+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- *
- * -->
- *
- * \brief DevLib configuration options
- *
- * You should copy this header in your project and rename it to
- * "config.h" and delete the CONFIG_ macros for the modules
- * you're not using.
- *
- * <h2>Working with multiple applications</h2>
- *
- * If your project is made of multiple DevLib-based applications,
- * create a custom "config.h" file in each application subdirectory
- * and play with the compiler include path to get the desired result.
- * You can share common options by creationg a "config_common.h" header
- * and including it from all your "config.h" copies.
- *
- * <h2>Configuration style</h2>
- *
- * For improved compile-time checking of configuration options,
- * the preferred way to use a \c CONFIG_ symbol is keeping it
- * always defined with a value of either 0 or 1. This lets
- * you write tests like this:
- *
- * \code
- * #if CONFIG_FOO
- * void foo(void)
- * {
- * if (CONFIG_BAR)
- * bar();
- * }
- * #endif // CONFIG_FOO
- * \endcode
- *
- * In most cases, we rely on the optimizer to discard checks
- * on constant values and performing dead-code elimination.
- *
- * \version $Id$
- * \author Bernardo Innocenti <bernie@develer.com>
- * \author Stefano Fedrigo <aleph@develer.com>
- */
-
-/*#*
- *#* $Log$
- *#* Revision 1.16 2007/02/12 15:29:41 asterix
- *#* Add CONFIG_RANDPOOL_TIMER macro to swich on or off timer support in randpool.
- *#*
- *#* Revision 1.15 2007/02/08 14:20:35 asterix
- *#* Add CONFIG_SIZE_ENTROPY_POOL.
- *#*
- *#* Revision 1.14 2007/02/06 11:37:26 asterix
- *#* Add CONFIG_MD2_STD_PERM for use standard permutation in MD2.
- *#*
- *#* Revision 1.13 2007/01/31 13:49:40 asterix
- *#* Add config size block for MD2
- *#*
- *#* Revision 1.3 2006/09/13 18:29:22 bernie
- *#* Add a few missing CONFIG_ definitions.
- *#*
- *#* Revision 1.2 2006/07/19 12:56:24 bernie
- *#* Convert to new Doxygen style.
- *#*
- *#* Revision 1.1 2006/05/18 00:40:43 bernie
- *#* Rename appconfig.h to appconfig_common.h.
- *#*
- *#* Revision 1.11 2006/04/11 00:08:53 bernie
- *#* Add smooth scrolling for menus.
- *#*
- *#* Revision 1.10 2006/03/22 09:48:51 bernie
- *#* Add a few more config options.
- *#*
- *#* Revision 1.9 2006/02/24 00:27:35 bernie
- *#* Enable kernel and fix Doxygen markup.
- *#*
- *#* Revision 1.8 2006/02/21 16:06:05 bernie
- *#* Update copyright info.
- *#*
- *#* Revision 1.7 2006/02/17 22:28:19 bernie
- *#* Add missing UART definitions.
- *#*
- *#* Revision 1.6 2006/02/15 09:12:56 bernie
- *#* Switch to BITMAP_FMT_PLANAR_V_LSB.
- *#*
- *#* Revision 1.5 2006/02/10 12:34:33 bernie
- *#* Add missing config options for gfx and kbd.
- *#*
- *#* Revision 1.4 2006/01/23 23:12:27 bernie
- *#* Enable CONFIG_GFX_VCOORDS.
- *#*
- *#* Revision 1.3 2006/01/17 02:30:06 bernie
- *#* Add new config vars.
- *#*
- *#* Revision 1.2 2005/11/27 03:04:57 bernie
- *#* CONFIG_WATCHDOG: New config option.
- *#*
- *#* Revision 1.1 2005/11/04 17:42:12 bernie
- *#* Move cfg/config.h to appconfig.h.
- *#*/
-
-#ifndef APPCONFIG_H
-#define APPCONFIG_H
-
-/** Baud-rate for the kdebug console */
-#define CONFIG_KDEBUG_BAUDRATE 19200
-
-/**
- * printf()-style formatter configuration.
- *
- * \sa PRINTF_DISABLED
- * \sa PRINTF_NOMODIFIERS
- * \sa PRINTF_REDUCED
- * \sa PRINTF_NOFLOAT
- * \sa PRINTF_FULL
- */
-#define CONFIG_PRINTF PRINTF_FULL
-
-/**
- * Multithreading kernel.
- *
- * \sa config_kern.h
- */
-#define CONFIG_KERNEL 1
-
-/**
- * \name Serial driver parameters
- * \{
- */
- /** [bytes] Size of the outbound FIFO buffer for port 0. */
- #define CONFIG_UART0_TXBUFSIZE 32
-
- /** [bytes] Size of the inbound FIFO buffer for port 0. */
- #define CONFIG_UART0_RXBUFSIZE 64
-
- /** [bytes] Size of the outbound FIFO buffer for port 1. */
- #define CONFIG_UART1_TXBUFSIZE 32
-
- /** [bytes] Size of the inbound FIFO buffer for port 1. */
- #define CONFIG_UART1_RXBUFSIZE 64
-
- /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
- #define CONFIG_SPI_TXBUFSIZE 16
-
- /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
- #define CONFIG_SPI_RXBUFSIZE 32
-
- /** SPI data order (AVR only). */
- #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
-
- /** SPI clock division factor (AVR only). */
- #define CONFIG_SPI_CLOCK_DIV 16
-
- /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
- #define CONFIG_SPI_CLOCK_POL 0
-
- /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
- #define CONFIG_SPI_CLOCK_PHASE 0
-
- /** Default transmit timeout (ms). Set to -1 to disable timeout support */
- #define CONFIG_SER_TXTIMEOUT -1
-
- /** Default receive timeout (ms). Set to -1 to disable timeout support */
- #define CONFIG_SER_RXTIMEOUT -1
-
- /** Use RTS/CTS handshake */
- #define CONFIG_SER_HWHANDSHAKE 0
-
- /** Default baud rate (set to 0 to disable) */
- #define CONFIG_SER_DEFBAUDRATE 0
-
- /** Enable ser_gets() and ser_gets_echo() */
- #define CONFIG_SER_GETS 0
-
- /** Enable second serial port in emulator. */
- #define CONFIG_EMUL_UART1 0
-
- /**
- * Transmit always something on serial port 0 TX
- * to avoid interference when sending burst of data,
- * using AVR multiprocessor serial mode
- */
- #define CONFIG_SER_TXFILL 0
-
- #define CONFIG_SER_STROBE 0
-/*\}*/
-
-/// Hardware timer selection for drv/timer.c
-#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2
-
-/// Debug timer interrupt using a strobe pin.
-#define CONFIG_TIMER_STROBE 0
-
-/// Enable ADS strobe.
-#define CONFIG_ADC_STROBE 0
-
-/// Enable watchdog timer.
-#define CONFIG_WATCHDOG 1
-
-/// EEPROM type for drv/eeprom.c
-#define CONFIG_EEPROM_TYPE EEPROM_24XX256
-
-/// Select bitmap pixel format.
-#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB
-
-/// Enable line clipping algorithm.
-#define CONFIG_GFX_CLIPPING 1
-
-/// Enable text rendering in bitmaps.
-#define CONFIG_GFX_TEXT 1
-
-/// Enable virtual coordinate system.
-#define CONFIG_GFX_VCOORDS 1
-
-/// Keyboard polling method
-#define CONFIG_KBD_POLL KBD_POLL_SOFTINT
-
-/// Enable keyboard event delivery to observers
-#define CONFIG_KBD_OBSERVER 0
-
-/// Enable key beeps
-#define CONFIG_KBD_BEEP 1
-
-/// Enable long pression handler for keys
-#define CONFIG_KBD_LONGPRESS 1
-
-/**
- * \name Type for the chart dataset
- * \{
- */
-#define CONFIG_CHART_TYPE_X uint8_t
-#define CONFIG_CHART_TYPE_Y uint8_t
-/*\}*/
-
-/// Enable button bar behind menus
-#define CONFIG_MENU_MENUBAR 0
-
-/// Enable smooth scrolling in menus
-#define CONFIG_MENU_SMOOTH 1
-
-/// Size of block for MD2 algorithm.
-#define CONFIG_MD2_BLOCK_LEN 16
-
-/// Use standard permutation in MD2 algorithm.
-#define CONFIG_MD2_STD_PERM 0
-
-/// Define a size, in byte, of entropy pool.
-#define CONFIG_SIZE_ENTROPY_POOL 64
-
-/// Turn on or off timer support in Randpool.
-#define CONFIG_RANDPOOL_TIMER 1
-
-#endif /* APPCONFIG_H */
* \author Stefano Fedrigo <aleph@develer.com>
*/
-/*#*
- *#* $Log$
- *#* Revision 1.4 2007/09/18 10:16:59 batt
- *#* Merge from triface.
- *#*
- *#* Revision 1.3 2006/09/13 18:29:22 bernie
- *#* Add a few missing CONFIG_ definitions.
- *#*
- *#* Revision 1.2 2006/07/19 12:56:24 bernie
- *#* Convert to new Doxygen style.
- *#*
- *#* Revision 1.1 2006/05/18 00:40:43 bernie
- *#* Rename appconfig.h to appconfig_common.h.
- *#*
- *#* Revision 1.11 2006/04/11 00:08:53 bernie
- *#* Add smooth scrolling for menus.
- *#*
- *#* Revision 1.10 2006/03/22 09:48:51 bernie
- *#* Add a few more config options.
- *#*
- *#* Revision 1.9 2006/02/24 00:27:35 bernie
- *#* Enable kernel and fix Doxygen markup.
- *#*
- *#* Revision 1.8 2006/02/21 16:06:05 bernie
- *#* Update copyright info.
- *#*
- *#* Revision 1.7 2006/02/17 22:28:19 bernie
- *#* Add missing UART definitions.
- *#*
- *#* Revision 1.6 2006/02/15 09:12:56 bernie
- *#* Switch to BITMAP_FMT_PLANAR_V_LSB.
- *#*
- *#* Revision 1.5 2006/02/10 12:34:33 bernie
- *#* Add missing config options for gfx and kbd.
- *#*
- *#* Revision 1.4 2006/01/23 23:12:27 bernie
- *#* Enable CONFIG_GFX_VCOORDS.
- *#*
- *#* Revision 1.3 2006/01/17 02:30:06 bernie
- *#* Add new config vars.
- *#*
- *#* Revision 1.2 2005/11/27 03:04:57 bernie
- *#* CONFIG_WATCHDOG: New config option.
- *#*
- *#* Revision 1.1 2005/11/04 17:42:12 bernie
- *#* Move cfg/config.h to appconfig.h.
- *#*/
-
#ifndef APPCONFIG_COMMON_H
#define APPCONFIG_COMMON_H
#define CONFIG_ADC_STROBE 0
/// Enable watchdog timer.
-#define CONFIG_WATCHDOG 1
+#define CONFIG_WATCHDOG 0
/// EEPROM type for drv/eeprom.c
#define CONFIG_EEPROM_TYPE EEPROM_24XX256
/// Enable smooth scrolling in menus
#define CONFIG_MENU_SMOOTH 1
-#endif /* APPCONFIG_COMMON_H */
+/// Size of block for MD2 algorithm.
+#define CONFIG_MD2_BLOCK_LEN 16
+
+/// Use standard permutation in MD2 algorithm.
+#define CONFIG_MD2_STD_PERM 0
+
+/// Define a size, in byte, of entropy pool.
+#define CONFIG_SIZE_ENTROPY_POOL 64
+
+/// Turn on or off timer support in Randpool.
+#define CONFIG_RANDPOOL_TIMER 1
+
+#endif /* APPCONFIG_H */