From: asterix Date: Mon, 8 Nov 2010 10:42:02 +0000 (+0000) Subject: Remove the tcp example, not for this release. X-Git-Tag: 2.6.1~6 X-Git-Url: https://codewiz.org/gitweb?p=bertos.git;a=commitdiff_plain;h=52782159a63ff2bf56bfd7494067e41897f65156 Remove the tcp example, not for this release. git-svn-id: https://src.develer.com/svnoss/bertos/branches/2.6@4534 38d2e660-2303-0410-9eaa-f027e97ec537 --- diff --git a/boards/at91sam7x-ek/examples/tcp_server/.spec b/boards/at91sam7x-ek/examples/tcp_server/.spec deleted file mode 100644 index 300ee40c..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/.spec +++ /dev/null @@ -1,21 +0,0 @@ -name = 'TCP/IP echo server' -description=""" -

Overview

-

-This example application demonstrates the usage of the lwIP TCP/IP stack with -BeRTOS. -<\p> -

-The DHCP protocol is used to obtain an IP address from an external DHCP server -connected via ethernet. -<\p> -

-The application then starts a TCP server listening on port 80. The server acts -as a TCP echo service, sending back to the clients all the submitted requests. -

-

-On the debugging console are reported the measured total requests and total -requests per second (reqs/s) served by the TCP service, together with the stack -usage of each process. -

-""" diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_adc.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_adc.h deleted file mode 100644 index df2587be..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_adc.h +++ /dev/null @@ -1,112 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the ADC module. - * - * \author Daniele Basile - */ - -#ifndef CFG_ADC_H -#define CFG_ADC_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define ADC_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define ADC_LOG_FORMAT LOG_FMT_VERBOSE - -/** - * Clock Frequency for ADC conversion. - * This frequency will be rounded down to an integer - * submultiple of CPU_FREQ. - * - * $WIZ$ type = "int" - * $WIZ$ supports = "at91" - * $WIZ$ max = 5000000 - */ -#define CONFIG_ADC_CLOCK 4800000UL - -/** - * Minimum time for starting up a conversion [us]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 20 - * $WIZ$ supports = "at91" - */ -#define CONFIG_ADC_STARTUP_TIME 20 - -/** - * Minimum time for sample and hold [ns]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 600 - * $WIZ$ supports = "at91" - */ -#define CONFIG_ADC_SHTIME 834 - -/** - * ADC Voltage Reference. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "avr_adc_refs" - * $WIZ$ supports = "avr" - */ -#define CONFIG_ADC_AVR_REF ADC_AVR_AVCC - -/** - * ADC clock divisor from main crystal. - * - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ max = 128 - * $WIZ$ supports = "avr" - */ -#define CONFIG_ADC_AVR_DIVISOR 2 - -/** - * Enable ADC strobe for debugging ADC ISR. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_ADC_STROBE 0 - -#endif /* CFG_ADC_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_afsk.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_afsk.h deleted file mode 100644 index cce47c1f..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_afsk.h +++ /dev/null @@ -1,113 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for AFSK1200 modem. - * - * \author Francesco Sacchi - */ - -#ifndef CFG_AFSK_H -#define CFG_AFSK_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define AFSK_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define AFSK_LOG_FORMAT LOG_FMT_TERSE - - -/** - * AFSK discriminator filter type. - * - * $WIZ$ type = "enum"; value_list = "afsk_filter_list" - */ -#define CONFIG_AFSK_FILTER AFSK_CHEBYSHEV - - -/** - * AFSK receiver buffer length. - * - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_AFSK_RX_BUFLEN 32 - -/** - * AFSK transimtter buffer length. - * - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_AFSK_TX_BUFLEN 32 - -/** - * AFSK DAC sample rate for modem outout. - * $WIZ$ type = "int" - * $WIZ$ min = 2400 - */ -#define CONFIG_AFSK_DAC_SAMPLERATE 9600 - -/** - * AFSK RX timeout in ms, set to -1 to disable. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_AFSK_RXTIMEOUT 0 - - -/** - * AFSK Preamble length in [ms], before starting transmissions. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_AFSK_PREAMBLE_LEN 300UL - - - -/** - * AFSK Trailer length in [ms], before stopping transmissions. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_AFSK_TRAILER_LEN 50UL - -#endif /* CFG_AFSK_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ax25.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ax25.h deleted file mode 100644 index f561d212..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ax25.h +++ /dev/null @@ -1,75 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the AX25 protocol module. - * - * \author Francesco Sacchi - */ - -#ifndef CFG_AX25_H -#define CFG_AX25_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define AX25_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define AX25_LOG_FORMAT LOG_FMT_TERSE - -/** - * AX25 frame buffer lenght. - * - * $WIZ$ type = "int" - * $WIZ$ min = 18 - */ -#define CONFIG_AX25_FRAME_BUF_LEN 330 - - -/** - * Enable repeaters listing in AX25 frames. - * If enabled use 56 addtional bytes of RAM - * for each message received. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_AX25_RPT_LST 1 - -#endif /* CFG_AX25_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_battfs.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_battfs.h deleted file mode 100644 index 249dda76..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_battfs.h +++ /dev/null @@ -1,67 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for BattFS module. - * - * \author Daniele Basile - */ - -#ifndef CFG_BATTFS_H -#define CFG_BATTFS_H - - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define BATTFS_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define BATTFS_LOG_FORMAT LOG_FMT_VERBOSE - -/** - * Set to 1 to enable free page shuffling. - * This increase memories life but makes debugging - * more difficult due to its unrepeteable state. - * $WIZ$ type = "boolean" - */ -#define CONFIG_BATTFS_SHUFFLE_FREE_PAGES 0 - - -#endif /* BATTFS */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_context_switch.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_context_switch.h deleted file mode 100644 index fe0b4f87..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_context_switch.h +++ /dev/null @@ -1,71 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the context switch benchmark. - * - * \author Daniele Basile - */ - -#ifndef CFG_CONTEXT_SWITCH_H -#define CFG_CONTEXT_SWITCH_H - -/** - * Use hp timer for the bechmark. - * - * $WIZ$ type = "boolean" - * $WIZ$ module= "boolean" - * $WIZ$ conditional_deps = "ser" - */ -#define CONFIG_USE_HP_TIMER 1 - - -/** - * Use board led for benchmark. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_USE_LED 1 - - -/** - * Debug console port. - * $WIZ$ type = "int"; min = 0 - */ -#define CONFIG_CTX_DEBUG_PORT 0 - -/** - * Baudrate for the debug console. - * $WIZ$ type = "int"; min = 300 - */ -#define CONFIG_CTX_DEBUG_BAUDRATE 115200UL - -#endif /* CFG_CONTEXT_SWITCH_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_dataflash.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_dataflash.h deleted file mode 100644 index 4e7dfbd9..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_dataflash.h +++ /dev/null @@ -1,55 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for data flash memory module. - * - * \author Daniele Basile - */ - -#ifndef CFG_DATAFLASH_H -#define CFG_DATAFLASH_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define DATAFLASH_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define DATAFLASH_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_DATAFLASH_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_dc_motor.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_dc_motor.h deleted file mode 100644 index fd9bac73..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_dc_motor.h +++ /dev/null @@ -1,111 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for DC motor module. - * - * - * \author Daniele Basile - */ - -#ifndef CFG_DC_MOTOR_H -#define CFG_DC_MOTOR_H - -/** - * Number of the DC motors to manage. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NUM_DC_MOTOR 4 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define DC_MOTOR_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define DC_MOTOR_LOG_FORMAT LOG_FMT_VERBOSE - - -/** - * Min value of DC motor speed. - * \note Generally this value is the min value of the ADC conversion, - * if you use it. - * - * $WIZ$ type = "int" - */ -#define CONFIG_DC_MOTOR_MIN_SPEED 0 - - -/** - * Max value of DC motor speed. - * \note Generally this value is the max value of the ADC conversion, - * if you use it. - * - * $WIZ$ type = "int" - * $WIZ$ max = 65535 - */ -#define CONFIG_DC_MOTOR_MAX_SPEED 65535 - - -/** - * Sampling period in millisecond. - * $WIZ$ type = "int" - */ -#define CONFIG_DC_MOTOR_SAMPLE_PERIOD 40 - -/** - * Amount of millisecond before to read sample. - * $WIZ$ type = "int" - */ -#define CONFIG_DC_MOTOR_SAMPLE_DELAY 2 - -/** - * This control set which mode the driver use to lock share - * resources when we use the preempitive kernel. - * If we set to 1 we use the semaphore module otherwise the - * driver disable the switch context every time we need to access - * to shared sources. - * - * $WIZ$ type = "int" - */ -#define CONFIG_DC_MOTOR_USE_SEM 1 - -#endif /* CFG_DC_MOTOR_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_debug.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_debug.h deleted file mode 100644 index 10639848..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_debug.h +++ /dev/null @@ -1,70 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for Debug module. - * - * - * \author Daniele Basile - */ - -#ifndef CFG_DEBUG_H -#define CFG_DEBUG_H - -/** - * Debug console port. - * $WIZ$ type = "int"; min = 0 - */ -#define CONFIG_KDEBUG_PORT 0 - -/** - * Baudrate for the debug console. - * $WIZ$ type = "int"; min = 300 - */ -#define CONFIG_KDEBUG_BAUDRATE 115200UL - -/** - * Clock source for the UART module. You need to write the code to reprogram the respective clock at the required frequency in your project before calling kdbg_init(). - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "kdbg_clk_src" - * $WIZ$ supports = "msp430" - */ -#define CONFIG_KDEBUG_CLOCK_SOURCE KDBG_UART_SMCLK - -/** - * Clock frequency. (Only if different from MCLK's frequency, otherwise leave it zero) - * $WIZ$ type = "int"; min = 0 - * $WIZ$ supports = "msp430" - */ -#define CONFIG_KDEBUG_CLOCK_FREQ 0UL - -#endif /* CFG_DEBUG_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_emb_flash.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_emb_flash.h deleted file mode 100644 index 82d96e52..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_emb_flash.h +++ /dev/null @@ -1,73 +0,0 @@ -/** - * \file - * - * - * \author Daniele Basile - * - * \brief Configuration file for embedded flash module. - */ - -#ifndef CFG_EMB_FLASH_H -#define CFG_EMB_FLASH_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define CONFIG_FLASH_EMB_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define CONFIG_FLASH_EMB_LOG_FORMAT LOG_FMT_TERSE - - -/** - * Write emb flash timeout. - * For how many milliseconds the cpu wait - * to complete write operation. - * - * $WIZ$ type = "int" - */ -#define CONFIG_FLASH_WR_TIMEOUT 100 - -/** - * Check this to disable embedded flash deprecated API support. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_FLASH_DISABLE_OLD_API 0 - -#endif /* CFG_FLASH_AT91_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_eth.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_eth.h deleted file mode 100644 index a3788081..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_eth.h +++ /dev/null @@ -1,57 +0,0 @@ -/** - * \file - * - * - * \author Andrea Righi - * - * \brief Configuration file for the generic ethernet driver module - */ - -#ifndef CFG_ETH_H -#define CFG_ETH_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define ETH_LOG_LEVEL LOG_LVL_WARN - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define ETH_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_ETH_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_fat.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_fat.h deleted file mode 100644 index fcd717af..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_fat.h +++ /dev/null @@ -1,156 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for Fat module. - * - * - * \author Luca Ottaviano - * \author Francesco Sacchi - */ - -#ifndef CFG_FAT_H -#define CFG_FAT_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define FAT_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define FAT_LOG_FORMAT LOG_FMT_VERBOSE - - -/** - * Use word alignment to access FAT structure. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_WORD_ACCESS 0 -#define _WORD_ACCESS CONFIG_FAT_WORD_ACCESS - -/** - * Enable read functions only. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_FS_READONLY 0 -#define _FS_READONLY CONFIG_FAT_FS_READONLY - -/** - * Minimization level to remove some functions. - * $WIZ$ type = "int"; min = 0; max = 3 - */ -#define CONFIG_FAT_FS_MINIMIZE 0 -#define _FS_MINIMIZE CONFIG_FAT_FS_MINIMIZE - -/** - * If enabled, this reduces memory consumption 512 bytes each file object by using a shared buffer. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_FS_TINY 1 -#define _FS_TINY CONFIG_FAT_FS_TINY - -/** - * To enable string functions, set _USE_STRFUNC to 1 or 2. - * $WIZ$ type = "int" - * $WIZ$ supports = "False" - */ -#define CONFIG_FAT_USE_STRFUNC 0 -#define _USE_STRFUNC CONFIG_FAT_USE_STRFUNC - -/** - * Enable f_mkfs function. Requires CONFIG_FAT_FS_READONLY = 0. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_USE_MKFS 0 -#define _USE_MKFS (CONFIG_FAT_USE_MKFS && !CONFIG_FAT_FS_READONLY) - -/** - * Enable f_forward function. Requires CONFIG_FAT_FS_TINY. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_USE_FORWARD 0 -#define _USE_FORWARD (CONFIG_FAT_USE_FORWARD && CONFIG_FAT_FS_TINY) - -/** - * Number of volumes (logical drives) to be used. - * $WIZ$ type = "int"; min = 1; max = 255 - */ -#define CONFIG_FAT_DRIVES 1 -#define _DRIVES CONFIG_FAT_DRIVES - -/** - * Maximum sector size to be handled. (512/1024/2048/4096). - * 512 for memory card and hard disk, 1024 for floppy disk, 2048 for MO disk - * $WIZ$ type = "int"; min = 512; max = 4096 - */ -#define CONFIG_FAT_MAX_SS 512 -#define _MAX_SS CONFIG_FAT_MAX_SS - -/** - * When _MULTI_PARTITION is set to 0, each volume is bound to the same physical - * drive number and can mount only first primaly partition. When it is set to 1, - * each volume is tied to the partitions listed in Drives[]. - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_FAT_MULTI_PARTITION 0 -#define _MULTI_PARTITION CONFIG_FAT_MULTI_PARTITION - -/** - * Specifies the OEM code page to be used on the target system. - * $WIZ$ type = "int" - */ -#define CONFIG_FAT_CODE_PAGE 850 -#define _CODE_PAGE CONFIG_FAT_CODE_PAGE - -/** - * Support for long filenames. Enable only if you have a valid Microsoft license. - * $WIZ$ type = "boolean" - */ -#define CONFIG_FAT_USE_LFN 0 -#define _USE_LFN CONFIG_FAT_USE_LFN - -/** - * Maximum Long File Name length to handle. - * $WIZ$ type = "int"; min = 8; max = 255 - */ -#define CONFIG_FAT_MAX_LFN 255 -#define _MAX_LFN CONFIG_FAT_MAX_LFN - -#endif /* CFG_FAT_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_flash25.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_flash25.h deleted file mode 100644 index 4b478b21..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_flash25.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for flash25 module. - * - * - * \author Daniele Basile - */ - -#ifndef CFG_FLASH25_H -#define CFG_FLASH25_H - -/** - * Eeprom memory type. - * - *$WIZ$ type = "enum" - *$WIZ$ value_list = "flash25_list" - */ -#define CONFIG_FLASH25 FLASH25_AT25F2048 - -#endif /* CFG_FALSH25_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_formatwr.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_formatwr.h deleted file mode 100644 index bac8aca7..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_formatwr.h +++ /dev/null @@ -1,65 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for formatted write module. - * - * \author Daniele Basile - */ - -#ifndef CFG_FORMATWR_H -#define CFG_FORMATWR_H - -/** - * printf()-style formatter configuration. - * $WIZ$ type = "enum"; value_list = "printf_list" - * - * \sa PRINTF_DISABLED - * \sa PRINTF_NOMODIFIERS - * \sa PRINTF_REDUCED - * \sa PRINTF_NOFLOAT - * \sa PRINTF_FULL - */ -#define CONFIG_PRINTF PRINTF_FULL - -/** - * Size of buffer to format "%" sequences in printf. - * - * Warning: no check on buffer size is done when formatting, be careful especially - * with big numbers and %f formatting. - * - * $WIZ$ type = "int" - * $WIZ$ min = 4 - */ -#define CONFIG_FRMWRI_BUFSIZE 134 - -#endif /* CFG_FORMATWR_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_gfx.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_gfx.h deleted file mode 100644 index 59dde04c..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_gfx.h +++ /dev/null @@ -1,67 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for GFX module. - * - * \author Daniele Basile - */ - -#ifndef CFG_GFX_H -#define CFG_GFX_H - -/** - * Enable line clipping algorithm. - * $WIZ$ type = "boolean" - */ -#define CONFIG_GFX_CLIPPING 1 - -/** - * Enable text rendering in bitmaps. - * $WIZ$ type = "boolean" - */ -#define CONFIG_GFX_TEXT 1 - -/** - * Enable virtual coordinate system. - * $WIZ$ type = "boolean" - */ -#define CONFIG_GFX_VCOORDS 1 - -/** - * Select bitmap pixel format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "bitmap_format" - */ -#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB - -#endif /* CFG_GFX_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_hashtable.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_hashtable.h deleted file mode 100644 index e4645f33..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_hashtable.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for hashtable module. - * - * \author Daniele Basile - */ - -#ifndef CFG_HASHTABLE_H -#define CFG_HASHTABLE_H - -/** - * Enable/disable support to declare special hash tables which maintain a copy of the key internally instead of relying on the hook to extract it from the data. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_HT_OPTIONAL_INTERNAL_KEY 1 - -#endif /* CFG_HASHTABLE_H */ - - - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_heap.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_heap.h deleted file mode 100644 index e1a37b76..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_heap.h +++ /dev/null @@ -1,50 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for heap module. - * - * - * \author Daniele Basile - */ - -#ifndef CFG_HEAP_H -#define CFG_HEAP_H - -/** - * Enable malloc/free like API. - * $WIZ$ type = "boolean" - */ -#define CONFIG_HEAP_MALLOC 1 - -#endif /* CFG_HEAP_H */ - - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_i2c.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_i2c.h deleted file mode 100644 index ea599a81..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_i2c.h +++ /dev/null @@ -1,83 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for I2C module. - * - * \author Daniele Basile - */ - -#ifndef CFG_I2C_H -#define CFG_I2C_H - -/** -*Comunication frequency. -* -* $WIZ$ type = "int" -*/ -#define CONFIG_I2C_FREQ 100000UL - -/** - * I2C start timeout. - * For how many milliseconds the i2c_start - * should try to get an ACK before - * returning error. - * - * $WIZ$ type = "int" - */ -#define CONFIG_I2C_START_TIMEOUT 100 - -/** - * Check this to disable I2c deprecated API support. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_I2C_DISABLE_OLD_API 0 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define I2C_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define I2C_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_I2C_H */ - - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_i2s.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_i2s.h deleted file mode 100644 index 6657157e..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_i2s.h +++ /dev/null @@ -1,74 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for I2S module. - * - * - * \author Luca Ottaviano - */ - -#ifndef CFG_I2S_H -#define CFG_I2S_H - -/** - * Length of each play buffer. - * - * $WIZ$ type = "int" - */ -#define CONFIG_PLAY_BUF_LEN 8192 - -/** - * Sampling frequency of the audio file. - * - * $WIZ$ type = "int" - * $WIZ$ min = 32000 - * $WIZ$ max = 192000 - */ -#define CONFIG_SAMPLE_FREQ 44100UL - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define I2S_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define I2S_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_I2S_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ini_reader.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ini_reader.h deleted file mode 100644 index d0be4389..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ini_reader.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for ini reader module. - * - * - * \author Luca Ottaviano - */ - -#ifndef CFG_INI_READER_H -#define CFG_INI_READER_H - -/** - * Maximum ini file line length (chars). - * $WIZ$ type = "int"; min = 1 - */ -#define CONFIG_INI_MAX_LINE_LEN 64 - -#endif /* CFG_INI_READER_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_kbd.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_kbd.h deleted file mode 100644 index 92aa272d..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_kbd.h +++ /dev/null @@ -1,58 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for keyboard module. - * - * - * \author Daniele Basile - */ - -#ifndef CFG_KBD_H -#define CFG_KBD_H - -/// Keyboard polling method. $WIZ$ supports = "False" -#define CONFIG_KBD_POLL KBD_POLL_SOFTINT - -/// Enable keyboard event delivery to observers. $WIZ$ type = "boolean" -#define CONFIG_KBD_OBSERVER 0 - -/// Enable key beeps. $WIZ$ type = "boolean" -#define CONFIG_KBD_BEEP 0 - -/// Enable long pression handler for keys. $WIZ$ type = "boolean" -#define CONFIG_KBD_LONGPRESS 0 - -/// Enable calling poor man's scheduler to be called inside kbd_peek. $WIZ$ type = "boolean" -#define CONFIG_KBD_SCHED 0 - -#endif /* CFG_KBD_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_keytag.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_keytag.h deleted file mode 100644 index 8bedadf6..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_keytag.h +++ /dev/null @@ -1,61 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for keytag module. - * - * \author Daniele Basile - */ - -#ifndef CFG_KEYTAG_H -#define CFG_KEYTAG_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define CONFIG_KEYTAG_LOG_LEVEL LOG_LVL_ERR -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define CONFIG_KEYTAG_LOG_FORMAT LOG_FMT_TERSE - -/** - * Max buffer lenght - * $WIZ$ type = "int" - */ -#define CONFIG_TAG_MAX_LEN 14U - -#endif /* CFG_KEYTAG_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_kfile.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_kfile.h deleted file mode 100644 index 0ebed7b1..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_kfile.h +++ /dev/null @@ -1,61 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for KFile interface module. - * - * \author Daniele Basile - */ - -#ifndef CFG_KFILE_H -#define CFG_KFILE_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KFILE_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KFILE_LOG_FORMAT LOG_FMT_TERSE - -/** - * Enable the gets function with echo. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KFILE_GETS 0 - -#endif /* CFG_KFILE_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lcd_32122a.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lcd_32122a.h deleted file mode 100644 index 5a9b3ca7..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lcd_32122a.h +++ /dev/null @@ -1,63 +0,0 @@ -/** - * \file - * - * - * \brief Displaytech 32122A LCD driver configuration file. - * - * \author Bernie Innocenti - * \author Stefano Fedrigo - * - */ -#ifndef CFG_LCD_32122A_H -#define CFG_LCD_32122A_H - -/** - * Enable soft interrupt to refresh the LCD. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_SOFTINT_REFRESH 0 - -/** - * Enable wait macro when display is busy. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_WAIT 0 - -/** - * Display refresh time 32122a. - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_LCD_REFRESH 100 - -#endif /* CFG_LCD_32122A_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lcd_hd44.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lcd_hd44.h deleted file mode 100644 index 7bea4376..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lcd_hd44.h +++ /dev/null @@ -1,69 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for lcd display module. - * - * \author Daniele Basile - */ - -#ifndef CFG_LCD_H -#define CFG_LCD_H - -/** - * Use 4 bit addressing mode. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_4BIT 0 - -/** - * Use a table to speed up LCD memory addressing. - * This will use about 100 bytes of RAM. - * $WIZ$ type = "boolean" - */ -#define CONFIG_LCD_ADDRESS_FAST 1 - -/** - * Number of columns in LCD display. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "lcd_hd44_cols" - */ -#define CONFIG_LCD_COLS LCD_HD44_COLS_16 - -/** - * Number of rows in LCD display. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "lcd_hd44_rows" - */ -#define CONFIG_LCD_ROWS LCD_HD44_ROWS_2 - -#endif /* CFG_LCD_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lm75.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lm75.h deleted file mode 100644 index 91b347ad..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lm75.h +++ /dev/null @@ -1,57 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the LM75 sensor temperature. - * - * \author Daniele Basile - */ - -#ifndef CFG_LM75_H -#define CFG_LM75_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define LM75_LOG_LEVEL LOG_LVL_WARN - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define LM75_LOG_FORMAT LOG_FMT_TERSE - -#endif /* CFG_AX25_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lwip.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lwip.h deleted file mode 100644 index 232afef5..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_lwip.h +++ /dev/null @@ -1,1848 +0,0 @@ -/** - * \file - * - * - * \author Andrea Righi - * - * \brief Configuration file for the lwIP TCP/IP stack module - */ - -/* - * Copyright (c) 2001-2004 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - * - * This file is part of the lwIP TCP/IP stack. - * - * Author: Adam Dunkels - * - */ -#ifndef CFG_LWIP_H -#define CFG_LWIP_H - -/* - ----------------------------------------------- - ---------- Platform specific locking ---------- - ----------------------------------------------- -*/ - -/** - * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain - * critical regions during buffer allocation, deallocation and memory - * allocation and deallocation. - */ -#ifndef SYS_LIGHTWEIGHT_PROT -#define SYS_LIGHTWEIGHT_PROT 1 -#endif - -/** - * NO_SYS==1: Provides VERY minimal functionality. Otherwise, - * use lwIP facilities. - */ -#ifndef NO_SYS -#define NO_SYS 0 -#endif - -/** - * MEMCPY: override this if you have a faster implementation at hand than the - * one included in your C library - */ -#ifndef MEMCPY -#define MEMCPY(dst,src,len) memcpy(dst,src,len) -#endif - -/** - * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a - * call to memcpy() if the length is known at compile time and is small. - */ -#ifndef SMEMCPY -#define SMEMCPY(dst,src,len) memcpy(dst,src,len) -#endif - -/* - ------------------------------------ - ---------- Memory options ---------- - ------------------------------------ -*/ -/** - * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library - * instead of the lwip internal allocator. Can save code size if you - * already use it. - */ -#ifndef MEM_LIBC_MALLOC -#define MEM_LIBC_MALLOC 0 -#endif - -/** - * Use mem_malloc/mem_free instead of the lwip pool allocator. - * - * $WIZ$ type = "boolean" - */ -#ifndef MEMP_MEM_MALLOC -#define MEMP_MEM_MALLOC 0 -#endif - -/** - * MEM_ALIGNMENT: should be set to the alignment of the CPU - * 4 byte alignment -> #define MEM_ALIGNMENT 4 - * 2 byte alignment -> #define MEM_ALIGNMENT 2 - */ -#ifndef MEM_ALIGNMENT -#define MEM_ALIGNMENT 4 -#endif - -/** - * The size of the lwIP heap memory. - * - * If the application will send a lot of data that needs to be copied, this - * should be set high. - * - * $WIZ$ type = "int"; min = 1600 - */ -#define MEM_SIZE 1600 - -/** - * Dynamic pool memory overflow protection check level. - * - * MEMP_OVERFLOW_CHECK == 0 no checking - * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed - * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time - * memp_malloc() or memp_free() is called (useful but slow!) - * - * $WIZ$ type = "int"; min = "0"; max = "2" - */ -#define MEMP_OVERFLOW_CHECK 0 - -/** - * Run a sanity check after each memp_free(). - * - * $WIZ$ type = "boolean" - */ -#define MEMP_SANITY_CHECK 0 - -/** - * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set - * of memory pools of various sizes. When mem_malloc is called, an element of - * the smallest pool that can provide the length needed is returned. - * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled. - */ -#ifndef MEM_USE_POOLS -#define MEM_USE_POOLS 0 -#endif - -/** - * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next - * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more - * reliable. */ -#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL -#define MEM_USE_POOLS_TRY_BIGGER_POOL 0 -#endif - -/** - * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h - * that defines additional pools beyond the "standard" ones required - * by lwIP. If you set this to 1, you must have lwippools.h in your - * inlude path somewhere. - */ -#ifndef MEMP_USE_CUSTOM_POOLS -#define MEMP_USE_CUSTOM_POOLS 0 -#endif - -/** - * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from - * interrupt context (or another context that doesn't allow waiting for a - * semaphore). - * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT, - * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs - * with each loop so that mem_free can run. - * - * ATTENTION: As you can see from the above description, this leads to dis-/ - * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc - * can need longer. - * - * If you don't want that, at least for NO_SYS=0, you can still use the following - * functions to enqueue a deallocation call which then runs in the tcpip_thread - * context: - * - pbuf_free_callback(p); - * - mem_free_callback(m); - */ -#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT -#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0 -#endif - -/* - ------------------------------------------------ - ---------- Internal Memory Pool Sizes ---------- - ------------------------------------------------ -*/ -/** - * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). - * If the application sends a lot of data out of ROM (or other static memory), - * this should be set high. - */ -#ifndef MEMP_NUM_PBUF -#define MEMP_NUM_PBUF 16 -#endif - -/** - * MEMP_NUM_RAW_PCB: Number of raw connection PCBs - * (requires the LWIP_RAW option) - */ -#ifndef MEMP_NUM_RAW_PCB -#define MEMP_NUM_RAW_PCB 4 -#endif - -/** - * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One - * per active UDP "connection". - * (requires the LWIP_UDP option) - */ -#ifndef MEMP_NUM_UDP_PCB -#define MEMP_NUM_UDP_PCB 4 -#endif - -/** - * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_PCB -#define MEMP_NUM_TCP_PCB 5 -#endif - -/** - * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_PCB_LISTEN -#define MEMP_NUM_TCP_PCB_LISTEN 8 -#endif - -/** - * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_SEG -#define MEMP_NUM_TCP_SEG 16 -#endif - -/** - * MEMP_NUM_REASSDATA: the number of simultaneously IP packets queued for - * reassembly (whole packets, not fragments!) - */ -#ifndef MEMP_NUM_REASSDATA -#define MEMP_NUM_REASSDATA 5 -#endif - -/** - * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing - * packets (pbufs) that are waiting for an ARP request (to resolve - * their destination address) to finish. - * (requires the ARP_QUEUEING option) - */ -#ifndef MEMP_NUM_ARP_QUEUE -#define MEMP_NUM_ARP_QUEUE 30 -#endif - -/** - * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces - * can be members et the same time (one per netif - allsystems group -, plus one - * per netif membership). - * (requires the LWIP_IGMP option) - */ -#ifndef MEMP_NUM_IGMP_GROUP -#define MEMP_NUM_IGMP_GROUP 8 -#endif - -/** - * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. - * (requires NO_SYS==0) - */ -#ifndef MEMP_NUM_SYS_TIMEOUT -#define MEMP_NUM_SYS_TIMEOUT 8 -#endif - -/** - * MEMP_NUM_NETBUF: the number of struct netbufs. - * (only needed if you use the sequential API, like api_lib.c) - */ -#ifndef MEMP_NUM_NETBUF -#define MEMP_NUM_NETBUF 2 -#endif - -/** - * MEMP_NUM_NETCONN: the number of struct netconns. - * (only needed if you use the sequential API, like api_lib.c) - */ -#ifndef MEMP_NUM_NETCONN -#define MEMP_NUM_NETCONN 4 -#endif - -/** - * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used - * for callback/timeout API communication. - * (only needed if you use tcpip.c) - */ -#ifndef MEMP_NUM_TCPIP_MSG_API -#define MEMP_NUM_TCPIP_MSG_API 8 -#endif - -/** - * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used - * for incoming packets. - * (only needed if you use tcpip.c) - */ -#ifndef MEMP_NUM_TCPIP_MSG_INPKT -#define MEMP_NUM_TCPIP_MSG_INPKT 8 -#endif - -/** - * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. - */ -#ifndef PBUF_POOL_SIZE -#define PBUF_POOL_SIZE 16 -#endif - -/* - --------------------------------- - ---------- ARP options ---------- - --------------------------------- -*/ -/** - * Enable ARP functionality. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_ARP 1 - -/** - * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached. - */ -#ifndef ARP_TABLE_SIZE -#define ARP_TABLE_SIZE 10 -#endif - -/** - * ARP_QUEUEING==1: Outgoing packets are queued during hardware address - * resolution. - */ -#ifndef ARP_QUEUEING -#define ARP_QUEUEING 1 -#endif - -/** - * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be - * updated with the source MAC and IP addresses supplied in the packet. - * You may want to disable this if you do not trust LAN peers to have the - * correct addresses, or as a limited approach to attempt to handle - * spoofing. If disabled, lwIP will need to make a new ARP request if - * the peer is not already in the ARP table, adding a little latency. - */ -#ifndef ETHARP_TRUST_IP_MAC -#define ETHARP_TRUST_IP_MAC 1 -#endif - -/** - * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header. - * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check. - * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted. - * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted. - */ -#ifndef ETHARP_SUPPORT_VLAN -#define ETHARP_SUPPORT_VLAN 0 -#endif - -/* - -------------------------------- - ---------- IP options ---------- - -------------------------------- -*/ -/** - * IP_FORWARD==1: Enables the ability to forward IP packets across network - * interfaces. If you are going to run lwIP on a device with only one network - * interface, define this to 0. - */ -#ifndef IP_FORWARD -#define IP_FORWARD 0 -#endif - -/** - * IP_OPTIONS_ALLOWED: Defines the behavior for IP options. - * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped. - * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed). - */ -#ifndef IP_OPTIONS_ALLOWED -#define IP_OPTIONS_ALLOWED 1 -#endif - -/** - * Reassemble incoming fragmented IP packets. - * - * $WIZ$ type = "boolean" - */ -#define IP_REASSEMBLY 0 - -/** - * Fragment outgoing IP packets if their size exceeds MTU. - * - * $WIZ$ type = "boolean" - */ -#define IP_FRAG 0 - -/** - * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) - * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived - * in this time, the whole packet is discarded. - */ -#ifndef IP_REASS_MAXAGE -#define IP_REASS_MAXAGE 3 -#endif - -/** - * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. - * Since the received pbufs are enqueued, be sure to configure - * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive - * packets even if the maximum amount of fragments is enqueued for reassembly! - */ -#ifndef IP_REASS_MAX_PBUFS -#define IP_REASS_MAX_PBUFS 10 -#endif - -/** - * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP - * fragmentation. Otherwise pbufs are allocated and reference the original - * packet data to be fragmented. - */ -#ifndef IP_FRAG_USES_STATIC_BUF -#define IP_FRAG_USES_STATIC_BUF 1 -#endif - -/** - * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer - * (requires IP_FRAG_USES_STATIC_BUF==1) - */ -#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU) -#define IP_FRAG_MAX_MTU 1500 -#endif - -/** - * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. - */ -#ifndef IP_DEFAULT_TTL -#define IP_DEFAULT_TTL 255 -#endif - -/** - * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast - * filter per pcb on udp and raw send operations. To enable broadcast filter - * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1. - */ -#ifndef IP_SOF_BROADCAST -#define IP_SOF_BROADCAST 0 -#endif - -/** - * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast - * filter on recv operations. - */ -#ifndef IP_SOF_BROADCAST_RECV -#define IP_SOF_BROADCAST_RECV 0 -#endif - -/* - ---------------------------------- - ---------- ICMP options ---------- - ---------------------------------- -*/ -/** - * Enable ICMP module inside the IP stack. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_ICMP 1 - -/** - * ICMP_TTL: Default value for Time-To-Live used by ICMP packets. - */ -#ifndef ICMP_TTL -#define ICMP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only) - */ -#ifndef LWIP_BROADCAST_PING -#define LWIP_BROADCAST_PING 0 -#endif - -/** - * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only) - */ -#ifndef LWIP_MULTICAST_PING -#define LWIP_MULTICAST_PING 0 -#endif - -/* - --------------------------------- - ---------- RAW options ---------- - --------------------------------- -*/ -/** - * Enable application layer to hook into the IP layer itself. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_RAW 0 - -/** - * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. - */ -#ifndef RAW_TTL -#define RAW_TTL (IP_DEFAULT_TTL) -#endif - -/* - ---------------------------------- - ---------- DHCP options ---------- - ---------------------------------- -*/ -/** - * Enable DHCP module. UDP must be also available. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_DHCP 1 - -/** - * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address. - */ -#ifndef DHCP_DOES_ARP_CHECK -#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP)) -#endif - -/* - ------------------------------------ - ---------- AUTOIP options ---------- - ------------------------------------ -*/ -/** - * LWIP_AUTOIP==1: Enable AUTOIP module. - */ -#ifndef LWIP_AUTOIP -#define LWIP_AUTOIP 0 -#endif - -/** - * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on - * the same interface at the same time. - */ -#ifndef LWIP_DHCP_AUTOIP_COOP -#define LWIP_DHCP_AUTOIP_COOP 0 -#endif - -/** - * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes - * that should be sent before falling back on AUTOIP. This can be set - * as low as 1 to get an AutoIP address very quickly, but you should - * be prepared to handle a changing IP address when DHCP overrides - * AutoIP. - */ -#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES -#define LWIP_DHCP_AUTOIP_COOP_TRIES 9 -#endif - -/* - ---------------------------------- - ---------- SNMP options ---------- - ---------------------------------- -*/ -/** - * Turn on SNMP module. UDP must be also available. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_SNMP 0 - -/** - * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will - * allow. At least one request buffer is required. - */ -#ifndef SNMP_CONCURRENT_REQUESTS -#define SNMP_CONCURRENT_REQUESTS 1 -#endif - -/** - * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap - * destination is required - */ -#ifndef SNMP_TRAP_DESTINATIONS -#define SNMP_TRAP_DESTINATIONS 1 -#endif - -/** - * SNMP_PRIVATE_MIB: - */ -#ifndef SNMP_PRIVATE_MIB -#define SNMP_PRIVATE_MIB 0 -#endif - -/** - * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not - * a safe action and disabled when SNMP_SAFE_REQUESTS = 1). - * Unsafe requests are disabled by default! - */ -#ifndef SNMP_SAFE_REQUESTS -#define SNMP_SAFE_REQUESTS 1 -#endif - -/* - ---------------------------------- - ---------- IGMP options ---------- - ---------------------------------- -*/ -/** - * Turn on IGMP module. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_IGMP 0 - -/* - ---------------------------------- - ---------- DNS options ----------- - ---------------------------------- -*/ -/** - * Turn on DNS module. UDP must be available for DNS transport. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_DNS 0 - -/** DNS maximum number of entries to maintain locally. */ -#ifndef DNS_TABLE_SIZE -#define DNS_TABLE_SIZE 4 -#endif - -/** DNS maximum host name length supported in the name table. */ -#ifndef DNS_MAX_NAME_LENGTH -#define DNS_MAX_NAME_LENGTH 256 -#endif - -/** The maximum of DNS servers */ -#ifndef DNS_MAX_SERVERS -#define DNS_MAX_SERVERS 2 -#endif - -/** DNS do a name checking between the query and the response. */ -#ifndef DNS_DOES_NAME_CHECK -#define DNS_DOES_NAME_CHECK 1 -#endif - -/** DNS use a local buffer if DNS_USES_STATIC_BUF=0, a static one if - DNS_USES_STATIC_BUF=1, or a dynamic one if DNS_USES_STATIC_BUF=2. - The buffer will be of size DNS_MSG_SIZE */ -#ifndef DNS_USES_STATIC_BUF -#define DNS_USES_STATIC_BUF 1 -#endif - -/** DNS message max. size. Default value is RFC compliant. */ -#ifndef DNS_MSG_SIZE -#define DNS_MSG_SIZE 512 -#endif - -/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled, - * you have to define - * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}} - * (an array of structs name/address, where address is an u32_t in network - * byte order). - * - * Instead, you can also use an external function: - * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name) - * that returns the IP address or INADDR_NONE if not found. - */ -#ifndef DNS_LOCAL_HOSTLIST -#define DNS_LOCAL_HOSTLIST 0 -#endif /* DNS_LOCAL_HOSTLIST */ - -/** If this is turned on, the local host-list can be dynamically changed - * at runtime. */ -#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC -#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0 -#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */ - -/* - --------------------------------- - ---------- UDP options ---------- - --------------------------------- -*/ -/** - * Turn on UDP. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_UDP 1 - -/** - * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP) - */ -#ifndef LWIP_UDPLITE -#define LWIP_UDPLITE 0 -#endif - -/** - * UDP_TTL: Default Time-To-Live value. - */ -#ifndef UDP_TTL -#define UDP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf. - */ -#ifndef LWIP_NETBUF_RECVINFO -#define LWIP_NETBUF_RECVINFO 0 -#endif - -/* - --------------------------------- - ---------- TCP options ---------- - --------------------------------- -*/ -/** - * Turn on TCP. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_TCP 1 - -/** - * TCP_TTL: Default Time-To-Live value. - */ -#ifndef TCP_TTL -#define TCP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * TCP_WND: The size of a TCP window. This must be at least - * (2 * TCP_MSS) for things to work well - */ -#ifndef TCP_WND -#define TCP_WND (4 * TCP_MSS) -#endif - -/** - * TCP_MAXRTX: Maximum number of retransmissions of data segments. - */ -#ifndef TCP_MAXRTX -#define TCP_MAXRTX 12 -#endif - -/** - * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments. - */ -#ifndef TCP_SYNMAXRTX -#define TCP_SYNMAXRTX 6 -#endif - -/** - * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order. - * Define to 0 if your device is low on memory. - */ -#ifndef TCP_QUEUE_OOSEQ -#define TCP_QUEUE_OOSEQ (LWIP_TCP) -#endif - -/** - * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default, - * you might want to increase this.) - * For the receive side, this MSS is advertised to the remote side - * when opening a connection. For the transmit size, this MSS sets - * an upper limit on the MSS advertised by the remote host. - */ -#ifndef TCP_MSS -#define TCP_MSS 536 -#endif - -/** - * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really - * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which - * reflects the available reassembly buffer size at the remote host) and the - * largest size permitted by the IP layer" (RFC 1122) - * Setting this to 1 enables code that checks TCP_MSS against the MTU of the - * netif used for a connection and limits the MSS if it would be too big otherwise. - */ -#ifndef TCP_CALCULATE_EFF_SEND_MSS -#define TCP_CALCULATE_EFF_SEND_MSS 1 -#endif - - -/** - * TCP_SND_BUF: TCP sender buffer space (bytes). - */ -#ifndef TCP_SND_BUF -#define TCP_SND_BUF (2 * TCP_MSS) -#endif - -/** - * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least - * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. - */ -#ifndef TCP_SND_QUEUELEN -#define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF)/(TCP_MSS)) -#endif - -/** - * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than or equal - * to TCP_SND_BUF. It is the amount of space which must be available in the - * TCP snd_buf for select to return writable. - */ -#ifndef TCP_SNDLOWAT -#define TCP_SNDLOWAT ((TCP_SND_BUF)/2) -#endif - -/** - * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb. - */ -#ifndef TCP_LISTEN_BACKLOG -#define TCP_LISTEN_BACKLOG 0 -#endif - -/** - * The maximum allowed backlog for TCP listen netconns. - * This backlog is used unless another is explicitly specified. - * 0xff is the maximum (u8_t). - */ -#ifndef TCP_DEFAULT_LISTEN_BACKLOG -#define TCP_DEFAULT_LISTEN_BACKLOG 0xff -#endif - -/** - * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option. - */ -#ifndef LWIP_TCP_TIMESTAMPS -#define LWIP_TCP_TIMESTAMPS 0 -#endif - -/** - * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an - * explicit window update - */ -#ifndef TCP_WND_UPDATE_THRESHOLD -#define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4) -#endif - -/* - ---------------------------------- - ---------- Pbuf options ---------- - ---------------------------------- -*/ -/** - * PBUF_LINK_HLEN: the number of bytes that should be allocated for a - * link level header. The default is 14, the standard value for - * Ethernet. - */ -#ifndef PBUF_LINK_HLEN -#define PBUF_LINK_HLEN 14 -#endif - -/** - * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is - * designed to accomodate single full size TCP frame in one pbuf, including - * TCP_MSS, IP header, and link header. - */ -#ifndef PBUF_POOL_BUFSIZE -#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) -#endif - -/* - ------------------------------------------------ - ---------- Network Interfaces options ---------- - ------------------------------------------------ -*/ -/** - * Use DHCP_OPTION_HOSTNAME with netif's hostname field. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_NETIF_HOSTNAME 1 - -/** - * Support netif api (in netifapi.c) - * - * $WIZ$ type = "boolean" - */ -#define LWIP_NETIF_API 0 - -/** - * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface - * changes its up/down status (i.e., due to DHCP IP acquistion) - */ -#ifndef LWIP_NETIF_STATUS_CALLBACK -#define LWIP_NETIF_STATUS_CALLBACK 0 -#endif - -/** - * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface - * whenever the link changes (i.e., link down) - */ -#ifndef LWIP_NETIF_LINK_CALLBACK -#define LWIP_NETIF_LINK_CALLBACK 0 -#endif - -/** - * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table - * indices) in struct netif. TCP and UDP can make use of this to prevent - * scanning the ARP table for every sent packet. While this is faster for big - * ARP tables or many concurrent connections, it might be counterproductive - * if you have a tiny ARP table or if there never are concurrent connections. - */ -#ifndef LWIP_NETIF_HWADDRHINT -#define LWIP_NETIF_HWADDRHINT 0 -#endif - -/** - * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP - * address equal to the netif IP address, looping them back up the stack. - */ -#ifndef LWIP_NETIF_LOOPBACK -#define LWIP_NETIF_LOOPBACK 0 -#endif - -/** - * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback - * sending for each netif (0 = disabled) - */ -#ifndef LWIP_LOOPBACK_MAX_PBUFS -#define LWIP_LOOPBACK_MAX_PBUFS 0 -#endif - -/** - * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in - * the system, as netifs must change how they behave depending on this setting - * for the LWIP_NETIF_LOOPBACK option to work. - * Setting this is needed to avoid reentering non-reentrant functions like - * tcp_input(). - * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a - * multithreaded environment like tcpip.c. In this case, netif->input() - * is called directly. - * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup. - * The packets are put on a list and netif_poll() must be called in - * the main application loop. - */ -#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING -#define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS) -#endif - -/** - * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data - * to be sent into one single pbuf. This is for compatibility with DMA-enabled - * MACs that do not support scatter-gather. - * Beware that this might involve CPU-memcpy before transmitting that would not - * be needed without this flag! Use this only if you need to! - * - * @todo: TCP and IP-frag do not work with this, yet: - */ -#ifndef LWIP_NETIF_TX_SINGLE_PBUF -#define LWIP_NETIF_TX_SINGLE_PBUF 0 -#endif /* LWIP_NETIF_TX_SINGLE_PBUF */ - -/* - ------------------------------------ - ---------- LOOPIF options ---------- - ------------------------------------ -*/ -/** - * Support loop interface (127.0.0.1) and loopif.c - * - * $WIZ$ type = "boolean" - */ -#define LWIP_HAVE_LOOPIF 0 - -/* - ------------------------------------ - ---------- SLIPIF options ---------- - ------------------------------------ -*/ -/** - * Support slip interface and slipif.c - * - * $WIZ$ type = "boolean" - */ -#define LWIP_HAVE_SLIPIF 0 - -/* - ------------------------------------ - ---------- Thread options ---------- - ------------------------------------ -*/ -/** - * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread. - */ -#ifndef TCPIP_THREAD_NAME -#define TCPIP_THREAD_NAME "tcpip_thread" -#endif - -/** - * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef TCPIP_THREAD_STACKSIZE -#define TCPIP_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3) -#endif - -/** - * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef TCPIP_THREAD_PRIO -#define TCPIP_THREAD_PRIO 0 -#endif - -/** - * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages - * The queue size value itself is platform-dependent, but is passed to - * sys_mbox_new() when tcpip_init is called. - */ -#ifndef TCPIP_MBOX_SIZE -#define TCPIP_MBOX_SIZE 0 -#endif - -/** - * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread. - */ -#ifndef SLIPIF_THREAD_NAME -#define SLIPIF_THREAD_NAME "slipif_loop" -#endif - -/** - * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef SLIPIF_THREAD_STACKSIZE -#define SLIPIF_THREAD_STACKSIZE 0 -#endif - -/** - * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef SLIPIF_THREAD_PRIO -#define SLIPIF_THREAD_PRIO 1 -#endif - -/** - * PPP_THREAD_NAME: The name assigned to the pppMain thread. - */ -#ifndef PPP_THREAD_NAME -#define PPP_THREAD_NAME "pppMain" -#endif - -/** - * PPP_THREAD_STACKSIZE: The stack size used by the pppMain thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef PPP_THREAD_STACKSIZE -#define PPP_THREAD_STACKSIZE 0 -#endif - -/** - * PPP_THREAD_PRIO: The priority assigned to the pppMain thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef PPP_THREAD_PRIO -#define PPP_THREAD_PRIO 1 -#endif - -/** - * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread. - */ -#ifndef DEFAULT_THREAD_NAME -#define DEFAULT_THREAD_NAME "lwIP" -#endif - -/** - * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef DEFAULT_THREAD_STACKSIZE -#define DEFAULT_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3) -#endif - -/** - * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef DEFAULT_THREAD_PRIO -#define DEFAULT_THREAD_PRIO 1 -#endif - -/** - * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_RAW_RECVMBOX_SIZE -#define DEFAULT_RAW_RECVMBOX_SIZE 0 -#endif - -/** - * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_UDP_RECVMBOX_SIZE -#define DEFAULT_UDP_RECVMBOX_SIZE 0 -#endif - -/** - * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_TCP_RECVMBOX_SIZE -#define DEFAULT_TCP_RECVMBOX_SIZE 0 -#endif - -/** - * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections. - * The queue size value itself is platform-dependent, but is passed to - * sys_mbox_new() when the acceptmbox is created. - */ -#ifndef DEFAULT_ACCEPTMBOX_SIZE -#define DEFAULT_ACCEPTMBOX_SIZE 0 -#endif - -/* - ---------------------------------------------- - ---------- Sequential layer options ---------- - ---------------------------------------------- -*/ -/** - * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!) - * Don't use it if you're not an active lwIP project member - */ -#ifndef LWIP_TCPIP_CORE_LOCKING -#define LWIP_TCPIP_CORE_LOCKING 0 -#endif - -/** - * Enable Netconn API (require to use api_lib.c) - * - * $WIZ$ type = "boolean" - */ -#define LWIP_NETCONN 1 - -/* - ------------------------------------ - ---------- Socket options ---------- - ------------------------------------ -*/ -/** - * Enable Socket API (require to use sockets.c) - * - * $WIZ$ type = "boolean" - */ -#define LWIP_SOCKET 0 - -/** - * Enable BSD-style sockets functions names. - * - * NOTE: do not change this!!! - */ -#ifndef LWIP_COMPAT_SOCKETS -#define LWIP_COMPAT_SOCKETS 0 -#endif - -/** - * Enable POSIX-style sockets functions names. - * - * $WIZ$ type = "boolean" - */ -#define LWIP_POSIX_SOCKETS_IO_NAMES 0 - -/** - * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT - * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set - * in seconds. (does not require sockets.c, and will affect tcp.c) - */ -#ifndef LWIP_TCP_KEEPALIVE -#define LWIP_TCP_KEEPALIVE 0 -#endif - -/** - * LWIP_SO_RCVTIMEO==1: Enable SO_RCVTIMEO processing. - */ -#ifndef LWIP_SO_RCVTIMEO -#define LWIP_SO_RCVTIMEO 0 -#endif - -/** - * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing. - */ -#ifndef LWIP_SO_RCVBUF -#define LWIP_SO_RCVBUF 0 -#endif - -/** - * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize. - */ -#ifndef RECV_BUFSIZE_DEFAULT -#define RECV_BUFSIZE_DEFAULT INT_MAX -#endif - -/** - * SO_REUSE==1: Enable SO_REUSEADDR and SO_REUSEPORT options. DO NOT USE! - */ -#ifndef SO_REUSE -#define SO_REUSE 0 -#endif - -/* - ---------------------------------------- - ---------- Statistics options ---------- - ---------------------------------------- -*/ -/** - * LWIP_STATS==1: Enable statistics collection in lwip_stats. - */ -#ifndef LWIP_STATS -#define LWIP_STATS 0 -#endif - -#if LWIP_STATS - -/** - * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions. - */ -#ifndef LWIP_STATS_DISPLAY -#define LWIP_STATS_DISPLAY 0 -#endif - -/** - * LINK_STATS==1: Enable link stats. - */ -#ifndef LINK_STATS -#define LINK_STATS 1 -#endif - -/** - * ETHARP_STATS==1: Enable etharp stats. - */ -#ifndef ETHARP_STATS -#define ETHARP_STATS (LWIP_ARP) -#endif - -/** - * IP_STATS==1: Enable IP stats. - */ -#ifndef IP_STATS -#define IP_STATS 1 -#endif - -/** - * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is - * on if using either frag or reass. - */ -#ifndef IPFRAG_STATS -#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG) -#endif - -/** - * ICMP_STATS==1: Enable ICMP stats. - */ -#ifndef ICMP_STATS -#define ICMP_STATS 1 -#endif - -/** - * IGMP_STATS==1: Enable IGMP stats. - */ -#ifndef IGMP_STATS -#define IGMP_STATS (LWIP_IGMP) -#endif - -/** - * UDP_STATS==1: Enable UDP stats. Default is on if - * UDP enabled, otherwise off. - */ -#ifndef UDP_STATS -#define UDP_STATS (LWIP_UDP) -#endif - -/** - * TCP_STATS==1: Enable TCP stats. Default is on if TCP - * enabled, otherwise off. - */ -#ifndef TCP_STATS -#define TCP_STATS (LWIP_TCP) -#endif - -/** - * MEM_STATS==1: Enable mem.c stats. - */ -#ifndef MEM_STATS -#define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0)) -#endif - -/** - * MEMP_STATS==1: Enable memp.c pool stats. - */ -#ifndef MEMP_STATS -#define MEMP_STATS (MEMP_MEM_MALLOC == 0) -#endif - -/** - * SYS_STATS==1: Enable system stats (sem and mbox counts, etc). - */ -#ifndef SYS_STATS -#define SYS_STATS (NO_SYS == 0) -#endif - -#else - -#define LINK_STATS 0 -#define ETHARP_STATS 0 -#define IP_STATS 0 -#define IPFRAG_STATS 0 -#define ICMP_STATS 0 -#define IGMP_STATS 0 -#define UDP_STATS 0 -#define TCP_STATS 0 -#define MEM_STATS 0 -#define MEMP_STATS 0 -#define SYS_STATS 0 -#define LWIP_STATS_DISPLAY 0 - -#endif /* LWIP_STATS */ - -/* - --------------------------------- - ---------- PPP options ---------- - --------------------------------- -*/ -/** - * Enable PPP. - * - * $WIZ$ type = "boolean" - */ -#define PPP_SUPPORT 0 - -/** - * Enable PPP Over Ethernet. - * - * $WIZ$ type = "boolean" - */ -#define PPPOE_SUPPORT 0 - -/** - * PPPOS_SUPPORT==1: Enable PPP Over Serial - */ -#ifndef PPPOS_SUPPORT -#define PPPOS_SUPPORT PPP_SUPPORT -#endif - -#if PPP_SUPPORT - -/** - * NUM_PPP: Max PPP sessions. - */ -#ifndef NUM_PPP -#define NUM_PPP 1 -#endif - -/** - * PAP_SUPPORT==1: Support PAP. - */ -#ifndef PAP_SUPPORT -#define PAP_SUPPORT 0 -#endif - -/** - * CHAP_SUPPORT==1: Support CHAP. - */ -#ifndef CHAP_SUPPORT -#define CHAP_SUPPORT 0 -#endif - -/** - * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef MSCHAP_SUPPORT -#define MSCHAP_SUPPORT 0 -#endif - -/** - * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef CBCP_SUPPORT -#define CBCP_SUPPORT 0 -#endif - -/** - * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef CCP_SUPPORT -#define CCP_SUPPORT 0 -#endif - -/** - * VJ_SUPPORT==1: Support VJ header compression. - */ -#ifndef VJ_SUPPORT -#define VJ_SUPPORT 0 -#endif - -/** - * MD5_SUPPORT==1: Support MD5 (see also CHAP). - */ -#ifndef MD5_SUPPORT -#define MD5_SUPPORT 0 -#endif - -/* - * Timeouts - */ -#ifndef FSM_DEFTIMEOUT -#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */ -#endif - -#ifndef FSM_DEFMAXTERMREQS -#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */ -#endif - -#ifndef FSM_DEFMAXCONFREQS -#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */ -#endif - -#ifndef FSM_DEFMAXNAKLOOPS -#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */ -#endif - -#ifndef UPAP_DEFTIMEOUT -#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */ -#endif - -#ifndef UPAP_DEFREQTIME -#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */ -#endif - -#ifndef CHAP_DEFTIMEOUT -#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */ -#endif - -#ifndef CHAP_DEFTRANSMITS -#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */ -#endif - -/* Interval in seconds between keepalive echo requests, 0 to disable. */ -#ifndef LCP_ECHOINTERVAL -#define LCP_ECHOINTERVAL 0 -#endif - -/* Number of unanswered echo requests before failure. */ -#ifndef LCP_MAXECHOFAILS -#define LCP_MAXECHOFAILS 3 -#endif - -/* Max Xmit idle time (in jiffies) before resend flag char. */ -#ifndef PPP_MAXIDLEFLAG -#define PPP_MAXIDLEFLAG 100 -#endif - -/* - * Packet sizes - * - * Note - lcp shouldn't be allowed to negotiate stuff outside these - * limits. See lcp.h in the pppd directory. - * (XXX - these constants should simply be shared by lcp.c instead - * of living in lcp.h) - */ -#define PPP_MTU 1500 /* Default MTU (size of Info field) */ -#ifndef PPP_MAXMTU -/* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */ -#define PPP_MAXMTU 1500 /* Largest MTU we allow */ -#endif -#define PPP_MINMTU 64 -#define PPP_MRU 1500 /* default MRU = max length of info field */ -#define PPP_MAXMRU 1500 /* Largest MRU we allow */ -#ifndef PPP_DEFMRU -#define PPP_DEFMRU 296 /* Try for this */ -#endif -#define PPP_MINMRU 128 /* No MRUs below this */ - -#ifndef MAXNAMELEN -#define MAXNAMELEN 256 /* max length of hostname or name for auth */ -#endif -#ifndef MAXSECRETLEN -#define MAXSECRETLEN 256 /* max length of password or secret */ -#endif - -#endif /* PPP_SUPPORT */ - -/* - -------------------------------------- - ---------- Checksum options ---------- - -------------------------------------- -*/ -/** - * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets. - */ -#ifndef CHECKSUM_GEN_IP -#define CHECKSUM_GEN_IP 1 -#endif - -/** - * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets. - */ -#ifndef CHECKSUM_GEN_UDP -#define CHECKSUM_GEN_UDP 1 -#endif - -/** - * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets. - */ -#ifndef CHECKSUM_GEN_TCP -#define CHECKSUM_GEN_TCP 1 -#endif - -/** - * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets. - */ -#ifndef CHECKSUM_CHECK_IP -#define CHECKSUM_CHECK_IP 1 -#endif - -/** - * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets. - */ -#ifndef CHECKSUM_CHECK_UDP -#define CHECKSUM_CHECK_UDP 1 -#endif - -/** - * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets. - */ -#ifndef CHECKSUM_CHECK_TCP -#define CHECKSUM_CHECK_TCP 1 -#endif - -/* - --------------------------------------- - ---------- Debugging options ---------- - --------------------------------------- -*/ - -#ifdef _DEBUG -#define LWIP_DEBUG -#endif - -/** - * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is - * compared against this value. If it is smaller, then debugging - * messages are written. - */ -#ifndef LWIP_DBG_MIN_LEVEL -#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL -#endif - -/** - * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable - * debug messages of certain types. - */ -#ifndef LWIP_DBG_TYPES_ON -#define LWIP_DBG_TYPES_ON LWIP_DBG_ON -#endif - -/** - * ETHARP_DEBUG: Enable debugging in etharp.c. - */ -#ifndef ETHARP_DEBUG -#define ETHARP_DEBUG LWIP_DBG_OFF -#endif - -/** - * NETIF_DEBUG: Enable debugging in netif.c. - */ -#ifndef NETIF_DEBUG -#define NETIF_DEBUG LWIP_DBG_OFF -#endif - -/** - * PBUF_DEBUG: Enable debugging in pbuf.c. - */ -#ifndef PBUF_DEBUG -#define PBUF_DEBUG LWIP_DBG_OFF -#endif - -/** - * API_LIB_DEBUG: Enable debugging in api_lib.c. - */ -#ifndef API_LIB_DEBUG -#define API_LIB_DEBUG LWIP_DBG_OFF -#endif - -/** - * API_MSG_DEBUG: Enable debugging in api_msg.c. - */ -#ifndef API_MSG_DEBUG -#define API_MSG_DEBUG LWIP_DBG_OFF -#endif - -/** - * SOCKETS_DEBUG: Enable debugging in sockets.c. - */ -#ifndef SOCKETS_DEBUG -#define SOCKETS_DEBUG LWIP_DBG_OFF -#endif - -/** - * ICMP_DEBUG: Enable debugging in icmp.c. - */ -#ifndef ICMP_DEBUG -#define ICMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * IGMP_DEBUG: Enable debugging in igmp.c. - */ -#ifndef IGMP_DEBUG -#define IGMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * INET_DEBUG: Enable debugging in inet.c. - */ -#ifndef INET_DEBUG -#define INET_DEBUG LWIP_DBG_OFF -#endif - -/** - * IP_DEBUG: Enable debugging for IP. - */ -#ifndef IP_DEBUG -#define IP_DEBUG LWIP_DBG_OFF -#endif - -/** - * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass. - */ -#ifndef IP_REASS_DEBUG -#define IP_REASS_DEBUG LWIP_DBG_OFF -#endif - -/** - * RAW_DEBUG: Enable debugging in raw.c. - */ -#ifndef RAW_DEBUG -#define RAW_DEBUG LWIP_DBG_OFF -#endif - -/** - * MEM_DEBUG: Enable debugging in mem.c. - */ -#ifndef MEM_DEBUG -#define MEM_DEBUG LWIP_DBG_OFF -#endif - -/** - * MEMP_DEBUG: Enable debugging in memp.c. - */ -#ifndef MEMP_DEBUG -#define MEMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SYS_DEBUG: Enable debugging in sys.c. - */ -#ifndef SYS_DEBUG -#define SYS_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_DEBUG: Enable debugging for TCP. - */ -#ifndef TCP_DEBUG -#define TCP_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug. - */ -#ifndef TCP_INPUT_DEBUG -#define TCP_INPUT_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit. - */ -#ifndef TCP_FR_DEBUG -#define TCP_FR_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit - * timeout. - */ -#ifndef TCP_RTO_DEBUG -#define TCP_RTO_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_CWND_DEBUG: Enable debugging for TCP congestion window. - */ -#ifndef TCP_CWND_DEBUG -#define TCP_CWND_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating. - */ -#ifndef TCP_WND_DEBUG -#define TCP_WND_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions. - */ -#ifndef TCP_OUTPUT_DEBUG -#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_RST_DEBUG: Enable debugging for TCP with the RST message. - */ -#ifndef TCP_RST_DEBUG -#define TCP_RST_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths. - */ -#ifndef TCP_QLEN_DEBUG -#define TCP_QLEN_DEBUG LWIP_DBG_OFF -#endif - -/** - * UDP_DEBUG: Enable debugging in UDP. - */ -#ifndef UDP_DEBUG -#define UDP_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCPIP_DEBUG: Enable debugging in tcpip.c. - */ -#ifndef TCPIP_DEBUG -#define TCPIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * PPP_DEBUG: Enable debugging for PPP. - */ -#ifndef PPP_DEBUG -#define PPP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SLIP_DEBUG: Enable debugging in slipif.c. - */ -#ifndef SLIP_DEBUG -#define SLIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * DHCP_DEBUG: Enable debugging in dhcp.c. - */ -#ifndef DHCP_DEBUG -#define DHCP_DEBUG LWIP_DBG_OFF -#endif - -/** - * AUTOIP_DEBUG: Enable debugging in autoip.c. - */ -#ifndef AUTOIP_DEBUG -#define AUTOIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SNMP_MSG_DEBUG: Enable debugging for SNMP messages. - */ -#ifndef SNMP_MSG_DEBUG -#define SNMP_MSG_DEBUG LWIP_DBG_OFF -#endif - -/** - * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs. - */ -#ifndef SNMP_MIB_DEBUG -#define SNMP_MIB_DEBUG LWIP_DBG_OFF -#endif - -/** - * DNS_DEBUG: Enable debugging for DNS. - */ -#ifndef DNS_DEBUG -#define DNS_DEBUG LWIP_DBG_OFF -#endif - -/* Custom definitions: !!!DO NOT CHANGE THIS SECTION!!! */ -#define LWIP_TIMEVAL_PRIVATE 0 - -#endif /* CFG_LWIP_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_md2.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_md2.h deleted file mode 100644 index e937b900..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_md2.h +++ /dev/null @@ -1,53 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for MD2 module. - * - * - * \author Daniele Basile - */ - -#ifndef CFG_MD2_H -#define CFG_MD2_H - -/** - * Size of block for MD2 algorithm. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_MD2_BLOCK_LEN 16 - -/// Use standard permutation in MD2 algorithm. $WIZ$ type = "boolean" -#define CONFIG_MD2_STD_PERM 0 - -#endif /* CFG_MD2_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_monitor.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_monitor.h deleted file mode 100644 index d0e24da4..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_monitor.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * \file - * - * - * \brief Kernel monitor configuration parameters - * - * \author Bernie Innocenti - */ - -#ifndef CFG_MONITOR_H -#define CFG_MONITOR_H - -/** - * Process monitor. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_MONITOR 1 - -#endif /* CFG_MONITOR_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_nmea.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_nmea.h deleted file mode 100644 index 9249a9af..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_nmea.h +++ /dev/null @@ -1,85 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for NMEA module. - * - * \author Daniele Basile - */ - -#ifndef CFG_NMEA_H -#define CFG_NMEA_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define NMEA_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define NMEA_LOG_FORMAT LOG_FMT_TERSE - - -/** - * Maximum number of sentence parsers supported. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NMEAP_MAX_SENTENCES 8 - -/** - * Max length of a complete sentence. The standard says 82 bytes, but its probably - * better to go at least 128 since some units don't adhere to the 82 bytes - * especially for proprietary sentences. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NMEAP_MAX_SENTENCE_LENGTH 255 - -/** - * Max tokens in one sentence. 24 is enough for any standard sentence. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NMEAP_MAX_TOKENS 24 - -#endif /* CFG_NMEA_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_parser.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_parser.h deleted file mode 100644 index 572b4a24..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_parser.h +++ /dev/null @@ -1,46 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for parser module. - * - * \author Daniele Basile - */ - -#ifndef CFG_PARSER_H -#define CFG_PARSER_H - - - -#endif /* CFG_PARSER_H */ - - - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_phase.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_phase.h deleted file mode 100644 index 1ed51076..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_phase.h +++ /dev/null @@ -1,55 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for phase module. - * - * \author Daniele Basile - */ - -#ifndef CFG_PHASE_H -#define CFG_PHASE_H - -/** - * Max value of the duty cycle on triac. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_TRIAC_MAX_DUTY 100 - -/** - * Max value of the triac power. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_TRIAC_MAX_POWER 100 - -#endif /* CFG_PHASE_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_pocketbus.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_pocketbus.h deleted file mode 100644 index aa0b090b..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_pocketbus.h +++ /dev/null @@ -1,71 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for pocketbus module. - * - * \author Daniele Basile - */ - -#ifndef CFG_POCKETBUS_H -#define CFG_POCKETBUS_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define POCKETBUS_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define POCKETBUS_LOG_FORMAT LOG_FMT_TERSE - - -/** - *Buffer len for pockebus protocol. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_POCKETBUS_BUFLEN 128 - -/** - * Command replay timeout in milliseconds. - * $WIZ$ type = "int" - */ -#define CONFIG_POCKETBUS_CMD_REPLY_TIMEOUT 50 - -#endif /* CFG_POCKETBUS_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_proc.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_proc.h deleted file mode 100644 index 4c55c795..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_proc.h +++ /dev/null @@ -1,107 +0,0 @@ -/** - * \file - * - * - * \brief Kernel configuration parameters - * - * \author Bernie Innocenti - */ - -#ifndef CFG_PROC_H -#define CFG_PROC_H - -/** - * Enable the multithreading kernel. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN 1 - -/** - * Kernel interrupt supervisor. WARNING: Experimental, still incomplete! - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_KERN_IRQ 0 - -/** - * Preemptive process scheduling. - * - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "timer" - */ -#define CONFIG_KERN_PREEMPT 0 - -/** - * Time sharing quantum (a prime number prevents interference effects) [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_KERN_QUANTUM 11 - -/** - * Priority-based scheduling policy. - * $WIZ$ type = "boolean" - */ -#define CONFIG_KERN_PRI 1 - -/** - * Dynamic memory allocation for processes. - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "heap" - */ -#define CONFIG_KERN_HEAP 1 - -/** - * Size of the dynamic memory pool used by processes. - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_KERN_HEAP_SIZE 4096L - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define KERN_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define KERN_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PROC_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_pwm.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_pwm.h deleted file mode 100644 index 595189e6..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_pwm.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for PWM module. - * - * \author Daniele Basile - */ - -#ifndef CFG_PWM_H -#define CFG_PWM_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define PWM_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define PWM_LOG_FORMAT LOG_FMT_VERBOSE - -#endif /* CFG_PWM_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ramp.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ramp.h deleted file mode 100644 index 162d2db2..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ramp.h +++ /dev/null @@ -1,115 +0,0 @@ - /** - * \file - * - * - * \brief Configuration file Ramp algorithm module. - * - * \author Daniele Basile - */ - -#ifndef CFG_RAMP_H -#define CFG_RAMP_H - -/** - * Define whether the ramp will use floating point calculation within ramp_evaluate(). - * Otherwise, a less precise fixed point version will be used, which is faster on - * platforms which do no support floating point operations. - * - * \note Floating point operations will be always done within ramp_compute() to - * precalculate values, so there has to be at least a floating point emulation support. - * - * $WIZ$ type = "boolean" - */ -#define RAMP_USE_FLOATING_POINT 0 - - -#if !RAMP_USE_FLOATING_POINT - - /** - * Number of least-significant bits which are stripped away during ramp evaluation. - * This setting allows to specify larger ramps at the price of less precision. - * - * The maximum ramp size allowed is 2^(24 + RAMP_CLOCK_SHIFT_PRECISION), in clocks. - * For instance, using RAMP_CLOCK_SHIFT_PRECISION 1, and a 8x prescaler, the maximum - * length of a ramp is about 6.7 secs. Raising RAMP_CLOCK_SHIFT_PRECISION to 2 - * brings the maximum length to 13.4 secs, at the price of less precision. - * - * ramp_compute() will check that the length is below the maximum allowed through - * a runtime assertion. - * - * \note This macro is used only for the fixed-point version of the ramp. - * $WIZ$ type = "int" - * $WIZ$ min = 0 - * $WIZ$ max = 32 - */ - #define RAMP_CLOCK_SHIFT_PRECISION 2 -#endif - - -/** -* Negative pulse width for ramp. -* $WIZ$ type = "int" -* $WIZ$ min = 1 -*/ -#define RAMP_PULSE_WIDTH 50 - -/** - * Default ramp time (microsecs). - * $WIZ$ type = "int" - * $WIZ$ min = 1000 - */ -#define RAMP_DEF_TIME 6000000UL -/** - * Default ramp maxfreq (Hz). - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define RAMP_DEF_MAXFREQ 5000 -/** - * Default ramp minfreq (Hz). - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define RAMP_DEF_MINFREQ 200 -/** - * Default ramp powerrun (deciampere). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define RAMP_DEF_POWERRUN 10 -/** - * Default ramp poweridle (Hz). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define RAMP_DEF_POWERIDLE 1 - -#endif /* CFG_RAMP_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_randpool.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_randpool.h deleted file mode 100644 index 3038363e..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_randpool.h +++ /dev/null @@ -1,55 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for randpool module. - * - * - * \author Daniele Basile - */ - -#ifndef CFG_RANDPOOL_H -#define CFG_RANDPOOL_H - - -/** - * Define a size, in byte, of entropy pool. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_SIZE_ENTROPY_POOL 64 - -/// Enable timer in randpool algo. $WIZ$ type = "boolean" -#define CONFIG_RANDPOOL_TIMER 1 - -#endif /* CFG_RANDPOOL_H */ - - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_sd.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_sd.h deleted file mode 100644 index 8c40f827..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_sd.h +++ /dev/null @@ -1,75 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file Secure Digital module. - * - * - * \author Francesco Sacchi - */ - -#ifndef CFG_SD_H -#define CFG_SD_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define SD_LOG_LEVEL LOG_LVL_ERR - -/** - * Module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define SD_LOG_FORMAT LOG_FMT_VERBOSE - - -/** - * Enable autoassignment of SD driver to disk drive number 0 of FatFs module. - * $WIZ$ type = "boolean" - * $WIZ$ conditional_deps = "fat" - */ -#define CONFIG_SD_AUTOASSIGN_FAT 1 - -/** - * Enable backward compatibility for sd_init(). - * If enabled, sd_init() will allocate internally an Sd context, - * otherwise sd_init() will need the context to be passed explicitly. - * - * $WIZ$ type = "boolean" - */ -#define CONFIG_SD_OLD_INIT 1 - -#endif /* CFG_SD_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_sem.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_sem.h deleted file mode 100644 index 905f0455..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_sem.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * \file - * - * - * \brief Kernel semaphores configuration parameters. - * - * \author Bernie Innocenti - */ - -#ifndef CFG_SEM_H -#define CFG_SEM_H - -/** - * Re-entrant mutual exclusion primitives. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SEMAPHORES 1 - -#endif /* CFG_SEM_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ser.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ser.h deleted file mode 100644 index 91a10e0b..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_ser.h +++ /dev/null @@ -1,222 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for serial module. - * - * \author Daniele Basile - */ - -#ifndef CFG_SER_H -#define CFG_SER_H - -/** - * Example of setting for serial port and - * spi port. - * Edit these define for your project. - */ - -/** - * Size of the outbound FIFO buffer for port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_UART0_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_UART0_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)" - */ -#define CONFIG_UART1_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)" - */ -#define CONFIG_UART1_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 2 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2" - */ -#define CONFIG_UART2_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 2 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lm3s or lpc2" - */ -#define CONFIG_UART2_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for port 3 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lpc2" - */ -#define CONFIG_UART3_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for port 3 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "lpc2" - */ -#define CONFIG_UART3_RXBUFSIZE 32 - - -/** - * Size of the outbound FIFO buffer for SPI port [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for SPI port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI0_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port 0 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI0_RXBUFSIZE 32 - -/** - * Size of the outbound FIFO buffer for SPI port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI1_TXBUFSIZE 32 - -/** - * Size of the inbound FIFO buffer for SPI port 1 [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - * $WIZ$ supports = "at91" - */ -#define CONFIG_SPI1_RXBUFSIZE 32 - -/** - * SPI data order. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_order_bit" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST - -/** - * SPI clock division factor. - * $WIZ$ type = "int" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_DIV 16 - -/** - * SPI clock polarity: normal low or normal high. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_spi_pol" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW - -/** - * SPI clock phase you can choose sample on first edge or - * sample on second clock edge. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ser_spi_phase" - * $WIZ$ supports = "avr" - */ -#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE - -/** - * Default transmit timeout (ms). Set to -1 to disable timeout support. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_SER_TXTIMEOUT -1 - -/** - * Default receive timeout (ms). Set to -1 to disable timeout support. - * $WIZ$ type = "int" - * $WIZ$ min = -1 - */ -#define CONFIG_SER_RXTIMEOUT -1 - -/** - * Use RTS/CTS handshake. - * $WIZ$ type = "boolean" - * $WIZ$ supports = "False" - */ -#define CONFIG_SER_HWHANDSHAKE 0 - -/** - * Default baudrate for all serial ports (set to 0 to disable). - * $WIZ$ type = "int" - * $WIZ$ min = 0 - */ -#define CONFIG_SER_DEFBAUDRATE 0UL - -/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean" -#define CONFIG_SER_STROBE 0 - -#endif /* CFG_SER_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_signal.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_signal.h deleted file mode 100644 index ce5324ec..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_signal.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * \file - * - * - * \brief Kernel signals configuration parameters - * - * \author Bernie Innocenti - */ - -#ifndef CFG_SIGNAL_H -#define CFG_SIGNAL_H - -/** - * Inter-process signals. - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_KERN_SIGNALS 1 - -#endif /* CFG_SIGNAL_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_spi_bitbang.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_spi_bitbang.h deleted file mode 100644 index 1a3a8a92..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_spi_bitbang.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for SPI bitbang module. - * - * - * \author Daniele Basile - */ - -#ifndef CFG_SPI_BITBANG_H -#define CFG_SPI_BITBANG_H - -/** - * Set data order for emulated SPI. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "ordet_bit_list" - */ -#define CONFIG_SPI_DATAORDER SPI_LSB_FIRST - -#endif /* CFG_SPI_BITBANG_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_stepper.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_stepper.h deleted file mode 100644 index 2925fb66..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_stepper.h +++ /dev/null @@ -1,69 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for stepper motor module. - * - * \author Daniele Basile - */ - -#ifndef CFG_STEPPER_H -#define CFG_STEPPER_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define STEPPER_LOG_LEVEL LOG_LVL_INFO - -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define STEPPER_LOG_FORMAT LOG_FMT_TERSE - -/** - * Max number of the stepper motor. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_NUM_STEPPER_MOTORS 6 - -/** - * Max number of the timer usable on target to drive stepper motor. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_TC_STEPPER_MAX_NUM 6 - -#endif /* CFG_STEPPER_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_tas5706a.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_tas5706a.h deleted file mode 100644 index 32b3598f..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_tas5706a.h +++ /dev/null @@ -1,50 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for the TAS5706A module. - * - * \author Luca Ottaviano - */ - -#ifndef CFG_TAS5706A_H -#define CFG_TAS5706A_H - -/** - * Maximum output volume for TAS chip [dB]. - * - * $WIZ$ type = "int" - * $WIZ$ min = -100 - * $WIZ$ max = 24 - */ -#define CONFIG_TAS_MAX_VOL -39 - -#endif /* CFG_TAS5706A_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_thermo.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_thermo.h deleted file mode 100644 index 2734f899..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_thermo.h +++ /dev/null @@ -1,71 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for thermo module. - * - * \author Daniele Basile - */ - -#ifndef CFG_THERMO_H -#define CFG_THERMO_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define CONFIG_THERMO_LOG_LEVEL LOG_LVL_ERR -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define CONFIG_THERMO_LOG_FORMAT LOG_FMT_TERSE - - -/** - * Interval at which thermo control is performed [ms]. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_THERMO_INTERVAL_MS 100 - -/** - * Number of different samples we interpolate over to get the hifi temperature. - * - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_THERMO_HIFI_NUM_SAMPLES 10 - -#endif /* CFG_THERMO_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_timer.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_timer.h deleted file mode 100644 index b6d43b38..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_timer.h +++ /dev/null @@ -1,67 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for timer module. - * - * - * \author Daniele Basile - */ - -#ifndef CFG_TIMER_H -#define CFG_TIMER_H - -/** - * Hardware timer selection for drv/timer.c. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "timer_select" - */ -#define CONFIG_TIMER TIMER_DEFAULT - -/** - * Debug timer interrupt using a strobe pin. - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_STROBE 0 - -/** - * Enable asynchronous timers. - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_EVENTS 1 - -/** - * Support hi-res timer_usleep(). - * $WIZ$ type = "boolean" - */ -#define CONFIG_TIMER_UDELAY 1 - -#endif /* CFG_TIMER_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usb.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usb.h deleted file mode 100644 index e5a282b1..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usb.h +++ /dev/null @@ -1,64 +0,0 @@ -/** - * \file - * - * - * \author Andrea Righi - * - * \brief Configuration file for the USB driver module - */ - -#ifndef CFG_USB_H -#define CFG_USB_H - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define USB_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define USB_LOG_FORMAT LOG_FMT_TERSE - -/** - * Size of the USB buffer used for endpoint transfers [bytes]. - * $WIZ$ type = "int" - * $WIZ$ min = 2 - */ -#define CONFIG_USB_BUFSIZE 64 - -#endif /* CFG_USB_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usbkbd.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usbkbd.h deleted file mode 100644 index 5b6fb65a..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usbkbd.h +++ /dev/null @@ -1,78 +0,0 @@ -/** - * \file - * - * - * \author Andrea Righi - * - * \brief Configuration file for the usbkbd driver module - */ - -#ifndef CFG_USBKBD_H -#define CFG_USBKBD_H - -/** - * Enable the usbkbd module. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_USBKBD 0 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define USB_KEYBOARD_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define USB_KEYBOARD_LOG_FORMAT LOG_FMT_TERSE - -/** - * USB vendor ID (please change this in your project, using a valid ID number!). - * - * $WIZ$ type = "hex" - */ -#define USB_KEYBOARD_VENDOR_ID 0x046d - -/** - * USB product ID (please change this in your project, using a valid ID number!). - * - * $WIZ$ type = "hex" - */ -#define USB_KEYBOARD_PRODUCT_ID 0xffff - -#endif /* CFG_USB_KEYBOARD_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usbmouse.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usbmouse.h deleted file mode 100644 index 73143284..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usbmouse.h +++ /dev/null @@ -1,78 +0,0 @@ -/** - * \file - * - * - * \author Andrea Righi - * - * \brief Configuration file for the usbmouse driver module - */ - -#ifndef CFG_USBMOUSE_H -#define CFG_USBMOUSE_H - -/** - * Enable the usbmouse module. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_USBMOUSE 0 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define USB_MOUSE_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define USB_MOUSE_LOG_FORMAT LOG_FMT_TERSE - -/** - * USB vendor ID (please change this in your project, using a valid ID number!). - * - * $WIZ$ type = "hex" - */ -#define USB_MOUSE_VENDOR_ID 0xffff - -/** - * USB product ID (please change this in your project, using a valid ID number!). - * - * $WIZ$ type = "hex" - */ -#define USB_MOUSE_PRODUCT_ID 0x0000 - -#endif /* CFG_USBMOUSE_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usbser.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usbser.h deleted file mode 100644 index 1fa44e73..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_usbser.h +++ /dev/null @@ -1,78 +0,0 @@ -/** - * \file - * - * - * \author Andrea Righi - * - * \brief Configuration file for the USB serial driver module - */ - -#ifndef CFG_USBSER_H -#define CFG_USBSER_H - -/** - * Enable the usb-serial module. - * - * $WIZ$ type = "autoenabled" - */ -#define CONFIG_USBSER 0 - -/** - * Module logging level. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define USB_SERIAL_LOG_LEVEL LOG_LVL_INFO - -/** - * module logging format. - * - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define USB_SERIAL_LOG_FORMAT LOG_FMT_TERSE - -/** - * USB vendor ID (please change this in your project, using a valid ID number!). - * - * $WIZ$ type = "hex" - */ -#define USB_SERIAL_VENDOR_ID 0x05f9 - -/** - * USB product ID (please change this in your project, using a valid ID number!). - * - * $WIZ$ type = "hex" - */ -#define USB_SERIAL_PRODUCT_ID 0xffff - -#endif /* CFG_USBSER_H */ diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_wdt.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_wdt.h deleted file mode 100644 index b53b327e..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_wdt.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for watchdog module. - * - * - * \author Daniele Basile - */ - -#ifndef CFG_WDT_H -#define CFG_WDT_H - -/// Enable watchdog timer. $WIZ$ type = "autoenabled" -#define CONFIG_WATCHDOG 0 - -#endif /* CFG_WDT_H */ - - diff --git a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_xmodem.h b/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_xmodem.h deleted file mode 100644 index 38db7359..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/cfg/cfg_xmodem.h +++ /dev/null @@ -1,79 +0,0 @@ -/** - * \file - * - * - * \brief Configuration file for xmodem module. - * - * \author Daniele Basile - */ - -#ifndef CFG_XMODEM_H -#define CFG_XMODEM_H - -/** - * Module logging level. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_level" - */ -#define CONFIG_XMODEM_LOG_LEVEL LOG_LVL_ERR -/** - * Module logging format. - * $WIZ$ type = "enum" - * $WIZ$ value_list = "log_format" - */ -#define CONFIG_XMODEM_LOG_FORMAT LOG_FMT_TERSE - - -/// Enable Rx. $WIZ$ type = "boolean" -#define CONFIG_XMODEM_RECV 1 - -/// Enable TX. $WIZ$ type = "boolean" -#define CONFIG_XMODEM_SEND 1 - -/// Allow a Rx/Tx of 1Kbyte block. $WIZ$ type = "boolean" -#define CONFIG_XMODEM_1KCRC 1 - -/** - * Max retries before giving up. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_XMODEM_MAXRETRIES 15 - -/** - * Max retries before switching to BCC. - * $WIZ$ type = "int" - * $WIZ$ min = 1 - */ -#define CONFIG_XMODEM_MAXCRCRETRIES 7 - -#endif /* CFG_XMODEM_H */ - diff --git a/boards/at91sam7x-ek/examples/tcp_server/main.c b/boards/at91sam7x-ek/examples/tcp_server/main.c deleted file mode 100644 index c99a995d..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/main.c +++ /dev/null @@ -1,157 +0,0 @@ -/** - * \file - * - * - * \author Andrea Righi - * - * \brief lwIP TCP/IP echo server listening on port 80. - */ - -#include "hw/hw_led.h" - -#include - -#include -#include - -#include -#include - -#include -#include - -#include - -#include -#include -#include -#include -#include - -static Serial out; - -/* Network interface global variables */ -static struct ip_addr ipaddr, netmask, gw; -static struct netif netif; - -static void init(void) -{ - /* Enable all the interrupts */ - IRQ_ENABLE; - - /* Initialize debugging module (allow kprintf(), etc.) */ - kdbg_init(); - /* Initialize system timer */ - timer_init(); - /* Initialize UART0 */ - ser_init(&out, SER_UART0); - /* Configure UART0 to work at 115.200 bps */ - ser_setbaudrate(&out, 115200); - /* Initialize LED driver */ - LED_INIT(); - - /* - * Kernel initialization: processes (allow to create and dispatch - * processes using proc_new()). - */ - proc_init(); - - /* Initialize TCP/IP stack */ - tcpip_init(NULL, NULL); - - /* Bring up the network interface */ - netif_add(&netif, &ipaddr, &netmask, &gw, NULL, ethernetif_init, ip_input); - netif_set_default(&netif); - netif_set_up(&netif); -} - -static int tot_req; - -static NORETURN void monitor_process(void) -{ - int start = tot_req; - - while (1) - { - monitor_report(); - kprintf("tot_req=%d [%d reqs/s]\n", tot_req, tot_req - start); - start = tot_req; - timer_delay(1000); - } -} - -int main(void) -{ - struct netconn *server; - - /* Hardware initialization */ - init(); - - proc_new(monitor_process, NULL, KERN_MINSTACKSIZE * 2, NULL); - - dhcp_start(&netif); - while (!netif.ip_addr.addr) - { - dhcp_fine_tmr(); - timer_delay(DHCP_FINE_TIMER_MSECS); - } - kprintf(">>> dhcp ok: ip = %#x (kernel %s)\n", - (unsigned int)netif.ip_addr.addr, - CONFIG_KERN_PREEMPT ? "preempt" : "coop"); - - server = netconn_new(NETCONN_TCP); - netconn_bind(server, IP_ADDR_ANY, 80); - netconn_listen(server); - - while (1) - { - struct netconn *client; - struct netbuf *rx_buf_conn; - char *rx_buf; - u16_t len; - - client = netconn_accept(server); - if (!client) - continue; - - tot_req++; - rx_buf_conn = netconn_recv(client); - if (rx_buf_conn) - { - netbuf_data(rx_buf_conn, (void **)&rx_buf, &len); - if (rx_buf) - netconn_write(client, rx_buf, len, NETCONN_COPY); - netbuf_delete(rx_buf_conn); - } - while (netconn_delete(client) != ERR_OK) - cpu_relax(); - } -} diff --git a/boards/at91sam7x-ek/examples/tcp_server/project.bertos b/boards/at91sam7x-ek/examples/tcp_server/project.bertos deleted file mode 100644 index 77567d8a..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/project.bertos +++ /dev/null @@ -1,93 +0,0 @@ -(dp0 -S'BERTOS_PATH' -p1 -S'../../../..' -p2 -sS'SELECTED_FREQ' -p3 -V48023000 -p4 -sS'WIZARD_VERSION' -p5 -I3 -sS'PROJECT_NAME' -p6 -Vtcp_server -p7 -sS'TOOLCHAIN' -p8 -(dp9 -Vtarget -p10 -Varm-none-eabi -p11 -sVthread -p12 -Vsingle -p13 -sVconfigured -p14 -V/scratch/julian/2010q1-release-eabi-lite/src/gcc-4.4-2010q1/configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=arm-none-eabi --enable-threads --disable-libmudflap --disable-libssp --disable-libstdcxx-pch --enable-extra-sgxxlite-multilibs --with-gnu-as --with-gnu-ld --with-specs='%{O2:%{!fno-remove-local-statics: -fremove-local-statics}} %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: -fremove-local-statics}}}' --enable-languages=c,c++ --disable-shared --disable-lto --with-newlib --with-pkgversion='Sourcery G++ Lite 2010q1-188' --with-bugurl=https://support.codesourcery.com/GNUToolchain/ --disable-nls --prefix=/opt/codesourcery --with-headers=yes --with-sysroot=/opt/codesourcery/arm-none-eabi --with-build-sysroot=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi --with-gmp=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-mpfr=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-ppl=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-cloog=/scratch/julian/2010q1-release-eabi-lite/obj/host-libs-2010q1-188-arm-none-eabi-i686-pc-linux-gnu/usr --disable-libgomp --enable-poison-system-directories --with-build-time-tools=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi/bin --with-build-time-tools=/scratch/julian/2010q1-release-eabi-lite/install/arm-none-eabi/bin -p15 -sVversion -p16 -V4.4.1 -p17 -sVbuild -p18 -VSourcery G++ Lite 2010q1-188 -p19 -sVpath -p20 -V/opt/sourcery/bin/arm-none-eabi-gcc -p21 -ssS'ENABLED_MODULES' -p22 -(lp23 -S'monitor' -p24 -aS'signal' -p25 -aS'debug' -p26 -aS'kernel' -p27 -aS'ser' -p28 -aS'kfile' -p29 -aS'timer' -p30 -aS'eth' -p31 -aS'formatwr' -p32 -aS'msg' -p33 -aS'semaphores' -p34 -aS'heap' -p35 -aS'lwip' -p36 -asS'CPU_NAME' -p37 -VAT91SAM7X256 -p38 -sS'PROJECT_HW_PATH' -p39 -S'../..' -p40 -sS'PROJECT_SRC_PATH' -p41 -S'.' -p42 -sS'PRESET' -p43 -I01 -sS'OUTPUT' -p44 -(lp45 -S'codelite' -p46 -as. \ No newline at end of file diff --git a/boards/at91sam7x-ek/examples/tcp_server/tcp_server.mk b/boards/at91sam7x-ek/examples/tcp_server/tcp_server.mk deleted file mode 100644 index 91c4c446..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/tcp_server.mk +++ /dev/null @@ -1,99 +0,0 @@ -# -# Wizard autogenerated makefile. -# DO NOT EDIT, use the tcp_server_user.mk file instead. -# - -# Constants automatically defined by the selected modules -tcp_server_DEBUG = 1 - -# Our target application -TRG += tcp_server - -tcp_server_PREFIX = "arm-none-eabi-" - -tcp_server_SUFFIX = "" - -tcp_server_SRC_PATH = boards/at91sam7x-ek/examples/tcp_server - -tcp_server_HW_PATH = boards/at91sam7x-ek - -# Files automatically generated by the wizard. DO NOT EDIT, USE tcp_server_USER_CSRC INSTEAD! -tcp_server_WIZARD_CSRC = \ - bertos/cpu/arm/drv/timer_arm.c \ - bertos/mware/event.c \ - bertos/kern/sem.c \ - bertos/cpu/arm/drv/sysirq_at91.c \ - bertos/struct/heap.c \ - bertos/io/kfile.c \ - bertos/mware/hex.c \ - bertos/cpu/arm/drv/timer_at91.c \ - bertos/cpu/arm/drv/ser_at91.c \ - bertos/cpu/arm/drv/eth_at91.c \ - bertos/drv/timer.c \ - bertos/kern/signal.c \ - bertos/kern/proc.c \ - bertos/mware/formatwr.c \ - bertos/drv/ser.c \ - bertos/kern/monitor.c \ - bertos/net/lwip.c \ - bertos/cpu/arm/drv/ser_arm.c \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE tcp_server_USER_PCSRC INSTEAD! -tcp_server_WIZARD_PCSRC = \ - \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE tcp_server_USER_CPPASRC INSTEAD! -tcp_server_WIZARD_CPPASRC = \ - bertos/cpu/arm/hw/switch_ctx_arm.S \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE tcp_server_USER_CXXSRC INSTEAD! -tcp_server_WIZARD_CXXSRC = \ - \ - # - -# Files automatically generated by the wizard. DO NOT EDIT, USE tcp_server_USER_ASRC INSTEAD! -tcp_server_WIZARD_ASRC = \ - \ - # - -tcp_server_CPPFLAGS = -D'CPU_FREQ=(48023000UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -I$(tcp_server_HW_PATH) -I$(tcp_server_SRC_PATH) $(tcp_server_CPU_CPPFLAGS) $(tcp_server_USER_CPPFLAGS) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -tcp_server_LDFLAGS = $(tcp_server_CPU_LDFLAGS) $(tcp_server_WIZARD_LDFLAGS) $(tcp_server_USER_LDFLAGS) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -tcp_server_CPPAFLAGS = $(tcp_server_CPU_CPPAFLAGS) $(tcp_server_WIZARD_CPPAFLAGS) $(tcp_server_USER_CPPAFLAGS) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -tcp_server_CSRC = $(tcp_server_CPU_CSRC) $(tcp_server_WIZARD_CSRC) $(tcp_server_USER_CSRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -tcp_server_PCSRC = $(tcp_server_CPU_PCSRC) $(tcp_server_WIZARD_PCSRC) $(tcp_server_USER_PCSRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -tcp_server_CPPASRC = $(tcp_server_CPU_CPPASRC) $(tcp_server_WIZARD_CPPASRC) $(tcp_server_USER_CPPASRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -tcp_server_CXXSRC = $(tcp_server_CPU_CXXSRC) $(tcp_server_WIZARD_CXXSRC) $(tcp_server_USER_CXXSRC) - -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -tcp_server_ASRC = $(tcp_server_CPU_ASRC) $(tcp_server_WIZARD_ASRC) $(tcp_server_USER_ASRC) - -# CPU specific flags and options, defined in the CPU definition files. -# Automatically generated by the wizard. PLEASE DO NOT EDIT! -tcp_server_CPU_CPPASRC = bertos/cpu/arm/hw/crt_arm7tdmi.S bertos/cpu/arm/hw/vectors_at91.S -tcp_server_CPU_CPPAFLAGS = -g -gdwarf-2 -tcp_server_CPU_CPPFLAGS = -O0 -g3 -gdwarf-2 -fverbose-asm -Ibertos/cpu/arm/ -D__ARM_AT91SAM7X256__ -tcp_server_CPU_CSRC = bertos/cpu/arm/hw/init_at91.c -tcp_server_PROGRAMMER_CPU = at91sam7 -tcp_server_CPU_LDFLAGS = -nostartfiles -Wl,--no-warn-mismatch -T bertos/cpu/arm/scripts/at91sam7_256_rom.ld -tcp_server_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh -tcp_server_CPU = arm7tdmi -tcp_server_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh -tcp_server_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh -tcp_server_FLASH_SCRIPT = bertos/prg_scripts/arm/flash.sh - -include $(tcp_server_SRC_PATH)/tcp_server_user.mk diff --git a/boards/at91sam7x-ek/examples/tcp_server/tcp_server_user.mk b/boards/at91sam7x-ek/examples/tcp_server/tcp_server_user.mk deleted file mode 100644 index 2e889937..00000000 --- a/boards/at91sam7x-ek/examples/tcp_server/tcp_server_user.mk +++ /dev/null @@ -1,44 +0,0 @@ -# -# User makefile. -# Edit this file to change compiler options and related stuff. -# - -# Programmer interface configuration, see http://dev.bertos.org/wiki/ProgrammerInterface for help -tcp_server_PROGRAMMER_TYPE = none -tcp_server_PROGRAMMER_PORT = none - -# Files included by the user. -tcp_server_USER_CSRC = \ - $(tcp_server_SRC_PATH)/main.c \ - # - -# Files included by the user. -tcp_server_USER_PCSRC = \ - # - -# Files included by the user. -tcp_server_USER_CPPASRC = \ - # - -# Files included by the user. -tcp_server_USER_CXXSRC = \ - # - -# Files included by the user. -tcp_server_USER_ASRC = \ - # - -# Flags included by the user. -tcp_server_USER_LDFLAGS = \ - # - -# Flags included by the user. -tcp_server_USER_CPPAFLAGS = \ - # - -# Flags included by the user. -tcp_server_USER_CPPFLAGS = \ - -Os \ - -fno-strict-aliasing \ - -fwrapv \ - #