From: lottaviano Date: Fri, 28 Aug 2009 07:37:27 +0000 (+0000) Subject: Remove files for possible license problems. X-Git-Tag: 2.2.0~163 X-Git-Url: https://codewiz.org/gitweb?a=commitdiff_plain;h=b5b3a8b0e6a6492ac8e97e143354f6f75411392d;p=bertos.git Remove files for possible license problems. git-svn-id: https://src.develer.com/svnoss/bertos/trunk@2805 38d2e660-2303-0410-9eaa-f027e97ec537 --- diff --git a/bertos/cpu/arm/scripts/common.sh b/bertos/cpu/arm/scripts/common.sh deleted file mode 100644 index 72fa50ce..00000000 --- a/bertos/cpu/arm/scripts/common.sh +++ /dev/null @@ -1,14 +0,0 @@ -BASE_DIR=`dirname $0` -INT_FILE=${BASE_DIR}/openocd/${PROGRAMMER_TYPE}.cfg -CPU_FILE=${BASE_DIR}/openocd/${PROGRAMMER_CPU}.cfg - -if [ ! -f ${INT_FILE} ]; then - printf "Interface ${PROGRAMMER_TYPE} not supported\n"; - exit 1; -fi - -if [ ! -f ${CPU_FILE} ]; then - printf "CPU ${PROGRAMMER_CPU} not supported\n"; - exit 1; -fi - diff --git a/bertos/cpu/arm/scripts/debug.sh b/bertos/cpu/arm/scripts/debug.sh deleted file mode 100755 index 5b9e0afb..00000000 --- a/bertos/cpu/arm/scripts/debug.sh +++ /dev/null @@ -1,13 +0,0 @@ -#! /usr/bin/env bash -set -x -BASE_DIR=`dirname $0` -. ${BASE_DIR}/common.sh - -OUT_FILE="openocd.tmp" - -sed -e "s#PROGRAMMER_TYPE#${INT_FILE}#" ${BASE_DIR}/openocd/debug.cfg | sed -e "s#PROGRAMMER_CPU#${CPU_FILE}#" > ${OUT_FILE} - -openocd -f ${OUT_FILE} -OCD_RET=$? -rm -f ${OUT_FILE} -exit $OCD_RET diff --git a/bertos/cpu/arm/scripts/flash.sh b/bertos/cpu/arm/scripts/flash.sh deleted file mode 100755 index fd2e1348..00000000 --- a/bertos/cpu/arm/scripts/flash.sh +++ /dev/null @@ -1,15 +0,0 @@ -#! /usr/bin/env bash -#set -x - -BASE_DIR=`dirname $0` -. ${BASE_DIR}/common.sh - -OUT_FILE="openocd.tmp" - -sed -e "s#PROGRAMMER_TYPE#${INT_FILE}#" ${BASE_DIR}/openocd/flash.cfg | sed -e "s#PROGRAMMER_CPU#${CPU_FILE}#" \ - | sed -e "s#IMAGE_FILE#${IMAGE_FILE}#" > ${OUT_FILE} - -openocd -d 1 -f ${OUT_FILE} -OCD_RET=$? -rm -f ${OUT_FILE} -exit $OCD_RET diff --git a/bertos/cpu/arm/scripts/openocd/at91sam7.cfg b/bertos/cpu/arm/scripts/openocd/at91sam7.cfg deleted file mode 100644 index 30971ad1..00000000 --- a/bertos/cpu/arm/scripts/openocd/at91sam7.cfg +++ /dev/null @@ -1,53 +0,0 @@ -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config srst_only srst_pulls_trst - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME sam7 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x3f0f0f0f -} - -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] -target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi - -proc cpu_setup {} { - halt - sleep 10 - - arm7_9 dcc_downloads enable - - armv4_5 core_state arm - arm7_9 fast_memory_access enable - - # Init - taken from the script openocd_at91sam7_ecr.script - mww 0xfffffd44 0x00008000 # disable watchdog - mww 0xfffffd08 0xa5000001 # enable user reset - mww 0xfffffc20 0x00000601 # CKGR_MOR : enable the main oscillator - sleep 10 - mww 0xfffffc2c 0x00481c0e # CKGR_PLLR: 96.1097 MHz - sleep 10 - mww 0xfffffc30 0x00000007 # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz - sleep 10 - mww 0xffffff60 0x003c0100 # MC_FMR: flash mode (FWS=1,FMCN=60) - # arm7_9 force_hw_bkpts enable # program resides in flash - sleep 10 -} - -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 - -#flash bank -flash bank at91sam7 0 0 0 0 0 diff --git a/bertos/cpu/arm/scripts/openocd/debug.cfg b/bertos/cpu/arm/scripts/openocd/debug.cfg deleted file mode 100644 index 70e33c09..00000000 --- a/bertos/cpu/arm/scripts/openocd/debug.cfg +++ /dev/null @@ -1,23 +0,0 @@ -# Change the default telnet port... -telnet_port 4444 - -# Port for TCL connection. -tcl_port 6666 - -# GDB connects here -gdb_port 3333 - -source [find PROGRAMMER_TYPE] - -source [find PROGRAMMER_CPU] - -$_TARGETNAME configure -event reset-start { - cpu_setup -} - -$_TARGETNAME configure -event gdb-detach { - shutdown -} - -init -reset run diff --git a/bertos/cpu/arm/scripts/openocd/flash.cfg b/bertos/cpu/arm/scripts/openocd/flash.cfg deleted file mode 100644 index ad672e95..00000000 --- a/bertos/cpu/arm/scripts/openocd/flash.cfg +++ /dev/null @@ -1,23 +0,0 @@ -# Change the default telnet port... -telnet_port 4444 - -# Port for TCL connection. -tcl_port 6666 - -# GDB connects here -gdb_port 3333 - -source [find PROGRAMMER_TYPE] - -source [find PROGRAMMER_CPU] - -$_TARGETNAME configure -event reset-start { - cpu_setup - # this will work only with (intel) hex files, which have ROM address information - flash write_image IMAGE_FILE -} - -$_TARGETNAME configure -event reset-end "shutdown" - -init -reset run diff --git a/bertos/cpu/arm/scripts/openocd/gdbinit-sam7 b/bertos/cpu/arm/scripts/openocd/gdbinit-sam7 deleted file mode 100644 index 3f8067dc..00000000 --- a/bertos/cpu/arm/scripts/openocd/gdbinit-sam7 +++ /dev/null @@ -1,2 +0,0 @@ -monitor soft_reset_halt -thbreak main diff --git a/bertos/cpu/arm/scripts/openocd/jtag-tiny.cfg b/bertos/cpu/arm/scripts/openocd/jtag-tiny.cfg deleted file mode 100644 index e557ca3c..00000000 --- a/bertos/cpu/arm/scripts/openocd/jtag-tiny.cfg +++ /dev/null @@ -1,4 +0,0 @@ -interface ft2232 -ft2232_device_desc "Amontec JTAGkey" -ft2232_layout jtagkey -ft2232_vid_pid 0x0403 0xcff8