From 2b387e02ffd797dc8c68e072d29e445821189559 Mon Sep 17 00:00:00 2001
From: batt <batt@38d2e660-2303-0410-9eaa-f027e97ec537>
Date: Wed, 26 May 2010 17:32:32 +0000
Subject: [PATCH] Remove broken debug uart name.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3851 38d2e660-2303-0410-9eaa-f027e97ec537
---
 bertos/cpu/cortex-m3/drv/kdebug_lm3s.c  |  6 ------
 bertos/cpu/cortex-m3/drv/kdebug_lm3s.h  | 11 +----------
 bertos/cpu/cortex-m3/drv/kdebug_stm32.c |  6 ------
 bertos/cpu/cortex-m3/drv/kdebug_stm32.h | 11 +----------
 4 files changed, 2 insertions(+), 32 deletions(-)

diff --git a/bertos/cpu/cortex-m3/drv/kdebug_lm3s.c b/bertos/cpu/cortex-m3/drv/kdebug_lm3s.c
index 568920ec..30258846 100644
--- a/bertos/cpu/cortex-m3/drv/kdebug_lm3s.c
+++ b/bertos/cpu/cortex-m3/drv/kdebug_lm3s.c
@@ -42,8 +42,6 @@
 #include <drv/ser_lm3s.h>
 #include "kdebug_lm3s.h"
 
-#if CONFIG_KDEBUG_PORT == KDEBUG_PORT_DBGU
-
 #if CONFIG_KDEBUG_PORT == 0
 	#define UART_BASE UART0_BASE
 	#define UART_GPIO_BASE GPIO_PORTA_BASE
@@ -76,10 +74,6 @@
 
 typedef uint32_t kdbg_irqsave_t;
 
-#else
-#error CONFIG_KDEBUG_PORT should be KDEBUG_PORT_DBGU
-#endif
-
 INLINE void uart_hw_config(void)
 {
 	unsigned long div, baud = CONFIG_KDEBUG_BAUDRATE;
diff --git a/bertos/cpu/cortex-m3/drv/kdebug_lm3s.h b/bertos/cpu/cortex-m3/drv/kdebug_lm3s.h
index 4335d898..faabef4e 100644
--- a/bertos/cpu/cortex-m3/drv/kdebug_lm3s.h
+++ b/bertos/cpu/cortex-m3/drv/kdebug_lm3s.h
@@ -38,16 +38,7 @@
 #ifndef DRV_KDEBUG_LM3S_H
 #define DRV_KDEBUG_LM3S_H
 
-/**
- * \name Values for CONFIG_KDEBUG_PORT.
- *
- * Select which hardware UART to use for system debug.
- *
- * \{
- */
-#define KDEBUG_PORT_DBGU 0  ///< Debug on Debug Unit.
-
-#define KDEBUG_PORT_DEFAULT KDEBUG_PORT_DBGU  ///< Default debug port.
+#define KDEBUG_PORT_DEFAULT 0  ///< Default debug port.
 /* \} */
 
 #endif /* DRV_KDEBUG_LM3S_H */
diff --git a/bertos/cpu/cortex-m3/drv/kdebug_stm32.c b/bertos/cpu/cortex-m3/drv/kdebug_stm32.c
index f4368b7e..f50f3d89 100644
--- a/bertos/cpu/cortex-m3/drv/kdebug_stm32.c
+++ b/bertos/cpu/cortex-m3/drv/kdebug_stm32.c
@@ -111,8 +111,6 @@ struct stm32_usart
 #define USART_LASTBIT_DISABLE     ((uint16_t)0x0000)
 #define USART_LASTBIT_ENABLE      ((uint16_t)0x0100)
 
-#if CONFIG_KDEBUG_PORT == KDEBUG_PORT_DBGU
-
 #if CONFIG_KDEBUG_PORT == 0
 	#define UART_BASE ((struct stm32_usart *)USART1_BASE)
 #elif CONFIG_KDEBUG_PORT == 1
@@ -136,10 +134,6 @@ struct stm32_usart
 
 typedef uint32_t kdbg_irqsave_t;
 
-#else
-#error CONFIG_KDEBUG_PORT should be KDEBUG_PORT_DBGU
-#endif
-
 #define GPIO_USART1_TX_PIN	(1 << 9)
 #define GPIO_USART1_RX_PIN	(1 << 10)
 
diff --git a/bertos/cpu/cortex-m3/drv/kdebug_stm32.h b/bertos/cpu/cortex-m3/drv/kdebug_stm32.h
index ed51dbe1..acb71a56 100644
--- a/bertos/cpu/cortex-m3/drv/kdebug_stm32.h
+++ b/bertos/cpu/cortex-m3/drv/kdebug_stm32.h
@@ -38,16 +38,7 @@
 #ifndef DRV_KDEBUG_STM32_H
 #define DRV_KDEBUG_STM32_H
 
-/**
- * \name Values for CONFIG_KDEBUG_PORT.
- *
- * Select which hardware UART to use for system debug.
- *
- * \{
- */
-#define KDEBUG_PORT_DBGU 1  ///< Debug on Debug Unit.
-
-#define KDEBUG_PORT_DEFAULT KDEBUG_PORT_DBGU  ///< Default debug port.
+#define KDEBUG_PORT_DEFAULT 1  ///< Default debug port.
 /* \} */
 
 #endif /* DRV_KDEBUG_STM32_H */
-- 
2.25.1