*/
-#ifndef DATAFLASH_H
-#define DATAFLASH_H
+#ifndef DRV_DATAFLASH_H
+#define DRV_DATAFLASH_H
#include <kern/kfile.h>
#include <cfg/compiler.h>
/**
* Type definition for dflash memory.
*/
-typedef uint32_t dflashAddr_t;
-typedef uint32_t dflashSize_t;
+typedef uint32_t dataflashAddr_t;
+typedef uint32_t dataflashSize_t;
#define RESET_PULSE_WIDTH 10 // Width of reset pulse in usec.
#define BUSY_BIT 0x80 // Select a busy bit in status register.
* level is low.
* \{
*/
-#define RESET PC0 ///< Connect to RESET pin of flash memory
-#define WP PC1 ///< Connect to WP pin of flash memory
-#define DFLASH_PORT PORTC ///< Micro pin PORT register.
-#define DFLASH_PIN PINC ///< Micro pin PIN register.
-#define DFLASH_DDR DDRC ///< Micro pin DDR register.
+#define RESET PC0 ///< Connect to RESET pin of flash memory
+#define WP PC1 ///< Connect to WP pin of flash memory
+#define DATAFLASH_PORT PORTC ///< Micro pin PORT register.
+#define DATAFLASH_PIN PINC ///< Micro pin PIN register.
+#define DATAFLASH_DDR DDRC ///< Micro pin DDR register.
/* \} */
/**
*
* \{
*/
-#define RESET_LOW() do { DFLASH_PORT &= ~BV(RESET); } while(0)
-#define RESET_HIGH() do { DFLASH_PORT |= BV(RESET); } while(0)
-#define WP_LOW() do { DFLASH_PORT &= ~BV(WP); } while(0)
-#define WP_HIGH() do { DFLASH_PORT |= BV(WP); } while(0)
+#define RESET_LOW() do { DATAFLASHs_PORT &= ~BV(RESET); } while(0)
+#define RESET_HIGH() do { DATAFLASH_PORT |= BV(RESET); } while(0)
+#define WP_LOW() do { DATAFLASH_PORT &= ~BV(WP); } while(0)
+#define WP_HIGH() do { DATAFLASH_PORT |= BV(WP); } while(0)
/* \} */
/**
*
* \{
*/
-#define RESET_OUT() do { DFLASH_DDR |= BV(RESET); } while(0)
-#define WP_OUT() do { DFLASH_DDR |= BV(WP); } while(0)
+#define RESET_OUT() do { DATAFLASH_DDR |= BV(RESET); } while(0)
+#define WP_OUT() do { DATAFLASH_DDR |= BV(WP); } while(0)
#define WRITE_ENABLE() WP_HIGH()
#define WRITE_DISABLE() WP_LOW()
#define RESET_ENABLE() RESET_LOW()
* Memory definition.
*
* \note Below are defined valid flash memory support to
- * this drive. Every time we call dflash_init() function we check
- * if memory defined are right (see dflash.c form more detail).
+ * this drive. Every time we call dataflash_init() function we check
+ * if memory defined are right (see dataflash.c form more detail).
* \{
*/
-#define DFLASH_AT45DB041B 1
-#define DFLASH_AT45DB081D 2
-#define DFLASH_AT45DB161D 3
-
-#if CONFIG_DATA_FLASH == DFLASH_AT45DB161D
- #define DFLASH_ID_DEVICE_DENSITY 0xb ///< This indicate AT45DB161D data flah memory.
- #define DFLASH_PAGE_SIZE 528 ///< Number of byte in one page.
- #define DFLASH_PAGE_ADDRESS_BIT 10 ///< Number bit for addressing one page.
- #define DFLASH_NUM_PAGE 4096 ///< Number page in data flash memory.
-#elif CONFIG_DATA_FLASH == DFLASH_AT45DB081D
- #define DFLASH_ID_DEVICE_DENSITY 0x9 ///< This indicate AT45DB081D data flah memory.
- #define DFLASH_PAGE_SIZE 264 ///< Number of byte in one page.
- #define DFLASH_PAGE_ADDRESS_BIT 9 ///< Number bit for addressing one page.
- #define DFLASH_NUM_PAGE 4096 ///< Number page in data flash memory.
-#elif CONFIG_DATA_FLASH == DFLASH_AT45DB041B
- #define DFLASH_ID_DEVICE_DENSITY 0x7 ///< This indicate AT45DB041B data flah memory.
- #define DFLASH_PAGE_SIZE 264 ///< Number of byte in one page.
- #define DFLASH_PAGE_ADDRESS_BIT 9 ///< Number bit for addressing one page.
- #define DFLASH_NUM_PAGE 2048 ///< Number page in data flash memory.
+#define DATAFLASH_AT45DB041B 1
+#define DATAFLASH_AT45DB081D 2
+#define DATAFLASH_AT45DB161D 3
+
+#if CONFIG_DATA_FLASH == DATAFLASH_AT45DB161D
+ #define DATAFLASH_ID_DEVICE_DENSITY 0xb ///< This indicate AT45DB161D data flah memory.
+ #define DATAFLASH_PAGE_SIZE 528 ///< Number of byte in one page.
+ #define DATAFLASH_PAGE_ADDRESS_BIT 10 ///< Number bit for addressing one page.
+ #define DATAFLASH_NUM_PAGE 4096 ///< Number page in data flash memory.
+#elif CONFIG_DATA_FLASH == DATAFLASH_AT45DB081D
+ #define DATAFLASH_ID_DEVICE_DENSITY 0x9 ///< This indicate AT45DB081D data flah memory.
+ #define DATAFLASH_PAGE_SIZE 264 ///< Number of byte in one page.
+ #define DATAFLASH_PAGE_ADDRESS_BIT 9 ///< Number bit for addressing one page.
+ #define DATAFLASH_NUM_PAGE 4096 ///< Number page in data flash memory.
+#elif CONFIG_DATA_FLASH == DATAFLASH_AT45DB041B
+ #define DATAFLASH_ID_DEVICE_DENSITY 0x7 ///< This indicate AT45DB041B data flah memory.
+ #define DATAFLASH_PAGE_SIZE 264 ///< Number of byte in one page.
+ #define DATAFLASH_PAGE_ADDRESS_BIT 9 ///< Number bit for addressing one page.
+ #define DATAFLASH_NUM_PAGE 2048 ///< Number page in data flash memory.
#else
#error Nothing memory defined in CONFIG_DATA_FLASH are support.
#endif
* \{
*/
-#if CONFIG_DATA_FLASH == DFLASH_AT45DB081D || CONFIG_DATA_FLASH == AT45DB161D
+#if CONFIG_DATA_FLASH == DATAFLASH_AT45DB081D || CONFIG_DATA_FLASH == AT45DB161D
DFO_READ_FLASH_MEM_BYTE = 0x0B, ///< Continuos array read.
-#elif CONFIG_DATA_FLASH == DFLASH_AT45DB041B
+#elif CONFIG_DATA_FLASH == DATAFLASH_AT45DB041B
DFO_READ_FLASH_MEM_BYTE = 0xE8, ///< Continuos array read.
#else
#error No supported memory defined in CONFIG_DATA_FLASH.
/* \}*/
} DFlashOpcode;
-void dflash_init(struct _KFile *fd)
+void dataflash_init(struct _KFile *fd)
-#endif /* DATAFLASH_H */
+#endif /* DRV_DATAFLASH_H */
projects / bertos.git / commitdiff