arighi [Wed, 28 Apr 2010 20:24:51 +0000 (20:24 +0000)]
lm3s8962: add an example application for this specific board.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3568
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Wed, 28 Apr 2010 20:24:39 +0000 (20:24 +0000)]
CM3: add support for the LM3S8962 evaluation board.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3567
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Wed, 28 Apr 2010 20:24:29 +0000 (20:24 +0000)]
lm3s1968: be sure to enable clock gating for GPIO port G before using any of the associated pin.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3566
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Wed, 28 Apr 2010 16:23:38 +0000 (16:23 +0000)]
Add logic for the path choice.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3565
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Wed, 28 Apr 2010 15:01:07 +0000 (15:01 +0000)]
Add abstraction layer for toolchains.
NOTE: this should be tested heavily.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3564
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Wed, 28 Apr 2010 14:19:14 +0000 (14:19 +0000)]
Add avr tag for widzard.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3563
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Wed, 28 Apr 2010 13:13:22 +0000 (13:13 +0000)]
Use log module, implement recv function. Some little refactor and update the cfg file.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3562
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Wed, 28 Apr 2010 13:11:59 +0000 (13:11 +0000)]
Clean up.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3561
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Wed, 28 Apr 2010 13:11:41 +0000 (13:11 +0000)]
Update cfg to silent warning.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3560
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Wed, 28 Apr 2010 12:51:21 +0000 (12:51 +0000)]
Fix xmodem send. Use log module.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3559
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Wed, 28 Apr 2010 11:59:45 +0000 (11:59 +0000)]
Add support for flash sizes on all supported AT91SAM7 cpus.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3558
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Wed, 28 Apr 2010 10:25:39 +0000 (10:25 +0000)]
Update the hw and cfg thermo files.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3557
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Wed, 28 Apr 2010 08:42:03 +0000 (08:42 +0000)]
Remove useless while loops
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3556
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 21:25:53 +0000 (21:25 +0000)]
Remove duplicate defines.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3555
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 20:29:24 +0000 (20:29 +0000)]
Add pwm register definitions.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3554
38d2e660-2303-0410-9eaa-
f027e97ec537
batt [Tue, 27 Apr 2010 16:57:38 +0000 (16:57 +0000)]
Avoid recursion on string.replace()
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3553
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Tue, 27 Apr 2010 16:16:02 +0000 (16:16 +0000)]
LPC2: add a UART driver testcase to the example.
Start a simple "echo" terminal on UART1 at the end of the startup tests.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3552
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 15:35:00 +0000 (15:35 +0000)]
Add comment for the new internal version.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3551
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 15:32:28 +0000 (15:32 +0000)]
Copy the user mk file of the preset, replacing the old preset name with the project name.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3550
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 15:20:54 +0000 (15:20 +0000)]
Some refactor. Clean up. Add comments.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3549
38d2e660-2303-0410-9eaa-
f027e97ec537
batt [Tue, 27 Apr 2010 14:40:54 +0000 (14:40 +0000)]
Shorten variable name.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3548
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 14:10:40 +0000 (14:10 +0000)]
Add new internal version
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3547
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 14:05:51 +0000 (14:05 +0000)]
Fix relative/absolute path issuew
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3546
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 14:01:59 +0000 (14:01 +0000)]
Revert to the old one.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3545
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Tue, 27 Apr 2010 13:51:26 +0000 (13:51 +0000)]
LPC2: do not include UART driver to the nightly test build sources.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3544
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Tue, 27 Apr 2010 13:51:25 +0000 (13:51 +0000)]
LPC2: include the UART driver into the generic driver ser_arm.c.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3543
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Tue, 27 Apr 2010 13:42:09 +0000 (13:42 +0000)]
lm3s1968: merge the DevelGPS example application.
The purpose of this project is to implement a portable GPS locator / geocaching
finder tool using the Cortex-M3 based Luminary Micro LM3S1968 evaluation board.
The device proposes a user interface to configure the GPS coordinates of a
target location and shows on the OLED display the direction and distance to
reach the target.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3542
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 13:23:12 +0000 (13:23 +0000)]
Add relpath module, for python < 2.6.0
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3541
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 13:21:56 +0000 (13:21 +0000)]
Modify the copytree code to use the copytree shipped with the standard os.path for python2.6
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3540
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 13:20:52 +0000 (13:20 +0000)]
Rever wrong commit.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3539
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Tue, 27 Apr 2010 13:16:26 +0000 (13:16 +0000)]
lm3s1968: update UART configuration in the example.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3538
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Tue, 27 Apr 2010 13:16:25 +0000 (13:16 +0000)]
LPC2: UART driver.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3537
38d2e660-2303-0410-9eaa-
f027e97ec537
batt [Tue, 27 Apr 2010 10:52:44 +0000 (10:52 +0000)]
Fix problems with older BeRTOS versions.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3536
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 10:48:41 +0000 (10:48 +0000)]
Add process to use module with kernel. Move some define from hw to module. Use log. Clean up.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3535
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 10:44:53 +0000 (10:44 +0000)]
Add ntc log config.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3534
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 10:25:09 +0000 (10:25 +0000)]
New makefile architecture.
NOTE: all the new infrastructure is under development. IT HAS TO BE TESTED HEAVILY.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3533
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 09:40:36 +0000 (09:40 +0000)]
Add log module and use temp types.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3532
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 09:39:37 +0000 (09:39 +0000)]
Add comment.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3531
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 09:39:15 +0000 (09:39 +0000)]
Fix if.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3530
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 09:38:34 +0000 (09:38 +0000)]
Clean up.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3529
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 09:38:18 +0000 (09:38 +0000)]
Clean up.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3528
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Tue, 27 Apr 2010 09:33:33 +0000 (09:33 +0000)]
Clean up. Add set polarity prototype.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3527
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 09:30:28 +0000 (09:30 +0000)]
In editing mode when the user selects a project that was created with older versions of the wizard, the old makefile format is used.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3526
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Tue, 27 Apr 2010 09:17:10 +0000 (09:17 +0000)]
lm3s1968: internal flash memory driver.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3525
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Tue, 27 Apr 2010 09:17:09 +0000 (09:17 +0000)]
rit128x96: correctly check for out-of-bounds pixels in lcd_start_blit().
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3524
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 09:12:23 +0000 (09:12 +0000)]
Add missing import.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3523
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 08:53:15 +0000 (08:53 +0000)]
More logic into makefiles generation functions
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3522
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 27 Apr 2010 08:52:27 +0000 (08:52 +0000)]
Add more explicative comment for latest internal version
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3521
38d2e660-2303-0410-9eaa-
f027e97ec537
batt [Mon, 26 Apr 2010 16:03:08 +0000 (16:03 +0000)]
Use PRESET_NAME instead of PROJECT_NAME when creating a project from a preset (to remove preset unuseful files).
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3520
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Mon, 26 Apr 2010 15:38:41 +0000 (15:38 +0000)]
Add comment.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3519
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Mon, 26 Apr 2010 15:37:51 +0000 (15:37 +0000)]
Avoid to create a new VERSION file for presets, in editing mode.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3518
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Mon, 26 Apr 2010 14:26:17 +0000 (14:26 +0000)]
If the project edited is a preset the wizard doesn't add the following stuff:
* VERSION file (it's still copied, I'm investigating...)
* Makefile
* new sources
* hw dir containing the hw files
* autogenerated mk file
* project files for the IDEs
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3517
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Mon, 26 Apr 2010 13:53:31 +0000 (13:53 +0000)]
Add new _wizard_version for differentiate the newest ones that use "BERTOS_PATH" from the older ones that use "SOURCES_PATH".
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3516
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Mon, 26 Apr 2010 13:48:10 +0000 (13:48 +0000)]
Change SOURCES_PATH in BERTOS_PATH.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3515
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Mon, 26 Apr 2010 13:27:33 +0000 (13:27 +0000)]
Add support for parametrization of the sources dir and the project sources dir.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3514
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Fri, 23 Apr 2010 15:37:26 +0000 (15:37 +0000)]
lm3s1968: add a busy wait sleep when enabling or disabling the UART peripheral.
This is an enforcement to be sure the peripheral is actually enabled or
disabled on return from lm3s_uartEnable()/lm3s_uartDisable().
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3513
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 15:11:02 +0000 (15:11 +0000)]
Use PROJECT_NAME instead of os.path.basename(PROJECT_PATH)
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3512
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Fri, 23 Apr 2010 14:58:46 +0000 (14:58 +0000)]
lm3s1968: use the fixed-width Gohufont in the example.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3511
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Fri, 23 Apr 2010 14:58:45 +0000 (14:58 +0000)]
font: add fixed-width Gohufont.
See also: http://font.gohu.eu.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3510
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Fri, 23 Apr 2010 14:58:44 +0000 (14:58 +0000)]
rit128x96: allow to define starting x and y coordinates with rit128x96_blitRaw().
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3509
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 14:50:01 +0000 (14:50 +0000)]
Add information about project source path.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3508
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 13:09:34 +0000 (13:09 +0000)]
Add information for advanced preset editing.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3507
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 12:34:04 +0000 (12:34 +0000)]
Use " instead of ' for BProject file (to follow the BeRTOS wizard coding standard).
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3506
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 11:11:09 +0000 (11:11 +0000)]
Fix existing directory problem with copytree.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3505
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 10:24:01 +0000 (10:24 +0000)]
Create an empty file if the user select the box.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3504
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 10:14:07 +0000 (10:14 +0000)]
Creating a new project from a preset the Wizard copy also the files contained into the preset project dir.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3503
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 09:32:52 +0000 (09:32 +0000)]
Avoid the manual join of paths, using os.path.join.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3502
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 09:25:41 +0000 (09:25 +0000)]
Add placeholder comment
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3501
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 09:16:21 +0000 (09:16 +0000)]
Add properties to retrieve the project relevant dirs.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3500
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 09:16:03 +0000 (09:16 +0000)]
Add information to project.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3499
38d2e660-2303-0410-9eaa-
f027e97ec537
asterix [Fri, 23 Apr 2010 08:55:26 +0000 (08:55 +0000)]
Compute duty cycle according to pwm polarity before to set it.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3498
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Fri, 23 Apr 2010 08:11:06 +0000 (08:11 +0000)]
Remove not needed edit checks.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3497
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Thu, 22 Apr 2010 21:57:33 +0000 (21:57 +0000)]
lm3s1968: set the correct GPIO registers when enabling the peripheral clock for UART1 and UART2.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3496
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Thu, 22 Apr 2010 21:57:27 +0000 (21:57 +0000)]
rit128x96: introduce rit128x96_blitRaw() to draw a raw image on screen.
Moreover, fix the function naming according to the coding style.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3495
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Wed, 21 Apr 2010 13:55:25 +0000 (13:55 +0000)]
CM3: ensure that all processes have eight-byte stack alignment.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3494
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Wed, 21 Apr 2010 13:55:24 +0000 (13:55 +0000)]
lm3s1968: improve the example with GUI enhancements, keypad driver and menu.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3493
38d2e660-2303-0410-9eaa-
f027e97ec537
arighi [Wed, 21 Apr 2010 13:55:23 +0000 (13:55 +0000)]
gui: refresh the local bitmap instead of referencing the global symbol lcd_bitmap.
This avoid to declare a global symbol lcd_bitmap when using the smooth
menu scrolling.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3492
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 19:08:02 +0000 (19:08 +0000)]
Reuse most of the available code.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3491
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 16:41:05 +0000 (16:41 +0000)]
Remove the 'edit' parameter, no more needed.
TODO: the refactoring is work in progress. The duplicated code will be removed as soon as possible :)
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3490
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 16:18:37 +0000 (16:18 +0000)]
Add method to create the sources dir into the project.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3489
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 16:14:44 +0000 (16:14 +0000)]
Add method for version file
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3488
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 16:07:46 +0000 (16:07 +0000)]
Split the createBertosProject method.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3487
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 15:30:22 +0000 (15:30 +0000)]
Add missing import
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3486
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 15:25:24 +0000 (15:25 +0000)]
Move createBertosProject as BProject method
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3485
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 14:44:00 +0000 (14:44 +0000)]
Add wait cursor during preset loading.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3484
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 14:43:39 +0000 (14:43 +0000)]
Select the current preset when the user go back after preset selection
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3483
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 14:32:22 +0000 (14:32 +0000)]
Stub of preset load method.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3482
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 13:53:18 +0000 (13:53 +0000)]
Add _ before the name of new 'private' methods.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3481
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 13:50:20 +0000 (13:50 +0000)]
Remove trailing spaces.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3480
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 13:49:02 +0000 (13:49 +0000)]
Add setEnabledModules as method of BProject class (instead of function).
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3479
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 13:41:46 +0000 (13:41 +0000)]
Split loadBertosProject method to reuse most of the code for presets.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3478
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 12:27:16 +0000 (12:27 +0000)]
Add stub of project loading from preset.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3477
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 10:34:23 +0000 (10:34 +0000)]
Save the project preset path into the project.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3476
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 10:12:07 +0000 (10:12 +0000)]
Add implementation for the isComplete method override.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3475
38d2e660-2303-0410-9eaa-
f027e97ec537
duplo [Tue, 20 Apr 2010 07:51:24 +0000 (07:51 +0000)]
Fix regression.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3474
38d2e660-2303-0410-9eaa-
f027e97ec537
batt [Mon, 19 Apr 2010 22:54:33 +0000 (22:54 +0000)]
Heap: refactor in order to add more tests.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3473
38d2e660-2303-0410-9eaa-
f027e97ec537
batt [Mon, 19 Apr 2010 22:53:42 +0000 (22:53 +0000)]
Typos.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3472
38d2e660-2303-0410-9eaa-
f027e97ec537
batt [Mon, 19 Apr 2010 22:52:01 +0000 (22:52 +0000)]
Reformat.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3471
38d2e660-2303-0410-9eaa-
f027e97ec537
batt [Mon, 19 Apr 2010 22:49:56 +0000 (22:49 +0000)]
Heap: add heap_freeSpace(), a new function.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3470
38d2e660-2303-0410-9eaa-
f027e97ec537
batt [Mon, 19 Apr 2010 22:41:40 +0000 (22:41 +0000)]
heap: Fix heap_freemem() when all the heap is full.
git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3469
38d2e660-2303-0410-9eaa-
f027e97ec537
projects / bertos.git / log