*/
#define CONFIG_ADC_STROBE 0
+
+/**
+ * Start up timer[s] = startup value / ADCClock [Hz]
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3_adc_sut"
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_SUT ADC_SUT512
+
+/**
+ * Analog Settling Time[s] = settling value / ADCClock[Hz]
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3_adc_stt"
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_STTLING ADC_AST17
+
+/**
+ * Tracking Time[s] = (TRACKTIM + 1) / ADCClock[Hz]
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_TRACKTIM 0
+
+/**
+ * Transfer Period[s] = (TRANSFER * 2 + 3) ADCClock[Hz]
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_TRANSFER 1
+
#endif /* CFG_ADC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for DAC module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_DAC_H
+#define CFG_DAC_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define DAC_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define DAC_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * DAC Refresh Period = 1024*REFRESH/DACC Clock
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "sam3x"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 65536
+ */
+#define CONFIG_DAC_REFRESH 16
+
+/**
+ * DAC Startup Time Selection.
+ * see datasheet table.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "sam3x"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 63
+ */
+#define CONFIG_DAC_STARTUP 0
+
+/**
+ * DAC Trigger Selection.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3x_dac_tc"
+ * $WIZ$ supports = "sam3x"
+ */
+#define CONFIG_DAC_TIMER DACC_TRGSEL_TIO_CH0
+
+#endif /* CFG_DAC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the Eeprom module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_EEPROM_H
+#define CFG_EEPROM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define EEPROM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define EEPROM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Check this to disable Eeprom deprecated API support.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_EEPROM_DISABLE_OLD_API 0
+
+#endif /* CFG_EEPROM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the HTTP module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_HTTP_H
+#define CFG_HTTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define HTTP_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define HTTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+/**
+ * Default start page to load
+ *
+ * $WIZ$ type = "str"
+ */
+#define HTTP_DEFAULT_PAGE "index.htm"
+
+#endif /* CFG_HTTP_H */
*
*
* \author Luca Ottaviano <lottaviano@develer.com>
+ * \author Daniele Basile <asterix@develer.com>
*/
#ifndef CFG_I2S_H
#define CFG_I2S_H
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define I2S_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define I2S_LOG_FORMAT LOG_FMT_TERSE
+
/**
* Length of each play buffer.
*
#define CONFIG_SAMPLE_FREQ 44100UL
/**
- * Module logging level.
+ * Sample bits per channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_level"
+ * $WIZ$ type = "int"
+ * * $WIZ$ min = 8
+ * $WIZ$ max = 32
*/
-#define I2S_LOG_LEVEL LOG_LVL_INFO
+#define CONFIG_WORD_BIT_SIZE 16
/**
- * Module logging format.
+ * Number of channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_format"
+ * $WIZ$ type = "int"
*/
-#define I2S_LOG_FORMAT LOG_FMT_TERSE
+#define CONFIG_CHANNEL_NUM 2
+
+/**
+ * Size of trasmit start delay
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 255
+ */
+#define CONFIG_DELAY 0
+
+/**
+ * Generate frame sync every 2 x CONFIG_PERIOD bits (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 512
+ */
+#define CONFIG_PERIOD 15
+
+/**
+ * Number of words transmitted in frame
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 16
+ */
+#define CONFIG_WORD_PER_FRAME 1
+
+/**
+ * Size of Synchro data register (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_FRAME_SYNC_SIZE 15
+
+
+/**
+ * Extra Size of Synchro data register (CONFIG_FRAME_SYNC_SIZE + CONFIG_EXTRA_FRAME_SYNC_SIZE * 16 + 1) (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_EXTRA_FRAME_SYNC_SIZE 0
#endif /* CFG_I2S_H */
*/
#define CONFIG_INI_MAX_LINE_LEN 64
+/**
+ * Make case insensitive comparisons.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_INI_CASE_INSENSITIVE 0
+
#endif /* CFG_INI_READER_H */
--- /dev/null
+/**
+ * \file cfg_led_7seg.h
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \brief Configuration file for led 7 segment display.
+ *
+ * \author Fabio Bizzi <fbizzi@bizzi.org>
+ *
+ * \addtogroup SevenSegDisplay 7 Segments LED Displays Driver
+ * \{
+ *
+ */
+
+#ifndef CFG_LED_7SEG_H
+#define CFG_LED_7SEG_H
+
+/**
+ * Use a Common Cathode display.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_LED_7SEG_CCAT 0
+
+/**
+ * Number of digit present in the LED display.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ * $WIZ$ max = 8
+ */
+#define CONFIG_LED_7SEG_DIGIT 4
+
+/**
+ * Max lenght of the string to be displayed.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 16
+ * $WIZ$ max = 255
+ */
+#define CONFIG_LED_7SEG_STRLEN 255
+
+/**
+ * Default scrolling speed (ms * CONFIG_LED_7SEG_RTIME).
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_LED_7SEG_SSPEED 10
+
+/**
+ * Default refresh time (ms).
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_LED_7SEG_RTIME 5
+
+#endif /* CFG_LED_7SEG_H */
+ /** \} */ //defgroup drivers
+
/**
* MEM_ALIGNMENT: should be set to the alignment of the CPU
+ * \verbatim
* 4 byte alignment -> #define MEM_ALIGNMENT 4
* 2 byte alignment -> #define MEM_ALIGNMENT 2
+ * \endverbatim
*/
#ifndef MEM_ALIGNMENT
#define MEM_ALIGNMENT 4
/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled,
* you have to define
+ * \code
* #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}}
+ * \endcode
* (an array of structs name/address, where address is an u32_t in network
* byte order).
*
* Instead, you can also use an external function:
+ * \code
* #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name)
+ * \endcode
* that returns the IP address or INADDR_NONE if not found.
*/
#ifndef DNS_LOCAL_HOSTLIST
* $WIZ$ type = "boolean"
*/
#define LWIP_SOCKET 1
+#if LWIP_SOCKET
+ /*
+ * The sockets.c file requires this macro to be defined to really
+ * set errno on errors.
+ */
+ #define ERRNO
+#endif
/**
* Enable BSD-style sockets functions names.
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \author Stefano Fedrigo <aleph@develer.com>
+ *
+ * \brief Configuration file for NAND driver module.
+ */
+
+#ifndef CFG_NAND_H
+#define CFG_NAND_H
+
+/**
+ * Page data size
+ *
+ * Size of the data section of a programmable page in bytes.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_DATA_SIZE 2048
+
+/**
+ * Page spare area size
+ *
+ * Size of the spare section of a programmable page in bytes.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_SPARE_SIZE 64
+
+/**
+ * Pages per block
+ *
+ * Number of pages in a erase block.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_PAGES_PER_BLOCK 64
+
+/**
+ * Number of blocks
+ *
+ * Total number of erase blocks in one NAND chip.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_NUM_BLOCK 2048
+
+/**
+ * Number of reserved blocks
+ *
+ * Blocks reserved for remapping defective NAND blocks.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_NUM_REMAP_BLOCKS 128
+
+/**
+ * NAND operations timeout
+ *
+ * How many milliseconds the cpu waits for
+ * completion of NAND operations.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_TMOUT 100
+
+/**
+ * Module logging level
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define CONFIG_NAND_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define CONFIG_NAND_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_NAND_H */
#ifndef CFG_PARSER_H
#define CFG_PARSER_H
+/**
+ * Max number of arguments and results for each command
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_PARSER_MAX_ARGS 4
+
+/**
+ * Max number of commands
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 8
+ */
+#define CONFIG_MAX_COMMANDS_NUMBER 16
+/**
+ * Enable compatibility behaviour.
+ *
+ * Skip the first word from incoming commands. Don't enable in new projects.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_ENABLE_COMPAT_BEHAVIOUR 1
#endif /* CFG_PARSER_H */
*/
#define CONFIG_KERN_PRI 0
+/**
+ * Priority-inheritance protocol.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_KERN_PRI_INHERIT 0
+
/**
* Dynamic memory allocation for processes.
* $WIZ$ type = "boolean"
*/
#define PWM_LOG_FORMAT LOG_FMT_VERBOSE
+/**
+ * Enable the OLD pwm API.
+ * Not recommended for new projects.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CFG_PWM_ENABLE_OLD_API 1
+
#endif /* CFG_PWM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the "random" module
+ */
+
+#ifndef CFG_RANDOM_H
+#define CFG_RANDOM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define RANDOM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define RANDOM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Random security level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "random_level"
+ */
+#define RANDOM_SECURITY_LEVEL RANDOM_SECURITY_MINIMUM
+
+#endif /* CFG_RANDOM_H */
*/
#define CONFIG_SD_AUTOASSIGN_FAT 1
+/**
+ * SD bus mode.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sd_mode"
+ */
+#define CONFIG_SD_MODE SD_SPI_MODE
+
/**
* Enable backward compatibility for sd_init().
* If enabled, sd_init() will allocate internally an Sd context,
*
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_order_bit"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
/**
* SPI clock division factor.
* $WIZ$ type = "int"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_CLOCK_DIV 16
* SPI clock polarity: normal low or normal high.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_pol"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
* sample on second clock edge.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_phase"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega32d"
*/
#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
--- /dev/null
+#ifndef CFG_TFTP_H
+#define CFG_TFTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define TFTP_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define TFTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+#endif /* CFG_TFTP_H */
*/
#define CONFIG_USB_BUFSIZE 64
+/**
+ * Maximum number of USB device interfaces (default = 1).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_USB_INTERFACE_MAX 1
+
+/**
+ * Maximum number of allocated endpoints (0 = auto).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_USB_EP_MAX 0
+
+/**
+ * Maximum packet size of the control endpoint 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 8
+ */
+#define CONFIG_EP0_MAX_SIZE 8
+
#endif /* CFG_USB_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the WM8731 module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_WM8731_H
+#define CFG_WM8731_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define WM8731_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define WM8731_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * Digital control: ADC High pass filter
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DAPC 0
+
+
+/**
+ * Digital control: De-emphasis control
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_deemp"
+ */
+#define CONFIG_WM8731_DEEMP WM8731_DEEMP_DISABLE
+
+/**
+ * Digital control: DAC soft mute control
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DACMU 0
+
+
+/**
+ * Analog control: Microphone boost
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MICBOOST 0
+
+/**
+ * Analog control: Microphone/Line Input select to ADC
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_insel"
+ */
+#define CONFIG_WM8731_INSEL WM8731_INSEL_MIC
+
+
+/**
+ * Analog control: out selector
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_bypass"
+ */
+#define CONFIG_WM8731_BYPASS WM8731_DACSEL
+
+/**
+ * Analog control: Side tone attenuation
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_sideatt"
+ */
+#define CONFIG_WM8731_SIDEATT WM8731_SIDEATT_6dB
+
+
+/**
+ * Digital Audio interface format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_fmt"
+ */
+#define CONFIG_WM8731_INTERFACE_FORMAT WM8731_FORMAT_I2S
+
+/**
+ * Digital Audio data bit length.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_databit"
+ */
+#define CONFIG_WM8731_IWL_BITS WM8731_IWL_16_BIT
+
+/**
+ * Enable Master mode.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MS 0
+
+
+/**
+ * Data sampling rate, refer to datasheet for this value.
+ * $WIZ$ type = "hex"
+ */
+#define CONFIG_WM8731_SAMPLING_RATES 0x6
+
+#endif /* CFG_WM8731_H */
#include <cfg/debug.h>
#include <cpu/irq.h>
-#include <drv/spi_dma.h>
+#include <drv/spi_dma.h>
#include <drv/timer.h>
#include <drv/kbd.h>
#include <drv/lcd_ili9225.h>
p4
sS'WIZARD_VERSION'
p5
-I3
+I4
sS'PROJECT_NAME'
p6
-Vempty
+Vsam3n-ek_empty
p7
sS'TOOLCHAIN'
p8
(dp9
-Vtarget
+S'path'
p10
-Varm-none-eabi
+Varm-none-eabi-gcc
p11
-sVthread
+ssS'PROJECT_SRC_PATH_FROM_MAKEFILE'
p12
-Vsingle
+Vboards/sam3n-ek/templates/sam3n-ek_empty
p13
-sVconfigured
+sS'ENABLED_MODULES'
p14
-V/scratch/julian/2010q1-release-eabi-lite/src/gcc-4.4-2010q1/configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=arm-none-eabi --enable-threads --disable-libmudflap --disable-libssp --disable-libstdcxx-pch --enable-extra-sgxxlite-multilibs --with-gnu-as --with-gnu-ld --with-specs='%{O2:%{!fno-remove-local-statics: -fremove-local-statics}} %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: -fremove-local-statics}}}' --enable-languages=c,c++ --disable-shared --disable-lto --with-newlib --with-pkgversion='Sourcery G++ Lite 2010q1-188' --with-bugurl=https://support.codesourcery.com/GNUToolchain/ --disable-nls --prefix=/opt/codesourcery --with-headers=yes --with-sysroot=/opt/codesourcery/arm-none-eabi --with-build-sysroot=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi --with-gmp=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-mpfr=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-ppl=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-cloog=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --disable-libgomp --enable-poison-system-directories --with-build-time-tools=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi/bin --with-build-time-tools=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi/bin
-p15
-sVversion
+(lp15
+S'debug'
p16
-V4.4.1
+aS'formatwr'
p17
-sVbuild
+aS'gfx'
p18
-VSourcery G++ Lite 2010q1-188
+aS'kbd'
p19
-sVpath
+aS'lcd_ili9225'
p20
-V/localhome/toolchain/arm/bin/arm-none-eabi-gcc
+aS'sprintf'
p21
-ssS'ENABLED_MODULES'
+aS'text'
p22
-(lp23
-S'text'
-p24
-aS'kbd'
-p25
-aS'lcd_ili9225'
-p26
aS'text_format'
-p27
-aS'sprintf'
-p28
-aS'debug'
-p29
+p23
aS'timer'
-p30
-aS'gfx'
-p31
-aS'formatwr'
-p32
+p24
asS'CPU_NAME'
-p33
+p25
VSAM3N4
-p34
+p26
sS'PROJECT_HW_PATH'
-p35
+p27
S'../..'
-p36
+p28
sS'PROJECT_SRC_PATH'
-p37
+p29
S'.'
-p38
+p30
sS'PRESET'
-p39
+p31
I01
+sS'PROJECT_HW_PATH_FROM_MAKEFILE'
+p32
+Vboards/sam3n-ek
+p33
sS'OUTPUT'
-p40
-(lp41
+p34
+(lp35
S'codelite'
-p42
+p36
as.
\ No newline at end of file
#
# Wizard autogenerated makefile.
-# DO NOT EDIT, use the empty_user.mk file instead.
+# DO NOT EDIT, use the sam3n-ek_empty_user.mk file instead.
#
# Constants automatically defined by the selected modules
-empty_DEBUG = 1
+sam3n-ek_empty_DEBUG = 1
# Our target application
-TRG += empty
+TRG += sam3n-ek_empty
-empty_PREFIX = "arm-none-eabi-"
+sam3n-ek_empty_PREFIX = "/localhome/toolchain/arm/bin/arm-none-eabi-"
-empty_SUFFIX = ""
+sam3n-ek_empty_SUFFIX = ""
-empty_SRC_PATH = boards/sam3n-ek/templates/empty
+sam3n-ek_empty_SRC_PATH = boards/sam3n-ek/templates/sam3n-ek_empty
-empty_HW_PATH = boards/sam3n-ek
+sam3n-ek_empty_HW_PATH = boards/sam3n-ek
-# Files automatically generated by the wizard. DO NOT EDIT, USE empty_USER_CSRC INSTEAD!
-empty_WIZARD_CSRC = \
- bertos/mware/event.c \
- bertos/gfx/bitmap.c \
- bertos/gfx/text.c \
- bertos/drv/lcd_ili9225.c \
+# Files automatically generated by the wizard. DO NOT EDIT, USE sam3n-ek_empty_USER_CSRC INSTEAD!
+sam3n-ek_empty_WIZARD_CSRC = \
bertos/cpu/cortex-m3/drv/timer_cm3.c \
+ bertos/drv/kbd.c \
+ bertos/drv/lcd_ili9225.c \
bertos/drv/timer.c \
- bertos/mware/formatwr.c \
- bertos/mware/sprintf.c \
+ bertos/fonts/luBS14.c \
+ bertos/gfx/bitmap.c \
bertos/gfx/line.c \
+ bertos/gfx/text.c \
bertos/gfx/text_format.c \
- bertos/drv/kbd.c \
- bertos/fonts/luBS14.c \
+ bertos/io/kfile.c \
+ bertos/mware/event.c \
+ bertos/mware/formatwr.c \
bertos/mware/hex.c \
+ bertos/mware/sprintf.c \
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE empty_USER_PCSRC INSTEAD!
-empty_WIZARD_PCSRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE sam3n-ek_empty_USER_PCSRC INSTEAD!
+sam3n-ek_empty_WIZARD_PCSRC = \
\
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE empty_USER_CPPASRC INSTEAD!
-empty_WIZARD_CPPASRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE sam3n-ek_empty_USER_CPPASRC INSTEAD!
+sam3n-ek_empty_WIZARD_CPPASRC = \
\
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE empty_USER_CXXSRC INSTEAD!
-empty_WIZARD_CXXSRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE sam3n-ek_empty_USER_CXXSRC INSTEAD!
+sam3n-ek_empty_WIZARD_CXXSRC = \
\
#
-# Files automatically generated by the wizard. DO NOT EDIT, USE empty_USER_ASRC INSTEAD!
-empty_WIZARD_ASRC = \
+# Files automatically generated by the wizard. DO NOT EDIT, USE sam3n-ek_empty_USER_ASRC INSTEAD!
+sam3n-ek_empty_WIZARD_ASRC = \
\
#
-empty_CPPFLAGS = -D'CPU_FREQ=(48000000UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -I$(empty_HW_PATH) -I$(empty_SRC_PATH) $(empty_CPU_CPPFLAGS) $(empty_USER_CPPFLAGS)
+sam3n-ek_empty_CPPFLAGS = -D'CPU_FREQ=(48000000UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -I$(sam3n-ek_empty_HW_PATH) -I$(sam3n-ek_empty_SRC_PATH) $(sam3n-ek_empty_CPU_CPPFLAGS) $(sam3n-ek_empty_USER_CPPFLAGS)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-empty_LDFLAGS = $(empty_CPU_LDFLAGS) $(empty_WIZARD_LDFLAGS) $(empty_USER_LDFLAGS)
+sam3n-ek_empty_LDFLAGS = $(sam3n-ek_empty_CPU_LDFLAGS) $(sam3n-ek_empty_WIZARD_LDFLAGS) $(sam3n-ek_empty_USER_LDFLAGS)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-empty_CPPAFLAGS = $(empty_CPU_CPPAFLAGS) $(empty_WIZARD_CPPAFLAGS) $(empty_USER_CPPAFLAGS)
+sam3n-ek_empty_CPPAFLAGS = $(sam3n-ek_empty_CPU_CPPAFLAGS) $(sam3n-ek_empty_WIZARD_CPPAFLAGS) $(sam3n-ek_empty_USER_CPPAFLAGS)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-empty_CSRC = $(empty_CPU_CSRC) $(empty_WIZARD_CSRC) $(empty_USER_CSRC)
+sam3n-ek_empty_CSRC = $(sam3n-ek_empty_CPU_CSRC) $(sam3n-ek_empty_WIZARD_CSRC) $(sam3n-ek_empty_USER_CSRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-empty_PCSRC = $(empty_CPU_PCSRC) $(empty_WIZARD_PCSRC) $(empty_USER_PCSRC)
+sam3n-ek_empty_PCSRC = $(sam3n-ek_empty_CPU_PCSRC) $(sam3n-ek_empty_WIZARD_PCSRC) $(sam3n-ek_empty_USER_PCSRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-empty_CPPASRC = $(empty_CPU_CPPASRC) $(empty_WIZARD_CPPASRC) $(empty_USER_CPPASRC)
+sam3n-ek_empty_CPPASRC = $(sam3n-ek_empty_CPU_CPPASRC) $(sam3n-ek_empty_WIZARD_CPPASRC) $(sam3n-ek_empty_USER_CPPASRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-empty_CXXSRC = $(empty_CPU_CXXSRC) $(empty_WIZARD_CXXSRC) $(empty_USER_CXXSRC)
+sam3n-ek_empty_CXXSRC = $(sam3n-ek_empty_CPU_CXXSRC) $(sam3n-ek_empty_WIZARD_CXXSRC) $(sam3n-ek_empty_USER_CXXSRC)
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-empty_ASRC = $(empty_CPU_ASRC) $(empty_WIZARD_ASRC) $(empty_USER_ASRC)
+sam3n-ek_empty_ASRC = $(sam3n-ek_empty_CPU_ASRC) $(sam3n-ek_empty_WIZARD_ASRC) $(sam3n-ek_empty_USER_ASRC)
# CPU specific flags and options, defined in the CPU definition files.
# Automatically generated by the wizard. PLEASE DO NOT EDIT!
-empty_CPU_CPPASRC = bertos/cpu/cortex-m3/hw/crt_cm3.S bertos/cpu/cortex-m3/hw/vectors_cm3.S
-empty_CPU_CPPAFLAGS = -g -gdwarf-2 -mthumb -mno-thumb-interwork
-empty_CPU_CPPFLAGS = -O0 -g3 -gdwarf-2 -mthumb -mno-thumb-interwork -fno-strict-aliasing -fwrapv -fverbose-asm -Ibertos/cpu/cortex-m3/ -D__ARM_SAM3N4__
-empty_CPU_CSRC = bertos/cpu/cortex-m3/hw/init_cm3.c bertos/cpu/cortex-m3/drv/irq_cm3.c bertos/cpu/cortex-m3/drv/clock_sam3.c
-empty_PROGRAMMER_CPU = sam3
-empty_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
-empty_CPU = cortex-m3
-empty_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
-empty_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh
-empty_CPU_LDFLAGS = -mthumb -mno-thumb-interwork -nostartfiles -Wl,--no-warn-mismatch -T bertos/cpu/cortex-m3/scripts/sam3n4_rom.ld
-empty_FLASH_SCRIPT = bertos/prg_scripts/arm/flash-sam3.sh
-
-include $(empty_SRC_PATH)/empty_user.mk
+sam3n-ek_empty_CPU_CPPASRC = bertos/cpu/cortex-m3/hw/crt_cm3.S bertos/cpu/cortex-m3/hw/vectors_cm3.S
+sam3n-ek_empty_CPU_CPPAFLAGS = -g -gdwarf-2 -mthumb -mno-thumb-interwork
+sam3n-ek_empty_CPU_CPPFLAGS = -O0 -g3 -gdwarf-2 -mthumb -mno-thumb-interwork -fno-strict-aliasing -fwrapv -fverbose-asm -Ibertos/cpu/cortex-m3/ -D__ARM_SAM3N4__
+sam3n-ek_empty_CPU_CSRC = bertos/cpu/cortex-m3/hw/init_cm3.c bertos/cpu/cortex-m3/drv/irq_cm3.c bertos/cpu/cortex-m3/drv/clock_sam3.c
+sam3n-ek_empty_PROGRAMMER_CPU = sam3
+sam3n-ek_empty_CPU_LDFLAGS = -mthumb -mno-thumb-interwork -nostartfiles -Wl,--no-warn-mismatch -Wl,-dT bertos/cpu/cortex-m3/scripts/sam3n4_rom.ld
+sam3n-ek_empty_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
+sam3n-ek_empty_CPU = cortex-m3
+sam3n-ek_empty_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
+sam3n-ek_empty_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh
+sam3n-ek_empty_FLASH_SCRIPT = bertos/prg_scripts/arm/flash-sam3.sh
+
+include $(sam3n-ek_empty_SRC_PATH)/sam3n-ek_empty_user.mk
#
# Programmer interface configuration, see http://dev.bertos.org/wiki/ProgrammerInterface for help
-empty_PROGRAMMER_TYPE = none
-empty_PROGRAMMER_PORT = none
+sam3n-ek_empty_PROGRAMMER_TYPE = none
+sam3n-ek_empty_PROGRAMMER_PORT = none
# Files included by the user.
-empty_USER_CSRC = \
- $(empty_SRC_PATH)/main.c \
- bertos/cpu/arm/drv/spi_dma_at91.c \
+sam3n-ek_empty_USER_CSRC = \
+ $(sam3n-ek_empty_SRC_PATH)/main.c \
+ bertos/cpu/cortex-m3/drv/spi_dma_sam3.c \
#
# Files included by the user.
-empty_USER_PCSRC = \
+sam3n-ek_empty_USER_PCSRC = \
#
# Files included by the user.
-empty_USER_CPPASRC = \
+sam3n-ek_empty_USER_CPPASRC = \
#
# Files included by the user.
-empty_USER_CXXSRC = \
+sam3n-ek_empty_USER_CXXSRC = \
#
# Files included by the user.
-empty_USER_ASRC = \
+sam3n-ek_empty_USER_ASRC = \
#
# Flags included by the user.
-empty_USER_LDFLAGS = \
+sam3n-ek_empty_USER_LDFLAGS = \
#
# Flags included by the user.
-empty_USER_CPPAFLAGS = \
+sam3n-ek_empty_USER_CPPAFLAGS = \
#
# Flags included by the user.
-empty_USER_CPPFLAGS = \
+sam3n-ek_empty_USER_CPPFLAGS = \
-fno-strict-aliasing \
-fwrapv \
#
projects / bertos.git / commitdiff