*/
#define CONFIG_ADC_STROBE 0
+
+/**
+ * Start up timer[s] = startup value / ADCClock [Hz]
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3_adc_sut"
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_SUT ADC_SUT512
+
+/**
+ * Analog Settling Time[s] = settling value / ADCClock[Hz]
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3_adc_stt"
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_STTLING ADC_AST17
+
+/**
+ * Tracking Time[s] = (TRACKTIM + 1) / ADCClock[Hz]
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_TRACKTIM 0
+
+/**
+ * Transfer Period[s] = (TRANSFER * 2 + 3) ADCClock[Hz]
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_TRANSFER 1
+
#endif /* CFG_ADC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for DAC module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_DAC_H
+#define CFG_DAC_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define DAC_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define DAC_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * DAC Refresh Period = 1024*REFRESH/DACC Clock
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "sam3x"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 65536
+ */
+#define CONFIG_DAC_REFRESH 16
+
+/**
+ * DAC Startup Time Selection.
+ * see datasheet table.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "sam3x"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 63
+ */
+#define CONFIG_DAC_STARTUP 0
+
+/**
+ * DAC Trigger Selection.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3x_dac_tc"
+ * $WIZ$ supports = "sam3x"
+ */
+#define CONFIG_DAC_TIMER DACC_TRGSEL_TIO_CH0
+
+#endif /* CFG_DAC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the Eeprom module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_EEPROM_H
+#define CFG_EEPROM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define EEPROM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define EEPROM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Check this to disable Eeprom deprecated API support.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_EEPROM_DISABLE_OLD_API 0
+
+#endif /* CFG_EEPROM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the generic ethernet driver module
+ */
+
+#ifndef CFG_ETH_H
+#define CFG_ETH_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define ETH_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define ETH_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_ETH_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the HTTP module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_HTTP_H
+#define CFG_HTTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define HTTP_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define HTTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+/**
+ * Default start page to load
+ *
+ * $WIZ$ type = "str"
+ */
+#define HTTP_DEFAULT_PAGE "index.htm"
+
+#endif /* CFG_HTTP_H */
*
*
* \author Luca Ottaviano <lottaviano@develer.com>
+ * \author Daniele Basile <asterix@develer.com>
*/
#ifndef CFG_I2S_H
#define CFG_I2S_H
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define I2S_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define I2S_LOG_FORMAT LOG_FMT_TERSE
+
/**
* Length of each play buffer.
*
#define CONFIG_SAMPLE_FREQ 44100UL
/**
- * Module logging level.
+ * Sample bits per channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_level"
+ * $WIZ$ type = "int"
+ * * $WIZ$ min = 8
+ * $WIZ$ max = 32
*/
-#define I2S_LOG_LEVEL LOG_LVL_INFO
+#define CONFIG_WORD_BIT_SIZE 16
/**
- * Module logging format.
+ * Number of channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_format"
+ * $WIZ$ type = "int"
*/
-#define I2S_LOG_FORMAT LOG_FMT_TERSE
+#define CONFIG_CHANNEL_NUM 2
+
+/**
+ * Size of trasmit start delay
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 255
+ */
+#define CONFIG_DELAY 0
+
+/**
+ * Generate frame sync every 2 x CONFIG_PERIOD bits (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 512
+ */
+#define CONFIG_PERIOD 15
+
+/**
+ * Number of words transmitted in frame
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 16
+ */
+#define CONFIG_WORD_PER_FRAME 1
+
+/**
+ * Size of Synchro data register (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_FRAME_SYNC_SIZE 15
+
+
+/**
+ * Extra Size of Synchro data register (CONFIG_FRAME_SYNC_SIZE + CONFIG_EXTRA_FRAME_SYNC_SIZE * 16 + 1) (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_EXTRA_FRAME_SYNC_SIZE 0
#endif /* CFG_I2S_H */
*/
#define CONFIG_INI_MAX_LINE_LEN 64
+/**
+ * Make case insensitive comparisons.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_INI_CASE_INSENSITIVE 0
+
#endif /* CFG_INI_READER_H */
--- /dev/null
+/**
+ * \file cfg_led_7seg.h
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \brief Configuration file for led 7 segment display.
+ *
+ * \author Fabio Bizzi <fbizzi@bizzi.org>
+ *
+ * \addtogroup SevenSegDisplay 7 Segments LED Displays Driver
+ * \{
+ *
+ */
+
+#ifndef CFG_LED_7SEG_H
+#define CFG_LED_7SEG_H
+
+/**
+ * Use a Common Cathode display.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_LED_7SEG_CCAT 0
+
+/**
+ * Number of digit present in the LED display.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ * $WIZ$ max = 8
+ */
+#define CONFIG_LED_7SEG_DIGIT 4
+
+/**
+ * Max lenght of the string to be displayed.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 16
+ * $WIZ$ max = 255
+ */
+#define CONFIG_LED_7SEG_STRLEN 255
+
+/**
+ * Default scrolling speed (ms * CONFIG_LED_7SEG_RTIME).
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_LED_7SEG_SSPEED 10
+
+/**
+ * Default refresh time (ms).
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_LED_7SEG_RTIME 5
+
+#endif /* CFG_LED_7SEG_H */
+ /** \} */ //defgroup drivers
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the lwIP TCP/IP stack module
+ */
+
+/*
+ * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+#ifndef CFG_LWIP_H
+#define CFG_LWIP_H
+
+/*
+ -----------------------------------------------
+ ---------- Platform specific locking ----------
+ -----------------------------------------------
+*/
+
+/**
+ * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
+ * critical regions during buffer allocation, deallocation and memory
+ * allocation and deallocation.
+ */
+#ifndef SYS_LIGHTWEIGHT_PROT
+#define SYS_LIGHTWEIGHT_PROT 1
+#endif
+
+/**
+ * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
+ * use lwIP facilities.
+ */
+#ifndef NO_SYS
+#define NO_SYS 0
+#endif
+
+/**
+ * MEMCPY: override this if you have a faster implementation at hand than the
+ * one included in your C library
+ */
+#ifndef MEMCPY
+#define MEMCPY(dst,src,len) memcpy(dst,src,len)
+#endif
+
+/**
+ * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
+ * call to memcpy() if the length is known at compile time and is small.
+ */
+#ifndef SMEMCPY
+#define SMEMCPY(dst,src,len) memcpy(dst,src,len)
+#endif
+
+/*
+ ------------------------------------
+ ---------- Memory options ----------
+ ------------------------------------
+*/
+/**
+ * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
+ * instead of the lwip internal allocator. Can save code size if you
+ * already use it.
+ */
+#ifndef MEM_LIBC_MALLOC
+#define MEM_LIBC_MALLOC 0
+#endif
+
+/**
+ * Use mem_malloc/mem_free instead of the lwip pool allocator.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#ifndef MEMP_MEM_MALLOC
+#define MEMP_MEM_MALLOC 0
+#endif
+
+/**
+ * MEM_ALIGNMENT: should be set to the alignment of the CPU
+ * \verbatim
+ * 4 byte alignment -> #define MEM_ALIGNMENT 4
+ * 2 byte alignment -> #define MEM_ALIGNMENT 2
+ * \endverbatim
+ */
+#ifndef MEM_ALIGNMENT
+#define MEM_ALIGNMENT 4
+#endif
+
+/**
+ * The size of the lwIP heap memory.
+ *
+ * If the application will send a lot of data that needs to be copied, this
+ * should be set high.
+ *
+ * $WIZ$ type = "int"; min = 1600
+ */
+#define MEM_SIZE 1600
+
+/**
+ * Dynamic pool memory overflow protection check level.
+ *
+ * MEMP_OVERFLOW_CHECK == 0 no checking
+ * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed
+ * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time
+ * memp_malloc() or memp_free() is called (useful but slow!)
+ *
+ * $WIZ$ type = "int"; min = "0"; max = "2"
+ */
+#define MEMP_OVERFLOW_CHECK 0
+
+/**
+ * Run a sanity check after each memp_free().
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define MEMP_SANITY_CHECK 0
+
+/**
+ * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set
+ * of memory pools of various sizes. When mem_malloc is called, an element of
+ * the smallest pool that can provide the length needed is returned.
+ * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled.
+ */
+#ifndef MEM_USE_POOLS
+#define MEM_USE_POOLS 0
+#endif
+
+/**
+ * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next
+ * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more
+ * reliable. */
+#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL
+#define MEM_USE_POOLS_TRY_BIGGER_POOL 0
+#endif
+
+/**
+ * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h
+ * that defines additional pools beyond the "standard" ones required
+ * by lwIP. If you set this to 1, you must have lwippools.h in your
+ * inlude path somewhere.
+ */
+#ifndef MEMP_USE_CUSTOM_POOLS
+#define MEMP_USE_CUSTOM_POOLS 0
+#endif
+
+/**
+ * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from
+ * interrupt context (or another context that doesn't allow waiting for a
+ * semaphore).
+ * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT,
+ * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs
+ * with each loop so that mem_free can run.
+ *
+ * ATTENTION: As you can see from the above description, this leads to dis-/
+ * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc
+ * can need longer.
+ *
+ * If you don't want that, at least for NO_SYS=0, you can still use the following
+ * functions to enqueue a deallocation call which then runs in the tcpip_thread
+ * context:
+ * - pbuf_free_callback(p);
+ * - mem_free_callback(m);
+ */
+#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT
+#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0
+#endif
+
+/*
+ ------------------------------------------------
+ ---------- Internal Memory Pool Sizes ----------
+ ------------------------------------------------
+*/
+/**
+ * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
+ * If the application sends a lot of data out of ROM (or other static memory),
+ * this should be set high.
+ */
+#ifndef MEMP_NUM_PBUF
+#define MEMP_NUM_PBUF 16
+#endif
+
+/**
+ * MEMP_NUM_RAW_PCB: Number of raw connection PCBs
+ * (requires the LWIP_RAW option)
+ */
+#ifndef MEMP_NUM_RAW_PCB
+#define MEMP_NUM_RAW_PCB 4
+#endif
+
+/**
+ * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
+ * per active UDP "connection".
+ * (requires the LWIP_UDP option)
+ */
+#ifndef MEMP_NUM_UDP_PCB
+#define MEMP_NUM_UDP_PCB 4
+#endif
+
+/**
+ * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_PCB
+#define MEMP_NUM_TCP_PCB 5
+#endif
+
+/**
+ * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_PCB_LISTEN
+#define MEMP_NUM_TCP_PCB_LISTEN 8
+#endif
+
+/**
+ * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_SEG
+#define MEMP_NUM_TCP_SEG 16
+#endif
+
+/**
+ * MEMP_NUM_REASSDATA: the number of simultaneously IP packets queued for
+ * reassembly (whole packets, not fragments!)
+ */
+#ifndef MEMP_NUM_REASSDATA
+#define MEMP_NUM_REASSDATA 5
+#endif
+
+/**
+ * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing
+ * packets (pbufs) that are waiting for an ARP request (to resolve
+ * their destination address) to finish.
+ * (requires the ARP_QUEUEING option)
+ */
+#ifndef MEMP_NUM_ARP_QUEUE
+#define MEMP_NUM_ARP_QUEUE 30
+#endif
+
+/**
+ * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces
+ * can be members et the same time (one per netif - allsystems group -, plus one
+ * per netif membership).
+ * (requires the LWIP_IGMP option)
+ */
+#ifndef MEMP_NUM_IGMP_GROUP
+#define MEMP_NUM_IGMP_GROUP 8
+#endif
+
+/**
+ * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
+ * (requires NO_SYS==0)
+ */
+#ifndef MEMP_NUM_SYS_TIMEOUT
+#define MEMP_NUM_SYS_TIMEOUT 8
+#endif
+
+/**
+ * MEMP_NUM_NETBUF: the number of struct netbufs.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#ifndef MEMP_NUM_NETBUF
+#define MEMP_NUM_NETBUF 2
+#endif
+
+/**
+ * MEMP_NUM_NETCONN: the number of struct netconns.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#ifndef MEMP_NUM_NETCONN
+#define MEMP_NUM_NETCONN 4
+#endif
+
+/**
+ * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used
+ * for callback/timeout API communication.
+ * (only needed if you use tcpip.c)
+ */
+#ifndef MEMP_NUM_TCPIP_MSG_API
+#define MEMP_NUM_TCPIP_MSG_API 8
+#endif
+
+/**
+ * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used
+ * for incoming packets.
+ * (only needed if you use tcpip.c)
+ */
+#ifndef MEMP_NUM_TCPIP_MSG_INPKT
+#define MEMP_NUM_TCPIP_MSG_INPKT 8
+#endif
+
+/**
+ * PBUF_POOL_SIZE: the number of buffers in the pbuf pool.
+ */
+#ifndef PBUF_POOL_SIZE
+#define PBUF_POOL_SIZE 16
+#endif
+
+/*
+ ---------------------------------
+ ---------- ARP options ----------
+ ---------------------------------
+*/
+/**
+ * LWIP_ARP==1: Enable ARP functionality.
+ */
+#ifndef LWIP_ARP
+#define LWIP_ARP 1
+#endif
+
+/**
+ * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached.
+ */
+#ifndef ARP_TABLE_SIZE
+#define ARP_TABLE_SIZE 10
+#endif
+
+/**
+ * ARP_QUEUEING==1: Outgoing packets are queued during hardware address
+ * resolution.
+ */
+#ifndef ARP_QUEUEING
+#define ARP_QUEUEING 1
+#endif
+
+/**
+ * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be
+ * updated with the source MAC and IP addresses supplied in the packet.
+ * You may want to disable this if you do not trust LAN peers to have the
+ * correct addresses, or as a limited approach to attempt to handle
+ * spoofing. If disabled, lwIP will need to make a new ARP request if
+ * the peer is not already in the ARP table, adding a little latency.
+ */
+#ifndef ETHARP_TRUST_IP_MAC
+#define ETHARP_TRUST_IP_MAC 1
+#endif
+
+/**
+ * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header.
+ * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check.
+ * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted.
+ * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted.
+ */
+#ifndef ETHARP_SUPPORT_VLAN
+#define ETHARP_SUPPORT_VLAN 0
+#endif
+
+/*
+ --------------------------------
+ ---------- IP options ----------
+ --------------------------------
+*/
+/**
+ * IP_FORWARD==1: Enables the ability to forward IP packets across network
+ * interfaces. If you are going to run lwIP on a device with only one network
+ * interface, define this to 0.
+ */
+#ifndef IP_FORWARD
+#define IP_FORWARD 0
+#endif
+
+/**
+ * IP_OPTIONS_ALLOWED: Defines the behavior for IP options.
+ * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped.
+ * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed).
+ */
+#ifndef IP_OPTIONS_ALLOWED
+#define IP_OPTIONS_ALLOWED 1
+#endif
+
+/**
+ * Reassemble incoming fragmented IP packets.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define IP_REASSEMBLY 1
+
+/**
+ * Fragment outgoing IP packets if their size exceeds MTU.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define IP_FRAG 1
+
+/**
+ * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
+ * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
+ * in this time, the whole packet is discarded.
+ */
+#ifndef IP_REASS_MAXAGE
+#define IP_REASS_MAXAGE 3
+#endif
+
+/**
+ * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
+ * Since the received pbufs are enqueued, be sure to configure
+ * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
+ * packets even if the maximum amount of fragments is enqueued for reassembly!
+ */
+#ifndef IP_REASS_MAX_PBUFS
+#define IP_REASS_MAX_PBUFS 10
+#endif
+
+/**
+ * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP
+ * fragmentation. Otherwise pbufs are allocated and reference the original
+ * packet data to be fragmented.
+ */
+#ifndef IP_FRAG_USES_STATIC_BUF
+#define IP_FRAG_USES_STATIC_BUF 1
+#endif
+
+/**
+ * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer
+ * (requires IP_FRAG_USES_STATIC_BUF==1)
+ */
+#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU)
+#define IP_FRAG_MAX_MTU 1500
+#endif
+
+/**
+ * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.
+ */
+#ifndef IP_DEFAULT_TTL
+#define IP_DEFAULT_TTL 255
+#endif
+
+/**
+ * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast
+ * filter per pcb on udp and raw send operations. To enable broadcast filter
+ * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1.
+ */
+#ifndef IP_SOF_BROADCAST
+#define IP_SOF_BROADCAST 0
+#endif
+
+/**
+ * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast
+ * filter on recv operations.
+ */
+#ifndef IP_SOF_BROADCAST_RECV
+#define IP_SOF_BROADCAST_RECV 0
+#endif
+
+/*
+ ----------------------------------
+ ---------- ICMP options ----------
+ ----------------------------------
+*/
+/**
+ * Enable ICMP module inside the IP stack.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_ICMP 1
+
+/**
+ * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
+ */
+#ifndef ICMP_TTL
+#define ICMP_TTL (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only)
+ */
+#ifndef LWIP_BROADCAST_PING
+#define LWIP_BROADCAST_PING 0
+#endif
+
+/**
+ * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only)
+ */
+#ifndef LWIP_MULTICAST_PING
+#define LWIP_MULTICAST_PING 0
+#endif
+
+/*
+ ---------------------------------
+ ---------- RAW options ----------
+ ---------------------------------
+*/
+/**
+ * Enable application layer to hook into the IP layer itself.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_RAW 1
+
+/**
+ * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
+ */
+#ifndef RAW_TTL
+#define RAW_TTL (IP_DEFAULT_TTL)
+#endif
+
+/*
+ ----------------------------------
+ ---------- DHCP options ----------
+ ----------------------------------
+*/
+/**
+ * Enable DHCP module. UDP must be also available.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_DHCP 1
+
+/**
+ * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
+ */
+#ifndef DHCP_DOES_ARP_CHECK
+#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP))
+#endif
+
+/*
+ ------------------------------------
+ ---------- AUTOIP options ----------
+ ------------------------------------
+*/
+/**
+ * LWIP_AUTOIP==1: Enable AUTOIP module.
+ */
+#ifndef LWIP_AUTOIP
+#define LWIP_AUTOIP 0
+#endif
+
+/**
+ * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
+ * the same interface at the same time.
+ */
+#ifndef LWIP_DHCP_AUTOIP_COOP
+#define LWIP_DHCP_AUTOIP_COOP 0
+#endif
+
+/**
+ * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
+ * that should be sent before falling back on AUTOIP. This can be set
+ * as low as 1 to get an AutoIP address very quickly, but you should
+ * be prepared to handle a changing IP address when DHCP overrides
+ * AutoIP.
+ */
+#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES
+#define LWIP_DHCP_AUTOIP_COOP_TRIES 9
+#endif
+
+/*
+ ----------------------------------
+ ---------- SNMP options ----------
+ ----------------------------------
+*/
+/**
+ * Turn on SNMP module. UDP must be also available.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_SNMP 0
+
+/**
+ * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will
+ * allow. At least one request buffer is required.
+ */
+#ifndef SNMP_CONCURRENT_REQUESTS
+#define SNMP_CONCURRENT_REQUESTS 1
+#endif
+
+/**
+ * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap
+ * destination is required
+ */
+#ifndef SNMP_TRAP_DESTINATIONS
+#define SNMP_TRAP_DESTINATIONS 1
+#endif
+
+/**
+ * SNMP_PRIVATE_MIB:
+ */
+#ifndef SNMP_PRIVATE_MIB
+#define SNMP_PRIVATE_MIB 0
+#endif
+
+/**
+ * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not
+ * a safe action and disabled when SNMP_SAFE_REQUESTS = 1).
+ * Unsafe requests are disabled by default!
+ */
+#ifndef SNMP_SAFE_REQUESTS
+#define SNMP_SAFE_REQUESTS 1
+#endif
+
+/*
+ ----------------------------------
+ ---------- IGMP options ----------
+ ----------------------------------
+*/
+/**
+ * Turn on IGMP module.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_IGMP 0
+
+/*
+ ----------------------------------
+ ---------- DNS options -----------
+ ----------------------------------
+*/
+/**
+ * Turn on DNS module. UDP must be available for DNS transport.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_DNS 0
+
+/** DNS maximum number of entries to maintain locally. */
+#ifndef DNS_TABLE_SIZE
+#define DNS_TABLE_SIZE 4
+#endif
+
+/** DNS maximum host name length supported in the name table. */
+#ifndef DNS_MAX_NAME_LENGTH
+#define DNS_MAX_NAME_LENGTH 256
+#endif
+
+/** The maximum of DNS servers */
+#ifndef DNS_MAX_SERVERS
+#define DNS_MAX_SERVERS 2
+#endif
+
+/** DNS do a name checking between the query and the response. */
+#ifndef DNS_DOES_NAME_CHECK
+#define DNS_DOES_NAME_CHECK 1
+#endif
+
+/** DNS use a local buffer if DNS_USES_STATIC_BUF=0, a static one if
+ DNS_USES_STATIC_BUF=1, or a dynamic one if DNS_USES_STATIC_BUF=2.
+ The buffer will be of size DNS_MSG_SIZE */
+#ifndef DNS_USES_STATIC_BUF
+#define DNS_USES_STATIC_BUF 1
+#endif
+
+/** DNS message max. size. Default value is RFC compliant. */
+#ifndef DNS_MSG_SIZE
+#define DNS_MSG_SIZE 512
+#endif
+
+/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled,
+ * you have to define
+ * \code
+ * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}}
+ * \endcode
+ * (an array of structs name/address, where address is an u32_t in network
+ * byte order).
+ *
+ * Instead, you can also use an external function:
+ * \code
+ * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name)
+ * \endcode
+ * that returns the IP address or INADDR_NONE if not found.
+ */
+#ifndef DNS_LOCAL_HOSTLIST
+#define DNS_LOCAL_HOSTLIST 0
+#endif /* DNS_LOCAL_HOSTLIST */
+
+/** If this is turned on, the local host-list can be dynamically changed
+ * at runtime. */
+#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC
+#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0
+#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */
+
+/*
+ ---------------------------------
+ ---------- UDP options ----------
+ ---------------------------------
+*/
+/**
+ * Turn on UDP.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_UDP 1
+
+/**
+ * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)
+ */
+#ifndef LWIP_UDPLITE
+#define LWIP_UDPLITE 0
+#endif
+
+/**
+ * UDP_TTL: Default Time-To-Live value.
+ */
+#ifndef UDP_TTL
+#define UDP_TTL (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf.
+ */
+#ifndef LWIP_NETBUF_RECVINFO
+#define LWIP_NETBUF_RECVINFO 0
+#endif
+
+/*
+ ---------------------------------
+ ---------- TCP options ----------
+ ---------------------------------
+*/
+/**
+ * Turn on TCP.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_TCP 1
+
+/**
+ * TCP_TTL: Default Time-To-Live value.
+ */
+#ifndef TCP_TTL
+#define TCP_TTL (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * TCP_WND: The size of a TCP window. This must be at least
+ * (2 * TCP_MSS) for things to work well
+ */
+#ifndef TCP_WND
+#define TCP_WND (4 * TCP_MSS)
+#endif
+
+/**
+ * TCP_MAXRTX: Maximum number of retransmissions of data segments.
+ */
+#ifndef TCP_MAXRTX
+#define TCP_MAXRTX 12
+#endif
+
+/**
+ * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
+ */
+#ifndef TCP_SYNMAXRTX
+#define TCP_SYNMAXRTX 6
+#endif
+
+/**
+ * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
+ * Define to 0 if your device is low on memory.
+ */
+#ifndef TCP_QUEUE_OOSEQ
+#define TCP_QUEUE_OOSEQ (LWIP_TCP)
+#endif
+
+/**
+ * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default,
+ * you might want to increase this.)
+ * For the receive side, this MSS is advertised to the remote side
+ * when opening a connection. For the transmit size, this MSS sets
+ * an upper limit on the MSS advertised by the remote host.
+ */
+#ifndef TCP_MSS
+#define TCP_MSS 536
+#endif
+
+/**
+ * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really
+ * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which
+ * reflects the available reassembly buffer size at the remote host) and the
+ * largest size permitted by the IP layer" (RFC 1122)
+ * Setting this to 1 enables code that checks TCP_MSS against the MTU of the
+ * netif used for a connection and limits the MSS if it would be too big otherwise.
+ */
+#ifndef TCP_CALCULATE_EFF_SEND_MSS
+#define TCP_CALCULATE_EFF_SEND_MSS 1
+#endif
+
+
+/**
+ * TCP_SND_BUF: TCP sender buffer space (bytes).
+ */
+#ifndef TCP_SND_BUF
+#define TCP_SND_BUF (2 * TCP_MSS)
+#endif
+
+/**
+ * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
+ * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work.
+ */
+#ifndef TCP_SND_QUEUELEN
+#define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF)/(TCP_MSS))
+#endif
+
+/**
+ * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than or equal
+ * to TCP_SND_BUF. It is the amount of space which must be available in the
+ * TCP snd_buf for select to return writable.
+ */
+#ifndef TCP_SNDLOWAT
+#define TCP_SNDLOWAT ((TCP_SND_BUF)/2)
+#endif
+
+/**
+ * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
+ */
+#ifndef TCP_LISTEN_BACKLOG
+#define TCP_LISTEN_BACKLOG 0
+#endif
+
+/**
+ * The maximum allowed backlog for TCP listen netconns.
+ * This backlog is used unless another is explicitly specified.
+ * 0xff is the maximum (u8_t).
+ */
+#ifndef TCP_DEFAULT_LISTEN_BACKLOG
+#define TCP_DEFAULT_LISTEN_BACKLOG 0xff
+#endif
+
+/**
+ * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option.
+ */
+#ifndef LWIP_TCP_TIMESTAMPS
+#define LWIP_TCP_TIMESTAMPS 0
+#endif
+
+/**
+ * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an
+ * explicit window update
+ */
+#ifndef TCP_WND_UPDATE_THRESHOLD
+#define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4)
+#endif
+
+/*
+ ----------------------------------
+ ---------- Pbuf options ----------
+ ----------------------------------
+*/
+/**
+ * PBUF_LINK_HLEN: the number of bytes that should be allocated for a
+ * link level header. The default is 14, the standard value for
+ * Ethernet.
+ */
+#ifndef PBUF_LINK_HLEN
+#define PBUF_LINK_HLEN 14
+#endif
+
+/**
+ * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is
+ * designed to accomodate single full size TCP frame in one pbuf, including
+ * TCP_MSS, IP header, and link header.
+ */
+#ifndef PBUF_POOL_BUFSIZE
+#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN)
+#endif
+
+/*
+ ------------------------------------------------
+ ---------- Network Interfaces options ----------
+ ------------------------------------------------
+*/
+/**
+ * Use DHCP_OPTION_HOSTNAME with netif's hostname field.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_NETIF_HOSTNAME 1
+
+/**
+ * Support netif api (in netifapi.c)
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_NETIF_API 0
+
+/**
+ * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface
+ * changes its up/down status (i.e., due to DHCP IP acquistion)
+ */
+#ifndef LWIP_NETIF_STATUS_CALLBACK
+#define LWIP_NETIF_STATUS_CALLBACK 0
+#endif
+
+/**
+ * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
+ * whenever the link changes (i.e., link down)
+ */
+#ifndef LWIP_NETIF_LINK_CALLBACK
+#define LWIP_NETIF_LINK_CALLBACK 0
+#endif
+
+/**
+ * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table
+ * indices) in struct netif. TCP and UDP can make use of this to prevent
+ * scanning the ARP table for every sent packet. While this is faster for big
+ * ARP tables or many concurrent connections, it might be counterproductive
+ * if you have a tiny ARP table or if there never are concurrent connections.
+ */
+#ifndef LWIP_NETIF_HWADDRHINT
+#define LWIP_NETIF_HWADDRHINT 0
+#endif
+
+/**
+ * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
+ * address equal to the netif IP address, looping them back up the stack.
+ */
+#ifndef LWIP_NETIF_LOOPBACK
+#define LWIP_NETIF_LOOPBACK 0
+#endif
+
+/**
+ * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
+ * sending for each netif (0 = disabled)
+ */
+#ifndef LWIP_LOOPBACK_MAX_PBUFS
+#define LWIP_LOOPBACK_MAX_PBUFS 0
+#endif
+
+/**
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in
+ * the system, as netifs must change how they behave depending on this setting
+ * for the LWIP_NETIF_LOOPBACK option to work.
+ * Setting this is needed to avoid reentering non-reentrant functions like
+ * tcp_input().
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a
+ * multithreaded environment like tcpip.c. In this case, netif->input()
+ * is called directly.
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup.
+ * The packets are put on a list and netif_poll() must be called in
+ * the main application loop.
+ */
+#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING
+#define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS)
+#endif
+
+/**
+ * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
+ * to be sent into one single pbuf. This is for compatibility with DMA-enabled
+ * MACs that do not support scatter-gather.
+ * Beware that this might involve CPU-memcpy before transmitting that would not
+ * be needed without this flag! Use this only if you need to!
+ *
+ * @todo: TCP and IP-frag do not work with this, yet:
+ */
+#ifndef LWIP_NETIF_TX_SINGLE_PBUF
+#define LWIP_NETIF_TX_SINGLE_PBUF 0
+#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
+
+/*
+ ------------------------------------
+ ---------- LOOPIF options ----------
+ ------------------------------------
+*/
+/**
+ * Support loop interface (127.0.0.1) and loopif.c
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_HAVE_LOOPIF 0
+
+/*
+ ------------------------------------
+ ---------- SLIPIF options ----------
+ ------------------------------------
+*/
+/**
+ * Support slip interface and slipif.c
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_HAVE_SLIPIF 0
+
+/*
+ ------------------------------------
+ ---------- Thread options ----------
+ ------------------------------------
+*/
+/**
+ * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
+ */
+#ifndef TCPIP_THREAD_NAME
+#define TCPIP_THREAD_NAME "tcpip_thread"
+#endif
+
+/**
+ * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef TCPIP_THREAD_STACKSIZE
+#define TCPIP_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3)
+#endif
+
+/**
+ * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef TCPIP_THREAD_PRIO
+#define TCPIP_THREAD_PRIO 0
+#endif
+
+/**
+ * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
+ * The queue size value itself is platform-dependent, but is passed to
+ * sys_mbox_new() when tcpip_init is called.
+ */
+#ifndef TCPIP_MBOX_SIZE
+#define TCPIP_MBOX_SIZE 0
+#endif
+
+/**
+ * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.
+ */
+#ifndef SLIPIF_THREAD_NAME
+#define SLIPIF_THREAD_NAME "slipif_loop"
+#endif
+
+/**
+ * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef SLIPIF_THREAD_STACKSIZE
+#define SLIPIF_THREAD_STACKSIZE 0
+#endif
+
+/**
+ * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef SLIPIF_THREAD_PRIO
+#define SLIPIF_THREAD_PRIO 1
+#endif
+
+/**
+ * PPP_THREAD_NAME: The name assigned to the pppMain thread.
+ */
+#ifndef PPP_THREAD_NAME
+#define PPP_THREAD_NAME "pppMain"
+#endif
+
+/**
+ * PPP_THREAD_STACKSIZE: The stack size used by the pppMain thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef PPP_THREAD_STACKSIZE
+#define PPP_THREAD_STACKSIZE 0
+#endif
+
+/**
+ * PPP_THREAD_PRIO: The priority assigned to the pppMain thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef PPP_THREAD_PRIO
+#define PPP_THREAD_PRIO 1
+#endif
+
+/**
+ * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.
+ */
+#ifndef DEFAULT_THREAD_NAME
+#define DEFAULT_THREAD_NAME "lwIP"
+#endif
+
+/**
+ * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef DEFAULT_THREAD_STACKSIZE
+#define DEFAULT_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3)
+#endif
+
+/**
+ * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef DEFAULT_THREAD_PRIO
+#define DEFAULT_THREAD_PRIO 1
+#endif
+
+/**
+ * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_RAW_RECVMBOX_SIZE
+#define DEFAULT_RAW_RECVMBOX_SIZE 0
+#endif
+
+/**
+ * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_UDP_RECVMBOX_SIZE
+#define DEFAULT_UDP_RECVMBOX_SIZE 0
+#endif
+
+/**
+ * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_TCP_RECVMBOX_SIZE
+#define DEFAULT_TCP_RECVMBOX_SIZE 0
+#endif
+
+/**
+ * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
+ * The queue size value itself is platform-dependent, but is passed to
+ * sys_mbox_new() when the acceptmbox is created.
+ */
+#ifndef DEFAULT_ACCEPTMBOX_SIZE
+#define DEFAULT_ACCEPTMBOX_SIZE 0
+#endif
+
+/*
+ ----------------------------------------------
+ ---------- Sequential layer options ----------
+ ----------------------------------------------
+*/
+/**
+ * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
+ * Don't use it if you're not an active lwIP project member
+ */
+#ifndef LWIP_TCPIP_CORE_LOCKING
+#define LWIP_TCPIP_CORE_LOCKING 0
+#endif
+
+/**
+ * Enable Netconn API (require to use api_lib.c)
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_NETCONN 1
+
+/*
+ ------------------------------------
+ ---------- Socket options ----------
+ ------------------------------------
+*/
+/**
+ * Enable Socket API (require to use sockets.c)
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_SOCKET 1
+#if LWIP_SOCKET
+ /*
+ * The sockets.c file requires this macro to be defined to really
+ * set errno on errors.
+ */
+ #define ERRNO
+#endif
+
+/**
+ * Enable BSD-style sockets functions names.
+ *
+ * NOTE: do not change this!!!
+ */
+#ifndef LWIP_COMPAT_SOCKETS
+#define LWIP_COMPAT_SOCKETS 0
+#endif
+
+/**
+ * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.
+ * Disable this option if you use a POSIX operating system that uses the same
+ * names (read, write & close). (only used if you use sockets.c)
+ */
+#ifndef LWIP_POSIX_SOCKETS_IO_NAMES
+#define LWIP_POSIX_SOCKETS_IO_NAMES 0
+#endif
+
+/**
+ * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
+ * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
+ * in seconds. (does not require sockets.c, and will affect tcp.c)
+ */
+#ifndef LWIP_TCP_KEEPALIVE
+#define LWIP_TCP_KEEPALIVE 0
+#endif
+
+/**
+ * LWIP_SO_RCVTIMEO==1: Enable SO_RCVTIMEO processing.
+ */
+#ifndef LWIP_SO_RCVTIMEO
+#define LWIP_SO_RCVTIMEO 0
+#endif
+
+/**
+ * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
+ */
+#ifndef LWIP_SO_RCVBUF
+#define LWIP_SO_RCVBUF 0
+#endif
+
+/**
+ * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
+ */
+#ifndef RECV_BUFSIZE_DEFAULT
+#define RECV_BUFSIZE_DEFAULT INT_MAX
+#endif
+
+/**
+ * SO_REUSE==1: Enable SO_REUSEADDR and SO_REUSEPORT options. DO NOT USE!
+ */
+#ifndef SO_REUSE
+#define SO_REUSE 0
+#endif
+
+/*
+ ----------------------------------------
+ ---------- Statistics options ----------
+ ----------------------------------------
+*/
+/**
+ * LWIP_STATS==1: Enable statistics collection in lwip_stats.
+ */
+#ifndef LWIP_STATS
+#define LWIP_STATS 0
+#endif
+
+#if LWIP_STATS
+
+/**
+ * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
+ */
+#ifndef LWIP_STATS_DISPLAY
+#define LWIP_STATS_DISPLAY 0
+#endif
+
+/**
+ * LINK_STATS==1: Enable link stats.
+ */
+#ifndef LINK_STATS
+#define LINK_STATS 1
+#endif
+
+/**
+ * ETHARP_STATS==1: Enable etharp stats.
+ */
+#ifndef ETHARP_STATS
+#define ETHARP_STATS (LWIP_ARP)
+#endif
+
+/**
+ * IP_STATS==1: Enable IP stats.
+ */
+#ifndef IP_STATS
+#define IP_STATS 1
+#endif
+
+/**
+ * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is
+ * on if using either frag or reass.
+ */
+#ifndef IPFRAG_STATS
+#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG)
+#endif
+
+/**
+ * ICMP_STATS==1: Enable ICMP stats.
+ */
+#ifndef ICMP_STATS
+#define ICMP_STATS 1
+#endif
+
+/**
+ * IGMP_STATS==1: Enable IGMP stats.
+ */
+#ifndef IGMP_STATS
+#define IGMP_STATS (LWIP_IGMP)
+#endif
+
+/**
+ * UDP_STATS==1: Enable UDP stats. Default is on if
+ * UDP enabled, otherwise off.
+ */
+#ifndef UDP_STATS
+#define UDP_STATS (LWIP_UDP)
+#endif
+
+/**
+ * TCP_STATS==1: Enable TCP stats. Default is on if TCP
+ * enabled, otherwise off.
+ */
+#ifndef TCP_STATS
+#define TCP_STATS (LWIP_TCP)
+#endif
+
+/**
+ * MEM_STATS==1: Enable mem.c stats.
+ */
+#ifndef MEM_STATS
+#define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0))
+#endif
+
+/**
+ * MEMP_STATS==1: Enable memp.c pool stats.
+ */
+#ifndef MEMP_STATS
+#define MEMP_STATS (MEMP_MEM_MALLOC == 0)
+#endif
+
+/**
+ * SYS_STATS==1: Enable system stats (sem and mbox counts, etc).
+ */
+#ifndef SYS_STATS
+#define SYS_STATS (NO_SYS == 0)
+#endif
+
+#else
+
+#define LINK_STATS 0
+#define ETHARP_STATS 0
+#define IP_STATS 0
+#define IPFRAG_STATS 0
+#define ICMP_STATS 0
+#define IGMP_STATS 0
+#define UDP_STATS 0
+#define TCP_STATS 0
+#define MEM_STATS 0
+#define MEMP_STATS 0
+#define SYS_STATS 0
+#define LWIP_STATS_DISPLAY 0
+
+#endif /* LWIP_STATS */
+
+/*
+ ---------------------------------
+ ---------- PPP options ----------
+ ---------------------------------
+*/
+/**
+ * Enable PPP.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define PPP_SUPPORT 0
+
+/**
+ * Enable PPP Over Ethernet.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define PPPOE_SUPPORT 0
+
+/**
+ * PPPOS_SUPPORT==1: Enable PPP Over Serial
+ */
+#ifndef PPPOS_SUPPORT
+#define PPPOS_SUPPORT PPP_SUPPORT
+#endif
+
+#if PPP_SUPPORT
+
+/**
+ * NUM_PPP: Max PPP sessions.
+ */
+#ifndef NUM_PPP
+#define NUM_PPP 1
+#endif
+
+/**
+ * PAP_SUPPORT==1: Support PAP.
+ */
+#ifndef PAP_SUPPORT
+#define PAP_SUPPORT 0
+#endif
+
+/**
+ * CHAP_SUPPORT==1: Support CHAP.
+ */
+#ifndef CHAP_SUPPORT
+#define CHAP_SUPPORT 0
+#endif
+
+/**
+ * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef MSCHAP_SUPPORT
+#define MSCHAP_SUPPORT 0
+#endif
+
+/**
+ * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef CBCP_SUPPORT
+#define CBCP_SUPPORT 0
+#endif
+
+/**
+ * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef CCP_SUPPORT
+#define CCP_SUPPORT 0
+#endif
+
+/**
+ * VJ_SUPPORT==1: Support VJ header compression.
+ */
+#ifndef VJ_SUPPORT
+#define VJ_SUPPORT 0
+#endif
+
+/**
+ * MD5_SUPPORT==1: Support MD5 (see also CHAP).
+ */
+#ifndef MD5_SUPPORT
+#define MD5_SUPPORT 0
+#endif
+
+/*
+ * Timeouts
+ */
+#ifndef FSM_DEFTIMEOUT
+#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */
+#endif
+
+#ifndef FSM_DEFMAXTERMREQS
+#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */
+#endif
+
+#ifndef FSM_DEFMAXCONFREQS
+#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */
+#endif
+
+#ifndef FSM_DEFMAXNAKLOOPS
+#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */
+#endif
+
+#ifndef UPAP_DEFTIMEOUT
+#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */
+#endif
+
+#ifndef UPAP_DEFREQTIME
+#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */
+#endif
+
+#ifndef CHAP_DEFTIMEOUT
+#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */
+#endif
+
+#ifndef CHAP_DEFTRANSMITS
+#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */
+#endif
+
+/* Interval in seconds between keepalive echo requests, 0 to disable. */
+#ifndef LCP_ECHOINTERVAL
+#define LCP_ECHOINTERVAL 0
+#endif
+
+/* Number of unanswered echo requests before failure. */
+#ifndef LCP_MAXECHOFAILS
+#define LCP_MAXECHOFAILS 3
+#endif
+
+/* Max Xmit idle time (in jiffies) before resend flag char. */
+#ifndef PPP_MAXIDLEFLAG
+#define PPP_MAXIDLEFLAG 100
+#endif
+
+/*
+ * Packet sizes
+ *
+ * Note - lcp shouldn't be allowed to negotiate stuff outside these
+ * limits. See lcp.h in the pppd directory.
+ * (XXX - these constants should simply be shared by lcp.c instead
+ * of living in lcp.h)
+ */
+#define PPP_MTU 1500 /* Default MTU (size of Info field) */
+#ifndef PPP_MAXMTU
+/* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */
+#define PPP_MAXMTU 1500 /* Largest MTU we allow */
+#endif
+#define PPP_MINMTU 64
+#define PPP_MRU 1500 /* default MRU = max length of info field */
+#define PPP_MAXMRU 1500 /* Largest MRU we allow */
+#ifndef PPP_DEFMRU
+#define PPP_DEFMRU 296 /* Try for this */
+#endif
+#define PPP_MINMRU 128 /* No MRUs below this */
+
+#ifndef MAXNAMELEN
+#define MAXNAMELEN 256 /* max length of hostname or name for auth */
+#endif
+#ifndef MAXSECRETLEN
+#define MAXSECRETLEN 256 /* max length of password or secret */
+#endif
+
+#endif /* PPP_SUPPORT */
+
+/*
+ --------------------------------------
+ ---------- Checksum options ----------
+ --------------------------------------
+*/
+/**
+ * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.
+ */
+#ifndef CHECKSUM_GEN_IP
+#define CHECKSUM_GEN_IP 1
+#endif
+
+/**
+ * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.
+ */
+#ifndef CHECKSUM_GEN_UDP
+#define CHECKSUM_GEN_UDP 1
+#endif
+
+/**
+ * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.
+ */
+#ifndef CHECKSUM_GEN_TCP
+#define CHECKSUM_GEN_TCP 1
+#endif
+
+/**
+ * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.
+ */
+#ifndef CHECKSUM_CHECK_IP
+#define CHECKSUM_CHECK_IP 1
+#endif
+
+/**
+ * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.
+ */
+#ifndef CHECKSUM_CHECK_UDP
+#define CHECKSUM_CHECK_UDP 1
+#endif
+
+/**
+ * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.
+ */
+#ifndef CHECKSUM_CHECK_TCP
+#define CHECKSUM_CHECK_TCP 1
+#endif
+
+/*
+ ---------------------------------------
+ ---------- Debugging options ----------
+ ---------------------------------------
+*/
+
+#ifdef _DEBUG
+#define LWIP_DEBUG
+#endif
+
+/**
+ * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is
+ * compared against this value. If it is smaller, then debugging
+ * messages are written.
+ */
+#ifndef LWIP_DBG_MIN_LEVEL
+#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL
+#endif
+
+/**
+ * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable
+ * debug messages of certain types.
+ */
+#ifndef LWIP_DBG_TYPES_ON
+#define LWIP_DBG_TYPES_ON LWIP_DBG_ON
+#endif
+
+/**
+ * ETHARP_DEBUG: Enable debugging in etharp.c.
+ */
+#ifndef ETHARP_DEBUG
+#define ETHARP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * NETIF_DEBUG: Enable debugging in netif.c.
+ */
+#ifndef NETIF_DEBUG
+#define NETIF_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * PBUF_DEBUG: Enable debugging in pbuf.c.
+ */
+#ifndef PBUF_DEBUG
+#define PBUF_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * API_LIB_DEBUG: Enable debugging in api_lib.c.
+ */
+#ifndef API_LIB_DEBUG
+#define API_LIB_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * API_MSG_DEBUG: Enable debugging in api_msg.c.
+ */
+#ifndef API_MSG_DEBUG
+#define API_MSG_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SOCKETS_DEBUG: Enable debugging in sockets.c.
+ */
+#ifndef SOCKETS_DEBUG
+#define SOCKETS_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * ICMP_DEBUG: Enable debugging in icmp.c.
+ */
+#ifndef ICMP_DEBUG
+#define ICMP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * IGMP_DEBUG: Enable debugging in igmp.c.
+ */
+#ifndef IGMP_DEBUG
+#define IGMP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * INET_DEBUG: Enable debugging in inet.c.
+ */
+#ifndef INET_DEBUG
+#define INET_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * IP_DEBUG: Enable debugging for IP.
+ */
+#ifndef IP_DEBUG
+#define IP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass.
+ */
+#ifndef IP_REASS_DEBUG
+#define IP_REASS_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * RAW_DEBUG: Enable debugging in raw.c.
+ */
+#ifndef RAW_DEBUG
+#define RAW_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * MEM_DEBUG: Enable debugging in mem.c.
+ */
+#ifndef MEM_DEBUG
+#define MEM_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * MEMP_DEBUG: Enable debugging in memp.c.
+ */
+#ifndef MEMP_DEBUG
+#define MEMP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SYS_DEBUG: Enable debugging in sys.c.
+ */
+#ifndef SYS_DEBUG
+#define SYS_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_DEBUG: Enable debugging for TCP.
+ */
+#ifndef TCP_DEBUG
+#define TCP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
+ */
+#ifndef TCP_INPUT_DEBUG
+#define TCP_INPUT_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit.
+ */
+#ifndef TCP_FR_DEBUG
+#define TCP_FR_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit
+ * timeout.
+ */
+#ifndef TCP_RTO_DEBUG
+#define TCP_RTO_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_CWND_DEBUG: Enable debugging for TCP congestion window.
+ */
+#ifndef TCP_CWND_DEBUG
+#define TCP_CWND_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating.
+ */
+#ifndef TCP_WND_DEBUG
+#define TCP_WND_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
+ */
+#ifndef TCP_OUTPUT_DEBUG
+#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_RST_DEBUG: Enable debugging for TCP with the RST message.
+ */
+#ifndef TCP_RST_DEBUG
+#define TCP_RST_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths.
+ */
+#ifndef TCP_QLEN_DEBUG
+#define TCP_QLEN_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * UDP_DEBUG: Enable debugging in UDP.
+ */
+#ifndef UDP_DEBUG
+#define UDP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCPIP_DEBUG: Enable debugging in tcpip.c.
+ */
+#ifndef TCPIP_DEBUG
+#define TCPIP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * PPP_DEBUG: Enable debugging for PPP.
+ */
+#ifndef PPP_DEBUG
+#define PPP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SLIP_DEBUG: Enable debugging in slipif.c.
+ */
+#ifndef SLIP_DEBUG
+#define SLIP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * DHCP_DEBUG: Enable debugging in dhcp.c.
+ */
+#ifndef DHCP_DEBUG
+#define DHCP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * AUTOIP_DEBUG: Enable debugging in autoip.c.
+ */
+#ifndef AUTOIP_DEBUG
+#define AUTOIP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SNMP_MSG_DEBUG: Enable debugging for SNMP messages.
+ */
+#ifndef SNMP_MSG_DEBUG
+#define SNMP_MSG_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs.
+ */
+#ifndef SNMP_MIB_DEBUG
+#define SNMP_MIB_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * DNS_DEBUG: Enable debugging for DNS.
+ */
+#ifndef DNS_DEBUG
+#define DNS_DEBUG LWIP_DBG_OFF
+#endif
+
+/* Custom definitions: !!!DO NOT CHANGE THIS SECTION!!! */
+#define LWIP_TIMEVAL_PRIVATE 0
+
+#endif /* CFG_LWIP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \author Stefano Fedrigo <aleph@develer.com>
+ *
+ * \brief Configuration file for NAND driver module.
+ */
+
+#ifndef CFG_NAND_H
+#define CFG_NAND_H
+
+/**
+ * Page data size
+ *
+ * Size of the data section of a programmable page in bytes.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_DATA_SIZE 2048
+
+/**
+ * Page spare area size
+ *
+ * Size of the spare section of a programmable page in bytes.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_SPARE_SIZE 64
+
+/**
+ * Pages per block
+ *
+ * Number of pages in a erase block.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_PAGES_PER_BLOCK 64
+
+/**
+ * Number of blocks
+ *
+ * Total number of erase blocks in one NAND chip.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_NUM_BLOCK 2048
+
+/**
+ * Number of reserved blocks
+ *
+ * Blocks reserved for remapping defective NAND blocks.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_NUM_REMAP_BLOCKS 128
+
+/**
+ * NAND operations timeout
+ *
+ * How many milliseconds the cpu waits for
+ * completion of NAND operations.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_TMOUT 100
+
+/**
+ * Module logging level
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define CONFIG_NAND_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define CONFIG_NAND_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_NAND_H */
#ifndef CFG_PARSER_H
#define CFG_PARSER_H
+/**
+ * Max number of arguments and results for each command
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_PARSER_MAX_ARGS 4
+
+/**
+ * Max number of commands
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 8
+ */
+#define CONFIG_MAX_COMMANDS_NUMBER 16
+/**
+ * Enable compatibility behaviour.
+ *
+ * Skip the first word from incoming commands. Don't enable in new projects.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_ENABLE_COMPAT_BEHAVIOUR 1
#endif /* CFG_PARSER_H */
*/
#define CONFIG_KERN_PRI 1
+/**
+ * Priority-inheritance protocol.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_KERN_PRI_INHERIT 0
+
/**
* Dynamic memory allocation for processes.
* $WIZ$ type = "boolean"
*/
#define PWM_LOG_FORMAT LOG_FMT_VERBOSE
+/**
+ * Enable the OLD pwm API.
+ * Not recommended for new projects.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CFG_PWM_ENABLE_OLD_API 1
+
#endif /* CFG_PWM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the "random" module
+ */
+
+#ifndef CFG_RANDOM_H
+#define CFG_RANDOM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define RANDOM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define RANDOM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Random security level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "random_level"
+ */
+#define RANDOM_SECURITY_LEVEL RANDOM_SECURITY_MINIMUM
+
+#endif /* CFG_RANDOM_H */
*/
#define CONFIG_SD_AUTOASSIGN_FAT 1
+/**
+ * SD bus mode.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sd_mode"
+ */
+#define CONFIG_SD_MODE SD_SPI_MODE
+
/**
* Enable backward compatibility for sd_init().
* If enabled, sd_init() will allocate internally an Sd context,
*
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_order_bit"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
/**
* SPI clock division factor.
* $WIZ$ type = "int"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_CLOCK_DIV 16
* SPI clock polarity: normal low or normal high.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_pol"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
* sample on second clock edge.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_phase"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
--- /dev/null
+#ifndef CFG_TFTP_H
+#define CFG_TFTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define TFTP_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define TFTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+#endif /* CFG_TFTP_H */
*/
#define CONFIG_USB_BUFSIZE 64
+/**
+ * Maximum number of USB device interfaces (default = 1).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_USB_INTERFACE_MAX 1
+
+/**
+ * Maximum number of allocated endpoints (0 = auto).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_USB_EP_MAX 0
+
+/**
+ * Maximum packet size of the control endpoint 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 8
+ */
+#define CONFIG_EP0_MAX_SIZE 8
+
#endif /* CFG_USB_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the WM8731 module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_WM8731_H
+#define CFG_WM8731_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define WM8731_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define WM8731_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * Digital control: ADC High pass filter
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DAPC 0
+
+
+/**
+ * Digital control: De-emphasis control
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_deemp"
+ */
+#define CONFIG_WM8731_DEEMP WM8731_DEEMP_DISABLE
+
+/**
+ * Digital control: DAC soft mute control
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DACMU 0
+
+
+/**
+ * Analog control: Microphone boost
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MICBOOST 0
+
+/**
+ * Analog control: Microphone/Line Input select to ADC
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_insel"
+ */
+#define CONFIG_WM8731_INSEL WM8731_INSEL_MIC
+
+
+/**
+ * Analog control: out selector
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_bypass"
+ */
+#define CONFIG_WM8731_BYPASS WM8731_DACSEL
+
+/**
+ * Analog control: Side tone attenuation
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_sideatt"
+ */
+#define CONFIG_WM8731_SIDEATT WM8731_SIDEATT_6dB
+
+
+/**
+ * Digital Audio interface format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_fmt"
+ */
+#define CONFIG_WM8731_INTERFACE_FORMAT WM8731_FORMAT_I2S
+
+/**
+ * Digital Audio data bit length.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_databit"
+ */
+#define CONFIG_WM8731_IWL_BITS WM8731_IWL_16_BIT
+
+/**
+ * Enable Master mode.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MS 0
+
+
+/**
+ * Data sampling rate, refer to datasheet for this value.
+ * $WIZ$ type = "hex"
+ */
+#define CONFIG_WM8731_SAMPLING_RATES 0x6
+
+#endif /* CFG_WM8731_H */
p4
sS'WIZARD_VERSION'
p5
-I3
+I4
sS'PROJECT_NAME'
p6
-Vcontext_switch
+Vstm32-p103_context_switch
p7
sS'TOOLCHAIN'
p8
(dp9
-Vtarget
+S'path'
p10
-Varm-none-eabi
+Varm-none-eabi-gcc
p11
-sVthread
+ssS'PROJECT_SRC_PATH_FROM_MAKEFILE'
p12
-Vsingle
+Vboards/stm32-p103/benchmark/stm32-p103_context_switch
p13
-sVconfigured
+sS'ENABLED_MODULES'
p14
-V/scratch/julian/2010q1-release-eabi-lite/src/gcc-4.4-2010q1/configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=arm-none-eabi --enable-threads --disable-libmudflap --disable-libssp --disable-libstdcxx-pch --enable-extra-sgxxlite-multilibs --with-gnu-as --with-gnu-ld --with-specs='%{O2:%{!fno-remove-local-statics: -fremove-local-statics}} %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: -fremove-local-statics}}}' --enable-languages=c,c++ --disable-shared --disable-lto --with-newlib --with-pkgversion='Sourcery G++ Lite 2010q1-188' --with-bugurl=https://support.codesourcery.com/GNUToolchain/ --disable-nls --prefix=/opt/codesourcery --with-headers=yes --with-sysroot=/opt/codesourcery/arm-none-eabi --with-build-sysroot=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi --with-gmp=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-mpfr=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-ppl=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-cloog=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --disable-libgomp --enable-poison-system-directories --with-build-time-tools=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi/bin --with-build-time-tools=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi/bin
-p15
-sVversion
+(lp15
+S'context_switch'
p16
-V4.4.1
+aS'formatwr'
p17
-sVbuild
+aS'heap'
p18
-VSourcery G++ Lite 2010q1-188
+aS'kernel'
p19
-sVpath
+aS'kfile'
p20
-V/localhome/toolchain/arm/bin/arm-none-eabi-gcc
+aS'ser'
p21
-ssS'ENABLED_MODULES'
+aS'signal'
p22
-(lp23
-S'signal'
+aS'timer'
+p23
+asS'CPU_NAME'
p24
-aS'kernel'
+VSTM32F103RB
p25
-aS'ser'
+sS'PROJECT_HW_PATH'
p26
-aS'kfile'
+S'../..'
p27
-aS'context_switch'
+sS'PROJECT_SRC_PATH'
p28
-aS'timer'
+S'.'
p29
-aS'formatwr'
+sS'PRESET'
p30
-aS'heap'
+I01
+sS'PROJECT_HW_PATH_FROM_MAKEFILE'
p31
-asS'CPU_NAME'
+Vboards/stm32-p103
p32
-VSTM32F103RB
+sS'OUTPUT'
p33
-sS'PROJECT_HW_PATH'
-p34
-S'../..'
+(lp34
+S'codelite'
p35
-sS'PROJECT_SRC_PATH'
-p36
-S'.'
-p37
-sS'PRESET'
-p38
-I01
-sS'OUTPUT'
-p39
-(lp40
-s.
\ No newline at end of file
+as.
\ No newline at end of file
#
# Wizard autogenerated makefile.
-# DO NOT EDIT, use the context_switch_user.mk file instead.
+# DO NOT EDIT, use the stm32-p103_context_switch_user.mk file instead.
#
# Constants automatically defined by the selected modules
# Our target application
-TRG += context_switch
+TRG += stm32-p103_context_switch
-context_switch_PREFIX = "arm-none-eabi-"
+stm32-p103_context_switch_PREFIX = "arm-none-eabi-"
-context_switch_SUFFIX = ""
+stm32-p103_context_switch_SUFFIX = ""
-context_switch_SRC_PATH = boards/stm32-p103/benchmark
+stm32-p103_context_switch_SRC_PATH = boards/stm32-p103/benchmark/stm32-p103_context_switch
-context_switch_HW_PATH = boards/stm32-p103
+stm32-p103_context_switch_HW_PATH = boards/stm32-p103
-# Files automatically generated by the wizard. DO NOT EDIT, USE context_switch_USER_CSRC INSTEAD!
-context_switch_WIZARD_CSRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE stm32-p103_context_switch_USER_CSRC INSTEAD!
+stm32-p103_context_switch_WIZARD_CSRC = \
+ bertos/benchmark/context_switch.c \
bertos/cpu/cortex-m3/drv/ser_stm32.c \
- bertos/cpu/cortex-m3/hw/switch_ctx_cm3.c \
- bertos/mware/event.c \
bertos/cpu/cortex-m3/drv/timer_cm3.c \
- bertos/struct/heap.c \
- bertos/benchmark/context_switch.c \
- bertos/io/kfile.c \
- bertos/mware/formatwr.c \
+ bertos/cpu/cortex-m3/hw/switch_ctx_cm3.c \
+ bertos/drv/ser.c \
bertos/drv/timer.c \
- bertos/kern/signal.c \
+ bertos/io/kfile.c \
bertos/kern/proc.c \
- bertos/drv/ser.c \
+ bertos/kern/signal.c \
+ bertos/mware/event.c \
+ bertos/mware/formatwr.c \
bertos/mware/hex.c \
+ bertos/struct/heap.c \
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE context_switch_USER_PCSRC INSTEAD!
-context_switch_WIZARD_PCSRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE stm32-p103_context_switch_USER_PCSRC INSTEAD!
+stm32-p103_context_switch_WIZARD_PCSRC = \
\
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE context_switch_USER_CPPASRC INSTEAD!
-context_switch_WIZARD_CPPASRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE stm32-p103_context_switch_USER_CPPASRC INSTEAD!
+stm32-p103_context_switch_WIZARD_CPPASRC = \
\
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE context_switch_USER_CXXSRC INSTEAD!
-context_switch_WIZARD_CXXSRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE stm32-p103_context_switch_USER_CXXSRC INSTEAD!
+stm32-p103_context_switch_WIZARD_CXXSRC = \
\
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE context_switch_USER_ASRC INSTEAD!
-context_switch_WIZARD_ASRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE stm32-p103_context_switch_USER_ASRC INSTEAD!
+stm32-p103_context_switch_WIZARD_ASRC = \
\
#
-context_switch_CPPFLAGS = -D'CPU_FREQ=(72000000UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -I$(context_switch_HW_PATH) -I$(context_switch_SRC_PATH) $(context_switch_CPU_CPPFLAGS) $(context_switch_USER_CPPFLAGS)
+stm32-p103_context_switch_CPPFLAGS = -D'CPU_FREQ=(72000000UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -I$(stm32-p103_context_switch_HW_PATH) -I$(stm32-p103_context_switch_SRC_PATH) $(stm32-p103_context_switch_CPU_CPPFLAGS) $(stm32-p103_context_switch_USER_CPPFLAGS)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-context_switch_LDFLAGS = $(context_switch_CPU_LDFLAGS) $(context_switch_WIZARD_LDFLAGS) $(context_switch_USER_LDFLAGS)
+stm32-p103_context_switch_LDFLAGS = $(stm32-p103_context_switch_CPU_LDFLAGS) $(stm32-p103_context_switch_WIZARD_LDFLAGS) $(stm32-p103_context_switch_USER_LDFLAGS)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-context_switch_CPPAFLAGS = $(context_switch_CPU_CPPAFLAGS) $(context_switch_WIZARD_CPPAFLAGS) $(context_switch_USER_CPPAFLAGS)
+stm32-p103_context_switch_CPPAFLAGS = $(stm32-p103_context_switch_CPU_CPPAFLAGS) $(stm32-p103_context_switch_WIZARD_CPPAFLAGS) $(stm32-p103_context_switch_USER_CPPAFLAGS)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-context_switch_CSRC = $(context_switch_CPU_CSRC) $(context_switch_WIZARD_CSRC) $(context_switch_USER_CSRC)
+stm32-p103_context_switch_CSRC = $(stm32-p103_context_switch_CPU_CSRC) $(stm32-p103_context_switch_WIZARD_CSRC) $(stm32-p103_context_switch_USER_CSRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-context_switch_PCSRC = $(context_switch_CPU_PCSRC) $(context_switch_WIZARD_PCSRC) $(context_switch_USER_PCSRC)
+stm32-p103_context_switch_PCSRC = $(stm32-p103_context_switch_CPU_PCSRC) $(stm32-p103_context_switch_WIZARD_PCSRC) $(stm32-p103_context_switch_USER_PCSRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-context_switch_CPPASRC = $(context_switch_CPU_CPPASRC) $(context_switch_WIZARD_CPPASRC) $(context_switch_USER_CPPASRC)
+stm32-p103_context_switch_CPPASRC = $(stm32-p103_context_switch_CPU_CPPASRC) $(stm32-p103_context_switch_WIZARD_CPPASRC) $(stm32-p103_context_switch_USER_CPPASRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-context_switch_CXXSRC = $(context_switch_CPU_CXXSRC) $(context_switch_WIZARD_CXXSRC) $(context_switch_USER_CXXSRC)
+stm32-p103_context_switch_CXXSRC = $(stm32-p103_context_switch_CPU_CXXSRC) $(stm32-p103_context_switch_WIZARD_CXXSRC) $(stm32-p103_context_switch_USER_CXXSRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-context_switch_ASRC = $(context_switch_CPU_ASRC) $(context_switch_WIZARD_ASRC) $(context_switch_USER_ASRC)
+stm32-p103_context_switch_ASRC = $(stm32-p103_context_switch_CPU_ASRC) $(stm32-p103_context_switch_WIZARD_ASRC) $(stm32-p103_context_switch_USER_ASRC)
# CPU specific flags and options, defined in the CPU definition files.
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-context_switch_CPU_CPPASRC = bertos/cpu/cortex-m3/hw/crt_cm3.S bertos/cpu/cortex-m3/hw/vectors_cm3.S
-context_switch_CPU_CPPAFLAGS = -g -gdwarf-2 -mthumb -mno-thumb-interwork
-context_switch_CPU_CPPFLAGS = -O0 -g3 -gdwarf-2 -mthumb -mno-thumb-interwork -fno-strict-aliasing -fwrapv -fverbose-asm -Ibertos/cpu/cortex-m3/ -D__ARM_STM32F103RB__
-context_switch_CPU_CSRC = bertos/cpu/cortex-m3/hw/init_cm3.c bertos/cpu/cortex-m3/drv/irq_cm3.c bertos/cpu/cortex-m3/drv/gpio_stm32.c bertos/cpu/cortex-m3/drv/clock_stm32.c
-context_switch_PROGRAMMER_CPU = stm32
-context_switch_CPU_LDFLAGS = -mthumb -mno-thumb-interwork -nostartfiles -Wl,--no-warn-mismatch -T bertos/cpu/cortex-m3/scripts/stm32f103rb_rom.ld
-context_switch_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
-context_switch_CPU = cortex-m3
-context_switch_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
-context_switch_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh
-context_switch_FLASH_SCRIPT = bertos/prg_scripts/arm/flash-stm32.sh
-
-include $(context_switch_SRC_PATH)/context_switch_user.mk
+stm32-p103_context_switch_CPU_CPPASRC = bertos/cpu/cortex-m3/hw/crt_cm3.S bertos/cpu/cortex-m3/hw/vectors_cm3.S
+stm32-p103_context_switch_CPU_CPPAFLAGS = -g -gdwarf-2 -mthumb -mno-thumb-interwork
+stm32-p103_context_switch_CPU_CPPFLAGS = -O0 -g3 -gdwarf-2 -mthumb -mno-thumb-interwork -fno-strict-aliasing -fwrapv -fverbose-asm -Ibertos/cpu/cortex-m3/ -D__ARM_STM32F103RB__
+stm32-p103_context_switch_CPU_CSRC = bertos/cpu/cortex-m3/hw/init_cm3.c bertos/cpu/cortex-m3/drv/irq_cm3.c bertos/cpu/cortex-m3/drv/gpio_stm32.c bertos/cpu/cortex-m3/drv/clock_stm32.c
+stm32-p103_context_switch_PROGRAMMER_CPU = stm32
+stm32-p103_context_switch_CPU_LDFLAGS = -mthumb -mno-thumb-interwork -nostartfiles -Wl,--no-warn-mismatch -Wl,-dT bertos/cpu/cortex-m3/scripts/stm32f103rb_rom.ld
+stm32-p103_context_switch_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
+stm32-p103_context_switch_CPU = cortex-m3
+stm32-p103_context_switch_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
+stm32-p103_context_switch_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh
+stm32-p103_context_switch_FLASH_SCRIPT = bertos/prg_scripts/arm/flash-stm32.sh
+
+include $(stm32-p103_context_switch_SRC_PATH)/stm32-p103_context_switch_user.mk
#
# Programmer interface configuration, see http://dev.bertos.org/wiki/ProgrammerInterface for help
-context_switch_PROGRAMMER_TYPE = none
-context_switch_PROGRAMMER_PORT = none
+stm32-p103_context_switch_PROGRAMMER_TYPE = none
+stm32-p103_context_switch_PROGRAMMER_PORT = none
# Files included by the user.
-context_switch_USER_CSRC = \
- $(context_switch_SRC_PATH)/main.c \
+stm32-p103_context_switch_USER_CSRC = \
+ $(stm32-p103_context_switch_SRC_PATH)/main.c \
#
# Files included by the user.
-context_switch_USER_PCSRC = \
+stm32-p103_context_switch_USER_PCSRC = \
#
# Files included by the user.
-context_switch_USER_CPPASRC = \
+stm32-p103_context_switch_USER_CPPASRC = \
#
# Files included by the user.
-context_switch_USER_CXXSRC = \
+stm32-p103_context_switch_USER_CXXSRC = \
#
# Files included by the user.
-context_switch_USER_ASRC = \
+stm32-p103_context_switch_USER_ASRC = \
#
# Flags included by the user.
-context_switch_USER_LDFLAGS = \
+stm32-p103_context_switch_USER_LDFLAGS = \
#
# Flags included by the user.
-context_switch_USER_CPPAFLAGS = \
+stm32-p103_context_switch_USER_CPPAFLAGS = \
#
# Flags included by the user.
-context_switch_USER_CPPFLAGS = \
+stm32-p103_context_switch_USER_CPPFLAGS = \
-O2 \
-fno-strict-aliasing \
-fwrapv \
/**
* Clock Frequency for ADC conversion.
+ * This frequency will be rounded down to an integer
+ * submultiple of CPU_FREQ.
*
* $WIZ$ type = "int"
* $WIZ$ supports = "at91"
+ * $WIZ$ max = 5000000
*/
#define CONFIG_ADC_CLOCK 4800000UL
* Minimum time for starting up a conversion [us].
*
* $WIZ$ type = "int"
- * $WIZ$ min = 0
+ * $WIZ$ min = 20
* $WIZ$ supports = "at91"
*/
#define CONFIG_ADC_STARTUP_TIME 20
/**
- * Minimum time for sample and hold [us].
+ * Minimum time for sample and hold [ns].
*
* $WIZ$ type = "int"
- * $WIZ$ min = 0
+ * $WIZ$ min = 600
* $WIZ$ supports = "at91"
*/
#define CONFIG_ADC_SHTIME 834
*/
#define CONFIG_ADC_STROBE 0
+
+/**
+ * Start up timer[s] = startup value / ADCClock [Hz]
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3_adc_sut"
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_SUT ADC_SUT512
+
+/**
+ * Analog Settling Time[s] = settling value / ADCClock[Hz]
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3_adc_stt"
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_STTLING ADC_AST17
+
+/**
+ * Tracking Time[s] = (TRACKTIM + 1) / ADCClock[Hz]
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_TRACKTIM 0
+
+/**
+ * Transfer Period[s] = (TRANSFER * 2 + 3) ADCClock[Hz]
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_TRANSFER 1
+
#endif /* CFG_ADC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for DAC module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_DAC_H
+#define CFG_DAC_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define DAC_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define DAC_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * DAC Refresh Period = 1024*REFRESH/DACC Clock
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "sam3x"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 65536
+ */
+#define CONFIG_DAC_REFRESH 16
+
+/**
+ * DAC Startup Time Selection.
+ * see datasheet table.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "sam3x"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 63
+ */
+#define CONFIG_DAC_STARTUP 0
+
+/**
+ * DAC Trigger Selection.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3x_dac_tc"
+ * $WIZ$ supports = "sam3x"
+ */
+#define CONFIG_DAC_TIMER DACC_TRGSEL_TIO_CH0
+
+#endif /* CFG_DAC_H */
*/
#define CONFIG_KDEBUG_BAUDRATE 115200UL
+/**
+ * Clock source for the UART module. You need to write the code to reprogram the respective clock at the required frequency in your project before calling kdbg_init().
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "kdbg_clk_src"
+ * $WIZ$ supports = "msp430"
+ */
+#define CONFIG_KDEBUG_CLOCK_SOURCE KDBG_UART_SMCLK
+
+/**
+ * Clock frequency. (Only if different from MCLK's frequency, otherwise leave it zero)
+ * $WIZ$ type = "int"; min = 0
+ * $WIZ$ supports = "msp430"
+ */
+#define CONFIG_KDEBUG_CLOCK_FREQ 0UL
+
#endif /* CFG_DEBUG_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the Eeprom module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_EEPROM_H
+#define CFG_EEPROM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define EEPROM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define EEPROM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Check this to disable Eeprom deprecated API support.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_EEPROM_DISABLE_OLD_API 0
+
+#endif /* CFG_EEPROM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ *
+ * \brief Configuration file for embedded flash module.
+ */
+
+#ifndef CFG_EMB_FLASH_H
+#define CFG_EMB_FLASH_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define CONFIG_FLASH_EMB_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define CONFIG_FLASH_EMB_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * Write emb flash timeout.
+ * For how many milliseconds the cpu wait
+ * to complete write operation.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_FLASH_WR_TIMEOUT 100
+
+/**
+ * Check this to disable embedded flash deprecated API support.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_FLASH_DISABLE_OLD_API 0
+
+#endif /* CFG_FLASH_AT91_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the generic ethernet driver module
+ */
+
+#ifndef CFG_ETH_H
+#define CFG_ETH_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define ETH_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define ETH_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_ETH_H */
#ifndef CFG_FAT_H
#define CFG_FAT_H
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define FAT_LOG_LEVEL LOG_LVL_ERR
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define FAT_LOG_FORMAT LOG_FMT_VERBOSE
+
+
/**
* Use word alignment to access FAT structure.
* $WIZ$ type = "boolean"
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the HTTP module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_HTTP_H
+#define CFG_HTTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define HTTP_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define HTTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+/**
+ * Default start page to load
+ *
+ * $WIZ$ type = "str"
+ */
+#define HTTP_DEFAULT_PAGE "index.htm"
+
+#endif /* CFG_HTTP_H */
*
*
* \author Luca Ottaviano <lottaviano@develer.com>
+ * \author Daniele Basile <asterix@develer.com>
*/
#ifndef CFG_I2S_H
#define CFG_I2S_H
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define I2S_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define I2S_LOG_FORMAT LOG_FMT_TERSE
+
/**
* Length of each play buffer.
*
#define CONFIG_SAMPLE_FREQ 44100UL
/**
- * Module logging level.
+ * Sample bits per channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_level"
+ * $WIZ$ type = "int"
+ * * $WIZ$ min = 8
+ * $WIZ$ max = 32
*/
-#define I2S_LOG_LEVEL LOG_LVL_INFO
+#define CONFIG_WORD_BIT_SIZE 16
/**
- * Module logging format.
+ * Number of channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_format"
+ * $WIZ$ type = "int"
*/
-#define I2S_LOG_FORMAT LOG_FMT_TERSE
+#define CONFIG_CHANNEL_NUM 2
+
+/**
+ * Size of trasmit start delay
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 255
+ */
+#define CONFIG_DELAY 0
+
+/**
+ * Generate frame sync every 2 x CONFIG_PERIOD bits (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 512
+ */
+#define CONFIG_PERIOD 15
+
+/**
+ * Number of words transmitted in frame
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 16
+ */
+#define CONFIG_WORD_PER_FRAME 1
+
+/**
+ * Size of Synchro data register (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_FRAME_SYNC_SIZE 15
+
+
+/**
+ * Extra Size of Synchro data register (CONFIG_FRAME_SYNC_SIZE + CONFIG_EXTRA_FRAME_SYNC_SIZE * 16 + 1) (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_EXTRA_FRAME_SYNC_SIZE 0
#endif /* CFG_I2S_H */
*/
#define CONFIG_INI_MAX_LINE_LEN 64
+/**
+ * Make case insensitive comparisons.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_INI_CASE_INSENSITIVE 0
+
#endif /* CFG_INI_READER_H */
*/
#define CONFIG_LCD_ADDRESS_FAST 1
+/**
+ * Number of columns in LCD display.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "lcd_hd44_cols"
+ */
+#define CONFIG_LCD_COLS LCD_HD44_COLS_16
+
+/**
+ * Number of rows in LCD display.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "lcd_hd44_rows"
+ */
+#define CONFIG_LCD_ROWS LCD_HD44_ROWS_2
+
#endif /* CFG_LCD_H */
--- /dev/null
+/**
+ * \file cfg_led_7seg.h
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \brief Configuration file for led 7 segment display.
+ *
+ * \author Fabio Bizzi <fbizzi@bizzi.org>
+ *
+ * \addtogroup SevenSegDisplay 7 Segments LED Displays Driver
+ * \{
+ *
+ */
+
+#ifndef CFG_LED_7SEG_H
+#define CFG_LED_7SEG_H
+
+/**
+ * Use a Common Cathode display.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_LED_7SEG_CCAT 0
+
+/**
+ * Number of digit present in the LED display.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ * $WIZ$ max = 8
+ */
+#define CONFIG_LED_7SEG_DIGIT 4
+
+/**
+ * Max lenght of the string to be displayed.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 16
+ * $WIZ$ max = 255
+ */
+#define CONFIG_LED_7SEG_STRLEN 255
+
+/**
+ * Default scrolling speed (ms * CONFIG_LED_7SEG_RTIME).
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_LED_7SEG_SSPEED 10
+
+/**
+ * Default refresh time (ms).
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_LED_7SEG_RTIME 5
+
+#endif /* CFG_LED_7SEG_H */
+ /** \} */ //defgroup drivers
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the lwIP TCP/IP stack module
+ */
+
+/*
+ * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+#ifndef CFG_LWIP_H
+#define CFG_LWIP_H
+
+/*
+ -----------------------------------------------
+ ---------- Platform specific locking ----------
+ -----------------------------------------------
+*/
+
+/**
+ * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
+ * critical regions during buffer allocation, deallocation and memory
+ * allocation and deallocation.
+ */
+#ifndef SYS_LIGHTWEIGHT_PROT
+#define SYS_LIGHTWEIGHT_PROT 1
+#endif
+
+/**
+ * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
+ * use lwIP facilities.
+ */
+#ifndef NO_SYS
+#define NO_SYS 0
+#endif
+
+/**
+ * MEMCPY: override this if you have a faster implementation at hand than the
+ * one included in your C library
+ */
+#ifndef MEMCPY
+#define MEMCPY(dst,src,len) memcpy(dst,src,len)
+#endif
+
+/**
+ * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
+ * call to memcpy() if the length is known at compile time and is small.
+ */
+#ifndef SMEMCPY
+#define SMEMCPY(dst,src,len) memcpy(dst,src,len)
+#endif
+
+/*
+ ------------------------------------
+ ---------- Memory options ----------
+ ------------------------------------
+*/
+/**
+ * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
+ * instead of the lwip internal allocator. Can save code size if you
+ * already use it.
+ */
+#ifndef MEM_LIBC_MALLOC
+#define MEM_LIBC_MALLOC 0
+#endif
+
+/**
+ * Use mem_malloc/mem_free instead of the lwip pool allocator.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#ifndef MEMP_MEM_MALLOC
+#define MEMP_MEM_MALLOC 0
+#endif
+
+/**
+ * MEM_ALIGNMENT: should be set to the alignment of the CPU
+ * \verbatim
+ * 4 byte alignment -> #define MEM_ALIGNMENT 4
+ * 2 byte alignment -> #define MEM_ALIGNMENT 2
+ * \endverbatim
+ */
+#ifndef MEM_ALIGNMENT
+#define MEM_ALIGNMENT 4
+#endif
+
+/**
+ * The size of the lwIP heap memory.
+ *
+ * If the application will send a lot of data that needs to be copied, this
+ * should be set high.
+ *
+ * $WIZ$ type = "int"; min = 1600
+ */
+#define MEM_SIZE 1600
+
+/**
+ * Dynamic pool memory overflow protection check level.
+ *
+ * MEMP_OVERFLOW_CHECK == 0 no checking
+ * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed
+ * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time
+ * memp_malloc() or memp_free() is called (useful but slow!)
+ *
+ * $WIZ$ type = "int"; min = "0"; max = "2"
+ */
+#define MEMP_OVERFLOW_CHECK 0
+
+/**
+ * Run a sanity check after each memp_free().
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define MEMP_SANITY_CHECK 0
+
+/**
+ * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set
+ * of memory pools of various sizes. When mem_malloc is called, an element of
+ * the smallest pool that can provide the length needed is returned.
+ * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled.
+ */
+#ifndef MEM_USE_POOLS
+#define MEM_USE_POOLS 0
+#endif
+
+/**
+ * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next
+ * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more
+ * reliable. */
+#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL
+#define MEM_USE_POOLS_TRY_BIGGER_POOL 0
+#endif
+
+/**
+ * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h
+ * that defines additional pools beyond the "standard" ones required
+ * by lwIP. If you set this to 1, you must have lwippools.h in your
+ * inlude path somewhere.
+ */
+#ifndef MEMP_USE_CUSTOM_POOLS
+#define MEMP_USE_CUSTOM_POOLS 0
+#endif
+
+/**
+ * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from
+ * interrupt context (or another context that doesn't allow waiting for a
+ * semaphore).
+ * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT,
+ * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs
+ * with each loop so that mem_free can run.
+ *
+ * ATTENTION: As you can see from the above description, this leads to dis-/
+ * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc
+ * can need longer.
+ *
+ * If you don't want that, at least for NO_SYS=0, you can still use the following
+ * functions to enqueue a deallocation call which then runs in the tcpip_thread
+ * context:
+ * - pbuf_free_callback(p);
+ * - mem_free_callback(m);
+ */
+#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT
+#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0
+#endif
+
+/*
+ ------------------------------------------------
+ ---------- Internal Memory Pool Sizes ----------
+ ------------------------------------------------
+*/
+/**
+ * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
+ * If the application sends a lot of data out of ROM (or other static memory),
+ * this should be set high.
+ */
+#ifndef MEMP_NUM_PBUF
+#define MEMP_NUM_PBUF 16
+#endif
+
+/**
+ * MEMP_NUM_RAW_PCB: Number of raw connection PCBs
+ * (requires the LWIP_RAW option)
+ */
+#ifndef MEMP_NUM_RAW_PCB
+#define MEMP_NUM_RAW_PCB 4
+#endif
+
+/**
+ * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
+ * per active UDP "connection".
+ * (requires the LWIP_UDP option)
+ */
+#ifndef MEMP_NUM_UDP_PCB
+#define MEMP_NUM_UDP_PCB 4
+#endif
+
+/**
+ * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_PCB
+#define MEMP_NUM_TCP_PCB 5
+#endif
+
+/**
+ * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_PCB_LISTEN
+#define MEMP_NUM_TCP_PCB_LISTEN 8
+#endif
+
+/**
+ * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_SEG
+#define MEMP_NUM_TCP_SEG 16
+#endif
+
+/**
+ * MEMP_NUM_REASSDATA: the number of simultaneously IP packets queued for
+ * reassembly (whole packets, not fragments!)
+ */
+#ifndef MEMP_NUM_REASSDATA
+#define MEMP_NUM_REASSDATA 5
+#endif
+
+/**
+ * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing
+ * packets (pbufs) that are waiting for an ARP request (to resolve
+ * their destination address) to finish.
+ * (requires the ARP_QUEUEING option)
+ */
+#ifndef MEMP_NUM_ARP_QUEUE
+#define MEMP_NUM_ARP_QUEUE 30
+#endif
+
+/**
+ * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces
+ * can be members et the same time (one per netif - allsystems group -, plus one
+ * per netif membership).
+ * (requires the LWIP_IGMP option)
+ */
+#ifndef MEMP_NUM_IGMP_GROUP
+#define MEMP_NUM_IGMP_GROUP 8
+#endif
+
+/**
+ * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
+ * (requires NO_SYS==0)
+ */
+#ifndef MEMP_NUM_SYS_TIMEOUT
+#define MEMP_NUM_SYS_TIMEOUT 8
+#endif
+
+/**
+ * MEMP_NUM_NETBUF: the number of struct netbufs.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#ifndef MEMP_NUM_NETBUF
+#define MEMP_NUM_NETBUF 2
+#endif
+
+/**
+ * MEMP_NUM_NETCONN: the number of struct netconns.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#ifndef MEMP_NUM_NETCONN
+#define MEMP_NUM_NETCONN 4
+#endif
+
+/**
+ * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used
+ * for callback/timeout API communication.
+ * (only needed if you use tcpip.c)
+ */
+#ifndef MEMP_NUM_TCPIP_MSG_API
+#define MEMP_NUM_TCPIP_MSG_API 8
+#endif
+
+/**
+ * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used
+ * for incoming packets.
+ * (only needed if you use tcpip.c)
+ */
+#ifndef MEMP_NUM_TCPIP_MSG_INPKT
+#define MEMP_NUM_TCPIP_MSG_INPKT 8
+#endif
+
+/**
+ * PBUF_POOL_SIZE: the number of buffers in the pbuf pool.
+ */
+#ifndef PBUF_POOL_SIZE
+#define PBUF_POOL_SIZE 16
+#endif
+
+/*
+ ---------------------------------
+ ---------- ARP options ----------
+ ---------------------------------
+*/
+/**
+ * LWIP_ARP==1: Enable ARP functionality.
+ */
+#ifndef LWIP_ARP
+#define LWIP_ARP 1
+#endif
+
+/**
+ * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached.
+ */
+#ifndef ARP_TABLE_SIZE
+#define ARP_TABLE_SIZE 10
+#endif
+
+/**
+ * ARP_QUEUEING==1: Outgoing packets are queued during hardware address
+ * resolution.
+ */
+#ifndef ARP_QUEUEING
+#define ARP_QUEUEING 1
+#endif
+
+/**
+ * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be
+ * updated with the source MAC and IP addresses supplied in the packet.
+ * You may want to disable this if you do not trust LAN peers to have the
+ * correct addresses, or as a limited approach to attempt to handle
+ * spoofing. If disabled, lwIP will need to make a new ARP request if
+ * the peer is not already in the ARP table, adding a little latency.
+ */
+#ifndef ETHARP_TRUST_IP_MAC
+#define ETHARP_TRUST_IP_MAC 1
+#endif
+
+/**
+ * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header.
+ * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check.
+ * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted.
+ * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted.
+ */
+#ifndef ETHARP_SUPPORT_VLAN
+#define ETHARP_SUPPORT_VLAN 0
+#endif
+
+/*
+ --------------------------------
+ ---------- IP options ----------
+ --------------------------------
+*/
+/**
+ * IP_FORWARD==1: Enables the ability to forward IP packets across network
+ * interfaces. If you are going to run lwIP on a device with only one network
+ * interface, define this to 0.
+ */
+#ifndef IP_FORWARD
+#define IP_FORWARD 0
+#endif
+
+/**
+ * IP_OPTIONS_ALLOWED: Defines the behavior for IP options.
+ * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped.
+ * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed).
+ */
+#ifndef IP_OPTIONS_ALLOWED
+#define IP_OPTIONS_ALLOWED 1
+#endif
+
+/**
+ * Reassemble incoming fragmented IP packets.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define IP_REASSEMBLY 1
+
+/**
+ * Fragment outgoing IP packets if their size exceeds MTU.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define IP_FRAG 1
+
+/**
+ * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
+ * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
+ * in this time, the whole packet is discarded.
+ */
+#ifndef IP_REASS_MAXAGE
+#define IP_REASS_MAXAGE 3
+#endif
+
+/**
+ * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
+ * Since the received pbufs are enqueued, be sure to configure
+ * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
+ * packets even if the maximum amount of fragments is enqueued for reassembly!
+ */
+#ifndef IP_REASS_MAX_PBUFS
+#define IP_REASS_MAX_PBUFS 10
+#endif
+
+/**
+ * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP
+ * fragmentation. Otherwise pbufs are allocated and reference the original
+ * packet data to be fragmented.
+ */
+#ifndef IP_FRAG_USES_STATIC_BUF
+#define IP_FRAG_USES_STATIC_BUF 1
+#endif
+
+/**
+ * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer
+ * (requires IP_FRAG_USES_STATIC_BUF==1)
+ */
+#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU)
+#define IP_FRAG_MAX_MTU 1500
+#endif
+
+/**
+ * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.
+ */
+#ifndef IP_DEFAULT_TTL
+#define IP_DEFAULT_TTL 255
+#endif
+
+/**
+ * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast
+ * filter per pcb on udp and raw send operations. To enable broadcast filter
+ * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1.
+ */
+#ifndef IP_SOF_BROADCAST
+#define IP_SOF_BROADCAST 0
+#endif
+
+/**
+ * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast
+ * filter on recv operations.
+ */
+#ifndef IP_SOF_BROADCAST_RECV
+#define IP_SOF_BROADCAST_RECV 0
+#endif
+
+/*
+ ----------------------------------
+ ---------- ICMP options ----------
+ ----------------------------------
+*/
+/**
+ * Enable ICMP module inside the IP stack.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_ICMP 1
+
+/**
+ * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
+ */
+#ifndef ICMP_TTL
+#define ICMP_TTL (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only)
+ */
+#ifndef LWIP_BROADCAST_PING
+#define LWIP_BROADCAST_PING 0
+#endif
+
+/**
+ * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only)
+ */
+#ifndef LWIP_MULTICAST_PING
+#define LWIP_MULTICAST_PING 0
+#endif
+
+/*
+ ---------------------------------
+ ---------- RAW options ----------
+ ---------------------------------
+*/
+/**
+ * Enable application layer to hook into the IP layer itself.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_RAW 1
+
+/**
+ * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
+ */
+#ifndef RAW_TTL
+#define RAW_TTL (IP_DEFAULT_TTL)
+#endif
+
+/*
+ ----------------------------------
+ ---------- DHCP options ----------
+ ----------------------------------
+*/
+/**
+ * Enable DHCP module. UDP must be also available.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_DHCP 1
+
+/**
+ * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
+ */
+#ifndef DHCP_DOES_ARP_CHECK
+#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP))
+#endif
+
+/*
+ ------------------------------------
+ ---------- AUTOIP options ----------
+ ------------------------------------
+*/
+/**
+ * LWIP_AUTOIP==1: Enable AUTOIP module.
+ */
+#ifndef LWIP_AUTOIP
+#define LWIP_AUTOIP 0
+#endif
+
+/**
+ * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
+ * the same interface at the same time.
+ */
+#ifndef LWIP_DHCP_AUTOIP_COOP
+#define LWIP_DHCP_AUTOIP_COOP 0
+#endif
+
+/**
+ * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
+ * that should be sent before falling back on AUTOIP. This can be set
+ * as low as 1 to get an AutoIP address very quickly, but you should
+ * be prepared to handle a changing IP address when DHCP overrides
+ * AutoIP.
+ */
+#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES
+#define LWIP_DHCP_AUTOIP_COOP_TRIES 9
+#endif
+
+/*
+ ----------------------------------
+ ---------- SNMP options ----------
+ ----------------------------------
+*/
+/**
+ * Turn on SNMP module. UDP must be also available.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_SNMP 0
+
+/**
+ * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will
+ * allow. At least one request buffer is required.
+ */
+#ifndef SNMP_CONCURRENT_REQUESTS
+#define SNMP_CONCURRENT_REQUESTS 1
+#endif
+
+/**
+ * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap
+ * destination is required
+ */
+#ifndef SNMP_TRAP_DESTINATIONS
+#define SNMP_TRAP_DESTINATIONS 1
+#endif
+
+/**
+ * SNMP_PRIVATE_MIB:
+ */
+#ifndef SNMP_PRIVATE_MIB
+#define SNMP_PRIVATE_MIB 0
+#endif
+
+/**
+ * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not
+ * a safe action and disabled when SNMP_SAFE_REQUESTS = 1).
+ * Unsafe requests are disabled by default!
+ */
+#ifndef SNMP_SAFE_REQUESTS
+#define SNMP_SAFE_REQUESTS 1
+#endif
+
+/*
+ ----------------------------------
+ ---------- IGMP options ----------
+ ----------------------------------
+*/
+/**
+ * Turn on IGMP module.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_IGMP 0
+
+/*
+ ----------------------------------
+ ---------- DNS options -----------
+ ----------------------------------
+*/
+/**
+ * Turn on DNS module. UDP must be available for DNS transport.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_DNS 0
+
+/** DNS maximum number of entries to maintain locally. */
+#ifndef DNS_TABLE_SIZE
+#define DNS_TABLE_SIZE 4
+#endif
+
+/** DNS maximum host name length supported in the name table. */
+#ifndef DNS_MAX_NAME_LENGTH
+#define DNS_MAX_NAME_LENGTH 256
+#endif
+
+/** The maximum of DNS servers */
+#ifndef DNS_MAX_SERVERS
+#define DNS_MAX_SERVERS 2
+#endif
+
+/** DNS do a name checking between the query and the response. */
+#ifndef DNS_DOES_NAME_CHECK
+#define DNS_DOES_NAME_CHECK 1
+#endif
+
+/** DNS use a local buffer if DNS_USES_STATIC_BUF=0, a static one if
+ DNS_USES_STATIC_BUF=1, or a dynamic one if DNS_USES_STATIC_BUF=2.
+ The buffer will be of size DNS_MSG_SIZE */
+#ifndef DNS_USES_STATIC_BUF
+#define DNS_USES_STATIC_BUF 1
+#endif
+
+/** DNS message max. size. Default value is RFC compliant. */
+#ifndef DNS_MSG_SIZE
+#define DNS_MSG_SIZE 512
+#endif
+
+/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled,
+ * you have to define
+ * \code
+ * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}}
+ * \endcode
+ * (an array of structs name/address, where address is an u32_t in network
+ * byte order).
+ *
+ * Instead, you can also use an external function:
+ * \code
+ * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name)
+ * \endcode
+ * that returns the IP address or INADDR_NONE if not found.
+ */
+#ifndef DNS_LOCAL_HOSTLIST
+#define DNS_LOCAL_HOSTLIST 0
+#endif /* DNS_LOCAL_HOSTLIST */
+
+/** If this is turned on, the local host-list can be dynamically changed
+ * at runtime. */
+#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC
+#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0
+#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */
+
+/*
+ ---------------------------------
+ ---------- UDP options ----------
+ ---------------------------------
+*/
+/**
+ * Turn on UDP.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_UDP 1
+
+/**
+ * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)
+ */
+#ifndef LWIP_UDPLITE
+#define LWIP_UDPLITE 0
+#endif
+
+/**
+ * UDP_TTL: Default Time-To-Live value.
+ */
+#ifndef UDP_TTL
+#define UDP_TTL (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf.
+ */
+#ifndef LWIP_NETBUF_RECVINFO
+#define LWIP_NETBUF_RECVINFO 0
+#endif
+
+/*
+ ---------------------------------
+ ---------- TCP options ----------
+ ---------------------------------
+*/
+/**
+ * Turn on TCP.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_TCP 1
+
+/**
+ * TCP_TTL: Default Time-To-Live value.
+ */
+#ifndef TCP_TTL
+#define TCP_TTL (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * TCP_WND: The size of a TCP window. This must be at least
+ * (2 * TCP_MSS) for things to work well
+ */
+#ifndef TCP_WND
+#define TCP_WND (4 * TCP_MSS)
+#endif
+
+/**
+ * TCP_MAXRTX: Maximum number of retransmissions of data segments.
+ */
+#ifndef TCP_MAXRTX
+#define TCP_MAXRTX 12
+#endif
+
+/**
+ * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
+ */
+#ifndef TCP_SYNMAXRTX
+#define TCP_SYNMAXRTX 6
+#endif
+
+/**
+ * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
+ * Define to 0 if your device is low on memory.
+ */
+#ifndef TCP_QUEUE_OOSEQ
+#define TCP_QUEUE_OOSEQ (LWIP_TCP)
+#endif
+
+/**
+ * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default,
+ * you might want to increase this.)
+ * For the receive side, this MSS is advertised to the remote side
+ * when opening a connection. For the transmit size, this MSS sets
+ * an upper limit on the MSS advertised by the remote host.
+ */
+#ifndef TCP_MSS
+#define TCP_MSS 536
+#endif
+
+/**
+ * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really
+ * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which
+ * reflects the available reassembly buffer size at the remote host) and the
+ * largest size permitted by the IP layer" (RFC 1122)
+ * Setting this to 1 enables code that checks TCP_MSS against the MTU of the
+ * netif used for a connection and limits the MSS if it would be too big otherwise.
+ */
+#ifndef TCP_CALCULATE_EFF_SEND_MSS
+#define TCP_CALCULATE_EFF_SEND_MSS 1
+#endif
+
+
+/**
+ * TCP_SND_BUF: TCP sender buffer space (bytes).
+ */
+#ifndef TCP_SND_BUF
+#define TCP_SND_BUF (2 * TCP_MSS)
+#endif
+
+/**
+ * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
+ * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work.
+ */
+#ifndef TCP_SND_QUEUELEN
+#define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF)/(TCP_MSS))
+#endif
+
+/**
+ * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than or equal
+ * to TCP_SND_BUF. It is the amount of space which must be available in the
+ * TCP snd_buf for select to return writable.
+ */
+#ifndef TCP_SNDLOWAT
+#define TCP_SNDLOWAT ((TCP_SND_BUF)/2)
+#endif
+
+/**
+ * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
+ */
+#ifndef TCP_LISTEN_BACKLOG
+#define TCP_LISTEN_BACKLOG 0
+#endif
+
+/**
+ * The maximum allowed backlog for TCP listen netconns.
+ * This backlog is used unless another is explicitly specified.
+ * 0xff is the maximum (u8_t).
+ */
+#ifndef TCP_DEFAULT_LISTEN_BACKLOG
+#define TCP_DEFAULT_LISTEN_BACKLOG 0xff
+#endif
+
+/**
+ * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option.
+ */
+#ifndef LWIP_TCP_TIMESTAMPS
+#define LWIP_TCP_TIMESTAMPS 0
+#endif
+
+/**
+ * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an
+ * explicit window update
+ */
+#ifndef TCP_WND_UPDATE_THRESHOLD
+#define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4)
+#endif
+
+/*
+ ----------------------------------
+ ---------- Pbuf options ----------
+ ----------------------------------
+*/
+/**
+ * PBUF_LINK_HLEN: the number of bytes that should be allocated for a
+ * link level header. The default is 14, the standard value for
+ * Ethernet.
+ */
+#ifndef PBUF_LINK_HLEN
+#define PBUF_LINK_HLEN 14
+#endif
+
+/**
+ * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is
+ * designed to accomodate single full size TCP frame in one pbuf, including
+ * TCP_MSS, IP header, and link header.
+ */
+#ifndef PBUF_POOL_BUFSIZE
+#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN)
+#endif
+
+/*
+ ------------------------------------------------
+ ---------- Network Interfaces options ----------
+ ------------------------------------------------
+*/
+/**
+ * Use DHCP_OPTION_HOSTNAME with netif's hostname field.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_NETIF_HOSTNAME 1
+
+/**
+ * Support netif api (in netifapi.c)
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_NETIF_API 0
+
+/**
+ * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface
+ * changes its up/down status (i.e., due to DHCP IP acquistion)
+ */
+#ifndef LWIP_NETIF_STATUS_CALLBACK
+#define LWIP_NETIF_STATUS_CALLBACK 0
+#endif
+
+/**
+ * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
+ * whenever the link changes (i.e., link down)
+ */
+#ifndef LWIP_NETIF_LINK_CALLBACK
+#define LWIP_NETIF_LINK_CALLBACK 0
+#endif
+
+/**
+ * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table
+ * indices) in struct netif. TCP and UDP can make use of this to prevent
+ * scanning the ARP table for every sent packet. While this is faster for big
+ * ARP tables or many concurrent connections, it might be counterproductive
+ * if you have a tiny ARP table or if there never are concurrent connections.
+ */
+#ifndef LWIP_NETIF_HWADDRHINT
+#define LWIP_NETIF_HWADDRHINT 0
+#endif
+
+/**
+ * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
+ * address equal to the netif IP address, looping them back up the stack.
+ */
+#ifndef LWIP_NETIF_LOOPBACK
+#define LWIP_NETIF_LOOPBACK 0
+#endif
+
+/**
+ * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
+ * sending for each netif (0 = disabled)
+ */
+#ifndef LWIP_LOOPBACK_MAX_PBUFS
+#define LWIP_LOOPBACK_MAX_PBUFS 0
+#endif
+
+/**
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in
+ * the system, as netifs must change how they behave depending on this setting
+ * for the LWIP_NETIF_LOOPBACK option to work.
+ * Setting this is needed to avoid reentering non-reentrant functions like
+ * tcp_input().
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a
+ * multithreaded environment like tcpip.c. In this case, netif->input()
+ * is called directly.
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup.
+ * The packets are put on a list and netif_poll() must be called in
+ * the main application loop.
+ */
+#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING
+#define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS)
+#endif
+
+/**
+ * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
+ * to be sent into one single pbuf. This is for compatibility with DMA-enabled
+ * MACs that do not support scatter-gather.
+ * Beware that this might involve CPU-memcpy before transmitting that would not
+ * be needed without this flag! Use this only if you need to!
+ *
+ * @todo: TCP and IP-frag do not work with this, yet:
+ */
+#ifndef LWIP_NETIF_TX_SINGLE_PBUF
+#define LWIP_NETIF_TX_SINGLE_PBUF 0
+#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
+
+/*
+ ------------------------------------
+ ---------- LOOPIF options ----------
+ ------------------------------------
+*/
+/**
+ * Support loop interface (127.0.0.1) and loopif.c
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_HAVE_LOOPIF 0
+
+/*
+ ------------------------------------
+ ---------- SLIPIF options ----------
+ ------------------------------------
+*/
+/**
+ * Support slip interface and slipif.c
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_HAVE_SLIPIF 0
+
+/*
+ ------------------------------------
+ ---------- Thread options ----------
+ ------------------------------------
+*/
+/**
+ * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
+ */
+#ifndef TCPIP_THREAD_NAME
+#define TCPIP_THREAD_NAME "tcpip_thread"
+#endif
+
+/**
+ * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef TCPIP_THREAD_STACKSIZE
+#define TCPIP_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3)
+#endif
+
+/**
+ * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef TCPIP_THREAD_PRIO
+#define TCPIP_THREAD_PRIO 0
+#endif
+
+/**
+ * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
+ * The queue size value itself is platform-dependent, but is passed to
+ * sys_mbox_new() when tcpip_init is called.
+ */
+#ifndef TCPIP_MBOX_SIZE
+#define TCPIP_MBOX_SIZE 0
+#endif
+
+/**
+ * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.
+ */
+#ifndef SLIPIF_THREAD_NAME
+#define SLIPIF_THREAD_NAME "slipif_loop"
+#endif
+
+/**
+ * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef SLIPIF_THREAD_STACKSIZE
+#define SLIPIF_THREAD_STACKSIZE 0
+#endif
+
+/**
+ * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef SLIPIF_THREAD_PRIO
+#define SLIPIF_THREAD_PRIO 1
+#endif
+
+/**
+ * PPP_THREAD_NAME: The name assigned to the pppMain thread.
+ */
+#ifndef PPP_THREAD_NAME
+#define PPP_THREAD_NAME "pppMain"
+#endif
+
+/**
+ * PPP_THREAD_STACKSIZE: The stack size used by the pppMain thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef PPP_THREAD_STACKSIZE
+#define PPP_THREAD_STACKSIZE 0
+#endif
+
+/**
+ * PPP_THREAD_PRIO: The priority assigned to the pppMain thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef PPP_THREAD_PRIO
+#define PPP_THREAD_PRIO 1
+#endif
+
+/**
+ * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.
+ */
+#ifndef DEFAULT_THREAD_NAME
+#define DEFAULT_THREAD_NAME "lwIP"
+#endif
+
+/**
+ * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef DEFAULT_THREAD_STACKSIZE
+#define DEFAULT_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3)
+#endif
+
+/**
+ * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef DEFAULT_THREAD_PRIO
+#define DEFAULT_THREAD_PRIO 1
+#endif
+
+/**
+ * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_RAW_RECVMBOX_SIZE
+#define DEFAULT_RAW_RECVMBOX_SIZE 0
+#endif
+
+/**
+ * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_UDP_RECVMBOX_SIZE
+#define DEFAULT_UDP_RECVMBOX_SIZE 0
+#endif
+
+/**
+ * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_TCP_RECVMBOX_SIZE
+#define DEFAULT_TCP_RECVMBOX_SIZE 0
+#endif
+
+/**
+ * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
+ * The queue size value itself is platform-dependent, but is passed to
+ * sys_mbox_new() when the acceptmbox is created.
+ */
+#ifndef DEFAULT_ACCEPTMBOX_SIZE
+#define DEFAULT_ACCEPTMBOX_SIZE 0
+#endif
+
+/*
+ ----------------------------------------------
+ ---------- Sequential layer options ----------
+ ----------------------------------------------
+*/
+/**
+ * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
+ * Don't use it if you're not an active lwIP project member
+ */
+#ifndef LWIP_TCPIP_CORE_LOCKING
+#define LWIP_TCPIP_CORE_LOCKING 0
+#endif
+
+/**
+ * Enable Netconn API (require to use api_lib.c)
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_NETCONN 1
+
+/*
+ ------------------------------------
+ ---------- Socket options ----------
+ ------------------------------------
+*/
+/**
+ * Enable Socket API (require to use sockets.c)
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_SOCKET 1
+#if LWIP_SOCKET
+ /*
+ * The sockets.c file requires this macro to be defined to really
+ * set errno on errors.
+ */
+ #define ERRNO
+#endif
+
+/**
+ * Enable BSD-style sockets functions names.
+ *
+ * NOTE: do not change this!!!
+ */
+#ifndef LWIP_COMPAT_SOCKETS
+#define LWIP_COMPAT_SOCKETS 0
+#endif
+
+/**
+ * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.
+ * Disable this option if you use a POSIX operating system that uses the same
+ * names (read, write & close). (only used if you use sockets.c)
+ */
+#ifndef LWIP_POSIX_SOCKETS_IO_NAMES
+#define LWIP_POSIX_SOCKETS_IO_NAMES 0
+#endif
+
+/**
+ * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
+ * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
+ * in seconds. (does not require sockets.c, and will affect tcp.c)
+ */
+#ifndef LWIP_TCP_KEEPALIVE
+#define LWIP_TCP_KEEPALIVE 0
+#endif
+
+/**
+ * LWIP_SO_RCVTIMEO==1: Enable SO_RCVTIMEO processing.
+ */
+#ifndef LWIP_SO_RCVTIMEO
+#define LWIP_SO_RCVTIMEO 0
+#endif
+
+/**
+ * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
+ */
+#ifndef LWIP_SO_RCVBUF
+#define LWIP_SO_RCVBUF 0
+#endif
+
+/**
+ * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
+ */
+#ifndef RECV_BUFSIZE_DEFAULT
+#define RECV_BUFSIZE_DEFAULT INT_MAX
+#endif
+
+/**
+ * SO_REUSE==1: Enable SO_REUSEADDR and SO_REUSEPORT options. DO NOT USE!
+ */
+#ifndef SO_REUSE
+#define SO_REUSE 0
+#endif
+
+/*
+ ----------------------------------------
+ ---------- Statistics options ----------
+ ----------------------------------------
+*/
+/**
+ * LWIP_STATS==1: Enable statistics collection in lwip_stats.
+ */
+#ifndef LWIP_STATS
+#define LWIP_STATS 0
+#endif
+
+#if LWIP_STATS
+
+/**
+ * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
+ */
+#ifndef LWIP_STATS_DISPLAY
+#define LWIP_STATS_DISPLAY 0
+#endif
+
+/**
+ * LINK_STATS==1: Enable link stats.
+ */
+#ifndef LINK_STATS
+#define LINK_STATS 1
+#endif
+
+/**
+ * ETHARP_STATS==1: Enable etharp stats.
+ */
+#ifndef ETHARP_STATS
+#define ETHARP_STATS (LWIP_ARP)
+#endif
+
+/**
+ * IP_STATS==1: Enable IP stats.
+ */
+#ifndef IP_STATS
+#define IP_STATS 1
+#endif
+
+/**
+ * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is
+ * on if using either frag or reass.
+ */
+#ifndef IPFRAG_STATS
+#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG)
+#endif
+
+/**
+ * ICMP_STATS==1: Enable ICMP stats.
+ */
+#ifndef ICMP_STATS
+#define ICMP_STATS 1
+#endif
+
+/**
+ * IGMP_STATS==1: Enable IGMP stats.
+ */
+#ifndef IGMP_STATS
+#define IGMP_STATS (LWIP_IGMP)
+#endif
+
+/**
+ * UDP_STATS==1: Enable UDP stats. Default is on if
+ * UDP enabled, otherwise off.
+ */
+#ifndef UDP_STATS
+#define UDP_STATS (LWIP_UDP)
+#endif
+
+/**
+ * TCP_STATS==1: Enable TCP stats. Default is on if TCP
+ * enabled, otherwise off.
+ */
+#ifndef TCP_STATS
+#define TCP_STATS (LWIP_TCP)
+#endif
+
+/**
+ * MEM_STATS==1: Enable mem.c stats.
+ */
+#ifndef MEM_STATS
+#define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0))
+#endif
+
+/**
+ * MEMP_STATS==1: Enable memp.c pool stats.
+ */
+#ifndef MEMP_STATS
+#define MEMP_STATS (MEMP_MEM_MALLOC == 0)
+#endif
+
+/**
+ * SYS_STATS==1: Enable system stats (sem and mbox counts, etc).
+ */
+#ifndef SYS_STATS
+#define SYS_STATS (NO_SYS == 0)
+#endif
+
+#else
+
+#define LINK_STATS 0
+#define ETHARP_STATS 0
+#define IP_STATS 0
+#define IPFRAG_STATS 0
+#define ICMP_STATS 0
+#define IGMP_STATS 0
+#define UDP_STATS 0
+#define TCP_STATS 0
+#define MEM_STATS 0
+#define MEMP_STATS 0
+#define SYS_STATS 0
+#define LWIP_STATS_DISPLAY 0
+
+#endif /* LWIP_STATS */
+
+/*
+ ---------------------------------
+ ---------- PPP options ----------
+ ---------------------------------
+*/
+/**
+ * Enable PPP.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define PPP_SUPPORT 0
+
+/**
+ * Enable PPP Over Ethernet.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define PPPOE_SUPPORT 0
+
+/**
+ * PPPOS_SUPPORT==1: Enable PPP Over Serial
+ */
+#ifndef PPPOS_SUPPORT
+#define PPPOS_SUPPORT PPP_SUPPORT
+#endif
+
+#if PPP_SUPPORT
+
+/**
+ * NUM_PPP: Max PPP sessions.
+ */
+#ifndef NUM_PPP
+#define NUM_PPP 1
+#endif
+
+/**
+ * PAP_SUPPORT==1: Support PAP.
+ */
+#ifndef PAP_SUPPORT
+#define PAP_SUPPORT 0
+#endif
+
+/**
+ * CHAP_SUPPORT==1: Support CHAP.
+ */
+#ifndef CHAP_SUPPORT
+#define CHAP_SUPPORT 0
+#endif
+
+/**
+ * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef MSCHAP_SUPPORT
+#define MSCHAP_SUPPORT 0
+#endif
+
+/**
+ * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef CBCP_SUPPORT
+#define CBCP_SUPPORT 0
+#endif
+
+/**
+ * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef CCP_SUPPORT
+#define CCP_SUPPORT 0
+#endif
+
+/**
+ * VJ_SUPPORT==1: Support VJ header compression.
+ */
+#ifndef VJ_SUPPORT
+#define VJ_SUPPORT 0
+#endif
+
+/**
+ * MD5_SUPPORT==1: Support MD5 (see also CHAP).
+ */
+#ifndef MD5_SUPPORT
+#define MD5_SUPPORT 0
+#endif
+
+/*
+ * Timeouts
+ */
+#ifndef FSM_DEFTIMEOUT
+#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */
+#endif
+
+#ifndef FSM_DEFMAXTERMREQS
+#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */
+#endif
+
+#ifndef FSM_DEFMAXCONFREQS
+#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */
+#endif
+
+#ifndef FSM_DEFMAXNAKLOOPS
+#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */
+#endif
+
+#ifndef UPAP_DEFTIMEOUT
+#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */
+#endif
+
+#ifndef UPAP_DEFREQTIME
+#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */
+#endif
+
+#ifndef CHAP_DEFTIMEOUT
+#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */
+#endif
+
+#ifndef CHAP_DEFTRANSMITS
+#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */
+#endif
+
+/* Interval in seconds between keepalive echo requests, 0 to disable. */
+#ifndef LCP_ECHOINTERVAL
+#define LCP_ECHOINTERVAL 0
+#endif
+
+/* Number of unanswered echo requests before failure. */
+#ifndef LCP_MAXECHOFAILS
+#define LCP_MAXECHOFAILS 3
+#endif
+
+/* Max Xmit idle time (in jiffies) before resend flag char. */
+#ifndef PPP_MAXIDLEFLAG
+#define PPP_MAXIDLEFLAG 100
+#endif
+
+/*
+ * Packet sizes
+ *
+ * Note - lcp shouldn't be allowed to negotiate stuff outside these
+ * limits. See lcp.h in the pppd directory.
+ * (XXX - these constants should simply be shared by lcp.c instead
+ * of living in lcp.h)
+ */
+#define PPP_MTU 1500 /* Default MTU (size of Info field) */
+#ifndef PPP_MAXMTU
+/* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */
+#define PPP_MAXMTU 1500 /* Largest MTU we allow */
+#endif
+#define PPP_MINMTU 64
+#define PPP_MRU 1500 /* default MRU = max length of info field */
+#define PPP_MAXMRU 1500 /* Largest MRU we allow */
+#ifndef PPP_DEFMRU
+#define PPP_DEFMRU 296 /* Try for this */
+#endif
+#define PPP_MINMRU 128 /* No MRUs below this */
+
+#ifndef MAXNAMELEN
+#define MAXNAMELEN 256 /* max length of hostname or name for auth */
+#endif
+#ifndef MAXSECRETLEN
+#define MAXSECRETLEN 256 /* max length of password or secret */
+#endif
+
+#endif /* PPP_SUPPORT */
+
+/*
+ --------------------------------------
+ ---------- Checksum options ----------
+ --------------------------------------
+*/
+/**
+ * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.
+ */
+#ifndef CHECKSUM_GEN_IP
+#define CHECKSUM_GEN_IP 1
+#endif
+
+/**
+ * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.
+ */
+#ifndef CHECKSUM_GEN_UDP
+#define CHECKSUM_GEN_UDP 1
+#endif
+
+/**
+ * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.
+ */
+#ifndef CHECKSUM_GEN_TCP
+#define CHECKSUM_GEN_TCP 1
+#endif
+
+/**
+ * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.
+ */
+#ifndef CHECKSUM_CHECK_IP
+#define CHECKSUM_CHECK_IP 1
+#endif
+
+/**
+ * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.
+ */
+#ifndef CHECKSUM_CHECK_UDP
+#define CHECKSUM_CHECK_UDP 1
+#endif
+
+/**
+ * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.
+ */
+#ifndef CHECKSUM_CHECK_TCP
+#define CHECKSUM_CHECK_TCP 1
+#endif
+
+/*
+ ---------------------------------------
+ ---------- Debugging options ----------
+ ---------------------------------------
+*/
+
+#ifdef _DEBUG
+#define LWIP_DEBUG
+#endif
+
+/**
+ * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is
+ * compared against this value. If it is smaller, then debugging
+ * messages are written.
+ */
+#ifndef LWIP_DBG_MIN_LEVEL
+#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL
+#endif
+
+/**
+ * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable
+ * debug messages of certain types.
+ */
+#ifndef LWIP_DBG_TYPES_ON
+#define LWIP_DBG_TYPES_ON LWIP_DBG_ON
+#endif
+
+/**
+ * ETHARP_DEBUG: Enable debugging in etharp.c.
+ */
+#ifndef ETHARP_DEBUG
+#define ETHARP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * NETIF_DEBUG: Enable debugging in netif.c.
+ */
+#ifndef NETIF_DEBUG
+#define NETIF_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * PBUF_DEBUG: Enable debugging in pbuf.c.
+ */
+#ifndef PBUF_DEBUG
+#define PBUF_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * API_LIB_DEBUG: Enable debugging in api_lib.c.
+ */
+#ifndef API_LIB_DEBUG
+#define API_LIB_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * API_MSG_DEBUG: Enable debugging in api_msg.c.
+ */
+#ifndef API_MSG_DEBUG
+#define API_MSG_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SOCKETS_DEBUG: Enable debugging in sockets.c.
+ */
+#ifndef SOCKETS_DEBUG
+#define SOCKETS_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * ICMP_DEBUG: Enable debugging in icmp.c.
+ */
+#ifndef ICMP_DEBUG
+#define ICMP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * IGMP_DEBUG: Enable debugging in igmp.c.
+ */
+#ifndef IGMP_DEBUG
+#define IGMP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * INET_DEBUG: Enable debugging in inet.c.
+ */
+#ifndef INET_DEBUG
+#define INET_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * IP_DEBUG: Enable debugging for IP.
+ */
+#ifndef IP_DEBUG
+#define IP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass.
+ */
+#ifndef IP_REASS_DEBUG
+#define IP_REASS_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * RAW_DEBUG: Enable debugging in raw.c.
+ */
+#ifndef RAW_DEBUG
+#define RAW_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * MEM_DEBUG: Enable debugging in mem.c.
+ */
+#ifndef MEM_DEBUG
+#define MEM_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * MEMP_DEBUG: Enable debugging in memp.c.
+ */
+#ifndef MEMP_DEBUG
+#define MEMP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SYS_DEBUG: Enable debugging in sys.c.
+ */
+#ifndef SYS_DEBUG
+#define SYS_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_DEBUG: Enable debugging for TCP.
+ */
+#ifndef TCP_DEBUG
+#define TCP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
+ */
+#ifndef TCP_INPUT_DEBUG
+#define TCP_INPUT_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit.
+ */
+#ifndef TCP_FR_DEBUG
+#define TCP_FR_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit
+ * timeout.
+ */
+#ifndef TCP_RTO_DEBUG
+#define TCP_RTO_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_CWND_DEBUG: Enable debugging for TCP congestion window.
+ */
+#ifndef TCP_CWND_DEBUG
+#define TCP_CWND_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating.
+ */
+#ifndef TCP_WND_DEBUG
+#define TCP_WND_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
+ */
+#ifndef TCP_OUTPUT_DEBUG
+#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_RST_DEBUG: Enable debugging for TCP with the RST message.
+ */
+#ifndef TCP_RST_DEBUG
+#define TCP_RST_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths.
+ */
+#ifndef TCP_QLEN_DEBUG
+#define TCP_QLEN_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * UDP_DEBUG: Enable debugging in UDP.
+ */
+#ifndef UDP_DEBUG
+#define UDP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCPIP_DEBUG: Enable debugging in tcpip.c.
+ */
+#ifndef TCPIP_DEBUG
+#define TCPIP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * PPP_DEBUG: Enable debugging for PPP.
+ */
+#ifndef PPP_DEBUG
+#define PPP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SLIP_DEBUG: Enable debugging in slipif.c.
+ */
+#ifndef SLIP_DEBUG
+#define SLIP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * DHCP_DEBUG: Enable debugging in dhcp.c.
+ */
+#ifndef DHCP_DEBUG
+#define DHCP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * AUTOIP_DEBUG: Enable debugging in autoip.c.
+ */
+#ifndef AUTOIP_DEBUG
+#define AUTOIP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SNMP_MSG_DEBUG: Enable debugging for SNMP messages.
+ */
+#ifndef SNMP_MSG_DEBUG
+#define SNMP_MSG_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs.
+ */
+#ifndef SNMP_MIB_DEBUG
+#define SNMP_MIB_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * DNS_DEBUG: Enable debugging for DNS.
+ */
+#ifndef DNS_DEBUG
+#define DNS_DEBUG LWIP_DBG_OFF
+#endif
+
+/* Custom definitions: !!!DO NOT CHANGE THIS SECTION!!! */
+#define LWIP_TIMEVAL_PRIVATE 0
+
+#endif /* CFG_LWIP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \author Stefano Fedrigo <aleph@develer.com>
+ *
+ * \brief Configuration file for NAND driver module.
+ */
+
+#ifndef CFG_NAND_H
+#define CFG_NAND_H
+
+/**
+ * Page data size
+ *
+ * Size of the data section of a programmable page in bytes.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_DATA_SIZE 2048
+
+/**
+ * Page spare area size
+ *
+ * Size of the spare section of a programmable page in bytes.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_SPARE_SIZE 64
+
+/**
+ * Pages per block
+ *
+ * Number of pages in a erase block.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_PAGES_PER_BLOCK 64
+
+/**
+ * Number of blocks
+ *
+ * Total number of erase blocks in one NAND chip.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_NUM_BLOCK 2048
+
+/**
+ * Number of reserved blocks
+ *
+ * Blocks reserved for remapping defective NAND blocks.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_NUM_REMAP_BLOCKS 128
+
+/**
+ * NAND operations timeout
+ *
+ * How many milliseconds the cpu waits for
+ * completion of NAND operations.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_TMOUT 100
+
+/**
+ * Module logging level
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define CONFIG_NAND_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define CONFIG_NAND_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_NAND_H */
#ifndef CFG_PARSER_H
#define CFG_PARSER_H
+/**
+ * Max number of arguments and results for each command
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_PARSER_MAX_ARGS 4
+
+/**
+ * Max number of commands
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 8
+ */
+#define CONFIG_MAX_COMMANDS_NUMBER 16
+/**
+ * Enable compatibility behaviour.
+ *
+ * Skip the first word from incoming commands. Don't enable in new projects.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_ENABLE_COMPAT_BEHAVIOUR 1
#endif /* CFG_PARSER_H */
*/
#define CONFIG_KERN_PRI 1
+/**
+ * Priority-inheritance protocol.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_KERN_PRI_INHERIT 0
+
/**
* Dynamic memory allocation for processes.
* $WIZ$ type = "boolean"
*/
#define PWM_LOG_FORMAT LOG_FMT_VERBOSE
+/**
+ * Enable the OLD pwm API.
+ * Not recommended for new projects.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CFG_PWM_ENABLE_OLD_API 1
+
#endif /* CFG_PWM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the "random" module
+ */
+
+#ifndef CFG_RANDOM_H
+#define CFG_RANDOM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define RANDOM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define RANDOM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Random security level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "random_level"
+ */
+#define RANDOM_SECURITY_LEVEL RANDOM_SECURITY_MINIMUM
+
+#endif /* CFG_RANDOM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file Secure Digital module.
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef CFG_SD_H
+#define CFG_SD_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define SD_LOG_LEVEL LOG_LVL_ERR
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define SD_LOG_FORMAT LOG_FMT_VERBOSE
+
+
+/**
+ * Enable autoassignment of SD driver to disk drive number 0 of FatFs module.
+ * $WIZ$ type = "boolean"
+ * $WIZ$ conditional_deps = "fat"
+ */
+#define CONFIG_SD_AUTOASSIGN_FAT 1
+
+/**
+ * SD bus mode.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sd_mode"
+ */
+#define CONFIG_SD_MODE SD_SPI_MODE
+
+/**
+ * Enable backward compatibility for sd_init().
+ * If enabled, sd_init() will allocate internally an Sd context,
+ * otherwise sd_init() will need the context to be passed explicitly.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_SD_OLD_INIT 1
+
+#endif /* CFG_SD_H */
*
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_order_bit"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
/**
* SPI clock division factor.
* $WIZ$ type = "int"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_CLOCK_DIV 16
* SPI clock polarity: normal low or normal high.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_pol"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
* sample on second clock edge.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_phase"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
--- /dev/null
+#ifndef CFG_TFTP_H
+#define CFG_TFTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define TFTP_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define TFTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+#endif /* CFG_TFTP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the USB driver module
+ */
+
+#ifndef CFG_USB_H
+#define CFG_USB_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define USB_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define USB_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Size of the USB buffer used for endpoint transfers [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
+#define CONFIG_USB_BUFSIZE 64
+
+/**
+ * Maximum number of USB device interfaces (default = 1).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_USB_INTERFACE_MAX 1
+
+/**
+ * Maximum number of allocated endpoints (0 = auto).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_USB_EP_MAX 0
+
+/**
+ * Maximum packet size of the control endpoint 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 8
+ */
+#define CONFIG_EP0_MAX_SIZE 8
+
+#endif /* CFG_USB_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the usbkbd driver module
+ */
+
+#ifndef CFG_USBKBD_H
+#define CFG_USBKBD_H
+
+/**
+ * Enable the usbkbd module.
+ *
+ * $WIZ$ type = "autoenabled"
+ */
+#define CONFIG_USBKBD 0
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define USB_KEYBOARD_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define USB_KEYBOARD_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * USB vendor ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_KEYBOARD_VENDOR_ID 0x046d
+
+/**
+ * USB product ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_KEYBOARD_PRODUCT_ID 0xffff
+
+#endif /* CFG_USB_KEYBOARD_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the usbmouse driver module
+ */
+
+#ifndef CFG_USBMOUSE_H
+#define CFG_USBMOUSE_H
+
+/**
+ * Enable the usbmouse module.
+ *
+ * $WIZ$ type = "autoenabled"
+ */
+#define CONFIG_USBMOUSE 0
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define USB_MOUSE_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define USB_MOUSE_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * USB vendor ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_MOUSE_VENDOR_ID 0xffff
+
+/**
+ * USB product ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_MOUSE_PRODUCT_ID 0x0000
+
+#endif /* CFG_USBMOUSE_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the USB serial driver module
+ */
+
+#ifndef CFG_USBSER_H
+#define CFG_USBSER_H
+
+/**
+ * Enable the usb-serial module.
+ *
+ * $WIZ$ type = "autoenabled"
+ */
+#define CONFIG_USBSER 0
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define USB_SERIAL_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define USB_SERIAL_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * USB vendor ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_SERIAL_VENDOR_ID 0x05f9
+
+/**
+ * USB product ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_SERIAL_PRODUCT_ID 0xffff
+
+#endif /* CFG_USBSER_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the WM8731 module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_WM8731_H
+#define CFG_WM8731_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define WM8731_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define WM8731_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * Digital control: ADC High pass filter
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DAPC 0
+
+
+/**
+ * Digital control: De-emphasis control
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_deemp"
+ */
+#define CONFIG_WM8731_DEEMP WM8731_DEEMP_DISABLE
+
+/**
+ * Digital control: DAC soft mute control
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DACMU 0
+
+
+/**
+ * Analog control: Microphone boost
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MICBOOST 0
+
+/**
+ * Analog control: Microphone/Line Input select to ADC
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_insel"
+ */
+#define CONFIG_WM8731_INSEL WM8731_INSEL_MIC
+
+
+/**
+ * Analog control: out selector
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_bypass"
+ */
+#define CONFIG_WM8731_BYPASS WM8731_DACSEL
+
+/**
+ * Analog control: Side tone attenuation
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_sideatt"
+ */
+#define CONFIG_WM8731_SIDEATT WM8731_SIDEATT_6dB
+
+
+/**
+ * Digital Audio interface format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_fmt"
+ */
+#define CONFIG_WM8731_INTERFACE_FORMAT WM8731_FORMAT_I2S
+
+/**
+ * Digital Audio data bit length.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_databit"
+ */
+#define CONFIG_WM8731_IWL_BITS WM8731_IWL_16_BIT
+
+/**
+ * Enable Master mode.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MS 0
+
+
+/**
+ * Data sampling rate, refer to datasheet for this value.
+ * $WIZ$ type = "hex"
+ */
+#define CONFIG_WM8731_SAMPLING_RATES 0x6
+
+#endif /* CFG_WM8731_H */
p4
sS'WIZARD_VERSION'
p5
-I3
+I4
sS'PROJECT_NAME'
p6
-Vkernel_footprint
+Vstm32-p103_kernel_footprint
p7
sS'TOOLCHAIN'
p8
(dp9
-Vtarget
+S'path'
p10
-Varm-none-eabi
+Varm-none-eabi-gcc
p11
-sVthread
+ssS'PROJECT_SRC_PATH_FROM_MAKEFILE'
p12
-Vsingle
+Vboards/stm32-p103/benchmark/stm32-p103_kernel_footprint
p13
-sVconfigured
+sS'ENABLED_MODULES'
p14
-V/scratch/julian/2010q1-release-eabi-lite/src/gcc-4.4-2010q1/configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=arm-none-eabi --enable-threads --disable-libmudflap --disable-libssp --disable-libstdcxx-pch --enable-extra-sgxxlite-multilibs --with-gnu-as --with-gnu-ld --with-specs='%{O2:%{!fno-remove-local-statics: -fremove-local-statics}} %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: -fremove-local-statics}}}' --enable-languages=c,c++ --disable-shared --disable-lto --with-newlib --with-pkgversion='Sourcery G++ Lite 2010q1-188' --with-bugurl=https://support.codesourcery.com/GNUToolchain/ --disable-nls --prefix=/opt/codesourcery --with-headers=yes --with-sysroot=/opt/codesourcery/arm-none-eabi --with-build-sysroot=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi --with-gmp=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-mpfr=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-ppl=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-cloog=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --disable-libgomp --enable-poison-system-directories --with-build-time-tools=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi/bin --with-build-time-tools=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi/bin
-p15
-sVversion
+(lp15
+S'formatwr'
p16
-V4.4.1
+aS'heap'
p17
-sVbuild
+aS'kernel'
p18
-VSourcery G++ Lite 2010q1-188
+aS'kernel_footprint'
p19
-sVpath
+aS'kfile'
p20
-V/opt/sourcery/bin/arm-none-eabi-gcc
+aS'msg'
p21
-ssS'ENABLED_MODULES'
+aS'semaphores'
p22
-(lp23
-S'kernel'
+aS'signal'
+p23
+aS'timer'
p24
-aS'semaphores'
+asS'CPU_NAME'
p25
-aS'formatwr'
+VSTM32F103RB
p26
-aS'kfile'
+sS'PROJECT_HW_PATH'
p27
-aS'msg'
+S'../..'
p28
-aS'kernel_footprint'
+sS'PROJECT_SRC_PATH'
p29
-aS'heap'
+S'.'
p30
-aS'signal'
+sS'PRESET'
p31
-aS'timer'
+I01
+sS'PROJECT_HW_PATH_FROM_MAKEFILE'
p32
-asS'CPU_NAME'
+Vboards/stm32-p103
p33
-VSTM32F103RB
+sS'OUTPUT'
p34
-sS'PROJECT_HW_PATH'
-p35
-S'../..'
+(lp35
+S'codelite'
p36
-sS'PROJECT_SRC_PATH'
-p37
-S'.'
-p38
-sS'PRESET'
-p39
-I01
-sS'OUTPUT'
-p40
-(lp41
-s.
+as.
\ No newline at end of file
#
# Wizard autogenerated makefile.
-# DO NOT EDIT, use the kernel_footprint_user.mk file instead.
+# DO NOT EDIT, use the stm32-p103_kernel_footprint_user.mk file instead.
#
# Constants automatically defined by the selected modules
# Our target application
-TRG += kernel_footprint
+TRG += stm32-p103_kernel_footprint
-kernel_footprint_PREFIX = "arm-none-eabi-"
+stm32-p103_kernel_footprint_PREFIX = "arm-none-eabi-"
-kernel_footprint_SUFFIX = ""
+stm32-p103_kernel_footprint_SUFFIX = ""
-kernel_footprint_SRC_PATH = boards/stm32-p103/benchmark/kernel_footprint
+stm32-p103_kernel_footprint_SRC_PATH = boards/stm32-p103/benchmark/stm32-p103_kernel_footprint
-kernel_footprint_HW_PATH = boards/stm32-p103
+stm32-p103_kernel_footprint_HW_PATH = boards/stm32-p103
-# Files automatically generated by the wizard. DO NOT EDIT, USE kernel_footprint_USER_CSRC INSTEAD!
-kernel_footprint_WIZARD_CSRC = \
- bertos/cpu/cortex-m3/hw/switch_ctx_cm3.c \
- bertos/mware/event.c \
- bertos/kern/sem.c \
+# Files automatically generated by the wizard. DO NOT EDIT, USE stm32-p103_kernel_footprint_USER_CSRC INSTEAD!
+stm32-p103_kernel_footprint_WIZARD_CSRC = \
+ bertos/benchmark/kernel_footprint.c \
bertos/cpu/cortex-m3/drv/timer_cm3.c \
- bertos/struct/heap.c \
- bertos/mware/formatwr.c \
+ bertos/cpu/cortex-m3/hw/switch_ctx_cm3.c \
bertos/drv/timer.c \
bertos/io/kfile.c \
bertos/kern/proc.c \
- bertos/benchmark/kernel_footprint.c \
- bertos/mware/hex.c \
+ bertos/kern/sem.c \
bertos/kern/signal.c \
+ bertos/mware/event.c \
+ bertos/mware/formatwr.c \
+ bertos/mware/hex.c \
+ bertos/struct/heap.c \
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE kernel_footprint_USER_PCSRC INSTEAD!
-kernel_footprint_WIZARD_PCSRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE stm32-p103_kernel_footprint_USER_PCSRC INSTEAD!
+stm32-p103_kernel_footprint_WIZARD_PCSRC = \
\
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE kernel_footprint_USER_CPPASRC INSTEAD!
-kernel_footprint_WIZARD_CPPASRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE stm32-p103_kernel_footprint_USER_CPPASRC INSTEAD!
+stm32-p103_kernel_footprint_WIZARD_CPPASRC = \
\
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE kernel_footprint_USER_CXXSRC INSTEAD!
-kernel_footprint_WIZARD_CXXSRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE stm32-p103_kernel_footprint_USER_CXXSRC INSTEAD!
+stm32-p103_kernel_footprint_WIZARD_CXXSRC = \
\
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE kernel_footprint_USER_ASRC INSTEAD!
-kernel_footprint_WIZARD_ASRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE stm32-p103_kernel_footprint_USER_ASRC INSTEAD!
+stm32-p103_kernel_footprint_WIZARD_ASRC = \
\
#
-kernel_footprint_CPPFLAGS = -D'CPU_FREQ=(72000000UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -I$(kernel_footprint_HW_PATH) -I$(kernel_footprint_SRC_PATH) $(kernel_footprint_CPU_CPPFLAGS) $(kernel_footprint_USER_CPPFLAGS)
+stm32-p103_kernel_footprint_CPPFLAGS = -D'CPU_FREQ=(72000000UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -I$(stm32-p103_kernel_footprint_HW_PATH) -I$(stm32-p103_kernel_footprint_SRC_PATH) $(stm32-p103_kernel_footprint_CPU_CPPFLAGS) $(stm32-p103_kernel_footprint_USER_CPPFLAGS)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-kernel_footprint_LDFLAGS = $(kernel_footprint_CPU_LDFLAGS) $(kernel_footprint_WIZARD_LDFLAGS) $(kernel_footprint_USER_LDFLAGS)
+stm32-p103_kernel_footprint_LDFLAGS = $(stm32-p103_kernel_footprint_CPU_LDFLAGS) $(stm32-p103_kernel_footprint_WIZARD_LDFLAGS) $(stm32-p103_kernel_footprint_USER_LDFLAGS)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-kernel_footprint_CPPAFLAGS = $(kernel_footprint_CPU_CPPAFLAGS) $(kernel_footprint_WIZARD_CPPAFLAGS) $(kernel_footprint_USER_CPPAFLAGS)
+stm32-p103_kernel_footprint_CPPAFLAGS = $(stm32-p103_kernel_footprint_CPU_CPPAFLAGS) $(stm32-p103_kernel_footprint_WIZARD_CPPAFLAGS) $(stm32-p103_kernel_footprint_USER_CPPAFLAGS)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-kernel_footprint_CSRC = $(kernel_footprint_CPU_CSRC) $(kernel_footprint_WIZARD_CSRC) $(kernel_footprint_USER_CSRC)
+stm32-p103_kernel_footprint_CSRC = $(stm32-p103_kernel_footprint_CPU_CSRC) $(stm32-p103_kernel_footprint_WIZARD_CSRC) $(stm32-p103_kernel_footprint_USER_CSRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-kernel_footprint_PCSRC = $(kernel_footprint_CPU_PCSRC) $(kernel_footprint_WIZARD_PCSRC) $(kernel_footprint_USER_PCSRC)
+stm32-p103_kernel_footprint_PCSRC = $(stm32-p103_kernel_footprint_CPU_PCSRC) $(stm32-p103_kernel_footprint_WIZARD_PCSRC) $(stm32-p103_kernel_footprint_USER_PCSRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-kernel_footprint_CPPASRC = $(kernel_footprint_CPU_CPPASRC) $(kernel_footprint_WIZARD_CPPASRC) $(kernel_footprint_USER_CPPASRC)
+stm32-p103_kernel_footprint_CPPASRC = $(stm32-p103_kernel_footprint_CPU_CPPASRC) $(stm32-p103_kernel_footprint_WIZARD_CPPASRC) $(stm32-p103_kernel_footprint_USER_CPPASRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-kernel_footprint_CXXSRC = $(kernel_footprint_CPU_CXXSRC) $(kernel_footprint_WIZARD_CXXSRC) $(kernel_footprint_USER_CXXSRC)
+stm32-p103_kernel_footprint_CXXSRC = $(stm32-p103_kernel_footprint_CPU_CXXSRC) $(stm32-p103_kernel_footprint_WIZARD_CXXSRC) $(stm32-p103_kernel_footprint_USER_CXXSRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-kernel_footprint_ASRC = $(kernel_footprint_CPU_ASRC) $(kernel_footprint_WIZARD_ASRC) $(kernel_footprint_USER_ASRC)
+stm32-p103_kernel_footprint_ASRC = $(stm32-p103_kernel_footprint_CPU_ASRC) $(stm32-p103_kernel_footprint_WIZARD_ASRC) $(stm32-p103_kernel_footprint_USER_ASRC)
# CPU specific flags and options, defined in the CPU definition files.
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-kernel_footprint_CPU_CPPASRC = bertos/cpu/cortex-m3/hw/crt_cm3.S bertos/cpu/cortex-m3/hw/vectors_cm3.S
-kernel_footprint_CPU_CPPAFLAGS = -g -gdwarf-2 -mthumb -mno-thumb-interwork
-kernel_footprint_CPU_CPPFLAGS = -O0 -g3 -gdwarf-2 -mthumb -mno-thumb-interwork -fno-strict-aliasing -fwrapv -fverbose-asm -Ibertos/cpu/cortex-m3/ -D__ARM_STM32P103__
-kernel_footprint_CPU_CSRC = bertos/cpu/cortex-m3/hw/init_cm3.c bertos/cpu/cortex-m3/drv/irq_cm3.c bertos/cpu/cortex-m3/drv/gpio_stm32.c bertos/cpu/cortex-m3/drv/clock_stm32.c
-kernel_footprint_PROGRAMMER_CPU = stm32
-kernel_footprint_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
-kernel_footprint_CPU = cortex-m3
-kernel_footprint_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
-kernel_footprint_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh
-kernel_footprint_CPU_LDFLAGS = -mthumb -mno-thumb-interwork -nostartfiles -Wl,--no-warn-mismatch -T bertos/cpu/cortex-m3/scripts/stm32p103_rom.ld
-kernel_footprint_FLASH_SCRIPT = bertos/prg_scripts/arm/flash-stm32.sh
-
-include $(kernel_footprint_SRC_PATH)/kernel_footprint_user.mk
+stm32-p103_kernel_footprint_CPU_CPPASRC = bertos/cpu/cortex-m3/hw/crt_cm3.S bertos/cpu/cortex-m3/hw/vectors_cm3.S
+stm32-p103_kernel_footprint_CPU_CPPAFLAGS = -g -gdwarf-2 -mthumb -mno-thumb-interwork
+stm32-p103_kernel_footprint_CPU_CPPFLAGS = -O0 -g3 -gdwarf-2 -mthumb -mno-thumb-interwork -fno-strict-aliasing -fwrapv -fverbose-asm -Ibertos/cpu/cortex-m3/ -D__ARM_STM32F103RB__
+stm32-p103_kernel_footprint_CPU_CSRC = bertos/cpu/cortex-m3/hw/init_cm3.c bertos/cpu/cortex-m3/drv/irq_cm3.c bertos/cpu/cortex-m3/drv/gpio_stm32.c bertos/cpu/cortex-m3/drv/clock_stm32.c
+stm32-p103_kernel_footprint_PROGRAMMER_CPU = stm32
+stm32-p103_kernel_footprint_CPU_LDFLAGS = -mthumb -mno-thumb-interwork -nostartfiles -Wl,--no-warn-mismatch -Wl,-dT bertos/cpu/cortex-m3/scripts/stm32f103rb_rom.ld
+stm32-p103_kernel_footprint_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
+stm32-p103_kernel_footprint_CPU = cortex-m3
+stm32-p103_kernel_footprint_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
+stm32-p103_kernel_footprint_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh
+stm32-p103_kernel_footprint_FLASH_SCRIPT = bertos/prg_scripts/arm/flash-stm32.sh
+
+include $(stm32-p103_kernel_footprint_SRC_PATH)/stm32-p103_kernel_footprint_user.mk
#
# Programmer interface configuration, see http://dev.bertos.org/wiki/ProgrammerInterface for help
-kernel_footprint_PROGRAMMER_TYPE = none
-kernel_footprint_PROGRAMMER_PORT = none
+stm32-p103_kernel_footprint_PROGRAMMER_TYPE = none
+stm32-p103_kernel_footprint_PROGRAMMER_PORT = none
# Files included by the user.
-kernel_footprint_USER_CSRC = \
- $(kernel_footprint_SRC_PATH)/main.c \
+stm32-p103_kernel_footprint_USER_CSRC = \
+ $(stm32-p103_kernel_footprint_SRC_PATH)/main.c \
#
# Files included by the user.
-kernel_footprint_USER_PCSRC = \
+stm32-p103_kernel_footprint_USER_PCSRC = \
#
# Files included by the user.
-kernel_footprint_USER_CPPASRC = \
+stm32-p103_kernel_footprint_USER_CPPASRC = \
#
# Files included by the user.
-kernel_footprint_USER_CXXSRC = \
+stm32-p103_kernel_footprint_USER_CXXSRC = \
#
# Files included by the user.
-kernel_footprint_USER_ASRC = \
+stm32-p103_kernel_footprint_USER_ASRC = \
#
# Flags included by the user.
-kernel_footprint_USER_LDFLAGS = \
+stm32-p103_kernel_footprint_USER_LDFLAGS = \
#
# Flags included by the user.
-kernel_footprint_USER_CPPAFLAGS = \
+stm32-p103_kernel_footprint_USER_CPPAFLAGS = \
#
# Flags included by the user.
-kernel_footprint_USER_CPPFLAGS = \
+stm32-p103_kernel_footprint_USER_CPPFLAGS = \
-fno-strict-aliasing \
-fwrapv \
#
projects / bertos.git / commitdiff