From: Jameson Graef Rollins Date: Thu, 19 Feb 2009 20:19:02 +0000 (-0500) Subject: The monkeysphere {import,gen}_subkey functions were not up-to-date. X-Git-Tag: monkeysphere_0.23~34^2~6 X-Git-Url: https://codewiz.org/gitweb?a=commitdiff_plain;h=bd64869a3b68ff8a020c381371a8ab1e24a5a0e4;p=monkeysphere.git The monkeysphere {import,gen}_subkey functions were not up-to-date. did a lot of work to bring them up-to-date, and better handle argument checking. also updated man page, changelog, and tests/basic. --- diff --git a/man/man1/monkeysphere.1 b/man/man1/monkeysphere.1 index 3ed43e1..345e1d8 100644 --- a/man/man1/monkeysphere.1 +++ b/man/man1/monkeysphere.1 @@ -56,24 +56,32 @@ ID, 1 if no matching keys were found at all, and 2 if matching keys were found but none were acceptable. `a' may be used in place of `update-authorized_keys'. .TP +.B import-subkey FILE [KEYID] +Import an existing ssh RSA key as an authentication subkey for a +private key in your GnuPG keyring. KEYID is the key ID for the +primary key for which the subkey with "authentication" capability will +be imported. If no key ID is specified, but only one key exists in +the secret keyring, that key will be used. `i' may be used in place +of `import-subkey'. +.TP .B gen-subkey [KEYID] Generate an authentication subkey for a private key in your GnuPG -keyring. For the primary key with the specified key ID, generate a -subkey with "authentication" capability that can be used for -monkeysphere transactions. An expiration length can be specified with -the `-e' or `--expire' option (prompt otherwise). If no key ID is +keyring. KEYID is the key ID for the primary key for which the subkey +with "authentication" capability will be generated. If no key ID is specified, but only one key exists in the secret keyring, that key -will be used. `g' may be used in place of `gen-subkey'. +will be used. The length of the generated key can be specified with +the `--length` or `-l` option. `g' may be used in place of +`gen-subkey'. .TP .B ssh-proxycommand -an ssh proxy command that can be used -to trigger a monkeysphere update of the ssh known_hosts file for a -host that is being connected to with ssh. This works by updating the -known_hosts file for the host first, before an attempted connection to -the host is made. Once the known_hosts file has been updated, a TCP -connection to the host is made by exec'ing netcat(1). Regular ssh -communication is then done over this netcat TCP connection (see -ProxyCommand in ssh_config(5) for more info). +An ssh ProxyCommand that can be used to trigger a monkeysphere update +of the ssh known_hosts file for a host that is being connected to with +ssh. This works by updating the known_hosts file for the host first, +before an attempted connection to the host is made. Once the +known_hosts file has been updated, a TCP connection to the host is +made by exec'ing netcat(1). Regular ssh communication is then done +over this netcat TCP connection (see ProxyCommand in ssh_config(5) for +more info). This command is meant to be run as the ssh "ProxyCommand". This can either be done by specifying the proxy command on the command line: @@ -108,9 +116,10 @@ change in the future, possibly by adding a deferred check, so that hosts that go from non-monkeysphere-enabled to monkeysphere-enabled will be properly checked. -Setting the MONKEYSPHERE_CHECK_KEYSERVER -variable (to `true' or `false') will override the keyserver-checking policy -defined above. +Setting the CHECK_KEYSERVER variable in the config file or the +MONKEYSPHERE_CHECK_KEYSERVER environment variable to either `true' or +`false' will override the keyserver-checking policy defined above and +either always or never check the keyserver for host key updates. .TP .B subkey-to-ssh-agent [ssh-add arguments] diff --git a/packaging/debian/changelog b/packaging/debian/changelog index 6a9ea18..fc317d9 100644 --- a/packaging/debian/changelog +++ b/packaging/debian/changelog @@ -16,12 +16,12 @@ monkeysphere (0.23~pre-1) UNRELEASED; urgency=low functions that require it to be there. * get rid of getopts dependency * added version output option - * check that existing authentication keys are valid in gen_key - function. + * better checks on validity of existing authentication subkeys when + doing monkeysphere {import,gen}_subkey. * add transition infrastructure for major changes between releases (see transitions/README.txt) - -- Daniel Kahn Gillmor Thu, 19 Feb 2009 02:14:44 -0500 + -- Jameson Graef Rollins Thu, 19 Feb 2009 15:11:04 -0500 monkeysphere (0.22-1) unstable; urgency=low diff --git a/src/monkeysphere b/src/monkeysphere index 992ca06..4169f2a 100755 --- a/src/monkeysphere +++ b/src/monkeysphere @@ -45,12 +45,9 @@ Monkeysphere client tool. subcommands: update-known_hosts (k) [HOST]... update known_hosts file update-authorized_keys (a) update authorized_keys file - import-subkey (i) import existing ssh key as gpg subkey - --keyfile (-f) FILE key file to import - --expire (-e) EXPIRE date to expire + import-subkey (i) FILE [KEYID] import existing ssh key as gpg subkey gen-subkey (g) [KEYID] generate an authentication subkey --length (-l) BITS key length in bits (2048) - --expire (-e) EXPIRE date to expire ssh-proxycommand monkeysphere ssh ProxyCommand subkey-to-ssh-agent (s) store authentication subkey in ssh-agent version (v) show version number @@ -59,6 +56,83 @@ subcommands: EOF } +# take a secret key ID and check that only zero or one ID is provided, +# and that it corresponds to only a single secret key ID +check_gpg_sec_key_id() { + local gpgSecOut + + case "$#" in + 0) + gpgSecOut=$(gpg --quiet --fixed-list-mode --list-secret-keys --with-colons 2>/dev/null | egrep '^sec:') + ;; + 1) + gpgSecOut=$(gpg --quiet --fixed-list-mode --list-secret-keys --with-colons "$keyID" | egrep '^sec:') || failure + ;; + *) + failure "You must specify only a single primary key ID." + ;; + esac + + # check that only a single secret key was found + case $(echo "$gpgSecOut" | grep -c '^sec:') in + 0) + failure "No secret keys found. Create an OpenPGP key with the following command: + gpg --gen-key" + ;; + 1) + echo "$gpgSecOut" | cut -d: -f5 + ;; + *) + echo "Multiple primary secret keys found:" | log error + echo "$gpgSecOut" | cut -d: -f5 | log error + echo "Please specify which primary key to use." | log error + failure + ;; + esac +} + +# check that a valid authentication subkey does not already exist +check_gpg_authentication_subkey() { + local keyID + local IFS + local line + local type + local validity + local usage + + keyID="$1" + + # check that a valid authentication key does not already exist + IFS=$'\n' + for line in $(gpg --quiet --fixed-list-mode --list-keys --with-colons "$keyID") ; do + type=$(echo "$line" | cut -d: -f1) + validity=$(echo "$line" | cut -d: -f2) + usage=$(echo "$line" | cut -d: -f12) + + # look at keys only + if [ "$type" != 'pub' -a "$type" != 'sub' ] ; then + continue + fi + # check for authentication capability + if ! check_capability "$usage" 'a' ; then + continue + fi + # if authentication key is valid, prompt to continue + if [ "$validity" = 'u' ] ; then + log error "A valid authentication key already exists for primary key '$keyID'." + if [ "$PROMPT" = "true" ] ; then + read -p "Are you sure you would like to generate another one? (y/N) " OK; OK=${OK:N} + if [ "${OK/y/Y}" != 'Y' ] ; then + failure "aborting." + fi + break + else + failure "aborting." + fi + fi + done +} + ######################################################################## # MAIN ######################################################################## diff --git a/src/share/m/gen_subkey b/src/share/m/gen_subkey index d926ad5..7c3ebb7 100644 --- a/src/share/m/gen_subkey +++ b/src/share/m/gen_subkey @@ -15,10 +15,10 @@ gen_subkey(){ local keyLength - local keyExpire + local gpgSecOut local keyID - local gpgOut - local userID + local editCommands + local fifoDir # get options while true ; do @@ -27,10 +27,6 @@ gen_subkey(){ keyLength="$2" shift 2 ;; - -e|--expire) - keyExpire="$2" - shift 2 - ;; *) if [ "$(echo "$1" | cut -c 1)" = '-' ] ; then failure "Unknown option '$1'. @@ -41,67 +37,11 @@ Type '$PGRM help' for usage." esac done - case "$#" in - 0) - gpgSecOut=$(gpg --quiet --fixed-list-mode --list-secret-keys --with-colons 2>/dev/null | egrep '^sec:') - ;; - 1) - gpgSecOut=$(gpg --quiet --fixed-list-mode --list-secret-keys --with-colons "$1" | egrep '^sec:') || failure - ;; - *) - failure "You must specify only a single primary key ID." - ;; - esac - - # check that only a single secret key was found - case $(echo "$gpgSecOut" | grep -c '^sec:') in - 0) - failure "No secret keys found. Create an OpenPGP key with the following command: - gpg --gen-key" - ;; - 1) - keyID=$(echo "$gpgSecOut" | cut -d: -f5) - ;; - *) - echo "Multiple primary secret keys found:" - echo "$gpgSecOut" | cut -d: -f5 - failure "Please specify which primary key to use." - ;; - esac + # check that the keyID is unique + keyID=$(check_gpg_sec_key_id "$@") - # check that a valid authentication key does not already exist - IFS=$'\n' - for line in $(gpg --quiet --fixed-list-mode --list-keys --with-colons "$keyID") ; do - type=$(echo "$line" | cut -d: -f1) - validity=$(echo "$line" | cut -d: -f2) - usage=$(echo "$line" | cut -d: -f12) - - # look at keys only - if [ "$type" != 'pub' -a "$type" != 'sub' ] ; then - continue - fi - # check for authentication capability - if ! check_capability "$usage" 'a' ; then - continue - fi - # if authentication key is valid, prompt to continue - if [ "$validity" = 'u' ] ; then - log error "A valid authentication key already exists for primary key '$keyID'." - if [ "$PROMPT" = "true" ] ; then - read -p "Are you sure you would like to generate another one? (y/N) " OK; OK=${OK:N} - if [ "${OK/y/Y}" != 'Y' ] ; then - failure "aborting." - fi - break - else - failure "aborting." - fi - fi - done - - # set subkey defaults - # prompt about key expiration if not specified - keyExpire=$(get_gpg_expiration "$keyExpire") + # check that an authentication subkey does not already exist + check_gpg_authentication_subkey "$keyID" # generate the list of commands that will be passed to edit-key editCommands=$(cat <