Remove obsolete file.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@532 38d2e660-2303-0410-9eaa-f027e97ec537

diff --git a/cfg/config_template.h b/cfg/config_template.h
deleted file mode 100755 (executable)
index 52705ec..0000000
--- a/cfg/config_template.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*!
- * \file
- * <!--
- * Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief DevLib configuration options
- *
- * You should copy this header in your project and rename it to
- * "config.h" and delete the CONFIG_ macros for the modules
- * you're not using.
- *
- * <h2>Working with multiple applications</h2>
- *
- * If your project is made of multiple DevLib-based applications,
- * create a custom "config.h" file in each application subdirectory
- * and play with the compiler include path to get the desired result.
- * You can share common options by creationg a "config_common.h" header
- * and including it from all your "config.h" copies.
- *
- * <h2>Configuration style</h2>
- *
- * For improved compile-time checking of configuration options,
- * the preferred way to use a \c CONFIG_ symbol is keeping it
- * always defined with a value of either 0 or 1.  This lets
- * you write tests like this:
- *
- * \code
- *  #if CONFIG_FOO
- *  void foo(void)
- *  {
- *      if (CONFIG_BAR)
- *          bar();
- *  }
- *  #endif // CONFIG_FOO
- * \endcode
- *
- * In most cases, we rely on the optimizer to discard checks
- * on constant values and performing dead-code elimination.
- *
- * \version $Id$
- * \author Bernardo Innocenti <bernie@develer.com>
- * \author Stefano Fedrigo <aleph@develer.com>
- */
-
-/*#*
- *#* $Log$
- *#* Revision 1.1  2005/04/11 19:04:13  bernie
- *#* Move top-level headers to cfg/ subdir.
- *#*
- *#* Revision 1.5  2004/12/08 08:04:28  bernie
- *#* Add missing config options.
- *#*
- *#* Revision 1.4  2004/08/25 14:12:08  rasky
- *#* Aggiornato il comment block dei log RCS
- *#*
- *#* Revision 1.3  2004/08/24 14:30:11  bernie
- *#* Use new-style config macros for drv/timer.c
- *#*
- *#* Revision 1.2  2004/08/05 18:46:52  bernie
- *#* Documentation improvements.
- *#*
- *#* Revision 1.1  2004/07/29 23:34:32  bernie
- *#* Add template configuration file.
- *#*
- *#*/
-
-#ifndef CONFIG_COMMON_H
-#define CONFIG_COMMON_H
-
-/*! Baud-rate for the kdebug console */
-#define CONFIG_KDEBUG_BAUDRATE  19200
-
-/*!
- * printf()-style formatter configuration.
- *
- * \sa PRINTF_DISABLED
- * \sa PRINTF_NOMODIFIERS
- * \sa PRINTF_REDUCED
- * \sa PRINTF_NOFLOAT
- * \sa PRINTF_FULL
- */
-#define CONFIG_PRINTF PRINTF_FULL
-
-/*!
- * Multithreading kernel
- *
- * /sa config_kernel.h
- */
-#define CONFIG_KERNEL 0
-
-/*!
- * \name Serial driver parameters
- * \{
- */
-       /*! Size of the outbound FIFO buffer for all ports (bytes) */
-       #define CONFIG_SER_TXBUFSIZE  32
-       /*! Size of the inbound FIFO buffer for all ports (bytes) */
-       #define CONFIG_SER_RXBUFSIZE  64
-
-       /*! Default transmit timeout (ms). Set to -1 to disable timeout support */
-       #define CONFIG_SER_TXTIMEOUT    -1
-       /*! Default receive timeout (ms). Set to -1 to disable timeout support */
-       #define CONFIG_SER_RXTIMEOUT    -1
-
-       /*! Use RTS/CTS handshake */
-       #define CONFIG_SER_HWHANDSHAKE   0
-
-       /*! Default baud rate (set to 0 to disable) */
-       #define CONFIG_SER_DEFBAUDRATE   0
-
-       /*! Enable ser_gets() and ser_gets_echo() */
-       #define CONFIG_SER_GETS          0
-
-       /*!
-        * Transmit always something on serial port 0 TX
-        * to avoid interference when sending burst of data,
-        * using AVR multiprocessor serial mode
-        */
-       #define CONFIG_SER_TXFILL        0
-
-       #define CONFIG_SER_STROBE        0
-/*\}*/
-
-/*!
- * \name KBus configuration
- * \{
- */
-       /*! Board address for KBus */
-       #define CONFIG_KBUS_ADDR KBUS_ADDR_FOOBAR
-
-       /*! Disable KBUS escaping support */
-       #define CONFIG_KBUS_ESCAPE  0
-
-       /*! Serial port for internal KBUS communication */
-       #define CONFIG_KBUS_PORT  0
-
-       /*! Serial port speed for KBus communication */
-       #define CONFIG_KBUS_BAUDRATE  19200
-/*\}*/
-
-//! Hardware timer selection for drv/timer.c
-#define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
-
-#define CONFIG_TIMER_STROBE  0
-
-//! EEPROM type for drv/eeprom.c
-#define CONFIG_EEPROM_TYPE EEPROM_24XX256
-
-#endif /* CONFIG_COMMON_H */