#define TRACEMSG(...) do {} while(0)
#endif
- /**
- * Multi level logging system.
- *
- * You can use these macro directy or using the cfg/log.h module
- * that provide a simple interface for using the logging multilevel system.
- * The priority level is order form error messages (hight priority) to info messages
- * (low priority), so if you choose a low level log message you can see also all message
- * that have a hight priority.
- *
- * \{
- */
- /// Logging level definition
- #define DBG_LOG_ERROR 0
- #define DBG_LOG_WARNING 1
- #define DBG_LOG_INFO 2
-
- /// Logging verbose mode
- #define DBG_LOG_VERBOSE 1
- #define DBG_LOG_SILENT 0
-
- #define DBG_ERROR(debug_level, mode, str,...) \
- do { \
- if(debug_level >= DBG_LOG_ERROR) \
- { \
- if (mode == DBG_LOG_VERBOSE)\
- kprintf("Error(%s():%d): "str, __func__, __LINE__, ## __VA_ARGS__); \
- else \
- kprintf("Error: "str, ## __VA_ARGS__); \
- } \
- else \
- { \
- /* NONE */ \
- } \
- } while (0)
-
- #define DBG_WARNING(debug_level, mode, str,...) \
- do { \
- if(debug_level >= DBG_LOG_WARNING) \
- { \
- if (mode == DBG_LOG_VERBOSE) \
- kprintf("Warning(%s():%d): "str, __func__, __LINE__, ## __VA_ARGS__); \
- else \
- kprintf("Warning: "str, ## __VA_ARGS__); \
- } \
- else \
- { \
- /* NONE */ \
- } \
- } while (0)
-
- #define DBG_INFO(debug_level, mode, str,...) \
- do { \
- if(debug_level >= DBG_LOG_INFO) \
- { \
- if (mode == DBG_LOG_VERBOSE) \
- kprintf("Info(%s():%d): "str, __func__, __LINE__, ## __VA_ARGS__); \
- else \
- kprintf("Info: "str, ## __VA_ARGS__); \
- } \
- else \
- { \
- /* NONE */ \
- } \
- } while (0)
- /* \} */
/**
* \name Walls to detect data corruption
*
* \brief Logging system module.
*
- * This module implement a simple interface to use the multi level
- * logging system.
+ * This module implement a simple interface to use the multi level logging system.
* The log message have the priority order, like this:
*
* - error message (most hight)
- * - warning message
+ * - warning message
* - info message (most low)
*
* With this priority system we can log only the message that have egual or major
- * priority than log level that you has been configurate. Further you can have a
- * differ log level for each module that you want. To do this you just need to
+ * priority than log level that you has been configurate. Further you can have a
+ * differ log level for each module that you want. To do this you just need to
* define LOG_LEVEL in cfg of select module.
* When you set a log level, the system logs only the message that have priority
* egual or major that you have define, but the other logs function are not include
* at compile time, so all used logs function are linked, but the other no.
*
- * To use logging system you should include this module in your drive and use
+ * To use logging system you should include this module in your drive and use
* a LOG_ERROR, LOG_WARNING and LOG_INFO macros to set the level log of the message.
* Then you should define a LOG_LEVEL and LOG_VERBOSE costant in your
* cfg/cfg_<your_module_name>.h using the follow police:
- *
+ *
+ * - in your file cfg/cfg_<module_name>.h, you define the logging
+ * level and verbosity mode for your specific module:
+ *
* \code
*
- * /**
+ * **
* * Logging level definition.
* *
* * Use 0 to log only the error messages
* *
* #define <module_name>_LOG_LEVEL 2
*
- * /**
+ * **
* * Set logging verbosity.
* *
* * If verbose is zero print short log messages.
* *
* #define <module_name>_LOG_VERBOSE 1
*
+ * \endcode
+ *
+ * - then, in the module that you use a logging macros you should define
+ * a LOG_LEVEL and LOG_VERBOSE using the previous value that you have define
+ * in cfg_<module_name>.h header. After this you should include the cfg/log.h
+ * module:
+ *
+ * \code
+ *
* // Define logging setting (for cfg/log.h module).
* #define LOG_LEVEL <module_name>_LOG_LEVEL
* #define LOG_VERBOSE <module_name>_LOG_VERBOSE
+ * #include <cfg/log.h>
*
* \endcode
*
#include <cfg/debug.h>
+
// Use a default setting if nobody have define a log level
#ifndef LOG_LEVEL
-#define LOG_LEVEL DBG_LOG_ERROR
+#define LOG_LEVEL LOG_LVL_ERR
#endif
// Use a default setting if nobody have define a log verbosity
-#ifndef LOG_VERBOSE
-#define LOG_VERBOSE DBG_LOG_SILENT
+#ifndef LOG_VERBOSITY
+#define LOG_VERBOSITY LOG_SILENT
#endif
/**
- * Error log message.
- * Use this macro to print error messages. This log level have hight priority,
- * that means the error messages are always printed, if debug is enable.
- */
-#define LOG_ERROR(str,...) DBG_ERROR(LOG_LEVEL, LOG_VERBOSE, str, ## __VA_ARGS__)
+* Multi level logging system.
+*
+* You can use these macro directy or using the cfg/log.h module
+* that provide a simple interface for using the logging multilevel system.
+* The priority level is order form error messages (hight priority) to info messages
+* (low priority), so if you choose a low level log message you can see also all message
+* that have a hight priority.
+*
+* \{
+*/
+/// Logging level definition
+#define LOG_LVL_ERR 0
+#define LOG_LVL_WARN 1
+#define LOG_LVL_INFO 2
+
+/// Logging verbose mode
+#define LOG_VERBOSE 1
+#define LOG_SILENT 0
+
+
+#if LOG_VERBOSITY == LOG_VERBOSE
+ #define LOG_PRINT(str_level, str,...) kprintf("%s(%s():%d): "str, str_level, __func__, __LINE__, ## __VA_ARGS__)
+
+#elif LOG_VERBOSITY == LOG_SILENT
+ #define LOG_PRINT(str_level, str,...) kprintf("%s: "str, str_level, ## __VA_ARGS__)
+
+#else
+ #error No log verbosity defined
+
+#endif
/**
* Log message level select.
* also which print function are linked.
* If you choose a low level of log you link all log function (error, warning and info),
* but if choose a hight level you link only that have the priority egual or hight.
- * The priority level go from error (most hight) to info (most low) (see cfg/debug.h
+ * The priority level go from error (most hight) to info (most low) (see cfg/debug.h
* for more detail).
*
*/
-#if (LOG_LEVEL <= DBG_LOG_INFO)
- #define LOG_WARNING(str,...) DBG_WARNING(LOG_LEVEL, LOG_VERBOSE, str, ## __VA_ARGS__)
- #define LOG_INFO(str,...) DBG_INFO(LOG_LEVEL, LOG_VERBOSE, str, ## __VA_ARGS__)
+#define LOG_ERR(str,...) LOG_PRINT("ERR", str, ## __VA_ARGS__)
+
+#if (LOG_LEVEL <= LOG_LVL_INFO)
+ #define LOG_WARN(str,...) LOG_PRINT("WARN", str, ## __VA_ARGS__)
+ #define LOG_INFO(str,...) LOG_PRINT("INFO", str, ## __VA_ARGS__)
-#elif (LOG_LEVEL <= DBG_LOG_WARNING)
- #define LOG_WARNING(str,...) DBG_WARNING(LOG_LEVEL, LOG_VERBOSE, str, ## __VA_ARGS__)
+#elif (LOG_LEVEL <= LOG_LVL_WARN)
+ #define LOG_WARN(str,...) LOG_PRINT("WARN", str, ## __VA_ARGS__)
#define LOG_INFO(str,...) /* Nothing */
-#else /* LOG_LEVEL <= DBG_LOG_ERROR */
- #define LOG_WARNING(str,...) /* Nothing */
+#else /* LOG_LEVEL <= LOG_LVL_ERR */
+ #define LOG_WARN(str,...) /* Nothing */
#define LOG_INFO(str,...) /* Nothing */
#endif
projects / bertos.git / commitdiff