Refactor eeprom driver to use kfile interface.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@1795 38d2e660-2303-0410-9eaa-f027e97ec537

diff --git a/bertos/drv/eeprom.h b/bertos/drv/eeprom.h
index 9c58d58c9d9c6fc0491258b4b2ea6fd963365f18..15c565535e343bd77d6d3bc78ef0146fb4e29b94 100644 (file)
--- a/bertos/drv/eeprom.h
+++ b/bertos/drv/eeprom.h
@@ -42,26 +42,52 @@
 #ifndef DRV_EEPROM_H
 #define DRV_EEPROM_H
 
-#include "cfg/cfg_eeprom.h"
 #include <cfg/compiler.h>
+#include <kern/kfile.h>
+
+
+/**
+ * Values for Eeprom types.
+ */
+typedef enum EepromType
+{
+       EEPROM_24XX16,
+       EEPROM_24XX256,
+       EEPROM_24XX512,
+       EEPROM_CNT,
+} EepromType;
+
+/**
+ * On the same I2C bus can live more than one EEPROM
+ * device. Each device can be addressed by one or more
+ * pins.
+ */
+typedef uint8_t e2dev_addr_t;
+
+/**
+ * Describe an EEPROM context, used by the driver to
+ * access the single device.
+ */
+typedef struct Eeprom
+{
+       KFile fd;          ///< File descriptor.
+       EepromType type;   ///< EEPROM type
+       e2dev_addr_t addr; ///< Device address.
+} Eeprom;
 
 /**
- * \name Values for CONFIG_EEPROM_TYPE
- * \{
+ * ID for eeproms.
  */
-#define EEPROM_24XX16 1
-#define EEPROM_24XX256 2
-/*\}*/
+#define KFT_EEPROM MAKE_ID('E', 'E', 'P', 'R')
 
-#if CONFIG_EEPROM_TYPE == EEPROM_24XX16
-       #define EEPROM_BLKSIZE   0x10 ///< Eeprom block size (16byte)
-       #define EEPROM_SIZE     0x800 ///< Eeprom total size (2kB)
-#elif CONFIG_EEPROM_TYPE == EEPROM_24XX256
-       #define EEPROM_BLKSIZE   0x40 ///< Eeprom block size (64byte)
-       #define EEPROM_SIZE    0x8000 ///< Eeprom total size (32kB)
-#else
-       #error Unsupported EEPROM type.
-#endif
+/**
+ * Convert + ASSERT from generic KFile to Eeprom.
+ */
+INLINE Eeprom * EEPROM(KFile *fd)
+{
+       ASSERT(fd->_type == KFT_EEPROM);
+       return (Eeprom *)fd;
+}
 
 /// Type for EEPROM addresses
 typedef uint16_t e2addr_t;
@@ -77,13 +103,29 @@ typedef uint16_t e2addr_t;
  */
 #define e2addr(type, field) ((e2addr_t)&(((type *)0)->field))
 
+/**
+ * Type for EEPROM block size.
+ */
+typedef uint16_t e2blk_size_t;
+
+/**
+ * Type for accessing EEPROM whole size.
+ */
+typedef uint32_t e2_size_t;
+
+/**
+ * Descrive all EEPROM informations
+ * needed by the driver.
+ */
+typedef struct EepromInfo
+{
+       bool has_dev_addr;     ///< true if memory is device addressable (its A0, A1, A2 pin are used by memory).
+       e2blk_size_t blk_size; ///< block size
+       e2_size_t e2_size;     ///< eeprom size
+} EepromInfo;
 
-bool eeprom_write(e2addr_t addr, const void *buf, size_t count);
-bool eeprom_read(e2addr_t addr, void *buf, size_t count);
-bool eeprom_write_char(e2addr_t addr, char c);
-int eeprom_read_char(e2addr_t addr);
-void eeprom_erase(e2addr_t addr, size_t count);
-void eeprom_init(void);
-void eeprom_test(void);
+bool eeprom_erase(Eeprom *fd, e2addr_t addr, e2_size_t count);
+bool eeprom_verify(Eeprom *fd, const void *buf, size_t count);
+void eeprom_init(Eeprom *fd, EepromType, e2dev_addr_t, bool verify);
 
 #endif /* DRV_EEPROM_H */