+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2000 Bernardo Innocenti <bernie@codewiz.org>
+ *
+ * -->
+ *
+ * \brief Triface Bootloader.
+ *
+ * \version $Id$
+ *
+ * \author Stefano Fedrigo <aleph@develer.com>
+ * \author Francesco Sacchi <batt@develer.com>
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+
+#ifndef BOOT_CONFIG_H
+#define BOOT_CONFIG_H
+
+/// Enable watchdog timer.
+#define CONFIG_WATCHDOG 0
+
+/**
+ * Serial port number for kdebug console
+ */
+#define CONFIG_KDEBUG_PORT 1
+
+/**
+ * Serial port baud rate for kdebug console
+ */
+#define CONFIG_KDEBUG_BAUDRATE 115200
+
+/**
+ * printf formatter confguration.
+ *
+ * \sa PRINTF_DISABLED
+ * \sa PRINTF_NOMODIFIERS
+ * \sa PRINTF_REDUCED
+ * \sa PRINTF_NOFLOAT
+ * \sa PRINTF_FULL
+ */
+#undef CONFIG_PRINTF
+#define CONFIG_PRINTF PRINTF_NOMODIFIERS
+
+/**
+ * Bootloader section size.
+ * \note Remember to update this define when changing bootloader size fuses.
+ */
+#define CONFIG_BOOT_SIZE 8192
+
+/**
+ * \name Xmodem parameters
+ * \{
+ */
+#define CONFIG_XMODEM_RECV 1
+#define CONFIG_XMODEM_SEND 0
+#define CONFIG_XMODEM_1KCRC 0
+/* \} */
+
+/**
+ * Multithreading kernel.
+ *
+ * \sa config_kern.h
+ */
+#define CONFIG_KERNEL 0
+
+/**
+ * \name Serial driver parameters
+ * \{
+ */
+ /** [bytes] Size of the outbound FIFO buffer for port 0. */
+ #define CONFIG_UART0_TXBUFSIZE 32
+
+ /** [bytes] Size of the inbound FIFO buffer for port 0. */
+ #define CONFIG_UART0_RXBUFSIZE 64
+
+ /** [bytes] Size of the outbound FIFO buffer for port 1. */
+ #define CONFIG_UART1_TXBUFSIZE 32
+
+ /** [bytes] Size of the inbound FIFO buffer for port 1. */
+ #define CONFIG_UART1_RXBUFSIZE 64
+
+ /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+ #define CONFIG_SPI_TXBUFSIZE 16
+
+ /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+ #define CONFIG_SPI_RXBUFSIZE 32
+
+ /** SPI data order (AVR only). */
+ #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
+
+ /** SPI clock division factor (AVR only). */
+ #define CONFIG_SPI_CLOCK_DIV 16
+
+ /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+ #define CONFIG_SPI_CLOCK_POL 0
+
+ /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+ #define CONFIG_SPI_CLOCK_PHASE 0
+
+ /** Default transmit timeout (ms). Set to -1 to disable timeout support */
+ #define CONFIG_SER_TXTIMEOUT 250
+
+ /** Default receive timeout (ms). Set to -1 to disable timeout support */
+ #define CONFIG_SER_RXTIMEOUT 250
+
+ /** Use RTS/CTS handshake */
+ #define CONFIG_SER_HWHANDSHAKE 0
+
+ /** Default baud rate (set to 0 to disable) */
+ #define CONFIG_SER_DEFBAUDRATE 0
+
+ /** Host Port Baud Rate */
+ #define CONFIG_SER_HOSTPORTBAUDRATE 115200
+
+ /** Host Port */
+ #define CONFIG_SER_HOSTPORT 0
+
+ /** Enable ser_gets() and ser_gets_echo() */
+ #define CONFIG_SER_GETS 1
+
+ /** Enable second serial port in emulator. */
+ #define CONFIG_EMUL_UART1 0
+
+ /**
+ * Transmit always something on serial port 0 TX
+ * to avoid interference when sending burst of data,
+ * using AVR multiprocessor serial mode
+ */
+ #define CONFIG_SER_TXFILL 0
+
+ #define CONFIG_SER_STROBE 0
+/*\}*/
+
+/// Hardware timer selection for drv/timer.c
+#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE0
+
+/// Disable tests
+#define CONFIG_TEST 0
+#endif /* BOOT_CONFIG_H */