Add template configuration file.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@88 38d2e660-2303-0410-9eaa-f027e97ec537

diff --git a/config_template.h b/config_template.h
new file mode 100755 (executable)
index 0000000..7b3867e
--- /dev/null
+++ b/config_template.h
@@ -0,0 +1,129 @@
+/*!
+ * \file
+ * <!--
+ * Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief DevLib configuration options
+ *
+ * You should copy this header in your project and rename it to
+ * "config.h" and delete the CONFIG_ macros for the modules
+ * you're not using.
+ *
+ * \para Working with multiple applications
+ *
+ * If your project is made of multiple DevLib-based applications,
+ * create a custom "config.h" file in each application subdirectory
+ * and play with the compiler include path to get the desired result.
+ * You can share common options by creationg a "config_common.h" header
+ * and including it from all your "config.h" copies.
+ *
+ * \para Configuration style
+ *
+ * For improved compile-time checking of configuration options,
+ * the preferred way to use a \c CONFIG_ symbol is keeping it
+ * always defined with a value of either 0 or 1.  This lets
+ * you write tests like this:
+ *
+ * \code
+ *  #if CONFIG_FOO
+ *  void foo(void)
+ *  {
+ *      if (CONFIG_BAR)
+ *          bar();
+ *  }
+ *  #endif // CONFIG_FOO
+ * \endcode
+ *
+ * In most cases, we rely on the optimizer to discard checks
+ * on constant values and performing dead-code elimination.
+ *
+ * \version $Id$
+ * \author Bernardo Innocenti <bernie@develer.com>
+ * \author Stefano Fedrigo <aleph@develer.com>
+ */
+
+/*
+ * $Log$
+ * Revision 1.1  2004/07/29 23:34:32  bernie
+ * Add template configuration file.
+ *
+ */
+
+#ifndef CONFIG_COMMON_H
+#define CONFIG_COMMON_H
+
+/*! Baud-rate for the kdebug console */
+#define CONFIG_KDEBUG_BAUDRATE  19200
+
+/*!
+ * printf()-style formatter configuration.
+ *
+ * \sa PRINTF_DISABLED
+ * \sa PRINTF_NOMODIFIERS
+ * \sa PRINTF_REDUCED
+ * \sa PRINTF_NOFLOAT
+ * \sa PRINTF_FULL
+ */
+#define CONFIG_PRINTF PRINTF_FULL
+
+/*!
+ * Multithreading kernel
+ *
+ * /sa config_kernel.h
+ */
+#define CONFIG_KERNEL 0
+
+/*!
+ * \name Serial driver parameters
+ * \{
+ */
+       /*! Size of the outbound FIFO buffer for all ports (bytes) */
+       #define CONFIG_SER_TXBUFSIZE  32
+       /*! Size of the inbound FIFO buffer for all ports (bytes) */
+       #define CONFIG_SER_RXBUFSIZE  64
+
+       /*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+       #define CONFIG_SER_TXTIMEOUT    -1
+       /*! Default receive timeout (ms). Set to -1 to disable timeout support */
+       #define CONFIG_SER_RXTIMEOUT    -1
+
+       /*! Use RTS/CTS handshake */
+       #define CONFIG_SER_HWHANDSHAKE   0
+
+       /*! Default baud rate (set to 0 to disable) */
+       #define CONFIG_SER_DEFBAUDRATE   0
+
+       /*! Enable ser_gets() and ser_gets_echo() */
+       #define CONFIG_SER_GETS          0
+
+       /*!
+        * Transmit always something on serial port 0 TX
+        * to avoid interference when sending burst of data,
+        * using AVR multiprocessor serial mode
+        */
+       #define CONFIG_SER_TXFILL        0
+/*\}*/
+
+/*!
+ * \name KBus configuration
+ * \{
+ */
+       /*! Board address for KBus */
+       #define CONFIG_KBUS_ADDR KBUS_ADDR_FOOBAR
+
+       /*! Disable KBUS escaping support */
+       #define CONFIG_KBUS_ESCAPE  0
+
+       /*! Serial port for internal KBUS communication */
+       #define CONFIG_KBUS_PORT  0
+
+       /*! Serial port speed for KBus communication */
+       #define CONFIG_KBUS_BAUDRATE  19200
+/*\}*/
+
+//! EEPROM type for drv/eeprom.c
+#define CONFIG_EEPROM_TYPE EEPROM_24XX256
+
+#endif /* CONFIG_COMMON_H */