--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief HW pin handling for WM8731 audio codec.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef HW_WM8731_H
+#define HW_WM8731_H
+
+#include <cfg/macros.h>
+#include <io/cm3.h>
+
+#define WM8731_PIN_INIT() \
+ do { \
+ /* implement me */ \
+ } while (0)
+
+#define WM8731_MCLK_INIT() \
+ do { \
+ /* Disable PIO on PB22 connected to mclk of the wm8731 codec */ \
+ PIOB_PDR = BV(22); \
+ /* Select the output clock on same pin */ \
+ PIO_PERIPH_SEL(PIOB_BASE, BV(22), PIO_PERIPH_B); \
+ /* Prescale the cpu clock to the frequenzy that we want. */\
+ /* (multiply value of audio sample rate) */\
+ PMC_PCK0 = PMC_PCK_CSS_PLL | PMC_PCK_PRES_CLK_4; \
+ /* Enable the clock and wait until it starts correctly */ \
+ PMC_SCER = BV(PMC_PCK0_ID); \
+ while ((PMC_SR & BV(PMC_PCKRDY0)) == 0); \
+ } while(0)
+
+
+#endif /* HW_WM8731_H */