From 2c75090ef4550e4b07ae4da872b76ac73b7e9f03 Mon Sep 17 00:00:00 2001
From: arighi <arighi@38d2e660-2303-0410-9eaa-f027e97ec537>
Date: Fri, 26 Mar 2010 16:12:43 +0000
Subject: [PATCH] lm3s1968: define the architecture's startup routine.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@3278 38d2e660-2303-0410-9eaa-f027e97ec537
---
 bertos/cpu/cortex-m3/startup_lm3s.c | 144 ++++++++++++++++++++++++++++
 1 file changed, 144 insertions(+)
 create mode 100644 bertos/cpu/cortex-m3/startup_lm3s.c

diff --git a/bertos/cpu/cortex-m3/startup_lm3s.c b/bertos/cpu/cortex-m3/startup_lm3s.c
new file mode 100644
index 00000000..87c603fa
--- /dev/null
+++ b/bertos/cpu/cortex-m3/startup_lm3s.c
@@ -0,0 +1,144 @@
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Cortex-M3 architecture's entry point
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ */
+
+#include <cfg/debug.h>
+#include "drv/irq.h"
+
+extern size_t _etext, __data_start, __data_end,
+		__bss_start, __bss_end, __stack_irq_end;
+
+extern int main(void);
+
+/* Architecture's entry point */
+static void _entry(void)
+{
+	size_t *src, *dst;
+
+	/* Copy the data segment initializers from flash to SRAM */
+	src = &_etext;
+	for (dst = &__data_start; dst < &__data_end ; )
+		*dst++ = *src++;
+
+	/* Zero fill the bss segment */
+	for (dst = &__bss_start; dst < &__bss_end ; )
+		*dst++ = 0;
+
+	/* Initialize IRQ vector table in RAM */
+	sysirq_init();
+
+	/* Call the application's entry point */
+	main();
+}
+
+static void nmi_isr(void)
+{
+	ASSERT(0);
+}
+
+static void fault_isr(void)
+{
+	ASSERT(0);
+}
+
+static void default_isr(void)
+{
+	ASSERT(0);
+}
+
+/* Startup vector table */
+static void (* const irq_vectors[])(void) __attribute__ ((section(".vectors"))) = {
+	(void (*)(void))&__stack_irq_end,	/* Initial stack pointer */
+	_entry,		/* The reset handler */
+	nmi_isr,	/* The NMI handler */
+	fault_isr,	/* The hard fault handler */
+	default_isr,	/* The MPU fault handler */
+	default_isr,	/* The bus fault handler */
+	default_isr,	/* The usage fault handler */
+	0,		/* Reserved */
+	0,		/* Reserved */
+	0,		/* Reserved */
+	0,		/* Reserved */
+	default_isr,	/* SVCall handler */
+	default_isr,	/* Debug monitor handler */
+	0,		/* Reserved */
+	default_isr,	/* The PendSV handler */
+	default_isr,	/* The SysTick handler */
+	default_isr,	/* GPIO Port A */
+	default_isr,	/* GPIO Port B */
+	default_isr,	/* GPIO Port C */
+	default_isr,	/* GPIO Port D */
+	default_isr,	/* GPIO Port E */
+	default_isr,	/* UART0 Rx and Tx */
+	default_isr,	/* UART1 Rx and Tx */
+	default_isr,	/* SSI0 Rx and Tx */
+	default_isr,	/* I2C0 Master and Slave */
+	default_isr,	/* PWM Fault */
+	default_isr,	/* PWM Generator 0 */
+	default_isr,	/* PWM Generator 1 */
+	default_isr,	/* PWM Generator 2 */
+	default_isr,	/* Quadrature Encoder 0 */
+	default_isr,	/* ADC Sequence 0 */
+	default_isr,	/* ADC Sequence 1 */
+	default_isr,	/* ADC Sequence 2 */
+	default_isr,	/* ADC Sequence 3 */
+	default_isr,	/* Watchdog timer */
+	default_isr,	/* Timer 0 subtimer A */
+	default_isr,	/* Timer 0 subtimer B */
+	default_isr,	/* Timer 1 subtimer A */
+	default_isr,	/* Timer 1 subtimer B */
+	default_isr,	/* Timer 2 subtimer A */
+	default_isr,	/* Timer 2 subtimer B */
+	default_isr,	/* Analog Comparator 0 */
+	default_isr,	/* Analog Comparator 1 */
+	default_isr,	/* Analog Comparator 2 */
+	default_isr,	/* System Control (PLL, OSC, BO) */
+	default_isr,	/* FLASH Control */
+	default_isr,	/* GPIO Port F */
+	default_isr,	/* GPIO Port G */
+	default_isr,	/* GPIO Port H */
+	default_isr,	/* UART2 Rx and Tx */
+	default_isr,	/* SSI1 Rx and Tx */
+	default_isr,	/* Timer 3 subtimer A */
+	default_isr,	/* Timer 3 subtimer B */
+	default_isr,	/* I2C1 Master and Slave */
+	default_isr,	/* Quadrature Encoder 1 */
+	default_isr,	/* CAN0 */
+	default_isr,	/* CAN1 */
+	default_isr,	/* CAN2 */
+	default_isr,	/* Ethernet */
+	default_isr	/* Hibernate */
+};
-- 
2.25.1