Update project.

[bertos.git] / boards / stm32-p103 / templates / stm32-p103_kernel / cfg / cfg_wm8731.h

diff --git a/boards/stm32-p103/templates/stm32-p103_kernel/cfg/cfg_wm8731.h b/boards/stm32-p103/templates/stm32-p103_kernel/cfg/cfg_wm8731.h
new file mode 100644 (file)
index 0000000..76280b6
--- /dev/null
+++ b/boards/stm32-p103/templates/stm32-p103_kernel/cfg/cfg_wm8731.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the WM8731 module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_WM8731_H
+#define CFG_WM8731_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define WM8731_LOG_LEVEL      LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define WM8731_LOG_FORMAT     LOG_FMT_TERSE
+
+
+/**
+ * Digital control: ADC High pass filter
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DAPC     0
+
+
+/**
+ * Digital control: De-emphasis control
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_deemp"
+ */
+#define CONFIG_WM8731_DEEMP     WM8731_DEEMP_DISABLE
+
+/**
+ * Digital control: DAC soft mute control
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DACMU     0
+
+
+/**
+ * Analog control: Microphone boost
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MICBOOST     0
+
+/**
+ * Analog control: Microphone/Line Input select to ADC
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_insel"
+ */
+#define CONFIG_WM8731_INSEL     WM8731_INSEL_MIC
+
+
+/**
+ * Analog control: out selector
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_bypass"
+ */
+#define CONFIG_WM8731_BYPASS     WM8731_DACSEL
+
+/**
+ * Analog control: Side tone attenuation
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_sideatt"
+ */
+#define CONFIG_WM8731_SIDEATT     WM8731_SIDEATT_6dB
+
+
+/**
+ * Digital Audio interface format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_fmt"
+ */
+#define CONFIG_WM8731_INTERFACE_FORMAT    WM8731_FORMAT_I2S
+
+/**
+ * Digital Audio data bit length.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_databit"
+ */
+#define CONFIG_WM8731_IWL_BITS            WM8731_IWL_16_BIT
+
+/**
+ * Enable Master mode.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MS     0
+
+
+/**
+ * Data sampling rate, refer to datasheet for this value.
+ * $WIZ$ type = "hex"
+ */
+#define CONFIG_WM8731_SAMPLING_RATES     0x6
+
+#endif /* CFG_WM8731_H */