New triface devlib application.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@615 38d2e660-2303-0410-9eaa-f027e97ec537

diff --git a/app/triface/appconfig.h b/app/triface/appconfig.h
new file mode 100755 (executable)
index 0000000..9bbd996
--- /dev/null
+++ b/app/triface/appconfig.h
@@ -0,0 +1,137 @@
+/*!
+ * \file
+ * <!--
+ * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
+ * This file is part of DevLib - See README.devlib for information.
+ * -->
+ *
+ * \brief DevLib configuration options
+ *
+ * You should copy this header in your project and rename it to
+ * "config.h" and delete the CONFIG_ macros for the modules
+ * you're not using.
+ *
+ * <h2>Working with multiple applications</h2>
+ *
+ * If your project is made of multiple DevLib-based applications,
+ * create a custom "config.h" file in each application subdirectory
+ * and play with the compiler include path to get the desired result.
+ * You can share common options by creationg a "config_common.h" header
+ * and including it from all your "config.h" copies.
+ *
+ * <h2>Configuration style</h2>
+ *
+ * For improved compile-time checking of configuration options,
+ * the preferred way to use a \c CONFIG_ symbol is keeping it
+ * always defined with a value of either 0 or 1.  This lets
+ * you write tests like this:
+ *
+ * \code
+ *  #if CONFIG_FOO
+ *  void foo(void)
+ *  {
+ *      if (CONFIG_BAR)
+ *          bar();
+ *  }
+ *  #endif // CONFIG_FOO
+ * \endcode
+ *
+ * In most cases, we rely on the optimizer to discard checks
+ * on constant values and performing dead-code elimination.
+ *
+ * \version $Id$
+ * \author Bernardo Innocenti <bernie@develer.com>
+ * \author Stefano Fedrigo <aleph@develer.com>
+ */
+
+/*#*
+ *#* $Log$
+ *#* Revision 1.1  2006/05/18 00:41:47  bernie
+ *#* New triface devlib application.
+ *#*
+ *#*/
+
+#ifndef APPCONFIG_TRIFACE_H
+#define APPCONFIG_TRIFACE_H
+
+/** Baud-rate for the kdebug console */
+#define CONFIG_KDEBUG_BAUDRATE  38400
+
+/**
+ * printf()-style formatter configuration.
+ *
+ * \sa PRINTF_DISABLED
+ * \sa PRINTF_NOMODIFIERS
+ * \sa PRINTF_REDUCED
+ * \sa PRINTF_NOFLOAT
+ * \sa PRINTF_FULL
+ */
+#define CONFIG_PRINTF PRINTF_FULL
+
+/**
+ * Multithreading kernel.
+ *
+ * \sa config_kern.h
+ */
+#define CONFIG_KERNEL 0
+
+/**
+ * \name Serial driver parameters
+ * \{
+ */
+       /** [bytes] Size of the outbound FIFO buffer for port 0. */
+       #define CONFIG_UART0_TXBUFSIZE  32
+
+       /** [bytes] Size of the inbound FIFO buffer for port 0. */
+       #define CONFIG_UART0_RXBUFSIZE  64
+
+       /** [bytes] Size of the outbound FIFO buffer for port 1. */
+       #define CONFIG_UART1_TXBUFSIZE  32
+
+       /** [bytes] Size of the inbound FIFO buffer for port 1. */
+       #define CONFIG_UART1_RXBUFSIZE  64
+
+       /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+       #define CONFIG_SPI_TXBUFSIZE    16
+
+       /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+       #define CONFIG_SPI_RXBUFSIZE    32
+
+       /** Default transmit timeout (ms). Set to -1 to disable timeout support */
+       #define CONFIG_SER_TXTIMEOUT    -1
+
+       /** Default receive timeout (ms). Set to -1 to disable timeout support */
+       #define CONFIG_SER_RXTIMEOUT    -1
+
+       /** Use RTS/CTS handshake */
+       #define CONFIG_SER_HWHANDSHAKE   0
+
+       /** Default baud rate (set to 0 to disable) */
+       #define CONFIG_SER_DEFBAUDRATE   0
+
+       /** Enable ser_gets() and ser_gets_echo() */
+       #define CONFIG_SER_GETS          0
+
+       /** Enable second serial port in emulator. */
+       #define CONFIG_EMUL_UART1        0
+
+       /**
+        * Transmit always something on serial port 0 TX
+        * to avoid interference when sending burst of data,
+        * using AVR multiprocessor serial mode
+        */
+       #define CONFIG_SER_TXFILL        0
+
+       #define CONFIG_SER_STROBE        0
+/*\}*/
+
+/// Hardware timer selection for drv/timer.c
+#define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
+
+/// Debug timer interrupt using a strobe pin.
+#define CONFIG_TIMER_STROBE  0
+
+/// Enable watchdog timer.
+#define CONFIG_WATCHDOG  0
+
+#endif /* APPCONFIG_TRIFACE_H */

diff --git a/app/triface/hw/hw_cpu.h b/app/triface/hw/hw_cpu.h
new file mode 100755 (executable)
index 0000000..34729cb
--- /dev/null
+++ b/app/triface/hw/hw_cpu.h
@@ -0,0 +1,38 @@
+/**
+ * \file
+ * <!--
+ * Copyright 2006 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Hardware-specific definitions
+ *
+ * \version $Id$
+ *
+ * \author Bernardo Innocenti <bernie@develer.com>
+ */
+
+/*#*
+ *#* $Log$
+ *#* Revision 1.1  2006/05/18 00:41:47  bernie
+ *#* New triface devlib application.
+ *#*
+ *#*/
+
+#ifndef TRIFACE_HW_H
+#define TRIFACE_HW_H
+
+#include <appconfig.h>
+
+/// CPU Clock frequency (14.7456 MHz)
+#define CLOCK_FREQ     (14745600UL)
+
+
+/* Timer IRQ strobe */
+//#if CONFIG_TIMER_STROBE
+//     #define TIMER_STROBE_ON    ATOMIC(PORTD |= BV(PD0))
+//     #define TIMER_STROBE_OFF   ATOMIC(PORTD &= ~BV(PD0))
+//     #define TIMER_STROBE_INIT  ATOMIC(PORTD &= ~BV(PD0); DDRD |= BV(PD0))
+//#endif /* CONFIG_TIMER_STROBE */
+
+#endif /* TRIFACE_HW_H */

diff --git a/app/triface/hw/hw_ser.h b/app/triface/hw/hw_ser.h
new file mode 100755 (executable)
index 0000000..e69de29

diff --git a/app/triface/triface.c b/app/triface/triface.c
new file mode 100755 (executable)
index 0000000..c063808
--- /dev/null
+++ b/app/triface/triface.c
@@ -0,0 +1,47 @@
+/**
+ * \file
+ * <!--
+ * Copyright 2006 Develer S.r.l. (http://www.develer.com/)
+ * This file is part of DevLib - See README.devlib for information.
+ * -->
+ *
+ * \version $Id$
+ *
+ * \author Marco Benelli <marco@develer.com>
+ * \author Bernardo Innocenti <bernie@develer.com>
+ *
+ * \brief Windowing system test.
+ */
+
+/*#*
+ *#* $Log$
+ *#* Revision 1.1  2006/05/18 00:41:47  bernie
+ *#* New triface devlib application.
+ *#*
+ *#*/
+
+#include <drv/timer.h>
+#include <drv/buzzer.h>
+#include <drv/ser.h>
+#include <cfg/macros.h>
+
+int main(void)
+{
+       kdbg_init();
+       timer_init();
+//     buz_init();
+
+       IRQ_ENABLE;
+
+       Serial *host_port = ser_open(0);
+       ser_setbaudrate(host_port, 38400);
+
+
+       // Main loop
+       for(;;)
+       {
+               ser_print(host_port, "Hello, world!\r\n");
+       }
+
+       return 0;
+}

diff --git a/app/triface/triface.mk b/app/triface/triface.mk
new file mode 100755 (executable)
index 0000000..990a68e
--- /dev/null
+++ b/app/triface/triface.mk
@@ -0,0 +1,41 @@
+#
+# $Id$
+# Copyright 2006 Develer S.r.l. (http://www.develer.com/)
+# All rights reserved.
+#
+# Makefile fragment for DevLib demo application.
+#
+# Author: Bernardo Innocenti <bernie@develer.com>
+#
+# $Log$
+# Revision 1.1  2006/05/18 00:41:47  bernie
+# New triface devlib application.
+#
+#
+
+
+# Set to 1 for debug builds
+demo_DEBUG = 1
+
+# Our target application
+TRG += triface
+
+triface_CSRC = \
+       app/triface/triface.c \
+       drv/timer.c \
+       drv/ser.c \
+       drv/ser_avr.c \
+       mware/formatwr.c \
+       mware/hex.c \
+
+#      drv/buzzer.c
+
+triface_CFLAGS = -Os -D'ARCH=0' -Iapp/triface/hw -Iapp/triface
+triface_MCU = atmega128
+
+# Debug stuff
+ifeq ($(triface_DEBUG),1)
+       triface_CFLAGS += -D_DEBUG
+#      triface_PCSRC += drv/kdebug.c
+endif
+