From: Jameson Graef Rollins Date: Sun, 29 Jun 2008 18:54:00 +0000 (-0400) Subject: Add better host certifier management, and updated man page. X-Git-Tag: monkeysphere_0.4-1~19 X-Git-Url: https://codewiz.org/gitweb?a=commitdiff_plain;h=e04825a10f888602276a2e803401a879dbcec671;p=monkeysphere.git Add better host certifier management, and updated man page. --- diff --git a/debian/changelog b/debian/changelog index c6b5de4..1f1db61 100644 --- a/debian/changelog +++ b/debian/changelog @@ -6,8 +6,9 @@ monkeysphere (0.4-1) UNRELEASED; urgency=low [ Jameson Graef Rollins ] * Privilege separation: use monkeysphere user to handle maintenance of the gnupg authentication keychain for server. + * Improved certifier key management. - -- Jameson Graef Rollins Tue, 24 Jun 2008 13:52:28 -0400 + -- Jameson Graef Rollins Sun, 29 Jun 2008 14:14:59 -0400 monkeysphere (0.3-1) experimental; urgency=low diff --git a/man/man8/monkeysphere-server.8 b/man/man8/monkeysphere-server.8 index dbcc083..3411c64 100644 --- a/man/man8/monkeysphere-server.8 +++ b/man/man8/monkeysphere-server.8 @@ -32,7 +32,7 @@ user-controlled authorized_keys file (usually may be used in place of `update-users. .TP .B gen-key -Generate a gpg key for the host. `g' may be used in place of +Generate a gpg key pair for the host. `g' may be used in place of `gen-key'. .TP .B show-fingerprint @@ -43,11 +43,24 @@ Show the fingerprint for the host's OpenPGP key. `f' may be used in place of Publish the host's gpg key to the keyserver. `p' may be used in place of `publish-key'. .TP -.B trust-key KEYID [LEVEL] -Set owner trust for key. If LEVEL is not specified, then the program +.B add-certifier KEYID +Add a certifier key to host keyring. The key with specified key ID +will be retrieved from the keyserver and imported to the host keyring. +It will then be given a non-exportable trust signature, with default +depth of 1, so that the key may certifier users to log into the +system. `a' may be used in place of `add-certifier'. +.TP +.B remove-certifier KEYID +Remove a certifier key from the host keyring. The key with specified +key ID will be removed entirely from the host keyring so that the key +will not longer be able to certify users on the system. `r' may be +used in place of `remove-certifier'. +.TP +.B list-certifiers KEYID +Add key to certify system users. If LEVEL is not specified, then the program will prompt for an owner trust level to set for KEYID. This function -lsigns the key as well so that it will have a known validity. `t' may -be used in place of `trust-key'. +lsigns the key as well so that it will have a known validity. `l' may +be used in place of `list-certifiers'. .TP .B help Output a brief usage summary. `h' or `?' may be used in place of @@ -55,22 +68,63 @@ Output a brief usage summary. `h' or `?' may be used in place of .SH SETUP -In order to start using the monkeysphere, there are a couple of things -you need to do first. The first is to generate an OpenPGP key for the -server and convert that key to an ssh key that can be used by ssh for -host authentication. To do this, run the "gen-key" subcommand. Once -that is done, publish the key to a keyserver with "publish-key" -subcommand. Finally, you need to modify the sshd_config to tell sshd -where the new server host key: +In order to start using the monkeysphere, you must first generate an +OpenPGP key for the server and convert that key to an ssh key that can +be used by ssh for host authentication. To do this, run the "gen-key" +subcommand to generate the host key pair: + +$ monkeysphere-server gen-key + +To enable host verification via the monkeysphere, you must then +publish the host's key to the Web of Trust using the "publish-key" +command to push the key to a keyserver. Then modify the sshd_config +to tell sshd where the new server host key is located: HostKey /var/lib/monkeysphere/ssh_host_rsa_key +For users logging into the system to be able to verify the host via +the monkeysphere, at least one person (ie. a server admin) will need +to sign the host's key. This is done in the same way that key signing +is usually done, by pulling the host's key from the keyserver, signing +the key, and re-publishing the signature. Once that is done, users +logging into the host will be able to certify the host's key via the +signature of the host admin. + If the server will also handle user authentication through -monkeysphere-generated authorized_keys files, set the following: +monkeysphere-generated authorized_keys files, the server must be told +which keys will act as user certifiers. This is done with the +"add-certifier" command: + +$ monkeysphere-server add-certifier KEYID + +where KEYID is the key ID of the server admin, or whoever's signature +will be certifying users to the system. Certifiers can be later +remove with the "remove-certifier" command, and listed with the +"list-certifiers" command. + +Remote user's will then be granted access to a local user account +based on the appropriately signed and valid keys associated with user +IDs listed in the authorized_user_ids file of the local user. By +default, the authorized_user_ids file for local users is found in +~/.config/monkeysphere/authorized_user_ids. This can be changed in +the monkeysphere-server.conf file. + +The "update-users" command can then be used to generate +authorized_keys file for local users that sshd can use to grant access +to user accounts for remote users: + +$ monkeysphere-server update-users [USER] + +If no user is specified, authorized_keys files will be generated for +all users on the system. You must also tell sshd to look at the +monkeysphere-generated authorized_keys file for user authentication by +setting the following in the sshd_config: AuthorizedKeysFile /var/lib/monkeysphere/authorized_keys/%u -Once those changes are made, restart the ssh server. +It is recommended to add "monkeysphere-server update-users" to a +system crontab, so that user keys are kept up-to-date, and key +revokations and expirations can be processed in a timely manor. .SH FILES diff --git a/src/monkeysphere b/src/monkeysphere index ab42665..b10adb7 100755 --- a/src/monkeysphere +++ b/src/monkeysphere @@ -72,7 +72,7 @@ gen_subkey(){ # prompt if an authentication subkey already exists if echo "$gpgOut" | egrep "^(pub|sub):" | cut -d: -f 12 | grep -q a ; then echo "An authentication subkey already exists for key '$keyID'." - read -p "Are you sure you would like to generate another one? [y|N]: " OK; OK=${OK:N} + read -p "Are you sure you would like to generate another one? (y/N) " OK; OK=${OK:N} if [ "${OK/y/Y}" != 'Y' ] ; then failure "aborting." fi diff --git a/src/monkeysphere-server b/src/monkeysphere-server index 9196c2f..a080076 100755 --- a/src/monkeysphere-server +++ b/src/monkeysphere-server @@ -41,7 +41,9 @@ subcommands: gen-key (g) [HOSTNAME] generate gpg key for the server show-fingerprint (f) show server's host key fingerprint publish-key (p) publish server's host key to keyserver - trust-key (t) KEYID import and tsign a certification key + add-certifier (a) KEYID import and tsign a certification key + remove-certifier (r) KEYID remove a certification key + list-certifiers (l) list certification keys help (h,?) this help EOF @@ -245,7 +247,7 @@ EOF echo "The following key parameters will be used for the host private key:" echo "$keyParameters" - read -p "Generate key? [Y|n]: " OK; OK=${OK:=Y} + read -p "Generate key? (Y/n) " OK; OK=${OK:=Y} if [ ${OK/y/Y} != 'Y' ] ; then failure "aborting." fi @@ -284,7 +286,7 @@ fingerprint_server_key() { # publish server key to keyserver publish_server_key() { - read -p "really publish key to $KEYSERVER? [y|N]: " OK; OK=${OK:=N} + read -p "really publish key to $KEYSERVER? (y/N) " OK; OK=${OK:=N} if [ ${OK/y/Y} != 'Y' ] ; then failure "aborting." fi @@ -297,22 +299,14 @@ publish_server_key() { failure "NOT PUBLISHED (to avoid permanent publication errors during monkeysphere development)." } -# retrieve key from web of trust, and set owner trust to "full" -# if key is found. -trust_key() { +# retrieve key from web of trust, import it into the host keyring, and +# ltsign the key in the host keyring so that it may certify other keys +add_certifier() { local keyID - local trustLevel + local fingerprint + local ltsignCommand keyID="$1" - - # default values for trust depth and domain - DEPTH=${DEPTH:-1} - DOMAIN=${DOMAIN:-} - - if [ -z "$keyID" ] ; then - failure "You must specify key to trust." - fi - export keyID # export host ownertrust to authentication keyring @@ -332,9 +326,18 @@ trust_key() { echo "key found:" gpg_authentication "--fingerprint $fingerprint" + read -p "Are you sure you want to add this key as a certifier of users on this system? (y/N) " OK; OK=${OK:-N} + if [ "${OK/y/Y}" != 'Y' ] ; then + failure "aborting." + fi + # export the key to the host keyring gpg_authentication "--export $keyID" | gpg_host --import + # default values for trust depth and domain + DEPTH=${DEPTH:-1} + DOMAIN=${DOMAIN:-} + # ltsign command # NOTE: *all* user IDs will be ltsigned ltsignCommand=$(cat <