*
* \brief Configuration file for serial module.
*
- * \version $Id$
- *
* \author Daniele Basile <asterix@develer.com>
*/
* Edit these define for your project.
*/
-/// Serial port settings. $WIZARD = { "type" : "int" }
-#define CONFIG_SER_PORT 0
-/// Serial port baudrate. $WIZARD = { "type" : "int" }
-#define CONFIG_SER_BAUDRATE 115200UL
-
-/// Spi port settings. $WIZARD = { "type" : "int" }
-#define CONFIG_SPI_PORT 0
-/// Spi port baudrate. $WIZARD = { "type" : "int" }
-#define CONFIG_SPI_BAUDRATE 5000000UL
-
+/**
+ * Enable port 0
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega"
+ */
+#define CONFIG_UART0_ENABLED 1
-/// [bytes] Size of the outbound FIFO buffer for port 0. $WIZARD = { "type" : "int" }
+/**
+ * Size of the outbound FIFO buffer for port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
#define CONFIG_UART0_TXBUFSIZE 32
-/// [bytes] Size of the inbound FIFO buffer for port 0. $WIZARD = { "type" : "int" }
+/**
+ * Size of the inbound FIFO buffer for port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
#define CONFIG_UART0_RXBUFSIZE 32
-/// [bytes] Size of the outbound FIFO buffer for port 1. $WIZARD = { "type" : "int" }
+/**
+ * Enable port 1
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega"
+ */
+#define CONFIG_UART1_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or xmega or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ */
#define CONFIG_UART1_TXBUFSIZE 32
-/// [bytes] Size of the inbound FIFO buffer for port 1. $WIZARD = { "type" : "int" }
+/**
+ * Size of the inbound FIFO buffer for port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or xmega or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ */
#define CONFIG_UART1_RXBUFSIZE 32
+/**
+ * Enable port 2
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and (not xmegad4)"
+ */
+#define CONFIG_UART2_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 2 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or (xmega and not xmegad4)"
+ */
+#define CONFIG_UART2_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 2 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or (xmega and not xmegad4)"
+ */
+#define CONFIG_UART2_RXBUFSIZE 32
+
+/**
+ * Enable port 3
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART3_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 3 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lpc2 or xmega and not xmegad4"
+ */
+#define CONFIG_UART3_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 3 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lpc2 or xmega and not xmegad4"
+ */
+#define CONFIG_UART3_RXBUFSIZE 32
+
+/**
+ * Enable port 4
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 4 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 4 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_RXBUFSIZE 32
+
+/**
+ * Enable port 5
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 5 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 5 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_RXBUFSIZE 32
+
+/**
+ * Enable port 6
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 6 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 6 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_RXBUFSIZE 32
+
+/**
+ * Enable port 7
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 7 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 7 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_RXBUFSIZE 32
-/// [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). $WIZARD = { "type" : "int" }
+/**
+ * Size of the outbound FIFO buffer for SPI port [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "avr and not xmega"
+ */
#define CONFIG_SPI_TXBUFSIZE 32
-/// [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). $WIZARD = { "type" : "int" }
+/**
+ * Size of the inbound FIFO buffer for SPI port [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "avr and not xmega"
+ */
#define CONFIG_SPI_RXBUFSIZE 32
-/// [bytes] Size of the outbound FIFO buffer for SPI port 0. $WIZARD = { "type" : "int" }
+/**
+ * Size of the outbound FIFO buffer for SPI port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
#define CONFIG_SPI0_TXBUFSIZE 32
-/// [bytes] Size of the inbound FIFO buffer for SPI port 0. $WIZARD = { "type" : "int" }
+/**
+ * Size of the inbound FIFO buffer for SPI port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
#define CONFIG_SPI0_RXBUFSIZE 32
-/// [bytes] Size of the outbound FIFO buffer for SPI port 1. $WIZARD = { "type" : "int" }
+/**
+ * Size of the outbound FIFO buffer for SPI port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
#define CONFIG_SPI1_TXBUFSIZE 32
-/// [bytes] Size of the inbound FIFO buffer for SPI port 1. $WIZARD = { "type" : "int" }
+/**
+ * Size of the inbound FIFO buffer for SPI port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
#define CONFIG_SPI1_RXBUFSIZE 32
/**
- * SPI data order (AVR only).
+ * SPI data order.
*
- * $WIZARD = {
- * "type" : "enum",
- * "value_list" : "ser_order_bit"
- * }
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "ser_order_bit"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
-/// SPI clock division factor (AVR only). $WIZARD = { "type" : "int" }
+/**
+ * SPI clock division factor.
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "avr and not xmega"
+ */
#define CONFIG_SPI_CLOCK_DIV 16
+
/**
- * SPI clock polarity: normal low or normal high (AVR only).
- * $WIZARD = {
- * "type" : "enum",
- * "value_list" : "ser_spi_pol"
- * }
+ * SPI clock polarity: normal low or normal high.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "ser_spi_pol"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
/**
* SPI clock phase you can choose sample on first edge or
- * sample on second clock edge (AVR only)
- * $WIZARD = {
- * "type" : "enum",
- * "value_list" : "ser_spi_phase"
- * }
+ * sample on second clock edge.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "ser_spi_phase"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
-/// Default transmit timeout (ms). Set to -1 to disable timeout support. $WIZARD = { "type" : "int" }
+/**
+ * Default transmit timeout (ms). Set to -1 to disable timeout support.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = -1
+ */
#define CONFIG_SER_TXTIMEOUT -1
-/// Default receive timeout (ms). Set to -1 to disable timeout support. $WIZARD = { "type" : "int" }
+/**
+ * Default receive timeout (ms). Set to -1 to disable timeout support.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = -1
+ */
#define CONFIG_SER_RXTIMEOUT -1
-/// Use RTS/CTS handshake. $WIZARD = { "type" : "boolean" }
+/**
+ * Use RTS/CTS handshake.
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "False"
+ */
#define CONFIG_SER_HWHANDSHAKE 0
-/// Default baud rate (set to 0 to disable). $WIZARD = { "type" : "boolean" }
-#define CONFIG_SER_DEFBAUDRATE 0
-
-/// Enable ser_gets() and ser_gets_echo(). $WIZARD = { "type" : "boolean" }
-#define CONFIG_SER_GETS 0
-
-/// Enable second serial port in emulator. $WIZARD = { "type" : "boolean" }
-#define CONFIG_EMUL_UART1 0
+/**
+ * Default baudrate for all serial ports (set to 0 to disable).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_SER_DEFBAUDRATE 0UL
-/// For serial debug. $WIZARD = { "type" : "boolean" }
+/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean"
#define CONFIG_SER_STROBE 0
#endif /* CFG_SER_H */
projects / bertos.git / blobdiff