/**
- * @file
- * Ethernet Interface Skeleton
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
*
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Ethernet driver glue for lwIP
+ *
+ * \author Andrea Righi <arighi@develer.com>
*/
/*
* Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
+ * derived from this software without specific prior written permission.
*
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
- *
+ *
* Author: Adam Dunkels <adam@sics.se>
*
*/
* something that better describes your network interface.
*/
-#include "lwip/opt.h"
+#include "cfg/cfg_lwip.h"
+
+#include <drv/eth.h>
+
+#include <cpu/irq.h>
-#if 0 /* don't build, this is only a skeleton, see previous comment */
+#include <kern/proc.h>
-#include "lwip/def.h"
-#include "lwip/mem.h"
-#include "lwip/pbuf.h"
-#include "lwip/sys.h"
+#include <lwip/def.h>
+#include <lwip/mem.h>
+#include <lwip/pbuf.h>
+#include <lwip/sys.h>
#include <lwip/stats.h>
#include <lwip/snmp.h>
-#include "netif/etharp.h"
-#include "netif/ppp_oe.h"
+
+#include <netif/etharp.h>
+#include <netif/ppp_oe.h>
+
+#include <netif/ethernetif.h>
/* Define those to better describe your network interface. */
#define IFNAME0 'e'
-#define IFNAME1 'n'
+#define IFNAME1 '0'
/**
* Helper struct to hold private data used to operate your ethernet interface.
* as it is already kept in the struct netif.
* But this is only an example, anyway...
*/
-struct ethernetif {
- struct eth_addr *ethaddr;
- /* Add whatever per-interface state that is needed here. */
+struct ethernetif
+{
+ struct eth_addr *ethaddr;
+ /* Add whatever per-interface state that is needed here. */
};
-/* Forward declarations. */
-static void ethernetif_input(struct netif *netif);
-
/**
* In this function, the hardware should be initialized.
* Called from ethernetif_init().
* @param netif the already initialized lwip network interface structure
* for this ethernetif
*/
-static void
-low_level_init(struct netif *netif)
+static void low_level_init(struct netif *netif)
{
- struct ethernetif *ethernetif = netif->state;
-
- /* set MAC hardware address length */
- netif->hwaddr_len = ETHARP_HWADDR_LEN;
-
- /* set MAC hardware address */
- netif->hwaddr[0] = ;
- ...
- netif->hwaddr[5] = ;
-
- /* maximum transfer unit */
- netif->mtu = 1500;
-
- /* device capabilities */
- /* don't set NETIF_FLAG_ETHARP if this device is not an ethernet one */
- netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP;
-
- /* Do whatever else is needed to initialize interface. */
+ /* set MAC hardware address length */
+ netif->hwaddr_len = ETHARP_HWADDR_LEN;
+
+ /* set MAC hardware address */
+ netif->hwaddr[0] = mac_addr[0];
+ netif->hwaddr[1] = mac_addr[1];
+ netif->hwaddr[2] = mac_addr[2];
+ netif->hwaddr[3] = mac_addr[3];
+ netif->hwaddr[4] = mac_addr[4];
+ netif->hwaddr[5] = mac_addr[5];
+
+ /* maximum transfer unit */
+ netif->mtu = 1500;
+
+ /* device capabilities */
+ /* don't set NETIF_FLAG_ETHARP if this device is not an ethernet one */
+ netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP;
+
+ eth_init();
}
/**
* dropped because of memory failure (except for the TCP timers).
*/
-static err_t
-low_level_output(struct netif *netif, struct pbuf *p)
+static err_t low_level_output(UNUSED_ARG(struct netif *, netif), struct pbuf *p)
{
- struct ethernetif *ethernetif = netif->state;
- struct pbuf *q;
+ struct pbuf *q;
- initiate transfer();
-
-#if ETH_PAD_SIZE
- pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */
-#endif
+ #if ETH_PAD_SIZE
+ pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */
+ #endif
- for(q = p; q != NULL; q = q->next) {
- /* Send the data from the pbuf to the interface, one pbuf at a
- time. The size of the data in each pbuf is kept in the ->len
- variable. */
- send data from(q->payload, q->len);
- }
+ proc_forbid();
+ for (q = p; q != NULL; q = q->next)
+ eth_putFrame(q->payload, q->len);
+ eth_sendFrame();
- signal that packet should be sent();
+ #if ETH_PAD_SIZE
+ pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */
+ #endif
-#if ETH_PAD_SIZE
- pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */
-#endif
-
- LINK_STATS_INC(link.xmit);
+ LINK_STATS_INC(link.xmit);
+ proc_permit();
- return ERR_OK;
+ return ERR_OK;
}
/**
* @return a pbuf filled with the received packet (including MAC header)
* NULL on memory error
*/
-static struct pbuf *
-low_level_input(struct netif *netif)
+static struct pbuf *low_level_input(UNUSED_ARG(struct netif *, netif))
{
- struct ethernetif *ethernetif = netif->state;
- struct pbuf *p, *q;
- u16_t len;
-
- /* Obtain the size of the packet and put it into the "len"
- variable. */
- len = ;
-
-#if ETH_PAD_SIZE
- len += ETH_PAD_SIZE; /* allow room for Ethernet padding */
-#endif
-
- /* We allocate a pbuf chain of pbufs from the pool. */
- p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL);
-
- if (p != NULL) {
-
-#if ETH_PAD_SIZE
- pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */
-#endif
-
- /* We iterate over the pbuf chain until we have read the entire
- * packet into the pbuf. */
- for(q = p; q != NULL; q = q->next) {
- /* Read enough bytes to fill this pbuf in the chain. The
- * available data in the pbuf is given by the q->len
- * variable.
- * This does not necessarily have to be a memcpy, you can also preallocate
- * pbufs for a DMA-enabled MAC and after receiving truncate it to the
- * actually received size. In this case, ensure the tot_len member of the
- * pbuf is the sum of the chained pbuf len members.
- */
- read data into(q->payload, q->len);
- }
- acknowledge that packet has been read();
-
-#if ETH_PAD_SIZE
- pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */
-#endif
-
- LINK_STATS_INC(link.recv);
- } else {
- drop packet();
- LINK_STATS_INC(link.memerr);
- LINK_STATS_INC(link.drop);
- }
-
- return p;
+ struct pbuf *p, *q;
+ size_t len;
+
+ len = eth_getFrameLen();
+ if (UNLIKELY(len <= 0))
+ return NULL;
+
+ #if ETH_PAD_SIZE
+ len += ETH_PAD_SIZE; /* allow room for Ethernet padding */
+ #endif
+
+ proc_forbid();
+ /* We allocate a pbuf chain of pbufs from the pool. */
+ p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL);
+ if (p != NULL)
+ {
+ #if ETH_PAD_SIZE
+ pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */
+ #endif
+
+ for (q = p; q != NULL; q = q->next)
+ eth_getFrame(q->payload, q->len);
+
+ #if ETH_PAD_SIZE
+ pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */
+ #endif
+
+ LINK_STATS_INC(link.recv);
+ }
+ else
+ {
+ LINK_STATS_INC(link.memerr);
+ LINK_STATS_INC(link.drop);
+ }
+ proc_permit();
+
+ return p;
}
/**
*
* @param netif the lwip network interface structure for this ethernetif
*/
-static void
-ethernetif_input(struct netif *netif)
+static void ethernetif_input(struct netif *netif)
{
- struct ethernetif *ethernetif;
- struct eth_hdr *ethhdr;
- struct pbuf *p;
-
- ethernetif = netif->state;
-
- /* move received packet into a new pbuf */
- p = low_level_input(netif);
- /* no packet could be read, silently ignore this */
- if (p == NULL) return;
- /* points to packet payload, which starts with an Ethernet header */
- ethhdr = p->payload;
-
- switch (htons(ethhdr->type)) {
- /* IP or ARP packet? */
- case ETHTYPE_IP:
- case ETHTYPE_ARP:
-#if PPPOE_SUPPORT
- /* PPPoE packet? */
- case ETHTYPE_PPPOEDISC:
- case ETHTYPE_PPPOE:
-#endif /* PPPOE_SUPPORT */
- /* full packet send to tcpip_thread to process */
- if (netif->input(p, netif)!=ERR_OK)
- { LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_input: IP input error\n"));
- pbuf_free(p);
- p = NULL;
- }
- break;
-
- default:
- pbuf_free(p);
- p = NULL;
- break;
- }
+ struct ethernetif *ethernetif;
+ struct eth_hdr *ethhdr;
+ struct pbuf *p;
+
+ ethernetif = netif->state;
+
+ /* move received packet into a new pbuf */
+ p = low_level_input(netif);
+ /* no packet could be read, silently ignore this */
+ if (p == NULL) return;
+
+ ethhdr = p->payload;
+
+ switch (htons(ethhdr->type))
+ {
+ case ETHTYPE_ARP:
+ etharp_arp_input(netif, ethernetif->ethaddr, p);
+ break;
+
+ case ETHTYPE_IP:
+#if DHCP_DOES_ARP_CHECK
+ etharp_ip_input(netif, p);
+#endif
+ pbuf_header(p, (int16_t) - sizeof(struct eth_hdr));
+
+ if (netif->input(p, netif) != ERR_OK)
+ {
+ LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_input: IP input error\n"));
+ pbuf_free(p);
+ p = NULL;
+ }
+ break;
+ default:
+ pbuf_free(p);
+ p = NULL;
+ break;
+ }
+}
+
+static NORETURN void ethernetif_loop(void *arg)
+{
+ struct netif *netif = (struct netif *)arg;
+ while (1)
+ ethernetif_input(netif);
}
/**
* ERR_MEM if private data couldn't be allocated
* any other err_t on error
*/
-err_t
-ethernetif_init(struct netif *netif)
+err_t ethernetif_init(struct netif *netif)
{
- struct ethernetif *ethernetif;
-
- LWIP_ASSERT("netif != NULL", (netif != NULL));
-
- ethernetif = mem_malloc(sizeof(struct ethernetif));
- if (ethernetif == NULL) {
- LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_init: out of memory\n"));
- return ERR_MEM;
- }
-
-#if LWIP_NETIF_HOSTNAME
- /* Initialize interface hostname */
- netif->hostname = "lwip";
-#endif /* LWIP_NETIF_HOSTNAME */
-
- /*
- * Initialize the snmp variables and counters inside the struct netif.
- * The last argument should be replaced with your link speed, in units
- * of bits per second.
- */
- NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, LINK_SPEED_OF_YOUR_NETIF_IN_BPS);
-
- netif->state = ethernetif;
- netif->name[0] = IFNAME0;
- netif->name[1] = IFNAME1;
- /* We directly use etharp_output() here to save a function call.
- * You can instead declare your own function an call etharp_output()
- * from it if you have to do some checks before sending (e.g. if link
- * is available...) */
- netif->output = etharp_output;
- netif->linkoutput = low_level_output;
-
- ethernetif->ethaddr = (struct eth_addr *)&(netif->hwaddr[0]);
-
- /* initialize the hardware */
- low_level_init(netif);
-
- return ERR_OK;
+ struct ethernetif *ethernetif;
+
+ LWIP_ASSERT("netif != NULL", (netif != NULL));
+
+ ethernetif = mem_malloc(sizeof(struct ethernetif));
+ if (ethernetif == NULL)
+ {
+ LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_init: out of memory\n"));
+ return ERR_MEM;
+ }
+
+ /*
+ * Initialize the snmp variables and counters inside the struct netif.
+ * The last argument should be replaced with your link speed, in units
+ * of bits per second.
+ */
+ NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, LINK_SPEED_OF_YOUR_NETIF_IN_BPS);
+
+ netif->state = ethernetif;
+
+ netif->hwaddr_len = 6;
+ netif->name[0] = IFNAME0;
+ netif->name[1] = IFNAME1;
+ netif->mtu = 1500;
+
+
+ /* We directly use etharp_output() here to save a function call.
+ * You can instead declare your own function an call etharp_output()
+ * from it if you have to do some checks before sending (e.g. if link
+ * is available...)
+ */
+ netif->output = etharp_output;
+ netif->linkoutput = low_level_output;
+
+ ethernetif->ethaddr = (struct eth_addr *)&(netif->hwaddr[0]);
+
+ /* initialize the hardware */
+ low_level_init(netif);
+ etharp_init();
+
+ if (!sys_thread_new((char *)"eth_thread", ethernetif_loop, netif,
+ DEFAULT_THREAD_STACKSIZE, DEFAULT_THREAD_PRIO))
+ {
+ LWIP_DEBUGF(NETIF_DEBUG,
+ ("ethernetif_init: max number of threads exceeded\n"));
+ mem_free(ethernetif);
+ return ERR_MEM;
+ }
+ return ERR_OK;
}
-
-#endif /* 0 */
projects / bertos.git / commitdiff