From 17558678cba8c31e9225e607539e05b34f83d173 Mon Sep 17 00:00:00 2001
From: asterix <asterix@38d2e660-2303-0410-9eaa-f027e97ec537>
Date: Tue, 27 May 2008 16:49:51 +0000
Subject: [PATCH] Use specific config for serial module.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@1399 38d2e660-2303-0410-9eaa-f027e97ec537
---
 app/triface/cfg/cfg_ser.h | 118 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)
 create mode 100644 app/triface/cfg/cfg_ser.h

diff --git a/app/triface/cfg/cfg_ser.h b/app/triface/cfg/cfg_ser.h
new file mode 100644
index 00000000..eb11a4cb
--- /dev/null
+++ b/app/triface/cfg/cfg_ser.h
@@ -0,0 +1,118 @@
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for serial module.
+ *
+ * \version $Id$
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */ 
+
+#ifndef CFG_SER_H
+#define CFG_SER_H
+
+
+/// Kdebug console on debug unit
+#define CONFIG_TRIFACE_PORT      0
+
+/// Baud-rate for the kdebug console
+#define CONFIG_TRIFACE_BAUDRATE  115200
+
+/// [bytes] Size of the outbound FIFO buffer for port 0. 
+#define CONFIG_UART0_TXBUFSIZE  32
+
+/// [bytes] Size of the inbound FIFO buffer for port 0. 
+#define CONFIG_UART0_RXBUFSIZE  64
+
+/// [bytes] Size of the outbound FIFO buffer for port 1. 
+#define CONFIG_UART1_TXBUFSIZE  32
+
+/// [bytes] Size of the inbound FIFO buffer for port 1. 
+#define CONFIG_UART1_RXBUFSIZE  64
+
+
+/// [bytes] Size of the outbound FIFO buffer for SPI port (AVR only) 
+#define CONFIG_SPI_TXBUFSIZE    32
+
+/// [bytes] Size of the inbound FIFO buffer for SPI port (AVR only) 
+#define CONFIG_SPI_RXBUFSIZE    32
+
+/// [bytes] Size of the outbound FIFO buffer for SPI port 0. 
+#define CONFIG_SPI0_TXBUFSIZE	32
+
+/// [bytes] Size of the inbound FIFO buffer for SPI port 0. 
+#define CONFIG_SPI0_RXBUFSIZE	32
+
+/// [bytes] Size of the outbound FIFO buffer for SPI port 1. 
+#define CONFIG_SPI1_TXBUFSIZE	32
+
+/// [bytes] Size of the inbound FIFO buffer for SPI port 1. 
+#define CONFIG_SPI1_RXBUFSIZE	32
+
+/// SPI data order (AVR only). 
+#define CONFIG_SPI_DATA_ORDER	SER_MSB_FIRST
+
+/// SPI clock division factor (AVR only). 
+#define CONFIG_SPI_CLOCK_DIV	16
+
+/// SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). 
+#define CONFIG_SPI_CLOCK_POL	0
+
+/// SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). 
+#define CONFIG_SPI_CLOCK_PHASE	0
+
+/// Default transmit timeout (ms). Set to -1 to disable timeout support.
+#define CONFIG_SER_TXTIMEOUT    100
+
+/// Default receive timeout (ms). Set to -1 to disable timeout support.
+#define CONFIG_SER_RXTIMEOUT    100
+
+/// Use RTS/CTS handshake 
+#define CONFIG_SER_HWHANDSHAKE   0
+
+/// Default baud rate (set to 0 to disable).
+#define CONFIG_SER_DEFBAUDRATE   0
+
+/// Enable second serial port in emulator. 
+#define CONFIG_EMUL_UART1        0
+
+/**
+ * Transmit always something on serial port 0 TX
+ * to avoid interference when sending burst of data,
+ * using AVR multiprocessor serial mode
+ */
+#define CONFIG_SER_TXFILL        0
+
+/// For serial debug.
+#define CONFIG_SER_STROBE        0
+
+#endif /* CFG_SER_H */
-- 
2.25.1