+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Configuration file for GFX module.
- *
- * \author Daniele Basile <asterix@develer.com>
- */
-
-#ifndef CFG_GFX_H
-#define CFG_GFX_H
-
-/**
- * Enable line clipping algorithm.
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_GFX_CLIPPING 1
-
-/**
- * Enable text rendering in bitmaps.
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_GFX_TEXT 1
-
-/**
- * Enable virtual coordinate system.
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_GFX_VCOORDS 1
-
-/**
- * Select bitmap pixel format.
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "bitmap_format"
- */
-#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB
-
-#endif /* CFG_GFX_H */
-
+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Configuration file for Menu module.
- *
- * \author Daniele Basile <asterix@develer.com>
- */
-
-#ifndef CFG_MENU_H
-#define CFG_MENU_H
-
-/**
- * Enable button bar behind menus
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_MENU_MENUBAR 0
-
-/**
- * Level Edit Timeout
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_LEVELEDIT_TIMEOUT 0
-
-/**
- * Menu timeout
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_MENU_TIMEOUT 0
-
-/**
- * Enable smooth scrolling in menus
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_MENU_SMOOTH 1
-
-
-#endif /* CFG_MENU_H */
-
+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Configuration file for GFX module.
- *
- * \author Daniele Basile <asterix@develer.com>
- */
-
-#ifndef CFG_GFX_H
-#define CFG_GFX_H
-
-/**
- * Enable line clipping algorithm.
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_GFX_CLIPPING 1
-
-/**
- * Enable text rendering in bitmaps.
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_GFX_TEXT 1
-
-/**
- * Enable virtual coordinate system.
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_GFX_VCOORDS 1
-
-/**
- * Select bitmap pixel format.
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "bitmap_format"
- */
-#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB
-
-#endif /* CFG_GFX_H */
-
+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Configuration file for Menu module.
- *
- * \author Daniele Basile <asterix@develer.com>
- */
-
-#ifndef CFG_MENU_H
-#define CFG_MENU_H
-
-/**
- * Enable button bar behind menus
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_MENU_MENUBAR 0
-
-/**
- * Level Edit Timeout
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_LEVELEDIT_TIMEOUT 0
-
-/**
- * Menu timeout
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_MENU_TIMEOUT 0
-
-/**
- * Enable smooth scrolling in menus
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_MENU_SMOOTH 1
-
-
-#endif /* CFG_MENU_H */
-
+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
- *
- * -->
- *
- * \brief LM3S1986: OLED-RIT-128x96 (P14201) low-level hardware macros
- *
- * \author Andrea Righi <arighi@develer.com>
- */
-
-#ifndef HW_RIT128x96_H
-#define HW_RIT128x96_H
-
-#include "cfg/macros.h" /* BV() */
-#include "cfg/debug.h"
-
-#include <cpu/attr.h>
-#include <cpu/irq.h>
-#include <cpu/types.h>
-
-#include <drv/clock_lm3s.h>
-#include <drv/ssi_lm3s.h>
-#include <drv/gpio_lm3s.h>
-
-/**
- * \name LCD I/O pins/ports
- * @{
- */
-/* OLED Data/Command control pin */
-#define GPIO_OLEDDC_PIN BV(2)
-
-/* OLED enable pin */
-#define GPIO_OLEDEN_PIN BV(3)
-/*@}*/
-
-/**
- * \name LCD bus control macros
- * @{
- */
-/* Enter command mode */
-#define LCD_SET_COMMAND() \
- lm3s_gpioPinWrite(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN, 0)
-
-/* Enter data mode */
-#define LCD_SET_DATA() \
- lm3s_gpioPinWrite(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN, GPIO_OLEDDC_PIN)
-
-/* Send data to the display */
-#define LCD_WRITE(x) \
- { \
- uint32_t _x; \
- while (!lm3s_ssiWriteFrameNonBlocking(SSI0_BASE, x)); \
- /* Dummy read to drain the FIFO */ \
- while (!lm3s_ssiReadFrameNonBlocking(SSI0_BASE, &_x)); \
- }
-/*@}*/
-
-INLINE void lcd_rit128x96_hw_bus_init(void)
-{
- uint32_t dummy;
-
- /* Enable the peripheral clock */
- SYSCTL_RCGC1_R |= SYSCTL_RCGC1_SSI0;
- SYSCTL_RCGC2_R |= SYSCTL_RCGC2_GPIOA;
- SYSCTL_RCGC2_R |= SYSCTL_RCGC2_GPIOH;
- lm3s_busyWait(512);
-
- /* Configure the SSI0CLK and SSIOTX pins for SSI operation. */
- lm3s_gpioPinConfig(GPIO_PORTA_BASE, BV(2) | BV(3) | BV(5),
- GPIO_DIR_MODE_HW, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD_WPU);
- /*
- * Configure the GPIO port pin used as a D/C# signal (data/command
- * control) for OLED device, and the port pin used to enable power to
- * the OLED panel.
- */
- lm3s_gpioPinConfig(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN | GPIO_OLEDEN_PIN,
- GPIO_DIR_MODE_OUT, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD);
- lm3s_gpioPinWrite(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN | GPIO_OLEDEN_PIN,
- GPIO_OLEDDC_PIN | GPIO_OLEDEN_PIN);
-
- /* Configure the SSI0 port for master mode */
- lm3s_ssiOpen(SSI0_BASE, SSI_FRF_MOTO_MODE_2,
- SSI_MODE_MASTER, CPU_FREQ / 2, 8);
- /*
- * Configure the GPIO port pin used as a D/Cn signal for OLED device,
- * and the port pin used to enable power to the OLED panel.
- */
- lm3s_gpioPinConfig(GPIO_PORTA_BASE, GPIO_OLEDEN_PIN,
- GPIO_DIR_MODE_HW, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD_WPU);
-
- /* Drain the SSI RX FIFO */
- while (lm3s_ssiReadFrameNonBlocking(SSI0_BASE, &dummy));
-}
-
-#endif /* HW_RIT128x96_H */
projects / bertos.git / commitdiff