Update hw files.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@4115 38d2e660-2303-0410-9eaa-f027e97ec537

diff --git a/boards/arduino/hw/hw_i2c_bitbang.h b/boards/arduino/hw/hw_i2c_bitbang.h
index 8f3fbf5e88a5771876dd8a9130a20331e52b3329..6aabb46d6a1bb063eaeff211f73b13631b1c1ba7 100644 (file)
--- a/boards/arduino/hw/hw_i2c_bitbang.h
+++ b/boards/arduino/hw/hw_i2c_bitbang.h
@@ -62,4 +62,66 @@
  */
 #define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0)
 
+
+/*
+ * New api
+ */
+#include <cfg/compiler.h>
+
+INLINE void i2c_sdaHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA High by setting SDA pin as input */
+}
+
+INLINE void i2c_sdaLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA Low by setting SDA pin as open collector output */
+}
+
+INLINE void i2c_sclHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL High by setting SCL pin as input */
+}
+
+INLINE void i2c_sclLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL Low by setting SCL pin as open collector output */
+}
+
+INLINE bool i2c_sdaIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SDA pin state */
+       return true;
+}
+
+INLINE bool i2c_sclIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SCL pin state */
+       return true;
+}
+
+/**
+ * Half bit delay routine used to generate the correct timings.
+ */
+INLINE void i2c_halfbitDelay(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
+/**
+ * This macro should set SDA and SCL lines as input.
+ */
+INLINE void i2c_bitbangInit(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
 #endif /* HW_I2C_BITBANG_H */

diff --git a/boards/at91sam7s-ek/hw/hw_i2c_bitbang.h b/boards/at91sam7s-ek/hw/hw_i2c_bitbang.h
index 8f3fbf5e88a5771876dd8a9130a20331e52b3329..6aabb46d6a1bb063eaeff211f73b13631b1c1ba7 100644 (file)
--- a/boards/at91sam7s-ek/hw/hw_i2c_bitbang.h
+++ b/boards/at91sam7s-ek/hw/hw_i2c_bitbang.h
@@ -62,4 +62,66 @@
  */
 #define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0)
 
+
+/*
+ * New api
+ */
+#include <cfg/compiler.h>
+
+INLINE void i2c_sdaHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA High by setting SDA pin as input */
+}
+
+INLINE void i2c_sdaLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA Low by setting SDA pin as open collector output */
+}
+
+INLINE void i2c_sclHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL High by setting SCL pin as input */
+}
+
+INLINE void i2c_sclLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL Low by setting SCL pin as open collector output */
+}
+
+INLINE bool i2c_sdaIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SDA pin state */
+       return true;
+}
+
+INLINE bool i2c_sclIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SCL pin state */
+       return true;
+}
+
+/**
+ * Half bit delay routine used to generate the correct timings.
+ */
+INLINE void i2c_halfbitDelay(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
+/**
+ * This macro should set SDA and SCL lines as input.
+ */
+INLINE void i2c_bitbangInit(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
 #endif /* HW_I2C_BITBANG_H */

diff --git a/boards/at91sam7x-ek/hw/hw_i2c_bitbang.h b/boards/at91sam7x-ek/hw/hw_i2c_bitbang.h
index 8f3fbf5e88a5771876dd8a9130a20331e52b3329..6aabb46d6a1bb063eaeff211f73b13631b1c1ba7 100644 (file)
--- a/boards/at91sam7x-ek/hw/hw_i2c_bitbang.h
+++ b/boards/at91sam7x-ek/hw/hw_i2c_bitbang.h
@@ -62,4 +62,66 @@
  */
 #define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0)
 
+
+/*
+ * New api
+ */
+#include <cfg/compiler.h>
+
+INLINE void i2c_sdaHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA High by setting SDA pin as input */
+}
+
+INLINE void i2c_sdaLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA Low by setting SDA pin as open collector output */
+}
+
+INLINE void i2c_sclHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL High by setting SCL pin as input */
+}
+
+INLINE void i2c_sclLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL Low by setting SCL pin as open collector output */
+}
+
+INLINE bool i2c_sdaIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SDA pin state */
+       return true;
+}
+
+INLINE bool i2c_sclIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SCL pin state */
+       return true;
+}
+
+/**
+ * Half bit delay routine used to generate the correct timings.
+ */
+INLINE void i2c_halfbitDelay(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
+/**
+ * This macro should set SDA and SCL lines as input.
+ */
+INLINE void i2c_bitbangInit(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
 #endif /* HW_I2C_BITBANG_H */

diff --git a/boards/ek-lm3s1968/hw/hw_i2c_bitbang.h b/boards/ek-lm3s1968/hw/hw_i2c_bitbang.h
index 8f3fbf5e88a5771876dd8a9130a20331e52b3329..6aabb46d6a1bb063eaeff211f73b13631b1c1ba7 100644 (file)
--- a/boards/ek-lm3s1968/hw/hw_i2c_bitbang.h
+++ b/boards/ek-lm3s1968/hw/hw_i2c_bitbang.h
@@ -62,4 +62,66 @@
  */
 #define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0)
 
+
+/*
+ * New api
+ */
+#include <cfg/compiler.h>
+
+INLINE void i2c_sdaHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA High by setting SDA pin as input */
+}
+
+INLINE void i2c_sdaLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA Low by setting SDA pin as open collector output */
+}
+
+INLINE void i2c_sclHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL High by setting SCL pin as input */
+}
+
+INLINE void i2c_sclLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL Low by setting SCL pin as open collector output */
+}
+
+INLINE bool i2c_sdaIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SDA pin state */
+       return true;
+}
+
+INLINE bool i2c_sclIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SCL pin state */
+       return true;
+}
+
+/**
+ * Half bit delay routine used to generate the correct timings.
+ */
+INLINE void i2c_halfbitDelay(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
+/**
+ * This macro should set SDA and SCL lines as input.
+ */
+INLINE void i2c_bitbangInit(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
 #endif /* HW_I2C_BITBANG_H */

diff --git a/boards/lpc-p2378/hw/hw_i2c_bitbang.h b/boards/lpc-p2378/hw/hw_i2c_bitbang.h
index 8f3fbf5e88a5771876dd8a9130a20331e52b3329..6aabb46d6a1bb063eaeff211f73b13631b1c1ba7 100644 (file)
--- a/boards/lpc-p2378/hw/hw_i2c_bitbang.h
+++ b/boards/lpc-p2378/hw/hw_i2c_bitbang.h
@@ -62,4 +62,66 @@
  */
 #define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0)
 
+
+/*
+ * New api
+ */
+#include <cfg/compiler.h>
+
+INLINE void i2c_sdaHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA High by setting SDA pin as input */
+}
+
+INLINE void i2c_sdaLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA Low by setting SDA pin as open collector output */
+}
+
+INLINE void i2c_sclHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL High by setting SCL pin as input */
+}
+
+INLINE void i2c_sclLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL Low by setting SCL pin as open collector output */
+}
+
+INLINE bool i2c_sdaIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SDA pin state */
+       return true;
+}
+
+INLINE bool i2c_sclIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SCL pin state */
+       return true;
+}
+
+/**
+ * Half bit delay routine used to generate the correct timings.
+ */
+INLINE void i2c_halfbitDelay(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
+/**
+ * This macro should set SDA and SCL lines as input.
+ */
+INLINE void i2c_bitbangInit(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
 #endif /* HW_I2C_BITBANG_H */

diff --git a/boards/stm32-p103/hw/hw_i2c_bitbang.h b/boards/stm32-p103/hw/hw_i2c_bitbang.h
index 8f3fbf5e88a5771876dd8a9130a20331e52b3329..6aabb46d6a1bb063eaeff211f73b13631b1c1ba7 100644 (file)
--- a/boards/stm32-p103/hw/hw_i2c_bitbang.h
+++ b/boards/stm32-p103/hw/hw_i2c_bitbang.h
@@ -62,4 +62,66 @@
  */
 #define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0)
 
+
+/*
+ * New api
+ */
+#include <cfg/compiler.h>
+
+INLINE void i2c_sdaHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA High by setting SDA pin as input */
+}
+
+INLINE void i2c_sdaLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA Low by setting SDA pin as open collector output */
+}
+
+INLINE void i2c_sclHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL High by setting SCL pin as input */
+}
+
+INLINE void i2c_sclLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL Low by setting SCL pin as open collector output */
+}
+
+INLINE bool i2c_sdaIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SDA pin state */
+       return true;
+}
+
+INLINE bool i2c_sclIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SCL pin state */
+       return true;
+}
+
+/**
+ * Half bit delay routine used to generate the correct timings.
+ */
+INLINE void i2c_halfbitDelay(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
+/**
+ * This macro should set SDA and SCL lines as input.
+ */
+INLINE void i2c_bitbangInit(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
 #endif /* HW_I2C_BITBANG_H */

diff --git a/boards/triface/hw/hw_i2c_bitbang.h b/boards/triface/hw/hw_i2c_bitbang.h
index 8f3fbf5e88a5771876dd8a9130a20331e52b3329..6aabb46d6a1bb063eaeff211f73b13631b1c1ba7 100644 (file)
--- a/boards/triface/hw/hw_i2c_bitbang.h
+++ b/boards/triface/hw/hw_i2c_bitbang.h
@@ -62,4 +62,66 @@
  */
 #define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0)
 
+
+/*
+ * New api
+ */
+#include <cfg/compiler.h>
+
+INLINE void i2c_sdaHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA High by setting SDA pin as input */
+}
+
+INLINE void i2c_sdaLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SDA Low by setting SDA pin as open collector output */
+}
+
+INLINE void i2c_sclHi(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL High by setting SCL pin as input */
+}
+
+INLINE void i2c_sclLo(int dev)
+{
+       (void)(dev);
+       /* Implement me:Set SCL Low by setting SCL pin as open collector output */
+}
+
+INLINE bool i2c_sdaIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SDA pin state */
+       return true;
+}
+
+INLINE bool i2c_sclIn(int dev)
+{
+       (void)(dev);
+       /* Implement me: read SCL pin state */
+       return true;
+}
+
+/**
+ * Half bit delay routine used to generate the correct timings.
+ */
+INLINE void i2c_halfbitDelay(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
+/**
+ * This macro should set SDA and SCL lines as input.
+ */
+INLINE void i2c_bitbangInit(int dev)
+{
+       (void)(dev);
+       /* Implement me! */
+}
+
 #endif /* HW_I2C_BITBANG_H */