export ETC
CACHE="/var/cache/monkeysphere"
export CACHE
-ERR=0
-export ERR
########################################################################
### UTILITY FUNCTIONS
# 0 = ok, 1 = bad
if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then
log " * acceptable key found."
- echo 0 "$fingerprint"
+ echo "0:${fingerprint}"
else
- echo 1 "$fingerprint"
+ echo "1:${fingerprint}"
fi
;;
'sub') # sub keys
# 0 = ok, 1 = bad
if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then
log " * acceptable key found."
- echo 0 "$fingerprint"
+ echo "0:${fingerprint}"
else
- echo 1 "$fingerprint"
+ echo "1:${fingerprint}"
fi
;;
esac
done
}
-# process hosts in the known_host file
-process_hosts_known_hosts() {
+# process a single host in the known_host file
+process_host_known_hosts() {
local host
local userID
local ok
local keyid
local tmpfile
+ local returnCode
+
+ # default return code is 1, which assumes no key was found
+ returnCode=1
+
+ host="$1"
+
+ log "processing host: $host"
+
+ userID="ssh://${host}"
+
+ for line in $(process_user_id "ssh://${host}") ; do
+ ok=$(echo "$line" | cut -d: -f1)
+ keyid=$(echo "$line" | cut -d: -f2)
+
+ sshKey=$(gpg2ssh "$keyid")
+ # remove the old host key line
+ remove_line "$KNOWN_HOSTS" "$sshKey"
+ # if key OK, add new host line
+ if [ "$ok" -eq '0' ] ; then
+ # hash if specified
+ if [ "$HASH_KNOWN_HOSTS" = 'true' ] ; then
+ # FIXME: this is really hackish cause ssh-keygen won't
+ # hash from stdin to stdout
+ tmpfile=$(mktemp)
+ ssh2known_hosts "$host" "$sshKey" > "$tmpfile"
+ ssh-keygen -H -f "$tmpfile" 2> /dev/null
+ cat "$tmpfile" >> "$KNOWN_HOSTS"
+ rm -f "$tmpfile" "${tmpfile}.old"
+ else
+ ssh2known_hosts "$host" "$sshKey" >> "$KNOWN_HOSTS"
+ fi
+ # set return code to be 0, since a key was found
+ returnCode=0
+ fi
+ return "$returnCode"
+ done
+
+ return "$returnCode"
+}
+
+# update the known_hosts file for a set of hosts listed on command
+# line
+update_known_hosts() {
+ local host
+ local returnCode
+
+ # default return code is 0, which assumes a key was found for
+ # every host. code will be set to 1 if a key is not found for at
+ # least one host
+ returnCode=0
# create a lockfile on known_hosts
lockfile-create "$KNOWN_HOSTS"
for host ; do
- log "processing host: $host"
-
- userID="ssh://${host}"
-
- process_user_id "ssh://${host}" | \
- while read -r ok keyid ; do
- sshKey=$(gpg2ssh "$keyid")
- # remove the old host key line
- remove_line "$KNOWN_HOSTS" "$sshKey"
- # if key OK, add new host line
- if [ "$ok" -eq '0' ] ; then
- # hash if specified
- if [ "$HASH_KNOWN_HOSTS" = 'true' ] ; then
- # FIXME: this is really hackish cause ssh-keygen won't
- # hash from stdin to stdout
- tmpfile=$(mktemp)
- ssh2known_hosts "$host" "$sshKey" > "$tmpfile"
- ssh-keygen -H -f "$tmpfile" 2> /dev/null
- cat "$tmpfile" >> "$KNOWN_HOSTS"
- rm -f "$tmpfile" "${tmpfile}.old"
- else
- ssh2known_hosts "$host" "$sshKey" >> "$KNOWN_HOSTS"
- fi
- fi
- done
+ # process the host, change return code if host key not found
+ process_host_known_hosts "$host" || returnCode=1
+
# touch the lockfile, for good measure.
lockfile-touch --oneshot "$KNOWN_HOSTS"
done
# remove the lockfile
lockfile-remove "$KNOWN_HOSTS"
+
+ return "$returnCode"
+}
+
+# process known_hosts file, going through line-by-line, extract each
+# host, and process with the host processing function
+process_known_hosts() {
+ local returnCode
+
+ # default return code is 0, which assumes a key was found for
+ # every host. code will be set to 1 if a key is not found for at
+ # least one host
+ returnCode=0
+
+ # take all the hosts from the known_hosts file (first field), grep
+ # out all the hashed hosts (lines starting with '|')...
+ for line in $(cat "$KNOWN_HOSTS" | meat | cut -d ' ' -f 1 | grep -v '^|.*$') ; do
+ # break up hosts into separate words
+ update_known_hosts $(echo "$line" | tr , ' ') || returnCode=1
+ done
+
+ return "$returnCode"
}
# process uids for the authorized_keys file
-process_uids_authorized_keys() {
+process_uid_authorized_keys() {
local userID
local ok
local keyid
+ local returnCode
+
+ # default return code is 1, which assumes no key was found
+ returnCode=1
+
+ userID="$1"
+
+ log "processing user ID: $userID"
+
+ for line in $(process_user_id "$userID") ; do
+ ok=$(echo "$line" | cut -d: -f1)
+ keyid=$(echo "$line" | cut -d: -f2)
+
+ sshKey=$(gpg2ssh "$keyid")
+ # remove the old host key line
+ remove_line "$AUTHORIZED_KEYS" "$sshKey"
+ # if key OK, add new host line
+ if [ "$ok" -eq '0' ] ; then
+ ssh2authorized_keys "$userID" "$sshKey" >> "$AUTHORIZED_KEYS"
+
+ # set return code to be 0, since a key was found
+ returnCode=0
+ fi
+ done
+
+ return "$returnCode"
+}
+
+# update the authorized_keys files from a list of user IDs on command
+# line
+update_authorized_keys() {
+ local userID
+ local returnCode
+
+ # default return code is 0, which assumes a key was found for
+ # every user ID. code will be set to 1 if a key is not found for
+ # at least one user ID
+ returnCode=0
# create a lockfile on authorized_keys
lockfile-create "$AUTHORIZED_KEYS"
for userID ; do
- log "processing user ID: $userID"
-
- process_user_id "$userID" | \
- while read -r ok keyid ; do
- sshKey=$(gpg2ssh "$keyid")
- # remove the old host key line
- remove_line "$AUTHORIZED_KEYS" "$sshKey"
- # if key OK, add new host line
- if [ "$ok" -eq '0' ] ; then
- ssh2authorized_keys "$userID" "$sshKey" >> "$AUTHORIZED_KEYS"
- fi
- done
+ # process the user ID, change return code if key not found for
+ # user ID
+ process_uid_authorized_keys "$userID" || returnCode=1
+
# touch the lockfile, for good measure.
lockfile-touch --oneshot "$AUTHORIZED_KEYS"
done
# remove the lockfile
lockfile-remove "$AUTHORIZED_KEYS"
-}
-# process known_hosts file
-# go through line-by-line, extract each host, and process with the
-# host processing function
-process_known_hosts() {
- local hosts
- local host
-
- # take all the hosts from the known_hosts file (first field),
- # grep out all the hashed hosts (lines starting with '|')...
- cat "$KNOWN_HOSTS" | meat | \
- cut -d ' ' -f 1 | grep -v '^|.*$' | \
- while IFS=, read -r -a hosts ; do
- process_hosts_known_hosts ${hosts[@]}
- done
+ return "$returnCode"
}
# process an authorized_user_ids file for authorized_keys
process_authorized_user_ids() {
local userid
+ local returnCode
+
+ # default return code is 0, and is set to 1 if a key for a user ID
+ # is not found
+ returnCode=0
authorizedUserIDs="$1"
- cat "$authorizedUserIDs" | meat | \
- while read -r userid ; do
- process_uids_authorized_keys "$userid"
+ # set the IFS to be newline for parsing the authorized_user_ids
+ # file. can't find it in BASH(1) (found it on the net), but it
+ # works.
+ IFS=$'\n'
+ for userid in $(cat "$authorizedUserIDs" | meat) ; do
+ update_authorized_keys "$userid" || returnCode=1
done
+
+ return "$returnCode"
}
# EXPERIMENTAL (unused) process userids found in authorized_keys file
process_authorized_keys() {
local authorizedKeys
local userID
+ local returnCode
+
+ # default return code is 0, and is set to 1 if a key for a user
+ # is not found
+ returnCode=0
authorizedKeys="$1"
# process the userid
log "processing userid: '$userID'"
- process_user_id "$userID" > /dev/null
+ process_user_id "$userID" > /dev/null || returnCode=1
done
+
+ return "$returnCode"
}
##################################################
# retrieve key from web of trust, and set owner trust to "full"
# if key is found.
trust_key() {
+ local keyID
+ local trustLevel
+
+ keyID="$1"
+ trustLevel="$2"
+
+ if [ -z "$keyID" ] ; then
+ failure "You must specify key to trust."
+ fi
+
# get the key from the key server
if ! gpg --keyserver "$KEYSERVER" --recv-key "$keyID" ; then
failure "Could not retrieve key '$keyID'."
# get key fingerprint
fingerprint=$(get_key_fingerprint "$keyID")
+ echo "key found:"
+ gpg --fingerprint "$fingerprint"
+
+ while [ -z "$trustLevel" ] ; do
+ cat <<EOF
+Please decide how far you trust this user to correctly verify other users' keys
+(by looking at passports, checking fingerprints from different sources, etc.)
+
+ 1 = I don't know or won't say
+ 2 = I do NOT trust
+ 3 = I trust marginally
+ 4 = I trust fully
+ 5 = I trust ultimately
+
+EOF
+ read -p "Your decision? " trustLevel
+ if echo "$trustLevel" | grep -v "[1-5]" ; then
+ echo "Unknown trust level '$trustLevel'."
+ unset trustLevel
+ elif [ "$trustLevel" = 'q' ] ; then
+ failure "Aborting."
+ fi
+ done
+
# attach a "non-exportable" signature to the key
# this is required for the key to have any validity at all
# the 'y's on stdin indicates "yes, i really want to sign"
- echo -e 'y\ny' | gpg --lsign-key --command-fd 0 "$fingerprint"
+ echo -e 'y\ny' | gpg --quiet --lsign-key --command-fd 0 "$fingerprint"
+
+ # index trustLevel by one to difference between level in ui and level
+ # internally
+ trustLevel=$((trustLevel+1))
- # import "full" trust for fingerprint into gpg
- echo ${fingerprint}:5: | gpg --import-ownertrust
+ # import new owner trust level for key
+ echo "${fingerprint}:${trustLevel}:" | gpg --import-ownertrust
if [ $? = 0 ] ; then
log "Owner trust updated."
else
projects / monkeysphere.git / commitdiff