ACTIVE1_INT44 0x00001000 ///< Interrupt 44 active
+#define NVIC_ACTIVE1_INT43 0x00000800 ///< Interrupt 43 active
+#define NVIC_ACTIVE1_INT42 0x00000400 ///< Interrupt 42 active
+#define NVIC_ACTIVE1_INT41 0x00000200 ///< Interrupt 41 active
+#define NVIC_ACTIVE1_INT40 0x00000100 ///< Interrupt 40 active
+#define NVIC_ACTIVE1_INT39 0x00000080 ///< Interrupt 39 active
+#define NVIC_ACTIVE1_INT38 0x00000040 ///< Interrupt 38 active
+#define NVIC_ACTIVE1_INT37 0x00000020 ///< Interrupt 37 active
+#define NVIC_ACTIVE1_INT36 0x00000010 ///< Interrupt 36 active
+#define NVIC_ACTIVE1_INT35 0x00000008 ///< Interrupt 35 active
+#define NVIC_ACTIVE1_INT34 0x00000004 ///< Interrupt 34 active
+#define NVIC_ACTIVE1_INT33 0x00000002 ///< Interrupt 33 active
+#define NVIC_ACTIVE1_INT32 0x00000001 ///< Interrupt 32 active
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI0 register.
+ */
+/*\{*/
+#define NVIC_PRI0_INT3_M 0xFF000000 ///< Interrupt 3 priority mask
+#define NVIC_PRI0_INT2_M 0x00FF0000 ///< Interrupt 2 priority mask
+#define NVIC_PRI0_INT1_M 0x0000FF00 ///< Interrupt 1 priority mask
+#define NVIC_PRI0_INT0_M 0x000000FF ///< Interrupt 0 priority mask
+#define NVIC_PRI0_INT3_S 24
+#define NVIC_PRI0_INT2_S 16
+#define NVIC_PRI0_INT1_S 8
+#define NVIC_PRI0_INT0_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI1 register.
+ */
+/*\{*/
+#define NVIC_PRI1_INT7_M 0xFF000000 ///< Interrupt 7 priority mask
+#define NVIC_PRI1_INT6_M 0x00FF0000 ///< Interrupt 6 priority mask
+#define NVIC_PRI1_INT5_M 0x0000FF00 ///< Interrupt 5 priority mask
+#define NVIC_PRI1_INT4_M 0x000000FF ///< Interrupt 4 priority mask
+#define NVIC_PRI1_INT7_S 24
+#define NVIC_PRI1_INT6_S 16
+#define NVIC_PRI1_INT5_S 8
+#define NVIC_PRI1_INT4_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI2 register.
+ */
+/*\{*/
+#define NVIC_PRI2_INT11_M 0xFF000000 ///< Interrupt 11 priority mask
+#define NVIC_PRI2_INT10_M 0x00FF0000 ///< Interrupt 10 priority mask
+#define NVIC_PRI2_INT9_M 0x0000FF00 ///< Interrupt 9 priority mask
+#define NVIC_PRI2_INT8_M 0x000000FF ///< Interrupt 8 priority mask
+#define NVIC_PRI2_INT11_S 24
+#define NVIC_PRI2_INT10_S 16
+#define NVIC_PRI2_INT9_S 8
+#define NVIC_PRI2_INT8_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI3 register.
+ */
+/*\{*/
+#define NVIC_PRI3_INT15_M 0xFF000000 ///< Interrupt 15 priority mask
+#define NVIC_PRI3_INT14_M 0x00FF0000 ///< Interrupt 14 priority mask
+#define NVIC_PRI3_INT13_M 0x0000FF00 ///< Interrupt 13 priority mask
+#define NVIC_PRI3_INT12_M 0x000000FF ///< Interrupt 12 priority mask
+#define NVIC_PRI3_INT15_S 24
+#define NVIC_PRI3_INT14_S 16
+#define NVIC_PRI3_INT13_S 8
+#define NVIC_PRI3_INT12_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI4 register.
+ */
+/*\{*/
+#define NVIC_PRI4_INT19_M 0xFF000000 ///< Interrupt 19 priority mask
+#define NVIC_PRI4_INT18_M 0x00FF0000 ///< Interrupt 18 priority mask
+#define NVIC_PRI4_INT17_M 0x0000FF00 ///< Interrupt 17 priority mask
+#define NVIC_PRI4_INT16_M 0x000000FF ///< Interrupt 16 priority mask
+#define NVIC_PRI4_INT19_S 24
+#define NVIC_PRI4_INT18_S 16
+#define NVIC_PRI4_INT17_S 8
+#define NVIC_PRI4_INT16_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI5 register.
+ */
+/*\{*/
+#define NVIC_PRI5_INT23_M 0xFF000000 ///< Interrupt 23 priority mask
+#define NVIC_PRI5_INT22_M 0x00FF0000 ///< Interrupt 22 priority mask
+#define NVIC_PRI5_INT21_M 0x0000FF00 ///< Interrupt 21 priority mask
+#define NVIC_PRI5_INT20_M 0x000000FF ///< Interrupt 20 priority mask
+#define NVIC_PRI5_INT23_S 24
+#define NVIC_PRI5_INT22_S 16
+#define NVIC_PRI5_INT21_S 8
+#define NVIC_PRI5_INT20_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI6 register.
+ */
+/*\{*/
+#define NVIC_PRI6_INT27_M 0xFF000000 ///< Interrupt 27 priority mask
+#define NVIC_PRI6_INT26_M 0x00FF0000 ///< Interrupt 26 priority mask
+#define NVIC_PRI6_INT25_M 0x0000FF00 ///< Interrupt 25 priority mask
+#define NVIC_PRI6_INT24_M 0x000000FF ///< Interrupt 24 priority mask
+#define NVIC_PRI6_INT27_S 24
+#define NVIC_PRI6_INT26_S 16
+#define NVIC_PRI6_INT25_S 8
+#define NVIC_PRI6_INT24_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI7 register.
+ */
+/*\{*/
+#define NVIC_PRI7_INT31_M 0xFF000000 ///< Interrupt 31 priority mask
+#define NVIC_PRI7_INT30_M 0x00FF0000 ///< Interrupt 30 priority mask
+#define NVIC_PRI7_INT29_M 0x0000FF00 ///< Interrupt 29 priority mask
+#define NVIC_PRI7_INT28_M 0x000000FF ///< Interrupt 28 priority mask
+#define NVIC_PRI7_INT31_S 24
+#define NVIC_PRI7_INT30_S 16
+#define NVIC_PRI7_INT29_S 8
+#define NVIC_PRI7_INT28_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI8 register.
+ */
+/*\{*/
+#define NVIC_PRI8_INT35_M 0xFF000000 ///< Interrupt 35 priority mask
+#define NVIC_PRI8_INT34_M 0x00FF0000 ///< Interrupt 34 priority mask
+#define NVIC_PRI8_INT33_M 0x0000FF00 ///< Interrupt 33 priority mask
+#define NVIC_PRI8_INT32_M 0x000000FF ///< Interrupt 32 priority mask
+#define NVIC_PRI8_INT35_S 24
+#define NVIC_PRI8_INT34_S 16
+#define NVIC_PRI8_INT33_S 8
+#define NVIC_PRI8_INT32_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI9 register.
+ */
+/*\{*/
+#define NVIC_PRI9_INT39_M 0xFF000000 ///< Interrupt 39 priority mask
+#define NVIC_PRI9_INT38_M 0x00FF0000 ///< Interrupt 38 priority mask
+#define NVIC_PRI9_INT37_M 0x0000FF00 ///< Interrupt 37 priority mask
+#define NVIC_PRI9_INT36_M 0x000000FF ///< Interrupt 36 priority mask
+#define NVIC_PRI9_INT39_S 24
+#define NVIC_PRI9_INT38_S 16
+#define NVIC_PRI9_INT37_S 8
+#define NVIC_PRI9_INT36_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_PRI10 register.
+ */
+/*\{*/
+#define NVIC_PRI10_INT43_M 0xFF000000 ///< Interrupt 43 priority mask
+#define NVIC_PRI10_INT42_M 0x00FF0000 ///< Interrupt 42 priority mask
+#define NVIC_PRI10_INT41_M 0x0000FF00 ///< Interrupt 41 priority mask
+#define NVIC_PRI10_INT40_M 0x000000FF ///< Interrupt 40 priority mask
+#define NVIC_PRI10_INT43_S 24
+#define NVIC_PRI10_INT42_S 16
+#define NVIC_PRI10_INT41_S 8
+#define NVIC_PRI10_INT40_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_CPUID register.
+ */
+/*\{*/
+#define NVIC_CPUID_IMP_M 0xFF000000 ///< Implementer
+#define NVIC_CPUID_VAR_M 0x00F00000 ///< Variant
+#define NVIC_CPUID_PARTNO_M 0x0000FFF0 ///< Processor part number
+#define NVIC_CPUID_REV_M 0x0000000F ///< Revision
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_INT_CTRL register.
+ */
+/*\{*/
+#define NVIC_INT_CTRL_NMI_SET 0x80000000 ///< Pend a NMI
+#define NVIC_INT_CTRL_PEND_SV 0x10000000 ///< Pend a PendSV
+#define NVIC_INT_CTRL_UNPEND_SV 0x08000000 ///< Unpend a PendSV
+#define NVIC_INT_CTRL_PENDSTSET 0x04000000 ///< Set pending SysTick interrupt
+#define NVIC_INT_CTRL_PENDSTCLR 0x02000000 ///< Clear pending SysTick interrupt
+#define NVIC_INT_CTRL_ISR_PRE 0x00800000 ///< Debug interrupt handling
+#define NVIC_INT_CTRL_ISR_PEND 0x00400000 ///< Debug interrupt pending
+#define NVIC_INT_CTRL_VEC_PEN_M 0x003FF000 ///< Highest pending exception
+#define NVIC_INT_CTRL_RET_BASE 0x00000800 ///< Return to base
+#define NVIC_INT_CTRL_VEC_ACT_M 0x000003FF ///< Current active exception
+#define NVIC_INT_CTRL_VEC_PEN_S 12
+#define NVIC_INT_CTRL_VEC_ACT_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_VTABLE register.
+ */
+/*\{*/
+#define NVIC_VTABLE_BASE 0x20000000 ///< Vector table base
+#define NVIC_VTABLE_OFFSET_M 0x1FFFFF00 ///< Vector table offset
+#define NVIC_VTABLE_OFFSET_S 8
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_APINT register.
+ */
+/*\{*/
+#define NVIC_APINT_VECTKEY_M 0xFFFF0000 ///< Vector key mask
+#define NVIC_APINT_VECTKEY 0x05FA0000 ///< Vector key
+#define NVIC_APINT_ENDIANESS 0x00008000 ///< Data endianess
+#define NVIC_APINT_PRIGROUP_M 0x00000700 ///< Priority group
+#define NVIC_APINT_PRIGROUP_0_8 0x00000700 ///< Priority group 0.8 split
+#define NVIC_APINT_PRIGROUP_1_7 0x00000600 ///< Priority group 1.7 split
+#define NVIC_APINT_PRIGROUP_2_6 0x00000500 ///< Priority group 2.6 split
+#define NVIC_APINT_PRIGROUP_3_5 0x00000400 ///< Priority group 3.5 split
+#define NVIC_APINT_PRIGROUP_4_4 0x00000300 ///< Priority group 4.4 split
+#define NVIC_APINT_PRIGROUP_5_3 0x00000200 ///< Priority group 5.3 split
+#define NVIC_APINT_PRIGROUP_6_2 0x00000100 ///< Priority group 6.2 split
+#define NVIC_APINT_SYSRESETREQ 0x00000004 ///< System reset request
+#define NVIC_APINT_VECT_CLR_ACT 0x00000002 ///< Clear active NMI/fault info
+#define NVIC_APINT_VECT_RESET 0x00000001 ///< System reset
+#define NVIC_APINT_PRIGROUP_7_1 0x00000000 ///< Priority group 7.1 split
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_SYS_CTRL register.
+ */
+/*\{*/
+#define NVIC_SYS_CTRL_SEVONPEND 0x00000010 ///< Wakeup on pend
+#define NVIC_SYS_CTRL_SLEEPDEEP 0x00000004 ///< Deep sleep enable
+#define NVIC_SYS_CTRL_SLEEPEXIT 0x00000002 ///< Sleep on ISR exit
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_CFG_CTRL register.
+ */
+/*\{*/
+#define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100 ///< Ignore bus fault in NMI/fault
+#define NVIC_CFG_CTRL_DIV0 0x00000010 ///< Trap on divide by 0
+#define NVIC_CFG_CTRL_UNALIGNED 0x00000008 ///< Trap on unaligned access
+#define NVIC_CFG_CTRL_DEEP_PEND 0x00000004 ///< Allow deep interrupt trigger
+#define NVIC_CFG_CTRL_MAIN_PEND 0x00000002 ///< Allow main interrupt trigger
+#define NVIC_CFG_CTRL_BASE_THR 0x00000001 ///< Thread state control
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_SYS_PRI1 register.
+ */
+/*\{*/
+#define NVIC_SYS_PRI1_RES_M 0xFF000000 ///< Priority of reserved handler
+#define NVIC_SYS_PRI1_USAGE_M 0x00FF0000 ///< Priority of usage fault handler
+#define NVIC_SYS_PRI1_BUS_M 0x0000FF00 ///< Priority of bus fault handler
+#define NVIC_SYS_PRI1_MEM_M 0x000000FF ///< Priority of mem manage handler
+#define NVIC_SYS_PRI1_USAGE_S 16
+#define NVIC_SYS_PRI1_BUS_S 8
+#define NVIC_SYS_PRI1_MEM_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_SYS_PRI2 register.
+ */
+/*\{*/
+#define NVIC_SYS_PRI2_SVC_M 0xFF000000 ///< Priority of SVCall handler
+#define NVIC_SYS_PRI2_RES_M 0x00FFFFFF ///< Priority of reserved handlers
+#define NVIC_SYS_PRI2_SVC_S 24
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_SYS_PRI3 register.
+ */
+/*\{*/
+#define NVIC_SYS_PRI3_TICK_M 0xFF000000 ///< Priority of Sys Tick handler
+#define NVIC_SYS_PRI3_PENDSV_M 0x00FF0000 ///< Priority of PendSV handler
+#define NVIC_SYS_PRI3_RES_M 0x0000FF00 ///< Priority of reserved handler
+#define NVIC_SYS_PRI3_DEBUG_M 0x000000FF ///< Priority of debug handler
+#define NVIC_SYS_PRI3_TICK_S 24
+#define NVIC_SYS_PRI3_PENDSV_S 16
+#define NVIC_SYS_PRI3_DEBUG_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_SYS_HND_CTRL
+* register.
+ */
+/*\{*/
+#define NVIC_SYS_HND_CTRL_USAGE 0x00040000 ///< Usage fault enable
+#define NVIC_SYS_HND_CTRL_BUS 0x00020000 ///< Bus fault enable
+#define NVIC_SYS_HND_CTRL_MEM 0x00010000 ///< Mem manage fault enable
+#define NVIC_SYS_HND_CTRL_SVC 0x00008000 ///< SVCall is pended
+#define NVIC_SYS_HND_CTRL_BUSP 0x00004000 ///< Bus fault is pended
+#define NVIC_SYS_HND_CTRL_TICK 0x00000800 ///< Sys tick is active
+#define NVIC_SYS_HND_CTRL_PNDSV 0x00000400 ///< PendSV is active
+#define NVIC_SYS_HND_CTRL_MON 0x00000100 ///< Monitor is active
+#define NVIC_SYS_HND_CTRL_SVCA 0x00000080 ///< SVCall is active
+#define NVIC_SYS_HND_CTRL_USGA 0x00000008 ///< Usage fault is active
+#define NVIC_SYS_HND_CTRL_BUSA 0x00000002 ///< Bus fault is active
+#define NVIC_SYS_HND_CTRL_MEMA 0x00000001 ///< Mem manage is active
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_FAULT_STAT
+* register.
+ */
+/*\{*/
+#define NVIC_FAULT_STAT_DIV0 0x02000000 ///< Divide by zero fault
+#define NVIC_FAULT_STAT_UNALIGN 0x01000000 ///< Unaligned access fault
+#define NVIC_FAULT_STAT_NOCP 0x00080000 ///< No coprocessor fault
+#define NVIC_FAULT_STAT_INVPC 0x00040000 ///< Invalid PC fault
+#define NVIC_FAULT_STAT_INVSTAT 0x00020000 ///< Invalid state fault
+#define NVIC_FAULT_STAT_UNDEF 0x00010000 ///< Undefined instruction fault
+#define NVIC_FAULT_STAT_BFARV 0x00008000 ///< BFAR is valid
+#define NVIC_FAULT_STAT_BSTKE 0x00001000 ///< Stack bus fault
+#define NVIC_FAULT_STAT_BUSTKE 0x00000800 ///< Unstack bus fault
+#define NVIC_FAULT_STAT_IMPRE 0x00000400 ///< Imprecise data bus error
+#define NVIC_FAULT_STAT_PRECISE 0x00000200 ///< Precise data bus error
+#define NVIC_FAULT_STAT_IBUS 0x00000100 ///< Instruction bus fault
+#define NVIC_FAULT_STAT_MMARV 0x00000080 ///< MMAR is valid
+#define NVIC_FAULT_STAT_MSTKE 0x00000010 ///< Stack access violation
+#define NVIC_FAULT_STAT_MUSTKE 0x00000008 ///< Unstack access violation
+#define NVIC_FAULT_STAT_DERR 0x00000002 ///< Data access violation
+#define NVIC_FAULT_STAT_IERR 0x00000001 ///< Instruction access violation
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_HFAULT_STAT
+* register.
+ */
+/*\{*/
+#define NVIC_HFAULT_STAT_DBG 0x80000000 ///< Debug event
+#define NVIC_HFAULT_STAT_FORCED 0x40000000 ///< Cannot execute fault handler
+#define NVIC_HFAULT_STAT_VECT 0x00000002 ///< Vector table read fault
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_DEBUG_STAT
+* register.
+ */
+/*\{*/
+#define NVIC_DEBUG_STAT_EXTRNL 0x00000010 ///< EDBGRQ asserted
+#define NVIC_DEBUG_STAT_VCATCH 0x00000008 ///< Vector catch
+#define NVIC_DEBUG_STAT_DWTTRAP 0x00000004 ///< DWT match
+#define NVIC_DEBUG_STAT_BKPT 0x00000002 ///< Breakpoint instruction
+#define NVIC_DEBUG_STAT_HALTED 0x00000001 ///< Halt request
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_MM_ADDR register.
+ */
+/*\{*/
+#define NVIC_MM_ADDR_M 0xFFFFFFFF ///< Data fault address
+#define NVIC_MM_ADDR_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_FAULT_ADDR
+* register.
+ */
+/*\{*/
+#define NVIC_FAULT_ADDR_M 0xFFFFFFFF ///< Data bus fault address
+#define NVIC_FAULT_ADDR_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_MPU_TYPE register.
+ */
+/*\{*/
+#define NVIC_MPU_TYPE_IREGION_M 0x00FF0000 ///< Number of I regions
+#define NVIC_MPU_TYPE_DREGION_M 0x0000FF00 ///< Number of D regions
+#define NVIC_MPU_TYPE_SEPARATE 0x00000001 ///< Separate or unified MPU
+#define NVIC_MPU_TYPE_IREGION_S 16
+#define NVIC_MPU_TYPE_DREGION_S 8
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_MPU_CTRL register.
+ */
+/*\{*/
+#define NVIC_MPU_CTRL_PRIVDEFEN 0x00000004 ///< MPU default region in priv mode
+#define NVIC_MPU_CTRL_HFNMIENA 0x00000002 ///< MPU enabled during faults
+#define NVIC_MPU_CTRL_ENABLE 0x00000001 ///< MPU enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_MPU_NUMBER
+* register.
+ */
+/*\{*/
+#define NVIC_MPU_NUMBER_M 0x000000FF ///< MPU region to access
+#define NVIC_MPU_NUMBER_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_MPU_BASE register.
+ */
+/*\{*/
+#define NVIC_MPU_BASE_ADDR_M 0xFFFFFFE0 ///< Base address mask
+#define NVIC_MPU_BASE_VALID 0x00000010 ///< Region number valid
+#define NVIC_MPU_BASE_REGION_M 0x0000000F ///< Region number
+#define NVIC_MPU_BASE_ADDR_S 8
+#define NVIC_MPU_BASE_REGION_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_MPU_ATTR register.
+ */
+/*\{*/
+#define NVIC_MPU_ATTR_M 0xFFFF0000 ///< Attributes
+#define NVIC_MPU_ATTR_AP_NO_NO 0x00000000 ///< prv: no access, usr: no access
+#define NVIC_MPU_ATTR_BUFFRABLE 0x00010000 ///< Bufferable
+#define NVIC_MPU_ATTR_CACHEABLE 0x00020000 ///< Cacheable
+#define NVIC_MPU_ATTR_SHAREABLE 0x00040000 ///< Shareable
+#define NVIC_MPU_ATTR_TEX_M 0x00380000 ///< Type extension mask
+#define NVIC_MPU_ATTR_AP_RW_NO 0x01000000 ///< prv: rw, usr: none
+#define NVIC_MPU_ATTR_AP_RW_RO 0x02000000 ///< prv: rw, usr: read-only
+#define NVIC_MPU_ATTR_AP_RW_RW 0x03000000 ///< prv: rw, usr: rw
+#define NVIC_MPU_ATTR_AP_RO_NO 0x05000000 ///< prv: ro, usr: none
+#define NVIC_MPU_ATTR_AP_RO_RO 0x06000000 ///< prv: ro, usr: ro
+#define NVIC_MPU_ATTR_AP_M 0x07000000 ///< Access permissions mask
+#define NVIC_MPU_ATTR_XN 0x10000000 ///< Execute disable
+#define NVIC_MPU_ATTR_SRD_M 0x0000FF00 ///< Sub-region disable mask
+#define NVIC_MPU_ATTR_SRD_0 0x00000100 ///< Sub-region 0 disable
+#define NVIC_MPU_ATTR_SRD_1 0x00000200 ///< Sub-region 1 disable
+#define NVIC_MPU_ATTR_SRD_2 0x00000400 ///< Sub-region 2 disable
+#define NVIC_MPU_ATTR_SRD_3 0x00000800 ///< Sub-region 3 disable
+#define NVIC_MPU_ATTR_SRD_4 0x00001000 ///< Sub-region 4 disable
+#define NVIC_MPU_ATTR_SRD_5 0x00002000 ///< Sub-region 5 disable
+#define NVIC_MPU_ATTR_SRD_6 0x00004000 ///< Sub-region 6 disable
+#define NVIC_MPU_ATTR_SRD_7 0x00008000 ///< Sub-region 7 disable
+#define NVIC_MPU_ATTR_SIZE_M 0x0000003E ///< Region size mask
+#define NVIC_MPU_ATTR_SIZE_32B 0x00000008 ///< Region size 32 bytes
+#define NVIC_MPU_ATTR_SIZE_64B 0x0000000A ///< Region size 64 bytes
+#define NVIC_MPU_ATTR_SIZE_128B 0x0000000C ///< Region size 128 bytes
+#define NVIC_MPU_ATTR_SIZE_256B 0x0000000E ///< Region size 256 bytes
+#define NVIC_MPU_ATTR_SIZE_512B 0x00000010 ///< Region size 512 bytes
+#define NVIC_MPU_ATTR_SIZE_1K 0x00000012 ///< Region size 1 Kbytes
+#define NVIC_MPU_ATTR_SIZE_2K 0x00000014 ///< Region size 2 Kbytes
+#define NVIC_MPU_ATTR_SIZE_4K 0x00000016 ///< Region size 4 Kbytes
+#define NVIC_MPU_ATTR_SIZE_8K 0x00000018 ///< Region size 8 Kbytes
+#define NVIC_MPU_ATTR_SIZE_16K 0x0000001A ///< Region size 16 Kbytes
+#define NVIC_MPU_ATTR_SIZE_32K 0x0000001C ///< Region size 32 Kbytes
+#define NVIC_MPU_ATTR_SIZE_64K 0x0000001E ///< Region size 64 Kbytes
+#define NVIC_MPU_ATTR_SIZE_128K 0x00000020 ///< Region size 128 Kbytes
+#define NVIC_MPU_ATTR_SIZE_256K 0x00000022 ///< Region size 256 Kbytes
+#define NVIC_MPU_ATTR_SIZE_512K 0x00000024 ///< Region size 512 Kbytes
+#define NVIC_MPU_ATTR_SIZE_1M 0x00000026 ///< Region size 1 Mbytes
+#define NVIC_MPU_ATTR_SIZE_2M 0x00000028 ///< Region size 2 Mbytes
+#define NVIC_MPU_ATTR_SIZE_4M 0x0000002A ///< Region size 4 Mbytes
+#define NVIC_MPU_ATTR_SIZE_8M 0x0000002C ///< Region size 8 Mbytes
+#define NVIC_MPU_ATTR_SIZE_16M 0x0000002E ///< Region size 16 Mbytes
+#define NVIC_MPU_ATTR_SIZE_32M 0x00000030 ///< Region size 32 Mbytes
+#define NVIC_MPU_ATTR_SIZE_64M 0x00000032 ///< Region size 64 Mbytes
+#define NVIC_MPU_ATTR_SIZE_128M 0x00000034 ///< Region size 128 Mbytes
+#define NVIC_MPU_ATTR_SIZE_256M 0x00000036 ///< Region size 256 Mbytes
+#define NVIC_MPU_ATTR_SIZE_512M 0x00000038 ///< Region size 512 Mbytes
+#define NVIC_MPU_ATTR_SIZE_1G 0x0000003A ///< Region size 1 Gbytes
+#define NVIC_MPU_ATTR_SIZE_2G 0x0000003C ///< Region size 2 Gbytes
+#define NVIC_MPU_ATTR_SIZE_4G 0x0000003E ///< Region size 4 Gbytes
+#define NVIC_MPU_ATTR_ENABLE 0x00000001 ///< Region enable
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_DBG_CTRL register.
+ */
+/*\{*/
+#define NVIC_DBG_CTRL_DBGKEY_M 0xFFFF0000 ///< Debug key mask
+#define NVIC_DBG_CTRL_DBGKEY 0xA05F0000 ///< Debug key
+#define NVIC_DBG_CTRL_S_RESET_ST \
+ 0x02000000 ///< Core has reset since last read
+#define NVIC_DBG_CTRL_S_RETIRE_ST \
+ 0x01000000 ///< Core has executed insruction
+ ///< since last read
+#define NVIC_DBG_CTRL_S_LOCKUP 0x00080000 ///< Core is locked up
+#define NVIC_DBG_CTRL_S_SLEEP 0x00040000 ///< Core is sleeping
+#define NVIC_DBG_CTRL_S_HALT 0x00020000 ///< Core status on halt
+#define NVIC_DBG_CTRL_S_REGRDY 0x00010000 ///< Register read/write available
+#define NVIC_DBG_CTRL_C_SNAPSTALL \
+ 0x00000020 ///< Breaks a stalled load/store
+#define NVIC_DBG_CTRL_C_MASKINT 0x00000008 ///< Mask interrupts when stepping
+#define NVIC_DBG_CTRL_C_STEP 0x00000004 ///< Step the core
+#define NVIC_DBG_CTRL_C_HALT 0x00000002 ///< Halt the core
+#define NVIC_DBG_CTRL_C_DEBUGEN 0x00000001 ///< Enable debug
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_DBG_XFER register.
+ */
+/*\{*/
+#define NVIC_DBG_XFER_REG_WNR 0x00010000 ///< Write or not read
+#define NVIC_DBG_XFER_REG_SEL_M 0x0000001F ///< Register
+#define NVIC_DBG_XFER_REG_CFBP 0x00000014 ///< Control/Fault/BasePri/PriMask
+#define NVIC_DBG_XFER_REG_DSP 0x00000013 ///< Deep SP
+#define NVIC_DBG_XFER_REG_PSP 0x00000012 ///< Process SP
+#define NVIC_DBG_XFER_REG_MSP 0x00000011 ///< Main SP
+#define NVIC_DBG_XFER_REG_FLAGS 0x00000010 ///< xPSR/Flags register
+#define NVIC_DBG_XFER_REG_R15 0x0000000F ///< Register R15
+#define NVIC_DBG_XFER_REG_R14 0x0000000E ///< Register R14
+#define NVIC_DBG_XFER_REG_R13 0x0000000D ///< Register R13
+#define NVIC_DBG_XFER_REG_R12 0x0000000C ///< Register R12
+#define NVIC_DBG_XFER_REG_R11 0x0000000B ///< Register R11
+#define NVIC_DBG_XFER_REG_R10 0x0000000A ///< Register R10
+#define NVIC_DBG_XFER_REG_R9 0x00000009 ///< Register R9
+#define NVIC_DBG_XFER_REG_R8 0x00000008 ///< Register R8
+#define NVIC_DBG_XFER_REG_R7 0x00000007 ///< Register R7
+#define NVIC_DBG_XFER_REG_R6 0x00000006 ///< Register R6
+#define NVIC_DBG_XFER_REG_R5 0x00000005 ///< Register R5
+#define NVIC_DBG_XFER_REG_R4 0x00000004 ///< Register R4
+#define NVIC_DBG_XFER_REG_R3 0x00000003 ///< Register R3
+#define NVIC_DBG_XFER_REG_R2 0x00000002 ///< Register R2
+#define NVIC_DBG_XFER_REG_R1 0x00000001 ///< Register R1
+#define NVIC_DBG_XFER_REG_R0 0x00000000 ///< Register R0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_DBG_DATA register.
+ */
+/*\{*/
+#define NVIC_DBG_DATA_M 0xFFFFFFFF ///< Data temporary cache
+#define NVIC_DBG_DATA_S 0
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_DBG_INT register.
+ */
+/*\{*/
+#define NVIC_DBG_INT_HARDERR 0x00000400 ///< Debug trap on hard fault
+#define NVIC_DBG_INT_INTERR 0x00000200 ///< Debug trap on interrupt errors
+#define NVIC_DBG_INT_BUSERR 0x00000100 ///< Debug trap on bus error
+#define NVIC_DBG_INT_STATERR 0x00000080 ///< Debug trap on usage fault state
+#define NVIC_DBG_INT_CHKERR 0x00000040 ///< Debug trap on usage fault check
+#define NVIC_DBG_INT_NOCPERR 0x00000020 ///< Debug trap on coprocessor error
+#define NVIC_DBG_INT_MMERR 0x00000010 ///< Debug trap on mem manage fault
+#define NVIC_DBG_INT_RESET 0x00000008 ///< Core reset status
+#define NVIC_DBG_INT_RSTPENDCLR 0x00000004 ///< Clear pending core reset
+#define NVIC_DBG_INT_RSTPENDING 0x00000002 ///< Core reset is pending
+#define NVIC_DBG_INT_RSTVCATCH 0x00000001 ///< Reset vector catch
+/*\}*/
+
+/**
+ * The following are defines for the bit fields in the NVIC_SW_TRIG register.
+ */
+/*\{*/
+#define NVIC_SW_TRIG_INTID_M 0x000003FF ///< Interrupt to trigger
+#define NVIC_SW_TRIG_INTID_S 0
+/*\}*/
+
+/**
+ * The following definitions are deprecated.
+ */
+#ifndef DEPRECATED
+
+/**
+ * Deprecated defines for the Watchdog
+ */
+/*\{*/
+#define WATCHDOG_LOAD_R (*((reg32_t *)0x40000000))
+#define WATCHDOG_VALUE_R (*((reg32_t *)0x40000004))
+#define WATCHDOG_CTL_R (*((reg32_t *)0x40000008))
+#define WATCHDOG_ICR_R (*((reg32_t *)0x4000000C))
+#define WATCHDOG_RIS_R (*((reg32_t *)0x40000010))
+#define WATCHDOG_MIS_R (*((reg32_t *)0x40000014))
+#define WATCHDOG_TEST_R (*((reg32_t *)0x40000418))
+#define WATCHDOG_LOCK_R (*((reg32_t *)0x40000C00))
+/*\}*/
+
+/**
+ * Deprecated defines for the bit fields in the I2C_O_SICR register.
+ */
+/*\{*/
+#define I2C_SICR_IC 0x00000001 ///< Clear Interrupt
+/*\}*/
+
+/**
+ * Deprecated defines for the bit fields in the I2C_O_SMIS register.
+ */
+/*\{*/
+#define I2C_SMIS_MIS 0x00000001 ///< Masked Interrupt Status
+/*\}*/
+
+/**
+ * Deprecated defines for the bit fields in the I2C_O_SRIS register.
+ */
+/*\{*/
+#define I2C_SRIS_RIS 0x00000001 ///< Raw Interrupt Status
+/*\}*/
+
+/**
+ * Deprecated defines for the bit fields in the I2C_O_SIMR register.
+ */
+/*\{*/
+#define I2C_SIMR_IM 0x00000001 ///< Interrupt Mask
+/*\}*/
+
+/**
+ * Deprecated defines for the bit fields in the the interpretation of the data
+* in the SSFIFOx when the ADC TMLB is enabled. register.
+ */
+/*\{*/
+#define ADC_TMLB_CNT_M 0x000003C0 ///< Continuous Sample Counter
+#define ADC_TMLB_CONT 0x00000020 ///< Continuation Sample Indicator
+#define ADC_TMLB_DIFF 0x00000010 ///< Differential Sample Indicator
+#define ADC_TMLB_TS 0x00000008 ///< Temp Sensor Sample Indicator
+#define ADC_TMLB_MUX_M 0x00000007 ///< Analog Input Indicator
+#define ADC_TMLB_CNT_S 6 ///< Sample counter shift
+#define ADC_TMLB_MUX_S 0 ///< Input channel number shift
+/*\}*/
+
+/**
+ * Deprecated defines for the ADC register offsets.
+ */
+/*\{*/
+#define ADC_ACTSS_R (*((reg32_t *)0x40038000))
+#define ADC_RIS_R (*((reg32_t *)0x40038004))
+#define ADC_IM_R (*((reg32_t *)0x40038008))
+#define ADC_ISC_R (*((reg32_t *)0x4003800C))
+#define ADC_OSTAT_R (*((reg32_t *)0x40038010))
+#define ADC_EMUX_R (*((reg32_t *)0x40038014))
+#define ADC_USTAT_R (*((reg32_t *)0x40038018))
+#define ADC_SSPRI_R (*((reg32_t *)0x40038020))
+#define ADC_PSSI_R (*((reg32_t *)0x40038028))
+#define ADC_SAC_R (*((reg32_t *)0x40038030))
+#define ADC_SSMUX0_R (*((reg32_t *)0x40038040))
+#define ADC_SSCTL0_R (*((reg32_t *)0x40038044))
+#define ADC_SSFIFO0_R (*((reg32_t *)0x40038048))
+#define ADC_SSFSTAT0_R (*((reg32_t *)0x4003804C))
+#define ADC_SSMUX1_R (*((reg32_t *)0x40038060))
+#define ADC_SSCTL1_R (*((reg32_t *)0x40038064))
+#define ADC_SSFIFO1_R (*((reg32_t *)0x40038068))
+#define ADC_SSFSTAT1_R (*((reg32_t *)0x4003806C))
+#define ADC_SSMUX2_R (*((reg32_t *)0x40038080))
+#define ADC_SSCTL2_R (*((reg32_t *)0x40038084))
+#define ADC_SSFIFO2_R (*((reg32_t *)0x40038088))
+#define ADC_SSFSTAT2_R (*((reg32_t *)0x4003808C))
+#define ADC_SSMUX3_R (*((reg32_t *)0x400380A0))
+#define ADC_SSCTL3_R (*((reg32_t *)0x400380A4))
+#define ADC_SSFIFO3_R (*((reg32_t *)0x400380A8))
+#define ADC_SSFSTAT3_R (*((reg32_t *)0x400380AC))
+#define ADC_TMLB_R (*((reg32_t *)0x40038100))
+/*\}*/
+
+/**
+ * Deprecated defines for the bit fields in the FLASH_FMC register.
+ */
+/*\{*/
+#define FLASH_FMC_WRKEY_M 0xFFFF0000 ///< Flash Memory Write Key
+#define FLASH_FMC_WRKEY_S 16
+/*\}*/
+
+/**
+ * Deprecated defines for the bit fields in the SYSCTL_DID1 register.
+ */
+/*\{*/
+#define SYSCTL_DID1_PKG_28SOIC 0x00000000 ///< SOIC package
+#define SYSCTL_DID1_PKG_48QFP 0x00000008 ///< QFP package
+/*\}*/
+
+/**
+ * Deprecated defines for the NVIC register addresses.
+ */
+/*\{*/
+#define NVIC_MPU_R (*((reg32_t *)0xE000ED9C))
+/*\}*/