Update board presets.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3761 38d2e660-2303-0410-9eaa-f027e97ec537

diff --git a/boards/ek-lm3s1968/examples/gps/main.c b/boards/ek-lm3s1968/examples/gps/main.c
index afa799b66adc1a940d2624b60cc902e3f47003f3..5e32dc5ef8a0af6c4268c4609da7bd1465185563 100644 (file)
--- a/boards/ek-lm3s1968/examples/gps/main.c
+++ b/boards/ek-lm3s1968/examples/gps/main.c
@@ -517,7 +517,7 @@ static struct MenuItem main_items[] =
 
 static struct Menu main_menu =
 {
-       main_items, "DevelGPS v0.1", MF_STICKY | MF_SAVESEL, &lcd_bitmap, 0
+       main_items, "DevelGPS v0.1", MF_STICKY | MF_SAVESEL, &lcd_bitmap, 0, rit128x96_blitBitmap
 };
 
 static void init(void)

diff --git a/boards/ek-lm3s1968/hw/hw_rit128x96.h b/boards/ek-lm3s1968/hw/hw_rit128x96.h
index 7ccdeb1d4b59565687c3c2a87364dc28e012203d..f31bd56beca7cbe175386f2b6a614f289472844b 100644 (file)
--- a/boards/ek-lm3s1968/hw/hw_rit128x96.h
+++ b/boards/ek-lm3s1968/hw/hw_rit128x96.h
@@ -123,6 +123,5 @@ INLINE void lcd_bus_init(void)
  * XXX: menu stuff requires lcd_blitBimap() function to be defined.
  * Find a better way to do this.
  */
-#define rit128x96_blitBitmap lcd_blitBitmap
 
 #endif /* HW_RIT128x96_H */

diff --git a/boards/ek-lpc-p2378/hw/hw_rit128x96.h b/boards/ek-lpc-p2378/hw/hw_rit128x96.h
new file mode 100644 (file)
index 0000000..2b7caa7
--- /dev/null
+++ b/boards/ek-lpc-p2378/hw/hw_rit128x96.h
@@ -0,0 +1,122 @@
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief LM3S1986: OLED-RIT-128x96 (P14201) low-level hardware macros
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ */
+
+#ifndef HW_RIT128x96_H
+#define HW_RIT128x96_H
+
+#include "cfg/macros.h"   /* BV() */
+#include "cfg/debug.h"
+
+#include <cpu/attr.h>
+#include <cpu/irq.h>
+#include <cpu/types.h>
+
+#include <drv/clock_lm3s.h>
+#include <drv/ssi_lm3s.h>
+#include <drv/gpio_lm3s.h>
+
+/**
+ * \name LCD I/O pins/ports
+ * @{
+ */
+/* OLED Data/Command control pin */
+#define GPIO_OLEDDC_PIN             BV(2)
+
+/* OLED enable pin */
+#define GPIO_OLEDEN_PIN             BV(3)
+/*@}*/
+
+/**
+ * \name LCD bus control macros
+ * @{
+ */
+/* Enter command mode */
+#define LCD_SET_COMMAND() \
+       lm3s_gpioPinWrite(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN, 0)
+
+/* Enter data mode */
+#define LCD_SET_DATA() \
+       lm3s_gpioPinWrite(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN, GPIO_OLEDDC_PIN)
+
+/* Send data to the display */
+#define LCD_WRITE(x)                                                   \
+       {                                                               \
+               uint32_t _x;                                            \
+               while (!lm3s_ssiWriteFrameNonBlocking(SSI0_BASE, x));   \
+               /* Dummy read to drain the FIFO */                      \
+               while (!lm3s_ssiReadFrameNonBlocking(SSI0_BASE, &_x));  \
+       }
+/*@}*/
+
+INLINE void lcd_bus_init(void)
+{
+       uint32_t dummy;
+
+       /* Enable the peripheral clock */
+       SYSCTL_RCGC1_R |= SYSCTL_RCGC1_SSI0;
+       SYSCTL_RCGC2_R |= SYSCTL_RCGC2_GPIOA;
+       SYSCTL_RCGC2_R |= SYSCTL_RCGC2_GPIOH;
+       lm3s_busyWait(512);
+
+       /* Configure the SSI0CLK and SSIOTX pins for SSI operation. */
+       lm3s_gpioPinConfig(GPIO_PORTA_BASE, BV(2) | BV(3) | BV(5),
+               GPIO_DIR_MODE_HW, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD_WPU);
+       /*
+        * Configure the GPIO port pin used as a D/C# signal (data/command
+        * control) for OLED device, and the port pin used to enable power to
+        * the OLED panel.
+        */
+       lm3s_gpioPinConfig(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN | GPIO_OLEDEN_PIN,
+               GPIO_DIR_MODE_OUT, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD);
+       lm3s_gpioPinWrite(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN | GPIO_OLEDEN_PIN,
+                       GPIO_OLEDDC_PIN | GPIO_OLEDEN_PIN);
+
+       /* Configure the SSI0 port for master mode */
+       lm3s_ssiOpen(SSI0_BASE, SSI_FRF_MOTO_MODE_2,
+                       SSI_MODE_MASTER, CPU_FREQ / 2, 8);
+       /*
+        * Configure the GPIO port pin used as a D/Cn signal for OLED device,
+        * and the port pin used to enable power to the OLED panel.
+        */
+       lm3s_gpioPinConfig(GPIO_PORTA_BASE, GPIO_OLEDEN_PIN,
+               GPIO_DIR_MODE_HW, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD_WPU);
+
+       /* Drain the SSI RX FIFO */
+       while (lm3s_ssiReadFrameNonBlocking(SSI0_BASE, &dummy));
+}
+
+#endif /* HW_RIT128x96_H */