From: qwert <qwert@38d2e660-2303-0410-9eaa-f027e97ec537>
Date: Fri, 18 Jul 2008 14:26:38 +0000 (+0000)
Subject: Remove deprecated appconfig.h file
X-Git-Tag: 2.0.0~431
X-Git-Url: https://codewiz.org/gitweb?a=commitdiff_plain;h=a339ec940ca0ef10f96f2365a5c8dcb1a2aef612;p=bertos.git

Remove deprecated appconfig.h file


git-svn-id: https://src.develer.com/svnoss/bertos/trunk@1503 38d2e660-2303-0410-9eaa-f027e97ec537
---

diff --git a/app/triface/boot/appconfig.h b/app/triface/boot/appconfig.h
deleted file mode 100644
index b0a781b2..00000000
--- a/app/triface/boot/appconfig.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * Copyright 2000 Bernardo Innocenti <bernie@codewiz.org>
- *
- * -->
- *
- * \brief Triface Bootloader.
- *
- * \version $Id$
- *
- * \author Stefano Fedrigo <aleph@develer.com>
- * \author Francesco Sacchi <batt@develer.com>
- * \author Daniele Basile <asterix@develer.com>
- */
-
-
-#ifndef BOOT_CONFIG_H
-#define BOOT_CONFIG_H
-
-/// Enable watchdog timer.
-#define CONFIG_WATCHDOG  0
-
-/**
- * Serial port number for kdebug console
- */
-#define CONFIG_KDEBUG_PORT 1
-
-/**
- * Serial port baud rate for kdebug console
- */
-#define CONFIG_KDEBUG_BAUDRATE 115200
-
-/**
- * printf formatter confguration.
- *
- * \sa PRINTF_DISABLED
- * \sa PRINTF_NOMODIFIERS
- * \sa PRINTF_REDUCED
- * \sa PRINTF_NOFLOAT
- * \sa PRINTF_FULL
- */
-#undef CONFIG_PRINTF
-#define CONFIG_PRINTF PRINTF_NOMODIFIERS
-
-/**
- * Bootloader section size.
- * \note Remember to update this define when changing bootloader size fuses.
- */
-#define CONFIG_BOOT_SIZE 8192
-
-/**
- * \name Xmodem parameters
- * \{
- */
-#define CONFIG_XMODEM_RECV  1
-#define CONFIG_XMODEM_SEND  0
-#define CONFIG_XMODEM_1KCRC 0
-/* \} */
-
-/**
- * Multithreading kernel.
- *
- * \sa config_kern.h
- */
-#define CONFIG_KERNEL 0
-
-/**
- * \name Serial driver parameters
- * \{
- */
-	/** [bytes] Size of the outbound FIFO buffer for port 0. */
-	#define CONFIG_UART0_TXBUFSIZE  32
-
-	/** [bytes] Size of the inbound FIFO buffer for port 0. */
-	#define CONFIG_UART0_RXBUFSIZE  64
-
-	/** [bytes] Size of the outbound FIFO buffer for port 1. */
-	#define CONFIG_UART1_TXBUFSIZE  32
-
-	/** [bytes] Size of the inbound FIFO buffer for port 1. */
-	#define CONFIG_UART1_RXBUFSIZE  64
-
-	/** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
-	#define CONFIG_SPI_TXBUFSIZE	16
-
-	/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
-	#define CONFIG_SPI_RXBUFSIZE	32
-
-	/** SPI data order (AVR only). */
-	#define CONFIG_SPI_DATA_ORDER	SER_MSB_FIRST
-
-	/** SPI clock division factor (AVR only). */
-	#define CONFIG_SPI_CLOCK_DIV	16
-
-	/** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
-	#define CONFIG_SPI_CLOCK_POL	0
-
-	/** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
-	#define CONFIG_SPI_CLOCK_PHASE	0
-
-	/** Default transmit timeout (ms). Set to -1 to disable timeout support */
-	#define CONFIG_SER_TXTIMEOUT    250
-
-	/** Default receive timeout (ms). Set to -1 to disable timeout support */
-	#define CONFIG_SER_RXTIMEOUT	250
-
-	/** Use RTS/CTS handshake */
-	#define CONFIG_SER_HWHANDSHAKE   0
-
-	/** Default baud rate (set to 0 to disable) */
-	#define CONFIG_SER_DEFBAUDRATE   0
-
-	/** Host Port Baud Rate */
-	#define CONFIG_SER_HOSTPORTBAUDRATE	115200
-
-	/** Host Port */
-	#define CONFIG_SER_HOSTPORT 0
-
-	/** Enable ser_gets() and ser_gets_echo() */
-	#define CONFIG_SER_GETS          1
-
-	/** Enable second serial port in emulator. */
-	#define CONFIG_EMUL_UART1        0
-
-	/**
-	 * Transmit always something on serial port 0 TX
-	 * to avoid interference when sending burst of data,
-	 * using AVR multiprocessor serial mode
-	 */
-	#define CONFIG_SER_TXFILL        0
-
-	#define CONFIG_SER_STROBE        0
-/*\}*/
-
-/// Hardware timer selection for drv/timer.c
-#define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE0
-
-/// Disable tests
-#define CONFIG_TEST 0
-#endif /* BOOT_CONFIG_H */