CONFIG_SER_HWHANDSHAKE fixes.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@360 38d2e660-2303-0410-9eaa-f027e97ec537

diff --git a/drv/ser_avr.c b/drv/ser_avr.c
index aa239de4af9f038426fca84fccfbcc7b0c25c013..05c93943cb020c223f263fbee8c1dd639ea5a41e 100755 (executable)
--- a/drv/ser_avr.c
+++ b/drv/ser_avr.c
@@ -38,6 +38,9 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.25  2005/01/25 08:37:26  bernie
+ *#* CONFIG_SER_HWHANDSHAKE fixes.
+ *#*
  *#* Revision 1.24  2005/01/14 00:49:16  aleph
  *#* Rename callbacks; SerialHardwareVT.txSending: New callback; Add SPI_BUS macros.
  *#*
@@ -119,23 +122,17 @@
 #include <avr/io.h>
 
 
-/*!
- * \name Hardware handshake (RTS/CTS).
- * \{
- */
-#ifndef RTS_ON
-#define RTS_ON      do {} while (0)
-#endif
-#ifndef RTS_OFF
-#define RTS_OFF     do {} while (0)
-#endif
-#ifndef IS_CTS_ON
-#define IS_CTS_ON   true
-#endif
-#ifndef EIMSKB_CTS
-#define EIMSKB_CTS  0 /*!< Dummy value, must be overridden */
+#if !CONFIG_SER_HWHANDSHAKE
+       /*!
+        * \name Hardware handshake (RTS/CTS).
+        * \{
+        */
+       #define RTS_ON      do {} while (0)
+       #define RTS_OFF     do {} while (0)
+       #define IS_CTS_ON   true
+       #define EIMSKF_CTS  0 /*!< Dummy value, must be overridden */
+       /*\}*/
 #endif
-/*\}*/
 
 
 /*!
@@ -436,7 +433,7 @@ static void uart0_setbaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned
        /* Compute baud-rate period */
        uint16_t period = (((CLOCK_FREQ / 16UL) + (rate / 2)) / rate) - 1;
 
-#ifndef __AVR_ATmega103__
+#if !CPU_AVR_ATMEGA103
        UBRR0H = (period) >> 8;
 #endif
        UBRR0L = (period);
@@ -673,7 +670,7 @@ SIGNAL(SIG_CTS)
 {
        // Re-enable UDR empty interrupt and TX, then disable CTS interrupt
        UCSR0B = BV(RXCIE) | BV(UDRIE) | BV(RXEN) | BV(TXEN);
-       cbi(EIMSK, EIMSKB_CTS);
+       EIMSK &= ~EIMSKF_CTS;
 }
 
 #endif // CONFIG_SER_HWHANDSHAKE
@@ -701,8 +698,8 @@ SIGNAL(SIG_UART0_DATA)
                // Disable rx interrupt and tx, enable CTS interrupt
                // UNTESTED
                UCSR0B = BV(RXCIE) | BV(RXEN) | BV(TXEN);
-               sbi(EIFR, EIMSKB_CTS);
-               sbi(EIMSK, EIMSKB_CTS);
+               EIFR |= EIMSKF_CTS;
+               EIMSK |= EIMSKF_CTS;
        }
 #endif
        else
@@ -772,8 +769,8 @@ SIGNAL(SIG_UART1_DATA)
                // Disable rx interrupt and tx, enable CTS interrupt
                // UNTESTED
                UCSR1B = BV(RXCIE) | BV(RXEN) | BV(TXEN);
-               sbi(EIFR, EIMSKB_CTS);
-               sbi(EIMSK, EIMSKB_CTS);
+               EIFR |= EIMSKF_CTS;
+               EIMSK |= EIMSKF_CTS;
        }
 #endif
        else