From: bernie <bernie@38d2e660-2303-0410-9eaa-f027e97ec537>
Date: Wed, 8 Dec 2004 08:57:17 +0000 (+0000)
Subject: Rename time_t to mtime_t.
X-Git-Tag: 1.0.0~935
X-Git-Url: https://codewiz.org/gitweb?a=commitdiff_plain;h=f530f9a7018684f5ad744076220f845ed7732244;p=bertos.git

Rename time_t to mtime_t.


git-svn-id: https://src.develer.com/svnoss/bertos/trunk@306 38d2e660-2303-0410-9eaa-f027e97ec537
---

diff --git a/drv/ser.c b/drv/ser.c
index 9b42a70d..4da6c5bc 100755
--- a/drv/ser.c
+++ b/drv/ser.c
@@ -28,6 +28,9 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.22  2004/12/08 08:56:14  bernie
+ *#* Rename time_t to mtime_t.
+ *#*
  *#* Revision 1.21  2004/11/16 18:10:13  bernie
  *#* Add sanity checks for missing configuration parameters.
  *#*
@@ -151,7 +154,7 @@ int ser_putchar(int c, struct Serial *port)
 	if (fifo_isfull_locked(&port->txfifo))
 	{
 #if CONFIG_SER_TXTIMEOUT != -1
-		time_t start_time = timer_ticks();
+		mtime_t start_time = timer_ticks();
 #endif
 
 		/* Attende finche' il buffer e' pieno... */
@@ -196,7 +199,7 @@ int ser_getchar(struct Serial *port)
 	if (fifo_isempty_locked(&port->rxfifo))
 	{
 #if CONFIG_SER_RXTIMEOUT != -1
-		time_t start_time = timer_ticks();
+		mtime_t start_time = timer_ticks();
 #endif
 		/* Wait while buffer is empty */
 		do
@@ -243,7 +246,7 @@ int ser_getchar_nowait(struct Serial *port)
 
 #if CONFIG_SER_GETS
 /*!
- * Read a line long at most as size and puts it
+ * Read a line long at most as size and put it
  * in buf.
  * \return number of chars read or EOF in case
  *         of error.
@@ -369,7 +372,7 @@ int ser_printf(struct Serial *port, const char *format, ...)
 
 
 #if CONFIG_SER_RXTIMEOUT != -1 || CONFIG_SER_TXTIMEOUT != -1
-void ser_settimeouts(struct Serial *port, time_t rxtimeout, time_t txtimeout)
+void ser_settimeouts(struct Serial *port, mtime_t rxtimeout, mtime_t txtimeout)
 {
 	port->rxtimeout = rxtimeout;
 	port->txtimeout = txtimeout;
@@ -385,9 +388,9 @@ void ser_settimeouts(struct Serial *port, time_t rxtimeout, time_t txtimeout)
  *
  * \note Serial errors are reset before and after executing the purge.
  */
-void ser_resync(struct Serial *port, time_t delay)
+void ser_resync(struct Serial *port, mtime_t delay)
 {
-	time_t old_rxtimeout = port->rxtimeout;
+	mtime_t old_rxtimeout = port->rxtimeout;
 
 	ser_settimeouts(port, delay, port->txtimeout);
 	do
diff --git a/drv/ser.h b/drv/ser.h
index 167bb959..1f611646 100755
--- a/drv/ser.h
+++ b/drv/ser.h
@@ -14,6 +14,9 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.18  2004/12/08 08:57:17  bernie
+ *#* Rename time_t to mtime_t.
+ *#*
  *#* Revision 1.17  2004/11/16 21:54:56  bernie
  *#* Changes for SC Monoboard support.
  *#*
@@ -104,6 +107,14 @@
 	#define SERRF_FRAMEERROR     BV(9)  /*!< Stop bit missing */
 	#define SERRF_NOISEERROR     BV(10) /*!< Noise error */
 	#define SERRF_RXSROVERRUN    BV(11) /*!< Rx shift register overrun */
+#elif defined(_EMUL)
+	typedef uint16_t serstatus_t;
+
+	/* Software errors */
+	#define SERRF_RXFIFOOVERRUN  BV(0)  /*!< Rx FIFO buffer overrun */
+	#define SERRF_RXTIMEOUT      BV(1)  /*!< Receive timeout */
+	#define SERRF_TXTIMEOUT      BV(2)  /*!< Transmit timeout */
+
 #else
 	#error unknown architecture
 #endif
@@ -153,6 +164,11 @@ enum
 	SER_UART0,
 	SER_PUNTALI,
 	SER_BARCODE,
+#elif defined(_EMUL)
+	SER_UART0,
+	#if CONFIG_EMUL_UART1
+		SER_UART1,
+	#endif
 #else
 	#error unknown architecture
 #endif
@@ -188,10 +204,10 @@ struct Serial
 	/* \} */
 
 #if CONFIG_SER_RXTIMEOUT != -1
-	time_t rxtimeout;
+	mtime_t rxtimeout;
 #endif
 #if CONFIG_SER_TXTIMEOUT != -1
-	time_t txtimeout;
+	mtime_t txtimeout;
 #endif
 
 	/*! Holds the flags defined above.  Will be 0 when no errors have occurred. */
@@ -218,8 +234,8 @@ extern int ser_gets_echo(struct Serial *port, char *buf, int size, bool echo);
 
 extern void ser_setbaudrate(struct Serial *port, unsigned long rate);
 extern void ser_setparity(struct Serial *port, int parity);
-extern void ser_settimeouts(struct Serial *port, time_t rxtimeout, time_t txtimeout);
-extern void ser_resync(struct Serial *port, time_t delay);
+extern void ser_settimeouts(struct Serial *port, mtime_t rxtimeout, mtime_t txtimeout);
+extern void ser_resync(struct Serial *port, mtime_t delay);
 extern void ser_purge(struct Serial *port);
 extern void ser_drain(struct Serial *port);