--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2007 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Function library for serial Flash memory.
+ *
+ * Module provide a kfile interface, that ensure an abstraction
+ * from comunication channel and give a standard interface.
+ * Typicaly this kind of memory use an SPI bus, but you should
+ * use another comunication channel you have defined.
+ *
+ * \version $Id$
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#include <avr/io.h>
+
+#include <cfg/macros.h>
+#include <cfg/debug.h>
+
+#include <drv/timer.h>
+#include <drv/flash25.h>
+
+#if CONFIG_KERNEL
+#include <kern/proc.h>
+#endif
+
+/*
+ * We use a spi bus, thus include hardware specific definition.
+ * If you use another channel you must redefine this macros.
+ */
+#include "hw_spi.h"
+
+#include <appconfig.h>
+
+/**
+ * Global definition of channel handler (usually SPI).
+ */
+static KFile *channel;
+
+/**
+ * Wait until flash memory is ready.
+ */
+static void flash25_waitReady(void)
+{
+ uint8_t stat;
+
+ while (1)
+ {
+ CS_ENABLE();
+
+ kfile_putc(FLASH25_RDSR, channel);
+ stat = kfile_getc(channel);
+
+ CS_DISABLE();
+
+ if (!(stat & RDY_BIT))
+ break;
+ #if CONFIG_KERNEL
+ else
+ proc_switch();
+ #endif
+ }
+}
+
+/**
+ * Send a single command to serial flash memory.
+ */
+static void flash25_sendCmd(Flash25Opcode cmd)
+{
+ CS_ENABLE();
+
+ kfile_putc(cmd, channel);
+
+ CS_DISABLE();
+}
+
+/**
+ * flash25 init function.
+ * This function init a comunication channel and
+ * try to read manufacturer id of serial memory,
+ * then check if is equal to selected type.
+ */
+static bool flash25_pin_init(void)
+{
+ uint8_t device_id;
+ uint8_t manufacturer;
+
+ SPI_HW_INIT();
+
+ CS_ENABLE();
+ /*
+ * Send read id productor opcode on
+ * comunication channel
+ * TODO:controllare se ha senso
+ */
+ kfile_putc(FLASH25_RDID, channel);
+
+ manufacturer = kfile_getc(channel);
+ device_id = kfile_getc(channel);
+
+ CS_DISABLE();
+
+ if((FLASH25_MANUFACTURER_ID == manufacturer) &&
+ (FLASH25_DEVICE_ID == device_id))
+ return true;
+ else
+ return false;
+}
+
+/**
+ * Reopen a serial memory interface.
+ *
+ * For serial memory this function reinit only
+ * the size and seek_pos in kfile stucture.
+ * Return a kfile pointer, after assert check.
+ */
+static KFile * flash25_reopen(struct KFile *fd)
+{
+ KFILE_ASSERT_GENERIC(fd);
+
+ fd->seek_pos = 0;
+ fd->size = FLASH25_MEM_SIZE;
+
+ kprintf("flash25 file opened\n");
+ return fd;
+}
+
+/**
+ * Close a serial memory interface.
+ *
+ * For serial memory this funtion do nothing,
+ * and return always 0.
+ */
+static int flash25_close(UNUSED_ARG(struct KFile *,fd))
+{
+ kprintf("flash25 file closed\n");
+ return 0;
+}
+
+/**
+ * Read \a _buf lenght \a size byte from serial flash memmory.
+ *
+ * For read in serial flash memory we
+ * enble cs pin and send one byte of read opcode,
+ * and then 3 byte of address of memory cell we
+ * want to read. After the last byte of address we
+ * can read data from so pin.
+ *
+ * \return the number of bytes read.
+ */
+static size_t flash25_read(struct KFile *fd, void *buf, size_t size)
+{
+ uint8_t *data = (uint8_t *)buf;
+
+ KFILE_ASSERT_GENERIC(fd);
+
+ ASSERT(fd->seek_pos + size <= fd->size);
+ size = MIN((uint32_t)size, fd->size - fd->seek_pos);
+
+ //kprintf("Reading at addr[%lu], size[%d]\n", fd->seek_pos, size);
+ CS_ENABLE();
+
+ kfile_putc(FLASH25_READ, channel);
+
+
+ /*
+ * Address that we want to read.
+ */
+ kfile_putc((fd->seek_pos >> 16) & 0xFF, channel);
+ kfile_putc((fd->seek_pos >> 8) & 0xFF, channel);
+ kfile_putc(fd->seek_pos & 0xFF, channel);
+
+ kfile_read(channel, data, size);
+
+ CS_DISABLE();
+
+ fd->seek_pos += size;
+
+ return size;
+}
+
+/**
+ * Write \a _buf in serial flash memory
+ *
+ * Before to write data into flash we must enable
+ * memory writing. To do this we send a WRE command opcode.
+ * After this command the flash is ready to be write, and so
+ * we send a PROGRAM opcode followed to 3 byte of
+ * address memory, at the end of last address byte
+ * we can send the data.
+ * When we finish to send all data, we disable cs
+ * and flash write received data bytes on its memory.
+ *
+ * \note: WARNING: you could write only on erased memory section!
+ * Each write time you could write max a memory page size,
+ * because if you write more than memory page size the
+ * address roll over to first byte of page.
+ *
+ * \return the number of bytes write.
+ */
+static size_t flash25_write(struct KFile *fd, const void *_buf, size_t size)
+{
+ flash25Offset_t offset;
+ flash25Size_t total_write = 0;
+ flash25Size_t wr_len;
+ const uint8_t *data = (const uint8_t *) _buf;
+
+ KFILE_ASSERT_GENERIC(fd);
+ ASSERT(fd->seek_pos + size <= fd->size);
+
+ size = MIN((flash25Size_t)size, fd->size - fd->seek_pos);
+
+ while (size)
+ {
+ offset = fd->seek_pos % (flash25Size_t)FLASH25_PAGE_SIZE;
+ wr_len = MIN((flash25Size_t)size, FLASH25_PAGE_SIZE - (flash25Size_t)offset);
+
+ kprintf("[seek_pos-<%lu>, offset-<%d>]\n", fd->seek_pos, offset);
+
+ /*
+ * We check serial flash memory state, and wait until ready-flag
+ * is high.
+ */
+ flash25_waitReady();
+
+ /*
+ * Start write cycle.
+ * We could write only data not more long than one
+ * page size.
+ *
+ * To write on serial flash memory we must first
+ * enable write with a WREN opcode command, before
+ * the PROGRAM opcode.
+ *
+ * \note: the same byte cannot be reprogrammed without
+ * erasing the whole sector first.
+ */
+ flash25_sendCmd(FLASH25_WREN);
+
+ CS_ENABLE();
+ kfile_putc(FLASH25_PROGRAM, channel);
+
+ /*
+ * Address that we want to write.
+ */
+ kfile_putc((fd->seek_pos >> 16) & 0xFF, channel);
+ kfile_putc((fd->seek_pos >> 8) & 0xFF, channel);
+ kfile_putc(fd->seek_pos & 0xFF, channel);
+
+ kfile_write(channel, data, wr_len);
+
+ CS_DISABLE();
+
+ data += wr_len;
+ fd->seek_pos += wr_len;
+ size -= wr_len;
+ total_write += wr_len;
+ }
+
+ kprintf("written %u bytes\n", total_write);
+ return total_write;
+}
+
+/**
+ * Sector erase function.
+ *
+ * Erase a select \p sector of serial flash memory.
+ *
+ * \Note A sector size is FLASH25_SECTOR_SIZE.
+ * This operation could take a while.
+ */
+void flash25_sectorErase(Flash25Sector sector)
+{
+
+ /*
+ * Erase a sector could take a while,
+ * for debug we measure that time
+ * see datasheet to compare this time.
+ */
+ DB(ticks_t start_time = timer_clock());
+
+ CS_ENABLE();
+
+ /*
+ * To erase a sector of serial flash memory we must first
+ * enable write with a WREN opcode command, before
+ * the SECTOR_ERASE opcode. Sector is automatically
+ * determinate if any address within the sector
+ * is selected.
+ */
+ kfile_putc(FLASH25_WREN, channel);
+ kfile_putc(FLASH25_SECTORE_ERASE, channel);
+
+ /*
+ * Address inside the sector that we want to
+ * erase.
+ */
+ kfile_putc(sector, channel);
+
+ CS_DISABLE();
+
+ /*
+ * We check serial flash memory state, and wait until ready-flag
+ * is hight.
+ */
+ flash25_waitReady();
+
+ DB(kprintf("Erased sector [%d] in %d ms\n", sector, ticks_to_ms(timer_clock() - start_time)));
+
+}
+
+/**
+ * Chip erase function.
+ *
+ * Erase all sector of serial flash memory.
+ *
+ * \Note This operation could take a while.
+ */
+void flash25_chipErase(void)
+{
+ /*
+ * Erase all chip could take a while,
+ * for debug we measure that time
+ * see datasheet to compare this time.
+ */
+ DB(ticks_t start_time = timer_clock());
+
+ /*
+ * To erase serial flash memory we must first
+ * enable write with a WREN opcode command, before
+ * the CHIP_ERASE opcode.
+ */
+ flash25_sendCmd(FLASH25_WREN);
+ flash25_sendCmd(FLASH25_CHIP_ERASE);
+
+ /*
+ * We check serial flash memory state, and wait until ready-flag
+ * is high.
+ */
+ flash25_waitReady();
+
+ DB(kprintf("Erased all memory in %d ms\n", ticks_to_ms(timer_clock() - start_time)));
+
+}
+
+/**
+ * Init data flash memory interface.
+ */
+void flash25_init(struct KFile *fd, struct KFile *_channel)
+{
+ //Set kfile struct type as a generic kfile structure.
+ DB(fd->_type = KFT_GENERIC);
+
+ // Set up data flash programming functions.
+ fd->reopen = flash25_reopen;
+ fd->close = flash25_close;
+ fd->read = flash25_read;
+ fd->write = flash25_write;
+ fd->seek = kfile_genericSeek;
+
+ /*
+ * Init a local channel structure and flash kfile interface.
+ */
+ channel = _channel;
+ flash25_reopen(fd);
+
+ /*
+ * Init data flash memory and micro pin.
+ */
+ if (!flash25_pin_init())
+ ASSERT(0);
+}
+
+#if CONFIG_TEST
+
+/**
+ * Test function for flash25.
+ *
+ * \note: This implentation use a SPI channel.
+ */
+bool flash25_test(KFile *channel)
+{
+ KFile fd;
+ uint8_t test_buf[256];
+
+ /*
+ * Init a spi kfile interface and
+ * flash driver.
+ */
+ flash25_init(&fd, channel);
+
+ kprintf("Init serial flash\n");
+
+ flash25_chipErase();
+
+ flash25_sectorErase(FLASH25_SECT1);
+ flash25_sectorErase(FLASH25_SECT2);
+ flash25_sectorErase(FLASH25_SECT3);
+ flash25_sectorErase(FLASH25_SECT4);
+
+ /*
+ * Launche a kfile test interface.
+ */
+ kprintf("Kfile test start..\n");
+ if (!kfile_test(&fd, test_buf, NULL, sizeof(test_buf)))
+ return false;
+
+ return true;
+}
+#endif /* CONFIG_TEST */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2007 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Function library for serial Flash memory.
+ *
+ *
+ * \version $Id$
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+
+#ifndef DRV_FLASH25_H
+#define DRV_FLASH25_H
+
+#include <kern/kfile.h>
+#include <cfg/compiler.h>
+
+
+#include <appconfig.h>
+
+/**
+ * Type definition for serial flash memory.
+ */
+typedef uint32_t flash25Addr_t;
+typedef uint32_t flash25Size_t;
+typedef uint8_t flash25Offset_t;
+
+
+/**
+ * Memory definition.
+ *
+ * \note Below are defined valid serial flash memory support to
+ * this drive. Every time we call flash25_init() function we check
+ * if memory defined are right (see flash25.c form more detail).
+ * \{
+ */
+#define FLASH25_AT25F2048 1
+
+#if CONFIG_FLASH25 == FLASH25_AT25F2048
+ #define FLASH25_MANUFACTURER_ID 0x1F // ATMEL
+ #define FLASH25_DEVICE_ID 0x63 // Device ID
+ #define FLASH25_PAGE_SIZE 256 // Page size in byte
+ #define FLASH25_NUM_SECTOR 4 // Number of section in serial memory
+ #define FLASH25_SECTOR_SIZE 65536UL // Section size in byte
+ #define FLASH25_MEM_SIZE FLASH25_NUM_SECTOR * FLASH25_SECTOR_SIZE
+ #define FLASH25_NUM_PAGE FLASH25_MEM_SIZE / FLASH25_PAGE_SIZE
+#elif
+ #error Nothing memory defined in CONFIG_FLASH25 are support.
+#endif
+
+#define RDY_BIT 0x1 // Statuts of write cycle
+/* \} */
+
+/**
+ * Serial flash opcode commands.
+ */
+typedef enum {
+ FLASH25_WREN = 0x6, ///< Set write enable latch
+ FLASH25_WRDI = 0x4, ///< Reset enable write latch
+ FLASH25_RDSR = 0x5, ///< Read status register
+ FLASH25_WRSR = 0x1, ///< Write status register
+ FLASH25_READ = 0x3, ///< Read data from memory array
+ FLASH25_PROGRAM = 0x2, ///< Program data into memory array
+ FLASH25_SECTORE_ERASE = 0x52, ///< Erase one sector in memory array
+ FLASH25_CHIP_ERASE = 0x62, ///< Erase all sector in memory array
+ FLASH25_RDID = 0x15 ///< Read Manufacturer and product ID
+} Flash25Opcode;
+
+/**
+ * Serial flash sector memory address.
+ */
+#if CONFIG_FLASH25 != FLASH25_AT25F2048
+ #error Nothing memory defined in CONFIG_FLASH25 are support.
+#endif
+
+typedef enum {
+ FLASH25_SECT1 = 0x0, ///< Sector 1 (0x0 -0xFFFF)
+ FLASH25_SECT2 = 0x10000, ///< Sector 2 (0x10000 -0x1FFFF)
+ FLASH25_SECT3 = 0x20000, ///< Sector 3 (0x20000 -0x2FFFF)
+ FLASH25_SECT4 = 0x30000, ///< Sector 4 (0x30000 -0x3FFFF)
+} Flash25Sector;
+
+void flash25_init(struct KFile *fd, struct KFile *_channel);
+void flash25_chipErase(void);
+void flash25_sectorErase(Flash25Sector sector);
+bool flash25_test(KFile *channel);
+
+#endif /* DRV_FLASH25_H */
+