Make hw files more generic.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@2834 38d2e660-2303-0410-9eaa-f027e97ec537

diff --git a/bertos/hw/hw_sd.h b/bertos/hw/hw_sd.h
index 754b87cec5fb613e4eff34d81245dc0de78e99f8..d15b550668e182ed38ce2458cd94a37c6bd3db7e 100644 (file)
--- a/bertos/hw/hw_sd.h
+++ b/bertos/hw/hw_sd.h
@@ -40,12 +40,14 @@
 #ifndef HW_SD_H
 #define HW_SD_H
 
-#define SD_CS_INIT() do { PIOA_PER = BV(11); PIOA_OER = BV(11); } while(0)
-#define SD_CS_ON()   do { PIOA_CODR = BV(11); } while(0)
-#define SD_CS_OFF()  do { PIOA_SODR = BV(11); } while(0)
+#warning FIXME: This is an example implementation, you must implement it
 
-#define SD_PIN_INIT()      do { PIOA_PER = BV(30) | BV(31); PIOA_PUER = BV(30) | BV(31); } while(0)
-#define SD_CARD_PRESENT()  (!(PIOA_PDSR & BV(31)))
-#define SD_WRITE_PROTECT() ((PIOA_PDSR & BV(30)))
+#define SD_CS_INIT() do { /* implement me */} while(0)
+#define SD_CS_ON()   do { /* implement me */} while(0)
+#define SD_CS_OFF()  do { /* implement me */} while(0)
+
+#define SD_PIN_INIT()      do { /* implement me */} while(0)
+#define SD_CARD_PRESENT()  true /* implement me */
+#define SD_WRITE_PROTECT() false /* implement me */
 
 #endif /* HW_SD_H */

diff --git a/bertos/hw/hw_tas5706a.h b/bertos/hw/hw_tas5706a.h
index e67a14050902ebfc521798a04d7d387d2ec7385a..33132ec3a629fb01204d545942e06ff98ce8639e 100644 (file)
--- a/bertos/hw/hw_tas5706a.h
+++ b/bertos/hw/hw_tas5706a.h
@@ -43,26 +43,23 @@
 #include <io/arm.h>
 #include <cfg/macros.h>
 
-#define TAS5706A_SETPOWERDOWN(val) do { if (val) PIOA_CODR = BV(6); else PIOA_SODR = BV(6); } while (0)
-#define TAS5706A_SETRESET(val)     do { if (val) PIOA_CODR = BV(7); else PIOA_SODR = BV(7); } while (0)
-#define TAS5706A_SETMUTE(val)      do { if (val) PIOA_CODR = BV(8); else PIOA_SODR = BV(8); } while (0)
+#warning FIXME: This is an example implementation, you must implement it
+
+#define TAS5706A_SETPOWERDOWN(val) do { /* implement me */ } while (0)
+#define TAS5706A_SETRESET(val)     do { /* implement me */ } while (0)
+#define TAS5706A_SETMUTE(val)      do { /* implement me */ } while (0)
 
 #define TAS5706A_PIN_INIT() \
        do { \
                TAS5706A_SETPOWERDOWN(true); \
                TAS5706A_SETRESET(true); \
                TAS5706A_SETMUTE(true); \
-               PIOA_PER = BV(6) | BV(7) | BV(8); \
-               PIOA_OER = BV(6) | BV(7) | BV(8); \
+               /* complete me */ \
        } while (0)
 
 #define TAS5706A_MCLK_INIT() \
        do { \
-               PIOA_PDR = BV(2); /* enable PWM pin */ \
-               PWM_CMR2 = 0; /* set prescaler to MCK, left aligned, start with low level */ \
-               PWM_CPRD2 = 4; /* 11.2896 MHz MCLK */ \
-               PWM_CDTY2 = 2; /* 50% duty */ \
-               PWM_ENA = BV(2); /* Enable PWM on MCLK pin */ \
+               /* implement me */ \
        } while(0)