From: batt Date: Fri, 28 May 2010 14:55:34 +0000 (+0000) Subject: Remove old tests. X-Git-Tag: 2.5.0~41 X-Git-Url: https://codewiz.org/gitweb?a=commitdiff_plain;ds=sidebyside;h=ccd15e30330f168e9c48aab01b8efb81e4b39998;hp=391b4f8d9c82c413f2cd11fb3ba3aeb311f62184;p=bertos.git Remove old tests. git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3876 38d2e660-2303-0410-9eaa-f027e97ec537 --- diff --git a/examples/at91sam7/at91sam7.c b/examples/at91sam7/at91sam7.c deleted file mode 100644 index b8ef86c8..00000000 --- a/examples/at91sam7/at91sam7.c +++ /dev/null @@ -1,196 +0,0 @@ -/** - * \file - * - * - * \version $Id$ - * - * \author Francesco Sacchi - * \author Daniele Basile - * - * \brief Simple BeRTOS test on AT91SAM7X-EK evaluation board. - * - * This short program shows you a simple demo of some BeRTOS feature: - * - * - Debug system - * - Timer interrupt - * - Serial - * - Cooperative BeRTOS Kernel - * - */ - -#include "cfg/cfg_ser.h" -#include - -#include -#include - -#include - -#include -#include -#include - -#include - -Timer leds_timer; -Serial ser_fd; - -enum -{ - FORWARD, - BACKWARD, -}; - -int direction = FORWARD; - -static void leds_init(void) -{ - #if CPU_ARM_AT91SAM7X256 - /* Set PB19..22 connected to PIOB */ - PIOB_PER = 0x780000; - /* Set PB19..22 as output */ - PIOB_OER = 0x780000; - - /* Set PB19..22 to 1 to turn off leds */ - PIOB_SODR = 0x780000; - - /* turn first led on (PB19) */ - PIOB_CODR = 0x80000; - #elif CPU_ARM_AT91SAM7S256 - /* Set PA0..3 connected to PIOA */ - PIOA_PER = 0x0000001f; - /* Set PA0..3 as output */ - PIOA_OER = 0x0000001f; - - /* Set PA0..3 to 1 to turn off leds */ - PIOA_SODR = 0x0000000f; - /* turn first led on (PA0) */ - PIOA_CODR = 0x00000001; - #endif -} - -#if CPU_ARM_AT91SAM7X256 - #define GET_PIO_STATUS() (~PIOB_ODSR & 0x780000) - #define LAST_LED 0x200000 - #define FIRST_LED 0x100000 - #define SET_PIO_BITS PIOB_SODR - #define CLEAR_PIO_BITS PIOB_CODR - #define AT91SAM7_MSG "BeRTOS is running on AT91SAM7X256..\n" -#elif CPU_ARM_AT91SAM7S256 - #define GET_PIO_STATUS() (~PIOA_ODSR & 0x0000000f) - #define LAST_LED 0x00000004 - #define FIRST_LED 0x00000002 - #define SET_PIO_BITS PIOA_SODR - #define CLEAR_PIO_BITS PIOA_CODR - #define AT91SAM7_MSG "BeRTOS is running on AT91SAM7S256..\n" -#endif - -/* - * Knight Rider leds effect.. - */ -static void leds_toggle(void) -{ - uint32_t led_status = GET_PIO_STATUS(); - - // Turn on led in forward direction - if (direction == FORWARD) - { - if(led_status == LAST_LED) - direction = BACKWARD; - - SET_PIO_BITS = led_status; - CLEAR_PIO_BITS = led_status << 1; - } - // Turn on led in backward direction - else if (direction == BACKWARD) - { - if(led_status == FIRST_LED) - direction = FORWARD; - - SET_PIO_BITS = led_status; - CLEAR_PIO_BITS = led_status >> 1; - } - - /* Wait for interval time */ - timer_setDelay(&leds_timer, ms_to_ticks(100)); - timer_add(&leds_timer); -} - -int main(void) -{ char msg[]="BeRTOS, be fast be beatiful be realtime"; - - - kdbg_init(); - timer_init(); - proc_init(); - leds_init(); - - ASSERT(!IRQ_ENABLED()); - - /* Open the main communication port */ - ser_init(&ser_fd, 0); - ser_setbaudrate(&ser_fd, 115200); - ser_setparity(&ser_fd, SER_PARITY_NONE); - - IRQ_ENABLE; - ASSERT(IRQ_ENABLED()); - - /* - * Register timer and arm timer interupt. - */ - timer_setSoftint(&leds_timer, (Hook)leds_toggle, 0); - timer_setDelay(&leds_timer, ms_to_ticks(100)); - timer_add(&leds_timer); - - /* - * Run process test. - */ - if(!proc_testRun()) - kfile_printf(&ser_fd.fd, "ProcTest..ok!\n"); - else - kfile_printf(&ser_fd.fd, "ProcTest..FAIL!\n"); - /* - * Run signal test. - */ - if(!signal_testRun()) - kfile_printf(&ser_fd.fd, "SignalTest..ok!\n"); - else - kfile_printf(&ser_fd.fd, "SignalTest..FAIL!\n"); - - kputs(AT91SAM7_MSG); - - // Main loop - for(;;) - { - kfile_printf(&ser_fd.fd, "From serial 0: %s\r\n", msg); - } - return 0; -} diff --git a/examples/at91sam7/at91sam7s.mk b/examples/at91sam7/at91sam7s.mk deleted file mode 100644 index 451e4e90..00000000 --- a/examples/at91sam7/at91sam7s.mk +++ /dev/null @@ -1,54 +0,0 @@ -# -# $Id: at91sam7s.mk 18234 2007-10-08 13:39:48Z rasky $ -# Copyright 2006 Develer S.r.l. (http://www.develer.com/) -# All rights reserved. -# -# Makefile fragment for DevLib at91sam7s application. -# -# Author: Bernie Innocenti -# -# - -# Set to 1 for debug builds -at91sam7s_DEBUG = 1 - -# Our target application -TRG += at91sam7s - -at91sam7s_CSRC = \ - examples/at91sam7/at91sam7.c \ - bertos/drv/timer.c \ - bertos/drv/ser.c \ - bertos/cpu/arm/drv/sysirq_at91.c \ - bertos/cpu/arm/drv/ser_at91.c \ - bertos/cpu/arm/drv/timer_at91.c \ - bertos/mware/event.c \ - bertos/mware/formatwr.c \ - bertos/mware/hex.c \ - bertos/mware/sprintf.c \ - bertos/kern/kfile.c \ - bertos/kern/proc.c \ - bertos/kern/proc_test.c \ - bertos/kern/signal_test.c \ - bertos/kern/monitor.c \ - bertos/kern/signal.c \ - # - -at91sam7s_CPPASRC = \ - bertos/cpu/arm/hw/crtat91sam7_rom.S \ - bertos/cpu/arm/hw/switch_ctx_arm.S \ - # - -at91sam7s_PREFIX = arm-none-eabi- - -at91sam7s_CPPAFLAGS = -O0 -g -gdwarf-2 -g -at91sam7s_CPPFLAGS = -O0 -D'ARCH=0' -D__ARM_AT91SAM7S256__ -D'CPU_FREQ=(48023000UL)' -D'WIZ_AUTOGEN' -g3 -gdwarf-2 -fverbose-asm -Iexamples/at91sam7 -Ibertos/cpu/arm -at91sam7s_LDFLAGS = -nostartfiles -T bertos/cpu/arm/scripts/at91sam7_256_rom.ld -Wl,--no-warn-mismatch -at91sam7s_CPU = arm7tdmi - -at91sam7s_PROGRAMMER_CPU = at91sam7 -at91sam7s_PROGRAMMER_TYPE = jtag-tiny -at91sam7s_FLASH_SCRIPT = bertos/prg_scripts/arm/flash.sh -at91sam7s_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh -at91sam7s_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh -at91sam7s_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh diff --git a/examples/at91sam7/at91sam7x.mk b/examples/at91sam7/at91sam7x.mk deleted file mode 100644 index fe48a2ea..00000000 --- a/examples/at91sam7/at91sam7x.mk +++ /dev/null @@ -1,56 +0,0 @@ -# -# $Id: at91sam7x.mk 18234 2007-10-08 13:39:48Z rasky $ -# Copyright 2006 Develer S.r.l. (http://www.develer.com/) -# All rights reserved. -# -# Makefile fragment for DevLib at91sam7x application. -# -# Author: Bernie Innocenti -# -# - -# Set to 1 for debug builds -at91sam7x_DEBUG = 1 - -# Our target application -TRG += at91sam7x - -at91sam7x_CSRC = \ - examples/at91sam7/at91sam7.c \ - bertos/drv/timer.c \ - bertos/drv/ser.c \ - bertos/cpu/arm/drv/sysirq_at91.c \ - bertos/cpu/arm/drv/ser_at91.c \ - bertos/cpu/arm/drv/timer_at91.c \ - bertos/mware/event.c \ - bertos/mware/formatwr.c \ - bertos/mware/hex.c \ - bertos/mware/sprintf.c \ - bertos/struct/heap.c \ - bertos/kern/kfile.c \ - bertos/kern/proc.c \ - bertos/kern/proc_test.c \ - bertos/kern/signal_test.c \ - bertos/kern/monitor.c \ - bertos/kern/signal.c \ - # - -at91sam7x_CPPASRC = \ - bertos/cpu/arm/hw/crtat91sam7_rom.S \ - bertos/cpu/arm/hw/switch_ctx_arm.S \ - # - -at91sam7x_PREFIX = arm-none-eabi- - -at91sam7x_CPPAFLAGS = -O0 -g -gdwarf-2 -g -at91sam7x_CPPFLAGS = -O0 -D'ARCH=0' -D__ARM_AT91SAM7X256__ -D'CPU_FREQ=(48023000UL)' -D'WIZ_AUTOGEN' -g3 -gdwarf-2 -fverbose-asm -Iexamples/at91sam7 -Ibertos/cpu/arm -fno-strict-aliasing -fwrapv -at91sam7x_LDFLAGS = -nostartfiles -T bertos/cpu/arm/scripts/at91sam7_256_rom.ld -Wl,--no-warn-mismatch - -at91sam7x_CPU = arm7tdmi - -at91sam7x_PROGRAMMER_CPU = at91sam7 -at91sam7x_PROGRAMMER_TYPE = jtag-tiny -at91sam7x_FLASH_SCRIPT = bertos/prg_scripts/arm/flash.sh -at91sam7x_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh -at91sam7x_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh -at91sam7x_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh diff --git a/examples/at91sam7/cfg/cfg_monitor.h b/examples/at91sam7/cfg/cfg_monitor.h deleted file mode 100644 index 6391b407..00000000 --- a/examples/at91sam7/cfg/cfg_monitor.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Kernel monitor configuration parameters - * - * \version $Id$ - * \author Bernie Innocenti - */ - -#ifndef CFG_MONITOR_H -#define CFG_MONITOR_H - -/** - * Process monitor. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_MONITOR 1 - -#endif /* CFG_MONITOR_H */ diff --git a/examples/at91sam7/cfg/cfg_proc.h b/examples/at91sam7/cfg/cfg_proc.h deleted file mode 100644 index c59f6715..00000000 --- a/examples/at91sam7/cfg/cfg_proc.h +++ /dev/null @@ -1,108 +0,0 @@ -/** - * \file - * - * - * \brief Kernel configuration parameters - * - * \version $Id$ - * \author Bernie Innocenti - */ - -#ifndef CFG_PROC_H -#define CFG_PROC_H - -/** - * Enable the multithreading kernel. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN 1 - -/** - * Kernel interrupt supervisor. WARNING: Experimental, still incomplete! - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_KERN_IRQ 0 - -/** - * Dynamic memory allocation for processes. - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "heap" - */ -#define CONFIG_KERN_HEAP 0 - -/** - * Size of the dynamic memory pool used by processes. - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_KERN_HEAP_SIZE 16384L - -/** - * Preemptive process scheduling. - * - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "timer" - */ -#define CONFIG_KERN_PREEMPT 1 - -/** - * Priority-based scheduling policy. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_PRI 1 - -/** - * Time sharing quantum (a prime number prevents interference effects) [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_KERN_QUANTUM 11 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KERN_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KERN_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PROC_H */ diff --git a/examples/at91sam7/cfg/cfg_sem.h b/examples/at91sam7/cfg/cfg_sem.h deleted file mode 100644 index 86ed110d..00000000 --- a/examples/at91sam7/cfg/cfg_sem.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Kernel semaphores configuration parameters. - * - * \version $Id$ - * \author Bernie Innocenti - */ - -#ifndef CFG_SEM_H -#define CFG_SEM_H - -/** - * Re-entrant mutual exclusion primitives. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SEMAPHORES 1 - -#endif /* CFG_SEM_H */ diff --git a/examples/at91sam7/cfg/cfg_ser.h b/examples/at91sam7/cfg/cfg_ser.h deleted file mode 100644 index 27b14c3e..00000000 --- a/examples/at91sam7/cfg/cfg_ser.h +++ /dev/null @@ -1,107 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for serial module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_SER_H -#define CFG_SER_H - -/** - * Example of setting for serial port and - * spi port. - * Edit these define for your project. - */ - -/// [bytes] Size of the outbound FIFO buffer for port 0. -#define CONFIG_UART0_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for port 0. -#define CONFIG_UART0_RXBUFSIZE 32 - -/// [bytes] Size of the outbound FIFO buffer for port 1. -#define CONFIG_UART1_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for port 1. -#define CONFIG_UART1_RXBUFSIZE 32 - - -/// [bytes] Size of the outbound FIFO buffer for SPI port (AVR only) -#define CONFIG_SPI_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for SPI port (AVR only) -#define CONFIG_SPI_RXBUFSIZE 32 - -/// [bytes] Size of the outbound FIFO buffer for SPI port 0. -#define CONFIG_SPI0_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for SPI port 0. -#define CONFIG_SPI0_RXBUFSIZE 32 - -/// [bytes] Size of the outbound FIFO buffer for SPI port 1. -#define CONFIG_SPI1_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for SPI port 1. -#define CONFIG_SPI1_RXBUFSIZE 32 - -/// SPI data order (AVR only). -#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST - -/// SPI clock division factor (AVR only). -#define CONFIG_SPI_CLOCK_DIV 16 - -/// SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). -#define CONFIG_SPI_CLOCK_POL 0 - -/// SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). -#define CONFIG_SPI_CLOCK_PHASE 0 - -/// Default transmit timeout (ms). Set to -1 to disable timeout support. -#define CONFIG_SER_TXTIMEOUT -1 - -/// Default receive timeout (ms). Set to -1 to disable timeout support. -#define CONFIG_SER_RXTIMEOUT -1 - -/// Use RTS/CTS handshake -#define CONFIG_SER_HWHANDSHAKE 0 - -/// Default baud rate (set to 0 to disable). -#define CONFIG_SER_DEFBAUDRATE 0 - -/// For serial debug. -#define CONFIG_SER_STROBE 0 - -#endif /* CFG_SER_H */ diff --git a/examples/at91sam7/cfg/cfg_signal.h b/examples/at91sam7/cfg/cfg_signal.h deleted file mode 100644 index ed85119b..00000000 --- a/examples/at91sam7/cfg/cfg_signal.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Kernel signals configuration parameters - * - * \version $Id$ - * \author Bernie Innocenti - */ - -#ifndef CFG_SIGNAL_H -#define CFG_SIGNAL_H - -/** - * Inter-process signals. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SIGNALS 1 - -#endif /* CFG_SIGNAL_H */ diff --git a/examples/at91sam7/cfg/cfg_timer.h b/examples/at91sam7/cfg/cfg_timer.h deleted file mode 100644 index 9d8357ef..00000000 --- a/examples/at91sam7/cfg/cfg_timer.h +++ /dev/null @@ -1,55 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for timer module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_TIMER_H -#define CFG_TIMER_H - -/// Hardware timer selection for drv/timer.c -#define CONFIG_TIMER TIMER_DEFAULT - -/// Debug timer interrupt using a strobe pin. -#define CONFIG_TIMER_STROBE 0 - -/// Enable asynchronous timers -#define CONFIG_TIMER_EVENTS 1 - -/// Support hi-res timer_usleep() -#define CONFIG_TIMER_UDELAY 1 - -#endif /* CFG_TIMER_H */ diff --git a/examples/at91sam7/hw/hw_ser.h b/examples/at91sam7/hw/hw_ser.h deleted file mode 100644 index 7b98f223..00000000 --- a/examples/at91sam7/hw/hw_ser.h +++ /dev/null @@ -1,40 +0,0 @@ -/** - * \file - * - * - * \brief Serial hardware-specific definitions - * - * \version $Id$ - * - * \author Daniele Basile - */ - - diff --git a/examples/at91sam7/verstag.h b/examples/at91sam7/verstag.h deleted file mode 100644 index e6163906..00000000 --- a/examples/at91sam7/verstag.h +++ /dev/null @@ -1,94 +0,0 @@ -/** - * \file - * - * - * \version $Id$ - * - * \author Bernie Innocenti - * - * \brief Declare application version strings - */ -#ifndef DEVLIB_VERSTAG_H -#define DEVLIB_VERSTAG_H - -#ifndef ARCH_CONFIG_H - #include "cfg/arch_config.h" -#endif - -#define APP_NAME "AT91SAM7S-EK porting test" -#define APP_DESCRIPTION "AT91SAM7S-EK porting test" -#define APP_AUTHOR "Develer" -#define APP_COPYRIGHT "Copyright 2007 Develer (http://www.develer.com/)" - -#define VERS_MAJOR 0 -#define VERS_MINOR 1 -#define VERS_REV 0 -#define VERS_LETTER "" - -/** - * If _SNAPSHOT is defined, \c VERS_TAG contains the build date - * date instead of a numeric version string. - */ -//#define _SNAPSHOT - -#ifdef _DEBUG - #define VERS_DBG "D" -#else - #define VERS_DBG "" -#endif - -#define __STRINGIZE(x) #x -#define _STRINGIZE(x) __STRINGIZE(x) - -/** Build application version string (i.e.: "1.7.0") */ -#define MAKE_VERS(maj,min,rev) _STRINGIZE(maj) "." _STRINGIZE(min) "." _STRINGIZE(rev) VERS_LETTER VERS_DBG -#ifdef _SNAPSHOT - #define VERS_TAG "snapshot" " " __DATE__ " " __TIME__ " " VERS_LETTER " " VERS_DBG -#else - #define VERS_TAG MAKE_VERS(VERS_MAJOR,VERS_MINOR,VERS_REV) -#endif - -/** Build application version string suitable for MS windows resource files (i.e.: "1, 7, 0, 1") */ -#define MAKE_RCVERS(maj,min,rev,bld) _STRINGIZE(maj) ", " _STRINGIZE(min) ", " _STRINGIZE(rev) ", " _STRINGIZE(bld) -#define RCVERSION_TAG MAKE_VERS(VERS_MAJOR,VERS_MINOR,VERS_REV) - -/** The revision string (contains VERS_TAG) */ -extern const char vers_tag[]; - -/** Sequential build number (contains VERS_BUILD) */ -extern const int vers_build_nr; -//extern const char vers_build_str[]; - -/** Hostname of the machine used to build this binary (contains VERS_HOST) */ -extern const char vers_host[]; - -#endif /* DEVLIB_VERSTAG_H */ diff --git a/examples/lm3s1968/cfg/cfg_debug.h b/examples/lm3s1968/cfg/cfg_debug.h deleted file mode 100644 index ef7c4a75..00000000 --- a/examples/lm3s1968/cfg/cfg_debug.h +++ /dev/null @@ -1,53 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for Debug module. - * - * \author Daniele Basile - */ - -#ifndef CFG_DEBUG_H -#define CFG_DEBUG_H - -/** - * Debug console port. - * $WIZ$ type = "int"; min = 0 - */ -#define CONFIG_KDEBUG_PORT 0 - -/** - * Baudrate for the debug console. - * $WIZ$ type = "int"; min = 300 - */ -#define CONFIG_KDEBUG_BAUDRATE 115200UL - -#endif /* CFG_DEBUG_H */ diff --git a/examples/lm3s1968/cfg/cfg_gfx.h b/examples/lm3s1968/cfg/cfg_gfx.h deleted file mode 100644 index 8d8b6fa2..00000000 --- a/examples/lm3s1968/cfg/cfg_gfx.h +++ /dev/null @@ -1,74 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for GFX module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_GFX_H -#define CFG_GFX_H - -/// Enable line clipping algorithm. -#define CONFIG_GFX_CLIPPING 1 - -/// Enable text rendering in bitmaps. -#define CONFIG_GFX_TEXT 1 - -/// Enable virtual coordinate system. -#define CONFIG_GFX_VCOORDS 1 - -/// Select bitmap pixel format. -#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB - - -#define CONFIG_CHART_TYPE_X uint8_t ///< Type for the chart dataset -#define CONFIG_CHART_TYPE_Y uint8_t ///< Type for the chart dataset - - -/// Enable button bar behind menus -#define CONFIG_MENU_MENUBAR 0 - -/// Level Edit Timeout -#define CONFIG_LEVELEDIT_TIMEOUT 0 - -/// Menu timeout -#define CONFIG_MENU_TIMEOUT 0 - -/// Enable smooth scrolling in menus -#define CONFIG_MENU_SMOOTH 1 - - -#endif /* CFG_GFX_H */ - diff --git a/examples/lm3s1968/cfg/cfg_heap.h b/examples/lm3s1968/cfg/cfg_heap.h deleted file mode 100644 index 7d080012..00000000 --- a/examples/lm3s1968/cfg/cfg_heap.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for heap module. - * - * \author Daniele Basile - */ - -#ifndef CFG_HEAP_H -#define CFG_HEAP_H - -/** - * Enable malloc/free like API. - * $WIZ$ type = "boolean" - */ -#define CONFIG_HEAP_MALLOC 1 - -#endif /* CFG_HEAP_H */ - - diff --git a/examples/lm3s1968/cfg/cfg_kfile.h b/examples/lm3s1968/cfg/cfg_kfile.h deleted file mode 100644 index 1b1989c9..00000000 --- a/examples/lm3s1968/cfg/cfg_kfile.h +++ /dev/null @@ -1,62 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for KFile interface module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_KFILE_H -#define CFG_KFILE_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KFILE_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KFILE_LOG_FORMAT LOG_FMT_TERSE - -/** - * Enable the gets function with echo. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KFILE_GETS 1 - -#endif /* CFG_KFILE_H */ diff --git a/examples/lm3s1968/cfg/cfg_lcd.h b/examples/lm3s1968/cfg/cfg_lcd.h deleted file mode 100644 index d48fa5df..00000000 --- a/examples/lm3s1968/cfg/cfg_lcd.h +++ /dev/null @@ -1,68 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for lcd display module. - */ - -#ifndef CFG_LCD_H -#define CFG_LCD_H - -/** - * Use 4 bit addressing mode. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_4BIT 0 - -/** - * Use a table to speed up LCD memory addressing. - * This will use about 100 bytes of RAM. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_ADDRESS_FAST 0 - -/** - * LCD setting for 32122A (AVR implementation). - * $WIZ$ type = "boolean" - * $WIZ$ supports = "avr and False" - */ -#define CONFIG_LCD_SOFTINT_REFRESH 0 - -/** - * LCD setting for 32122A (AVR implementation). - * $WIZ$ type = "boolean" - * $WIZ$ supports = "avr and False" - */ -#define CONFIG_LCD_WAIT 0 - - -#endif /* CFG_LCD_H */ - diff --git a/examples/lm3s1968/cfg/cfg_monitor.h b/examples/lm3s1968/cfg/cfg_monitor.h deleted file mode 100644 index d0e24da4..00000000 --- a/examples/lm3s1968/cfg/cfg_monitor.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * \file - * - * - * \brief Kernel monitor configuration parameters - * - * \author Bernie Innocenti - */ - -#ifndef CFG_MONITOR_H -#define CFG_MONITOR_H - -/** - * Process monitor. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_MONITOR 1 - -#endif /* CFG_MONITOR_H */ diff --git a/examples/lm3s1968/cfg/cfg_proc.h b/examples/lm3s1968/cfg/cfg_proc.h deleted file mode 100644 index eb5506b4..00000000 --- a/examples/lm3s1968/cfg/cfg_proc.h +++ /dev/null @@ -1,107 +0,0 @@ -/** - * \file - * - * - * \brief Kernel configuration parameters - * - * \author Bernie Innocenti - */ - -#ifndef CFG_PROC_H -#define CFG_PROC_H - -/** - * Enable the multithreading kernel. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN 1 - -/** - * Kernel interrupt supervisor. WARNING: Experimental, still incomplete! - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_KERN_IRQ 0 - -/** - * Preemptive process scheduling. - * - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "timer" - */ -#define CONFIG_KERN_PREEMPT 1 - -/** - * Time sharing quantum (a prime number prevents interference effects) [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_KERN_QUANTUM 11 - -/** - * Priority-based scheduling policy. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_PRI 1 - -/** - * Dynamic memory allocation for processes. - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "heap" - */ -#define CONFIG_KERN_HEAP 1 - -/** - * Size of the dynamic memory pool used by processes. - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_KERN_HEAP_SIZE 16384L - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KERN_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KERN_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PROC_H */ diff --git a/examples/lm3s1968/cfg/cfg_sem.h b/examples/lm3s1968/cfg/cfg_sem.h deleted file mode 100644 index 51811da4..00000000 --- a/examples/lm3s1968/cfg/cfg_sem.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * \file - * - * - * \brief Kernel semaphores configuration parameters. - * - * \author Bernie Innocenti - */ - -#ifndef CFG_SEM_H -#define CFG_SEM_H - -/** - * Re-entrant mutual exclusion primitives. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SEMAPHORES 0 - -#endif /* CFG_SEM_H */ diff --git a/examples/lm3s1968/cfg/cfg_ser.h b/examples/lm3s1968/cfg/cfg_ser.h deleted file mode 100644 index 91a10e0b..00000000 --- a/examples/lm3s1968/cfg/cfg_ser.h +++ /dev/null @@ -1,222 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for serial module. - * - * \author Daniele Basile - */ - -#ifndef CFG_SER_H -#define CFG_SER_H - -/** - * Example of setting for serial port and - * spi port. - * Edit these define for your project. - */ - -/** - * Size of the outbound FIFO buffer for port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_UART0_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_UART0_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)" - */ -#define CONFIG_UART1_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)" - */ -#define CONFIG_UART1_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 2 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2" - */ -#define CONFIG_UART2_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 2 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2" - */ -#define CONFIG_UART2_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 3 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lpc2" - */ -#define CONFIG_UART3_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 3 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lpc2" - */ -#define CONFIG_UART3_RXBUFSIZE 32 - - -/** - * Size of the outbound FIFO buffer for SPI port [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for SPI port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI0_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI0_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for SPI port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI1_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI1_RXBUFSIZE 32 - -/** - * SPI data order. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_order_bit" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST - -/** - * SPI clock division factor. - * $WIZ$ type = "int" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_DIV 16 - -/** - * SPI clock polarity: normal low or normal high. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_spi_pol" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW - -/** - * SPI clock phase you can choose sample on first edge or - * sample on second clock edge. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_spi_phase" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE - -/** - * Default transmit timeout (ms). Set to -1 to disable timeout support. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_SER_TXTIMEOUT -1 - -/** - * Default receive timeout (ms). Set to -1 to disable timeout support. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_SER_RXTIMEOUT -1 - -/** - * Use RTS/CTS handshake. - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_SER_HWHANDSHAKE 0 - -/** - * Default baudrate for all serial ports (set to 0 to disable). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_SER_DEFBAUDRATE 0UL - -/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean" -#define CONFIG_SER_STROBE 0 - -#endif /* CFG_SER_H */ diff --git a/examples/lm3s1968/cfg/cfg_signal.h b/examples/lm3s1968/cfg/cfg_signal.h deleted file mode 100644 index ce5324ec..00000000 --- a/examples/lm3s1968/cfg/cfg_signal.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * \file - * - * - * \brief Kernel signals configuration parameters - * - * \author Bernie Innocenti - */ - -#ifndef CFG_SIGNAL_H -#define CFG_SIGNAL_H - -/** - * Inter-process signals. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SIGNALS 1 - -#endif /* CFG_SIGNAL_H */ diff --git a/examples/lm3s1968/cfg/cfg_timer.h b/examples/lm3s1968/cfg/cfg_timer.h deleted file mode 100644 index ae1a60b9..00000000 --- a/examples/lm3s1968/cfg/cfg_timer.h +++ /dev/null @@ -1,66 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for timer module. - * - * \author Daniele Basile - */ - -#ifndef CFG_TIMER_H -#define CFG_TIMER_H - -/** - * Hardware timer selection for drv/timer.c. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "timer_select" - */ -#define CONFIG_TIMER TIMER_DEFAULT - -/** - * Debug timer interrupt using a strobe pin. - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_STROBE 0 - -/** - * Enable asynchronous timers. - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_EVENTS 1 - -/** - * Support hi-res timer_usleep(). - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_UDELAY 1 - -#endif /* CFG_TIMER_H */ diff --git a/examples/lm3s1968/hw/hw_kbd.h b/examples/lm3s1968/hw/hw_kbd.h deleted file mode 100644 index 7369a321..00000000 --- a/examples/lm3s1968/hw/hw_kbd.h +++ /dev/null @@ -1,69 +0,0 @@ -/** - * \file - * - * - * \brief LM3S1968 keypad: hardware-specific definitions - * - * \author Andrea Righi - */ - -#ifndef HW_KBD_H -#define HW_KBD_H - -#include /* BV() */ -#include /* GPIO_PORTG_BASE */ -#include /* lm3s_busyWait() */ -#include /* lm3s_gpioPinConfig() / lm3s_gpioPinRead() */ -#include "hw/kbd_map.h" - -#define K_RPT_MASK (K_UP | K_DOWN | K_LEFT | K_RIGHT | K_OK) - -#define KBD_HW_INIT \ - do { \ - SYSCTL_RCGC2_R |= SYSCTL_RCGC2_GPIOG; \ - lm3s_busyWait(512); \ - lm3s_gpioPinConfig(GPIO_PORTG_BASE, \ - K_RPT_MASK, \ - GPIO_DIR_MODE_IN, \ - GPIO_STRENGTH_2MA, \ - GPIO_PIN_TYPE_STD_WPU); \ - } while (0) - -/** - * Read the keyboard ports and return the mask of depressed keys. - */ -INLINE keymask_t kbd_readkeys(void) -{ - return ~lm3s_gpioPinRead(GPIO_PORTG_BASE, - K_UP | K_DOWN | K_LEFT | K_RIGHT | K_OK); -} - -#endif /* HW_KBD_H */ diff --git a/examples/lm3s1968/hw/hw_rit128x96.h b/examples/lm3s1968/hw/hw_rit128x96.h deleted file mode 100644 index 5a8de9fc..00000000 --- a/examples/lm3s1968/hw/hw_rit128x96.h +++ /dev/null @@ -1,122 +0,0 @@ -/** - * \file - * - * - * \brief LM3S1986: OLED-RIT-128x96 (P14201) low-level hardware macros - * - * \author Andrea Righi - */ - -#ifndef HW_RIT128x96_H -#define HW_RIT128x96_H - -#include "cfg/macros.h" /* BV() */ -#include "cfg/debug.h" - -#include -#include -#include - -#include -#include -#include - -/** - * \name LCD I/O pins/ports - * @{ - */ -/* OLED Data/Command control pin */ -#define GPIO_OLEDDC_PIN BV(2) - -/* OLED enable pin */ -#define GPIO_OLEDEN_PIN BV(3) -/*@}*/ - -/** - * \name LCD bus control macros - * @{ - */ -/* Enter command mode */ -#define LCD_SET_COMMAND() \ - lm3s_gpioPinWrite(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN, 0) - -/* Enter data mode */ -#define LCD_SET_DATA() \ - lm3s_gpioPinWrite(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN, GPIO_OLEDDC_PIN) - -/* Send data to the display */ -#define LCD_WRITE(x) \ - { \ - uint32_t _x; \ - while (!lm3s_ssiWriteFrameNonBlocking(SSI0_BASE, x)); \ - /* Dummy read to drain the FIFO */ \ - while (!lm3s_ssiReadFrameNonBlocking(SSI0_BASE, &_x)); \ - } -/*@}*/ - -INLINE void lcd_rit128x96_hw_bus_init(void) -{ - uint32_t dummy; - - /* Enable the peripheral clock */ - SYSCTL_RCGC1_R |= SYSCTL_RCGC1_SSI0; - SYSCTL_RCGC2_R |= SYSCTL_RCGC2_GPIOA; - SYSCTL_RCGC2_R |= SYSCTL_RCGC2_GPIOH; - lm3s_busyWait(512); - - /* Configure the SSI0CLK and SSIOTX pins for SSI operation. */ - lm3s_gpioPinConfig(GPIO_PORTA_BASE, BV(2) | BV(3) | BV(5), - GPIO_DIR_MODE_HW, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD_WPU); - /* - * Configure the GPIO port pin used as a D/C# signal (data/command - * control) for OLED device, and the port pin used to enable power to - * the OLED panel. - */ - lm3s_gpioPinConfig(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN | GPIO_OLEDEN_PIN, - GPIO_DIR_MODE_OUT, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD); - lm3s_gpioPinWrite(GPIO_PORTH_BASE, GPIO_OLEDDC_PIN | GPIO_OLEDEN_PIN, - GPIO_OLEDDC_PIN | GPIO_OLEDEN_PIN); - - /* Configure the SSI0 port for master mode */ - lm3s_ssiOpen(SSI0_BASE, SSI_FRF_MOTO_MODE_2, - SSI_MODE_MASTER, CPU_FREQ / 2, 8); - /* - * Configure the GPIO port pin used as a D/Cn signal for OLED device, - * and the port pin used to enable power to the OLED panel. - */ - lm3s_gpioPinConfig(GPIO_PORTA_BASE, GPIO_OLEDEN_PIN, - GPIO_DIR_MODE_HW, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD_WPU); - - /* Drain the SSI RX FIFO */ - while (lm3s_ssiReadFrameNonBlocking(SSI0_BASE, &dummy)); -} - -#endif /* HW_RIT128x96_H */ diff --git a/examples/lm3s1968/hw/kbd_map.h b/examples/lm3s1968/hw/kbd_map.h deleted file mode 100644 index 20b95ea0..00000000 --- a/examples/lm3s1968/hw/kbd_map.h +++ /dev/null @@ -1,70 +0,0 @@ -/** - * \file - * - * - * \brief Keyboard map definitions. - * - * \version $Id$ - * - * \author Francesco Sacchi - * \author Stefano Fedrigo - */ - -#ifndef HW_KBD_MAP_H -#define HW_KBD_MAP_H - -#include - -/** - * Type for keyboard mask. - */ -typedef uint16_t keymask_t; - -/** - * \name Keycodes. - */ -/*@{*/ -#define K_UP BV(3) -#define K_DOWN BV(4) -#define K_LEFT BV(5) -#define K_RIGHT BV(6) -#define K_OK BV(7) -#define K_CANCEL BV(8) - -#define K_REPEAT BV(13) /**< This is a repeated keyevent. */ -#define K_TIMEOUT BV(14) /**< Fake key event for timeouts. */ -#define K_LONG BV(15) -/*@}*/ - -#define K_LNG_MASK 0 - -#endif /* HW_KBD_MAP_H */ diff --git a/examples/lm3s1968/lm3s1968.c b/examples/lm3s1968/lm3s1968.c deleted file mode 100644 index 8ae3b4a1..00000000 --- a/examples/lm3s1968/lm3s1968.c +++ /dev/null @@ -1,375 +0,0 @@ -/** - * \file - * - * - * \brief LM3S1968 Cortex-M3 testcase - * - * \author Andrea Righi - */ - -#include "hw/hw_rit128x96.h" - -#include "cfg/compiler.h" -#include "cfg/cfg_gfx.h" - -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include - -#include - - - -#define PROC_STACK_SIZE KERN_MINSTACKSIZE * 2 - -#if CONFIG_KERN_HEAP -#define hp_stack NULL -#define lp_stack NULL -#define ser_stack NULL -#define led_stack NULL -#else -static PROC_DEFINE_STACK(hp_stack, PROC_STACK_SIZE); -static PROC_DEFINE_STACK(lp_stack, PROC_STACK_SIZE); -static PROC_DEFINE_STACK(ser_stack, PROC_STACK_SIZE); -static PROC_DEFINE_STACK(led_stack, PROC_STACK_SIZE); -#endif - -extern Font font_gohu; -static uint8_t raster[RAST_SIZE(LCD_WIDTH, LCD_HEIGHT)]; -static Bitmap lcd_bitmap; - -#define KEY_MASK (K_UP | K_DOWN | K_LEFT | K_RIGHT | K_OK) - -static Process *hp_proc, *lp_proc, *led_proc; -static hptime_t start, end; - -static Serial ser_port; - -static void led_init(void) -{ - /* Enable the GPIO port that is used for the on-board LED */ - SYSCTL_RCGC2_R = SYSCTL_RCGC2_GPIOG; - /* - * Perform a dummy read to insert a few cycles delay before enabling - * the peripheral. - */ - (void)SYSCTL_RCGC2_R; - /* Enable the GPIO pin for the LED */ - GPIO_PORTG_DIR_R = 0x04; - GPIO_PORTG_DEN_R = 0x04; -} - -INLINE void led_on(void) -{ - GPIO_PORTG_DATA_R |= 0x04; -} - -INLINE void led_off(void) -{ - GPIO_PORTG_DATA_R &= ~0x04; -} - -static bool led_blinking; - -static void NORETURN led_process(void) -{ - int i; - - for (i = 0; ; i++) - { - if (!led_blinking) - { - led_off(); - sig_wait(SIG_USER0); - } - if (i & 1) - led_on(); - else - led_off(); - timer_delay(50); - } -} - -static void led_test(UNUSED_ARG(Bitmap *, bm)) -{ - led_blinking = !led_blinking; - sig_send(led_proc, SIG_USER0); -} - -static void bouncing_logo(Bitmap *bm) -{ - const long SPEED_SCALE = 1000; - const long GRAVITY_ACCEL = 100; - const long BOUNCE_ELASTICITY = 1; - long h = (long)(-bertos_logo.height) * SPEED_SCALE; - long speed = 0, i; - - for (i = 0; ; i++) - { - /* Move */ - h += speed; - - /* Gravity acceleration */ - speed += GRAVITY_ACCEL; - - if (h > 0 && speed > 0) - { - /* Bounce */ - speed = -(speed / BOUNCE_ELASTICITY); - - } - /* Update graphics */ - gfx_bitmapClear(bm); - gfx_blitImage(bm, - (LCD_WIDTH - bertos_logo.width) / 2, - (LCD_HEIGHT - bertos_logo.height) / 2 + h / SPEED_SCALE, - &bertos_logo); - text_xprintf(bm, 7, 0, TEXT_FILL | TEXT_CENTER, "Press SELECT to quit"); - rit128x96_blitBitmap(bm); - timer_delay(5); - if (kbd_peek() & KEY_MASK) - break; - } -} - -static void screen_saver(Bitmap *bm) -{ - int x1, y1, x2, y2; - int i; - - for (i = 0; ; i++) - { - x1 = i % LCD_WIDTH; - y1 = i % LCD_HEIGHT; - - x2 = LCD_WIDTH - i % LCD_WIDTH; - y2 = LCD_HEIGHT - i % LCD_HEIGHT; - - gfx_bitmapClear(bm); - gfx_rectDraw(bm, x1, y1, x2, y2); - rit128x96_blitBitmap(bm); - if (kbd_peek() & KEY_MASK) - break; - } -} - -INLINE hptime_t get_hp_ticks(void) -{ - return (TIMER_HW_CNT - timer_hw_hpread()) + - timer_clock_unlocked() * TIMER_HW_CNT; -} - -static void NORETURN hp_process(void) -{ - while (1) - { - sig_wait(SIG_USER0); - end = get_hp_ticks(); - timer_delay(100); - sig_send(lp_proc, SIG_USER0); - } -} - -static void NORETURN lp_process(void) -{ - while (1) - { - start = get_hp_ticks(); - sig_send(hp_proc, SIG_USER0); - sig_wait(SIG_USER0); - } -} - -static void res_process(void) -{ - const char spinner[] = {'/', '-', '\\', '|'}; - int i; - char c; - - for (i = 0; ; i++) - { - /* Show context switch (in clock cycles) */ - c = spinner[i % countof(spinner)]; - text_xprintf(&lcd_bitmap, 3, 0, TEXT_CENTER | TEXT_FILL, "%c Context switch %c", c, c); - text_xprintf(&lcd_bitmap, 5, 0, TEXT_FILL, " %lu clock cycles", end - start); - /* Show context switch (in usec) */ - text_xprintf(&lcd_bitmap, 6, 0, TEXT_FILL, - " %lu.%lu usec", - ((end - start) * 1000000) / CPU_FREQ, - ((end - start) * (100000000 / CPU_FREQ)) % 100); - rit128x96_blitBitmap(&lcd_bitmap); - timer_delay(5); - if (kbd_peek() & KEY_MASK) - break; - } -} - -static void context_switch_test(Bitmap *bm) -{ - gfx_bitmapClear(bm); - text_xprintf(bm, 0, 0, TEXT_FILL, - "CPU: Cortex-M3 %luMHz", CPU_FREQ / 1000000); - rit128x96_blitBitmap(bm); - text_xprintf(bm, 1, 0, TEXT_FILL, "Board: LM3S1968 EVB"); - rit128x96_blitBitmap(bm); - - res_process(); -} - -static void uptime(Bitmap *bm) -{ - extern const Font font_luBS14; - const Font *old_font; - - old_font = bm->font; - - /* Set big font */ - gfx_bitmapClear(bm); - gfx_setFont(bm, &font_luBS14); - text_xprintf(bm, 0, 0, TEXT_FILL | TEXT_CENTER, "Uptime"); - while (1) - { - ticks_t clock = ticks_to_ms(timer_clock_unlocked()); - - /* Display uptime (in ticks) */ - text_xprintf(&lcd_bitmap, 2, 0, TEXT_FILL | TEXT_CENTER, - "%lu", clock / 1000); - rit128x96_blitBitmap(bm); - timer_delay(5); - if (kbd_peek() & KEY_MASK) - break; - } - gfx_setFont(bm, old_font); -} - -static void NORETURN soft_reset(Bitmap * bm) -{ - extern const Font font_luBS14; - int i; - - /* Set big font */ - gfx_bitmapClear(bm); - gfx_setFont(bm, &font_luBS14); - for (i = 5; i; --i) - { - text_xprintf(bm, 2, 0, TEXT_FILL | TEXT_CENTER, "%d", i); - rit128x96_blitBitmap(bm); - timer_delay(1000); - } - text_xprintf(bm, 2, 0, TEXT_FILL | TEXT_CENTER, "REBOOT"); - rit128x96_blitBitmap(bm); - timer_delay(1000); - - /* Perform a software reset request */ - HWREG(NVIC_APINT) = NVIC_APINT_VECTKEY | NVIC_APINT_SYSRESETREQ; - UNREACHABLE(); -} - -static void NORETURN ser_process(void) -{ - char buf[32]; - int i; - - ser_init(&ser_port, SER_UART0); - ser_setbaudrate(&ser_port, 115200); - - /* BeRTOS terminal */ - for (i = 0; ; i++) - { - kfile_printf(&ser_port.fd, "\n\r[%03d] BeRTOS:~$ ", i); - kfile_gets_echo(&ser_port.fd, buf, sizeof(buf), true); - kfile_printf(&ser_port.fd, "%s", buf); - } -} - -static struct MenuItem main_items[] = -{ - { (const_iptr_t)"LED blinking", 0, (MenuHook)led_test, (iptr_t)&lcd_bitmap }, - { (const_iptr_t)"Bouncing logo", 0, (MenuHook)bouncing_logo, (iptr_t)&lcd_bitmap }, - { (const_iptr_t)"Screen saver demo", 0, (MenuHook)screen_saver, (iptr_t)&lcd_bitmap }, - { (const_iptr_t)"Scheduling test", 0, (MenuHook)context_switch_test, (iptr_t)&lcd_bitmap }, - { (const_iptr_t)"Show uptime", 0, (MenuHook)uptime, (iptr_t)&lcd_bitmap }, - { (const_iptr_t)"Reboot", 0, (MenuHook)soft_reset, (iptr_t)&lcd_bitmap }, - { (const_iptr_t)0, 0, NULL, (iptr_t)0, } -}; - -static struct Menu main_menu = { main_items, "BeRTOS", MF_STICKY | MF_SAVESEL, &lcd_bitmap, 0, rit128x96_blitBitmap }; - -int main(void) -{ - IRQ_ENABLE; - kdbg_init(); - - kputs("Init LED.."); - led_init(); - kputs("Done.\n"); - kputs("Init Timer.."); - timer_init(); - kputs("Done.\n"); - kputs("Init Process.."); - proc_init(); - kputs("Done.\n"); - kputs("Init OLED display.."); - rit128x96_init(); - gfx_bitmapInit(&lcd_bitmap, raster, LCD_WIDTH, LCD_HEIGHT); - gfx_setFont(&lcd_bitmap, &font_gohu); - rit128x96_blitBitmap(&lcd_bitmap); - kputs("Done.\n"); - kputs("Init Keypad.."); - kbd_init(); - kputs("Done.\n"); - - hp_proc = proc_new(hp_process, NULL, PROC_STACK_SIZE, hp_stack); - lp_proc = proc_new(lp_process, NULL, PROC_STACK_SIZE, lp_stack); - led_proc = proc_new(led_process, NULL, PROC_STACK_SIZE, led_stack); - /* Open a dummy echo terminal on UART0 */ - proc_new(ser_process, NULL, PROC_STACK_SIZE, ser_stack); - - proc_setPri(hp_proc, 2); - proc_setPri(lp_proc, 1); - - while (1) - { - menu_handle(&main_menu); - cpu_relax(); - } -} diff --git a/examples/lm3s1968/lm3s1968.mk b/examples/lm3s1968/lm3s1968.mk deleted file mode 100644 index d93a6c1b..00000000 --- a/examples/lm3s1968/lm3s1968.mk +++ /dev/null @@ -1,84 +0,0 @@ -# -# $Id: lm3s1968.mk 18234 2007-10-08 13:39:48Z rasky $ -# Copyright 2006 Develer S.r.l. (http://www.develer.com/) -# All rights reserved. -# -# Makefile fragment for DevLib lm3s1968 application. -# -# Author: Manuele Fanelli -# -# - -# Set to 1 for debug builds -lm3s1968_DEBUG = 0 - -include bertos/fonts/fonts.mk - -# Our target application -TRG += lm3s1968 - -lm3s1968_CSRC = \ - examples/lm3s1968/lm3s1968.c \ - bertos/gfx/bitmap.c \ - bertos/gfx/line.c \ - bertos/gfx/win.c \ - bertos/gfx/text.c \ - bertos/gfx/text_format.c \ - bertos/gui/menu.c \ - bertos/fonts/gohu.c \ - bertos/fonts/luBS14.c \ - bertos/icons/logo.c \ - bertos/mware/formatwr.c \ - bertos/mware/hex.c \ - bertos/mware/sprintf.c \ - bertos/mware/event.c \ - bertos/struct/heap.c \ - bertos/drv/timer.c \ - bertos/drv/ser.c \ - bertos/drv/kbd.c \ - bertos/drv/lcd_rit128x96.c \ - bertos/kern/kfile.c \ - bertos/kern/monitor.c \ - bertos/kern/proc_test.c \ - bertos/kern/proc.c \ - bertos/kern/signal.c \ - bertos/cpu/cortex-m3/drv/gpio_lm3s.c \ - bertos/cpu/cortex-m3/drv/clock_lm3s.c \ - bertos/cpu/cortex-m3/drv/ser_lm3s.c \ - bertos/cpu/cortex-m3/drv/kdebug_lm3s.c \ - bertos/cpu/cortex-m3/drv/ssi_lm3s.c \ - bertos/cpu/cortex-m3/drv/timer_cm3.c \ - bertos/cpu/cortex-m3/drv/irq_cm3.c \ - bertos/cpu/cortex-m3/hw/switch_ctx_cm3.c \ - bertos/cpu/cortex-m3/hw/init_cm3.c - -lm3s1968_CPPASRC = \ - bertos/cpu/cortex-m3/hw/vectors_cm3.S \ - bertos/cpu/cortex-m3/hw/crt_cm3.S \ - # - -# This is an hosted application -lm3s1968_PREFIX = arm-none-eabi- - -lm3s1968_CPPAFLAGS = -mthumb -mno-thumb-interwork -lm3s1968_CPPFLAGS = -D'ARCH=0' -D__ARM_LM3S1968__ -D'CPU_FREQ=(50000000L)' -D'WIZ_AUTOGEN' -mthumb -mno-thumb-interwork -Iexamples/lm3s1968 -Ibertos/cpu/cortex-m3 -fno-strict-aliasing -fwrapv -lm3s1968_LDFLAGS = -nostartfiles -T bertos/cpu/cortex-m3/scripts/lm3s1968_rom.ld -Wl,--no-warn-mismatch -mthumb -mno-thumb-interwork - -lm3s1968_CPU = cortex-m3 - -lm3s1968_PROGRAMMER_CPU = lm3s -lm3s1968_PROGRAMMER_TYPE = luminary -lm3s1968_FLASH_SCRIPT = bertos/prg_scripts/arm/flash-lm3s.sh -lm3s1968_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh -lm3s1968_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh -lm3s1968_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh - -ifeq ($(lm3s1968_DEBUG),0) - # Production options - lm3s1968_CFLAGS += -O2 -fomit-frame-pointer - lm3s1968_CXXFLAGS += -O2 -fomit-frame-pointer -else - # Debug options - lm3s1968_CPPAFLAGS += -g -gdwarf-2 - lm3s1968_CPPFLAGS += -O0 -g3 -gdwarf-2 -fverbose-asm -endif diff --git a/examples/lpc2378/cfg/cfg_adc.h b/examples/lpc2378/cfg/cfg_adc.h deleted file mode 100644 index 4df8c62f..00000000 --- a/examples/lpc2378/cfg/cfg_adc.h +++ /dev/null @@ -1,110 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the ADC module. - * - * \version $Id: cfg_adc.h 2582 2009-04-20 12:33:48Z batt $ - * \author Daniele Basile - */ - -#ifndef CFG_ADC_H -#define CFG_ADC_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define ADC_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define ADC_LOG_FORMAT LOG_FMT_VERBOSE - -/** - * Clock Frequency for ADC conversion. - * - * $WIZ$ type = "int" - * $WIZ$ supports = "at91" - */ -#define CONFIG_ADC_CLOCK 4800000UL - -/** - * Minimum time for starting up a conversion [us]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 0 - * $WIZ$ supports = "at91" - */ -#define CONFIG_ADC_STARTUP_TIME 20 - -/** - * Minimum time for sample and hold [us]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 0 - * $WIZ$ supports = "at91" - */ -#define CONFIG_ADC_SHTIME 834 - -/** - * ADC Voltage Reference. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "avr_adc_refs" - * $WIZ$ supports = "avr" - */ -#define CONFIG_ADC_AVR_REF ADC_AVR_AVCC - -/** - * ADC clock divisor from main crystal. - * - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ max = 128 - * $WIZ$ supports = "avr" - */ -#define CONFIG_ADC_AVR_DIVISOR 2 - -/** - * Enable ADC strobe for debugging ADC ISR. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_ADC_STROBE 0 - -#endif /* CFG_ADC_H */ diff --git a/examples/lpc2378/cfg/cfg_afsk.h b/examples/lpc2378/cfg/cfg_afsk.h deleted file mode 100644 index 1b4b147e..00000000 --- a/examples/lpc2378/cfg/cfg_afsk.h +++ /dev/null @@ -1,114 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for AFSK1200 modem. - * - * \version $Id: cfg_afsk.h 3065 2009-10-10 11:20:09Z batt $ - * \author Francesco Sacchi - */ - -#ifndef CFG_AFSK_H -#define CFG_AFSK_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define AFSK_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define AFSK_LOG_FORMAT LOG_FMT_TERSE - - -/** - * AFSK discriminator filter type. - * - * $WIZ$ type = "enum"; value_list = "afsk_filter_list" - */ -#define CONFIG_AFSK_FILTER AFSK_CHEBYSHEV - - -/** - * AFSK receiver buffer length. - * - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_AFSK_RX_BUFLEN 32 - -/** - * AFSK transimtter buffer length. - * - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_AFSK_TX_BUFLEN 32 - -/** - * AFSK DAC sample rate for modem outout. - * $WIZ$ type = "int" - * $WIZ$ min = 2400 - */ -#define CONFIG_AFSK_DAC_SAMPLERATE 9600 - -/** - * AFSK RX timeout in ms, set to -1 to disable. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_AFSK_RXTIMEOUT 0 - - -/** - * AFSK Preamble length in [ms], before starting transmissions. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_AFSK_PREAMBLE_LEN 300UL - - - -/** - * AFSK Trailer length in [ms], before stopping transmissions. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_AFSK_TRAILER_LEN 50UL - -#endif /* CFG_AFSK_H */ diff --git a/examples/lpc2378/cfg/cfg_ax25.h b/examples/lpc2378/cfg/cfg_ax25.h deleted file mode 100644 index 64f862f1..00000000 --- a/examples/lpc2378/cfg/cfg_ax25.h +++ /dev/null @@ -1,76 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the AX25 protocol module. - * - * \version $Id$ - * \author Francesco Sacchi - */ - -#ifndef CFG_AX25_H -#define CFG_AX25_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define AX25_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define AX25_LOG_FORMAT LOG_FMT_TERSE - -/** - * AX25 frame buffer lenght. - * - * $WIZ$ type = "int" - * $WIZ$ min = 18 - */ -#define CONFIG_AX25_FRAME_BUF_LEN 330 - - -/** - * Enable repeaters listing in AX25 frames. - * If enabled use 56 addtional bytes of RAM - * for each message received. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_AX25_RPT_LST 1 - -#endif /* CFG_AX25_H */ diff --git a/examples/lpc2378/cfg/cfg_battfs.h b/examples/lpc2378/cfg/cfg_battfs.h deleted file mode 100644 index 4849a7cb..00000000 --- a/examples/lpc2378/cfg/cfg_battfs.h +++ /dev/null @@ -1,68 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for BattFS module. - * - * \version $Id: cfg_battfs.h 2665 2009-04-24 16:39:09Z batt $ - * \author Daniele Basile - */ - -#ifndef CFG_BATTFS_H -#define CFG_BATTFS_H - - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define BATTFS_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define BATTFS_LOG_FORMAT LOG_FMT_VERBOSE - -/** - * Set to 1 to enable free page shuffling. - * This increase memories life but makes debugging - * more difficult due to its unrepeteable state. - * $WIZ$ type = "boolean" - */ -#define CONFIG_BATTFS_SHUFFLE_FREE_PAGES 0 - - -#endif /* BATTFS */ diff --git a/examples/lpc2378/cfg/cfg_dataflash.h b/examples/lpc2378/cfg/cfg_dataflash.h deleted file mode 100644 index 1115006a..00000000 --- a/examples/lpc2378/cfg/cfg_dataflash.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for data flash memory module. - * - * \version $Id: cfg_dataflash.h 2348 2009-02-16 13:43:44Z duplo $ - * \author Daniele Basile - */ - -#ifndef CFG_DATAFLASH_H -#define CFG_DATAFLASH_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define DATAFLASH_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define DATAFLASH_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_DATAFLASH_H */ diff --git a/examples/lpc2378/cfg/cfg_dc_motor.h b/examples/lpc2378/cfg/cfg_dc_motor.h deleted file mode 100644 index 2b21bf6a..00000000 --- a/examples/lpc2378/cfg/cfg_dc_motor.h +++ /dev/null @@ -1,67 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for DC motor module. - * - * \version $Id: cfg_dc_motor.h 2777 2009-08-20 14:54:17Z $ - * - * \author Daniele Basile - */ - -#ifndef CFG_DC_MOTOR_H -#define CFG_DC_MOTOR_H - -/** - * Number of the DC motors to manage. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NUM_DC_MOTOR 4 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define DC_MOTOR_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define DC_MOTOR_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_DC_MOTOR_H */ diff --git a/examples/lpc2378/cfg/cfg_debug.h b/examples/lpc2378/cfg/cfg_debug.h deleted file mode 100644 index 3283420c..00000000 --- a/examples/lpc2378/cfg/cfg_debug.h +++ /dev/null @@ -1,55 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for Debug module. - * - * \version $Id: cfg_debug.h 2582 2009-04-20 12:33:48Z batt $ - * - * \author Daniele Basile - */ - -#ifndef CFG_DEBUG_H -#define CFG_DEBUG_H - -/** - * Debug console port. - * $WIZ$ type = "int"; min = 0 - */ -#define CONFIG_KDEBUG_PORT 0 - -/** - * Baudrate for the debug console. - * $WIZ$ type = "int"; min = 300 - */ -#define CONFIG_KDEBUG_BAUDRATE 115200UL - -#endif /* CFG_DEBUG_H */ diff --git a/examples/lpc2378/cfg/cfg_fat.h b/examples/lpc2378/cfg/cfg_fat.h deleted file mode 100644 index 376f9ad2..00000000 --- a/examples/lpc2378/cfg/cfg_fat.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for Fat module. - * - * \version $Id: cfg_fat.h 2694 2009-05-21 11:07:20Z batt $ - * - * \author Luca Ottaviano - * \author Francesco Sacchi - */ - -#ifndef CFG_FAT_H -#define CFG_FAT_H - -/** - * Use word alignment to access FAT structure. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_WORD_ACCESS 0 -#define _WORD_ACCESS CONFIG_FAT_WORD_ACCESS - -/** - * Enable read functions only. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_FS_READONLY 0 -#define _FS_READONLY CONFIG_FAT_FS_READONLY - -/** - * Minimization level to remove some functions. - * $WIZ$ type = "int"; min = 0; max = 3 - */ -#define CONFIG_FAT_FS_MINIMIZE 0 -#define _FS_MINIMIZE CONFIG_FAT_FS_MINIMIZE - -/** - * If enabled, this reduces memory consumption 512 bytes each file object by using a shared buffer. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_FS_TINY 1 -#define _FS_TINY CONFIG_FAT_FS_TINY - -/** - * To enable string functions, set _USE_STRFUNC to 1 or 2. - * $WIZ$ type = "int" - * $WIZ$ supports = "False" - */ -#define CONFIG_FAT_USE_STRFUNC 0 -#define _USE_STRFUNC CONFIG_FAT_USE_STRFUNC - -/** - * Enable f_mkfs function. Requires CONFIG_FAT_FS_READONLY = 0. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_USE_MKFS 0 -#define _USE_MKFS (CONFIG_FAT_USE_MKFS && !CONFIG_FAT_FS_READONLY) - -/** - * Enable f_forward function. Requires CONFIG_FAT_FS_TINY. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_USE_FORWARD 0 -#define _USE_FORWARD (CONFIG_FAT_USE_FORWARD && CONFIG_FAT_FS_TINY) - -/** - * Number of volumes (logical drives) to be used. - * $WIZ$ type = "int"; min = 1; max = 255 - */ -#define CONFIG_FAT_DRIVES 1 -#define _DRIVES CONFIG_FAT_DRIVES - -/** - * Maximum sector size to be handled. (512/1024/2048/4096). - * 512 for memory card and hard disk, 1024 for floppy disk, 2048 for MO disk - * $WIZ$ type = "int"; min = 512; max = 4096 - */ -#define CONFIG_FAT_MAX_SS 512 -#define _MAX_SS CONFIG_FAT_MAX_SS - -/** - * When _MULTI_PARTITION is set to 0, each volume is bound to the same physical - * drive number and can mount only first primaly partition. When it is set to 1, - * each volume is tied to the partitions listed in Drives[]. - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_FAT_MULTI_PARTITION 0 -#define _MULTI_PARTITION CONFIG_FAT_MULTI_PARTITION - -/** - * Specifies the OEM code page to be used on the target system. - * $WIZ$ type = "int" - */ -#define CONFIG_FAT_CODE_PAGE 850 -#define _CODE_PAGE CONFIG_FAT_CODE_PAGE - -/** - * Support for long filenames. Enable only if you have a valid Microsoft license. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_USE_LFN 0 -#define _USE_LFN CONFIG_FAT_USE_LFN - -/** - * Maximum Long File Name length to handle. - * $WIZ$ type = "int"; min = 8; max = 255 - */ -#define CONFIG_FAT_MAX_LFN 255 -#define _MAX_LFN CONFIG_FAT_MAX_LFN - -#endif /* CFG_FAT_H */ diff --git a/examples/lpc2378/cfg/cfg_flash25.h b/examples/lpc2378/cfg/cfg_flash25.h deleted file mode 100644 index 05ec8e45..00000000 --- a/examples/lpc2378/cfg/cfg_flash25.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for flash25 module. - * - * \version $Id: cfg_flash25.h 2362 2009-02-19 14:35:07Z duplo $ - * - * \author Daniele Basile - */ - -#ifndef CFG_FLASH25_H -#define CFG_FLASH25_H - -/** - * Eeprom memory type. - * - *$WIZ$ type = "enum" - *$WIZ$ value_list = "flash25_list" - */ -#define CONFIG_FLASH25 FLASH25_AT25F2048 - -#endif /* CFG_FALSH25_H */ - diff --git a/examples/lpc2378/cfg/cfg_formatwr.h b/examples/lpc2378/cfg/cfg_formatwr.h deleted file mode 100644 index 296e953b..00000000 --- a/examples/lpc2378/cfg/cfg_formatwr.h +++ /dev/null @@ -1,67 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for formatted write module. - * - * \version $Id: cfg_formatwr.h 2965 2009-09-18 09:35:40Z lottaviano $ - * - * \author Daniele Basile - */ - -#ifndef CFG_FORMATWR_H -#define CFG_FORMATWR_H - -/** - * printf()-style formatter configuration. - * $WIZ$ type = "enum"; value_list = "printf_list" - * - * \sa PRINTF_DISABLED - * \sa PRINTF_NOMODIFIERS - * \sa PRINTF_REDUCED - * \sa PRINTF_NOFLOAT - * \sa PRINTF_FULL - */ -#define CONFIG_PRINTF PRINTF_FULL - -/** - * Size of buffer to format "%" sequences in printf. - * - * Warning: no check on buffer size is done when formatting, be careful especially - * with big numbers and %f formatting. - * - * $WIZ$ type = "int" - * $WIZ$ min = 4 - */ -#define CONFIG_FRMWRI_BUFSIZE 134 - -#endif /* CFG_FORMATWR_H */ - diff --git a/examples/lpc2378/cfg/cfg_heap.h b/examples/lpc2378/cfg/cfg_heap.h deleted file mode 100644 index 5af8e5c4..00000000 --- a/examples/lpc2378/cfg/cfg_heap.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for heap module. - * - * \version $Id: cfg_heap.h 3256 2010-03-22 16:29:37Z batt $ - * - * \author Daniele Basile - */ - -#ifndef CFG_HEAP_H -#define CFG_HEAP_H - -/** - * Enable malloc/free like API. - * $WIZ$ type = "boolean" - */ -#define CONFIG_HEAP_MALLOC 1 - -#endif /* CFG_HEAP_H */ - - diff --git a/examples/lpc2378/cfg/cfg_i2c.h b/examples/lpc2378/cfg/cfg_i2c.h deleted file mode 100644 index a796c395..00000000 --- a/examples/lpc2378/cfg/cfg_i2c.h +++ /dev/null @@ -1,90 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for I2C module. - * - * \version $Id: cfg_i2c.h 2561 2009-04-20 09:26:48Z duplo $ - * - * \author Daniele Basile - */ - -#ifndef CFG_I2C_H -#define CFG_I2C_H - -/** -*Comunication frequency. -* -* $WIZ$ type = "int" -*/ -#define CONFIG_I2C_FREQ 100000UL - -/** - * I2C start timeout. - * For how many milliseconds the i2c_start - * should try to get an ACK before - * returning error. - * - * $WIZ$ type = "int" - */ -#define CONFIG_I2C_START_TIMEOUT 100 - -/** - * I2C backend the driver should use. - * - * I2C_BACKEND_BUILTIN: Use (if present) the builtin i2c hardware. - * I2C_BACKEND_BITBANG: Use the emulated bitbang driver. - * \see drv/i2c.h for more information. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "i2c_backend" - */ -#define CONFIG_I2C_BACKEND I2C_BACKEND_BUILTIN - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define I2C_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define I2C_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_I2C_H */ - - diff --git a/examples/lpc2378/cfg/cfg_i2s.h b/examples/lpc2378/cfg/cfg_i2s.h deleted file mode 100644 index 9faf3dd8..00000000 --- a/examples/lpc2378/cfg/cfg_i2s.h +++ /dev/null @@ -1,75 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for I2S module. - * - * \version $Id: cfg_i2s.h 2743 2009-07-06 15:17:09Z lottaviano $ - * - * \author Luca Ottaviano - */ - -#ifndef CFG_I2S_H -#define CFG_I2S_H - -/** - * Length of each play buffer. - * - * $WIZ$ type = "int" - */ -#define CONFIG_PLAY_BUF_LEN 8192 - -/** - * Sampling frequency of the audio file. - * - * $WIZ$ type = "int" - * $WIZ$ min = 32000 - * $WIZ$ max = 192000 - */ -#define CONFIG_SAMPLE_FREQ 44100UL - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define I2S_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define I2S_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_I2S_H */ diff --git a/examples/lpc2378/cfg/cfg_ini_reader.h b/examples/lpc2378/cfg/cfg_ini_reader.h deleted file mode 100644 index 096c486d..00000000 --- a/examples/lpc2378/cfg/cfg_ini_reader.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for ini reader module. - * - * \version $Id: cfg_ini_reader.h 2710 2009-06-08 13:54:43Z batt $ - * - * \author Luca Ottaviano - */ - -#ifndef CFG_INI_READER_H -#define CFG_INI_READER_H - -/** - * Maximum ini file line length (chars). - * $WIZ$ type = "int"; min = 1 - */ -#define CONFIG_INI_MAX_LINE_LEN 64 - -#endif /* CFG_INI_READER_H */ diff --git a/examples/lpc2378/cfg/cfg_kbd.h b/examples/lpc2378/cfg/cfg_kbd.h deleted file mode 100644 index 97403c1f..00000000 --- a/examples/lpc2378/cfg/cfg_kbd.h +++ /dev/null @@ -1,59 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for keyboard module. - * - * \version $Id: cfg_kbd.h 2936 2009-09-14 16:19:13Z asterix $ - * - * \author Daniele Basile - */ - -#ifndef CFG_KBD_H -#define CFG_KBD_H - -/// Keyboard polling method. $WIZ$ supports = "False" -#define CONFIG_KBD_POLL KBD_POLL_SOFTINT - -/// Enable keyboard event delivery to observers. $WIZ$ type = "boolean" -#define CONFIG_KBD_OBSERVER 0 - -/// Enable key beeps. $WIZ$ type = "boolean" -#define CONFIG_KBD_BEEP 0 - -/// Enable long pression handler for keys. $WIZ$ type = "boolean" -#define CONFIG_KBD_LONGPRESS 0 - -/// Enable calling poor man's scheduler to be called inside kbd_peek. $WIZ$ type = "boolean" -#define CONFIG_KBD_SCHED 0 - -#endif /* CFG_KBD_H */ - diff --git a/examples/lpc2378/cfg/cfg_kfile.h b/examples/lpc2378/cfg/cfg_kfile.h deleted file mode 100644 index f795af08..00000000 --- a/examples/lpc2378/cfg/cfg_kfile.h +++ /dev/null @@ -1,62 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for KFile interface module. - * - * \version $Id: cfg_kfile.h 2348 2009-02-16 13:43:44Z duplo $ - * \author Daniele Basile - */ - -#ifndef CFG_KFILE_H -#define CFG_KFILE_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KFILE_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KFILE_LOG_FORMAT LOG_FMT_TERSE - -/** - * Enable the gets function with echo. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KFILE_GETS 1 - -#endif /* CFG_KFILE_H */ diff --git a/examples/lpc2378/cfg/cfg_lcd.h b/examples/lpc2378/cfg/cfg_lcd.h deleted file mode 100644 index 8bd9884c..00000000 --- a/examples/lpc2378/cfg/cfg_lcd.h +++ /dev/null @@ -1,72 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for lcd display module. - * - * \version $Id: cfg_lcd.h 2563 2009-04-20 09:47:08Z batt $ - * - * \author Daniele Basile - */ - -#ifndef CFG_LCD_H -#define CFG_LCD_H - -/** - * Use 4 bit addressing mode. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_4BIT 0 - -/** - * Use a table to speed up LCD memory addressing. - * This will use about 100 bytes of RAM. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_ADDRESS_FAST 1 - -/** - * LCD setting for 32122A (AVR implementation). - * $WIZ$ type = "boolean" - * $WIZ$ supports = "avr and False" - */ -#define CONFIG_LCD_SOFTINT_REFRESH 0 - -/** - * LCD setting for 32122A (AVR implementation). - * $WIZ$ type = "boolean" - * $WIZ$ supports = "avr and False" - */ -#define CONFIG_LCD_WAIT 1 - - -#endif /* CFG_LCD_H */ - diff --git a/examples/lpc2378/cfg/cfg_lm75.h b/examples/lpc2378/cfg/cfg_lm75.h deleted file mode 100644 index 91b347ad..00000000 --- a/examples/lpc2378/cfg/cfg_lm75.h +++ /dev/null @@ -1,57 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the LM75 sensor temperature. - * - * \author Daniele Basile - */ - -#ifndef CFG_LM75_H -#define CFG_LM75_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define LM75_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define LM75_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_AX25_H */ diff --git a/examples/lpc2378/cfg/cfg_md2.h b/examples/lpc2378/cfg/cfg_md2.h deleted file mode 100644 index 65e4f4e3..00000000 --- a/examples/lpc2378/cfg/cfg_md2.h +++ /dev/null @@ -1,54 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for MD2 module. - * - * \version $Id: cfg_md2.h 2582 2009-04-20 12:33:48Z batt $ - * - * \author Daniele Basile - */ - -#ifndef CFG_MD2_H -#define CFG_MD2_H - -/** - * Size of block for MD2 algorithm. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_MD2_BLOCK_LEN 16 - -/// Use standard permutation in MD2 algorithm. $WIZ$ type = "boolean" -#define CONFIG_MD2_STD_PERM 0 - -#endif /* CFG_MD2_H */ - diff --git a/examples/lpc2378/cfg/cfg_monitor.h b/examples/lpc2378/cfg/cfg_monitor.h deleted file mode 100644 index dcd07e1c..00000000 --- a/examples/lpc2378/cfg/cfg_monitor.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Kernel monitor configuration parameters - * - * \version $Id: cfg_monitor.h 2418 2009-03-25 15:57:34Z batt $ - * \author Bernie Innocenti - */ - -#ifndef CFG_MONITOR_H -#define CFG_MONITOR_H - -/** - * Process monitor. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_MONITOR 1 - -#endif /* CFG_MONITOR_H */ diff --git a/examples/lpc2378/cfg/cfg_nmea.h b/examples/lpc2378/cfg/cfg_nmea.h deleted file mode 100644 index 9249a9af..00000000 --- a/examples/lpc2378/cfg/cfg_nmea.h +++ /dev/null @@ -1,85 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for NMEA module. - * - * \author Daniele Basile - */ - -#ifndef CFG_NMEA_H -#define CFG_NMEA_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define NMEA_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define NMEA_LOG_FORMAT LOG_FMT_TERSE - - -/** - * Maximum number of sentence parsers supported. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NMEAP_MAX_SENTENCES 8 - -/** - * Max length of a complete sentence. The standard says 82 bytes, but its probably - * better to go at least 128 since some units don't adhere to the 82 bytes - * especially for proprietary sentences. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NMEAP_MAX_SENTENCE_LENGTH 255 - -/** - * Max tokens in one sentence. 24 is enough for any standard sentence. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NMEAP_MAX_TOKENS 24 - -#endif /* CFG_NMEA_H */ - diff --git a/examples/lpc2378/cfg/cfg_phase.h b/examples/lpc2378/cfg/cfg_phase.h deleted file mode 100644 index c167776d..00000000 --- a/examples/lpc2378/cfg/cfg_phase.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for phase module. - * - * \version $Id: cfg_phase.h 2582 2009-04-20 12:33:48Z batt $ - * \author Daniele Basile - */ - -#ifndef CFG_PHASE_H -#define CFG_PHASE_H - -/** - * Max value of the duty cycle on triac. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_TRIAC_MAX_DUTY 100 - -/** - * Max value of the triac power. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_TRIAC_MAX_POWER 100 - -#endif /* CFG_PHASE_H */ diff --git a/examples/lpc2378/cfg/cfg_pocketbus.h b/examples/lpc2378/cfg/cfg_pocketbus.h deleted file mode 100644 index a331ec7f..00000000 --- a/examples/lpc2378/cfg/cfg_pocketbus.h +++ /dev/null @@ -1,50 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for pocketbus module. - * - * \version $Id: cfg_pocketbus.h 2580 2009-04-20 12:25:57Z batt $ - * - * \author Daniele Basile - */ - -#ifndef CFG_POCKETBUS_H -#define CFG_POCKETBUS_H - -/** - *Buffer len for pockebus protocol. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_POCKETBUS_BUFLEN 128 - -#endif /* CFG_POCKETBUS_H */ diff --git a/examples/lpc2378/cfg/cfg_proc.h b/examples/lpc2378/cfg/cfg_proc.h deleted file mode 100644 index eebcbf22..00000000 --- a/examples/lpc2378/cfg/cfg_proc.h +++ /dev/null @@ -1,108 +0,0 @@ -/** - * \file - * - * - * \brief Kernel configuration parameters - * - * \version $Id: cfg_proc.h 3255 2010-03-22 16:13:13Z batt $ - * \author Bernie Innocenti - */ - -#ifndef CFG_PROC_H -#define CFG_PROC_H - -/** - * Enable the multithreading kernel. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN 1 - -/** - * Kernel interrupt supervisor. WARNING: Experimental, still incomplete! - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_KERN_IRQ 0 - -/** - * Preemptive process scheduling. - * - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "timer" - */ -#define CONFIG_KERN_PREEMPT 1 - -/** - * Time sharing quantum (a prime number prevents interference effects) [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_KERN_QUANTUM 11 - -/** - * Priority-based scheduling policy. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_PRI 1 - -/** - * Dynamic memory allocation for processes. - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "heap" - */ -#define CONFIG_KERN_HEAP 1 - -/** - * Size of the dynamic memory pool used by processes. - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_KERN_HEAP_SIZE 16384L - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KERN_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KERN_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PROC_H */ diff --git a/examples/lpc2378/cfg/cfg_pwm.h b/examples/lpc2378/cfg/cfg_pwm.h deleted file mode 100644 index 8dfa279b..00000000 --- a/examples/lpc2378/cfg/cfg_pwm.h +++ /dev/null @@ -1,57 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for PWM module. - * - * \version $Id: cfg_pwm.h 2348 2009-02-16 13:43:44Z duplo $ - * \author Daniele Basile - */ - -#ifndef CFG_PWM_H -#define CFG_PWM_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define PWM_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define PWM_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PWM_H */ diff --git a/examples/lpc2378/cfg/cfg_ramp.h b/examples/lpc2378/cfg/cfg_ramp.h deleted file mode 100644 index 6d4b9dff..00000000 --- a/examples/lpc2378/cfg/cfg_ramp.h +++ /dev/null @@ -1,116 +0,0 @@ - /** - * \file - * - * - * \brief Configuration file Ramp algorithm module. - * - * \version $Id: cfg_ramp.h 2582 2009-04-20 12:33:48Z batt $ - * \author Daniele Basile - */ - -#ifndef CFG_RAMP_H -#define CFG_RAMP_H - -/** - * Define whether the ramp will use floating point calculation within ramp_evaluate(). - * Otherwise, a less precise fixed point version will be used, which is faster on - * platforms which do no support floating point operations. - * - * \note Floating point operations will be always done within ramp_compute() to - * precalculate values, so there has to be at least a floating point emulation support. - * - * $WIZ$ type = "boolean" - */ -#define RAMP_USE_FLOATING_POINT 0 - - -#if !RAMP_USE_FLOATING_POINT - - /** - * Number of least-significant bits which are stripped away during ramp evaluation. - * This setting allows to specify larger ramps at the price of less precision. - * - * The maximum ramp size allowed is 2^(24 + RAMP_CLOCK_SHIFT_PRECISION), in clocks. - * For instance, using RAMP_CLOCK_SHIFT_PRECISION 1, and a 8x prescaler, the maximum - * length of a ramp is about 6.7 secs. Raising RAMP_CLOCK_SHIFT_PRECISION to 2 - * brings the maximum length to 13.4 secs, at the price of less precision. - * - * ramp_compute() will check that the length is below the maximum allowed through - * a runtime assertion. - * - * \note This macro is used only for the fixed-point version of the ramp. - * $WIZ$ type = "int" - * $WIZ$ min = 0 - * $WIZ$ max = 32 - */ - #define RAMP_CLOCK_SHIFT_PRECISION 2 -#endif - - -/** -* Negative pulse width for ramp. -* $WIZ$ type = "int" -* $WIZ$ min = 1 -*/ -#define RAMP_PULSE_WIDTH 50 - -/** - * Default ramp time (microsecs). - * $WIZ$ type = "int" - * $WIZ$ min = 1000 - */ -#define RAMP_DEF_TIME 6000000UL -/** - * Default ramp maxfreq (Hz). - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define RAMP_DEF_MAXFREQ 5000 -/** - * Default ramp minfreq (Hz). - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define RAMP_DEF_MINFREQ 200 -/** - * Default ramp powerrun (deciampere). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define RAMP_DEF_POWERRUN 10 -/** - * Default ramp poweridle (Hz). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define RAMP_DEF_POWERIDLE 1 - -#endif /* CFG_RAMP_H */ diff --git a/examples/lpc2378/cfg/cfg_randpool.h b/examples/lpc2378/cfg/cfg_randpool.h deleted file mode 100644 index 4eb099e9..00000000 --- a/examples/lpc2378/cfg/cfg_randpool.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for randpool module. - * - * \version $Id: cfg_randpool.h 2950 2009-09-16 10:08:31Z asterix $ - * - * \author Daniele Basile - */ - -#ifndef CFG_RANDPOOL_H -#define CFG_RANDPOOL_H - - -/** - * Define a size, in byte, of entropy pool. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_SIZE_ENTROPY_POOL 64 - -/// Enable timer in randpool algo. $WIZ$ type = "boolean" -#define CONFIG_RANDPOOL_TIMER 1 - -#endif /* CFG_RANDPOOL_H */ - - diff --git a/examples/lpc2378/cfg/cfg_sem.h b/examples/lpc2378/cfg/cfg_sem.h deleted file mode 100644 index 1d3c674f..00000000 --- a/examples/lpc2378/cfg/cfg_sem.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Kernel semaphores configuration parameters. - * - * \version $Id: cfg_sem.h 2418 2009-03-25 15:57:34Z batt $ - * \author Bernie Innocenti - */ - -#ifndef CFG_SEM_H -#define CFG_SEM_H - -/** - * Re-entrant mutual exclusion primitives. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SEMAPHORES 0 - -#endif /* CFG_SEM_H */ diff --git a/examples/lpc2378/cfg/cfg_ser.h b/examples/lpc2378/cfg/cfg_ser.h deleted file mode 100644 index 91a10e0b..00000000 --- a/examples/lpc2378/cfg/cfg_ser.h +++ /dev/null @@ -1,222 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for serial module. - * - * \author Daniele Basile - */ - -#ifndef CFG_SER_H -#define CFG_SER_H - -/** - * Example of setting for serial port and - * spi port. - * Edit these define for your project. - */ - -/** - * Size of the outbound FIFO buffer for port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_UART0_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_UART0_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)" - */ -#define CONFIG_UART1_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)" - */ -#define CONFIG_UART1_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 2 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2" - */ -#define CONFIG_UART2_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 2 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2" - */ -#define CONFIG_UART2_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 3 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lpc2" - */ -#define CONFIG_UART3_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 3 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lpc2" - */ -#define CONFIG_UART3_RXBUFSIZE 32 - - -/** - * Size of the outbound FIFO buffer for SPI port [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for SPI port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI0_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI0_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for SPI port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI1_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI1_RXBUFSIZE 32 - -/** - * SPI data order. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_order_bit" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST - -/** - * SPI clock division factor. - * $WIZ$ type = "int" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_DIV 16 - -/** - * SPI clock polarity: normal low or normal high. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_spi_pol" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW - -/** - * SPI clock phase you can choose sample on first edge or - * sample on second clock edge. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_spi_phase" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE - -/** - * Default transmit timeout (ms). Set to -1 to disable timeout support. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_SER_TXTIMEOUT -1 - -/** - * Default receive timeout (ms). Set to -1 to disable timeout support. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_SER_RXTIMEOUT -1 - -/** - * Use RTS/CTS handshake. - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_SER_HWHANDSHAKE 0 - -/** - * Default baudrate for all serial ports (set to 0 to disable). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_SER_DEFBAUDRATE 0UL - -/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean" -#define CONFIG_SER_STROBE 0 - -#endif /* CFG_SER_H */ diff --git a/examples/lpc2378/cfg/cfg_signal.h b/examples/lpc2378/cfg/cfg_signal.h deleted file mode 100644 index fabbb666..00000000 --- a/examples/lpc2378/cfg/cfg_signal.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Kernel signals configuration parameters - * - * \version $Id: cfg_signal.h 2418 2009-03-25 15:57:34Z batt $ - * \author Bernie Innocenti - */ - -#ifndef CFG_SIGNAL_H -#define CFG_SIGNAL_H - -/** - * Inter-process signals. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SIGNALS 0 - -#endif /* CFG_SIGNAL_H */ diff --git a/examples/lpc2378/cfg/cfg_spi_bitbang.h b/examples/lpc2378/cfg/cfg_spi_bitbang.h deleted file mode 100644 index 8761d44a..00000000 --- a/examples/lpc2378/cfg/cfg_spi_bitbang.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for SPI bitbang module. - * - * \version $Id: cfg_spi_bitbang.h 2348 2009-02-16 13:43:44Z duplo $ - * - * \author Daniele Basile - */ - -#ifndef CFG_SPI_BITBANG_H -#define CFG_SPI_BITBANG_H - -/** - * Set data order for emulated SPI. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ordet_bit_list" - */ -#define CONFIG_SPI_DATAORDER SPI_LSB_FIRST - -#endif /* CFG_SPI_BITBANG_H */ - diff --git a/examples/lpc2378/cfg/cfg_stepper.h b/examples/lpc2378/cfg/cfg_stepper.h deleted file mode 100644 index 9dbf0e84..00000000 --- a/examples/lpc2378/cfg/cfg_stepper.h +++ /dev/null @@ -1,70 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for stepper motor module. - * - * \version $Id: cfg_stepper.h 2582 2009-04-20 12:33:48Z batt $ - * \author Daniele Basile - */ - -#ifndef CFG_STEPPER_H -#define CFG_STEPPER_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define STEPPER_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define STEPPER_LOG_FORMAT LOG_FMT_TERSE - -/** - * Max number of the stepper motor. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NUM_STEPPER_MOTORS 6 - -/** - * Max number of the timer usable on target to drive stepper motor. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_TC_STEPPER_MAX_NUM 6 - -#endif /* CFG_STEPPER_H */ diff --git a/examples/lpc2378/cfg/cfg_tas5706a.h b/examples/lpc2378/cfg/cfg_tas5706a.h deleted file mode 100644 index dcebde4b..00000000 --- a/examples/lpc2378/cfg/cfg_tas5706a.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the TAS5706A module. - * - * \version $Id: cfg_tas5706a.h 2740 2009-07-06 08:16:22Z lottaviano $ - * \author Luca Ottaviano - */ - -#ifndef CFG_TAS5706A_H -#define CFG_TAS5706A_H - -/** - * Maximum output volume for TAS chip [dB]. - * - * $WIZ$ type = "int" - * $WIZ$ min = -100 - * $WIZ$ max = 24 - */ -#define CONFIG_TAS_MAX_VOL -39 - -#endif /* CFG_TAS5706A_H */ diff --git a/examples/lpc2378/cfg/cfg_thermo.h b/examples/lpc2378/cfg/cfg_thermo.h deleted file mode 100644 index ed8deb41..00000000 --- a/examples/lpc2378/cfg/cfg_thermo.h +++ /dev/null @@ -1,58 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for thermo module. - * - * \version $Id: cfg_thermo.h 2574 2009-04-20 10:50:42Z batt $ - * \author Daniele Basile - */ - -#ifndef CFG_THERMO_H -#define CFG_THERMO_H - -/** - * Interval at which thermo control is performed [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_THERMO_INTERVAL_MS 100 - -/** - * Number of different samples we interpolate over to get the hifi temperature. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_THERMO_HIFI_NUM_SAMPLES 10 - -#endif /* CFG_THERMO_H */ diff --git a/examples/lpc2378/cfg/cfg_timer.h b/examples/lpc2378/cfg/cfg_timer.h deleted file mode 100644 index d0475d5f..00000000 --- a/examples/lpc2378/cfg/cfg_timer.h +++ /dev/null @@ -1,68 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for timer module. - * - * \version $Id: cfg_timer.h 2348 2009-02-16 13:43:44Z duplo $ - * - * \author Daniele Basile - */ - -#ifndef CFG_TIMER_H -#define CFG_TIMER_H - -/** - * Hardware timer selection for drv/timer.c. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "timer_select" - */ -#define CONFIG_TIMER TIMER_DEFAULT - -/** - * Debug timer interrupt using a strobe pin. - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_STROBE 0 - -/** - * Enable asynchronous timers. - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_EVENTS 1 - -/** - * Support hi-res timer_usleep(). - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_UDELAY 1 - -#endif /* CFG_TIMER_H */ diff --git a/examples/lpc2378/cfg/cfg_wdt.h b/examples/lpc2378/cfg/cfg_wdt.h deleted file mode 100644 index 0e491b10..00000000 --- a/examples/lpc2378/cfg/cfg_wdt.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for watchdog module. - * - * \version $Id: cfg_wdt.h 2576 2009-04-20 11:03:51Z batt $ - * - * \author Daniele Basile - */ - -#ifndef CFG_WDT_H -#define CFG_WDT_H - -/// Enable watchdog timer. $WIZ$ type = "autoenabled" -#define CONFIG_WATCHDOG 0 - -#endif /* CFG_WDT_H */ - - diff --git a/examples/lpc2378/cfg/cfg_xmodem.h b/examples/lpc2378/cfg/cfg_xmodem.h deleted file mode 100644 index 3e092c21..00000000 --- a/examples/lpc2378/cfg/cfg_xmodem.h +++ /dev/null @@ -1,67 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for xmodem module. - * - * \version $Id: cfg_xmodem.h 2579 2009-04-20 12:25:40Z batt $ - * - * \author Daniele Basile - */ - -#ifndef CFG_XMODEM_H -#define CFG_XMODEM_H - -/// Enable Rx. $WIZ$ type = "boolean" -#define CONFIG_XMODEM_RECV 1 - -/// Enable TX. $WIZ$ type = "boolean" -#define CONFIG_XMODEM_SEND 1 - -/// Allow a Rx/Tx of 1Kbyte block. $WIZ$ type = "boolean" -#define CONFIG_XMODEM_1KCRC 1 - -/** - * Max retries before giving up. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_XMODEM_MAXRETRIES 15 - -/** - * Max retries before switching to BCC. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_XMODEM_MAXCRCRETRIES 7 - -#endif /* CFG_XMODEM_H */ - diff --git a/examples/lpc2378/hw/hw_afsk.h b/examples/lpc2378/hw/hw_afsk.h deleted file mode 100644 index a0a348d9..00000000 --- a/examples/lpc2378/hw/hw_afsk.h +++ /dev/null @@ -1,87 +0,0 @@ -/** - * \file - * - * - * \brief AFSK modem hardware-specific definitions. - * - * \version $Id: hw_afsk.h 3072 2009-10-10 13:01:56Z batt $ - * - * \author Francesco Sacchi - */ - -#ifndef HW_AFSK_H -#define HW_AFSK_H - -#include "cfg/cfg_arch.h" - -#warning TODO:This is an example implementation, you must implement it! - -/** - * Initialize the specified channel of the ADC for AFSK needs. - * The adc should be configured to have a continuos stream of convertions. - * For every convertion there must be an ISR that read the sample - * and call afsk_adc_isr(), passing the context and the sample. - * - * \param ch channel to be used for AFSK demodulation. - * \param ctx AFSK context (\see Afsk). This parameter must be saved and - * passed back to afsk_adc_isr() for every convertion. - */ -#define AFSK_ADC_INIT(ch, ctx) do { (void)ch, (void)ctx; } while (0) - -#define AFSK_STROBE_INIT() do { /* Implement me */ } while (0) -#define AFSK_STROBE_ON() do { /* Implement me */ } while (0) -#define AFSK_STROBE_OFF() do { /* Implement me */ } while (0) - -/** - * Initialize the specified channel of the DAC for AFSK needs. - * The DAC has to be configured in order to call an ISR for every sample sent. - * The DAC doesn't have to start the IRQ immediatly but have to wait - * the AFSK driver to call AFSK_DAC_IRQ_START(). - * The ISR must then call afsk_dac_isr() passing the AFSK context. - * \param ch DAC channel to be used for AFSK modulation. - * \param ctx AFSK context (\see Afsk). This parameter must be saved and - * passed back to afsk_dac_isr() for every convertion. - */ -#define AFSK_DAC_INIT(ch, ctx) do { (void)ch, (void)ctx; } while (0) - -/** - * Start DAC convertions on channel \a ch. - * \param ch DAC channel. - */ -#define AFSK_DAC_IRQ_START(ch) do { (void)ch; /* Implement me */ } while (0) - -/** - * Stop DAC convertions on channel \a ch. - * \param ch DAC channel. - */ -#define AFSK_DAC_IRQ_STOP(ch) do { (void)ch; /* Implement me */ } while (0) - -#endif /* HW_AFSK_H */ diff --git a/examples/lpc2378/hw/hw_buzzer.h b/examples/lpc2378/hw/hw_buzzer.h deleted file mode 100644 index 01683c85..00000000 --- a/examples/lpc2378/hw/hw_buzzer.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - * \file - * - * - * \brief Buzzer hardware-specific definitions - * - * \version $Id: hw_buzzer.h 2506 2009-04-15 08:29:07Z duplo $ - * - * \author Francesco Sacchi - */ - -#ifndef HW_BUZZER_H -#define HW_BUZZER_H - -#warning TODO:This is an example implementation, you must implement it! - -#define BUZZER_BIT 1 -#define IS_BUZZER_ON 0 -#define BUZZER_HW_INIT do { /* Implement me! */ } while (0) -#define BUZZER_ON do { /* Implement me! */ } while (0) -#define BUZZER_OFF do { /* Implement me! */ } while (0) - -#endif /* HW_BUZZER_H */ diff --git a/examples/lpc2378/hw/hw_dataflash.c b/examples/lpc2378/hw/hw_dataflash.c deleted file mode 100644 index b3944b37..00000000 --- a/examples/lpc2378/hw/hw_dataflash.c +++ /dev/null @@ -1,126 +0,0 @@ -/** - * \file - * - * - * \brief Dataflash HW control routines. - * - * \version $Id: hw_dataflash.c 1398 2008-05-27 16:36:05Z asterix $ - * \author Francesco Sacchi - */ - -#include "hw/hw_dataflash.h" - -#include -#include -#include - -#warning TODO:This is an example implementation, you must implement it! - -MOD_DEFINE(hw_dataflash); - -/** - * Data flash init function. - * - * This function provide to initialize all that - * needs to drive a dataflash memory. - * Generaly needs to init pins to drive a CS line - * and reset line. - */ -void dataflash_hw_init(void) -{ - - //Disable CS line (remove if not needed) - dataflash_hw_setCS(false); - - /* - * Put here your code! - * - * Note: - * - if you drive manualy CS line, here init a CS pin - * - if you use a dedicated reset line, here init a reset pin - */ - - MOD_INIT(hw_dataflash); -} - -/** - * Chip Select drive. - * - * This function enable or disable a CS line. - * You must implement this function comply to a dataflash - * memory datasheet to allow the drive to enable a memory - * when \p enable flag is true, and disable it when is false. - */ -void dataflash_hw_setCS(bool enable) -{ - if (enable) - { - /* - * Put here your code to enable - * dataflash memory - */ - } - else - { - /* - * Put here your code to disable - * dataflash memory - */ - } -} - -/** - * Reset data flash memory. - * - * This function provide to send reset signal to - * dataflash memory. You must impement it comly to a dataflash - * memory datasheet to allow the drive to set a reset pin - * when \p enable flag is true, and disable it when is false. - * - */ -void dataflash_hw_setReset(bool enable) -{ - if (enable) - { - /* - * Put here your code to set reset of - * dataflash memory - */ - } - else - { - /* - * Put here your code to clear reset of - * dataflash memory - */ - } -} - diff --git a/examples/lpc2378/hw/hw_dataflash.h b/examples/lpc2378/hw/hw_dataflash.h deleted file mode 100644 index 8c2f0b89..00000000 --- a/examples/lpc2378/hw/hw_dataflash.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Dataflash HW control routines (interface). - * - * \version $Id: hw_dataflash.h 1312 2008-05-20 16:54:52Z asterix $ - * \author Francesco Sacchi - */ - -#ifndef HW_DATAFLASH_H -#define HW_DATAFLASH_H - -#include - -void dataflash_hw_init(void); -void dataflash_hw_setCS(bool enable); -void dataflash_hw_setReset(bool enable); - -#endif /* HW_DATAFLASH_H */ diff --git a/examples/lpc2378/hw/hw_dc_motor.h b/examples/lpc2378/hw/hw_dc_motor.h deleted file mode 100644 index 913ead7d..00000000 --- a/examples/lpc2378/hw/hw_dc_motor.h +++ /dev/null @@ -1,85 +0,0 @@ -/** - * \file - * - * - * \brief DC motor hardware-specific definitions - * - * \version $Id: hw_dc_motor.h 2859 2009-09-02 09:30:18Z asterix $ - * - * \author Daniele Basile - */ - -#ifndef HW_DC_MOTOR_H -#define HW_DC_MOTOR_H - -typedef enum MotorDCMap -{ - - /* Put here motor dc declaration */ - MOTOR_DC_CNT - -} MotorDCMap; - -/* - * Init all pin and device to manage dc motor. - */ -#define MOTOR_DC_INIT() \ - do { \ - /* Implement me! */ \ - } while (0) - - -/* - * Enable DC motor. - */ -#define DC_MOTOR_ENABLE(dev) \ - do { \ - /* Implement me! */ \ - } while (0) - -/* - * Disable DC motor. - */ -#define DC_MOTOR_DISABLE(dev) \ - do { \ - /* Implement me! */ \ - } while (0) - -/* - * Set direction for DC motor. - */ -#define DC_MOTOR_SET_DIR(dev, dir) \ - do { \ - /* Implement me! */ \ - } while (0) - - -#endif /* HW_DC_MOTOR_H */ diff --git a/examples/lpc2378/hw/hw_ft245rl.h b/examples/lpc2378/hw/hw_ft245rl.h deleted file mode 100644 index 34b157f6..00000000 --- a/examples/lpc2378/hw/hw_ft245rl.h +++ /dev/null @@ -1,65 +0,0 @@ -/** - * \file - * - * - * \brief FT245RL USB interface hardware-specific definitions - * - * \version $Id: hw_ft245rl.h 1777 2008-09-04 15:19:48Z batt $ - * - * \author Francesco Sacchi - */ - -#ifndef HW_FT245RL_H -#define HW_FT245RL_H - -#warning TODO:This is an example implementation, you must implement it! - -#define FT245RL_DATA_IN() /* Implement me! */ -#define FT245RL_DATA_OUT() /* Implement me! */ -#define WR_HI /* Implement me! */ -#define WR_LO /* Implement me! */ - -#define RD_HI /* Implement me! */ -#define RD_LO /* Implement me! */ - -#define FT245RL_INIT() \ -do \ -{ \ - /* Implement me! */ \ -} while(0) - -#define FT245RL_DATA_RDY() (/* Implement me! */ false) -#define FT245RL_GETDATA() ({/* Implement me! */ (0);}) -#define FT245RL_TX_ALLOWED() (/* Implement me! */ false) -#define FT245RL_SETDATA(data) do {/* Implement me! */ (void)((data)); } while(0) - -#endif /* HW_FT245RL_H */ - diff --git a/examples/lpc2378/hw/hw_i2c_bitbang.h b/examples/lpc2378/hw/hw_i2c_bitbang.h deleted file mode 100644 index 743e28b7..00000000 --- a/examples/lpc2378/hw/hw_i2c_bitbang.h +++ /dev/null @@ -1,66 +0,0 @@ -/** - * \file - * - * - * \brief Macro for I2C bitbang operation. - * - * - * \version $Id: hw_i2c_bitbang.h 2506 2009-04-15 08:29:07Z duplo $ - * - * \author Francesco Sacchi - */ - -#ifndef HW_I2C_BITBANG_H -#define HW_I2C_BITBANG_H - -#warning TODO:This is an example implementation, you must implement it! - -#define SDA_HI do { /* Implement me:Set SDA High by setting SDA pin as input */ } while (0) -#define SDA_LO do { /* Implement me:Set SDA Low by setting SDA pin as open collector output */ } while (0) -#define SCL_HI do { /* Implement me:Set SCL High by setting SCL pin as input */ } while (0) -#define SCL_LO do { /* Implement me:Set SCL Low by setting SCL pin as open collector output */ } while (0) - - -#define SCL_IN (true) /* Implement me: read SDA pin state */ -#define SDA_IN (true) /* Implement me: read SCL pin state */ - -/** - * This macro should set SDA and SCL lines as input. - */ -#define I2C_BITBANG_HW_INIT do { /* Implement me! */ } while (0) - -/** - * Half bit delay routine used to generate the correct timings. - */ -#define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0) - -#endif /* HW_I2C_BITBANG_H */ diff --git a/examples/lpc2378/hw/hw_kbd.h b/examples/lpc2378/hw/hw_kbd.h deleted file mode 100644 index 2c59dd58..00000000 --- a/examples/lpc2378/hw/hw_kbd.h +++ /dev/null @@ -1,72 +0,0 @@ -/** - * \file - * - * - * \brief Keyboard hardware-specific definitions - * - * \version $Id: hw_kbd.h 2649 2009-04-23 12:51:28Z duplo $ - * - * \author Francesco Sacchi - * \author Stefano Fedrigo - */ - -#ifndef HW_KBD_H -#define HW_KBD_H - -#include "hw/kbd_map.h" - -#include - -#warning TODO:This is an example implementation, you must implement it! - -#define K_RPT_MASK (K_UP | K_DOWN | K_OK | K_CANCEL) - -#define KBD_HW_INIT \ - do { \ - /* Put here code to init hw */ \ - } while (0) - -EXTERN_C int emul_kbdReadCols(void); - -/** - * Read the keyboard ports and return the mask of - * depressed keys. - */ -INLINE keymask_t kbd_readkeys(void) -{ - /* Implement me! */ - - //Only for test remove when implement this function - return 0; -} - -#endif /* HW_KBD_H */ diff --git a/examples/lpc2378/hw/hw_lcd_32122a.h b/examples/lpc2378/hw/hw_lcd_32122a.h deleted file mode 100644 index 6ec29c5c..00000000 --- a/examples/lpc2378/hw/hw_lcd_32122a.h +++ /dev/null @@ -1,155 +0,0 @@ -/** - * \file - * - * - * \brief Displaytech 32122A LCD driver - * - * \author Bernie Innocenti - * \author Stefano Fedrigo - * - */ - -#ifndef HW_LCD_32122A_H -#define HW_LCD_32122A_H - -#include -#include - -#warning TODO:This is an example implementation, you must implement it! - -/** - * Predefined LCD PWM contrast values - */ -#define LCD_DEF_PWM 145 -#define LCD_MAX_PWM 505 -#define LCD_MIN_PWM 130 -#define LCD_PWM_CH 0 - - -/** - * \name LCD I/O pins/ports - * @{ - */ -#define LCD_RS /* Implement me! */ -#define LCD_RW /* Implement me! */ -#define LCD_PE_E1 /* Implement me! */ -#define LCD_PE_E2 /* Implement me! */ -#define LCD_DB0 /* Implement me! */ -#define LCD_DB1 /* Implement me! */ -#define LCD_DB2 /* Implement me! */ -#define LCD_DB3 /* Implement me! */ -#define LCD_DB4 /* Implement me! */ -#define LCD_DB5 /* Implement me! */ -#define LCD_DB6 /* Implement me! */ -#define LCD_DB7 /* Implement me! */ -#define LCD_PF_DB0 /* Implment me! */ -/*@}*/ - -/** - * \name LCD bus control macros - * @{ - */ -#define LCD_CLR_A0 do { /* Implement me! */ } while (0) -#define LCD_SET_A0 do { /* Implement me! */ } while (0) -#define LCD_CLR_RD do { /* Implement me! */ } while (0) -#define LCD_SET_RD do { /* Implement me! */ } while (0) -#define LCD_CLR_E1 do { /* Implement me! */ } while (0) -#define LCD_SET_E1 do { /* Implement me! */ } while (0) -#define LCD_CLR_E2 do { /* Implement me! */ } while (0) -#define LCD_SET_E2 do { /* Implement me! */ } while (0) -#define LCD_SET_E(x) do { (void)x; /* Implement me! */ } while (0) -#define LCD_CLR_E(x) do { (void)x; /* Implement me! */ } while (0) -/*@}*/ - -/** - * \name Chip select bits for LCD_SET_E() - * @{ - */ -#define LCDF_E1 ( 0/* Implement me! */) -#define LCDF_E2 ( 0/* Implement me! */) -/*@}*/ -/** Read from the LCD data bus (DB[0-7]) */ -#define LCD_WRITE(x) ((void)x)/* Implement me! */ -/** Write to the LCD data bus (DB[0-7]) */ -#define LCD_READ (0 /* Implement me! */ ) - -/** Set data bus direction to output (write to display) */ -#define LCD_DB_OUT /* Implement me! */ - -/** Set data bus direction to input (read from display) */ -#define LCD_DB_IN /* Implement me! */ - -/** Delay for write (Enable pulse width, 220ns) */ -#define LCD_DELAY_WRITE \ - do { \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - } while (0) - -/** Delay for read (Data ouput delay time, 120ns) */ -#define LCD_DELAY_READ \ - do { \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - } while (0) - - -#define LCD_32122_RESET() do { /* Implement me! */ } while (0) - -INLINE void lcd_32122a_hw_bus_init(void) -{ - cpu_flags_t flags; - IRQ_SAVE_DISABLE(flags); - - /* - * Here set bus pin! - * to init a lcd device. - * - */ - - /* - * Data bus is in output state most of the time: - * LCD r/w functions assume it is left in output state - */ - LCD_DB_OUT; - - - IRQ_RESTORE(flags); -} - -#endif /* HW_LCD_32122A_H */ - diff --git a/examples/lpc2378/hw/hw_lcd_hd44.h b/examples/lpc2378/hw/hw_lcd_hd44.h deleted file mode 100644 index dfebbcab..00000000 --- a/examples/lpc2378/hw/hw_lcd_hd44.h +++ /dev/null @@ -1,157 +0,0 @@ -/** - * \file - * - * - * \brief LCD low-level hardware macros - * - * \author Bernie Innocenti - * \author Stefano Fedrigo - * - */ - -#ifndef HW_LCD_HD44_H -#define HW_LCD_HD44_H - -#include "cfg/cfg_lcd_hd44.h" /* CONFIG_LCD_4BIT */ - -#include -#include - -#warning TODO:This is an example implementation, you must implement it! - -/** - * \name LCD I/O pins/ports - * @{ - */ -#define LCD_RS /* Implement me! */ -#define LCD_RW /* Implement me! */ -#define LCD_E /* Implement me! */ -#define LCD_DB0 /* Implement me! */ -#define LCD_DB1 /* Implement me! */ -#define LCD_DB2 /* Implement me! */ -#define LCD_DB3 /* Implement me! */ -#define LCD_DB4 /* Implement me! */ -#define LCD_DB5 /* Implement me! */ -#define LCD_DB6 /* Implement me! */ -#define LCD_DB7 /* Implement me! */ -/*@}*/ - -/** - * \name DB high nibble (DB[4-7]) - * @{ - */ - -#if CONFIG_LCD_4BIT - #define LCD_MASK (LCD_DB7 | LCD_DB6 | LCD_DB5 | LCD_DB4) - #define LCD_SHIFT 4 -#else - #define LCD_MASK (uint8_t)0xff - #define LCD_SHIFT 0 -#endif -/*@}*/ - -/** - * \name LCD bus control macros - * @{ - */ -#define LCD_CLR_RS /* Implement me! */ -#define LCD_SET_RS /* Implement me! */ -#define LCD_CLR_RD /* Implement me! */ -#define LCD_SET_RD /* Implement me! */ -#define LCD_CLR_E /* Implement me! */ -#define LCD_SET_E /* Implement me! */ - -/* Enter command mode */ -#define LCD_SET_COMMAND() /* Implement me! */ - -/* Enter data mode */ -#define LCD_SET_DATA() /* Implement me! */ - -#if CONFIG_LCD_4BIT - #define LCD_WRITE_H(x) ((void)x)/* Implement me! */ - #define LCD_WRITE_L(x) ((void)x)/* Implement me! */ - #define LCD_READ_H ( 0 /* Implement me! */ ) - #define LCD_READ_L ( 0 /* Implement me! */ ) -#else - #define LCD_WRITE(x) ((void)x)/* Implement me! */ - #define LCD_READ (0 /* Implement me! */ ) -#endif -/*@}*/ - -/** Set data bus direction to output (write to display) */ -#define LCD_DB_OUT /* Implement me! */ - -/** Set data bus direction to input (read from display) */ -#define LCD_DB_IN /* Implement me! */ -/** Delay for write (Enable pulse width, 220ns) */ -#define LCD_DELAY_WRITE \ - do { \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - } while (0) - -/** Delay for read (Data ouput delay time, 120ns) */ -#define LCD_DELAY_READ \ - do { \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - } while (0) - - - -INLINE void lcd_hd44_hw_bus_init(void) -{ - cpu_flags_t flags; - IRQ_SAVE_DISABLE(flags); - - /* - * Here set bus pin! - * to init a lcd device. - * - */ - - /* - * Data bus is in output state most of the time: - * LCD r/w functions assume it is left in output state - */ - LCD_DB_OUT; - - - IRQ_RESTORE(flags); -} - -#endif /* HW_LCD_HD44_H */ diff --git a/examples/lpc2378/hw/hw_led.h b/examples/lpc2378/hw/hw_led.h deleted file mode 100644 index e8c055b3..00000000 --- a/examples/lpc2378/hw/hw_led.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - * \file - * - * - * \brief LED on/off macros for LPC-P2378. - * - * \author Andrea Righi - */ - -#ifndef HW_LED_H -#define HW_LED_H - -#include - -#define STATUS_LED (1 << 19) - -#define LED_ON() do { IOCLR1 = STATUS_LED; } while (0) -#define LED_OFF() do { IOSET1 = STATUS_LED; } while (0) - -#define LED_INIT() do { IODIR1 |= STATUS_LED; } while (0) - -#endif /* HW_LED_H */ diff --git a/examples/lpc2378/hw/hw_lm75.h b/examples/lpc2378/hw/hw_lm75.h deleted file mode 100644 index 290dae09..00000000 --- a/examples/lpc2378/hw/hw_lm75.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - * \file - * - * - * \brief Hardware macro definition. - * - * \author Daniele Basile - */ - -#ifndef HW_LM75_H -#define HW_LM75_H - -#warning TODO:This is an example implentation, you must implement it! - -#define LM75_HW_INIT() \ - do { \ - /* Pin init */\ - } while (0) - -#endif /* HW_LM75_H */ - diff --git a/examples/lpc2378/hw/hw_mcp41.c b/examples/lpc2378/hw/hw_mcp41.c deleted file mode 100644 index 2a8415df..00000000 --- a/examples/lpc2378/hw/hw_mcp41.c +++ /dev/null @@ -1,53 +0,0 @@ -/** - * \file - * - * - * \brief MCP41 hardware-specific definitions - * - * \version $Id: hw_mcp41.c 2506 2009-04-15 08:29:07Z duplo $ - * \author Francesco Sacchi - */ - -#include "hw/hw_mcp41.h" - -#include -#include - -#warning TODO:This is an example implementation, you must implement it! - -const uint16_t mcp41_ports[MCP41_CNT] = -{ - 0, /* add here mcp41 ports */ -}; -const uint8_t mcp41_pins [MCP41_CNT] = -{ - 0, /* add here mcp41 ports */ -}; - diff --git a/examples/lpc2378/hw/hw_mcp41.h b/examples/lpc2378/hw/hw_mcp41.h deleted file mode 100644 index b1b5cd03..00000000 --- a/examples/lpc2378/hw/hw_mcp41.h +++ /dev/null @@ -1,75 +0,0 @@ -/** - * \file - * - * - * \brief MCP41 hardware-specific definitions - * - * \version $Id: hw_mcp41.h 2544 2009-04-17 14:21:09Z batt $ - * \author Francesco Sacchi - */ - -#ifndef HW_MCP41_H -#define HW_MCP41_H - -#include "hw/mcp41_map.h" - -#include - - -#warning TODO:This is an example implementation, you must implement it! - - -INLINE void SET_MCP41_DDR(Mcp41Dev dev) -{ - /* Implement me! */ - //Warning: this funtions is like avr target name, - //fix it to comply for all target. - - //Only for test remove when implement this function - (void)dev; -} - -INLINE void MCP41_ON(Mcp41Dev i) -{ - /* Implement me! */ - - //Only for test remove when implement this function - (void)i; -} - -INLINE void MCP41_OFF(Mcp41Dev i) -{ - /* Implement me! */ - - //Only for test remove when implement this function - (void)i; -} - -#endif /* HW_MCP41_H */ diff --git a/examples/lpc2378/hw/hw_ntc.c b/examples/lpc2378/hw/hw_ntc.c deleted file mode 100644 index b8c56914..00000000 --- a/examples/lpc2378/hw/hw_ntc.c +++ /dev/null @@ -1,46 +0,0 @@ -/** - * \file - * - * - * \brief NTC hardware-specific definition - * - * \version $Id: hw_ntc.h 1359 2008-05-26 09:42:37Z asterix $ - * \author Lorenzo Berni - * - */ - -#include -#include "hw/ntc_map.h" - -const res_t NTC_RSER[NTC_CNT]; -const res_t NTC_RPAR[NTC_CNT]; -const amp_t NTC_AMP[NTC_CNT]; -const NtcHwInfo* NTC_INFO[NTC_CNT]; diff --git a/examples/lpc2378/hw/hw_ntc.h b/examples/lpc2378/hw/hw_ntc.h deleted file mode 100644 index d3976b02..00000000 --- a/examples/lpc2378/hw/hw_ntc.h +++ /dev/null @@ -1,136 +0,0 @@ -/** - * \file - * - * - * \brief NTC hardware-specific definition - * - * \version $Id: hw_ntc.h 1359 2008-05-26 09:42:37Z asterix $ - * \author Francesco Sacchi - * - * A NTC acts as a variable resistor, whose resistance changes as a - * function of the temperature it measures. To sample it correctly, it is - * usually parallelized and serialized with two fixed resistor. The following diagram shows - * what is the exact disposition of the components, as handled by this - * library: - * - *
- *                 o Vref
- *                 |
- *                 |                               o Vref
- *                 |                               |
- *               -----                             |
- *              |     |                        ---------
- *              | Rser|                       |         |
- *              |     |                       |         |
- *               -----     -----              |   ADC   |
- *                 | Vp   |     |             |         |
- *      -----------|------| Amp |-------------|         |
- *     |           |      |     |      Vadc   |         |
- *   -----       -----     -----               ---------
- *  |     |     |     |
- *  | NTC |     | Rpar|
- *  |     |     |     |
- *   -----       -----
- *     |           |
- *     |           |
- *   -----       -----
- *    ---         ---
- *
- * Amp is an amplifier that amplify of AMP times the signal. - * If we indicate Rp as the parallel of NTC with Rpar, ADCBITS as the bits of the ad converter - * and ADCVAL as the result from the adc convertion (Not Vadc but just the value read - * from the adc register), after various calculation, the expression of Rp is: - * - *
- *
- *            ADCVAL * Rser
- * Rp = ------------------------
- *         ADCBITS
- *	2         * AMP - ADCVAL
- *
- * - * And after that NTC obvisiously is: - *
- *        Rpar * Rp
- * NTC = ----------
- *        Rpar - Rp
- *
- * - * - * The function ntc_hw_read() compute the resistence using these formulas above. - */ - -#ifndef HW_NTC_H -#define HW_NTC_H - -#include "ntc_map.h" - -#include - -#include -#include - -#warning TODO:This is an example implementation, you must implement it! - -extern const res_t NTC_RSER[NTC_CNT]; -extern const res_t NTC_RPAR[NTC_CNT]; -extern const amp_t NTC_AMP[NTC_CNT]; -extern const NtcHwInfo* NTC_INFO[NTC_CNT]; - - -/*! - * Read the resistence of ntc device \a dev. - * Return the result in res_t type. - */ -INLINE res_t ntc_hw_read(NtcDev dev) -{ - ASSERT(dev < NTC_CNT); - // See above for formula explanation. - adcread_t adcval = adc_read((uint16_t)dev); - float rp = (adcval * NTC_RSER[dev] ) / ((1 << adc_bits()) * NTC_AMP[dev] - adcval); - - //kprintf("Rp[%f], Rntc[%f]\n", rp/100, ((NTC_RPAR[dev] * rp) / (NTC_RPAR[dev] - rp)) / 100.0); - - return ( (NTC_RPAR[dev] * rp) / (NTC_RPAR[dev] - rp) ); -} - - -/*! - * Return the info (aka the table) associated with ntc device \a dev. - */ -INLINE const NtcHwInfo* ntc_hw_getInfo(NtcDev dev) -{ - return NTC_INFO[dev]; -} - -#define NTC_HW_INIT do { /* Implement me! */ } while(0) - -#endif /* HW_NTC_H */ diff --git a/examples/lpc2378/hw/hw_phase.c b/examples/lpc2378/hw/hw_phase.c deleted file mode 100644 index f58fe9a2..00000000 --- a/examples/lpc2378/hw/hw_phase.c +++ /dev/null @@ -1,46 +0,0 @@ -/** - * \file - * - * - * \brief Phase control hardware-specific definitions - * - * \version $Id: hw_phase.c 1398 2008-05-27 16:36:05Z asterix $ - * \author Francesco Sacchi - */ - -#ifndef HW_PHASE_H -#define HW_PHASE_H - -#include "hw/hw_phase.h" - -#warning TODO:This is an example implementation, you must implement it! - -#endif /* HW_PHASE_H */ diff --git a/examples/lpc2378/hw/hw_phase.h b/examples/lpc2378/hw/hw_phase.h deleted file mode 100644 index bb7d3c69..00000000 --- a/examples/lpc2378/hw/hw_phase.h +++ /dev/null @@ -1,80 +0,0 @@ -/** - * \file - * - * - * \brief Phase control hardware-specific definitions - * - * \version $Id: hw_phase.h 2564 2009-04-20 09:51:04Z batt $ - * - * \author Francesco Sacchi - */ - -#ifndef HW_PHASE_H -#define HW_PHASE_H - -#include "hw/phase_map.h" - -#include - -#warning TODO:This is an example implementation, you must implement it! - -#define PHASE_HW_INIT do { /* Implement me! */ }while (0) - -INLINE void TRIAC_OFF(TriacDev i) -{ - /* Implement me! */ - - //Only for test remove when implement this function - (void)i; -} - - -INLINE void TRIAC_ON(TriacDev i) -{ - /* Implement me! */ - - //Only for test remove when implement this function - (void)i; -} - -INLINE void SET_TRIAC_DDR(TriacDev i) -{ - /* Implement me! */ - - //Only for test remove when implement this function - (void)i; -} - -void zerocross_isr(void); -#define DEFINE_ZEROCROSS_ISR() void zerocross_isr(void) - - -#endif /* HW_PHASE_H */ diff --git a/examples/lpc2378/hw/hw_sd.h b/examples/lpc2378/hw/hw_sd.h deleted file mode 100644 index 79759ae9..00000000 --- a/examples/lpc2378/hw/hw_sd.h +++ /dev/null @@ -1,53 +0,0 @@ -/** - * \file - * - * - * \brief SD driver hardware-specific definitions. - * - * \version $Id: hw_sd.h 2834 2009-08-31 18:11:02Z batt $ - * - * \author Luca Ottaviano - */ - -#ifndef HW_SD_H -#define HW_SD_H - -#warning FIXME: This is an example implementation, you must implement it - -#define SD_CS_INIT() do { /* implement me */} while(0) -#define SD_CS_ON() do { /* implement me */} while(0) -#define SD_CS_OFF() do { /* implement me */} while(0) - -#define SD_PIN_INIT() do { /* implement me */} while(0) -#define SD_CARD_PRESENT() true /* implement me */ -#define SD_WRITE_PROTECT() false /* implement me */ - -#endif /* HW_SD_H */ diff --git a/examples/lpc2378/hw/hw_ser.h b/examples/lpc2378/hw/hw_ser.h deleted file mode 100644 index 634c44bc..00000000 --- a/examples/lpc2378/hw/hw_ser.h +++ /dev/null @@ -1,53 +0,0 @@ -/** - * \file - * - * - * \brief Serial hardware-specific definitions - * - * \version $Id: hw_ser.h 2883 2009-09-04 19:46:02Z batt $ - * - * \author Daniele Basile - */ - -#ifndef HW_SER_H -#define HW_SER_H - -#include "cfg/cfg_ser.h" - -#if CONFIG_SER_STROBE - #warning FIXME: this is an example implementation, you must implement it - - #define SER_STROBE_INIT do { /* implement me */ } while (0) - #define SER_STROBE_ON do { /* implement me */ } while (0) - #define SER_STROBE_OFF do { /* implement me */ } while (0) -#endif - -#endif /* HW_SER_H */ diff --git a/examples/lpc2378/hw/hw_sipo.h b/examples/lpc2378/hw/hw_sipo.h deleted file mode 100644 index b4fba473..00000000 --- a/examples/lpc2378/hw/hw_sipo.h +++ /dev/null @@ -1,109 +0,0 @@ -/** - * \file - * - * - * \brief Macro for HW_SIPO_H - * - * - * \version $Id: hw_sipo.h 2882 2009-09-04 19:17:37Z batt $ - * - * \author Andrea Grandi - * \author Daniele Basile - */ - -#ifndef HW_SIPO_H -#define HW_SIPO_H - -/** - * Map sipo connection on board. - */ -typedef enum SipoMap -{ - SIPO_CNT -} SipoMap; - -/** - * Define generic macro to set pins logic level - */ -#define SIPO_SET_LEVEL_LOW(dev) do { /* Implement me! */ } while (0) -#define SIPO_SET_LEVEL_HIGH(dev) do { /* Implement me! */ } while (0) - - -/** - * Generate one low pulse on select line. - */ -#define PULSE_LOW(dev) do { /* Implement me! */ } while (0) - -/** - * Generate one hight pulse on select line. - */ -#define PULSE_HIGH(dev) do { /* Implement me! */ } while (0) - - -/** - * Define the procedure to drive serial input in sipo device (SI). - */ -#define SIPO_SI_HIGH() do { /* Implement me! */ } while (0) -#define SIPO_SI_LOW() do { /* Implement me! */ } while (0) - -/** - * Drive clock to shift SI data into latch. - */ -#define SIPO_SI_CLOCK(clk_pol) \ - do { \ - (void)clk_pol; \ - /* Implement me! */ \ - } while (0) - -/** - * Do everything needed in order to load dato into sipo. - */ -#define SIPO_LOAD(device, load_pol) do { /* Implement me! */ } while (0) - -/** - * Enable the shift register output. - */ -#define SIPO_ENABLE() do { /* Implement me! */ } while (0) - -/** - * Set polarity for Load, Clk, SI signals. - */ -#define SIPO_SET_LD_LEVEL(device, load_pol) do { /* Implement me! */ } while (0) -#define SIPO_SET_CLK_LEVEL(clock_pol) do { /* Implement me! */ } while (0) -#define SIPO_SET_SI_LEVEL() do { /* Implement me! */ } while (0) - -/** - * Do anything that needed to init sipo pins. - */ -#define SIPO_INIT_PIN() do { /* Implement me! */ } while (0) - -#endif /* HW_SIPO_H */ diff --git a/examples/lpc2378/hw/hw_spi.h b/examples/lpc2378/hw/hw_spi.h deleted file mode 100644 index b9436620..00000000 --- a/examples/lpc2378/hw/hw_spi.h +++ /dev/null @@ -1,115 +0,0 @@ -/** - * \file - * - * - * \brief Hardware macro definition. - * - * - * \version $Id: hw_spi.h 1357 2008-05-26 09:30:19Z asterix $ - * \author Daniele Basile - */ - -#ifndef HW_SPI_H -#define HW_SPI_H - -#warning TODO:This is an example implentation, you must implement it! - -#include - -/** - * SPI pin definition. - * - * \note CS is assert when level - * is low. - * - * \{ - */ -#define CS /* pin */ ///Connect to CS pin of Flash memory. -#define SCK /* pin */ ///Connect to SCK pin of Flash memory. -#define MOSI /* pin */ ///Connect to SI pin of Flash memory. -#define MISO /* pin */ ///Connect to SO pin of Flash memory. -#define SPI_PORT /* pin */ ///Micro pin PORT register. -#define SPI_PIN /* pin */ ///Micro pin PIN register. -#define SPI_DDR /* pin */ ///Micro pin DDR register. -/*\}*/ - -/** - * Pin logic level. - * - * \{ - */ -#define MOSI_LOW() do { /* Implement me! */ } while(0) -#define MOSI_HIGH() do { /* Implement me! */ } while(0) -#define MISO_HIGH() do { /* Implement me! */ } while(0) -#define SCK_LOW() do { /* Implement me! */ } while(0) -#define SCK_HIGH() do { /* Implement me! */ } while(0) -#define CS_LOW() do { /* Implement me! */ } while(0) -#define CS_HIGH() do { /* Implement me! */ } while(0) -/*\}*/ - -/** - * SPI pin commands. - * - * \{ - */ -#define CS_ENABLE() CS_LOW() -#define CS_DISABLE() CS_HIGH() -#define SS_ACTIVE() CS_LOW() -#define SS_INACTIVE() CS_HIGH() -#define SCK_INACTIVE() SCK_LOW() -#define SCK_ACTIVE() SCK_HIGH() -#define CS_OUT() do { /* Implement me! */ } while(0) -#define MOSI_IN() do { /* Implement me! */ } while(0) -#define MOSI_OUT() do { /* Implement me! */ } while(0) -#define IS_MISO_HIGH() (false /* Implement me! */ ) -#define MISO_IN() do { /* Implement me! */ } while(0) -#define MISO_OUT() do { /* Implement me! */ } while(0) -#define SCK_OUT() do { /* Implement me! */ } while(0) - -#define SCK_PULSE()\ - do {\ - SCK_HIGH();\ - SCK_LOW();\ - } while (0) -/*\}*/ - - -#define SPI_HW_INIT() \ - CS_DISABLE();\ - MOSI_LOW();\ - SCK_LOW();\ - MISO_IN();\ - MOSI_OUT();\ - SCK_OUT();\ - CS_OUT(); - -#endif /* HW_SPI_H */ - diff --git a/examples/lpc2378/hw/hw_stepper.h b/examples/lpc2378/hw/hw_stepper.h deleted file mode 100644 index 563a9aa1..00000000 --- a/examples/lpc2378/hw/hw_stepper.h +++ /dev/null @@ -1,309 +0,0 @@ -/** - * \file - * - * - * \brief Stepper hardware-specific definitions - * - * \version $Id: hw_stepper.h 2488 2009-04-10 17:52:12Z batt $ - * - * \author Daniele Basile - */ - - -#ifndef HW_STEPPER_H -#define HW_STEPPER_H - -#include - -#include - -#include - -#warning TODO:This is an example implentation, you must implement it! - -#define STEPPER_STROBE_INIT \ -do { \ - /* put init code for strobe */ \ -} while (0) - - -#define STEPPER_STROBE_ON do { /* Implement me! */ } while(0) -#define STEPPER_STROBE_OFF do { /* Implement me! */ } while(0) - -/** - * CPU clock frequency is divided by 2^STEPPER_PRESCALER_LOG2 to - * obtain stepper clock. - */ -#define STEPPER_PRESCALER_LOG2 1 - -/** - * Stepper timer clock frequency. - */ -#define STEPPER_CLOCK ((CPU_FREQ) >> STEPPER_PRESCALER_LOG2) - -/** - * us delay to reset a stepper motor. - * This is the time neccessary to reset - * the stepper controll chip. (see datasheet for more detail). - */ -#define STEPPER_RESET_DELAY 1 - -/* - * Pins define for each stepper - */ -#define STEPPER_1_CW_CCW_PIN 0 -#define STEPPER_1_HALF_FULL_PIN 0 -#define STEPPER_1_CONTROL_PIN 0 -#define STEPPER_1_ENABLE_PIN 0 -#define STEPPER_1_RESET_PIN 0 - -/* put here other stepper motor */ - -#define STEPPER_1_SET do { /* Implement me! */ } while(0) -/* add here the set for other stepper motor */ - -#define STEPPER_1_CLEAR do { /* Implement me! */ } while(0) -/* add here the clear for other stepper motor */ - -/* - * Generic macro definition - */ - -/* - * Stepper init macro - */ -#define STEPPER_PIN_INIT_MACRO(port, index) do { \ - /* Add here init pin code */ \ - } while (0) - -/* - * Stepper commands macros - */ -#define STEPPER_SET_CW(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_CCW(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_HALF(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_FULL(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_CONTROL_LOW(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_CONTROL_HIGHT(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_ENABLE(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_DISABLE(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_RESET_ENABLE(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_RESET_DISABLE(index) do { /* Implement me! */ } while (0) - - -/* - * Reset stepper macro - */ - -#define STEPPER_RESET_MACRO(index) do { \ - STEPPER_SET_RESET_ENABLE(index); \ - timer_udelay(STEPPER_RESET_DELAY); \ - STEPPER_SET_RESET_DISABLE(index); \ - } while (0) - -/* - * Set half or full step macro - */ -#define STEPPER_SET_STEP_MODE_MACRO(index, flag) do { \ - if (flag) \ - STEPPER_SET_HALF(index); \ - else \ - STEPPER_SET_FULL(index); \ - } while (0) - -/* - * Set control status macro - */ -#warning TODO: This macro is not implemented (see below) - -#define STEPPER_SET_CONTROL_BIT_MACRO(index, flag) do { \ - /* if (flag) */ \ - /* WARNING This macros not implemented */ \ - /* else */ \ - /* WARNING This macros not implemented */ \ - } while (0) - -/* - * Set current power macro - */ -#warning TODO: This macro is not implemented (see below) - -#define STEPPER_SET_POWER_CURRENT_MACRO(index, flag) do { \ - /* if (flag) */ \ - /* WARNING This macrois not implemented */ \ - /* else */ \ - /* WARNING This macrois not implemented */ \ - } while (0) - -/* - * Set rotation of stepper motor - * - dir = 1: positive rotation - * - dir = 0: no motor moviment - * - dir = -1: negative rotation - * - */ -#define STEPPER_SET_DIRECTION_MACRO(index, dir) do { \ - switch (dir) \ - { \ - case 1: \ - STEPPER_SET_CW(index); \ - break; \ - case -1: \ - STEPPER_SET_CCW(index); \ - break; \ - case 0: \ - break; \ - } \ - } while (0) - - -/* - * Define macros for manage low level of stepper. - */ - -#define STEPPER_INIT() do { \ - STEPPER_PIN_INIT_MACRO(A, 1); \ - /* Add here code for other stepper motor */ \ - } while (0) - - -/* - * Enable select stepper motor - */ -#define STEPPER_ENABLE(index) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_ENABLE(1); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - -/* - * Enable all stepper connect to micro - */ -#define STEPPER_ENABLE_ALL() do { \ - STEPPER_SET_ENABLE(1); \ - /* Add here code for other stepper motor */ \ - } while (0) - -/* - * Disable select stepper motor - */ -#define STEPPER_DISABLE(index) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_DISABLE(1); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - -/* - * Disable all stepper connect to micro - */ -#define STEPPER_DISABLE_ALL() do { \ - STEPPER_SET_DISABLE(1); \ - /* Add here code for other stepper motor */ \ - } while (0) - -/* - * Reset selected stepper motor - */ -#define STEPPER_RESET(index) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_RESET_MACRO(1); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - -/* - * Reset all stepper motor - */ -#define STEPPER_RESET_ALL() do { \ - STEPPER_RESET_MACRO(1) \ - /* Add here code for other stepper motor */ \ - } while (0) - -// Set half/full step macros -#define STEPPER_SET_HALF_STEP(index, flag) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_STEP_MODE_MACRO(1, flag); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - - -// Control status -#define STEPPER_SET_CONTROL_BIT(index, flag) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_CONTROL_BIT_MACRO(1, flag); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - - -// Set stepper power current -#define STEPPER_SET_POWER_CURRENT(index, flag) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_POWER_CURRENT_MACRO(1, flag); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - -// Set rotation dirction of stepper motor -#define STEPPER_SET_DIRECTION(index, dir) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_DIRECTION_MACRO(1, dir); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - -#endif /* HW_STEPPER_H */ - - diff --git a/examples/lpc2378/hw/hw_tas5706a.h b/examples/lpc2378/hw/hw_tas5706a.h deleted file mode 100644 index f8cbf353..00000000 --- a/examples/lpc2378/hw/hw_tas5706a.h +++ /dev/null @@ -1,65 +0,0 @@ -/** - * \file - * - * - * \brief HW pin handling. - * - * \version $Id: hw_tas5706a.h 2849 2009-09-01 15:46:14Z lottaviano $ - * - * \author Francesco Sacchi - */ - -#ifndef HW_TAS5706A_H -#define HW_TAS5706A_H - -#include - -#warning FIXME: This is an example implementation, you must implement it - -#define TAS5706A_SETPOWERDOWN(val) do { (void) val; /* implement me */ } while (0) -#define TAS5706A_SETRESET(val) do { (void) val; /* implement me */ } while (0) -#define TAS5706A_SETMUTE(val) do { (void) val; /* implement me */ } while (0) - -#define TAS5706A_PIN_INIT() \ - do { \ - TAS5706A_SETPOWERDOWN(true); \ - TAS5706A_SETRESET(true); \ - TAS5706A_SETMUTE(true); \ - /* complete me */ \ - } while (0) - -#define TAS5706A_MCLK_INIT() \ - do { \ - /* implement me */ \ - } while(0) - - -#endif /* HW_TAS5706A_H */ diff --git a/examples/lpc2378/hw/hw_thermo.h b/examples/lpc2378/hw/hw_thermo.h deleted file mode 100644 index de5edcc7..00000000 --- a/examples/lpc2378/hw/hw_thermo.h +++ /dev/null @@ -1,182 +0,0 @@ -/** - * \file - * - * - * \brief thermo hardware-specific control functions. - * - * \version $Id: hw_thermo.h 1440 2008-06-10 17:59:13Z asterix $ - * \author Francesco Sacchi - * - */ - -#ifndef HW_THERMO_H -#define HW_THERMO_H - -#include "thermo_map.h" -#include "ntc_map.h" - -#include -#include - -#include -#include - -#warning TODO:This is an example implentation, you must implement it! - -/*! - * This function should return the temperature set tolerance. - */ -INLINE deg_t thermo_hw_tolerance(ThermoDev dev) -{ - ASSERT(dev < THERMO_CNT); - - switch (dev) - { - case THERMO_TEST: - /* Put here convertion function to temperature size */ - break; - - /* Put here your thermo device */ - - default: - ASSERT(0); - } - - return 0; -} - - -/*! - * This function should return the timeout for reaching the - * target temperature. - */ -INLINE ticks_t thermo_hw_timeout(ThermoDev dev) -{ - ASSERT(dev < THERMO_CNT); - - switch (dev) - { - case THERMO_TEST: - /* return ms_to_ticks(60000); */ - break; - - /* Put here a time out for select thermo device */ - - default: - ASSERT(0); - } - - return 0; -} - - - -/*! - * Read the temperature of the hw device \a dev. - */ -INLINE deg_t thermo_hw_read(ThermoDev dev) -{ - return ntc_read(dev); -} - - -/*! - * Turns off a specific device. - * This function is usefull to handle errors. - */ -INLINE void thermo_hw_off(ThermoDev dev) -{ - ASSERT(dev < THERMO_CNT); - - switch (dev) - { - case THERMO_TEST: - phase_setPower(TRIAC_TEST, 0); - break; - - /* Put here a thermo device to turn off */ - - default: - ASSERT(0); - } - -} - - -/*! - * Based on the current temperature \a cur_temp and the target temperature \a target, this function turns on and off specific - * triac channel and handles the freezer alarm. - * It may use also PID control for thermo-regolations. - */ -INLINE void thermo_hw_set(ThermoDev dev, deg_t target, deg_t cur_temp) -{ - ASSERT(dev < THERMO_CNT); - - deg_t dist = target - cur_temp; - //kprintf("dev[%d], dist[%d]\n", dev, dist); - - switch(dev) - { - case THERMO_TEST: - if (dist > 0) - { - /* phase_setPower(TRIAC_TEST, dist * PID_TEST_K); */ - } - else - { - /* phase_setPower(TRIAC_TEST, 0); */ - } - break; - - /* Put here an other thermo device */ - - default: - ASSERT(0); - } -} - - -#define THERMO_HW_INIT _thermo_hw_init() - -/*! - * Init hw associated with thermo-control. - */ -INLINE void _thermo_hw_init(void) -{ - ASSERT(phase_initialized); - ASSERT(ntc_initialized); - - phase_setPower(TRIAC_TEST, 0); - - /* Add here the other thermo device */ -} - -#endif /* HW_THERMO_H */ diff --git a/examples/lpc2378/hw/hw_tlv5618.h b/examples/lpc2378/hw/hw_tlv5618.h deleted file mode 100644 index 4a2b4202..00000000 --- a/examples/lpc2378/hw/hw_tlv5618.h +++ /dev/null @@ -1,69 +0,0 @@ -/** - * \file - * - * - * \brief TLV5816 DAC hardware-specific definitions - * - * - * \author Francesco Sacchi - */ - -#ifndef HW_TLV5816_H -#define HW_TLV5816_H - -#warning TODO:This is an example implementation, you must implement it! - -#define TLV5618_CSINIT(pin) \ -do \ -{ \ - (void)pin; \ - /* Implement me! */ \ - TLV5618_CSHIGH(pin); \ -} while(0) - -#define TLV5618_CSLOW(pin) \ -do \ -{ \ - (void)pin; \ - /* Implement me! */ \ -} while(0) - - -#define TLV5618_CSHIGH(pin) \ -do \ -{ \ - (void)pin; \ - /* Implement me! */ \ -} while(0) - - -#endif /* HW_TLV5816_H */ - diff --git a/examples/lpc2378/hw/hw_tmp123.h b/examples/lpc2378/hw/hw_tmp123.h deleted file mode 100644 index adb18588..00000000 --- a/examples/lpc2378/hw/hw_tmp123.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - * \file - * - * - * \brief Hardware macro definition. - * - * \author Daniele Basile - */ - -#ifndef HW_TMP123_H -#define HW_TMP123_H - -#warning TODO:This is an example implentation, you must implement it! - -#define TMP123_HW_CS_EN() /* Implement me! */ -#define TMP123_HW_CS_DIS() /* Implement me! */ - -#define TMP123_HW_INIT() \ - do { \ - /* Pin init */\ - } while (0) - -#endif /* HW_TMP123_H */ - diff --git a/examples/lpc2378/hw/kbd_map.h b/examples/lpc2378/hw/kbd_map.h deleted file mode 100644 index 07515c0a..00000000 --- a/examples/lpc2378/hw/kbd_map.h +++ /dev/null @@ -1,71 +0,0 @@ -/** - * \file - * - * - * \brief Keyboard map definitions. - * - * \version $Id: kbd_map.h 2848 2009-09-01 15:23:57Z lottaviano $ - * - * \author Francesco Sacchi - * \author Stefano Fedrigo - */ - -#ifndef HW_KBD_MAP_H -#define HW_KBD_MAP_H - -#include - -#warning TODO:This is an example implentation, you must implement it! - - -/** - * Type for keyboard mask. - */ -typedef uint16_t keymask_t; - -/** - * \name Keycodes. - */ -/*@{*/ -#define K_UP BV(0) -#define K_DOWN BV(1) -#define K_OK BV(2) -#define K_CANCEL BV(3) - -#define K_REPEAT BV(13) /**< This is a repeated keyevent. */ -#define K_TIMEOUT BV(14) /**< Fake key event for timeouts. */ -#define K_LONG BV(15) -/*@}*/ - -#define K_LNG_MASK 0 - -#endif /* HW_KBD_MAP_H */ diff --git a/examples/lpc2378/hw/mcp41_map.h b/examples/lpc2378/hw/mcp41_map.h deleted file mode 100644 index 544f5673..00000000 --- a/examples/lpc2378/hw/mcp41_map.h +++ /dev/null @@ -1,59 +0,0 @@ -/** - * \file - * - * - * \brief MCP41 digital potentiometer map definitions. - * - * \version $Id: mcp41_map.h 2506 2009-04-15 08:29:07Z duplo $ - * - * \author Francesco Sacchi - */ - -#ifndef MCP41_MAP_H -#define MCP41_MAP_H - -#warning TODO:This is an example implentation, you must implement it! - -/** \name Enum for mcp41 pot evices. - * \{ - * - */ -typedef enum Mcp41Dev -{ - MCP41_LED, - - /* put here other mcp41 device */ - - MCP41_CNT, -} Mcp41Dev; -/* \} */ - -#endif /* MCP41_MAP_H */ diff --git a/examples/lpc2378/hw/ntc_map.h b/examples/lpc2378/hw/ntc_map.h deleted file mode 100644 index 00997ce6..00000000 --- a/examples/lpc2378/hw/ntc_map.h +++ /dev/null @@ -1,61 +0,0 @@ -/** - * \file - * - * - * \brief NTC map definitions. - * - * \version $Id: ntc_map.h 1312 2008-05-20 16:54:52Z asterix $ - * - * \author Giovanni Bajo - * \author Francesco Sacchi - */ - -#ifndef NTC_MAP_H -#define NTC_MAP_H - -#include - -#warning TODO:This is an example implentation, you must implement it! - -/*! \name Enum for ntc devices. - * \{ - */ -typedef enum NtcDev -{ - NTC_TEST, - - /* Put here your thermo device */ - - NTC_CNT -} NtcDev; -/* \} */ - -#endif /* NTC_MAP_H */ diff --git a/examples/lpc2378/hw/phase_map.h b/examples/lpc2378/hw/phase_map.h deleted file mode 100644 index 2f338cdb..00000000 --- a/examples/lpc2378/hw/phase_map.h +++ /dev/null @@ -1,58 +0,0 @@ -/** - * \file - * - * - * \brief Triac map definitions. - * - * \version $Id: phase_map.h 1357 2008-05-26 09:30:19Z asterix $ - * - * \author Francesco Sacchi - */ - -#ifndef PHASE_MAP_H -#define PHASE_MAP_H - -#warning TODO:This is an example implentation, you must implement it! - -/*! \name Enum for triac devices. - * \{ - */ -typedef enum TriacDev -{ - TRIAC_TEST, - - /* Put here other triac device */ - - TRIAC_CNT -} TriacDev; -/* \} */ - -#endif /* PHASE_MAP_H */ diff --git a/examples/lpc2378/hw/pwm_map.h b/examples/lpc2378/hw/pwm_map.h deleted file mode 100644 index 8f9f8b65..00000000 --- a/examples/lpc2378/hw/pwm_map.h +++ /dev/null @@ -1,61 +0,0 @@ -/** - * \file - * - * - * - * \brief PWM map device. - * - * \version $Id: pwm_map.h 1357 2008-05-26 09:30:19Z asterix $ - * - * \author Daniele Basile - */ - -#ifndef HW_PWM_MAP_H -#define HW_PWM_MAP_H - -#warning TODO:This is an example implentation, you must implement it! - -typedef enum -{ - PWM_CH0 = 0, - PWM_CH1, - PWM_CH2, - PWM_CH3, - -/* - * add other PWM channel or - * change above. - */ - - PWM_CNT -} PwmDev; - -#endif /* HW_PWM_MAP_H */ diff --git a/examples/lpc2378/hw/thermo_map.h b/examples/lpc2378/hw/thermo_map.h deleted file mode 100644 index 5973612b..00000000 --- a/examples/lpc2378/hw/thermo_map.h +++ /dev/null @@ -1,70 +0,0 @@ -/** - * \file - * - * - * \brief Thermo regulation control map definitions. - * - * \version $Id: thermo_map.h 1312 2008-05-20 16:54:52Z asterix $ - * - * \author Francesco Sacchi - */ - -#ifndef THERMO_MAP_H -#define THERMO_MAP_H - -#include -#include - -#warning TODO:This is an example implentation, you must implement it! - -typedef uint8_t thermostatus_t; - -#define THERMO_OFF 0 -#define THERMO_HEATING BV(0) -#define THERMO_FREEZING BV(1) -#define THERMO_TGT_REACH BV(2) -#define THERMOERRF_NTCSHORT BV(3) -#define THERMOERRF_NTCOPEN BV(4) -#define THERMOERRF_TIMEOUT BV(5) -#define THERMO_ACTIVE BV(6) - -#define THERMO_ERRMASK (THERMOERRF_NTCSHORT | THERMOERRF_NTCOPEN | THERMOERRF_TIMEOUT) - -typedef enum ThermoDev -{ - THERMO_TEST, - - /* Put here your thermo device */ - - THERMO_CNT, -} ThermoDev; - -#endif /* THERMO_MAP_H */ diff --git a/examples/lpc2378/lpc2378.mk b/examples/lpc2378/lpc2378.mk deleted file mode 100644 index 45a25e9c..00000000 --- a/examples/lpc2378/lpc2378.mk +++ /dev/null @@ -1,65 +0,0 @@ -# -# Copyright 2009 Develer S.r.l. (http://www.develer.com/) -# All rights reserved. -# -# Makefile template for BeRTOS wizard. -# -# Author: Lorenzo Berni -# -# - -# Programmer interface configuration, see http://dev.bertos.org/wiki/ProgrammerInterface for help -lpc2378_PROGRAMMER_TYPE = jtag-tiny -lpc2378_PROGRAMMER_PORT = none - -# Files included by the user. -lpc2378_USER_CSRC = \ - examples/lpc2378/main.c \ - bertos/drv/timer.c \ - bertos/drv/timer_test.c \ - bertos/drv/ser.c \ - bertos/cpu/arm/drv/ser_lpc2.c \ - bertos/cpu/arm/drv/vic_lpc2.c \ - bertos/cpu/arm/drv/timer_lpc2.c \ - bertos/mware/event.c \ - bertos/kern/kfile.c \ - bertos/kern/proc.c \ - bertos/kern/proc_test.c \ - bertos/kern/monitor.c \ - bertos/mware/sprintf.c \ - bertos/struct/heap.c \ - # - -# Files included by the user. -lpc2378_USER_PCSRC = \ - # - -# Files included by the user. -lpc2378_USER_CPPASRC = \ - bertos/cpu/arm/hw/switch_ctx_arm.S \ - # - -# Files included by the user. -lpc2378_USER_CXXSRC = \ - # - -# Files included by the user. -lpc2378_USER_ASRC = \ - # - -# Flags included by the user. -lpc2378_USER_LDFLAGS = \ - # - -# Flags included by the user. -lpc2378_USER_CPPAFLAGS = \ - # - -# Flags included by the user. -lpc2378_USER_CPPFLAGS = \ - -fno-strict-aliasing \ - -fwrapv \ - # - -# Include the mk file generated by the wizard -include examples/lpc2378/lpc2378_wiz.mk diff --git a/examples/lpc2378/lpc2378_wiz.mk b/examples/lpc2378/lpc2378_wiz.mk deleted file mode 100644 index f92dab6f..00000000 --- a/examples/lpc2378/lpc2378_wiz.mk +++ /dev/null @@ -1,82 +0,0 @@ -# -# Copyright 2009 Develer S.r.l. (http://www.develer.com/) -# All rights reserved. -# -# Makefile template for BeRTOS wizard. -# -# Author: Lorenzo Berni -# -# - -# Constants automatically defined by the selected modules -lpc2378_DEBUG = 1 - -# Our target application -TRG += lpc2378 - -lpc2378_PREFIX = "arm-none-eabi-" - -lpc2378_SUFFIX = "" - -# Files automatically generated by the wizard. DO NOT EDIT, USE lpc2378_USER_CSRC INSTEAD! -lpc2378_WIZARD_CSRC = \ - bertos/mware/hex.c \ - bertos/mware/formatwr.c \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE lpc2378_USER_PCSRC INSTEAD! -lpc2378_WIZARD_PCSRC = \ - \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE lpc2378_USER_CPPASRC INSTEAD! -lpc2378_WIZARD_CPPASRC = \ - \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE lpc2378_USER_CXXSRC INSTEAD! -lpc2378_WIZARD_CXXSRC = \ - \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE lpc2378_USER_ASRC INSTEAD! -lpc2378_WIZARD_ASRC = \ - \ - # - -lpc2378_CPPFLAGS = -D'CPU_FREQ=(72000000UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -Iexamples/lpc2378/ $(lpc2378_CPU_CPPFLAGS) $(lpc2378_USER_CPPFLAGS) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -lpc2378_LDFLAGS = $(lpc2378_CPU_LDFLAGS) $(lpc2378_WIZARD_LDFLAGS) $(lpc2378_USER_LDFLAGS) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -lpc2378_CPPAFLAGS = $(lpc2378_CPU_CPPAFLAGS) $(lpc2378_WIZARD_CPPAFLAGS) $(lpc2378_USER_CPPAFLAGS) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -lpc2378_CSRC = $(lpc2378_CPU_CSRC) $(lpc2378_WIZARD_CSRC) $(lpc2378_USER_CSRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -lpc2378_PCSRC = $(lpc2378_CPU_PCSRC) $(lpc2378_WIZARD_PCSRC) $(lpc2378_USER_PCSRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -lpc2378_CPPASRC = $(lpc2378_CPU_CPPASRC) $(lpc2378_WIZARD_CPPASRC) $(lpc2378_USER_CPPASRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -lpc2378_CXXSRC = $(lpc2378_CPU_CXXSRC) $(lpc2378_WIZARD_CXXSRC) $(lpc2378_USER_CXXSRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -lpc2378_ASRC = $(lpc2378_CPU_ASRC) $(lpc2378_WIZARD_ASRC) $(lpc2378_USER_ASRC) - -# CPU specific flags and options, defined in the CPU definition files. -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -lpc2378_CPU_CPPASRC = bertos/cpu/arm/hw/crt_arm7tdmi.S bertos/cpu/arm/hw/vectors_lpc2.S -lpc2378_CPU_CPPAFLAGS = -g -gdwarf-2 -lpc2378_CPU_CPPFLAGS = -O0 -g3 -gdwarf-2 -fverbose-asm -Ibertos/cpu/arm/ -D__ARM_LPC2378__ -lpc2378_CPU_CSRC = bertos/cpu/arm/hw/init_lpc2.c -lpc2378_PROGRAMMER_CPU = lpc2378 -lpc2378_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh -lpc2378_CPU = arm7tdmi -lpc2378_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh -lpc2378_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh -lpc2378_CPU_LDFLAGS = -nostartfiles -Wl,--no-warn-mismatch -T bertos/cpu/arm/scripts/lpc2378.ld -lpc2378_FLASH_SCRIPT = bertos/prg_scripts/arm/flash.sh diff --git a/examples/lpc2378/main.c b/examples/lpc2378/main.c deleted file mode 100644 index ef67627e..00000000 --- a/examples/lpc2378/main.c +++ /dev/null @@ -1,91 +0,0 @@ -// Emtpy main.c file generated by the wizard -#include -#include -#include -#include -#include -#include "hw/hw_led.h" - -#define PRIO_HIGH 1 -#define PRIO_LOW 0 - -static Serial ser_port; - -static void init(void) -{ - IRQ_ENABLE; - kdbg_init(); - timer_init(); - proc_init(); - - timer_delay(3000); - kprintf("NXP LPC2378 BeRTOS port test\n"); - timer_delay(3000); - /* Turn off boot led */ - IODIR0 = (1<<21); - IOCLR0 = (1<<21); - /* Init status led */ - LED_INIT(); - LED_OFF(); -} - -static void NORETURN ser_prompt(void) -{ - char buf[32]; - int i; - - ser_init(&ser_port, SER_UART1); - ser_setbaudrate(&ser_port, 115200); - - /* BeRTOS "echo" terminal */ - kfile_printf(&ser_port.fd, "\n\rBeRTOS echo terminal\n\r"); - proc_setPri(proc_current(), PRIO_HIGH); - for (i = 0; ; i++) - { - kfile_printf(&ser_port.fd, "\n\r[%03d] BeRTOS:~$ ", i); - kfile_gets_echo(&ser_port.fd, buf, sizeof(buf), true); - kfile_printf(&ser_port.fd, "%s", buf); - } -} - -static void NORETURN bertos_up(void) -{ - char spinner[] = {'/', '-', '\\', '|'}; - int i = 0; - while (1) - { - i++; - proc_forbid(); - kprintf("BeRTOS is up & running: %c\r", - spinner[i % countof(spinner)]); - proc_permit(); - timer_delay(100); - } -} - -static void NORETURN status(void) -{ - while (1) - { - LED_ON(); - timer_delay(250); - - LED_OFF(); - timer_delay(250); - } -} - -int main(void) -{ - - init(); - proc_testRun(); - proc_new(bertos_up, NULL, KERN_MINSTACKSIZE * 3, NULL); - proc_new(ser_prompt, NULL, KERN_MINSTACKSIZE * 3, NULL); - proc_new(status, NULL, 0, NULL); - while (1) - { - } - - return 0; -} diff --git a/examples/stm32p103/cfg/cfg_debug.h b/examples/stm32p103/cfg/cfg_debug.h deleted file mode 100644 index 20fec2d3..00000000 --- a/examples/stm32p103/cfg/cfg_debug.h +++ /dev/null @@ -1,53 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for Debug module. - * - * \author Daniele Basile - */ - -#ifndef CFG_DEBUG_H -#define CFG_DEBUG_H - -/** - * Debug console port. - * $WIZ$ type = "int"; min = 0 - */ -#define CONFIG_KDEBUG_PORT 1 - -/** - * Baudrate for the debug console. - * $WIZ$ type = "int"; min = 300 - */ -#define CONFIG_KDEBUG_BAUDRATE 115200UL - -#endif /* CFG_DEBUG_H */ diff --git a/examples/stm32p103/cfg/cfg_gfx.h b/examples/stm32p103/cfg/cfg_gfx.h deleted file mode 100644 index 8d8b6fa2..00000000 --- a/examples/stm32p103/cfg/cfg_gfx.h +++ /dev/null @@ -1,74 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for GFX module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_GFX_H -#define CFG_GFX_H - -/// Enable line clipping algorithm. -#define CONFIG_GFX_CLIPPING 1 - -/// Enable text rendering in bitmaps. -#define CONFIG_GFX_TEXT 1 - -/// Enable virtual coordinate system. -#define CONFIG_GFX_VCOORDS 1 - -/// Select bitmap pixel format. -#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB - - -#define CONFIG_CHART_TYPE_X uint8_t ///< Type for the chart dataset -#define CONFIG_CHART_TYPE_Y uint8_t ///< Type for the chart dataset - - -/// Enable button bar behind menus -#define CONFIG_MENU_MENUBAR 0 - -/// Level Edit Timeout -#define CONFIG_LEVELEDIT_TIMEOUT 0 - -/// Menu timeout -#define CONFIG_MENU_TIMEOUT 0 - -/// Enable smooth scrolling in menus -#define CONFIG_MENU_SMOOTH 1 - - -#endif /* CFG_GFX_H */ - diff --git a/examples/stm32p103/cfg/cfg_heap.h b/examples/stm32p103/cfg/cfg_heap.h deleted file mode 100644 index 7d080012..00000000 --- a/examples/stm32p103/cfg/cfg_heap.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for heap module. - * - * \author Daniele Basile - */ - -#ifndef CFG_HEAP_H -#define CFG_HEAP_H - -/** - * Enable malloc/free like API. - * $WIZ$ type = "boolean" - */ -#define CONFIG_HEAP_MALLOC 1 - -#endif /* CFG_HEAP_H */ - - diff --git a/examples/stm32p103/cfg/cfg_kfile.h b/examples/stm32p103/cfg/cfg_kfile.h deleted file mode 100644 index 1b1989c9..00000000 --- a/examples/stm32p103/cfg/cfg_kfile.h +++ /dev/null @@ -1,62 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for KFile interface module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_KFILE_H -#define CFG_KFILE_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KFILE_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KFILE_LOG_FORMAT LOG_FMT_TERSE - -/** - * Enable the gets function with echo. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KFILE_GETS 1 - -#endif /* CFG_KFILE_H */ diff --git a/examples/stm32p103/cfg/cfg_lcd.h b/examples/stm32p103/cfg/cfg_lcd.h deleted file mode 100644 index d48fa5df..00000000 --- a/examples/stm32p103/cfg/cfg_lcd.h +++ /dev/null @@ -1,68 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for lcd display module. - */ - -#ifndef CFG_LCD_H -#define CFG_LCD_H - -/** - * Use 4 bit addressing mode. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_4BIT 0 - -/** - * Use a table to speed up LCD memory addressing. - * This will use about 100 bytes of RAM. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_ADDRESS_FAST 0 - -/** - * LCD setting for 32122A (AVR implementation). - * $WIZ$ type = "boolean" - * $WIZ$ supports = "avr and False" - */ -#define CONFIG_LCD_SOFTINT_REFRESH 0 - -/** - * LCD setting for 32122A (AVR implementation). - * $WIZ$ type = "boolean" - * $WIZ$ supports = "avr and False" - */ -#define CONFIG_LCD_WAIT 0 - - -#endif /* CFG_LCD_H */ - diff --git a/examples/stm32p103/cfg/cfg_monitor.h b/examples/stm32p103/cfg/cfg_monitor.h deleted file mode 100644 index d0e24da4..00000000 --- a/examples/stm32p103/cfg/cfg_monitor.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * \file - * - * - * \brief Kernel monitor configuration parameters - * - * \author Bernie Innocenti - */ - -#ifndef CFG_MONITOR_H -#define CFG_MONITOR_H - -/** - * Process monitor. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_MONITOR 1 - -#endif /* CFG_MONITOR_H */ diff --git a/examples/stm32p103/cfg/cfg_proc.h b/examples/stm32p103/cfg/cfg_proc.h deleted file mode 100644 index bff5d853..00000000 --- a/examples/stm32p103/cfg/cfg_proc.h +++ /dev/null @@ -1,107 +0,0 @@ -/** - * \file - * - * - * \brief Kernel configuration parameters - * - * \author Bernie Innocenti - */ - -#ifndef CFG_PROC_H -#define CFG_PROC_H - -/** - * Enable the multithreading kernel. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN 1 - -/** - * Kernel interrupt supervisor. WARNING: Experimental, still incomplete! - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_KERN_IRQ 0 - -/** - * Preemptive process scheduling. - * - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "timer" - */ -#define CONFIG_KERN_PREEMPT 1 - -/** - * Time sharing quantum (a prime number prevents interference effects) [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_KERN_QUANTUM 11 - -/** - * Priority-based scheduling policy. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_PRI 1 - -/** - * Dynamic memory allocation for processes. - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "heap" - */ -#define CONFIG_KERN_HEAP 1 - -/** - * Size of the dynamic memory pool used by processes. - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_KERN_HEAP_SIZE 8192L - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KERN_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KERN_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PROC_H */ diff --git a/examples/stm32p103/cfg/cfg_sem.h b/examples/stm32p103/cfg/cfg_sem.h deleted file mode 100644 index 51811da4..00000000 --- a/examples/stm32p103/cfg/cfg_sem.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * \file - * - * - * \brief Kernel semaphores configuration parameters. - * - * \author Bernie Innocenti - */ - -#ifndef CFG_SEM_H -#define CFG_SEM_H - -/** - * Re-entrant mutual exclusion primitives. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SEMAPHORES 0 - -#endif /* CFG_SEM_H */ diff --git a/examples/stm32p103/cfg/cfg_ser.h b/examples/stm32p103/cfg/cfg_ser.h deleted file mode 100644 index 91a10e0b..00000000 --- a/examples/stm32p103/cfg/cfg_ser.h +++ /dev/null @@ -1,222 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for serial module. - * - * \author Daniele Basile - */ - -#ifndef CFG_SER_H -#define CFG_SER_H - -/** - * Example of setting for serial port and - * spi port. - * Edit these define for your project. - */ - -/** - * Size of the outbound FIFO buffer for port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_UART0_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_UART0_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)" - */ -#define CONFIG_UART1_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)" - */ -#define CONFIG_UART1_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 2 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2" - */ -#define CONFIG_UART2_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 2 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2" - */ -#define CONFIG_UART2_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 3 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lpc2" - */ -#define CONFIG_UART3_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 3 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lpc2" - */ -#define CONFIG_UART3_RXBUFSIZE 32 - - -/** - * Size of the outbound FIFO buffer for SPI port [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for SPI port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI0_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI0_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for SPI port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI1_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI1_RXBUFSIZE 32 - -/** - * SPI data order. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_order_bit" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST - -/** - * SPI clock division factor. - * $WIZ$ type = "int" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_DIV 16 - -/** - * SPI clock polarity: normal low or normal high. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_spi_pol" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW - -/** - * SPI clock phase you can choose sample on first edge or - * sample on second clock edge. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_spi_phase" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE - -/** - * Default transmit timeout (ms). Set to -1 to disable timeout support. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_SER_TXTIMEOUT -1 - -/** - * Default receive timeout (ms). Set to -1 to disable timeout support. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_SER_RXTIMEOUT -1 - -/** - * Use RTS/CTS handshake. - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_SER_HWHANDSHAKE 0 - -/** - * Default baudrate for all serial ports (set to 0 to disable). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_SER_DEFBAUDRATE 0UL - -/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean" -#define CONFIG_SER_STROBE 0 - -#endif /* CFG_SER_H */ diff --git a/examples/stm32p103/cfg/cfg_signal.h b/examples/stm32p103/cfg/cfg_signal.h deleted file mode 100644 index ce5324ec..00000000 --- a/examples/stm32p103/cfg/cfg_signal.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * \file - * - * - * \brief Kernel signals configuration parameters - * - * \author Bernie Innocenti - */ - -#ifndef CFG_SIGNAL_H -#define CFG_SIGNAL_H - -/** - * Inter-process signals. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SIGNALS 1 - -#endif /* CFG_SIGNAL_H */ diff --git a/examples/stm32p103/cfg/cfg_timer.h b/examples/stm32p103/cfg/cfg_timer.h deleted file mode 100644 index ae1a60b9..00000000 --- a/examples/stm32p103/cfg/cfg_timer.h +++ /dev/null @@ -1,66 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for timer module. - * - * \author Daniele Basile - */ - -#ifndef CFG_TIMER_H -#define CFG_TIMER_H - -/** - * Hardware timer selection for drv/timer.c. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "timer_select" - */ -#define CONFIG_TIMER TIMER_DEFAULT - -/** - * Debug timer interrupt using a strobe pin. - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_STROBE 0 - -/** - * Enable asynchronous timers. - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_EVENTS 1 - -/** - * Support hi-res timer_usleep(). - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_UDELAY 1 - -#endif /* CFG_TIMER_H */ diff --git a/examples/stm32p103/main.c b/examples/stm32p103/main.c deleted file mode 100644 index 483852e2..00000000 --- a/examples/stm32p103/main.c +++ /dev/null @@ -1,82 +0,0 @@ -/** - * \file - * - * - * \brief STM32-P103 Cortex-M3 testcase - * - * \author Andrea Righi - */ - -#include "cfg/compiler.h" -#include -#include -#include -#include - -#define LED_PIN (1 << 12) - -static void led_init(void) -{ - /* Enable clocking on GPIOA and GPIOC */ - RCC->APB2ENR |= RCC_APB2_GPIOC; - /* Configure the LED pin as GPIO */ - stm32_gpioPinConfig((struct stm32_gpio *)GPIOC_BASE, - LED_PIN, GPIO_MODE_OUT_PP, GPIO_SPEED_50MHZ); -} - -static void NORETURN led_process(void) -{ - int i; - - for (i = 0; ; i = !i) - { - stm32_gpioPinWrite((struct stm32_gpio *)GPIOC_BASE, LED_PIN, i); - timer_delay(250); - } -} - -int main(void) -{ - int i; - - IRQ_ENABLE; - kdbg_init(); - timer_init(); - proc_init(); - led_init(); - - proc_new(led_process, NULL, KERN_MINSTACKSIZE, NULL); - for (i = 0; ; i = !i) - { - kputs("BeRTOS up & running!\n"); - timer_delay(500); - } -} diff --git a/examples/stm32p103/stm32p103.mk b/examples/stm32p103/stm32p103.mk deleted file mode 100644 index 555b9af4..00000000 --- a/examples/stm32p103/stm32p103.mk +++ /dev/null @@ -1,63 +0,0 @@ -# Copyright 2010 Develer S.r.l. (http://www.develer.com/) -# -# Makefile for the stm32p103 board example. -# -# Author: Andrea Righi - -# Set to 1 for debug builds -stm32p103_DEBUG = 1 - -include bertos/fonts/fonts.mk - -# Our target application -TRG += stm32p103 - -stm32p103_CSRC = \ - bertos/mware/formatwr.c \ - bertos/mware/hex.c \ - bertos/mware/sprintf.c \ - bertos/mware/event.c \ - bertos/struct/heap.c \ - bertos/kern/signal.c \ - bertos/kern/monitor.c \ - bertos/kern/proc.c \ - bertos/drv/timer.c \ - bertos/cpu/cortex-m3/drv/kdebug_stm32.c \ - bertos/cpu/cortex-m3/drv/gpio_stm32.c \ - bertos/cpu/cortex-m3/drv/clock_stm32.c \ - bertos/cpu/cortex-m3/drv/timer_cm3.c \ - bertos/cpu/cortex-m3/drv/irq_cm3.c \ - bertos/cpu/cortex-m3/hw/switch_ctx_cm3.c \ - bertos/cpu/cortex-m3/hw/init_cm3.c \ - examples/stm32p103/main.c - -stm32p103_CPPASRC = \ - bertos/cpu/cortex-m3/hw/vectors_cm3.S \ - bertos/cpu/cortex-m3/hw/crt_cm3.S \ - # - -# This is an hosted application -stm32p103_PREFIX = arm-none-eabi- - -stm32p103_CPPAFLAGS = -mthumb -stm32p103_CPPFLAGS = -D'ARCH=0' -D__ARM_STM32P103__ -D'CPU_FREQ=(72000000L)' -D'WIZ_AUTOGEN' -mthumb -Iexamples/stm32p103 -Ibertos/cpu/cortex-m3 -fno-strict-aliasing -fwrapv -stm32p103_LDFLAGS = -nostartfiles -T bertos/cpu/cortex-m3/scripts/stm32p103_rom.ld -Wl,--no-warn-mismatch -mthumb - -stm32p103_CPU = cortex-m3 - -stm32p103_PROGRAMMER_CPU = stm32 -stm32p103_PROGRAMMER_TYPE = jtag-tiny -stm32p103_FLASH_SCRIPT = bertos/prg_scripts/arm/flash-stm32.sh -stm32p103_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh -stm32p103_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh -stm32p103_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh - -ifeq ($(stm32p103_DEBUG),0) - # Production options - stm32p103_CFLAGS += -O0 - stm32p103_CXXFLAGS += -O0 -else - # Debug options - stm32p103_CPPAFLAGS += -g -gdwarf-2 - stm32p103_CPPFLAGS += -O0 -g3 -gdwarf-2 -fverbose-asm -endif diff --git a/examples/triface/boot/cfg/cfg_arch.h b/examples/triface/boot/cfg/cfg_arch.h deleted file mode 100644 index 0956196a..00000000 --- a/examples/triface/boot/cfg/cfg_arch.h +++ /dev/null @@ -1,57 +0,0 @@ -/** - * \file - * - * - * \brief Set system configuration - * - * \version $Id$ - * - * \author Bernie Innocenti - * - */ - - -#ifndef CFG_ARCH_CONFIG_H -#define CFG_ARCH_CONFIG_H - -#include - -/** - * \name Architectures - * \{ - */ -#define ARCH_TRIFACE BV(0) -#define ARCH_BOOT BV(1) -#define ARCH_EMUL BV(2) -/*\}*/ - -#endif /* CFG_ARCH_CONFIG_H */ diff --git a/examples/triface/boot/cfg/cfg_debug.h b/examples/triface/boot/cfg/cfg_debug.h deleted file mode 100644 index a7c548a9..00000000 --- a/examples/triface/boot/cfg/cfg_debug.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for Debug module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_DEBUG_H -#define CFG_DEBUG_H - -/// kdebug console. -#define CONFIG_KDEBUG_PORT 1 - -/// Baud-rate for the kdebug console. -#define CONFIG_KDEBUG_BAUDRATE 115200 - -#endif /* CFG_DEBUG_H */ diff --git a/examples/triface/boot/cfg/cfg_formatwr.h b/examples/triface/boot/cfg/cfg_formatwr.h deleted file mode 100644 index 91c992ab..00000000 --- a/examples/triface/boot/cfg/cfg_formatwr.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for formatted write module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_FORMTWR_H -#define CFG_FORMTWR_H - -/** - * printf()-style formatter configuration. - * - * \sa PRINTF_DISABLED - * \sa PRINTF_NOMODIFIERS - * \sa PRINTF_REDUCED - * \sa PRINTF_NOFLOAT - * \sa PRINTF_FULL - */ -#define CONFIG_PRINTF PRINTF_REDUCED - - -#endif /* CFG_FORMTWR_H */ - diff --git a/examples/triface/boot/cfg/cfg_kfile.h b/examples/triface/boot/cfg/cfg_kfile.h deleted file mode 100644 index e4f13b25..00000000 --- a/examples/triface/boot/cfg/cfg_kfile.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for KFile interface module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_KFILE_H -#define CFG_KFILE_H - -/// Module logging level definition. -#define KFILE_LOG_LEVEL LOG_LVL_INFO - -/// Module logging verbosity. -#define KFILE_LOG_FORMAT LOG_FMT_TERSE - -/// Enable the gets function with echo. -#define CONFIG_KFILE_GETS 1 - -#endif /* CFG_KFILE_H */ diff --git a/examples/triface/boot/cfg/cfg_proc.h b/examples/triface/boot/cfg/cfg_proc.h deleted file mode 100644 index 097025e2..00000000 --- a/examples/triface/boot/cfg/cfg_proc.h +++ /dev/null @@ -1,99 +0,0 @@ -/** - * \file - * - * - * \brief Kernel configuration parameters - * - * \version $Id$ - * \author Bernie Innocenti - */ - -#ifndef CFG_PROC_H -#define CFG_PROC_H - -/** - * Enable the multithreading kernel. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN 0 - -/** - * Kernel interrupt supervisor. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_IRQ 0 - -/** - * Dynamic memory allocation for processes. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_HEAP 0 - -/** - * Preemptive process scheduling. WARNING: Experimental, still incomplete! - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_PREEMPT 0 - -/** - * Priority-based scheduling policy. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_PRI 0 - -/** - * Time sharing quantum (a prime number prevents interference effects) [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = "0" - */ -#define CONFIG_KERN_QUANTUM 11 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KERN_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KERN_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PROC_H */ diff --git a/examples/triface/boot/cfg/cfg_ser.h b/examples/triface/boot/cfg/cfg_ser.h deleted file mode 100644 index 1f60c55a..00000000 --- a/examples/triface/boot/cfg/cfg_ser.h +++ /dev/null @@ -1,108 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for serial module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_SER_H -#define CFG_SER_H - - -/// Kdebug console on debug unit -#define CONFIG_BOOT_PORT 1 - -/// Baud-rate for the kdebug console -#define CONFIG_BOOT_BAUDRATE 115200 - -/// [bytes] Size of the outbound FIFO buffer for port 0. -#define CONFIG_UART0_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for port 0. -#define CONFIG_UART0_RXBUFSIZE 64 - -/// [bytes] Size of the outbound FIFO buffer for port 1. -#define CONFIG_UART1_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for port 1. -#define CONFIG_UART1_RXBUFSIZE 64 - - -/// [bytes] Size of the outbound FIFO buffer for SPI port (AVR only) -#define CONFIG_SPI_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for SPI port (AVR only) -#define CONFIG_SPI_RXBUFSIZE 32 - -/// [bytes] Size of the outbound FIFO buffer for SPI port 0. -#define CONFIG_SPI0_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for SPI port 0. -#define CONFIG_SPI0_RXBUFSIZE 32 - -/// [bytes] Size of the outbound FIFO buffer for SPI port 1. -#define CONFIG_SPI1_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for SPI port 1. -#define CONFIG_SPI1_RXBUFSIZE 32 - -/// SPI data order (AVR only). -#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST - -/// SPI clock division factor (AVR only). -#define CONFIG_SPI_CLOCK_DIV 16 - -/// SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). -#define CONFIG_SPI_CLOCK_POL 0 - -/// SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). -#define CONFIG_SPI_CLOCK_PHASE 0 - -/// Default transmit timeout (ms). Set to -1 to disable timeout support. -#define CONFIG_SER_TXTIMEOUT 100 - -/// Default receive timeout (ms). Set to -1 to disable timeout support. -#define CONFIG_SER_RXTIMEOUT 100 - -/// Use RTS/CTS handshake -#define CONFIG_SER_HWHANDSHAKE 0 - -/// Default baud rate (set to 0 to disable). -#define CONFIG_SER_DEFBAUDRATE 0 - -/// For serial debug. -#define CONFIG_SER_STROBE 0 - -#endif /* CFG_SER_H */ diff --git a/examples/triface/boot/hw/hw_boot.h b/examples/triface/boot/hw/hw_boot.h deleted file mode 100644 index 7bbb4817..00000000 --- a/examples/triface/boot/hw/hw_boot.h +++ /dev/null @@ -1,71 +0,0 @@ -/** - * \file - * - * - * \brief Macro for boot loader. - * - * - * \version $Id$ - * - * \author Daniele Basile - * \author Francesco Sacchi - */ - -#ifndef HW_BOOT_H -#define HW_BOOT_H - -#include -#include - -/* Set up function pointer to RESET vector */ -void (*rom_start)(void) NORETURN = 0x0000; - -#define START_APP() rom_start() - -#define BOOT_INIT do \ -{ \ - /* Enable change of Interrupt Vectors */ \ - MCUCR = BV(IVCE); \ - /* Move interrupts to boot Flash section */ \ - MCUCR = BV(IVSEL); \ -} while(0) - -#define BOOT_END do \ -{ \ - /* Enable change of Interrupt Vectors */ \ - MCUCR = BV(IVCE); \ - /* Move interrupts to boot Flash section */ \ - MCUCR = 0; \ -} while(0) - -#endif // HW_BOOT_H - diff --git a/examples/triface/boot/hw/hw_ser.h b/examples/triface/boot/hw/hw_ser.h deleted file mode 100644 index 21451b6c..00000000 --- a/examples/triface/boot/hw/hw_ser.h +++ /dev/null @@ -1,45 +0,0 @@ -/** - * \file - * - * - * \brief Serial hardware-specific definitions - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef HW_SER_H -#define HW_SER_H - - - -#endif /* HW_SER_H */ diff --git a/examples/triface/boot/main.c b/examples/triface/boot/main.c deleted file mode 100644 index d84dc255..00000000 --- a/examples/triface/boot/main.c +++ /dev/null @@ -1,123 +0,0 @@ -/** - * \file - * - * - * \brief Flash boot loader main. - * This is a simple generic bootloader app. - * It requires only a serial port to work. - * Try to receive a file through XMODEM protocol - * and flash it on program memory. - * BOOT_INIT, BOOT_END are macros used to perform special operations - * respectively at boot start and boot end and are CPU dependant. - * The macro START_APP() jumps to main application start. - * - * \version $Id$ - * \author Stefano Fedrigo - * \author Francesco Sacchi - * \author Daniele Basile - */ - -#include "hw/hw_boot.h" -#include "cfg/cfg_ser.h" - -#include - -#include -#include -#include /* BV() */ - -#include -#include -#include - -#include - -#include - -/* - * Watchdog disable. - * - * This function disable the watchdog timer early after a reset. - * We must do it very soon because new AVR cores do not disable - * the watchdog timer after a cpu reset. In this way the watchdog - * timer is still enabled, continuously resetting the cpu. This is - * necessary only with new AVR cores, for other cores this code has - * no effect. - * - * \{ - */ -// Function prototype of watchdog reset. -void wdt_init(void) __attribute__((naked)) __attribute__((section(".init3"))); -// Function implementation of watchdog reset. -void wdt_init(void) -{ - MCUSR = 0; - wdt_disable(); - - return; -} -/* \} */ - -int main(void) -{ - Flash flash; - Serial ser; - - - // Set up flash programming functions. - flash_init(&flash); - - IRQ_ENABLE; - - BOOT_INIT; - - kdbg_init(); - timer_init(); - - /* Open the main communication port */ - - ser_init(&ser, CONFIG_BOOT_PORT); - ser_setbaudrate(&ser, CONFIG_BOOT_BAUDRATE); - - xmodem_recv(&ser.fd, &flash.fd); - - kfile_close(&flash.fd); - kfile_close(&ser.fd); - - IRQ_DISABLE; - - BOOT_END; - - START_APP(); - -} - diff --git a/examples/triface/cfg/cfg_arch.h b/examples/triface/cfg/cfg_arch.h deleted file mode 100644 index 0956196a..00000000 --- a/examples/triface/cfg/cfg_arch.h +++ /dev/null @@ -1,57 +0,0 @@ -/** - * \file - * - * - * \brief Set system configuration - * - * \version $Id$ - * - * \author Bernie Innocenti - * - */ - - -#ifndef CFG_ARCH_CONFIG_H -#define CFG_ARCH_CONFIG_H - -#include - -/** - * \name Architectures - * \{ - */ -#define ARCH_TRIFACE BV(0) -#define ARCH_BOOT BV(1) -#define ARCH_EMUL BV(2) -/*\}*/ - -#endif /* CFG_ARCH_CONFIG_H */ diff --git a/examples/triface/cfg/cfg_debug.h b/examples/triface/cfg/cfg_debug.h deleted file mode 100644 index a7c548a9..00000000 --- a/examples/triface/cfg/cfg_debug.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for Debug module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_DEBUG_H -#define CFG_DEBUG_H - -/// kdebug console. -#define CONFIG_KDEBUG_PORT 1 - -/// Baud-rate for the kdebug console. -#define CONFIG_KDEBUG_BAUDRATE 115200 - -#endif /* CFG_DEBUG_H */ diff --git a/examples/triface/cfg/cfg_kfile.h b/examples/triface/cfg/cfg_kfile.h deleted file mode 100644 index 10bb72db..00000000 --- a/examples/triface/cfg/cfg_kfile.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for KFile interface module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_KFILE_H -#define CFG_KFILE_H - -/// Module logging level definition. -#define KFILE_LOG_LEVEL LOG_LVL_INFO - -/// Module logging format. -#define KFILE_LOG_FORMAT LOG_FMT_TERSE - -/// Enable the gets function with echo. -#define CONFIG_KFILE_GETS 1 - -#endif /* CFG_KFILE_H */ diff --git a/examples/triface/cfg/cfg_proc.h b/examples/triface/cfg/cfg_proc.h deleted file mode 100644 index 097025e2..00000000 --- a/examples/triface/cfg/cfg_proc.h +++ /dev/null @@ -1,99 +0,0 @@ -/** - * \file - * - * - * \brief Kernel configuration parameters - * - * \version $Id$ - * \author Bernie Innocenti - */ - -#ifndef CFG_PROC_H -#define CFG_PROC_H - -/** - * Enable the multithreading kernel. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN 0 - -/** - * Kernel interrupt supervisor. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_IRQ 0 - -/** - * Dynamic memory allocation for processes. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_HEAP 0 - -/** - * Preemptive process scheduling. WARNING: Experimental, still incomplete! - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_PREEMPT 0 - -/** - * Priority-based scheduling policy. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_PRI 0 - -/** - * Time sharing quantum (a prime number prevents interference effects) [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = "0" - */ -#define CONFIG_KERN_QUANTUM 11 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KERN_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KERN_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PROC_H */ diff --git a/examples/triface/cfg/cfg_ser.h b/examples/triface/cfg/cfg_ser.h deleted file mode 100644 index d65e64aa..00000000 --- a/examples/triface/cfg/cfg_ser.h +++ /dev/null @@ -1,114 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for serial module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_SER_H -#define CFG_SER_H - - -/// Kdebug console on debug unit -#define CONFIG_TRIFACE_PORT 1 - -/// Baud-rate for the kdebug console -#define CONFIG_TRIFACE_BAUDRATE 115200 - -/// Triface serial tag port -#define TAG_SER_PORT 0 - -///Baud-rate for triface serial tag port -#define TAG_SER_BAUDRATE 9600 - -/// [bytes] Size of the outbound FIFO buffer for port 0. -#define CONFIG_UART0_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for port 0. -#define CONFIG_UART0_RXBUFSIZE 64 - -/// [bytes] Size of the outbound FIFO buffer for port 1. -#define CONFIG_UART1_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for port 1. -#define CONFIG_UART1_RXBUFSIZE 64 - - -/// [bytes] Size of the outbound FIFO buffer for SPI port (AVR only) -#define CONFIG_SPI_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for SPI port (AVR only) -#define CONFIG_SPI_RXBUFSIZE 32 - -/// [bytes] Size of the outbound FIFO buffer for SPI port 0. -#define CONFIG_SPI0_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for SPI port 0. -#define CONFIG_SPI0_RXBUFSIZE 32 - -/// [bytes] Size of the outbound FIFO buffer for SPI port 1. -#define CONFIG_SPI1_TXBUFSIZE 32 - -/// [bytes] Size of the inbound FIFO buffer for SPI port 1. -#define CONFIG_SPI1_RXBUFSIZE 32 - -/// SPI data order (AVR only). -#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST - -/// SPI clock division factor (AVR only). -#define CONFIG_SPI_CLOCK_DIV 16 - -/// SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). -#define CONFIG_SPI_CLOCK_POL 0 - -/// SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). -#define CONFIG_SPI_CLOCK_PHASE 0 - -/// Default transmit timeout (ms). Set to -1 for infinite timeout, 0 for null timeout -#define CONFIG_SER_TXTIMEOUT 0 - -/// Default receive timeout (ms). Set to -1 for infinite timeout, 0 for null timeout -#define CONFIG_SER_RXTIMEOUT 0 - -/// Use RTS/CTS handshake -#define CONFIG_SER_HWHANDSHAKE 0 - -/// Default baud rate (set to 0 to disable). -#define CONFIG_SER_DEFBAUDRATE 0 - -/// For serial debug. -#define CONFIG_SER_STROBE 0 - -#endif /* CFG_SER_H */ diff --git a/examples/triface/cfg/cfg_wdt.h b/examples/triface/cfg/cfg_wdt.h deleted file mode 100644 index f67cb320..00000000 --- a/examples/triface/cfg/cfg_wdt.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for watchdog module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_WDT_H -#define CFG_WDT_H - -/// Enable watchdog timer. -#define CONFIG_WATCHDOG 1 - -#endif /* CFG_WDT_H */ - - diff --git a/examples/triface/cmd_ctor.h b/examples/triface/cmd_ctor.h deleted file mode 100644 index 0e38c836..00000000 --- a/examples/triface/cmd_ctor.h +++ /dev/null @@ -1,59 +0,0 @@ -/** - * \file - * - * - * \brief Macro for defining command for protocol. - * - * \author Marco Benelli - */ - -#ifndef CMD_CTOR_H -#define CMD_CTOR_H - -#include - -#define REGISTER_FUNCTION parser_register_cmd - -#define REGISTER_CMD(NAME) REGISTER_FUNCTION(&cmd_ ## NAME ## _template) - -#define MAKE_TEMPLATE(NAME, ARGS, RES, FLAGS) \ -const struct CmdTemplate cmd_ ## NAME ## _template = \ -{ \ - #NAME, ARGS, RES, cmd_ ## NAME, FLAGS \ -}; - -#define MAKE_CMD(NAME, ARGS, RES, BODY, FLAGS) \ -static ResultCode cmd_ ## NAME (parms *args) \ -{ \ - return (ResultCode)BODY; \ -} \ -MAKE_TEMPLATE(NAME, ARGS, RES, FLAGS) - -#endif // CMD_CTOR_H diff --git a/examples/triface/doc/PROTOCOL b/examples/triface/doc/PROTOCOL deleted file mode 100644 index defc38d5..00000000 --- a/examples/triface/doc/PROTOCOL +++ /dev/null @@ -1,84 +0,0 @@ - -Command format: - - ... - -Where: - command - alphanumeric command name - argN - numeric argument (unsigned base 10, 0-65535) - -Positive response format: - - 0... - -Where: - argN - numeric value (unsigned base 10, 0-65535) - -Negative response format: - - -N"" - -Where: - -N - numeric error code (negative number) - desc - verbose error description - -# Write digital outputs (masked) -> dout 120 240 -< 0 - -# Read digital inputs -> din -< 0 125 - -# Read analog inputs -> ain -< 0 32 121 35 31 - -# Wait specified amount of milliseconds -> sleep 300 -< 0 - -# Return firmware major version, minor version and revision -> vers -< 0 1 42 0 - -# Reset board -< reset -> 0 - -# Ping/nop -< ping -> 0 - -# NOP (empty command) -> -< (ignored) - -# Comments -> # foo bar foobar -< (ignored) - -# Unknown command -> sing -< -1 "Unknown command" - -# Missing parameter -> dout -< -2 "Required parameter missing" - -# Too many parameters -> din 42 666 -< -3 "Too many parameters" - -# Malformed command -> dout %'I! -< -4 "Invalid parameter" - -# Attention -> or -< 1 "Uh?" - - -To recover from a possibly unknown board status, -a client should begin the conversation by issuing -an attention sequence, eventually followed by a reset. diff --git a/examples/triface/doc/schematics/TRIFACE.DSN b/examples/triface/doc/schematics/TRIFACE.DSN deleted file mode 100644 index d18fa84b..00000000 Binary files a/examples/triface/doc/schematics/TRIFACE.DSN and /dev/null differ diff --git a/examples/triface/doc/schematics/triface.opj b/examples/triface/doc/schematics/triface.opj deleted file mode 100644 index 79f75bb3..00000000 --- a/examples/triface/doc/schematics/triface.opj +++ /dev/null @@ -1,36 +0,0 @@ -(ExpressProject "triface" - (ProjectVersion "19981106") - (ProjectType "PCB") - (Folder "Design Resources" - (Folder "Library") - (NoModify) - (File ".\triface.dsn" - (Type "Schematic Design")) - (BuildFileAddedOrDeleted "x") - (CompileFileAddedOrDeleted "x") - (ANNOTATE_Scope "0") - (ANNOTATE_Mode "1") - (ANNOTATE_Action "0") - (Annotate_Page_Order "0") - (ANNOTATE_Reset_References_to_1 "FALSE") - (ANNOTATE_No_Page_Number_Change "FALSE") - (ANNOTATE_Property_Combine "{Value}{Source Package}{POWER_GROUP}") - (ANNOTATE_IncludeNonPrimitive "FALSE")) - (Folder "Outputs") - (Folder "Referenced Projects") - (PartMRUSelector) - (GlobalState - (FileView - (Path "Design Resources") - (Path "Design Resources" - "c:\documents and settings\administrator\desktop\new triface\triface.dsn") - (Path "Design Resources" - "c:\documents and settings\administrator\desktop\new triface\triface.dsn" - "TRIFACE BOARD")) - (HierarchyView) - (Doc - (Type "COrCapturePMDoc") - (Frame - (Placement "44 2 3 -1 -1 -4 -23 214 743 2 443")) - (Tab 0))) - (MPSSessionName "Administrator")) diff --git a/examples/triface/hw/hw_adc.c b/examples/triface/hw/hw_adc.c deleted file mode 100644 index db51bf28..00000000 --- a/examples/triface/hw/hw_adc.c +++ /dev/null @@ -1,107 +0,0 @@ -/** - * \file - * - * - * \brief ADC: Analogic to Digital Converter - * - * - * \author Andrea Grandi - */ - -#include "hw/hw_adc.h" - - -#include - -#include - -#include - -/** Set the active AI channel */ -void adc_set_active_ain(int ai) -{ - /* If number of channels is <= 4 we use the first two MUX bits */ - STATIC_ASSERT(ADC_CHANNEL_NUM <= 4); - - ai &= BV(0) | BV(1); - ADMUX &= ~BV(MUX0); - ADMUX &= ~BV(MUX1); - ADMUX |= ai; -} - -/** Initialize the ADC */ -void adc_init(void) -{ - /* Set analog IN as input */ - DDRF &= ~(BV(PF0) | BV(PF1) | BV(PF2) | BV(PF3)); - - /* Disable pull-up */ - PORTF &= ~(BV(PF0) | BV(PF1) | BV(PF2) | BV(PF3)); - - ENABLE_ADC; - adc_set_vref_avcc(); - SET_AI_ADLAR; - - /* Set the Division Factor to 128 */ - ADCSRA |= (BV(ADPS0) | BV(ADPS1) | BV(ADPS2)); -} - -/** Set the initial reference */ -void adc_set_vref_avcc(void) -{ - ADMUX &= ~BV(REFS1); - ADMUX |= BV(REFS0); -} - -/** Read the specified AI channel */ -int adc_read_ai_channel(int channel) -{ - adc_set_active_ain(channel); - timer_udelay(STABILIZING_AI_CHANNEL_TIME); - START_CONVERTION; - - while(ADCSRA & BV(ADSC)) - { - /* - * Intentionally empty loop. - * It waits the convertion to be completed by ADC - */ - } - - ADCSRA |= BV(ADIF); - - uint16_t val; - val = ADCL; - val |= (uint16_t)ADCH << 8; - - return val; -} diff --git a/examples/triface/hw/hw_adc.h b/examples/triface/hw/hw_adc.h deleted file mode 100644 index 1c6e99b8..00000000 --- a/examples/triface/hw/hw_adc.h +++ /dev/null @@ -1,61 +0,0 @@ -/** - * \file - * ght 2006 Develer S.r.l. (http://www.develer.com/) - * - * \brief Macro for HW_AIN_H - * - * - * \author Andrea Grandi - */ - -#ifndef HW_ADC_H -#define HW_ADC_H - -#include - -#define START_CONVERTION (ADCSRA |= BV(ADSC)) -#define ENABLE_ADC (ADCSRA |= BV(ADEN)) -#define SET_AI_ADLAR (ADMUX &= ~BV(ADLAR)) - -/** Microseconds to wait before starting conversion after changing a channel */ -#define STABILIZING_AI_CHANNEL_TIME 125 - -/** Number of AIN channels */ -#define ADC_CHANNEL_NUM 4 - -void adc_set_active_ain(int ai); -void adc_init(void); -void adc_set_vref_avcc(void); -int adc_read_ai_channel(int channel); - -#endif // HW_ADC_H - diff --git a/examples/triface/hw/hw_buzzer.h b/examples/triface/hw/hw_buzzer.h deleted file mode 100644 index a2b683ad..00000000 --- a/examples/triface/hw/hw_buzzer.h +++ /dev/null @@ -1,53 +0,0 @@ -/** - * \file - * - * - * \brief Buzzer hardware-specific definitions - * - * \author Francesco Sacchi - * \author Andrea Grandi - */ - -#ifndef HW_BUZZER_H -#define HW_BUZZER_H - -#include -#include - -#define BUZZER_BIT BV(PE3) -#define IS_BUZZER_ON (PORTE & BUZZER_BIT) -#define BUZZER_HW_INIT do { DDRE |= BV(DDE3); } while (0) -#define BUZZER_ON do { PORTE |= BUZZER_BIT; } while (0) -#define BUZZER_OFF do { PORTE &= ~BUZZER_BIT; } while (0) - -#endif /* HW_BUZZER_H */ - diff --git a/examples/triface/hw/hw_input.h b/examples/triface/hw/hw_input.h deleted file mode 100644 index f0ef721c..00000000 --- a/examples/triface/hw/hw_input.h +++ /dev/null @@ -1,71 +0,0 @@ -/** - * \file - * - * - * \brief Macro for HW_INPUT_H - * - * \author Andrea Grandi - */ - -#ifndef HW_INPUT_H -#define HW_INPUT_H - -#include - -/* Set pins as input and enable pull-up */ -#define INPUT_INIT_D do \ -{ \ - (DDRD &= ~(BV(PD4) | BV(PD5) | BV(PD6) | BV(PD7))); \ - (PORTD |= (BV(PD4) | BV(PD5) | BV(PD6) | BV(PD7))); \ -} while(0) - -#define INPUT_INIT_E do \ -{ \ - (DDRE &= ~(BV(PE4) | BV(PE5) | BV(PE6) | BV(PE7))); \ - ATOMIC((PORTE |= (BV(PE4) | BV(PE5) | BV(PE6) | BV(PE7)))); \ -} while(0) - -#define INPUT_INIT do { INPUT_INIT_D; INPUT_INIT_E;} while(0) - -INLINE uint8_t INPUT_GET(void) -{ - uint8_t out_d, out_e; - out_d = PIND; - out_e = PINE; - - out_d >>= 4; - out_e = out_e & 0xF0; - - return out_e | out_d; -} - -#endif // HW_INPUT_H diff --git a/examples/triface/hw/hw_ser.h b/examples/triface/hw/hw_ser.h deleted file mode 100644 index e51824d5..00000000 --- a/examples/triface/hw/hw_ser.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - * \file - * - * - * \brief Macro for STROBE signal - * - * \version $Id$ - * - * \author Manuele Fanelli - */ - -#ifndef HW_SER_H -#define HW_SER_H - -#include "cfg/cfg_ser.h" - -#if CONFIG_SER_STROBE - - #define SER_STROBE_ON do {PORTC |= BV(0);} while(0) - #define SER_STROBE_OFF do {PORTC &= ~BV(0);} while(0) - #define SER_STROBE_INIT do {DDRC |= BV(0); } while(0) -#endif - -#endif //HW_SER_H diff --git a/examples/triface/hw/hw_sipo.h b/examples/triface/hw/hw_sipo.h deleted file mode 100644 index 9922c052..00000000 --- a/examples/triface/hw/hw_sipo.h +++ /dev/null @@ -1,149 +0,0 @@ -/** - * \file - * - * - * \brief Macro for HW_SIPO_H - * - * - * \author Andrea Grandi - * \author Daniele Basile - */ - -#ifndef HW_SIPO_H -#define HW_SIPO_H - -#include - -#include - -/** - * Mapping sipo connection on board. - * See schematics for more info. - */ -typedef enum SipoMap -{ - TRIFACE_DOUT = 0, - - SIPO_CNT -} SipoMap; - - - -//Set output pin for sipo -#define SCK_OUT (DDRB |= BV(PB1)) // Shift register clock input pin -#define SOUT_OUT (DDRB |= BV(PB2)) // Serial data input pin -#define SLOAD_OUT (DDRB |= BV(PB3)) // Storage register clock input pin -#define OE_OUT (DDRG |= BV(PG3)) // Output enable pin - -//Define output level -#define SCK_HIGH (PORTB |= BV(PB1)) -#define SCK_LOW (PORTB &= ~BV(PB1)) -#define SOUT_OUT_HIGH (PORTB |= BV(PB2)) -#define SOUT_OUT_LOW (PORTB &= ~BV(PB2)) -#define SLOAD_OUT_HIGH (PORTB |= BV(PB3)) -#define SLOAD_OUT_LOW (PORTB &= ~BV(PB3)) -#define OE_LOW (PORTG &= BV(PG3)) - -/** - * Define the macros needed to set the serial input bit of SIPO device - * low or high. - */ -#define SIPO_SI_HIGH() SOUT_OUT_HIGH -#define SIPO_SI_LOW() SOUT_OUT_LOW - -/** - * Drive pin to load the bit, presented in serial-in pin, - * into sipo shift register. - */ -#define SIPO_SI_CLOCK(clk_pol) \ - do{ \ - (void)clk_pol; \ - SCK_HIGH; \ - SCK_LOW; \ - }while(0) - -/** - * Clock the content of shift register to output. - */ -#define SIPO_LOAD(device, load_pol) \ - do { \ - (void)device; \ - (void)load_pol; \ - SLOAD_OUT_HIGH; \ - SLOAD_OUT_LOW; \ - }while(0) - -/** - * Enable the shift register output. - */ -#define SIPO_ENABLE() OE_LOW; - -/** - * Set logic level for load signal - */ -#define SIPO_SET_LD_LEVEL(device, load_pol) \ - do { \ - (void)device; \ - if(load_pol) \ - SLOAD_OUT_HIGH; \ - else \ - SLOAD_OUT_LOW; \ - } while (0) - - -/** - * Sel logic level for clock signal - */ -#define SIPO_SET_CLK_LEVEL(clock_pol) \ - do { \ - if(clock_pol) \ - SCK_HIGH; \ - else \ - SCK_LOW; \ - } while (0) - -#define SIPO_SET_SI_LEVEL() SIPO_SI_LOW() - -/** - * Do everything needed in order to init the SIPO pins. - */ -#define SIPO_INIT_PIN() \ - do { \ - OE_OUT; \ - SOUT_OUT; \ - SCK_OUT; \ - SLOAD_OUT; \ - SIPO_ENABLE(); \ - } while(0) - - -#endif /* HW_SIPO_H */ diff --git a/examples/triface/protocol.c b/examples/triface/protocol.c deleted file mode 100644 index eec73684..00000000 --- a/examples/triface/protocol.c +++ /dev/null @@ -1,382 +0,0 @@ -/** - * \file - * - * - * \brief Implementation of the command protocol between the board and the host - * - * - * \author Giovanni Bajo - * \author Marco Benelli - * \author Bernie Innocenti - * \author Daniele Basile - */ - -#include "protocol.h" -#include "cmd_ctor.h" // MAKE_CMD, REGISTER_CMD -#include "verstag.h" - -#include "hw/hw_adc.h" -#include "hw/hw_input.h" - -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include - -#include -#include - -// Define the format string for ADC -#define ADC_FORMAT_STR "dddd" - -// DEBUG: set to 1 to force interactive mode -#define FORCE_INTERACTIVE 1 - -/** - * True if we are in interactive mode, false if we are in protocol mode. - * In interactive mode, commands are read through readline() (prompt, - * completion, history) without IDs, and replies/errors are sent to the serial - * output. - * In protocol mode, we implement the default protocol - */ -static bool interactive; - -/// Readline context, used for interactive mode. -static struct RLContext rl_ctx; - -static Sipo fd_sipo; - -uint8_t reg_status_dout; -/** - * Send a NAK asking the host to send the current message again. - * - * \a fd kfile handler for serial. - * \a err human-readable description of the error for debug purposes. - */ -INLINE void NAK(KFile *fd, const char *err) -{ -#ifdef _DEBUG - kfile_printf(fd, "NAK \"%s\"\r\n", err); -#else - kfile_printf(fd, "NAK\r\n"); -#endif -} - -static void protocol_prompt(KFile *fd) -{ - kfile_print(fd, ">> "); -} - -/* - * Print args on s, with format specified in t->result_fmt. - * Return number of valid arguments or -1 in case of error. - */ -static bool protocol_reply(KFile *fd, const struct CmdTemplate *t, - const parms *args) -{ - unsigned short offset = strlen(t->arg_fmt) + 1; - unsigned short nres = strlen(t->result_fmt); - - for (unsigned short i = 0; i < nres; ++i) - { - if (t->result_fmt[i] == 'd') - { - kfile_printf(fd, " %ld", args[offset+i].l); - } - else if (t->result_fmt[i] == 's') - { - kfile_printf(fd, " %s", args[offset+i].s); - } - - else - { - abort(); - } - } - kfile_printf(fd, "\r\n"); - return true; -} - -static void protocol_parse(KFile *fd, const char *buf) -{ - const struct CmdTemplate *templ; - - /* Command check. */ - templ = parser_get_cmd_template(buf); - if (!templ) - { - kfile_print(fd, "-1 Invalid command.\r\n"); - protocol_prompt(fd); - return; - } - - parms args[PARSER_MAX_ARGS]; - - /* Args Check. TODO: Handle different case. see doc/PROTOCOL . */ - if (!parser_get_cmd_arguments(buf, templ, args)) - { - kfile_print(fd, "-2 Invalid arguments.\r\n"); - protocol_prompt(fd); - return; - } - - /* Execute. */ - if(!parser_execute_cmd(templ, args)) - { - NAK(fd, "Error in executing command."); - } - if (!protocol_reply(fd, templ, args)) - { - NAK(fd, "Invalid return format."); - } - - protocol_prompt(fd); - return; -} - -void protocol_run(KFile *fd) -{ - /** - * \todo to be removed, we could probably access the serial FIFO - * directly - */ - static char linebuf[80]; - - if (!interactive) - { - kfile_gets(fd, linebuf, sizeof(linebuf)); - - // reset serial port error anyway - kfile_clearerr(fd); - - // check message minimum length - if (linebuf[0]) - { - /* If we enter lines beginning with sharp(#) - they are stripped out from commands */ - if(linebuf[0] != '#') - { - if (linebuf[0] == 0x1B && linebuf[1] == 0x1B) // ESC - { - interactive = true; - kfile_printf(fd, "Entering interactive mode\r\n"); - } - else - { - protocol_parse(fd, linebuf); - } - } - } - } - else - { - const char *buf; - - /* - * Read a line from serial. We use a temporary buffer - * because otherwise we would have to extract a message - * from the port immediately: there might not be any - * available, and one might get free while we read - * the line. We also add a fake ID at the start to - * fool the parser. - */ - buf = rl_readline(&rl_ctx); - - /* If we enter lines beginning with sharp(#) - they are stripped out from commands */ - if(buf && buf[0] != '#') - { - if (buf[0] != '\0') - { - // exit special case to immediately change serial input - if (!strcmp(buf, "exit") || !strcmp(buf, "quit")) - { - rl_clear_history(&rl_ctx); - kfile_printf(fd, "Leaving interactive mode...\r\n"); - interactive = FORCE_INTERACTIVE; - } - else - { - //TODO: remove sequence numbers - linebuf[0] = '0'; - linebuf[1] = ' '; - - strncpy(linebuf + 2, buf, sizeof(linebuf) - 3); - linebuf[sizeof(linebuf) - 1] = '\0'; - protocol_parse(fd, linebuf); - } - } - } - } -} - -/* - * Commands. - * TODO: Command declarations and definitions should be in another file(s). - * Maybe we should use CMD_HUNK_TEMPLATE. - * - */ - -MAKE_CMD(ver, "", "ddd", -({ - args[1].l = VERS_MAJOR; - args[2].l = VERS_MINOR; - args[3].l = VERS_REV; - 0; -}), 0); - -/* Sleep. Example of declaring function body directly in macro call. */ -MAKE_CMD(sleep, "d", "", -({ - timer_delay((mtime_t)args[1].l); - 0; -}), 0) - -/* Ping. */ -MAKE_CMD(ping, "", "", -({ - //Silence "args not used" warning. - (void)args; - 0; -}), 0) - -/* Dout */ -MAKE_CMD(dout, "d", "", -({ - kfile_putc((uint8_t)args[1].l, &fd_sipo.fd); - - //Store status of dout ports. - reg_status_dout = (uint8_t)args[1].l; - 0; -}), 0) - -/* rdout read the status of out ports.*/ -MAKE_CMD(rdout, "", "d", -({ - args[1].l = reg_status_dout; - 0; -}), 0) - - -/* Reset */ -MAKE_CMD(reset, "", "", -({ - //Silence "args not used" warning. - (void)args; - wdt_enable(WDTO_2S); - - /*We want to have an infinite loop that lock access on watchdog timer. - This piece of code it's equivalent to a while(true), but we have done this because - gcc generate a warning message that suggest to use "noreturn" parameter in function reset.*/ - ASSERT(args); - while(args); - 0; - -}), 0) - -/* Din */ -MAKE_CMD(din, "", "d", -({ - args[1].l = INPUT_GET(); - 0; -}), 0) - - - -/* Ain */ -MAKE_CMD(ain, "", ADC_FORMAT_STR, -({ - STATIC_ASSERT((sizeof(ADC_FORMAT_STR) - 1) == ADC_CHANNEL_NUM); - for(int i = 0; i < ADC_CHANNEL_NUM; i++) - args[i+1].l = adc_read_ai_channel(i); - - 0; -}), 0) - -/* Beep */ -MAKE_CMD(beep, "d", "", -({ - buz_beep(args[1].l); - 0; -}), 0) - -/* Register commands. */ -static void protocol_registerCmds(void) -{ - REGISTER_CMD(ver); - REGISTER_CMD(sleep); - REGISTER_CMD(ping); - REGISTER_CMD(dout); - //Set off all dout ports. - reg_status_dout = 0; - REGISTER_CMD(rdout); - REGISTER_CMD(reset); - REGISTER_CMD(din); - REGISTER_CMD(ain); - REGISTER_CMD(beep); -} - -/* Initialization: readline context, parser and register commands. */ -void protocol_init(KFile *fd) -{ - /* SPI Port Initialization */ - fd_sipo.load_device = TRIFACE_DOUT; - fd_sipo.bit_order = SIPO_DATAORDER_LSB; - fd_sipo.clock_pol = SIPO_START_LOW; - fd_sipo.load_pol = SIPO_LOW_TO_HIGH; - - sipo_init(&fd_sipo); - - interactive = FORCE_INTERACTIVE; - - rl_init_ctx(&rl_ctx); - //rl_setprompt(&rl_ctx, ">> "); - rl_sethook_get(&rl_ctx, (getc_hook)kfile_getc, fd); - rl_sethook_put(&rl_ctx, (putc_hook)kfile_putc, fd); - rl_sethook_match(&rl_ctx, parser_rl_match, NULL); - rl_sethook_clear(&rl_ctx, (clear_hook)kfile_clearerr,fd); - - parser_init(); - - protocol_registerCmds(); - - protocol_prompt(fd); -} diff --git a/examples/triface/protocol.h b/examples/triface/protocol.h deleted file mode 100644 index 8075bc87..00000000 --- a/examples/triface/protocol.h +++ /dev/null @@ -1,50 +0,0 @@ -/** - * \file - * - * - * \brief Implementation of the command protocol between the board and the host - * - * \author Marco Benelli - */ - - -#ifndef PROTOCOL_H -#define PROTOCOL_H - -#include - -#include - -void protocol_init(KFile *fd); -void protocol_run(KFile *fd); - -#endif // PROTOOCOL_H diff --git a/examples/triface/triface.c b/examples/triface/triface.c deleted file mode 100644 index c64b6ceb..00000000 --- a/examples/triface/triface.c +++ /dev/null @@ -1,93 +0,0 @@ -/** - * \file - * - * - * \author Marco Benelli - * \author Bernie Innocenti - * \author Daniele Basile - * - * \brief Windowing system test. - */ - - -#include "protocol.h" -#include "hw/hw_input.h" -#include "hw/hw_adc.h" -#include "cfg/cfg_ser.h" - -#include - -#include -#include -#include - -#include -#include - -static Serial fd_ser; -static Serial tag_ser; - -int main(void) -{ - kdbg_init(); - timer_init(); - adc_init(); - buz_init(); - - IRQ_ENABLE; - INPUT_INIT; - - /* Initialize Tag serial port and data structure */ - TagPacket pkt; - - /* Open the main communication port */ - ser_init(&fd_ser, CONFIG_TRIFACE_PORT); - ser_setbaudrate(&fd_ser, CONFIG_TRIFACE_BAUDRATE); - - ser_init(&tag_ser, TAG_SER_PORT); - ser_setbaudrate(&tag_ser, TAG_SER_BAUDRATE); - - keytag_init(&pkt, &fd_ser.fd, &tag_ser.fd); - - protocol_init(&fd_ser.fd); - - // Main loop - for(;;) - { - protocol_run(&fd_ser.fd); - keytag_poll(&pkt); - } - - return 0; -} - - diff --git a/examples/triface/triface.mk b/examples/triface/triface.mk deleted file mode 100644 index 5341610a..00000000 --- a/examples/triface/triface.mk +++ /dev/null @@ -1,106 +0,0 @@ -# -# $Id$ -# Copyright 2006 Develer S.r.l. (http://www.develer.com/) -# All rights reserved. -# -# Makefile fragment for DevLib triface application. -# -# Author: Bernie Innocenti -# -# - -# Set to 1 for debug builds -triface_DEBUG = 1 - -# Our target application -TRG += triface -CPU = atmega1281 -BOOT_ADDR_START = 0x1E000 - -triface_PREFIX = avr- - -ifeq ($(CPU), atmega1281) -triface_hfuse = 0x98 -triface_lfuse = 0x3d -triface_efuse = 0x7f -triface_lock = 0x2f -else -triface_hfuse = 0x88 -triface_lfuse = 0xff -triface_efuse = 0xff -triface_lock = 0x2f -endif - -triface_MCU = $(CPU) - -triface_CSRC = \ - examples/triface/triface.c \ - examples/triface/protocol.c \ - examples/triface/hw/hw_adc.c \ - bertos/cpu/avr/drv/ser_avr.c \ - bertos/cpu/avr/drv/timer_avr.c \ - bertos/drv/timer.c \ - bertos/drv/ser.c \ - bertos/drv/buzzer.c \ - bertos/drv/sipo.c \ - bertos/mware/formatwr.c \ - bertos/mware/hex.c \ - bertos/mware/readline.c \ - bertos/mware/parser.c \ - bertos/mware/event.c \ - bertos/struct/hashtable.c \ - bertos/kern/kfile.c \ - bertos/net/keytag.c \ - # - -triface_PCSRC += bertos/mware/formatwr.c - -triface_CFLAGS = -O2 -D'ARCH=(ARCH_TRIFACE)' -D'CPU_FREQ=(14745600UL)' -D'WIZ_AUTOGEN' \ - -fno-strict-aliasing -fwrapv -Iexamples/triface -Ibertos/cpu/avr - -triface_LDFLAGS = -Wl - -triface_PROGRAMMER_CPU = atmega1281 -triface_PROGRAMMER_TYPE = stk500v2 -triface_PROGRAMMER_PORT = /dev/ttyS1 -triface_FLASH_SCRIPT = bertos/prg_scripts/avr/flash.sh -triface_STOPFLASH_SCRIPT = bertos/prg_scripts/none.sh -triface_DEBUG_SCRIPT = bertos/prg_scripts/nodebug.sh -triface_STOPDEBUG_SCRIPT = bertos/prg_scripts/none.sh - -# Set to 1 for debug builds -boot_DEBUG = 0 - -# Our target application -TRG += boot - -boot_MCU = $(CPU) -boot_CSRC = \ - examples/triface/boot/main.c \ - bertos/cpu/avr/drv/ser_avr.c \ - bertos/cpu/avr/drv/flash_avr.c \ - bertos/drv/timer.c \ - bertos/cpu/avr/drv/timer_avr.c \ - bertos/drv/ser.c \ - bertos/net/xmodem.c \ - bertos/algo/crc.c \ - bertos/mware/hex.c \ - bertos/kern/kfile.c \ - # - -boot_PREFIX = avr- - -boot_CPPFLAGS = -D'ARCH=(ARCH_TRIFACE|ARCH_BOOT)' -D'CPU_FREQ=(14745600UL)' -D'WIZ_AUTOGEN' \ - -fno-strict-aliasing -fwrapv -Iexamples/triface/boot -Ibertos/cpu/avr - -boot_CFLAGS = -Os -mcall-prologues -boot_LDFLAGS = -Wl,--relax -Wl,--section-start=.text=$(BOOT_ADDR_START) - - -boot_PROGRAMMER_CPU = $(triface_PROGRAMMER_CPU) -boot_PROGRAMMER_TYPE = $(triface_PROGRAMMER_TYPE) -boot_PROGRAMMER_PORT = $(triface_PROGRAMMER_PORT) -boot_FLASH_SCRIPT = $(triface_FLASH_SCRIPT) -boot_STOPFLASH_SCRIPT = $(triface_STOPFLASH_SCRIPT) -boot_DEBUG_SCRIPT = $(triface_DEBUG_SCRIPT) -boot_STOPDEBUG_SCRIPT = $(triface_STOPDEBUG_SCRIPT) diff --git a/examples/triface/verstag.h b/examples/triface/verstag.h deleted file mode 100644 index cbe71278..00000000 --- a/examples/triface/verstag.h +++ /dev/null @@ -1,95 +0,0 @@ -/** - * \file - * - * - * \version $Id$ - * - * \author Bernie Innocenti - * - * \brief Declare application version strings - */ - -#ifndef BERTOS_VERSTAG_H -#define BERTOS_VERSTAG_H - -#ifndef CFG_ARCH_CONFIG_H - #include "cfg/cfg_arch.h" -#endif - -#define APP_NAME "Triface" -#define APP_DESCRIPTION "Trinity Interface Board" -#define APP_AUTHOR "Develer" -#define APP_COPYRIGHT "Copyright 2006, 2007, 2008, Develer (http://www.develer.com/)" - -#define VERS_MAJOR 2 -#define VERS_MINOR 1 -#define VERS_REV 0 -#define VERS_LETTER "" - -/** - * If _SNAPSHOT is defined, \c VERS_TAG contains the build date - * date instead of a numeric version string. - */ -//#define _SNAPSHOT - -#ifdef _DEBUG - #define VERS_DBG "D" -#else - #define VERS_DBG "" -#endif - -#define __STRINGIZE(x) #x -#define _STRINGIZE(x) __STRINGIZE(x) - -/** Build application version string (i.e.: "1.7.0") */ -#define MAKE_VERS(maj,min,rev) _STRINGIZE(maj) "." _STRINGIZE(min) "." _STRINGIZE(rev) VERS_LETTER VERS_DBG -#ifdef _SNAPSHOT - #define VERS_TAG "snapshot" " " __DATE__ " " __TIME__ " " VERS_LETTER " " VERS_DBG -#else - #define VERS_TAG MAKE_VERS(VERS_MAJOR,VERS_MINOR,VERS_REV) -#endif - -/** Build application version string suitable for MS windows resource files (i.e.: "1, 7, 0, 1") */ -#define MAKE_RCVERS(maj,min,rev,bld) _STRINGIZE(maj) ", " _STRINGIZE(min) ", " _STRINGIZE(rev) ", " _STRINGIZE(bld) -#define RCVERSION_TAG MAKE_VERS(VERS_MAJOR,VERS_MINOR,VERS_REV) - -/** The revision string (contains VERS_TAG) */ -extern const char vers_tag[]; - -/** Sequential build number (contains VERS_BUILD) */ -extern const int vers_build_nr; -//extern const char vers_build_str[]; - -/** Hostname of the machine used to build this binary (contains VERS_HOST) */ -extern const char vers_host[]; - -#endif /* BERTOS_VERSTAG_H */