From: asterix Date: Fri, 21 May 2010 08:06:54 +0000 (+0000) Subject: Move this example into board presets. X-Git-Tag: 2.5.0~145 X-Git-Url: https://codewiz.org/gitweb?a=commitdiff_plain;h=02852d9a8d7887552b7cea69feabc2037cb7d1f5;p=bertos.git Move this example into board presets. git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3772 38d2e660-2303-0410-9eaa-f027e97ec537 --- diff --git a/examples/avr-kern/avr-kern.mk b/examples/avr-kern/avr-kern.mk deleted file mode 100644 index d4e2891c..00000000 --- a/examples/avr-kern/avr-kern.mk +++ /dev/null @@ -1,55 +0,0 @@ -# -# Copyright 2009 Develer S.r.l. (http://www.develer.com/) -# All rights reserved. -# -# Makefile template for BeRTOS wizard. -# -# Author: Lorenzo Berni -# -# - -# Programmer interface configuration, see http://dev.bertos.org/wiki/ProgrammerInterface for help -avr-kern_PROGRAMMER_TYPE = none -avr-kern_PROGRAMMER_PORT = none - -# Files included by the user. -avr-kern_USER_CSRC = \ - examples/avr-kern/main.c \ - bertos/kern/proc_test.c \ - bertos/kern/signal_test.c \ - bertos/mware/sprintf.c \ - # - -# Files included by the user. -avr-kern_USER_PCSRC = \ - # - -# Files included by the user. -avr-kern_USER_CPPASRC = \ - # - -# Files included by the user. -avr-kern_USER_CXXSRC = \ - # - -# Files included by the user. -avr-kern_USER_ASRC = \ - # - -# Flags included by the user. -avr-kern_USER_LDFLAGS = \ - # - -# Flags included by the user. -avr-kern_USER_CPPAFLAGS = \ - # - -# Flags included by the user. -avr-kern_USER_CPPFLAGS = \ - -Os -fomit-frame-pointer \ - -fno-strict-aliasing \ - -fwrapv \ - # - -# Include the mk file generated by the wizard -include examples/avr-kern/avr-kern_wiz.mk diff --git a/examples/avr-kern/avr-kern_wiz.mk b/examples/avr-kern/avr-kern_wiz.mk deleted file mode 100644 index 3f2e83ef..00000000 --- a/examples/avr-kern/avr-kern_wiz.mk +++ /dev/null @@ -1,86 +0,0 @@ -# -# Copyright 2009 Develer S.r.l. (http://www.develer.com/) -# All rights reserved. -# -# Makefile template for BeRTOS wizard. -# -# Author: Lorenzo Berni -# -# - -# Constants automatically defined by the selected modules -avr-kern_DEBUG = 1 - -# Our target application -TRG += avr-kern - -avr-kern_PREFIX = "avr-" - -avr-kern_SUFFIX = "" - -# Files automatically generated by the wizard. DO NOT EDIT, USE avr-kern_USER_CSRC INSTEAD! -avr-kern_WIZARD_CSRC = \ - bertos/kern/signal.c \ - bertos/mware/event.c \ - bertos/kern/sem.c \ - bertos/struct/heap.c \ - bertos/kern/monitor.c \ - bertos/drv/timer.c \ - bertos/cpu/avr/drv/timer_avr.c \ - bertos/kern/proc.c \ - bertos/mware/formatwr.c \ - bertos/mware/hex.c \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE avr-kern_USER_PCSRC INSTEAD! -avr-kern_WIZARD_PCSRC = \ - bertos/mware/formatwr.c \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE avr-kern_USER_CPPASRC INSTEAD! -avr-kern_WIZARD_CPPASRC = \ - bertos/cpu/avr/hw/switch_ctx_avr.S \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE avr-kern_USER_CXXSRC INSTEAD! -avr-kern_WIZARD_CXXSRC = \ - \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE avr-kern_USER_ASRC INSTEAD! -avr-kern_WIZARD_ASRC = \ - \ - # - -avr-kern_CPPFLAGS = -D'CPU_FREQ=(14745600UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -Iexamples/avr-kern/ $(avr-kern_CPU_CPPFLAGS) $(avr-kern_USER_CPPFLAGS) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -avr-kern_LDFLAGS = $(avr-kern_CPU_LDFLAGS) $(avr-kern_WIZARD_LDFLAGS) $(avr-kern_USER_LDFLAGS) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -avr-kern_CPPAFLAGS = $(avr-kern_CPU_CPPAFLAGS) $(avr-kern_WIZARD_CPPAFLAGS) $(avr-kern_USER_CPPAFLAGS) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -avr-kern_CSRC = $(avr-kern_CPU_CSRC) $(avr-kern_WIZARD_CSRC) $(avr-kern_USER_CSRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -avr-kern_PCSRC = $(avr-kern_CPU_PCSRC) $(avr-kern_WIZARD_PCSRC) $(avr-kern_USER_PCSRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -avr-kern_CPPASRC = $(avr-kern_CPU_CPPASRC) $(avr-kern_WIZARD_CPPASRC) $(avr-kern_USER_CPPASRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -avr-kern_CXXSRC = $(avr-kern_CPU_CXXSRC) $(avr-kern_WIZARD_CXXSRC) $(avr-kern_USER_CXXSRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -avr-kern_ASRC = $(avr-kern_CPU_ASRC) $(avr-kern_WIZARD_ASRC) $(avr-kern_USER_ASRC) - -# CPU specific flags and options, defined in the CPU definition files. -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -avr-kern_DEBUG_SCRIPT = bertos/prg_scripts/nodebug.sh -avr-kern_PROGRAMMER_CPU = atmega1281 -avr-kern_STOPDEBUG_SCRIPT = bertos/prg_scripts/none.sh -avr-kern_MCU = atmega1281 -avr-kern_FLASH_SCRIPT = bertos/prg_scripts/avr/flash.sh -avr-kern_STOPFLASH_SCRIPT = bertos/prg_scripts/avr/stopflash.sh -avr-kern_CPU_CPPFLAGS = -Os -Ibertos/cpu/avr/ diff --git a/examples/avr-kern/cfg/cfg_adc.h b/examples/avr-kern/cfg/cfg_adc.h deleted file mode 100644 index dd65e134..00000000 --- a/examples/avr-kern/cfg/cfg_adc.h +++ /dev/null @@ -1,110 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the ADC module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_ADC_H -#define CFG_ADC_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define ADC_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define ADC_LOG_FORMAT LOG_FMT_VERBOSE - -/** - * Clock Frequency for ADC conversion. - * - * $WIZ$ type = "int" - * $WIZ$ supports = "at91" - */ -#define CONFIG_ADC_CLOCK 4800000UL - -/** - * Minimum time for starting up a conversion [us]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 0 - * $WIZ$ supports = "at91" - */ -#define CONFIG_ADC_STARTUP_TIME 20 - -/** - * Minimum time for sample and hold [us]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 0 - * $WIZ$ supports = "at91" - */ -#define CONFIG_ADC_SHTIME 834 - -/** - * ADC Voltage Reference. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "avr_adc_refs" - * $WIZ$ supports = "avr" - */ -#define CONFIG_ADC_AVR_REF ADC_AVR_AVCC - -/** - * ADC clock divisor from main crystal. - * - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ max = 128 - * $WIZ$ supports = "avr" - */ -#define CONFIG_ADC_AVR_DIVISOR 2 - -/** - * Enable ADC strobe for debugging ADC ISR. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_ADC_STROBE 0 - -#endif /* CFG_ADC_H */ diff --git a/examples/avr-kern/cfg/cfg_afsk.h b/examples/avr-kern/cfg/cfg_afsk.h deleted file mode 100644 index d8bc1d56..00000000 --- a/examples/avr-kern/cfg/cfg_afsk.h +++ /dev/null @@ -1,114 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for AFSK1200 modem. - * - * \version $Id$ - * \author Francesco Sacchi - */ - -#ifndef CFG_AFSK_H -#define CFG_AFSK_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define AFSK_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define AFSK_LOG_FORMAT LOG_FMT_TERSE - - -/** - * AFSK discriminator filter type. - * - * $WIZ$ type = "enum"; value_list = "afsk_filter_list" - */ -#define CONFIG_AFSK_FILTER AFSK_CHEBYSHEV - - -/** - * AFSK receiver buffer length. - * - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_AFSK_RX_BUFLEN 32 - -/** - * AFSK transimtter buffer length. - * - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_AFSK_TX_BUFLEN 32 - -/** - * AFSK DAC sample rate for modem outout. - * $WIZ$ type = "int" - * $WIZ$ min = 2400 - */ -#define CONFIG_AFSK_DAC_SAMPLERATE 9600 - -/** - * AFSK RX timeout in ms, set to -1 to disable. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_AFSK_RXTIMEOUT 0 - - -/** - * AFSK Preamble length in [ms], before starting transmissions. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_AFSK_PREAMBLE_LEN 300UL - - - -/** - * AFSK Trailer length in [ms], before stopping transmissions. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_AFSK_TRAILER_LEN 50UL - -#endif /* CFG_AFSK_H */ diff --git a/examples/avr-kern/cfg/cfg_ax25.h b/examples/avr-kern/cfg/cfg_ax25.h deleted file mode 100644 index 64f862f1..00000000 --- a/examples/avr-kern/cfg/cfg_ax25.h +++ /dev/null @@ -1,76 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the AX25 protocol module. - * - * \version $Id$ - * \author Francesco Sacchi - */ - -#ifndef CFG_AX25_H -#define CFG_AX25_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define AX25_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define AX25_LOG_FORMAT LOG_FMT_TERSE - -/** - * AX25 frame buffer lenght. - * - * $WIZ$ type = "int" - * $WIZ$ min = 18 - */ -#define CONFIG_AX25_FRAME_BUF_LEN 330 - - -/** - * Enable repeaters listing in AX25 frames. - * If enabled use 56 addtional bytes of RAM - * for each message received. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_AX25_RPT_LST 1 - -#endif /* CFG_AX25_H */ diff --git a/examples/avr-kern/cfg/cfg_battfs.h b/examples/avr-kern/cfg/cfg_battfs.h deleted file mode 100644 index fb438a08..00000000 --- a/examples/avr-kern/cfg/cfg_battfs.h +++ /dev/null @@ -1,68 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for BattFS module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_BATTFS_H -#define CFG_BATTFS_H - - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define BATTFS_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define BATTFS_LOG_FORMAT LOG_FMT_VERBOSE - -/** - * Set to 1 to enable free page shuffling. - * This increase memories life but makes debugging - * more difficult due to its unrepeteable state. - * $WIZ$ type = "boolean" - */ -#define CONFIG_BATTFS_SHUFFLE_FREE_PAGES 0 - - -#endif /* BATTFS */ diff --git a/examples/avr-kern/cfg/cfg_dataflash.h b/examples/avr-kern/cfg/cfg_dataflash.h deleted file mode 100644 index 8bd7828a..00000000 --- a/examples/avr-kern/cfg/cfg_dataflash.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for data flash memory module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_DATAFLASH_H -#define CFG_DATAFLASH_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define DATAFLASH_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define DATAFLASH_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_DATAFLASH_H */ diff --git a/examples/avr-kern/cfg/cfg_dc_motor.h b/examples/avr-kern/cfg/cfg_dc_motor.h deleted file mode 100644 index 409badda..00000000 --- a/examples/avr-kern/cfg/cfg_dc_motor.h +++ /dev/null @@ -1,67 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for DC motor module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_DC_MOTOR_H -#define CFG_DC_MOTOR_H - -/** - * Number of the DC motors to manage. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NUM_DC_MOTOR 4 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define DC_MOTOR_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define DC_MOTOR_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_DC_MOTOR_H */ diff --git a/examples/avr-kern/cfg/cfg_debug.h b/examples/avr-kern/cfg/cfg_debug.h deleted file mode 100644 index b0136259..00000000 --- a/examples/avr-kern/cfg/cfg_debug.h +++ /dev/null @@ -1,55 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for Debug module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_DEBUG_H -#define CFG_DEBUG_H - -/** - * Debug console port. - * $WIZ$ type = "int"; min = 0 - */ -#define CONFIG_KDEBUG_PORT 1 - -/** - * Baudrate for the debug console. - * $WIZ$ type = "int"; min = 300 - */ -#define CONFIG_KDEBUG_BAUDRATE 115200UL - -#endif /* CFG_DEBUG_H */ diff --git a/examples/avr-kern/cfg/cfg_fat.h b/examples/avr-kern/cfg/cfg_fat.h deleted file mode 100644 index d418b783..00000000 --- a/examples/avr-kern/cfg/cfg_fat.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for Fat module. - * - * \version $Id$ - * - * \author Luca Ottaviano - * \author Francesco Sacchi - */ - -#ifndef CFG_FAT_H -#define CFG_FAT_H - -/** - * Use word alignment to access FAT structure. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_WORD_ACCESS 0 -#define _WORD_ACCESS CONFIG_FAT_WORD_ACCESS - -/** - * Enable read functions only. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_FS_READONLY 0 -#define _FS_READONLY CONFIG_FAT_FS_READONLY - -/** - * Minimization level to remove some functions. - * $WIZ$ type = "int"; min = 0; max = 3 - */ -#define CONFIG_FAT_FS_MINIMIZE 0 -#define _FS_MINIMIZE CONFIG_FAT_FS_MINIMIZE - -/** - * If enabled, this reduces memory consumption 512 bytes each file object by using a shared buffer. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_FS_TINY 1 -#define _FS_TINY CONFIG_FAT_FS_TINY - -/** - * To enable string functions, set _USE_STRFUNC to 1 or 2. - * $WIZ$ type = "int" - * $WIZ$ supports = "False" - */ -#define CONFIG_FAT_USE_STRFUNC 0 -#define _USE_STRFUNC CONFIG_FAT_USE_STRFUNC - -/** - * Enable f_mkfs function. Requires CONFIG_FAT_FS_READONLY = 0. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_USE_MKFS 0 -#define _USE_MKFS (CONFIG_FAT_USE_MKFS && !CONFIG_FAT_FS_READONLY) - -/** - * Enable f_forward function. Requires CONFIG_FAT_FS_TINY. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_USE_FORWARD 0 -#define _USE_FORWARD (CONFIG_FAT_USE_FORWARD && CONFIG_FAT_FS_TINY) - -/** - * Number of volumes (logical drives) to be used. - * $WIZ$ type = "int"; min = 1; max = 255 - */ -#define CONFIG_FAT_DRIVES 1 -#define _DRIVES CONFIG_FAT_DRIVES - -/** - * Maximum sector size to be handled. (512/1024/2048/4096). - * 512 for memory card and hard disk, 1024 for floppy disk, 2048 for MO disk - * $WIZ$ type = "int"; min = 512; max = 4096 - */ -#define CONFIG_FAT_MAX_SS 512 -#define _MAX_SS CONFIG_FAT_MAX_SS - -/** - * When _MULTI_PARTITION is set to 0, each volume is bound to the same physical - * drive number and can mount only first primaly partition. When it is set to 1, - * each volume is tied to the partitions listed in Drives[]. - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_FAT_MULTI_PARTITION 0 -#define _MULTI_PARTITION CONFIG_FAT_MULTI_PARTITION - -/** - * Specifies the OEM code page to be used on the target system. - * $WIZ$ type = "int" - */ -#define CONFIG_FAT_CODE_PAGE 850 -#define _CODE_PAGE CONFIG_FAT_CODE_PAGE - -/** - * Support for long filenames. Enable only if you have a valid Microsoft license. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_USE_LFN 0 -#define _USE_LFN CONFIG_FAT_USE_LFN - -/** - * Maximum Long File Name length to handle. - * $WIZ$ type = "int"; min = 8; max = 255 - */ -#define CONFIG_FAT_MAX_LFN 255 -#define _MAX_LFN CONFIG_FAT_MAX_LFN - -#endif /* CFG_FAT_H */ diff --git a/examples/avr-kern/cfg/cfg_flash25.h b/examples/avr-kern/cfg/cfg_flash25.h deleted file mode 100644 index f7ff219b..00000000 --- a/examples/avr-kern/cfg/cfg_flash25.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for flash25 module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_FLASH25_H -#define CFG_FLASH25_H - -/** - * Eeprom memory type. - * - *$WIZ$ type = "enum" - *$WIZ$ value_list = "flash25_list" - */ -#define CONFIG_FLASH25 FLASH25_AT25F2048 - -#endif /* CFG_FALSH25_H */ - diff --git a/examples/avr-kern/cfg/cfg_formatwr.h b/examples/avr-kern/cfg/cfg_formatwr.h deleted file mode 100644 index 10d41b48..00000000 --- a/examples/avr-kern/cfg/cfg_formatwr.h +++ /dev/null @@ -1,67 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for formatted write module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_FORMATWR_H -#define CFG_FORMATWR_H - -/** - * printf()-style formatter configuration. - * $WIZ$ type = "enum"; value_list = "printf_list" - * - * \sa PRINTF_DISABLED - * \sa PRINTF_NOMODIFIERS - * \sa PRINTF_REDUCED - * \sa PRINTF_NOFLOAT - * \sa PRINTF_FULL - */ -#define CONFIG_PRINTF PRINTF_FULL - -/** - * Size of buffer to format "%" sequences in printf. - * - * Warning: no check on buffer size is done when formatting, be careful especially - * with big numbers and %f formatting. - * - * $WIZ$ type = "int" - * $WIZ$ min = 4 - */ -#define CONFIG_FRMWRI_BUFSIZE 134 - -#endif /* CFG_FORMATWR_H */ - diff --git a/examples/avr-kern/cfg/cfg_i2c.h b/examples/avr-kern/cfg/cfg_i2c.h deleted file mode 100644 index af36e6b6..00000000 --- a/examples/avr-kern/cfg/cfg_i2c.h +++ /dev/null @@ -1,90 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for I2C module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_I2C_H -#define CFG_I2C_H - -/** -*Comunication frequency. -* -* $WIZ$ type = "int" -*/ -#define CONFIG_I2C_FREQ 100000UL - -/** - * I2C start timeout. - * For how many milliseconds the i2c_start - * should try to get an ACK before - * returning error. - * - * $WIZ$ type = "int" - */ -#define CONFIG_I2C_START_TIMEOUT 100 - -/** - * I2C backend the driver should use. - * - * I2C_BACKEND_BUILTIN: Use (if present) the builtin i2c hardware. - * I2C_BACKEND_BITBANG: Use the emulated bitbang driver. - * \see drv/i2c.h for more information. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "i2c_backend" - */ -#define CONFIG_I2C_BACKEND I2C_BACKEND_BUILTIN - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define I2C_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define I2C_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_I2C_H */ - - diff --git a/examples/avr-kern/cfg/cfg_i2s.h b/examples/avr-kern/cfg/cfg_i2s.h deleted file mode 100644 index 52fa8848..00000000 --- a/examples/avr-kern/cfg/cfg_i2s.h +++ /dev/null @@ -1,75 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for I2S module. - * - * \version $Id$ - * - * \author Luca Ottaviano - */ - -#ifndef CFG_I2S_H -#define CFG_I2S_H - -/** - * Length of each play buffer. - * - * $WIZ$ type = "int" - */ -#define CONFIG_PLAY_BUF_LEN 8192 - -/** - * Sampling frequency of the audio file. - * - * $WIZ$ type = "int" - * $WIZ$ min = 32000 - * $WIZ$ max = 192000 - */ -#define CONFIG_SAMPLE_FREQ 44100UL - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define I2S_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define I2S_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_I2S_H */ diff --git a/examples/avr-kern/cfg/cfg_ini_reader.h b/examples/avr-kern/cfg/cfg_ini_reader.h deleted file mode 100644 index 702c78ee..00000000 --- a/examples/avr-kern/cfg/cfg_ini_reader.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for ini reader module. - * - * \version $Id$ - * - * \author Luca Ottaviano - */ - -#ifndef CFG_INI_READER_H -#define CFG_INI_READER_H - -/** - * Maximum ini file line length (chars). - * $WIZ$ type = "int"; min = 1 - */ -#define CONFIG_INI_MAX_LINE_LEN 64 - -#endif /* CFG_INI_READER_H */ diff --git a/examples/avr-kern/cfg/cfg_kbd.h b/examples/avr-kern/cfg/cfg_kbd.h deleted file mode 100644 index 116f3318..00000000 --- a/examples/avr-kern/cfg/cfg_kbd.h +++ /dev/null @@ -1,59 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for keyboard module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_KBD_H -#define CFG_KBD_H - -/// Keyboard polling method. $WIZ$ supports = "False" -#define CONFIG_KBD_POLL KBD_POLL_SOFTINT - -/// Enable keyboard event delivery to observers. $WIZ$ type = "boolean" -#define CONFIG_KBD_OBSERVER 0 - -/// Enable key beeps. $WIZ$ type = "boolean" -#define CONFIG_KBD_BEEP 0 - -/// Enable long pression handler for keys. $WIZ$ type = "boolean" -#define CONFIG_KBD_LONGPRESS 0 - -/// Enable calling poor man's scheduler to be called inside kbd_peek. $WIZ$ type = "boolean" -#define CONFIG_KBD_SCHED 0 - -#endif /* CFG_KBD_H */ - diff --git a/examples/avr-kern/cfg/cfg_kfile.h b/examples/avr-kern/cfg/cfg_kfile.h deleted file mode 100644 index 291a3881..00000000 --- a/examples/avr-kern/cfg/cfg_kfile.h +++ /dev/null @@ -1,62 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for KFile interface module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_KFILE_H -#define CFG_KFILE_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KFILE_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KFILE_LOG_FORMAT LOG_FMT_TERSE - -/** - * Enable the gets function with echo. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KFILE_GETS 0 - -#endif /* CFG_KFILE_H */ diff --git a/examples/avr-kern/cfg/cfg_lcd.h b/examples/avr-kern/cfg/cfg_lcd.h deleted file mode 100644 index 903ae9aa..00000000 --- a/examples/avr-kern/cfg/cfg_lcd.h +++ /dev/null @@ -1,72 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for lcd display module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_LCD_H -#define CFG_LCD_H - -/** - * Use 4 bit addressing mode. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_4BIT 0 - -/** - * Use a table to speed up LCD memory addressing. - * This will use about 100 bytes of RAM. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_ADDRESS_FAST 1 - -/** - * LCD setting for 32122A (AVR implementation). - * $WIZ$ type = "boolean" - * $WIZ$ supports = "avr and False" - */ -#define CONFIG_LCD_SOFTINT_REFRESH 0 - -/** - * LCD setting for 32122A (AVR implementation). - * $WIZ$ type = "boolean" - * $WIZ$ supports = "avr and False" - */ -#define CONFIG_LCD_WAIT 1 - - -#endif /* CFG_LCD_H */ - diff --git a/examples/avr-kern/cfg/cfg_lm75.h b/examples/avr-kern/cfg/cfg_lm75.h deleted file mode 100644 index 91b347ad..00000000 --- a/examples/avr-kern/cfg/cfg_lm75.h +++ /dev/null @@ -1,57 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the LM75 sensor temperature. - * - * \author Daniele Basile - */ - -#ifndef CFG_LM75_H -#define CFG_LM75_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define LM75_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define LM75_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_AX25_H */ diff --git a/examples/avr-kern/cfg/cfg_md2.h b/examples/avr-kern/cfg/cfg_md2.h deleted file mode 100644 index 22ec7dbe..00000000 --- a/examples/avr-kern/cfg/cfg_md2.h +++ /dev/null @@ -1,54 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for MD2 module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_MD2_H -#define CFG_MD2_H - -/** - * Size of block for MD2 algorithm. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_MD2_BLOCK_LEN 16 - -/// Use standard permutation in MD2 algorithm. $WIZ$ type = "boolean" -#define CONFIG_MD2_STD_PERM 0 - -#endif /* CFG_MD2_H */ - diff --git a/examples/avr-kern/cfg/cfg_monitor.h b/examples/avr-kern/cfg/cfg_monitor.h deleted file mode 100644 index 6391b407..00000000 --- a/examples/avr-kern/cfg/cfg_monitor.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Kernel monitor configuration parameters - * - * \version $Id$ - * \author Bernie Innocenti - */ - -#ifndef CFG_MONITOR_H -#define CFG_MONITOR_H - -/** - * Process monitor. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_MONITOR 1 - -#endif /* CFG_MONITOR_H */ diff --git a/examples/avr-kern/cfg/cfg_nmea.h b/examples/avr-kern/cfg/cfg_nmea.h deleted file mode 100644 index 9249a9af..00000000 --- a/examples/avr-kern/cfg/cfg_nmea.h +++ /dev/null @@ -1,85 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for NMEA module. - * - * \author Daniele Basile - */ - -#ifndef CFG_NMEA_H -#define CFG_NMEA_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define NMEA_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define NMEA_LOG_FORMAT LOG_FMT_TERSE - - -/** - * Maximum number of sentence parsers supported. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NMEAP_MAX_SENTENCES 8 - -/** - * Max length of a complete sentence. The standard says 82 bytes, but its probably - * better to go at least 128 since some units don't adhere to the 82 bytes - * especially for proprietary sentences. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NMEAP_MAX_SENTENCE_LENGTH 255 - -/** - * Max tokens in one sentence. 24 is enough for any standard sentence. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NMEAP_MAX_TOKENS 24 - -#endif /* CFG_NMEA_H */ - diff --git a/examples/avr-kern/cfg/cfg_phase.h b/examples/avr-kern/cfg/cfg_phase.h deleted file mode 100644 index 57202930..00000000 --- a/examples/avr-kern/cfg/cfg_phase.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for phase module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_PHASE_H -#define CFG_PHASE_H - -/** - * Max value of the duty cycle on triac. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_TRIAC_MAX_DUTY 100 - -/** - * Max value of the triac power. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_TRIAC_MAX_POWER 100 - -#endif /* CFG_PHASE_H */ diff --git a/examples/avr-kern/cfg/cfg_pocketbus.h b/examples/avr-kern/cfg/cfg_pocketbus.h deleted file mode 100644 index 687e535d..00000000 --- a/examples/avr-kern/cfg/cfg_pocketbus.h +++ /dev/null @@ -1,50 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for pocketbus module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_POCKETBUS_H -#define CFG_POCKETBUS_H - -/** - *Buffer len for pockebus protocol. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_POCKETBUS_BUFLEN 128 - -#endif /* CFG_POCKETBUS_H */ diff --git a/examples/avr-kern/cfg/cfg_proc.h b/examples/avr-kern/cfg/cfg_proc.h deleted file mode 100644 index 1afc1439..00000000 --- a/examples/avr-kern/cfg/cfg_proc.h +++ /dev/null @@ -1,108 +0,0 @@ -/** - * \file - * - * - * \brief Kernel configuration parameters - * - * \version $Id$ - * \author Bernie Innocenti - */ - -#ifndef CFG_PROC_H -#define CFG_PROC_H - -/** - * Enable the multithreading kernel. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN 1 - -/** - * Kernel interrupt supervisor. WARNING: Experimental, still incomplete! - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_KERN_IRQ 0 - -/** - * Dynamic memory allocation for processes. - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "heap" - */ -#define CONFIG_KERN_HEAP 1 - -/** - * Size of the dynamic memory pool used by processes. - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_KERN_HEAP_SIZE 5120L - -/** - * Preemptive process scheduling. - * - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "timer" - */ -#define CONFIG_KERN_PREEMPT 1 - -/** - * Priority-based scheduling policy. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_PRI 1 - -/** - * Time sharing quantum (a prime number prevents interference effects) [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_KERN_QUANTUM 11 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KERN_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KERN_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PROC_H */ diff --git a/examples/avr-kern/cfg/cfg_pwm.h b/examples/avr-kern/cfg/cfg_pwm.h deleted file mode 100644 index 6627ee2d..00000000 --- a/examples/avr-kern/cfg/cfg_pwm.h +++ /dev/null @@ -1,57 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for PWM module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_PWM_H -#define CFG_PWM_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define PWM_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define PWM_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PWM_H */ diff --git a/examples/avr-kern/cfg/cfg_ramp.h b/examples/avr-kern/cfg/cfg_ramp.h deleted file mode 100644 index 1aeb8a89..00000000 --- a/examples/avr-kern/cfg/cfg_ramp.h +++ /dev/null @@ -1,116 +0,0 @@ - /** - * \file - * - * - * \brief Configuration file Ramp algorithm module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_RAMP_H -#define CFG_RAMP_H - -/** - * Define whether the ramp will use floating point calculation within ramp_evaluate(). - * Otherwise, a less precise fixed point version will be used, which is faster on - * platforms which do no support floating point operations. - * - * \note Floating point operations will be always done within ramp_compute() to - * precalculate values, so there has to be at least a floating point emulation support. - * - * $WIZ$ type = "boolean" - */ -#define RAMP_USE_FLOATING_POINT 0 - - -#if !RAMP_USE_FLOATING_POINT - - /** - * Number of least-significant bits which are stripped away during ramp evaluation. - * This setting allows to specify larger ramps at the price of less precision. - * - * The maximum ramp size allowed is 2^(24 + RAMP_CLOCK_SHIFT_PRECISION), in clocks. - * For instance, using RAMP_CLOCK_SHIFT_PRECISION 1, and a 8x prescaler, the maximum - * length of a ramp is about 6.7 secs. Raising RAMP_CLOCK_SHIFT_PRECISION to 2 - * brings the maximum length to 13.4 secs, at the price of less precision. - * - * ramp_compute() will check that the length is below the maximum allowed through - * a runtime assertion. - * - * \note This macro is used only for the fixed-point version of the ramp. - * $WIZ$ type = "int" - * $WIZ$ min = 0 - * $WIZ$ max = 32 - */ - #define RAMP_CLOCK_SHIFT_PRECISION 2 -#endif - - -/** -* Negative pulse width for ramp. -* $WIZ$ type = "int" -* $WIZ$ min = 1 -*/ -#define RAMP_PULSE_WIDTH 50 - -/** - * Default ramp time (microsecs). - * $WIZ$ type = "int" - * $WIZ$ min = 1000 - */ -#define RAMP_DEF_TIME 6000000UL -/** - * Default ramp maxfreq (Hz). - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define RAMP_DEF_MAXFREQ 5000 -/** - * Default ramp minfreq (Hz). - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define RAMP_DEF_MINFREQ 200 -/** - * Default ramp powerrun (deciampere). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define RAMP_DEF_POWERRUN 10 -/** - * Default ramp poweridle (Hz). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define RAMP_DEF_POWERIDLE 1 - -#endif /* CFG_RAMP_H */ diff --git a/examples/avr-kern/cfg/cfg_randpool.h b/examples/avr-kern/cfg/cfg_randpool.h deleted file mode 100644 index 83285984..00000000 --- a/examples/avr-kern/cfg/cfg_randpool.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for randpool module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_RANDPOOL_H -#define CFG_RANDPOOL_H - - -/** - * Define a size, in byte, of entropy pool. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_SIZE_ENTROPY_POOL 64 - -/// Enable timer in randpool algo. $WIZ$ type = "boolean" -#define CONFIG_RANDPOOL_TIMER 1 - -#endif /* CFG_RANDPOOL_H */ - - diff --git a/examples/avr-kern/cfg/cfg_sem.h b/examples/avr-kern/cfg/cfg_sem.h deleted file mode 100644 index 86ed110d..00000000 --- a/examples/avr-kern/cfg/cfg_sem.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Kernel semaphores configuration parameters. - * - * \version $Id$ - * \author Bernie Innocenti - */ - -#ifndef CFG_SEM_H -#define CFG_SEM_H - -/** - * Re-entrant mutual exclusion primitives. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SEMAPHORES 1 - -#endif /* CFG_SEM_H */ diff --git a/examples/avr-kern/cfg/cfg_ser.h b/examples/avr-kern/cfg/cfg_ser.h deleted file mode 100644 index 81332806..00000000 --- a/examples/avr-kern/cfg/cfg_ser.h +++ /dev/null @@ -1,192 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for serial module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_SER_H -#define CFG_SER_H - -/** - * Example of setting for serial port and - * spi port. - * Edit these define for your project. - */ - -/** - * Size of the outbound FIFO buffer for port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_UART0_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_UART0_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91 and not atmega8 and not atmega168 and not atmega32" - */ -#define CONFIG_UART1_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91 and not atmega8 and not atmega168 and not atmega32" - */ -#define CONFIG_UART1_RXBUFSIZE 32 - - -/** - * Size of the outbound FIFO buffer for SPI port [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for SPI port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI0_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI0_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for SPI port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI1_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI1_RXBUFSIZE 32 - -/** - * SPI data order. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_order_bit" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST - -/** - * SPI clock division factor. - * $WIZ$ type = "int" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_DIV 16 - -/** - * SPI clock polarity: normal low or normal high. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_spi_pol" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW - -/** - * SPI clock phase you can choose sample on first edge or - * sample on second clock edge. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_spi_phase" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE - -/** - * Default transmit timeout (ms). Set to -1 to disable timeout support. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_SER_TXTIMEOUT -1 - -/** - * Default receive timeout (ms). Set to -1 to disable timeout support. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_SER_RXTIMEOUT -1 - -/** - * Use RTS/CTS handshake. - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_SER_HWHANDSHAKE 0 - -/** - * Default baudrate for all serial ports (set to 0 to disable). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_SER_DEFBAUDRATE 0UL - -/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean" -#define CONFIG_SER_STROBE 0 - -#endif /* CFG_SER_H */ diff --git a/examples/avr-kern/cfg/cfg_signal.h b/examples/avr-kern/cfg/cfg_signal.h deleted file mode 100644 index ed85119b..00000000 --- a/examples/avr-kern/cfg/cfg_signal.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Kernel signals configuration parameters - * - * \version $Id$ - * \author Bernie Innocenti - */ - -#ifndef CFG_SIGNAL_H -#define CFG_SIGNAL_H - -/** - * Inter-process signals. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SIGNALS 1 - -#endif /* CFG_SIGNAL_H */ diff --git a/examples/avr-kern/cfg/cfg_spi_bitbang.h b/examples/avr-kern/cfg/cfg_spi_bitbang.h deleted file mode 100644 index 6e9a96bc..00000000 --- a/examples/avr-kern/cfg/cfg_spi_bitbang.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for SPI bitbang module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_SPI_BITBANG_H -#define CFG_SPI_BITBANG_H - -/** - * Set data order for emulated SPI. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ordet_bit_list" - */ -#define CONFIG_SPI_DATAORDER SPI_LSB_FIRST - -#endif /* CFG_SPI_BITBANG_H */ - diff --git a/examples/avr-kern/cfg/cfg_stepper.h b/examples/avr-kern/cfg/cfg_stepper.h deleted file mode 100644 index e086065c..00000000 --- a/examples/avr-kern/cfg/cfg_stepper.h +++ /dev/null @@ -1,70 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for stepper motor module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_STEPPER_H -#define CFG_STEPPER_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define STEPPER_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define STEPPER_LOG_FORMAT LOG_FMT_TERSE - -/** - * Max number of the stepper motor. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NUM_STEPPER_MOTORS 6 - -/** - * Max number of the timer usable on target to drive stepper motor. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_TC_STEPPER_MAX_NUM 6 - -#endif /* CFG_STEPPER_H */ diff --git a/examples/avr-kern/cfg/cfg_tas5706a.h b/examples/avr-kern/cfg/cfg_tas5706a.h deleted file mode 100644 index e1112c0f..00000000 --- a/examples/avr-kern/cfg/cfg_tas5706a.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the TAS5706A module. - * - * \version $Id$ - * \author Luca Ottaviano - */ - -#ifndef CFG_TAS5706A_H -#define CFG_TAS5706A_H - -/** - * Maximum output volume for TAS chip [dB]. - * - * $WIZ$ type = "int" - * $WIZ$ min = -100 - * $WIZ$ max = 24 - */ -#define CONFIG_TAS_MAX_VOL -39 - -#endif /* CFG_TAS5706A_H */ diff --git a/examples/avr-kern/cfg/cfg_thermo.h b/examples/avr-kern/cfg/cfg_thermo.h deleted file mode 100644 index e68c6371..00000000 --- a/examples/avr-kern/cfg/cfg_thermo.h +++ /dev/null @@ -1,58 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for thermo module. - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef CFG_THERMO_H -#define CFG_THERMO_H - -/** - * Interval at which thermo control is performed [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_THERMO_INTERVAL_MS 100 - -/** - * Number of different samples we interpolate over to get the hifi temperature. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_THERMO_HIFI_NUM_SAMPLES 10 - -#endif /* CFG_THERMO_H */ diff --git a/examples/avr-kern/cfg/cfg_timer.h b/examples/avr-kern/cfg/cfg_timer.h deleted file mode 100644 index 1cff78b8..00000000 --- a/examples/avr-kern/cfg/cfg_timer.h +++ /dev/null @@ -1,68 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for timer module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_TIMER_H -#define CFG_TIMER_H - -/** - * Hardware timer selection for drv/timer.c. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "timer_select" - */ -#define CONFIG_TIMER TIMER_DEFAULT - -/** - * Debug timer interrupt using a strobe pin. - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_STROBE 0 - -/** - * Enable asynchronous timers. - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_EVENTS 1 - -/** - * Support hi-res timer_usleep(). - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_UDELAY 1 - -#endif /* CFG_TIMER_H */ diff --git a/examples/avr-kern/cfg/cfg_wdt.h b/examples/avr-kern/cfg/cfg_wdt.h deleted file mode 100644 index 9f4caae9..00000000 --- a/examples/avr-kern/cfg/cfg_wdt.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for watchdog module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_WDT_H -#define CFG_WDT_H - -/// Enable watchdog timer. $WIZ$ type = "autoenabled" -#define CONFIG_WATCHDOG 0 - -#endif /* CFG_WDT_H */ - - diff --git a/examples/avr-kern/cfg/cfg_xmodem.h b/examples/avr-kern/cfg/cfg_xmodem.h deleted file mode 100644 index eb8897f4..00000000 --- a/examples/avr-kern/cfg/cfg_xmodem.h +++ /dev/null @@ -1,67 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for xmodem module. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef CFG_XMODEM_H -#define CFG_XMODEM_H - -/// Enable Rx. $WIZ$ type = "boolean" -#define CONFIG_XMODEM_RECV 1 - -/// Enable TX. $WIZ$ type = "boolean" -#define CONFIG_XMODEM_SEND 1 - -/// Allow a Rx/Tx of 1Kbyte block. $WIZ$ type = "boolean" -#define CONFIG_XMODEM_1KCRC 1 - -/** - * Max retries before giving up. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_XMODEM_MAXRETRIES 15 - -/** - * Max retries before switching to BCC. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_XMODEM_MAXCRCRETRIES 7 - -#endif /* CFG_XMODEM_H */ - diff --git a/examples/avr-kern/hw/hw_afsk.h b/examples/avr-kern/hw/hw_afsk.h deleted file mode 100644 index ec9b8be2..00000000 --- a/examples/avr-kern/hw/hw_afsk.h +++ /dev/null @@ -1,87 +0,0 @@ -/** - * \file - * - * - * \brief AFSK modem hardware-specific definitions. - * - * \version $Id$ - * - * \author Francesco Sacchi - */ - -#ifndef HW_AFSK_H -#define HW_AFSK_H - -#include "cfg/cfg_arch.h" - -#warning TODO:This is an example implementation, you must implement it! - -/** - * Initialize the specified channel of the ADC for AFSK needs. - * The adc should be configured to have a continuos stream of convertions. - * For every convertion there must be an ISR that read the sample - * and call afsk_adc_isr(), passing the context and the sample. - * - * \param ch channel to be used for AFSK demodulation. - * \param ctx AFSK context (\see Afsk). This parameter must be saved and - * passed back to afsk_adc_isr() for every convertion. - */ -#define AFSK_ADC_INIT(ch, ctx) do { (void)ch, (void)ctx; } while (0) - -#define AFSK_STROBE_INIT() do { /* Implement me */ } while (0) -#define AFSK_STROBE_ON() do { /* Implement me */ } while (0) -#define AFSK_STROBE_OFF() do { /* Implement me */ } while (0) - -/** - * Initialize the specified channel of the DAC for AFSK needs. - * The DAC has to be configured in order to call an ISR for every sample sent. - * The DAC doesn't have to start the IRQ immediatly but have to wait - * the AFSK driver to call AFSK_DAC_IRQ_START(). - * The ISR must then call afsk_dac_isr() passing the AFSK context. - * \param ch DAC channel to be used for AFSK modulation. - * \param ctx AFSK context (\see Afsk). This parameter must be saved and - * passed back to afsk_dac_isr() for every convertion. - */ -#define AFSK_DAC_INIT(ch, ctx) do { (void)ch, (void)ctx; } while (0) - -/** - * Start DAC convertions on channel \a ch. - * \param ch DAC channel. - */ -#define AFSK_DAC_IRQ_START(ch) do { (void)ch; /* Implement me */ } while (0) - -/** - * Stop DAC convertions on channel \a ch. - * \param ch DAC channel. - */ -#define AFSK_DAC_IRQ_STOP(ch) do { (void)ch; /* Implement me */ } while (0) - -#endif /* HW_AFSK_H */ diff --git a/examples/avr-kern/hw/hw_buzzer.h b/examples/avr-kern/hw/hw_buzzer.h deleted file mode 100644 index 858ecbfb..00000000 --- a/examples/avr-kern/hw/hw_buzzer.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - * \file - * - * - * \brief Buzzer hardware-specific definitions - * - * \version $Id$ - * - * \author Francesco Sacchi - */ - -#ifndef HW_BUZZER_H -#define HW_BUZZER_H - -#warning TODO:This is an example implementation, you must implement it! - -#define BUZZER_BIT 1 -#define IS_BUZZER_ON 0 -#define BUZZER_HW_INIT do { /* Implement me! */ } while (0) -#define BUZZER_ON do { /* Implement me! */ } while (0) -#define BUZZER_OFF do { /* Implement me! */ } while (0) - -#endif /* HW_BUZZER_H */ diff --git a/examples/avr-kern/hw/hw_dataflash.c b/examples/avr-kern/hw/hw_dataflash.c deleted file mode 100644 index 844dd922..00000000 --- a/examples/avr-kern/hw/hw_dataflash.c +++ /dev/null @@ -1,126 +0,0 @@ -/** - * \file - * - * - * \brief Dataflash HW control routines. - * - * \version $Id$ - * \author Francesco Sacchi - */ - -#include "hw/hw_dataflash.h" - -#include -#include -#include - -#warning TODO:This is an example implementation, you must implement it! - -MOD_DEFINE(hw_dataflash); - -/** - * Data flash init function. - * - * This function provide to initialize all that - * needs to drive a dataflash memory. - * Generaly needs to init pins to drive a CS line - * and reset line. - */ -void dataflash_hw_init(void) -{ - - //Disable CS line (remove if not needed) - dataflash_hw_setCS(false); - - /* - * Put here your code! - * - * Note: - * - if you drive manualy CS line, here init a CS pin - * - if you use a dedicated reset line, here init a reset pin - */ - - MOD_INIT(hw_dataflash); -} - -/** - * Chip Select drive. - * - * This function enable or disable a CS line. - * You must implement this function comply to a dataflash - * memory datasheet to allow the drive to enable a memory - * when \p enable flag is true, and disable it when is false. - */ -void dataflash_hw_setCS(bool enable) -{ - if (enable) - { - /* - * Put here your code to enable - * dataflash memory - */ - } - else - { - /* - * Put here your code to disable - * dataflash memory - */ - } -} - -/** - * Reset data flash memory. - * - * This function provide to send reset signal to - * dataflash memory. You must impement it comly to a dataflash - * memory datasheet to allow the drive to set a reset pin - * when \p enable flag is true, and disable it when is false. - * - */ -void dataflash_hw_setReset(bool enable) -{ - if (enable) - { - /* - * Put here your code to set reset of - * dataflash memory - */ - } - else - { - /* - * Put here your code to clear reset of - * dataflash memory - */ - } -} - diff --git a/examples/avr-kern/hw/hw_dataflash.h b/examples/avr-kern/hw/hw_dataflash.h deleted file mode 100644 index 5254446b..00000000 --- a/examples/avr-kern/hw/hw_dataflash.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Dataflash HW control routines (interface). - * - * \version $Id$ - * \author Francesco Sacchi - */ - -#ifndef HW_DATAFLASH_H -#define HW_DATAFLASH_H - -#include - -void dataflash_hw_init(void); -void dataflash_hw_setCS(bool enable); -void dataflash_hw_setReset(bool enable); - -#endif /* HW_DATAFLASH_H */ diff --git a/examples/avr-kern/hw/hw_dc_motor.h b/examples/avr-kern/hw/hw_dc_motor.h deleted file mode 100644 index 8b8dd4b4..00000000 --- a/examples/avr-kern/hw/hw_dc_motor.h +++ /dev/null @@ -1,85 +0,0 @@ -/** - * \file - * - * - * \brief DC motor hardware-specific definitions - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef HW_DC_MOTOR_H -#define HW_DC_MOTOR_H - -typedef enum MotorDCMap -{ - - /* Put here motor dc declaration */ - MOTOR_DC_CNT - -} MotorDCMap; - -/* - * Init all pin and device to manage dc motor. - */ -#define MOTOR_DC_INIT() \ - do { \ - /* Implement me! */ \ - } while (0) - - -/* - * Enable DC motor. - */ -#define DC_MOTOR_ENABLE(dev) \ - do { \ - /* Implement me! */ \ - } while (0) - -/* - * Disable DC motor. - */ -#define DC_MOTOR_DISABLE(dev) \ - do { \ - /* Implement me! */ \ - } while (0) - -/* - * Set direction for DC motor. - */ -#define DC_MOTOR_SET_DIR(dev, dir) \ - do { \ - /* Implement me! */ \ - } while (0) - - -#endif /* HW_DC_MOTOR_H */ diff --git a/examples/avr-kern/hw/hw_ft245rl.h b/examples/avr-kern/hw/hw_ft245rl.h deleted file mode 100644 index cc0c8193..00000000 --- a/examples/avr-kern/hw/hw_ft245rl.h +++ /dev/null @@ -1,65 +0,0 @@ -/** - * \file - * - * - * \brief FT245RL USB interface hardware-specific definitions - * - * \version $Id$ - * - * \author Francesco Sacchi - */ - -#ifndef HW_FT245RL_H -#define HW_FT245RL_H - -#warning TODO:This is an example implementation, you must implement it! - -#define FT245RL_DATA_IN() /* Implement me! */ -#define FT245RL_DATA_OUT() /* Implement me! */ -#define WR_HI /* Implement me! */ -#define WR_LO /* Implement me! */ - -#define RD_HI /* Implement me! */ -#define RD_LO /* Implement me! */ - -#define FT245RL_INIT() \ -do \ -{ \ - /* Implement me! */ \ -} while(0) - -#define FT245RL_DATA_RDY() (/* Implement me! */ false) -#define FT245RL_GETDATA() ({/* Implement me! */ (0);}) -#define FT245RL_TX_ALLOWED() (/* Implement me! */ false) -#define FT245RL_SETDATA(data) do {/* Implement me! */ (void)((data)); } while(0) - -#endif /* HW_FT245RL_H */ - diff --git a/examples/avr-kern/hw/hw_i2c_bitbang.h b/examples/avr-kern/hw/hw_i2c_bitbang.h deleted file mode 100644 index 4822af7c..00000000 --- a/examples/avr-kern/hw/hw_i2c_bitbang.h +++ /dev/null @@ -1,66 +0,0 @@ -/** - * \file - * - * - * \brief Macro for I2C bitbang operation. - * - * - * \version $Id$ - * - * \author Francesco Sacchi - */ - -#ifndef HW_I2C_BITBANG_H -#define HW_I2C_BITBANG_H - -#warning TODO:This is an example implementation, you must implement it! - -#define SDA_HI do { /* Implement me:Set SDA High by setting SDA pin as input */ } while (0) -#define SDA_LO do { /* Implement me:Set SDA Low by setting SDA pin as open collector output */ } while (0) -#define SCL_HI do { /* Implement me:Set SCL High by setting SCL pin as input */ } while (0) -#define SCL_LO do { /* Implement me:Set SCL Low by setting SCL pin as open collector output */ } while (0) - - -#define SCL_IN (true) /* Implement me: read SDA pin state */ -#define SDA_IN (true) /* Implement me: read SCL pin state */ - -/** - * This macro should set SDA and SCL lines as input. - */ -#define I2C_BITBANG_HW_INIT do { /* Implement me! */ } while (0) - -/** - * Half bit delay routine used to generate the correct timings. - */ -#define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0) - -#endif /* HW_I2C_BITBANG_H */ diff --git a/examples/avr-kern/hw/hw_kbd.h b/examples/avr-kern/hw/hw_kbd.h deleted file mode 100644 index 9ca228cb..00000000 --- a/examples/avr-kern/hw/hw_kbd.h +++ /dev/null @@ -1,72 +0,0 @@ -/** - * \file - * - * - * \brief Keyboard hardware-specific definitions - * - * \version $Id$ - * - * \author Francesco Sacchi - * \author Stefano Fedrigo - */ - -#ifndef HW_KBD_H -#define HW_KBD_H - -#include "hw/kbd_map.h" - -#include - -#warning TODO:This is an example implementation, you must implement it! - -#define K_RPT_MASK (K_UP | K_DOWN | K_OK | K_CANCEL) - -#define KBD_HW_INIT \ - do { \ - /* Put here code to init hw */ \ - } while (0) - -EXTERN_C int emul_kbdReadCols(void); - -/** - * Read the keyboard ports and return the mask of - * depressed keys. - */ -INLINE keymask_t kbd_readkeys(void) -{ - /* Implement me! */ - - //Only for test remove when implement this function - return 0; -} - -#endif /* HW_KBD_H */ diff --git a/examples/avr-kern/hw/hw_lcd_32122a.h b/examples/avr-kern/hw/hw_lcd_32122a.h deleted file mode 100644 index 6ec29c5c..00000000 --- a/examples/avr-kern/hw/hw_lcd_32122a.h +++ /dev/null @@ -1,155 +0,0 @@ -/** - * \file - * - * - * \brief Displaytech 32122A LCD driver - * - * \author Bernie Innocenti - * \author Stefano Fedrigo - * - */ - -#ifndef HW_LCD_32122A_H -#define HW_LCD_32122A_H - -#include -#include - -#warning TODO:This is an example implementation, you must implement it! - -/** - * Predefined LCD PWM contrast values - */ -#define LCD_DEF_PWM 145 -#define LCD_MAX_PWM 505 -#define LCD_MIN_PWM 130 -#define LCD_PWM_CH 0 - - -/** - * \name LCD I/O pins/ports - * @{ - */ -#define LCD_RS /* Implement me! */ -#define LCD_RW /* Implement me! */ -#define LCD_PE_E1 /* Implement me! */ -#define LCD_PE_E2 /* Implement me! */ -#define LCD_DB0 /* Implement me! */ -#define LCD_DB1 /* Implement me! */ -#define LCD_DB2 /* Implement me! */ -#define LCD_DB3 /* Implement me! */ -#define LCD_DB4 /* Implement me! */ -#define LCD_DB5 /* Implement me! */ -#define LCD_DB6 /* Implement me! */ -#define LCD_DB7 /* Implement me! */ -#define LCD_PF_DB0 /* Implment me! */ -/*@}*/ - -/** - * \name LCD bus control macros - * @{ - */ -#define LCD_CLR_A0 do { /* Implement me! */ } while (0) -#define LCD_SET_A0 do { /* Implement me! */ } while (0) -#define LCD_CLR_RD do { /* Implement me! */ } while (0) -#define LCD_SET_RD do { /* Implement me! */ } while (0) -#define LCD_CLR_E1 do { /* Implement me! */ } while (0) -#define LCD_SET_E1 do { /* Implement me! */ } while (0) -#define LCD_CLR_E2 do { /* Implement me! */ } while (0) -#define LCD_SET_E2 do { /* Implement me! */ } while (0) -#define LCD_SET_E(x) do { (void)x; /* Implement me! */ } while (0) -#define LCD_CLR_E(x) do { (void)x; /* Implement me! */ } while (0) -/*@}*/ - -/** - * \name Chip select bits for LCD_SET_E() - * @{ - */ -#define LCDF_E1 ( 0/* Implement me! */) -#define LCDF_E2 ( 0/* Implement me! */) -/*@}*/ -/** Read from the LCD data bus (DB[0-7]) */ -#define LCD_WRITE(x) ((void)x)/* Implement me! */ -/** Write to the LCD data bus (DB[0-7]) */ -#define LCD_READ (0 /* Implement me! */ ) - -/** Set data bus direction to output (write to display) */ -#define LCD_DB_OUT /* Implement me! */ - -/** Set data bus direction to input (read from display) */ -#define LCD_DB_IN /* Implement me! */ - -/** Delay for write (Enable pulse width, 220ns) */ -#define LCD_DELAY_WRITE \ - do { \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - } while (0) - -/** Delay for read (Data ouput delay time, 120ns) */ -#define LCD_DELAY_READ \ - do { \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - } while (0) - - -#define LCD_32122_RESET() do { /* Implement me! */ } while (0) - -INLINE void lcd_32122a_hw_bus_init(void) -{ - cpu_flags_t flags; - IRQ_SAVE_DISABLE(flags); - - /* - * Here set bus pin! - * to init a lcd device. - * - */ - - /* - * Data bus is in output state most of the time: - * LCD r/w functions assume it is left in output state - */ - LCD_DB_OUT; - - - IRQ_RESTORE(flags); -} - -#endif /* HW_LCD_32122A_H */ - diff --git a/examples/avr-kern/hw/hw_lcd_hd44.h b/examples/avr-kern/hw/hw_lcd_hd44.h deleted file mode 100644 index dfebbcab..00000000 --- a/examples/avr-kern/hw/hw_lcd_hd44.h +++ /dev/null @@ -1,157 +0,0 @@ -/** - * \file - * - * - * \brief LCD low-level hardware macros - * - * \author Bernie Innocenti - * \author Stefano Fedrigo - * - */ - -#ifndef HW_LCD_HD44_H -#define HW_LCD_HD44_H - -#include "cfg/cfg_lcd_hd44.h" /* CONFIG_LCD_4BIT */ - -#include -#include - -#warning TODO:This is an example implementation, you must implement it! - -/** - * \name LCD I/O pins/ports - * @{ - */ -#define LCD_RS /* Implement me! */ -#define LCD_RW /* Implement me! */ -#define LCD_E /* Implement me! */ -#define LCD_DB0 /* Implement me! */ -#define LCD_DB1 /* Implement me! */ -#define LCD_DB2 /* Implement me! */ -#define LCD_DB3 /* Implement me! */ -#define LCD_DB4 /* Implement me! */ -#define LCD_DB5 /* Implement me! */ -#define LCD_DB6 /* Implement me! */ -#define LCD_DB7 /* Implement me! */ -/*@}*/ - -/** - * \name DB high nibble (DB[4-7]) - * @{ - */ - -#if CONFIG_LCD_4BIT - #define LCD_MASK (LCD_DB7 | LCD_DB6 | LCD_DB5 | LCD_DB4) - #define LCD_SHIFT 4 -#else - #define LCD_MASK (uint8_t)0xff - #define LCD_SHIFT 0 -#endif -/*@}*/ - -/** - * \name LCD bus control macros - * @{ - */ -#define LCD_CLR_RS /* Implement me! */ -#define LCD_SET_RS /* Implement me! */ -#define LCD_CLR_RD /* Implement me! */ -#define LCD_SET_RD /* Implement me! */ -#define LCD_CLR_E /* Implement me! */ -#define LCD_SET_E /* Implement me! */ - -/* Enter command mode */ -#define LCD_SET_COMMAND() /* Implement me! */ - -/* Enter data mode */ -#define LCD_SET_DATA() /* Implement me! */ - -#if CONFIG_LCD_4BIT - #define LCD_WRITE_H(x) ((void)x)/* Implement me! */ - #define LCD_WRITE_L(x) ((void)x)/* Implement me! */ - #define LCD_READ_H ( 0 /* Implement me! */ ) - #define LCD_READ_L ( 0 /* Implement me! */ ) -#else - #define LCD_WRITE(x) ((void)x)/* Implement me! */ - #define LCD_READ (0 /* Implement me! */ ) -#endif -/*@}*/ - -/** Set data bus direction to output (write to display) */ -#define LCD_DB_OUT /* Implement me! */ - -/** Set data bus direction to input (read from display) */ -#define LCD_DB_IN /* Implement me! */ -/** Delay for write (Enable pulse width, 220ns) */ -#define LCD_DELAY_WRITE \ - do { \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - } while (0) - -/** Delay for read (Data ouput delay time, 120ns) */ -#define LCD_DELAY_READ \ - do { \ - NOP; \ - NOP; \ - NOP; \ - NOP; \ - } while (0) - - - -INLINE void lcd_hd44_hw_bus_init(void) -{ - cpu_flags_t flags; - IRQ_SAVE_DISABLE(flags); - - /* - * Here set bus pin! - * to init a lcd device. - * - */ - - /* - * Data bus is in output state most of the time: - * LCD r/w functions assume it is left in output state - */ - LCD_DB_OUT; - - - IRQ_RESTORE(flags); -} - -#endif /* HW_LCD_HD44_H */ diff --git a/examples/avr-kern/hw/hw_lm75.h b/examples/avr-kern/hw/hw_lm75.h deleted file mode 100644 index 290dae09..00000000 --- a/examples/avr-kern/hw/hw_lm75.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - * \file - * - * - * \brief Hardware macro definition. - * - * \author Daniele Basile - */ - -#ifndef HW_LM75_H -#define HW_LM75_H - -#warning TODO:This is an example implentation, you must implement it! - -#define LM75_HW_INIT() \ - do { \ - /* Pin init */\ - } while (0) - -#endif /* HW_LM75_H */ - diff --git a/examples/avr-kern/hw/hw_mcp41.c b/examples/avr-kern/hw/hw_mcp41.c deleted file mode 100644 index dc2a051c..00000000 --- a/examples/avr-kern/hw/hw_mcp41.c +++ /dev/null @@ -1,53 +0,0 @@ -/** - * \file - * - * - * \brief MCP41 hardware-specific definitions - * - * \version $Id$ - * \author Francesco Sacchi - */ - -#include "hw/hw_mcp41.h" - -#include -#include - -#warning TODO:This is an example implementation, you must implement it! - -const uint16_t mcp41_ports[MCP41_CNT] = -{ - 0, /* add here mcp41 ports */ -}; -const uint8_t mcp41_pins [MCP41_CNT] = -{ - 0, /* add here mcp41 ports */ -}; - diff --git a/examples/avr-kern/hw/hw_mcp41.h b/examples/avr-kern/hw/hw_mcp41.h deleted file mode 100644 index 645b6dac..00000000 --- a/examples/avr-kern/hw/hw_mcp41.h +++ /dev/null @@ -1,75 +0,0 @@ -/** - * \file - * - * - * \brief MCP41 hardware-specific definitions - * - * \version $Id$ - * \author Francesco Sacchi - */ - -#ifndef HW_MCP41_H -#define HW_MCP41_H - -#include "hw/mcp41_map.h" - -#include - - -#warning TODO:This is an example implementation, you must implement it! - - -INLINE void SET_MCP41_DDR(Mcp41Dev dev) -{ - /* Implement me! */ - //Warning: this funtions is like avr target name, - //fix it to comply for all target. - - //Only for test remove when implement this function - (void)dev; -} - -INLINE void MCP41_ON(Mcp41Dev i) -{ - /* Implement me! */ - - //Only for test remove when implement this function - (void)i; -} - -INLINE void MCP41_OFF(Mcp41Dev i) -{ - /* Implement me! */ - - //Only for test remove when implement this function - (void)i; -} - -#endif /* HW_MCP41_H */ diff --git a/examples/avr-kern/hw/hw_ntc.c b/examples/avr-kern/hw/hw_ntc.c deleted file mode 100644 index b8c56914..00000000 --- a/examples/avr-kern/hw/hw_ntc.c +++ /dev/null @@ -1,46 +0,0 @@ -/** - * \file - * - * - * \brief NTC hardware-specific definition - * - * \version $Id: hw_ntc.h 1359 2008-05-26 09:42:37Z asterix $ - * \author Lorenzo Berni - * - */ - -#include -#include "hw/ntc_map.h" - -const res_t NTC_RSER[NTC_CNT]; -const res_t NTC_RPAR[NTC_CNT]; -const amp_t NTC_AMP[NTC_CNT]; -const NtcHwInfo* NTC_INFO[NTC_CNT]; diff --git a/examples/avr-kern/hw/hw_ntc.h b/examples/avr-kern/hw/hw_ntc.h deleted file mode 100644 index 49152a45..00000000 --- a/examples/avr-kern/hw/hw_ntc.h +++ /dev/null @@ -1,136 +0,0 @@ -/** - * \file - * - * - * \brief NTC hardware-specific definition - * - * \version $Id$ - * \author Francesco Sacchi - * - * A NTC acts as a variable resistor, whose resistance changes as a - * function of the temperature it measures. To sample it correctly, it is - * usually parallelized and serialized with two fixed resistor. The following diagram shows - * what is the exact disposition of the components, as handled by this - * library: - * - *
- *                 o Vref
- *                 |
- *                 |                               o Vref
- *                 |                               |
- *               -----                             |
- *              |     |                        ---------
- *              | Rser|                       |         |
- *              |     |                       |         |
- *               -----     -----              |   ADC   |
- *                 | Vp   |     |             |         |
- *      -----------|------| Amp |-------------|         |
- *     |           |      |     |      Vadc   |         |
- *   -----       -----     -----               ---------
- *  |     |     |     |
- *  | NTC |     | Rpar|
- *  |     |     |     |
- *   -----       -----
- *     |           |
- *     |           |
- *   -----       -----
- *    ---         ---
- *
- * Amp is an amplifier that amplify of AMP times the signal. - * If we indicate Rp as the parallel of NTC with Rpar, ADCBITS as the bits of the ad converter - * and ADCVAL as the result from the adc convertion (Not Vadc but just the value read - * from the adc register), after various calculation, the expression of Rp is: - * - *
- *
- *            ADCVAL * Rser
- * Rp = ------------------------
- *         ADCBITS
- *	2         * AMP - ADCVAL
- *
- * - * And after that NTC obvisiously is: - *
- *        Rpar * Rp
- * NTC = ----------
- *        Rpar - Rp
- *
- * - * - * The function ntc_hw_read() compute the resistence using these formulas above. - */ - -#ifndef HW_NTC_H -#define HW_NTC_H - -#include "ntc_map.h" - -#include - -#include -#include - -#warning TODO:This is an example implementation, you must implement it! - -extern const res_t NTC_RSER[NTC_CNT]; -extern const res_t NTC_RPAR[NTC_CNT]; -extern const amp_t NTC_AMP[NTC_CNT]; -extern const NtcHwInfo* NTC_INFO[NTC_CNT]; - - -/*! - * Read the resistence of ntc device \a dev. - * Return the result in res_t type. - */ -INLINE res_t ntc_hw_read(NtcDev dev) -{ - ASSERT(dev < NTC_CNT); - // See above for formula explanation. - adcread_t adcval = adc_read((uint16_t)dev); - float rp = (adcval * NTC_RSER[dev] ) / ((1 << adc_bits()) * NTC_AMP[dev] - adcval); - - //kprintf("Rp[%f], Rntc[%f]\n", rp/100, ((NTC_RPAR[dev] * rp) / (NTC_RPAR[dev] - rp)) / 100.0); - - return ( (NTC_RPAR[dev] * rp) / (NTC_RPAR[dev] - rp) ); -} - - -/*! - * Return the info (aka the table) associated with ntc device \a dev. - */ -INLINE const NtcHwInfo* ntc_hw_getInfo(NtcDev dev) -{ - return NTC_INFO[dev]; -} - -#define NTC_HW_INIT do { /* Implement me! */ } while(0) - -#endif /* HW_NTC_H */ diff --git a/examples/avr-kern/hw/hw_phase.c b/examples/avr-kern/hw/hw_phase.c deleted file mode 100644 index 54509ef3..00000000 --- a/examples/avr-kern/hw/hw_phase.c +++ /dev/null @@ -1,46 +0,0 @@ -/** - * \file - * - * - * \brief Phase control hardware-specific definitions - * - * \version $Id$ - * \author Francesco Sacchi - */ - -#ifndef HW_PHASE_H -#define HW_PHASE_H - -#include "hw/hw_phase.h" - -#warning TODO:This is an example implementation, you must implement it! - -#endif /* HW_PHASE_H */ diff --git a/examples/avr-kern/hw/hw_phase.h b/examples/avr-kern/hw/hw_phase.h deleted file mode 100644 index 7649e702..00000000 --- a/examples/avr-kern/hw/hw_phase.h +++ /dev/null @@ -1,80 +0,0 @@ -/** - * \file - * - * - * \brief Phase control hardware-specific definitions - * - * \version $Id$ - * - * \author Francesco Sacchi - */ - -#ifndef HW_PHASE_H -#define HW_PHASE_H - -#include "hw/phase_map.h" - -#include - -#warning TODO:This is an example implementation, you must implement it! - -#define PHASE_HW_INIT do { /* Implement me! */ }while (0) - -INLINE void TRIAC_OFF(TriacDev i) -{ - /* Implement me! */ - - //Only for test remove when implement this function - (void)i; -} - - -INLINE void TRIAC_ON(TriacDev i) -{ - /* Implement me! */ - - //Only for test remove when implement this function - (void)i; -} - -INLINE void SET_TRIAC_DDR(TriacDev i) -{ - /* Implement me! */ - - //Only for test remove when implement this function - (void)i; -} - -void zerocross_isr(void); -#define DEFINE_ZEROCROSS_ISR() void zerocross_isr(void) - - -#endif /* HW_PHASE_H */ diff --git a/examples/avr-kern/hw/hw_sd.h b/examples/avr-kern/hw/hw_sd.h deleted file mode 100644 index d15b5506..00000000 --- a/examples/avr-kern/hw/hw_sd.h +++ /dev/null @@ -1,53 +0,0 @@ -/** - * \file - * - * - * \brief SD driver hardware-specific definitions. - * - * \version $Id$ - * - * \author Luca Ottaviano - */ - -#ifndef HW_SD_H -#define HW_SD_H - -#warning FIXME: This is an example implementation, you must implement it - -#define SD_CS_INIT() do { /* implement me */} while(0) -#define SD_CS_ON() do { /* implement me */} while(0) -#define SD_CS_OFF() do { /* implement me */} while(0) - -#define SD_PIN_INIT() do { /* implement me */} while(0) -#define SD_CARD_PRESENT() true /* implement me */ -#define SD_WRITE_PROTECT() false /* implement me */ - -#endif /* HW_SD_H */ diff --git a/examples/avr-kern/hw/hw_ser.h b/examples/avr-kern/hw/hw_ser.h deleted file mode 100644 index 2489c433..00000000 --- a/examples/avr-kern/hw/hw_ser.h +++ /dev/null @@ -1,53 +0,0 @@ -/** - * \file - * - * - * \brief Serial hardware-specific definitions - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef HW_SER_H -#define HW_SER_H - -#include "cfg/cfg_ser.h" - -#if CONFIG_SER_STROBE - #warning FIXME: this is an example implementation, you must implement it - - #define SER_STROBE_INIT do { /* implement me */ } while (0) - #define SER_STROBE_ON do { /* implement me */ } while (0) - #define SER_STROBE_OFF do { /* implement me */ } while (0) -#endif - -#endif /* HW_SER_H */ diff --git a/examples/avr-kern/hw/hw_sipo.h b/examples/avr-kern/hw/hw_sipo.h deleted file mode 100644 index 3371c2c0..00000000 --- a/examples/avr-kern/hw/hw_sipo.h +++ /dev/null @@ -1,109 +0,0 @@ -/** - * \file - * - * - * \brief Macro for HW_SIPO_H - * - * - * \version $Id$ - * - * \author Andrea Grandi - * \author Daniele Basile - */ - -#ifndef HW_SIPO_H -#define HW_SIPO_H - -/** - * Map sipo connection on board. - */ -typedef enum SipoMap -{ - SIPO_CNT -} SipoMap; - -/** - * Define generic macro to set pins logic level - */ -#define SIPO_SET_LEVEL_LOW(dev) do { /* Implement me! */ } while (0) -#define SIPO_SET_LEVEL_HIGH(dev) do { /* Implement me! */ } while (0) - - -/** - * Generate one low pulse on select line. - */ -#define PULSE_LOW(dev) do { /* Implement me! */ } while (0) - -/** - * Generate one hight pulse on select line. - */ -#define PULSE_HIGH(dev) do { /* Implement me! */ } while (0) - - -/** - * Define the procedure to drive serial input in sipo device (SI). - */ -#define SIPO_SI_HIGH() do { /* Implement me! */ } while (0) -#define SIPO_SI_LOW() do { /* Implement me! */ } while (0) - -/** - * Drive clock to shift SI data into latch. - */ -#define SIPO_SI_CLOCK(clk_pol) \ - do { \ - (void)clk_pol; \ - /* Implement me! */ \ - } while (0) - -/** - * Do everything needed in order to load dato into sipo. - */ -#define SIPO_LOAD(device, load_pol) do { /* Implement me! */ } while (0) - -/** - * Enable the shift register output. - */ -#define SIPO_ENABLE() do { /* Implement me! */ } while (0) - -/** - * Set polarity for Load, Clk, SI signals. - */ -#define SIPO_SET_LD_LEVEL(device, load_pol) do { /* Implement me! */ } while (0) -#define SIPO_SET_CLK_LEVEL(clock_pol) do { /* Implement me! */ } while (0) -#define SIPO_SET_SI_LEVEL() do { /* Implement me! */ } while (0) - -/** - * Do anything that needed to init sipo pins. - */ -#define SIPO_INIT_PIN() do { /* Implement me! */ } while (0) - -#endif /* HW_SIPO_H */ diff --git a/examples/avr-kern/hw/hw_spi.h b/examples/avr-kern/hw/hw_spi.h deleted file mode 100644 index 04e4893a..00000000 --- a/examples/avr-kern/hw/hw_spi.h +++ /dev/null @@ -1,115 +0,0 @@ -/** - * \file - * - * - * \brief Hardware macro definition. - * - * - * \version $Id$ - * \author Daniele Basile - */ - -#ifndef HW_SPI_H -#define HW_SPI_H - -#warning TODO:This is an example implentation, you must implement it! - -#include - -/** - * SPI pin definition. - * - * \note CS is assert when level - * is low. - * - * \{ - */ -#define CS /* pin */ ///Connect to CS pin of Flash memory. -#define SCK /* pin */ ///Connect to SCK pin of Flash memory. -#define MOSI /* pin */ ///Connect to SI pin of Flash memory. -#define MISO /* pin */ ///Connect to SO pin of Flash memory. -#define SPI_PORT /* pin */ ///Micro pin PORT register. -#define SPI_PIN /* pin */ ///Micro pin PIN register. -#define SPI_DDR /* pin */ ///Micro pin DDR register. -/*\}*/ - -/** - * Pin logic level. - * - * \{ - */ -#define MOSI_LOW() do { /* Implement me! */ } while(0) -#define MOSI_HIGH() do { /* Implement me! */ } while(0) -#define MISO_HIGH() do { /* Implement me! */ } while(0) -#define SCK_LOW() do { /* Implement me! */ } while(0) -#define SCK_HIGH() do { /* Implement me! */ } while(0) -#define CS_LOW() do { /* Implement me! */ } while(0) -#define CS_HIGH() do { /* Implement me! */ } while(0) -/*\}*/ - -/** - * SPI pin commands. - * - * \{ - */ -#define CS_ENABLE() CS_LOW() -#define CS_DISABLE() CS_HIGH() -#define SS_ACTIVE() CS_LOW() -#define SS_INACTIVE() CS_HIGH() -#define SCK_INACTIVE() SCK_LOW() -#define SCK_ACTIVE() SCK_HIGH() -#define CS_OUT() do { /* Implement me! */ } while(0) -#define MOSI_IN() do { /* Implement me! */ } while(0) -#define MOSI_OUT() do { /* Implement me! */ } while(0) -#define IS_MISO_HIGH() (false /* Implement me! */ ) -#define MISO_IN() do { /* Implement me! */ } while(0) -#define MISO_OUT() do { /* Implement me! */ } while(0) -#define SCK_OUT() do { /* Implement me! */ } while(0) - -#define SCK_PULSE()\ - do {\ - SCK_HIGH();\ - SCK_LOW();\ - } while (0) -/*\}*/ - - -#define SPI_HW_INIT() \ - CS_DISABLE();\ - MOSI_LOW();\ - SCK_LOW();\ - MISO_IN();\ - MOSI_OUT();\ - SCK_OUT();\ - CS_OUT(); - -#endif /* HW_SPI_H */ - diff --git a/examples/avr-kern/hw/hw_stepper.h b/examples/avr-kern/hw/hw_stepper.h deleted file mode 100644 index 13141124..00000000 --- a/examples/avr-kern/hw/hw_stepper.h +++ /dev/null @@ -1,309 +0,0 @@ -/** - * \file - * - * - * \brief Stepper hardware-specific definitions - * - * \version $Id$ - * - * \author Daniele Basile - */ - - -#ifndef HW_STEPPER_H -#define HW_STEPPER_H - -#include - -#include - -#include - -#warning TODO:This is an example implentation, you must implement it! - -#define STEPPER_STROBE_INIT \ -do { \ - /* put init code for strobe */ \ -} while (0) - - -#define STEPPER_STROBE_ON do { /* Implement me! */ } while(0) -#define STEPPER_STROBE_OFF do { /* Implement me! */ } while(0) - -/** - * CPU clock frequency is divided by 2^STEPPER_PRESCALER_LOG2 to - * obtain stepper clock. - */ -#define STEPPER_PRESCALER_LOG2 1 - -/** - * Stepper timer clock frequency. - */ -#define STEPPER_CLOCK ((CPU_FREQ) >> STEPPER_PRESCALER_LOG2) - -/** - * us delay to reset a stepper motor. - * This is the time neccessary to reset - * the stepper controll chip. (see datasheet for more detail). - */ -#define STEPPER_RESET_DELAY 1 - -/* - * Pins define for each stepper - */ -#define STEPPER_1_CW_CCW_PIN 0 -#define STEPPER_1_HALF_FULL_PIN 0 -#define STEPPER_1_CONTROL_PIN 0 -#define STEPPER_1_ENABLE_PIN 0 -#define STEPPER_1_RESET_PIN 0 - -/* put here other stepper motor */ - -#define STEPPER_1_SET do { /* Implement me! */ } while(0) -/* add here the set for other stepper motor */ - -#define STEPPER_1_CLEAR do { /* Implement me! */ } while(0) -/* add here the clear for other stepper motor */ - -/* - * Generic macro definition - */ - -/* - * Stepper init macro - */ -#define STEPPER_PIN_INIT_MACRO(port, index) do { \ - /* Add here init pin code */ \ - } while (0) - -/* - * Stepper commands macros - */ -#define STEPPER_SET_CW(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_CCW(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_HALF(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_FULL(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_CONTROL_LOW(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_CONTROL_HIGHT(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_ENABLE(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_DISABLE(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_RESET_ENABLE(index) do { /* Implement me! */ } while (0) -#define STEPPER_SET_RESET_DISABLE(index) do { /* Implement me! */ } while (0) - - -/* - * Reset stepper macro - */ - -#define STEPPER_RESET_MACRO(index) do { \ - STEPPER_SET_RESET_ENABLE(index); \ - timer_udelay(STEPPER_RESET_DELAY); \ - STEPPER_SET_RESET_DISABLE(index); \ - } while (0) - -/* - * Set half or full step macro - */ -#define STEPPER_SET_STEP_MODE_MACRO(index, flag) do { \ - if (flag) \ - STEPPER_SET_HALF(index); \ - else \ - STEPPER_SET_FULL(index); \ - } while (0) - -/* - * Set control status macro - */ -#warning TODO: This macro is not implemented (see below) - -#define STEPPER_SET_CONTROL_BIT_MACRO(index, flag) do { \ - /* if (flag) */ \ - /* WARNING This macros not implemented */ \ - /* else */ \ - /* WARNING This macros not implemented */ \ - } while (0) - -/* - * Set current power macro - */ -#warning TODO: This macro is not implemented (see below) - -#define STEPPER_SET_POWER_CURRENT_MACRO(index, flag) do { \ - /* if (flag) */ \ - /* WARNING This macrois not implemented */ \ - /* else */ \ - /* WARNING This macrois not implemented */ \ - } while (0) - -/* - * Set rotation of stepper motor - * - dir = 1: positive rotation - * - dir = 0: no motor moviment - * - dir = -1: negative rotation - * - */ -#define STEPPER_SET_DIRECTION_MACRO(index, dir) do { \ - switch (dir) \ - { \ - case 1: \ - STEPPER_SET_CW(index); \ - break; \ - case -1: \ - STEPPER_SET_CCW(index); \ - break; \ - case 0: \ - break; \ - } \ - } while (0) - - -/* - * Define macros for manage low level of stepper. - */ - -#define STEPPER_INIT() do { \ - STEPPER_PIN_INIT_MACRO(A, 1); \ - /* Add here code for other stepper motor */ \ - } while (0) - - -/* - * Enable select stepper motor - */ -#define STEPPER_ENABLE(index) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_ENABLE(1); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - -/* - * Enable all stepper connect to micro - */ -#define STEPPER_ENABLE_ALL() do { \ - STEPPER_SET_ENABLE(1); \ - /* Add here code for other stepper motor */ \ - } while (0) - -/* - * Disable select stepper motor - */ -#define STEPPER_DISABLE(index) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_DISABLE(1); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - -/* - * Disable all stepper connect to micro - */ -#define STEPPER_DISABLE_ALL() do { \ - STEPPER_SET_DISABLE(1); \ - /* Add here code for other stepper motor */ \ - } while (0) - -/* - * Reset selected stepper motor - */ -#define STEPPER_RESET(index) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_RESET_MACRO(1); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - -/* - * Reset all stepper motor - */ -#define STEPPER_RESET_ALL() do { \ - STEPPER_RESET_MACRO(1) \ - /* Add here code for other stepper motor */ \ - } while (0) - -// Set half/full step macros -#define STEPPER_SET_HALF_STEP(index, flag) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_STEP_MODE_MACRO(1, flag); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - - -// Control status -#define STEPPER_SET_CONTROL_BIT(index, flag) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_CONTROL_BIT_MACRO(1, flag); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - - -// Set stepper power current -#define STEPPER_SET_POWER_CURRENT(index, flag) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_POWER_CURRENT_MACRO(1, flag); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - -// Set rotation dirction of stepper motor -#define STEPPER_SET_DIRECTION(index, dir) do { \ - switch (index) \ - { \ - case 1: \ - STEPPER_SET_DIRECTION_MACRO(1, dir); \ - break; \ - /* Add here code for other stepper motor */ \ - } \ - } while (0) - -#endif /* HW_STEPPER_H */ - - diff --git a/examples/avr-kern/hw/hw_tas5706a.h b/examples/avr-kern/hw/hw_tas5706a.h deleted file mode 100644 index d1e1a2e6..00000000 --- a/examples/avr-kern/hw/hw_tas5706a.h +++ /dev/null @@ -1,65 +0,0 @@ -/** - * \file - * - * - * \brief HW pin handling. - * - * \version $Id$ - * - * \author Francesco Sacchi - */ - -#ifndef HW_TAS5706A_H -#define HW_TAS5706A_H - -#include - -#warning FIXME: This is an example implementation, you must implement it - -#define TAS5706A_SETPOWERDOWN(val) do { (void) val; /* implement me */ } while (0) -#define TAS5706A_SETRESET(val) do { (void) val; /* implement me */ } while (0) -#define TAS5706A_SETMUTE(val) do { (void) val; /* implement me */ } while (0) - -#define TAS5706A_PIN_INIT() \ - do { \ - TAS5706A_SETPOWERDOWN(true); \ - TAS5706A_SETRESET(true); \ - TAS5706A_SETMUTE(true); \ - /* complete me */ \ - } while (0) - -#define TAS5706A_MCLK_INIT() \ - do { \ - /* implement me */ \ - } while(0) - - -#endif /* HW_TAS5706A_H */ diff --git a/examples/avr-kern/hw/hw_thermo.h b/examples/avr-kern/hw/hw_thermo.h deleted file mode 100644 index bbfc9dde..00000000 --- a/examples/avr-kern/hw/hw_thermo.h +++ /dev/null @@ -1,182 +0,0 @@ -/** - * \file - * - * - * \brief thermo hardware-specific control functions. - * - * \version $Id$ - * \author Francesco Sacchi - * - */ - -#ifndef HW_THERMO_H -#define HW_THERMO_H - -#include "thermo_map.h" -#include "ntc_map.h" - -#include -#include - -#include -#include - -#warning TODO:This is an example implentation, you must implement it! - -/*! - * This function should return the temperature set tolerance. - */ -INLINE deg_t thermo_hw_tolerance(ThermoDev dev) -{ - ASSERT(dev < THERMO_CNT); - - switch (dev) - { - case THERMO_TEST: - /* Put here convertion function to temperature size */ - break; - - /* Put here your thermo device */ - - default: - ASSERT(0); - } - - return 0; -} - - -/*! - * This function should return the timeout for reaching the - * target temperature. - */ -INLINE ticks_t thermo_hw_timeout(ThermoDev dev) -{ - ASSERT(dev < THERMO_CNT); - - switch (dev) - { - case THERMO_TEST: - /* return ms_to_ticks(60000); */ - break; - - /* Put here a time out for select thermo device */ - - default: - ASSERT(0); - } - - return 0; -} - - - -/*! - * Read the temperature of the hw device \a dev. - */ -INLINE deg_t thermo_hw_read(ThermoDev dev) -{ - return ntc_read(dev); -} - - -/*! - * Turns off a specific device. - * This function is usefull to handle errors. - */ -INLINE void thermo_hw_off(ThermoDev dev) -{ - ASSERT(dev < THERMO_CNT); - - switch (dev) - { - case THERMO_TEST: - phase_setPower(TRIAC_TEST, 0); - break; - - /* Put here a thermo device to turn off */ - - default: - ASSERT(0); - } - -} - - -/*! - * Based on the current temperature \a cur_temp and the target temperature \a target, this function turns on and off specific - * triac channel and handles the freezer alarm. - * It may use also PID control for thermo-regolations. - */ -INLINE void thermo_hw_set(ThermoDev dev, deg_t target, deg_t cur_temp) -{ - ASSERT(dev < THERMO_CNT); - - deg_t dist = target - cur_temp; - //kprintf("dev[%d], dist[%d]\n", dev, dist); - - switch(dev) - { - case THERMO_TEST: - if (dist > 0) - { - /* phase_setPower(TRIAC_TEST, dist * PID_TEST_K); */ - } - else - { - /* phase_setPower(TRIAC_TEST, 0); */ - } - break; - - /* Put here an other thermo device */ - - default: - ASSERT(0); - } -} - - -#define THERMO_HW_INIT _thermo_hw_init() - -/*! - * Init hw associated with thermo-control. - */ -INLINE void _thermo_hw_init(void) -{ - ASSERT(phase_initialized); - ASSERT(ntc_initialized); - - phase_setPower(TRIAC_TEST, 0); - - /* Add here the other thermo device */ -} - -#endif /* HW_THERMO_H */ diff --git a/examples/avr-kern/hw/hw_tlv5618.h b/examples/avr-kern/hw/hw_tlv5618.h deleted file mode 100644 index 4a2b4202..00000000 --- a/examples/avr-kern/hw/hw_tlv5618.h +++ /dev/null @@ -1,69 +0,0 @@ -/** - * \file - * - * - * \brief TLV5816 DAC hardware-specific definitions - * - * - * \author Francesco Sacchi - */ - -#ifndef HW_TLV5816_H -#define HW_TLV5816_H - -#warning TODO:This is an example implementation, you must implement it! - -#define TLV5618_CSINIT(pin) \ -do \ -{ \ - (void)pin; \ - /* Implement me! */ \ - TLV5618_CSHIGH(pin); \ -} while(0) - -#define TLV5618_CSLOW(pin) \ -do \ -{ \ - (void)pin; \ - /* Implement me! */ \ -} while(0) - - -#define TLV5618_CSHIGH(pin) \ -do \ -{ \ - (void)pin; \ - /* Implement me! */ \ -} while(0) - - -#endif /* HW_TLV5816_H */ - diff --git a/examples/avr-kern/hw/hw_tmp123.h b/examples/avr-kern/hw/hw_tmp123.h deleted file mode 100644 index adb18588..00000000 --- a/examples/avr-kern/hw/hw_tmp123.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - * \file - * - * - * \brief Hardware macro definition. - * - * \author Daniele Basile - */ - -#ifndef HW_TMP123_H -#define HW_TMP123_H - -#warning TODO:This is an example implentation, you must implement it! - -#define TMP123_HW_CS_EN() /* Implement me! */ -#define TMP123_HW_CS_DIS() /* Implement me! */ - -#define TMP123_HW_INIT() \ - do { \ - /* Pin init */\ - } while (0) - -#endif /* HW_TMP123_H */ - diff --git a/examples/avr-kern/hw/kbd_map.h b/examples/avr-kern/hw/kbd_map.h deleted file mode 100644 index ffe14311..00000000 --- a/examples/avr-kern/hw/kbd_map.h +++ /dev/null @@ -1,71 +0,0 @@ -/** - * \file - * - * - * \brief Keyboard map definitions. - * - * \version $Id$ - * - * \author Francesco Sacchi - * \author Stefano Fedrigo - */ - -#ifndef HW_KBD_MAP_H -#define HW_KBD_MAP_H - -#include - -#warning TODO:This is an example implentation, you must implement it! - - -/** - * Type for keyboard mask. - */ -typedef uint16_t keymask_t; - -/** - * \name Keycodes. - */ -/*@{*/ -#define K_UP BV(0) -#define K_DOWN BV(1) -#define K_OK BV(2) -#define K_CANCEL BV(3) - -#define K_REPEAT BV(13) /**< This is a repeated keyevent. */ -#define K_TIMEOUT BV(14) /**< Fake key event for timeouts. */ -#define K_LONG BV(15) -/*@}*/ - -#define K_LNG_MASK 0 - -#endif /* HW_KBD_MAP_H */ diff --git a/examples/avr-kern/hw/mcp41_map.h b/examples/avr-kern/hw/mcp41_map.h deleted file mode 100644 index 6646391c..00000000 --- a/examples/avr-kern/hw/mcp41_map.h +++ /dev/null @@ -1,59 +0,0 @@ -/** - * \file - * - * - * \brief MCP41 digital potentiometer map definitions. - * - * \version $Id$ - * - * \author Francesco Sacchi - */ - -#ifndef MCP41_MAP_H -#define MCP41_MAP_H - -#warning TODO:This is an example implentation, you must implement it! - -/** \name Enum for mcp41 pot evices. - * \{ - * - */ -typedef enum Mcp41Dev -{ - MCP41_LED, - - /* put here other mcp41 device */ - - MCP41_CNT, -} Mcp41Dev; -/* \} */ - -#endif /* MCP41_MAP_H */ diff --git a/examples/avr-kern/hw/ntc_map.h b/examples/avr-kern/hw/ntc_map.h deleted file mode 100644 index 505f1c31..00000000 --- a/examples/avr-kern/hw/ntc_map.h +++ /dev/null @@ -1,61 +0,0 @@ -/** - * \file - * - * - * \brief NTC map definitions. - * - * \version $Id$ - * - * \author Giovanni Bajo - * \author Francesco Sacchi - */ - -#ifndef NTC_MAP_H -#define NTC_MAP_H - -#include - -#warning TODO:This is an example implentation, you must implement it! - -/*! \name Enum for ntc devices. - * \{ - */ -typedef enum NtcDev -{ - NTC_TEST, - - /* Put here your thermo device */ - - NTC_CNT -} NtcDev; -/* \} */ - -#endif /* NTC_MAP_H */ diff --git a/examples/avr-kern/hw/phase_map.h b/examples/avr-kern/hw/phase_map.h deleted file mode 100644 index 7436e5e8..00000000 --- a/examples/avr-kern/hw/phase_map.h +++ /dev/null @@ -1,58 +0,0 @@ -/** - * \file - * - * - * \brief Triac map definitions. - * - * \version $Id$ - * - * \author Francesco Sacchi - */ - -#ifndef PHASE_MAP_H -#define PHASE_MAP_H - -#warning TODO:This is an example implentation, you must implement it! - -/*! \name Enum for triac devices. - * \{ - */ -typedef enum TriacDev -{ - TRIAC_TEST, - - /* Put here other triac device */ - - TRIAC_CNT -} TriacDev; -/* \} */ - -#endif /* PHASE_MAP_H */ diff --git a/examples/avr-kern/hw/pwm_map.h b/examples/avr-kern/hw/pwm_map.h deleted file mode 100644 index 723da2f1..00000000 --- a/examples/avr-kern/hw/pwm_map.h +++ /dev/null @@ -1,61 +0,0 @@ -/** - * \file - * - * - * - * \brief PWM map device. - * - * \version $Id$ - * - * \author Daniele Basile - */ - -#ifndef HW_PWM_MAP_H -#define HW_PWM_MAP_H - -#warning TODO:This is an example implentation, you must implement it! - -typedef enum -{ - PWM_CH0 = 0, - PWM_CH1, - PWM_CH2, - PWM_CH3, - -/* - * add other PWM channel or - * change above. - */ - - PWM_CNT -} PwmDev; - -#endif /* HW_PWM_MAP_H */ diff --git a/examples/avr-kern/hw/thermo_map.h b/examples/avr-kern/hw/thermo_map.h deleted file mode 100644 index 4376076a..00000000 --- a/examples/avr-kern/hw/thermo_map.h +++ /dev/null @@ -1,70 +0,0 @@ -/** - * \file - * - * - * \brief Thermo regulation control map definitions. - * - * \version $Id$ - * - * \author Francesco Sacchi - */ - -#ifndef THERMO_MAP_H -#define THERMO_MAP_H - -#include -#include - -#warning TODO:This is an example implentation, you must implement it! - -typedef uint8_t thermostatus_t; - -#define THERMO_OFF 0 -#define THERMO_HEATING BV(0) -#define THERMO_FREEZING BV(1) -#define THERMO_TGT_REACH BV(2) -#define THERMOERRF_NTCSHORT BV(3) -#define THERMOERRF_NTCOPEN BV(4) -#define THERMOERRF_TIMEOUT BV(5) -#define THERMO_ACTIVE BV(6) - -#define THERMO_ERRMASK (THERMOERRF_NTCSHORT | THERMOERRF_NTCOPEN | THERMOERRF_TIMEOUT) - -typedef enum ThermoDev -{ - THERMO_TEST, - - /* Put here your thermo device */ - - THERMO_CNT, -} ThermoDev; - -#endif /* THERMO_MAP_H */ diff --git a/examples/avr-kern/main.c b/examples/avr-kern/main.c deleted file mode 100644 index ed2113e7..00000000 --- a/examples/avr-kern/main.c +++ /dev/null @@ -1,37 +0,0 @@ -// Emtpy main.c file generated by the wizard -#include -#include -#include -#include -#include -#include -#include - -static void init(void) -{ - kdbg_init(); - proc_init(); - timer_init(); - - IRQ_ENABLE; -} - -int main(void) -{ - ssize_t i = 4; - - init(); - for (; i; --i) { - kprintf("starting in %d\n", i); - timer_delay(1000); - } - kputs("\n"); - - proc_testRun(); - signal_testRun(); - while (1) - cpu_relax(); - - return 0; -} -