--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2007 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Virtual KFile I/O interface.
+ * This module implement a standard fd.seek and a kfile
+ * test function.
+ *
+ * \version $Id$
+ * \author Francesco Sacchi <batt@develer.com>
+ * \author Daniele Basile <asterix@develer.com>
+ *
+ */
+
+#include <kfile.h>
+
+
+#if CONFIG_TEST
+
+/**
+ * Program memory read/write subtest.
+ * Try to write/read in the same \a f file location \a _size bytes.
+ * \return true if all is ok, false otherwise
+ * \note Restore file position at exit (if no error)
+ * \note Test buffer \a buf must be filled with
+ * the following statement:
+ * <pre>
+ * buf[i] = i & 0xff
+ * </pre>
+ */
+static bool kfile_rwTest(KFile *f, uint8_t *buf, size_t _size)
+{
+ int32_t size = _size;
+
+ // Write test buffer
+ if (f->write(f, buf, size) != size)
+ return false;
+ f->seek(f, -size, KSM_SEEK_CUR);
+
+ // Reset test buffer
+ memset(buf, 0, size);
+
+ // Read flash in test buffer
+ if (f->read(f, buf, size) != size)
+ return false;
+ f->seek(f, -size, KSM_SEEK_CUR);
+
+ // Check test result
+ for (size_t i = 0; i < size; i++)
+ if (buf[i] != (i & 0xff))
+ return false;
+
+ return true;
+}
+
+/**
+ * Test for program memory read/write.
+ */
+bool kfile_test(uint8_t *buf, size_t _size , uint8_t *save_buf, size_t * save_buf_size)
+{
+ KFile fd;
+ int32_t size = _size;
+
+ /*
+ * Part of test buf size that you would write.
+ * This var is useded in test 3 to check fd.write
+ * when write outside size limit. Normaly we want
+ * perform a write until is space to write, otherwise
+ * we return.
+ */
+ int32_t len = size/2;
+
+ /*
+ * Fill in test buffer
+ */
+ for (int i = 0; i < size; i++)
+ test_buf[i] = (i & 0xff);
+
+ kprintf("Generated test string..\n");
+
+ /*
+ * Open fd handler
+ */
+ fd.open(&fd, NULL, 0);
+ kprintf("Opened fd handler..\n");
+
+ /*
+ * If necessary, user could save content,
+ * for later restore.
+ */
+ if (save_buf != NULL)
+ {
+ fd.read(&fd, save_buf, save_buf_size);
+ kprintf("Saved content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + save_buf_size);
+ }
+
+ /* TEST 1 BEGIN. */
+ kprintf("Test 1: write from pos 0 to [%lu]\n", fd.size);
+
+ /*
+ * Seek to addr 0
+ */
+ if (fd.seek(&fd, 0, KSM_SEEK_SET) != 0)
+ goto kfile_test_end;
+
+ kprintf("Seek to [%lu], expected[0]\n", fd.seek_pos);
+
+ /*
+ * Test flash read/write to address 0..size
+ */
+ if (!Kfile_rwTest(&fd, test_buf, size))
+ goto kfile_test_end;
+
+ kprintf("Test 1: ok!\n");
+
+ /*
+ * Restore previous read content
+ */
+ if (save_buf != NULL)
+ {
+ fd.seek(&fd, 0, KSM_SEEK_SET);
+
+ if (fd.write(&fd, save_buf, save_buf_size) != size)
+ goto kfile_test_end;
+
+ kprintf("Restore content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + save_buf_size);
+ }
+ /* TEST 1 END. */
+
+ /* TEST 2 BEGIN. */
+ kprintf("Test 2: write from pos [%lu] to [%lu]\n", fd.size/2 , size);
+
+ /*
+ * Go to half test size.
+ */
+ fd.seek(&fd, (fd.size/ 2), KSM_SEEK_SET);
+
+ kprintf("Seek to [%lu], expected[%lu]\n", fd.seek_pos, fd.size/2);
+
+ /*
+ * If necessary, user could save content,
+ * for later restore.
+ */
+ if (save_buf != NULL)
+ {
+ fd.read(&fd, save_buf, save_buf_size);
+ fd.seek(&fd, -size, KSM_SEEK_CUR);
+ kprintf("Saved content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + save_buf_size);
+ }
+
+ /*
+ * Test flash read/write to address FLASHEND/2 ... FLASHEND/2 + size
+ */
+ if (!Kfile_rwTest(&fd, test_buf, size))
+ goto kfile_test_end;
+
+ kprintf("Test 2: ok!\n");
+
+ /*
+ * Restore previous read content
+ */
+ if (save_buf != NULL)
+ {
+ fd.seek(&fd, -size, KSM_SEEK_CUR);
+
+ if (fd.write(&fd, save_buf, save_buf_size) != size)
+ goto kfile_test_end;
+
+ kprintf("Restore content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + save_buf_size);
+ }
+
+ /* TEST 2 END. */
+
+ /* TEST 3 BEGIN. */
+ kprintf("Test 3: write outside of fd.size limit [%lu]\n", fd.size);
+
+ /*
+ * Go to the Flash end
+ */
+ fd.seek(&fd, -len, KSM_SEEK_END);
+ kprintf("Seek to [%lu], expected[%lu]\n", fd.seek_pos, fd.size - len);
+
+ /*
+ * If necessary, user could save content,
+ * for later restore.
+ */
+ if (save_buf != NULL)
+ {
+ ASSERT(len > save_buf_size);
+
+ fd.read(&fd, save_buf, len);
+ fd.seek(&fd, -len, KSM_SEEK_CUR);
+ kprintf("Saved content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + len);
+ }
+
+ /*
+ * Test flash read/write to address (FLASHEND - size) ... FLASHEND
+ */
+ if (!Kfile_rwTest(&fd, test_buf, size))
+ goto kfile_test_end;
+
+ kprintf("Test 3: ok !\n");
+
+ /*
+ * Restore previous read content
+ */
+ if (save_buf != NULL)
+ {
+ fd.seek(&fd, -len, KSM_SEEK_END);
+
+ if (fd.write(&fd, save_buf, len) != len)
+ goto kfile_test_end;
+
+ kprintf("Restore content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + len);
+ }
+
+ /* TEST 3 END. */
+
+ fd.close(&fd);
+ return true;
+
+kfile_test_end:
+ fd.close(&fd);
+ return false;
+}
+
+#endif /* CONFIG_TEST */
\ No newline at end of file