From: Bernie Innocenti Date: Tue, 8 Mar 2011 20:23:25 +0000 (-0500) Subject: Initial commit (autogenerated files) X-Git-Url: https://codewiz.org/gitweb?p=rmslog.git;a=commitdiff_plain;h=d628a65a3e1ab1a3e3f11dcbd65bca85174d36a9 Initial commit (autogenerated files) --- d628a65a3e1ab1a3e3f11dcbd65bca85174d36a9 diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..65c2da0 --- /dev/null +++ b/Makefile @@ -0,0 +1,17 @@ +# +# Copyright 2009 Develer S.r.l. (http://www.develer.com/) +# All rights reserved. +# +# Author: Lorenzo Berni +# + +# Set to 1 for verbose build output, 0 for terse output +V := 0 + +default: all + +include bertos/config.mk + +include rmslog/rmslog.mk + +include bertos/rules.mk diff --git a/VERSION b/VERSION new file mode 100644 index 0000000..e520145 --- /dev/null +++ b/VERSION @@ -0,0 +1 @@ +BeRTOS 2.6.99 [local copy] diff --git a/bertos b/bertos new file mode 120000 index 0000000..c8bbc56 --- /dev/null +++ b/bertos @@ -0,0 +1 @@ +/home/bernie/src/develer/bertos/bertos \ No newline at end of file diff --git a/buildrev.h b/buildrev.h new file mode 100644 index 0000000..2c1018d --- /dev/null +++ b/buildrev.h @@ -0,0 +1,2 @@ +#define VERS_BUILD 2 +#define VERS_HOST "giskard.codewiz.org" diff --git a/project.bertos b/project.bertos new file mode 100644 index 0000000..5aba5b9 --- /dev/null +++ b/project.bertos @@ -0,0 +1,70 @@ +(dp0 +S'BERTOS_PATH' +p1 +S'.' +p2 +sS'SELECTED_FREQ' +p3 +V16000000 +p4 +sS'WIZARD_VERSION' +p5 +I4 +sS'PROJECT_NAME' +p6 +Vrmslog +p7 +sS'TOOLCHAIN' +p8 +(dp9 +S'path' +p10 +V/usr/bin/avr-gcc +p11 +ssS'PROJECT_HW_PATH_FROM_MAKEFILE' +p12 +g7 +sS'ENABLED_MODULES' +p13 +(lp14 +S'signal' +p15 +aS'debug' +p16 +aS'kernel' +p17 +aS'ser' +p18 +aS'kfile' +p19 +aS'monitor' +p20 +aS'timer' +p21 +aS'formatwr' +p22 +aS'semaphores' +p23 +aS'heap' +p24 +asS'CPU_NAME' +p25 +VATmega328P +p26 +sS'PROJECT_HW_PATH' +p27 +Vrmslog +p28 +sS'PROJECT_SRC_PATH' +p29 +Vrmslog +p30 +sS'PRESET' +p31 +NsS'PROJECT_SRC_PATH_FROM_MAKEFILE' +p32 +g7 +sS'OUTPUT' +p33 +(lp34 +s. \ No newline at end of file diff --git a/rmslog/.spec b/rmslog/.spec new file mode 100644 index 0000000..04a79cf --- /dev/null +++ b/rmslog/.spec @@ -0,0 +1,9 @@ +name = 'kernel preset' +advanced = True +description=""" +

+This is a minimalist kernel project: it just initializes the hardware and +creates an independent process to blink an LED, while the main loop +continues to monitor the stack utilization of all the processes. +

+""" diff --git a/rmslog/cfg/cfg_adc.h b/rmslog/cfg/cfg_adc.h new file mode 100644 index 0000000..df2587b --- /dev/null +++ b/rmslog/cfg/cfg_adc.h @@ -0,0 +1,112 @@ +/** + * \file + * + * + * \brief Configuration file for the ADC module. + * + * \author Daniele Basile + */ + +#ifndef CFG_ADC_H +#define CFG_ADC_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define ADC_LOG_LEVEL LOG_LVL_INFO + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define ADC_LOG_FORMAT LOG_FMT_VERBOSE + +/** + * Clock Frequency for ADC conversion. + * This frequency will be rounded down to an integer + * submultiple of CPU_FREQ. + * + * $WIZ$ type = "int" + * $WIZ$ supports = "at91" + * $WIZ$ max = 5000000 + */ +#define CONFIG_ADC_CLOCK 4800000UL + +/** + * Minimum time for starting up a conversion [us]. + * + * $WIZ$ type = "int" + * $WIZ$ min = 20 + * $WIZ$ supports = "at91" + */ +#define CONFIG_ADC_STARTUP_TIME 20 + +/** + * Minimum time for sample and hold [ns]. + * + * $WIZ$ type = "int" + * $WIZ$ min = 600 + * $WIZ$ supports = "at91" + */ +#define CONFIG_ADC_SHTIME 834 + +/** + * ADC Voltage Reference. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "avr_adc_refs" + * $WIZ$ supports = "avr" + */ +#define CONFIG_ADC_AVR_REF ADC_AVR_AVCC + +/** + * ADC clock divisor from main crystal. + * + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ max = 128 + * $WIZ$ supports = "avr" + */ +#define CONFIG_ADC_AVR_DIVISOR 2 + +/** + * Enable ADC strobe for debugging ADC ISR. + * + * $WIZ$ type = "boolean" + */ +#define CONFIG_ADC_STROBE 0 + +#endif /* CFG_ADC_H */ diff --git a/rmslog/cfg/cfg_afsk.h b/rmslog/cfg/cfg_afsk.h new file mode 100644 index 0000000..cce47c1 --- /dev/null +++ b/rmslog/cfg/cfg_afsk.h @@ -0,0 +1,113 @@ +/** + * \file + * + * + * \brief Configuration file for AFSK1200 modem. + * + * \author Francesco Sacchi + */ + +#ifndef CFG_AFSK_H +#define CFG_AFSK_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define AFSK_LOG_LEVEL LOG_LVL_WARN + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define AFSK_LOG_FORMAT LOG_FMT_TERSE + + +/** + * AFSK discriminator filter type. + * + * $WIZ$ type = "enum"; value_list = "afsk_filter_list" + */ +#define CONFIG_AFSK_FILTER AFSK_CHEBYSHEV + + +/** + * AFSK receiver buffer length. + * + * $WIZ$ type = "int" + * $WIZ$ min = 2 + */ +#define CONFIG_AFSK_RX_BUFLEN 32 + +/** + * AFSK transimtter buffer length. + * + * $WIZ$ type = "int" + * $WIZ$ min = 2 + */ +#define CONFIG_AFSK_TX_BUFLEN 32 + +/** + * AFSK DAC sample rate for modem outout. + * $WIZ$ type = "int" + * $WIZ$ min = 2400 + */ +#define CONFIG_AFSK_DAC_SAMPLERATE 9600 + +/** + * AFSK RX timeout in ms, set to -1 to disable. + * $WIZ$ type = "int" + * $WIZ$ min = -1 + */ +#define CONFIG_AFSK_RXTIMEOUT 0 + + +/** + * AFSK Preamble length in [ms], before starting transmissions. + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_AFSK_PREAMBLE_LEN 300UL + + + +/** + * AFSK Trailer length in [ms], before stopping transmissions. + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_AFSK_TRAILER_LEN 50UL + +#endif /* CFG_AFSK_H */ diff --git a/rmslog/cfg/cfg_ax25.h b/rmslog/cfg/cfg_ax25.h new file mode 100644 index 0000000..f561d21 --- /dev/null +++ b/rmslog/cfg/cfg_ax25.h @@ -0,0 +1,75 @@ +/** + * \file + * + * + * \brief Configuration file for the AX25 protocol module. + * + * \author Francesco Sacchi + */ + +#ifndef CFG_AX25_H +#define CFG_AX25_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define AX25_LOG_LEVEL LOG_LVL_WARN + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define AX25_LOG_FORMAT LOG_FMT_TERSE + +/** + * AX25 frame buffer lenght. + * + * $WIZ$ type = "int" + * $WIZ$ min = 18 + */ +#define CONFIG_AX25_FRAME_BUF_LEN 330 + + +/** + * Enable repeaters listing in AX25 frames. + * If enabled use 56 addtional bytes of RAM + * for each message received. + * + * $WIZ$ type = "boolean" + */ +#define CONFIG_AX25_RPT_LST 1 + +#endif /* CFG_AX25_H */ diff --git a/rmslog/cfg/cfg_battfs.h b/rmslog/cfg/cfg_battfs.h new file mode 100644 index 0000000..249dda7 --- /dev/null +++ b/rmslog/cfg/cfg_battfs.h @@ -0,0 +1,67 @@ +/** + * \file + * + * + * \brief Configuration file for BattFS module. + * + * \author Daniele Basile + */ + +#ifndef CFG_BATTFS_H +#define CFG_BATTFS_H + + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define BATTFS_LOG_LEVEL LOG_LVL_INFO + +/** + * module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define BATTFS_LOG_FORMAT LOG_FMT_VERBOSE + +/** + * Set to 1 to enable free page shuffling. + * This increase memories life but makes debugging + * more difficult due to its unrepeteable state. + * $WIZ$ type = "boolean" + */ +#define CONFIG_BATTFS_SHUFFLE_FREE_PAGES 0 + + +#endif /* BATTFS */ diff --git a/rmslog/cfg/cfg_context_switch.h b/rmslog/cfg/cfg_context_switch.h new file mode 100644 index 0000000..fe0b4f8 --- /dev/null +++ b/rmslog/cfg/cfg_context_switch.h @@ -0,0 +1,71 @@ +/** + * \file + * + * + * \brief Configuration file for the context switch benchmark. + * + * \author Daniele Basile + */ + +#ifndef CFG_CONTEXT_SWITCH_H +#define CFG_CONTEXT_SWITCH_H + +/** + * Use hp timer for the bechmark. + * + * $WIZ$ type = "boolean" + * $WIZ$ module= "boolean" + * $WIZ$ conditional_deps = "ser" + */ +#define CONFIG_USE_HP_TIMER 1 + + +/** + * Use board led for benchmark. + * + * $WIZ$ type = "boolean" + */ +#define CONFIG_USE_LED 1 + + +/** + * Debug console port. + * $WIZ$ type = "int"; min = 0 + */ +#define CONFIG_CTX_DEBUG_PORT 0 + +/** + * Baudrate for the debug console. + * $WIZ$ type = "int"; min = 300 + */ +#define CONFIG_CTX_DEBUG_BAUDRATE 115200UL + +#endif /* CFG_CONTEXT_SWITCH_H */ diff --git a/rmslog/cfg/cfg_dataflash.h b/rmslog/cfg/cfg_dataflash.h new file mode 100644 index 0000000..4e7dfbd --- /dev/null +++ b/rmslog/cfg/cfg_dataflash.h @@ -0,0 +1,55 @@ +/** + * \file + * + * + * \brief Configuration file for data flash memory module. + * + * \author Daniele Basile + */ + +#ifndef CFG_DATAFLASH_H +#define CFG_DATAFLASH_H + +/** + * Module logging level. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define DATAFLASH_LOG_LEVEL LOG_LVL_INFO + +/** + * Module logging format. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define DATAFLASH_LOG_FORMAT LOG_FMT_TERSE + +#endif /* CFG_DATAFLASH_H */ diff --git a/rmslog/cfg/cfg_dc_motor.h b/rmslog/cfg/cfg_dc_motor.h new file mode 100644 index 0000000..fd9bac7 --- /dev/null +++ b/rmslog/cfg/cfg_dc_motor.h @@ -0,0 +1,111 @@ +/** + * \file + * + * + * \brief Configuration file for DC motor module. + * + * + * \author Daniele Basile + */ + +#ifndef CFG_DC_MOTOR_H +#define CFG_DC_MOTOR_H + +/** + * Number of the DC motors to manage. + * + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_NUM_DC_MOTOR 4 + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define DC_MOTOR_LOG_LEVEL LOG_LVL_INFO + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define DC_MOTOR_LOG_FORMAT LOG_FMT_VERBOSE + + +/** + * Min value of DC motor speed. + * \note Generally this value is the min value of the ADC conversion, + * if you use it. + * + * $WIZ$ type = "int" + */ +#define CONFIG_DC_MOTOR_MIN_SPEED 0 + + +/** + * Max value of DC motor speed. + * \note Generally this value is the max value of the ADC conversion, + * if you use it. + * + * $WIZ$ type = "int" + * $WIZ$ max = 65535 + */ +#define CONFIG_DC_MOTOR_MAX_SPEED 65535 + + +/** + * Sampling period in millisecond. + * $WIZ$ type = "int" + */ +#define CONFIG_DC_MOTOR_SAMPLE_PERIOD 40 + +/** + * Amount of millisecond before to read sample. + * $WIZ$ type = "int" + */ +#define CONFIG_DC_MOTOR_SAMPLE_DELAY 2 + +/** + * This control set which mode the driver use to lock share + * resources when we use the preempitive kernel. + * If we set to 1 we use the semaphore module otherwise the + * driver disable the switch context every time we need to access + * to shared sources. + * + * $WIZ$ type = "int" + */ +#define CONFIG_DC_MOTOR_USE_SEM 1 + +#endif /* CFG_DC_MOTOR_H */ diff --git a/rmslog/cfg/cfg_debug.h b/rmslog/cfg/cfg_debug.h new file mode 100644 index 0000000..1063984 --- /dev/null +++ b/rmslog/cfg/cfg_debug.h @@ -0,0 +1,70 @@ +/** + * \file + * + * + * \brief Configuration file for Debug module. + * + * + * \author Daniele Basile + */ + +#ifndef CFG_DEBUG_H +#define CFG_DEBUG_H + +/** + * Debug console port. + * $WIZ$ type = "int"; min = 0 + */ +#define CONFIG_KDEBUG_PORT 0 + +/** + * Baudrate for the debug console. + * $WIZ$ type = "int"; min = 300 + */ +#define CONFIG_KDEBUG_BAUDRATE 115200UL + +/** + * Clock source for the UART module. You need to write the code to reprogram the respective clock at the required frequency in your project before calling kdbg_init(). + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "kdbg_clk_src" + * $WIZ$ supports = "msp430" + */ +#define CONFIG_KDEBUG_CLOCK_SOURCE KDBG_UART_SMCLK + +/** + * Clock frequency. (Only if different from MCLK's frequency, otherwise leave it zero) + * $WIZ$ type = "int"; min = 0 + * $WIZ$ supports = "msp430" + */ +#define CONFIG_KDEBUG_CLOCK_FREQ 0UL + +#endif /* CFG_DEBUG_H */ diff --git a/rmslog/cfg/cfg_eeprom.h b/rmslog/cfg/cfg_eeprom.h new file mode 100644 index 0000000..b56c1f9 --- /dev/null +++ b/rmslog/cfg/cfg_eeprom.h @@ -0,0 +1,64 @@ +/** + * \file + * + * + * \brief Configuration file for the Eeprom module. + * + * \author Daniele Basile + */ + +#ifndef CFG_EEPROM_H +#define CFG_EEPROM_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define EEPROM_LOG_LEVEL LOG_LVL_INFO + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define EEPROM_LOG_FORMAT LOG_FMT_TERSE + +/** + * Check this to disable Eeprom deprecated API support. + * + * $WIZ$ type = "boolean" + */ +#define CONFIG_EEPROM_DISABLE_OLD_API 0 + +#endif /* CFG_EEPROM_H */ diff --git a/rmslog/cfg/cfg_emb_flash.h b/rmslog/cfg/cfg_emb_flash.h new file mode 100644 index 0000000..82d96e5 --- /dev/null +++ b/rmslog/cfg/cfg_emb_flash.h @@ -0,0 +1,73 @@ +/** + * \file + * + * + * \author Daniele Basile + * + * \brief Configuration file for embedded flash module. + */ + +#ifndef CFG_EMB_FLASH_H +#define CFG_EMB_FLASH_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define CONFIG_FLASH_EMB_LOG_LEVEL LOG_LVL_INFO + +/** + * module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define CONFIG_FLASH_EMB_LOG_FORMAT LOG_FMT_TERSE + + +/** + * Write emb flash timeout. + * For how many milliseconds the cpu wait + * to complete write operation. + * + * $WIZ$ type = "int" + */ +#define CONFIG_FLASH_WR_TIMEOUT 100 + +/** + * Check this to disable embedded flash deprecated API support. + * + * $WIZ$ type = "boolean" + */ +#define CONFIG_FLASH_DISABLE_OLD_API 0 + +#endif /* CFG_FLASH_AT91_H */ diff --git a/rmslog/cfg/cfg_eth.h b/rmslog/cfg/cfg_eth.h new file mode 100644 index 0000000..a378808 --- /dev/null +++ b/rmslog/cfg/cfg_eth.h @@ -0,0 +1,57 @@ +/** + * \file + * + * + * \author Andrea Righi + * + * \brief Configuration file for the generic ethernet driver module + */ + +#ifndef CFG_ETH_H +#define CFG_ETH_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define ETH_LOG_LEVEL LOG_LVL_WARN + +/** + * module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define ETH_LOG_FORMAT LOG_FMT_TERSE + +#endif /* CFG_ETH_H */ diff --git a/rmslog/cfg/cfg_fat.h b/rmslog/cfg/cfg_fat.h new file mode 100644 index 0000000..fcd717a --- /dev/null +++ b/rmslog/cfg/cfg_fat.h @@ -0,0 +1,156 @@ +/** + * \file + * + * + * \brief Configuration file for Fat module. + * + * + * \author Luca Ottaviano + * \author Francesco Sacchi + */ + +#ifndef CFG_FAT_H +#define CFG_FAT_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define FAT_LOG_LEVEL LOG_LVL_ERR + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define FAT_LOG_FORMAT LOG_FMT_VERBOSE + + +/** + * Use word alignment to access FAT structure. + * $WIZ$ type = "boolean" + */ +#define CONFIG_FAT_WORD_ACCESS 0 +#define _WORD_ACCESS CONFIG_FAT_WORD_ACCESS + +/** + * Enable read functions only. + * $WIZ$ type = "boolean" + */ +#define CONFIG_FAT_FS_READONLY 0 +#define _FS_READONLY CONFIG_FAT_FS_READONLY + +/** + * Minimization level to remove some functions. + * $WIZ$ type = "int"; min = 0; max = 3 + */ +#define CONFIG_FAT_FS_MINIMIZE 0 +#define _FS_MINIMIZE CONFIG_FAT_FS_MINIMIZE + +/** + * If enabled, this reduces memory consumption 512 bytes each file object by using a shared buffer. + * $WIZ$ type = "boolean" + */ +#define CONFIG_FAT_FS_TINY 1 +#define _FS_TINY CONFIG_FAT_FS_TINY + +/** + * To enable string functions, set _USE_STRFUNC to 1 or 2. + * $WIZ$ type = "int" + * $WIZ$ supports = "False" + */ +#define CONFIG_FAT_USE_STRFUNC 0 +#define _USE_STRFUNC CONFIG_FAT_USE_STRFUNC + +/** + * Enable f_mkfs function. Requires CONFIG_FAT_FS_READONLY = 0. + * $WIZ$ type = "boolean" + */ +#define CONFIG_FAT_USE_MKFS 0 +#define _USE_MKFS (CONFIG_FAT_USE_MKFS && !CONFIG_FAT_FS_READONLY) + +/** + * Enable f_forward function. Requires CONFIG_FAT_FS_TINY. + * $WIZ$ type = "boolean" + */ +#define CONFIG_FAT_USE_FORWARD 0 +#define _USE_FORWARD (CONFIG_FAT_USE_FORWARD && CONFIG_FAT_FS_TINY) + +/** + * Number of volumes (logical drives) to be used. + * $WIZ$ type = "int"; min = 1; max = 255 + */ +#define CONFIG_FAT_DRIVES 1 +#define _DRIVES CONFIG_FAT_DRIVES + +/** + * Maximum sector size to be handled. (512/1024/2048/4096). + * 512 for memory card and hard disk, 1024 for floppy disk, 2048 for MO disk + * $WIZ$ type = "int"; min = 512; max = 4096 + */ +#define CONFIG_FAT_MAX_SS 512 +#define _MAX_SS CONFIG_FAT_MAX_SS + +/** + * When _MULTI_PARTITION is set to 0, each volume is bound to the same physical + * drive number and can mount only first primaly partition. When it is set to 1, + * each volume is tied to the partitions listed in Drives[]. + * $WIZ$ type = "boolean" + * $WIZ$ supports = "False" + */ +#define CONFIG_FAT_MULTI_PARTITION 0 +#define _MULTI_PARTITION CONFIG_FAT_MULTI_PARTITION + +/** + * Specifies the OEM code page to be used on the target system. + * $WIZ$ type = "int" + */ +#define CONFIG_FAT_CODE_PAGE 850 +#define _CODE_PAGE CONFIG_FAT_CODE_PAGE + +/** + * Support for long filenames. Enable only if you have a valid Microsoft license. + * $WIZ$ type = "boolean" + */ +#define CONFIG_FAT_USE_LFN 0 +#define _USE_LFN CONFIG_FAT_USE_LFN + +/** + * Maximum Long File Name length to handle. + * $WIZ$ type = "int"; min = 8; max = 255 + */ +#define CONFIG_FAT_MAX_LFN 255 +#define _MAX_LFN CONFIG_FAT_MAX_LFN + +#endif /* CFG_FAT_H */ diff --git a/rmslog/cfg/cfg_flash25.h b/rmslog/cfg/cfg_flash25.h new file mode 100644 index 0000000..4b478b2 --- /dev/null +++ b/rmslog/cfg/cfg_flash25.h @@ -0,0 +1,51 @@ +/** + * \file + * + * + * \brief Configuration file for flash25 module. + * + * + * \author Daniele Basile + */ + +#ifndef CFG_FLASH25_H +#define CFG_FLASH25_H + +/** + * Eeprom memory type. + * + *$WIZ$ type = "enum" + *$WIZ$ value_list = "flash25_list" + */ +#define CONFIG_FLASH25 FLASH25_AT25F2048 + +#endif /* CFG_FALSH25_H */ + diff --git a/rmslog/cfg/cfg_formatwr.h b/rmslog/cfg/cfg_formatwr.h new file mode 100644 index 0000000..bac8aca --- /dev/null +++ b/rmslog/cfg/cfg_formatwr.h @@ -0,0 +1,65 @@ +/** + * \file + * + * + * \brief Configuration file for formatted write module. + * + * \author Daniele Basile + */ + +#ifndef CFG_FORMATWR_H +#define CFG_FORMATWR_H + +/** + * printf()-style formatter configuration. + * $WIZ$ type = "enum"; value_list = "printf_list" + * + * \sa PRINTF_DISABLED + * \sa PRINTF_NOMODIFIERS + * \sa PRINTF_REDUCED + * \sa PRINTF_NOFLOAT + * \sa PRINTF_FULL + */ +#define CONFIG_PRINTF PRINTF_FULL + +/** + * Size of buffer to format "%" sequences in printf. + * + * Warning: no check on buffer size is done when formatting, be careful especially + * with big numbers and %f formatting. + * + * $WIZ$ type = "int" + * $WIZ$ min = 4 + */ +#define CONFIG_FRMWRI_BUFSIZE 134 + +#endif /* CFG_FORMATWR_H */ + diff --git a/rmslog/cfg/cfg_gfx.h b/rmslog/cfg/cfg_gfx.h new file mode 100644 index 0000000..59dde04 --- /dev/null +++ b/rmslog/cfg/cfg_gfx.h @@ -0,0 +1,67 @@ +/** + * \file + * + * + * \brief Configuration file for GFX module. + * + * \author Daniele Basile + */ + +#ifndef CFG_GFX_H +#define CFG_GFX_H + +/** + * Enable line clipping algorithm. + * $WIZ$ type = "boolean" + */ +#define CONFIG_GFX_CLIPPING 1 + +/** + * Enable text rendering in bitmaps. + * $WIZ$ type = "boolean" + */ +#define CONFIG_GFX_TEXT 1 + +/** + * Enable virtual coordinate system. + * $WIZ$ type = "boolean" + */ +#define CONFIG_GFX_VCOORDS 1 + +/** + * Select bitmap pixel format. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "bitmap_format" + */ +#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB + +#endif /* CFG_GFX_H */ + diff --git a/rmslog/cfg/cfg_hashtable.h b/rmslog/cfg/cfg_hashtable.h new file mode 100644 index 0000000..e4645f3 --- /dev/null +++ b/rmslog/cfg/cfg_hashtable.h @@ -0,0 +1,51 @@ +/** + * \file + * + * + * \brief Configuration file for hashtable module. + * + * \author Daniele Basile + */ + +#ifndef CFG_HASHTABLE_H +#define CFG_HASHTABLE_H + +/** + * Enable/disable support to declare special hash tables which maintain a copy of the key internally instead of relying on the hook to extract it from the data. + * + * $WIZ$ type = "boolean" + */ +#define CONFIG_HT_OPTIONAL_INTERNAL_KEY 1 + +#endif /* CFG_HASHTABLE_H */ + + + diff --git a/rmslog/cfg/cfg_heap.h b/rmslog/cfg/cfg_heap.h new file mode 100644 index 0000000..e1a37b7 --- /dev/null +++ b/rmslog/cfg/cfg_heap.h @@ -0,0 +1,50 @@ +/** + * \file + * + * + * \brief Configuration file for heap module. + * + * + * \author Daniele Basile + */ + +#ifndef CFG_HEAP_H +#define CFG_HEAP_H + +/** + * Enable malloc/free like API. + * $WIZ$ type = "boolean" + */ +#define CONFIG_HEAP_MALLOC 1 + +#endif /* CFG_HEAP_H */ + + diff --git a/rmslog/cfg/cfg_i2c.h b/rmslog/cfg/cfg_i2c.h new file mode 100644 index 0000000..ea599a8 --- /dev/null +++ b/rmslog/cfg/cfg_i2c.h @@ -0,0 +1,83 @@ +/** + * \file + * + * + * \brief Configuration file for I2C module. + * + * \author Daniele Basile + */ + +#ifndef CFG_I2C_H +#define CFG_I2C_H + +/** +*Comunication frequency. +* +* $WIZ$ type = "int" +*/ +#define CONFIG_I2C_FREQ 100000UL + +/** + * I2C start timeout. + * For how many milliseconds the i2c_start + * should try to get an ACK before + * returning error. + * + * $WIZ$ type = "int" + */ +#define CONFIG_I2C_START_TIMEOUT 100 + +/** + * Check this to disable I2c deprecated API support. + * + * $WIZ$ type = "boolean" + */ +#define CONFIG_I2C_DISABLE_OLD_API 0 + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define I2C_LOG_LEVEL LOG_LVL_INFO + +/** + * module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define I2C_LOG_FORMAT LOG_FMT_TERSE + +#endif /* CFG_I2C_H */ + + diff --git a/rmslog/cfg/cfg_i2s.h b/rmslog/cfg/cfg_i2s.h new file mode 100644 index 0000000..6657157 --- /dev/null +++ b/rmslog/cfg/cfg_i2s.h @@ -0,0 +1,74 @@ +/** + * \file + * + * + * \brief Configuration file for I2S module. + * + * + * \author Luca Ottaviano + */ + +#ifndef CFG_I2S_H +#define CFG_I2S_H + +/** + * Length of each play buffer. + * + * $WIZ$ type = "int" + */ +#define CONFIG_PLAY_BUF_LEN 8192 + +/** + * Sampling frequency of the audio file. + * + * $WIZ$ type = "int" + * $WIZ$ min = 32000 + * $WIZ$ max = 192000 + */ +#define CONFIG_SAMPLE_FREQ 44100UL + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define I2S_LOG_LEVEL LOG_LVL_INFO + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define I2S_LOG_FORMAT LOG_FMT_TERSE + +#endif /* CFG_I2S_H */ diff --git a/rmslog/cfg/cfg_ini_reader.h b/rmslog/cfg/cfg_ini_reader.h new file mode 100644 index 0000000..d0be438 --- /dev/null +++ b/rmslog/cfg/cfg_ini_reader.h @@ -0,0 +1,48 @@ +/** + * \file + * + * + * \brief Configuration file for ini reader module. + * + * + * \author Luca Ottaviano + */ + +#ifndef CFG_INI_READER_H +#define CFG_INI_READER_H + +/** + * Maximum ini file line length (chars). + * $WIZ$ type = "int"; min = 1 + */ +#define CONFIG_INI_MAX_LINE_LEN 64 + +#endif /* CFG_INI_READER_H */ diff --git a/rmslog/cfg/cfg_kbd.h b/rmslog/cfg/cfg_kbd.h new file mode 100644 index 0000000..92aa272 --- /dev/null +++ b/rmslog/cfg/cfg_kbd.h @@ -0,0 +1,58 @@ +/** + * \file + * + * + * \brief Configuration file for keyboard module. + * + * + * \author Daniele Basile + */ + +#ifndef CFG_KBD_H +#define CFG_KBD_H + +/// Keyboard polling method. $WIZ$ supports = "False" +#define CONFIG_KBD_POLL KBD_POLL_SOFTINT + +/// Enable keyboard event delivery to observers. $WIZ$ type = "boolean" +#define CONFIG_KBD_OBSERVER 0 + +/// Enable key beeps. $WIZ$ type = "boolean" +#define CONFIG_KBD_BEEP 0 + +/// Enable long pression handler for keys. $WIZ$ type = "boolean" +#define CONFIG_KBD_LONGPRESS 0 + +/// Enable calling poor man's scheduler to be called inside kbd_peek. $WIZ$ type = "boolean" +#define CONFIG_KBD_SCHED 0 + +#endif /* CFG_KBD_H */ + diff --git a/rmslog/cfg/cfg_keytag.h b/rmslog/cfg/cfg_keytag.h new file mode 100644 index 0000000..8bedadf --- /dev/null +++ b/rmslog/cfg/cfg_keytag.h @@ -0,0 +1,61 @@ +/** + * \file + * + * + * \brief Configuration file for keytag module. + * + * \author Daniele Basile + */ + +#ifndef CFG_KEYTAG_H +#define CFG_KEYTAG_H + +/** + * Module logging level. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define CONFIG_KEYTAG_LOG_LEVEL LOG_LVL_ERR +/** + * Module logging format. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define CONFIG_KEYTAG_LOG_FORMAT LOG_FMT_TERSE + +/** + * Max buffer lenght + * $WIZ$ type = "int" + */ +#define CONFIG_TAG_MAX_LEN 14U + +#endif /* CFG_KEYTAG_H */ + diff --git a/rmslog/cfg/cfg_kfile.h b/rmslog/cfg/cfg_kfile.h new file mode 100644 index 0000000..0ebed7b --- /dev/null +++ b/rmslog/cfg/cfg_kfile.h @@ -0,0 +1,61 @@ +/** + * \file + * + * + * \brief Configuration file for KFile interface module. + * + * \author Daniele Basile + */ + +#ifndef CFG_KFILE_H +#define CFG_KFILE_H + +/** + * Module logging level. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define KFILE_LOG_LEVEL LOG_LVL_INFO + +/** + * Module logging format. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define KFILE_LOG_FORMAT LOG_FMT_TERSE + +/** + * Enable the gets function with echo. + * $WIZ$ type = "boolean" + */ +#define CONFIG_KFILE_GETS 0 + +#endif /* CFG_KFILE_H */ diff --git a/rmslog/cfg/cfg_lcd_32122a.h b/rmslog/cfg/cfg_lcd_32122a.h new file mode 100644 index 0000000..5a9b3ca --- /dev/null +++ b/rmslog/cfg/cfg_lcd_32122a.h @@ -0,0 +1,63 @@ +/** + * \file + * + * + * \brief Displaytech 32122A LCD driver configuration file. + * + * \author Bernie Innocenti + * \author Stefano Fedrigo + * + */ +#ifndef CFG_LCD_32122A_H +#define CFG_LCD_32122A_H + +/** + * Enable soft interrupt to refresh the LCD. + * $WIZ$ type = "boolean" + */ +#define CONFIG_LCD_SOFTINT_REFRESH 0 + +/** + * Enable wait macro when display is busy. + * $WIZ$ type = "boolean" + */ +#define CONFIG_LCD_WAIT 0 + +/** + * Display refresh time 32122a. + * $WIZ$ type = "int" + * $WIZ$ min = 0 + */ +#define CONFIG_LCD_REFRESH 100 + +#endif /* CFG_LCD_32122A_H */ + diff --git a/rmslog/cfg/cfg_lcd_hd44.h b/rmslog/cfg/cfg_lcd_hd44.h new file mode 100644 index 0000000..7bea437 --- /dev/null +++ b/rmslog/cfg/cfg_lcd_hd44.h @@ -0,0 +1,69 @@ +/** + * \file + * + * + * \brief Configuration file for lcd display module. + * + * \author Daniele Basile + */ + +#ifndef CFG_LCD_H +#define CFG_LCD_H + +/** + * Use 4 bit addressing mode. + * $WIZ$ type = "boolean" + */ +#define CONFIG_LCD_4BIT 0 + +/** + * Use a table to speed up LCD memory addressing. + * This will use about 100 bytes of RAM. + * $WIZ$ type = "boolean" + */ +#define CONFIG_LCD_ADDRESS_FAST 1 + +/** + * Number of columns in LCD display. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "lcd_hd44_cols" + */ +#define CONFIG_LCD_COLS LCD_HD44_COLS_16 + +/** + * Number of rows in LCD display. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "lcd_hd44_rows" + */ +#define CONFIG_LCD_ROWS LCD_HD44_ROWS_2 + +#endif /* CFG_LCD_H */ + diff --git a/rmslog/cfg/cfg_lm75.h b/rmslog/cfg/cfg_lm75.h new file mode 100644 index 0000000..91b347a --- /dev/null +++ b/rmslog/cfg/cfg_lm75.h @@ -0,0 +1,57 @@ +/** + * \file + * + * + * \brief Configuration file for the LM75 sensor temperature. + * + * \author Daniele Basile + */ + +#ifndef CFG_LM75_H +#define CFG_LM75_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define LM75_LOG_LEVEL LOG_LVL_WARN + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define LM75_LOG_FORMAT LOG_FMT_TERSE + +#endif /* CFG_AX25_H */ diff --git a/rmslog/cfg/cfg_lwip.h b/rmslog/cfg/cfg_lwip.h new file mode 100644 index 0000000..b6b55f6 --- /dev/null +++ b/rmslog/cfg/cfg_lwip.h @@ -0,0 +1,1856 @@ +/** + * \file + * + * + * \author Andrea Righi + * + * \brief Configuration file for the lwIP TCP/IP stack module + */ + +/* + * Copyright (c) 2001-2004 Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + * + * This file is part of the lwIP TCP/IP stack. + * + * Author: Adam Dunkels + * + */ +#ifndef CFG_LWIP_H +#define CFG_LWIP_H + +/* + ----------------------------------------------- + ---------- Platform specific locking ---------- + ----------------------------------------------- +*/ + +/** + * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain + * critical regions during buffer allocation, deallocation and memory + * allocation and deallocation. + */ +#ifndef SYS_LIGHTWEIGHT_PROT +#define SYS_LIGHTWEIGHT_PROT 1 +#endif + +/** + * NO_SYS==1: Provides VERY minimal functionality. Otherwise, + * use lwIP facilities. + */ +#ifndef NO_SYS +#define NO_SYS 0 +#endif + +/** + * MEMCPY: override this if you have a faster implementation at hand than the + * one included in your C library + */ +#ifndef MEMCPY +#define MEMCPY(dst,src,len) memcpy(dst,src,len) +#endif + +/** + * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a + * call to memcpy() if the length is known at compile time and is small. + */ +#ifndef SMEMCPY +#define SMEMCPY(dst,src,len) memcpy(dst,src,len) +#endif + +/* + ------------------------------------ + ---------- Memory options ---------- + ------------------------------------ +*/ +/** + * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library + * instead of the lwip internal allocator. Can save code size if you + * already use it. + */ +#ifndef MEM_LIBC_MALLOC +#define MEM_LIBC_MALLOC 0 +#endif + +/** + * Use mem_malloc/mem_free instead of the lwip pool allocator. + * + * $WIZ$ type = "boolean" + */ +#ifndef MEMP_MEM_MALLOC +#define MEMP_MEM_MALLOC 0 +#endif + +/** + * MEM_ALIGNMENT: should be set to the alignment of the CPU + * \verbatim + * 4 byte alignment -> #define MEM_ALIGNMENT 4 + * 2 byte alignment -> #define MEM_ALIGNMENT 2 + * \endverbatim + */ +#ifndef MEM_ALIGNMENT +#define MEM_ALIGNMENT 4 +#endif + +/** + * The size of the lwIP heap memory. + * + * If the application will send a lot of data that needs to be copied, this + * should be set high. + * + * $WIZ$ type = "int"; min = 1600 + */ +#define MEM_SIZE 1600 + +/** + * Dynamic pool memory overflow protection check level. + * + * MEMP_OVERFLOW_CHECK == 0 no checking + * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed + * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time + * memp_malloc() or memp_free() is called (useful but slow!) + * + * $WIZ$ type = "int"; min = "0"; max = "2" + */ +#define MEMP_OVERFLOW_CHECK 0 + +/** + * Run a sanity check after each memp_free(). + * + * $WIZ$ type = "boolean" + */ +#define MEMP_SANITY_CHECK 0 + +/** + * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set + * of memory pools of various sizes. When mem_malloc is called, an element of + * the smallest pool that can provide the length needed is returned. + * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled. + */ +#ifndef MEM_USE_POOLS +#define MEM_USE_POOLS 0 +#endif + +/** + * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next + * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more + * reliable. */ +#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL +#define MEM_USE_POOLS_TRY_BIGGER_POOL 0 +#endif + +/** + * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h + * that defines additional pools beyond the "standard" ones required + * by lwIP. If you set this to 1, you must have lwippools.h in your + * inlude path somewhere. + */ +#ifndef MEMP_USE_CUSTOM_POOLS +#define MEMP_USE_CUSTOM_POOLS 0 +#endif + +/** + * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from + * interrupt context (or another context that doesn't allow waiting for a + * semaphore). + * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT, + * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs + * with each loop so that mem_free can run. + * + * ATTENTION: As you can see from the above description, this leads to dis-/ + * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc + * can need longer. + * + * If you don't want that, at least for NO_SYS=0, you can still use the following + * functions to enqueue a deallocation call which then runs in the tcpip_thread + * context: + * - pbuf_free_callback(p); + * - mem_free_callback(m); + */ +#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT +#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0 +#endif + +/* + ------------------------------------------------ + ---------- Internal Memory Pool Sizes ---------- + ------------------------------------------------ +*/ +/** + * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). + * If the application sends a lot of data out of ROM (or other static memory), + * this should be set high. + */ +#ifndef MEMP_NUM_PBUF +#define MEMP_NUM_PBUF 16 +#endif + +/** + * MEMP_NUM_RAW_PCB: Number of raw connection PCBs + * (requires the LWIP_RAW option) + */ +#ifndef MEMP_NUM_RAW_PCB +#define MEMP_NUM_RAW_PCB 4 +#endif + +/** + * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One + * per active UDP "connection". + * (requires the LWIP_UDP option) + */ +#ifndef MEMP_NUM_UDP_PCB +#define MEMP_NUM_UDP_PCB 4 +#endif + +/** + * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. + * (requires the LWIP_TCP option) + */ +#ifndef MEMP_NUM_TCP_PCB +#define MEMP_NUM_TCP_PCB 5 +#endif + +/** + * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. + * (requires the LWIP_TCP option) + */ +#ifndef MEMP_NUM_TCP_PCB_LISTEN +#define MEMP_NUM_TCP_PCB_LISTEN 8 +#endif + +/** + * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. + * (requires the LWIP_TCP option) + */ +#ifndef MEMP_NUM_TCP_SEG +#define MEMP_NUM_TCP_SEG 16 +#endif + +/** + * MEMP_NUM_REASSDATA: the number of simultaneously IP packets queued for + * reassembly (whole packets, not fragments!) + */ +#ifndef MEMP_NUM_REASSDATA +#define MEMP_NUM_REASSDATA 5 +#endif + +/** + * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing + * packets (pbufs) that are waiting for an ARP request (to resolve + * their destination address) to finish. + * (requires the ARP_QUEUEING option) + */ +#ifndef MEMP_NUM_ARP_QUEUE +#define MEMP_NUM_ARP_QUEUE 30 +#endif + +/** + * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces + * can be members et the same time (one per netif - allsystems group -, plus one + * per netif membership). + * (requires the LWIP_IGMP option) + */ +#ifndef MEMP_NUM_IGMP_GROUP +#define MEMP_NUM_IGMP_GROUP 8 +#endif + +/** + * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. + * (requires NO_SYS==0) + */ +#ifndef MEMP_NUM_SYS_TIMEOUT +#define MEMP_NUM_SYS_TIMEOUT 8 +#endif + +/** + * MEMP_NUM_NETBUF: the number of struct netbufs. + * (only needed if you use the sequential API, like api_lib.c) + */ +#ifndef MEMP_NUM_NETBUF +#define MEMP_NUM_NETBUF 2 +#endif + +/** + * MEMP_NUM_NETCONN: the number of struct netconns. + * (only needed if you use the sequential API, like api_lib.c) + */ +#ifndef MEMP_NUM_NETCONN +#define MEMP_NUM_NETCONN 4 +#endif + +/** + * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used + * for callback/timeout API communication. + * (only needed if you use tcpip.c) + */ +#ifndef MEMP_NUM_TCPIP_MSG_API +#define MEMP_NUM_TCPIP_MSG_API 8 +#endif + +/** + * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used + * for incoming packets. + * (only needed if you use tcpip.c) + */ +#ifndef MEMP_NUM_TCPIP_MSG_INPKT +#define MEMP_NUM_TCPIP_MSG_INPKT 8 +#endif + +/** + * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. + */ +#ifndef PBUF_POOL_SIZE +#define PBUF_POOL_SIZE 16 +#endif + +/* + --------------------------------- + ---------- ARP options ---------- + --------------------------------- +*/ +/** + * LWIP_ARP==1: Enable ARP functionality. + */ +#ifndef LWIP_ARP +#define LWIP_ARP 1 +#endif + +/** + * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached. + */ +#ifndef ARP_TABLE_SIZE +#define ARP_TABLE_SIZE 10 +#endif + +/** + * ARP_QUEUEING==1: Outgoing packets are queued during hardware address + * resolution. + */ +#ifndef ARP_QUEUEING +#define ARP_QUEUEING 1 +#endif + +/** + * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be + * updated with the source MAC and IP addresses supplied in the packet. + * You may want to disable this if you do not trust LAN peers to have the + * correct addresses, or as a limited approach to attempt to handle + * spoofing. If disabled, lwIP will need to make a new ARP request if + * the peer is not already in the ARP table, adding a little latency. + */ +#ifndef ETHARP_TRUST_IP_MAC +#define ETHARP_TRUST_IP_MAC 1 +#endif + +/** + * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header. + * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check. + * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted. + * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted. + */ +#ifndef ETHARP_SUPPORT_VLAN +#define ETHARP_SUPPORT_VLAN 0 +#endif + +/* + -------------------------------- + ---------- IP options ---------- + -------------------------------- +*/ +/** + * IP_FORWARD==1: Enables the ability to forward IP packets across network + * interfaces. If you are going to run lwIP on a device with only one network + * interface, define this to 0. + */ +#ifndef IP_FORWARD +#define IP_FORWARD 0 +#endif + +/** + * IP_OPTIONS_ALLOWED: Defines the behavior for IP options. + * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped. + * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed). + */ +#ifndef IP_OPTIONS_ALLOWED +#define IP_OPTIONS_ALLOWED 1 +#endif + +/** + * Reassemble incoming fragmented IP packets. + * + * $WIZ$ type = "boolean" + */ +#define IP_REASSEMBLY 1 + +/** + * Fragment outgoing IP packets if their size exceeds MTU. + * + * $WIZ$ type = "boolean" + */ +#define IP_FRAG 1 + +/** + * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) + * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived + * in this time, the whole packet is discarded. + */ +#ifndef IP_REASS_MAXAGE +#define IP_REASS_MAXAGE 3 +#endif + +/** + * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. + * Since the received pbufs are enqueued, be sure to configure + * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive + * packets even if the maximum amount of fragments is enqueued for reassembly! + */ +#ifndef IP_REASS_MAX_PBUFS +#define IP_REASS_MAX_PBUFS 10 +#endif + +/** + * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP + * fragmentation. Otherwise pbufs are allocated and reference the original + * packet data to be fragmented. + */ +#ifndef IP_FRAG_USES_STATIC_BUF +#define IP_FRAG_USES_STATIC_BUF 1 +#endif + +/** + * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer + * (requires IP_FRAG_USES_STATIC_BUF==1) + */ +#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU) +#define IP_FRAG_MAX_MTU 1500 +#endif + +/** + * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. + */ +#ifndef IP_DEFAULT_TTL +#define IP_DEFAULT_TTL 255 +#endif + +/** + * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast + * filter per pcb on udp and raw send operations. To enable broadcast filter + * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1. + */ +#ifndef IP_SOF_BROADCAST +#define IP_SOF_BROADCAST 0 +#endif + +/** + * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast + * filter on recv operations. + */ +#ifndef IP_SOF_BROADCAST_RECV +#define IP_SOF_BROADCAST_RECV 0 +#endif + +/* + ---------------------------------- + ---------- ICMP options ---------- + ---------------------------------- +*/ +/** + * Enable ICMP module inside the IP stack. + * + * $WIZ$ type = "boolean" + */ +#define LWIP_ICMP 1 + +/** + * ICMP_TTL: Default value for Time-To-Live used by ICMP packets. + */ +#ifndef ICMP_TTL +#define ICMP_TTL (IP_DEFAULT_TTL) +#endif + +/** + * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only) + */ +#ifndef LWIP_BROADCAST_PING +#define LWIP_BROADCAST_PING 0 +#endif + +/** + * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only) + */ +#ifndef LWIP_MULTICAST_PING +#define LWIP_MULTICAST_PING 0 +#endif + +/* + --------------------------------- + ---------- RAW options ---------- + --------------------------------- +*/ +/** + * Enable application layer to hook into the IP layer itself. + * + * $WIZ$ type = "boolean" + */ +#define LWIP_RAW 1 + +/** + * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. + */ +#ifndef RAW_TTL +#define RAW_TTL (IP_DEFAULT_TTL) +#endif + +/* + ---------------------------------- + ---------- DHCP options ---------- + ---------------------------------- +*/ +/** + * Enable DHCP module. UDP must be also available. + * + * $WIZ$ type = "boolean" + */ +#define LWIP_DHCP 1 + +/** + * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address. + */ +#ifndef DHCP_DOES_ARP_CHECK +#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP)) +#endif + +/* + ------------------------------------ + ---------- AUTOIP options ---------- + ------------------------------------ +*/ +/** + * LWIP_AUTOIP==1: Enable AUTOIP module. + */ +#ifndef LWIP_AUTOIP +#define LWIP_AUTOIP 0 +#endif + +/** + * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on + * the same interface at the same time. + */ +#ifndef LWIP_DHCP_AUTOIP_COOP +#define LWIP_DHCP_AUTOIP_COOP 0 +#endif + +/** + * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes + * that should be sent before falling back on AUTOIP. This can be set + * as low as 1 to get an AutoIP address very quickly, but you should + * be prepared to handle a changing IP address when DHCP overrides + * AutoIP. + */ +#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES +#define LWIP_DHCP_AUTOIP_COOP_TRIES 9 +#endif + +/* + ---------------------------------- + ---------- SNMP options ---------- + ---------------------------------- +*/ +/** + * Turn on SNMP module. UDP must be also available. + * + * $WIZ$ type = "boolean" + */ +#define LWIP_SNMP 0 + +/** + * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will + * allow. At least one request buffer is required. + */ +#ifndef SNMP_CONCURRENT_REQUESTS +#define SNMP_CONCURRENT_REQUESTS 1 +#endif + +/** + * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap + * destination is required + */ +#ifndef SNMP_TRAP_DESTINATIONS +#define SNMP_TRAP_DESTINATIONS 1 +#endif + +/** + * SNMP_PRIVATE_MIB: + */ +#ifndef SNMP_PRIVATE_MIB +#define SNMP_PRIVATE_MIB 0 +#endif + +/** + * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not + * a safe action and disabled when SNMP_SAFE_REQUESTS = 1). + * Unsafe requests are disabled by default! + */ +#ifndef SNMP_SAFE_REQUESTS +#define SNMP_SAFE_REQUESTS 1 +#endif + +/* + ---------------------------------- + ---------- IGMP options ---------- + ---------------------------------- +*/ +/** + * Turn on IGMP module. + * + * $WIZ$ type = "boolean" + */ +#define LWIP_IGMP 0 + +/* + ---------------------------------- + ---------- DNS options ----------- + ---------------------------------- +*/ +/** + * Turn on DNS module. UDP must be available for DNS transport. + * + * $WIZ$ type = "boolean" + */ +#define LWIP_DNS 0 + +/** DNS maximum number of entries to maintain locally. */ +#ifndef DNS_TABLE_SIZE +#define DNS_TABLE_SIZE 4 +#endif + +/** DNS maximum host name length supported in the name table. */ +#ifndef DNS_MAX_NAME_LENGTH +#define DNS_MAX_NAME_LENGTH 256 +#endif + +/** The maximum of DNS servers */ +#ifndef DNS_MAX_SERVERS +#define DNS_MAX_SERVERS 2 +#endif + +/** DNS do a name checking between the query and the response. */ +#ifndef DNS_DOES_NAME_CHECK +#define DNS_DOES_NAME_CHECK 1 +#endif + +/** DNS use a local buffer if DNS_USES_STATIC_BUF=0, a static one if + DNS_USES_STATIC_BUF=1, or a dynamic one if DNS_USES_STATIC_BUF=2. + The buffer will be of size DNS_MSG_SIZE */ +#ifndef DNS_USES_STATIC_BUF +#define DNS_USES_STATIC_BUF 1 +#endif + +/** DNS message max. size. Default value is RFC compliant. */ +#ifndef DNS_MSG_SIZE +#define DNS_MSG_SIZE 512 +#endif + +/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled, + * you have to define + * \code + * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}} + * \endcode + * (an array of structs name/address, where address is an u32_t in network + * byte order). + * + * Instead, you can also use an external function: + * \code + * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name) + * \endcode + * that returns the IP address or INADDR_NONE if not found. + */ +#ifndef DNS_LOCAL_HOSTLIST +#define DNS_LOCAL_HOSTLIST 0 +#endif /* DNS_LOCAL_HOSTLIST */ + +/** If this is turned on, the local host-list can be dynamically changed + * at runtime. */ +#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC +#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0 +#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */ + +/* + --------------------------------- + ---------- UDP options ---------- + --------------------------------- +*/ +/** + * Turn on UDP. + * + * $WIZ$ type = "boolean" + */ +#define LWIP_UDP 1 + +/** + * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP) + */ +#ifndef LWIP_UDPLITE +#define LWIP_UDPLITE 0 +#endif + +/** + * UDP_TTL: Default Time-To-Live value. + */ +#ifndef UDP_TTL +#define UDP_TTL (IP_DEFAULT_TTL) +#endif + +/** + * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf. + */ +#ifndef LWIP_NETBUF_RECVINFO +#define LWIP_NETBUF_RECVINFO 0 +#endif + +/* + --------------------------------- + ---------- TCP options ---------- + --------------------------------- +*/ +/** + * Turn on TCP. + * + * $WIZ$ type = "boolean" + */ +#define LWIP_TCP 1 + +/** + * TCP_TTL: Default Time-To-Live value. + */ +#ifndef TCP_TTL +#define TCP_TTL (IP_DEFAULT_TTL) +#endif + +/** + * TCP_WND: The size of a TCP window. This must be at least + * (2 * TCP_MSS) for things to work well + */ +#ifndef TCP_WND +#define TCP_WND (4 * TCP_MSS) +#endif + +/** + * TCP_MAXRTX: Maximum number of retransmissions of data segments. + */ +#ifndef TCP_MAXRTX +#define TCP_MAXRTX 12 +#endif + +/** + * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments. + */ +#ifndef TCP_SYNMAXRTX +#define TCP_SYNMAXRTX 6 +#endif + +/** + * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order. + * Define to 0 if your device is low on memory. + */ +#ifndef TCP_QUEUE_OOSEQ +#define TCP_QUEUE_OOSEQ (LWIP_TCP) +#endif + +/** + * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default, + * you might want to increase this.) + * For the receive side, this MSS is advertised to the remote side + * when opening a connection. For the transmit size, this MSS sets + * an upper limit on the MSS advertised by the remote host. + */ +#ifndef TCP_MSS +#define TCP_MSS 536 +#endif + +/** + * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really + * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which + * reflects the available reassembly buffer size at the remote host) and the + * largest size permitted by the IP layer" (RFC 1122) + * Setting this to 1 enables code that checks TCP_MSS against the MTU of the + * netif used for a connection and limits the MSS if it would be too big otherwise. + */ +#ifndef TCP_CALCULATE_EFF_SEND_MSS +#define TCP_CALCULATE_EFF_SEND_MSS 1 +#endif + + +/** + * TCP_SND_BUF: TCP sender buffer space (bytes). + */ +#ifndef TCP_SND_BUF +#define TCP_SND_BUF (2 * TCP_MSS) +#endif + +/** + * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least + * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. + */ +#ifndef TCP_SND_QUEUELEN +#define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF)/(TCP_MSS)) +#endif + +/** + * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than or equal + * to TCP_SND_BUF. It is the amount of space which must be available in the + * TCP snd_buf for select to return writable. + */ +#ifndef TCP_SNDLOWAT +#define TCP_SNDLOWAT ((TCP_SND_BUF)/2) +#endif + +/** + * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb. + */ +#ifndef TCP_LISTEN_BACKLOG +#define TCP_LISTEN_BACKLOG 0 +#endif + +/** + * The maximum allowed backlog for TCP listen netconns. + * This backlog is used unless another is explicitly specified. + * 0xff is the maximum (u8_t). + */ +#ifndef TCP_DEFAULT_LISTEN_BACKLOG +#define TCP_DEFAULT_LISTEN_BACKLOG 0xff +#endif + +/** + * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option. + */ +#ifndef LWIP_TCP_TIMESTAMPS +#define LWIP_TCP_TIMESTAMPS 0 +#endif + +/** + * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an + * explicit window update + */ +#ifndef TCP_WND_UPDATE_THRESHOLD +#define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4) +#endif + +/* + ---------------------------------- + ---------- Pbuf options ---------- + ---------------------------------- +*/ +/** + * PBUF_LINK_HLEN: the number of bytes that should be allocated for a + * link level header. The default is 14, the standard value for + * Ethernet. + */ +#ifndef PBUF_LINK_HLEN +#define PBUF_LINK_HLEN 14 +#endif + +/** + * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is + * designed to accomodate single full size TCP frame in one pbuf, including + * TCP_MSS, IP header, and link header. + */ +#ifndef PBUF_POOL_BUFSIZE +#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) +#endif + +/* + ------------------------------------------------ + ---------- Network Interfaces options ---------- + ------------------------------------------------ +*/ +/** + * Use DHCP_OPTION_HOSTNAME with netif's hostname field. + * + * $WIZ$ type = "boolean" + */ +#define LWIP_NETIF_HOSTNAME 1 + +/** + * Support netif api (in netifapi.c) + * + * $WIZ$ type = "boolean" + */ +#define LWIP_NETIF_API 0 + +/** + * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface + * changes its up/down status (i.e., due to DHCP IP acquistion) + */ +#ifndef LWIP_NETIF_STATUS_CALLBACK +#define LWIP_NETIF_STATUS_CALLBACK 0 +#endif + +/** + * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface + * whenever the link changes (i.e., link down) + */ +#ifndef LWIP_NETIF_LINK_CALLBACK +#define LWIP_NETIF_LINK_CALLBACK 0 +#endif + +/** + * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table + * indices) in struct netif. TCP and UDP can make use of this to prevent + * scanning the ARP table for every sent packet. While this is faster for big + * ARP tables or many concurrent connections, it might be counterproductive + * if you have a tiny ARP table or if there never are concurrent connections. + */ +#ifndef LWIP_NETIF_HWADDRHINT +#define LWIP_NETIF_HWADDRHINT 0 +#endif + +/** + * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP + * address equal to the netif IP address, looping them back up the stack. + */ +#ifndef LWIP_NETIF_LOOPBACK +#define LWIP_NETIF_LOOPBACK 0 +#endif + +/** + * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback + * sending for each netif (0 = disabled) + */ +#ifndef LWIP_LOOPBACK_MAX_PBUFS +#define LWIP_LOOPBACK_MAX_PBUFS 0 +#endif + +/** + * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in + * the system, as netifs must change how they behave depending on this setting + * for the LWIP_NETIF_LOOPBACK option to work. + * Setting this is needed to avoid reentering non-reentrant functions like + * tcp_input(). + * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a + * multithreaded environment like tcpip.c. In this case, netif->input() + * is called directly. + * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup. + * The packets are put on a list and netif_poll() must be called in + * the main application loop. + */ +#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING +#define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS) +#endif + +/** + * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data + * to be sent into one single pbuf. This is for compatibility with DMA-enabled + * MACs that do not support scatter-gather. + * Beware that this might involve CPU-memcpy before transmitting that would not + * be needed without this flag! Use this only if you need to! + * + * @todo: TCP and IP-frag do not work with this, yet: + */ +#ifndef LWIP_NETIF_TX_SINGLE_PBUF +#define LWIP_NETIF_TX_SINGLE_PBUF 0 +#endif /* LWIP_NETIF_TX_SINGLE_PBUF */ + +/* + ------------------------------------ + ---------- LOOPIF options ---------- + ------------------------------------ +*/ +/** + * Support loop interface (127.0.0.1) and loopif.c + * + * $WIZ$ type = "boolean" + */ +#define LWIP_HAVE_LOOPIF 0 + +/* + ------------------------------------ + ---------- SLIPIF options ---------- + ------------------------------------ +*/ +/** + * Support slip interface and slipif.c + * + * $WIZ$ type = "boolean" + */ +#define LWIP_HAVE_SLIPIF 0 + +/* + ------------------------------------ + ---------- Thread options ---------- + ------------------------------------ +*/ +/** + * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread. + */ +#ifndef TCPIP_THREAD_NAME +#define TCPIP_THREAD_NAME "tcpip_thread" +#endif + +/** + * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread. + * The stack size value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef TCPIP_THREAD_STACKSIZE +#define TCPIP_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3) +#endif + +/** + * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread. + * The priority value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef TCPIP_THREAD_PRIO +#define TCPIP_THREAD_PRIO 0 +#endif + +/** + * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages + * The queue size value itself is platform-dependent, but is passed to + * sys_mbox_new() when tcpip_init is called. + */ +#ifndef TCPIP_MBOX_SIZE +#define TCPIP_MBOX_SIZE 0 +#endif + +/** + * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread. + */ +#ifndef SLIPIF_THREAD_NAME +#define SLIPIF_THREAD_NAME "slipif_loop" +#endif + +/** + * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread. + * The stack size value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef SLIPIF_THREAD_STACKSIZE +#define SLIPIF_THREAD_STACKSIZE 0 +#endif + +/** + * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread. + * The priority value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef SLIPIF_THREAD_PRIO +#define SLIPIF_THREAD_PRIO 1 +#endif + +/** + * PPP_THREAD_NAME: The name assigned to the pppMain thread. + */ +#ifndef PPP_THREAD_NAME +#define PPP_THREAD_NAME "pppMain" +#endif + +/** + * PPP_THREAD_STACKSIZE: The stack size used by the pppMain thread. + * The stack size value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef PPP_THREAD_STACKSIZE +#define PPP_THREAD_STACKSIZE 0 +#endif + +/** + * PPP_THREAD_PRIO: The priority assigned to the pppMain thread. + * The priority value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef PPP_THREAD_PRIO +#define PPP_THREAD_PRIO 1 +#endif + +/** + * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread. + */ +#ifndef DEFAULT_THREAD_NAME +#define DEFAULT_THREAD_NAME "lwIP" +#endif + +/** + * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread. + * The stack size value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef DEFAULT_THREAD_STACKSIZE +#define DEFAULT_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3) +#endif + +/** + * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread. + * The priority value itself is platform-dependent, but is passed to + * sys_thread_new() when the thread is created. + */ +#ifndef DEFAULT_THREAD_PRIO +#define DEFAULT_THREAD_PRIO 1 +#endif + +/** + * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a + * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed + * to sys_mbox_new() when the recvmbox is created. + */ +#ifndef DEFAULT_RAW_RECVMBOX_SIZE +#define DEFAULT_RAW_RECVMBOX_SIZE 0 +#endif + +/** + * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a + * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed + * to sys_mbox_new() when the recvmbox is created. + */ +#ifndef DEFAULT_UDP_RECVMBOX_SIZE +#define DEFAULT_UDP_RECVMBOX_SIZE 0 +#endif + +/** + * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a + * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed + * to sys_mbox_new() when the recvmbox is created. + */ +#ifndef DEFAULT_TCP_RECVMBOX_SIZE +#define DEFAULT_TCP_RECVMBOX_SIZE 0 +#endif + +/** + * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections. + * The queue size value itself is platform-dependent, but is passed to + * sys_mbox_new() when the acceptmbox is created. + */ +#ifndef DEFAULT_ACCEPTMBOX_SIZE +#define DEFAULT_ACCEPTMBOX_SIZE 0 +#endif + +/* + ---------------------------------------------- + ---------- Sequential layer options ---------- + ---------------------------------------------- +*/ +/** + * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!) + * Don't use it if you're not an active lwIP project member + */ +#ifndef LWIP_TCPIP_CORE_LOCKING +#define LWIP_TCPIP_CORE_LOCKING 0 +#endif + +/** + * Enable Netconn API (require to use api_lib.c) + * + * $WIZ$ type = "boolean" + */ +#define LWIP_NETCONN 1 + +/* + ------------------------------------ + ---------- Socket options ---------- + ------------------------------------ +*/ +/** + * Enable Socket API (require to use sockets.c) + * + * $WIZ$ type = "boolean" + */ +#define LWIP_SOCKET 1 + +/** + * Enable BSD-style sockets functions names. + * + * NOTE: do not change this!!! + */ +#ifndef LWIP_COMPAT_SOCKETS +#define LWIP_COMPAT_SOCKETS 0 +#endif + +/** + * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names. + * Disable this option if you use a POSIX operating system that uses the same + * names (read, write & close). (only used if you use sockets.c) + */ +#ifndef LWIP_POSIX_SOCKETS_IO_NAMES +#define LWIP_POSIX_SOCKETS_IO_NAMES 0 +#endif + +/** + * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT + * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set + * in seconds. (does not require sockets.c, and will affect tcp.c) + */ +#ifndef LWIP_TCP_KEEPALIVE +#define LWIP_TCP_KEEPALIVE 0 +#endif + +/** + * LWIP_SO_RCVTIMEO==1: Enable SO_RCVTIMEO processing. + */ +#ifndef LWIP_SO_RCVTIMEO +#define LWIP_SO_RCVTIMEO 0 +#endif + +/** + * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing. + */ +#ifndef LWIP_SO_RCVBUF +#define LWIP_SO_RCVBUF 0 +#endif + +/** + * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize. + */ +#ifndef RECV_BUFSIZE_DEFAULT +#define RECV_BUFSIZE_DEFAULT INT_MAX +#endif + +/** + * SO_REUSE==1: Enable SO_REUSEADDR and SO_REUSEPORT options. DO NOT USE! + */ +#ifndef SO_REUSE +#define SO_REUSE 0 +#endif + +/* + ---------------------------------------- + ---------- Statistics options ---------- + ---------------------------------------- +*/ +/** + * LWIP_STATS==1: Enable statistics collection in lwip_stats. + */ +#ifndef LWIP_STATS +#define LWIP_STATS 0 +#endif + +#if LWIP_STATS + +/** + * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions. + */ +#ifndef LWIP_STATS_DISPLAY +#define LWIP_STATS_DISPLAY 0 +#endif + +/** + * LINK_STATS==1: Enable link stats. + */ +#ifndef LINK_STATS +#define LINK_STATS 1 +#endif + +/** + * ETHARP_STATS==1: Enable etharp stats. + */ +#ifndef ETHARP_STATS +#define ETHARP_STATS (LWIP_ARP) +#endif + +/** + * IP_STATS==1: Enable IP stats. + */ +#ifndef IP_STATS +#define IP_STATS 1 +#endif + +/** + * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is + * on if using either frag or reass. + */ +#ifndef IPFRAG_STATS +#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG) +#endif + +/** + * ICMP_STATS==1: Enable ICMP stats. + */ +#ifndef ICMP_STATS +#define ICMP_STATS 1 +#endif + +/** + * IGMP_STATS==1: Enable IGMP stats. + */ +#ifndef IGMP_STATS +#define IGMP_STATS (LWIP_IGMP) +#endif + +/** + * UDP_STATS==1: Enable UDP stats. Default is on if + * UDP enabled, otherwise off. + */ +#ifndef UDP_STATS +#define UDP_STATS (LWIP_UDP) +#endif + +/** + * TCP_STATS==1: Enable TCP stats. Default is on if TCP + * enabled, otherwise off. + */ +#ifndef TCP_STATS +#define TCP_STATS (LWIP_TCP) +#endif + +/** + * MEM_STATS==1: Enable mem.c stats. + */ +#ifndef MEM_STATS +#define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0)) +#endif + +/** + * MEMP_STATS==1: Enable memp.c pool stats. + */ +#ifndef MEMP_STATS +#define MEMP_STATS (MEMP_MEM_MALLOC == 0) +#endif + +/** + * SYS_STATS==1: Enable system stats (sem and mbox counts, etc). + */ +#ifndef SYS_STATS +#define SYS_STATS (NO_SYS == 0) +#endif + +#else + +#define LINK_STATS 0 +#define ETHARP_STATS 0 +#define IP_STATS 0 +#define IPFRAG_STATS 0 +#define ICMP_STATS 0 +#define IGMP_STATS 0 +#define UDP_STATS 0 +#define TCP_STATS 0 +#define MEM_STATS 0 +#define MEMP_STATS 0 +#define SYS_STATS 0 +#define LWIP_STATS_DISPLAY 0 + +#endif /* LWIP_STATS */ + +/* + --------------------------------- + ---------- PPP options ---------- + --------------------------------- +*/ +/** + * Enable PPP. + * + * $WIZ$ type = "boolean" + */ +#define PPP_SUPPORT 0 + +/** + * Enable PPP Over Ethernet. + * + * $WIZ$ type = "boolean" + */ +#define PPPOE_SUPPORT 0 + +/** + * PPPOS_SUPPORT==1: Enable PPP Over Serial + */ +#ifndef PPPOS_SUPPORT +#define PPPOS_SUPPORT PPP_SUPPORT +#endif + +#if PPP_SUPPORT + +/** + * NUM_PPP: Max PPP sessions. + */ +#ifndef NUM_PPP +#define NUM_PPP 1 +#endif + +/** + * PAP_SUPPORT==1: Support PAP. + */ +#ifndef PAP_SUPPORT +#define PAP_SUPPORT 0 +#endif + +/** + * CHAP_SUPPORT==1: Support CHAP. + */ +#ifndef CHAP_SUPPORT +#define CHAP_SUPPORT 0 +#endif + +/** + * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET! + */ +#ifndef MSCHAP_SUPPORT +#define MSCHAP_SUPPORT 0 +#endif + +/** + * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET! + */ +#ifndef CBCP_SUPPORT +#define CBCP_SUPPORT 0 +#endif + +/** + * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET! + */ +#ifndef CCP_SUPPORT +#define CCP_SUPPORT 0 +#endif + +/** + * VJ_SUPPORT==1: Support VJ header compression. + */ +#ifndef VJ_SUPPORT +#define VJ_SUPPORT 0 +#endif + +/** + * MD5_SUPPORT==1: Support MD5 (see also CHAP). + */ +#ifndef MD5_SUPPORT +#define MD5_SUPPORT 0 +#endif + +/* + * Timeouts + */ +#ifndef FSM_DEFTIMEOUT +#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */ +#endif + +#ifndef FSM_DEFMAXTERMREQS +#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */ +#endif + +#ifndef FSM_DEFMAXCONFREQS +#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */ +#endif + +#ifndef FSM_DEFMAXNAKLOOPS +#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */ +#endif + +#ifndef UPAP_DEFTIMEOUT +#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */ +#endif + +#ifndef UPAP_DEFREQTIME +#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */ +#endif + +#ifndef CHAP_DEFTIMEOUT +#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */ +#endif + +#ifndef CHAP_DEFTRANSMITS +#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */ +#endif + +/* Interval in seconds between keepalive echo requests, 0 to disable. */ +#ifndef LCP_ECHOINTERVAL +#define LCP_ECHOINTERVAL 0 +#endif + +/* Number of unanswered echo requests before failure. */ +#ifndef LCP_MAXECHOFAILS +#define LCP_MAXECHOFAILS 3 +#endif + +/* Max Xmit idle time (in jiffies) before resend flag char. */ +#ifndef PPP_MAXIDLEFLAG +#define PPP_MAXIDLEFLAG 100 +#endif + +/* + * Packet sizes + * + * Note - lcp shouldn't be allowed to negotiate stuff outside these + * limits. See lcp.h in the pppd directory. + * (XXX - these constants should simply be shared by lcp.c instead + * of living in lcp.h) + */ +#define PPP_MTU 1500 /* Default MTU (size of Info field) */ +#ifndef PPP_MAXMTU +/* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */ +#define PPP_MAXMTU 1500 /* Largest MTU we allow */ +#endif +#define PPP_MINMTU 64 +#define PPP_MRU 1500 /* default MRU = max length of info field */ +#define PPP_MAXMRU 1500 /* Largest MRU we allow */ +#ifndef PPP_DEFMRU +#define PPP_DEFMRU 296 /* Try for this */ +#endif +#define PPP_MINMRU 128 /* No MRUs below this */ + +#ifndef MAXNAMELEN +#define MAXNAMELEN 256 /* max length of hostname or name for auth */ +#endif +#ifndef MAXSECRETLEN +#define MAXSECRETLEN 256 /* max length of password or secret */ +#endif + +#endif /* PPP_SUPPORT */ + +/* + -------------------------------------- + ---------- Checksum options ---------- + -------------------------------------- +*/ +/** + * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets. + */ +#ifndef CHECKSUM_GEN_IP +#define CHECKSUM_GEN_IP 1 +#endif + +/** + * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets. + */ +#ifndef CHECKSUM_GEN_UDP +#define CHECKSUM_GEN_UDP 1 +#endif + +/** + * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets. + */ +#ifndef CHECKSUM_GEN_TCP +#define CHECKSUM_GEN_TCP 1 +#endif + +/** + * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets. + */ +#ifndef CHECKSUM_CHECK_IP +#define CHECKSUM_CHECK_IP 1 +#endif + +/** + * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets. + */ +#ifndef CHECKSUM_CHECK_UDP +#define CHECKSUM_CHECK_UDP 1 +#endif + +/** + * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets. + */ +#ifndef CHECKSUM_CHECK_TCP +#define CHECKSUM_CHECK_TCP 1 +#endif + +/* + --------------------------------------- + ---------- Debugging options ---------- + --------------------------------------- +*/ + +#ifdef _DEBUG +#define LWIP_DEBUG +#endif + +/** + * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is + * compared against this value. If it is smaller, then debugging + * messages are written. + */ +#ifndef LWIP_DBG_MIN_LEVEL +#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL +#endif + +/** + * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable + * debug messages of certain types. + */ +#ifndef LWIP_DBG_TYPES_ON +#define LWIP_DBG_TYPES_ON LWIP_DBG_ON +#endif + +/** + * ETHARP_DEBUG: Enable debugging in etharp.c. + */ +#ifndef ETHARP_DEBUG +#define ETHARP_DEBUG LWIP_DBG_OFF +#endif + +/** + * NETIF_DEBUG: Enable debugging in netif.c. + */ +#ifndef NETIF_DEBUG +#define NETIF_DEBUG LWIP_DBG_OFF +#endif + +/** + * PBUF_DEBUG: Enable debugging in pbuf.c. + */ +#ifndef PBUF_DEBUG +#define PBUF_DEBUG LWIP_DBG_OFF +#endif + +/** + * API_LIB_DEBUG: Enable debugging in api_lib.c. + */ +#ifndef API_LIB_DEBUG +#define API_LIB_DEBUG LWIP_DBG_OFF +#endif + +/** + * API_MSG_DEBUG: Enable debugging in api_msg.c. + */ +#ifndef API_MSG_DEBUG +#define API_MSG_DEBUG LWIP_DBG_OFF +#endif + +/** + * SOCKETS_DEBUG: Enable debugging in sockets.c. + */ +#ifndef SOCKETS_DEBUG +#define SOCKETS_DEBUG LWIP_DBG_OFF +#endif + +/** + * ICMP_DEBUG: Enable debugging in icmp.c. + */ +#ifndef ICMP_DEBUG +#define ICMP_DEBUG LWIP_DBG_OFF +#endif + +/** + * IGMP_DEBUG: Enable debugging in igmp.c. + */ +#ifndef IGMP_DEBUG +#define IGMP_DEBUG LWIP_DBG_OFF +#endif + +/** + * INET_DEBUG: Enable debugging in inet.c. + */ +#ifndef INET_DEBUG +#define INET_DEBUG LWIP_DBG_OFF +#endif + +/** + * IP_DEBUG: Enable debugging for IP. + */ +#ifndef IP_DEBUG +#define IP_DEBUG LWIP_DBG_OFF +#endif + +/** + * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass. + */ +#ifndef IP_REASS_DEBUG +#define IP_REASS_DEBUG LWIP_DBG_OFF +#endif + +/** + * RAW_DEBUG: Enable debugging in raw.c. + */ +#ifndef RAW_DEBUG +#define RAW_DEBUG LWIP_DBG_OFF +#endif + +/** + * MEM_DEBUG: Enable debugging in mem.c. + */ +#ifndef MEM_DEBUG +#define MEM_DEBUG LWIP_DBG_OFF +#endif + +/** + * MEMP_DEBUG: Enable debugging in memp.c. + */ +#ifndef MEMP_DEBUG +#define MEMP_DEBUG LWIP_DBG_OFF +#endif + +/** + * SYS_DEBUG: Enable debugging in sys.c. + */ +#ifndef SYS_DEBUG +#define SYS_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_DEBUG: Enable debugging for TCP. + */ +#ifndef TCP_DEBUG +#define TCP_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug. + */ +#ifndef TCP_INPUT_DEBUG +#define TCP_INPUT_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit. + */ +#ifndef TCP_FR_DEBUG +#define TCP_FR_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit + * timeout. + */ +#ifndef TCP_RTO_DEBUG +#define TCP_RTO_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_CWND_DEBUG: Enable debugging for TCP congestion window. + */ +#ifndef TCP_CWND_DEBUG +#define TCP_CWND_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating. + */ +#ifndef TCP_WND_DEBUG +#define TCP_WND_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions. + */ +#ifndef TCP_OUTPUT_DEBUG +#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_RST_DEBUG: Enable debugging for TCP with the RST message. + */ +#ifndef TCP_RST_DEBUG +#define TCP_RST_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths. + */ +#ifndef TCP_QLEN_DEBUG +#define TCP_QLEN_DEBUG LWIP_DBG_OFF +#endif + +/** + * UDP_DEBUG: Enable debugging in UDP. + */ +#ifndef UDP_DEBUG +#define UDP_DEBUG LWIP_DBG_OFF +#endif + +/** + * TCPIP_DEBUG: Enable debugging in tcpip.c. + */ +#ifndef TCPIP_DEBUG +#define TCPIP_DEBUG LWIP_DBG_OFF +#endif + +/** + * PPP_DEBUG: Enable debugging for PPP. + */ +#ifndef PPP_DEBUG +#define PPP_DEBUG LWIP_DBG_OFF +#endif + +/** + * SLIP_DEBUG: Enable debugging in slipif.c. + */ +#ifndef SLIP_DEBUG +#define SLIP_DEBUG LWIP_DBG_OFF +#endif + +/** + * DHCP_DEBUG: Enable debugging in dhcp.c. + */ +#ifndef DHCP_DEBUG +#define DHCP_DEBUG LWIP_DBG_OFF +#endif + +/** + * AUTOIP_DEBUG: Enable debugging in autoip.c. + */ +#ifndef AUTOIP_DEBUG +#define AUTOIP_DEBUG LWIP_DBG_OFF +#endif + +/** + * SNMP_MSG_DEBUG: Enable debugging for SNMP messages. + */ +#ifndef SNMP_MSG_DEBUG +#define SNMP_MSG_DEBUG LWIP_DBG_OFF +#endif + +/** + * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs. + */ +#ifndef SNMP_MIB_DEBUG +#define SNMP_MIB_DEBUG LWIP_DBG_OFF +#endif + +/** + * DNS_DEBUG: Enable debugging for DNS. + */ +#ifndef DNS_DEBUG +#define DNS_DEBUG LWIP_DBG_OFF +#endif + +/* Custom definitions: !!!DO NOT CHANGE THIS SECTION!!! */ +#define LWIP_TIMEVAL_PRIVATE 0 + +#endif /* CFG_LWIP_H */ diff --git a/rmslog/cfg/cfg_md2.h b/rmslog/cfg/cfg_md2.h new file mode 100644 index 0000000..e937b90 --- /dev/null +++ b/rmslog/cfg/cfg_md2.h @@ -0,0 +1,53 @@ +/** + * \file + * + * + * \brief Configuration file for MD2 module. + * + * + * \author Daniele Basile + */ + +#ifndef CFG_MD2_H +#define CFG_MD2_H + +/** + * Size of block for MD2 algorithm. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + */ +#define CONFIG_MD2_BLOCK_LEN 16 + +/// Use standard permutation in MD2 algorithm. $WIZ$ type = "boolean" +#define CONFIG_MD2_STD_PERM 0 + +#endif /* CFG_MD2_H */ + diff --git a/rmslog/cfg/cfg_monitor.h b/rmslog/cfg/cfg_monitor.h new file mode 100644 index 0000000..d0e24da --- /dev/null +++ b/rmslog/cfg/cfg_monitor.h @@ -0,0 +1,47 @@ +/** + * \file + * + * + * \brief Kernel monitor configuration parameters + * + * \author Bernie Innocenti + */ + +#ifndef CFG_MONITOR_H +#define CFG_MONITOR_H + +/** + * Process monitor. + * $WIZ$ type = "autoenabled" + */ +#define CONFIG_KERN_MONITOR 1 + +#endif /* CFG_MONITOR_H */ diff --git a/rmslog/cfg/cfg_nmea.h b/rmslog/cfg/cfg_nmea.h new file mode 100644 index 0000000..9249a9a --- /dev/null +++ b/rmslog/cfg/cfg_nmea.h @@ -0,0 +1,85 @@ +/** + * \file + * + * + * \brief Configuration file for NMEA module. + * + * \author Daniele Basile + */ + +#ifndef CFG_NMEA_H +#define CFG_NMEA_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define NMEA_LOG_LEVEL LOG_LVL_ERR + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define NMEA_LOG_FORMAT LOG_FMT_TERSE + + +/** + * Maximum number of sentence parsers supported. + * + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_NMEAP_MAX_SENTENCES 8 + +/** + * Max length of a complete sentence. The standard says 82 bytes, but its probably + * better to go at least 128 since some units don't adhere to the 82 bytes + * especially for proprietary sentences. + * + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_NMEAP_MAX_SENTENCE_LENGTH 255 + +/** + * Max tokens in one sentence. 24 is enough for any standard sentence. + * + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_NMEAP_MAX_TOKENS 24 + +#endif /* CFG_NMEA_H */ + diff --git a/rmslog/cfg/cfg_parser.h b/rmslog/cfg/cfg_parser.h new file mode 100644 index 0000000..67e091a --- /dev/null +++ b/rmslog/cfg/cfg_parser.h @@ -0,0 +1,66 @@ +/** + * \file + * + * + * \brief Configuration file for parser module. + * + * \author Daniele Basile + */ + +#ifndef CFG_PARSER_H +#define CFG_PARSER_H + +/** + * Max number of arguments and results for each command + * $WIZ$ type = "int" + * $WIZ$ min = 0 + */ +#define CONFIG_PARSER_MAX_ARGS 4 + +/** + * Max number of commands + * $WIZ$ type = "int" + * $WIZ$ min = 8 + */ +#define CONFIG_MAX_COMMANDS_NUMBER 16 + +/** + * Enable compatibility behaviour. + * + * Skip the first word from incoming commands. Don't enable in new projects. + * $WIZ$ type = "boolean" + */ +#define CONFIG_ENABLE_COMPAT_BEHAVIOUR 1 + +#endif /* CFG_PARSER_H */ + + + diff --git a/rmslog/cfg/cfg_phase.h b/rmslog/cfg/cfg_phase.h new file mode 100644 index 0000000..1ed5107 --- /dev/null +++ b/rmslog/cfg/cfg_phase.h @@ -0,0 +1,55 @@ +/** + * \file + * + * + * \brief Configuration file for phase module. + * + * \author Daniele Basile + */ + +#ifndef CFG_PHASE_H +#define CFG_PHASE_H + +/** + * Max value of the duty cycle on triac. + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_TRIAC_MAX_DUTY 100 + +/** + * Max value of the triac power. + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_TRIAC_MAX_POWER 100 + +#endif /* CFG_PHASE_H */ diff --git a/rmslog/cfg/cfg_pocketbus.h b/rmslog/cfg/cfg_pocketbus.h new file mode 100644 index 0000000..aa0b090 --- /dev/null +++ b/rmslog/cfg/cfg_pocketbus.h @@ -0,0 +1,71 @@ +/** + * \file + * + * + * \brief Configuration file for pocketbus module. + * + * \author Daniele Basile + */ + +#ifndef CFG_POCKETBUS_H +#define CFG_POCKETBUS_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define POCKETBUS_LOG_LEVEL LOG_LVL_ERR + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define POCKETBUS_LOG_FORMAT LOG_FMT_TERSE + + +/** + *Buffer len for pockebus protocol. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + */ +#define CONFIG_POCKETBUS_BUFLEN 128 + +/** + * Command replay timeout in milliseconds. + * $WIZ$ type = "int" + */ +#define CONFIG_POCKETBUS_CMD_REPLY_TIMEOUT 50 + +#endif /* CFG_POCKETBUS_H */ diff --git a/rmslog/cfg/cfg_proc.h b/rmslog/cfg/cfg_proc.h new file mode 100644 index 0000000..e779ebe --- /dev/null +++ b/rmslog/cfg/cfg_proc.h @@ -0,0 +1,107 @@ +/** + * \file + * + * + * \brief Kernel configuration parameters + * + * \author Bernie Innocenti + */ + +#ifndef CFG_PROC_H +#define CFG_PROC_H + +/** + * Enable the multithreading kernel. + * + * $WIZ$ type = "autoenabled" + */ +#define CONFIG_KERN 1 + +/** + * Kernel interrupt supervisor. WARNING: Experimental, still incomplete! + * $WIZ$ type = "boolean" + * $WIZ$ supports = "False" + */ +#define CONFIG_KERN_IRQ 0 + +/** + * Preemptive process scheduling. + * + * $WIZ$ type = "boolean" + * $WIZ$ conditional_deps = "timer" + */ +#define CONFIG_KERN_PREEMPT 0 + +/** + * Time sharing quantum (a prime number prevents interference effects) [ms]. + * + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_KERN_QUANTUM 11 + +/** + * Priority-based scheduling policy. + * $WIZ$ type = "boolean" + */ +#define CONFIG_KERN_PRI 1 + +/** + * Dynamic memory allocation for processes. + * $WIZ$ type = "boolean" + * $WIZ$ conditional_deps = "heap" + */ +#define CONFIG_KERN_HEAP 1 + +/** + * Size of the dynamic memory pool used by processes. + * $WIZ$ type = "int" + * $WIZ$ min = 0 + */ +#define CONFIG_KERN_HEAP_SIZE 1024L + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define KERN_LOG_LEVEL LOG_LVL_ERR + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define KERN_LOG_FORMAT LOG_FMT_VERBOSE + +#endif /* CFG_PROC_H */ diff --git a/rmslog/cfg/cfg_pwm.h b/rmslog/cfg/cfg_pwm.h new file mode 100644 index 0000000..595189e --- /dev/null +++ b/rmslog/cfg/cfg_pwm.h @@ -0,0 +1,56 @@ +/** + * \file + * + * + * \brief Configuration file for PWM module. + * + * \author Daniele Basile + */ + +#ifndef CFG_PWM_H +#define CFG_PWM_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define PWM_LOG_LEVEL LOG_LVL_INFO + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define PWM_LOG_FORMAT LOG_FMT_VERBOSE + +#endif /* CFG_PWM_H */ diff --git a/rmslog/cfg/cfg_ramp.h b/rmslog/cfg/cfg_ramp.h new file mode 100644 index 0000000..162d2db --- /dev/null +++ b/rmslog/cfg/cfg_ramp.h @@ -0,0 +1,115 @@ + /** + * \file + * + * + * \brief Configuration file Ramp algorithm module. + * + * \author Daniele Basile + */ + +#ifndef CFG_RAMP_H +#define CFG_RAMP_H + +/** + * Define whether the ramp will use floating point calculation within ramp_evaluate(). + * Otherwise, a less precise fixed point version will be used, which is faster on + * platforms which do no support floating point operations. + * + * \note Floating point operations will be always done within ramp_compute() to + * precalculate values, so there has to be at least a floating point emulation support. + * + * $WIZ$ type = "boolean" + */ +#define RAMP_USE_FLOATING_POINT 0 + + +#if !RAMP_USE_FLOATING_POINT + + /** + * Number of least-significant bits which are stripped away during ramp evaluation. + * This setting allows to specify larger ramps at the price of less precision. + * + * The maximum ramp size allowed is 2^(24 + RAMP_CLOCK_SHIFT_PRECISION), in clocks. + * For instance, using RAMP_CLOCK_SHIFT_PRECISION 1, and a 8x prescaler, the maximum + * length of a ramp is about 6.7 secs. Raising RAMP_CLOCK_SHIFT_PRECISION to 2 + * brings the maximum length to 13.4 secs, at the price of less precision. + * + * ramp_compute() will check that the length is below the maximum allowed through + * a runtime assertion. + * + * \note This macro is used only for the fixed-point version of the ramp. + * $WIZ$ type = "int" + * $WIZ$ min = 0 + * $WIZ$ max = 32 + */ + #define RAMP_CLOCK_SHIFT_PRECISION 2 +#endif + + +/** +* Negative pulse width for ramp. +* $WIZ$ type = "int" +* $WIZ$ min = 1 +*/ +#define RAMP_PULSE_WIDTH 50 + +/** + * Default ramp time (microsecs). + * $WIZ$ type = "int" + * $WIZ$ min = 1000 + */ +#define RAMP_DEF_TIME 6000000UL +/** + * Default ramp maxfreq (Hz). + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define RAMP_DEF_MAXFREQ 5000 +/** + * Default ramp minfreq (Hz). + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define RAMP_DEF_MINFREQ 200 +/** + * Default ramp powerrun (deciampere). + * $WIZ$ type = "int" + * $WIZ$ min = 0 + */ +#define RAMP_DEF_POWERRUN 10 +/** + * Default ramp poweridle (Hz). + * $WIZ$ type = "int" + * $WIZ$ min = 0 + */ +#define RAMP_DEF_POWERIDLE 1 + +#endif /* CFG_RAMP_H */ diff --git a/rmslog/cfg/cfg_random.h b/rmslog/cfg/cfg_random.h new file mode 100644 index 0000000..5e3afdf --- /dev/null +++ b/rmslog/cfg/cfg_random.h @@ -0,0 +1,65 @@ +/** + * \file + * + * + * \author Andrea Righi + * + * \brief Configuration file for the "random" module + */ + +#ifndef CFG_RANDOM_H +#define CFG_RANDOM_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define RANDOM_LOG_LEVEL LOG_LVL_INFO + +/** + * module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define RANDOM_LOG_FORMAT LOG_FMT_TERSE + +/** + * Random security level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "random_level" + */ +#define RANDOM_SECURITY_LEVEL RANDOM_SECURITY_MINIMUM + +#endif /* CFG_RANDOM_H */ diff --git a/rmslog/cfg/cfg_randpool.h b/rmslog/cfg/cfg_randpool.h new file mode 100644 index 0000000..3038363 --- /dev/null +++ b/rmslog/cfg/cfg_randpool.h @@ -0,0 +1,55 @@ +/** + * \file + * + * + * \brief Configuration file for randpool module. + * + * + * \author Daniele Basile + */ + +#ifndef CFG_RANDPOOL_H +#define CFG_RANDPOOL_H + + +/** + * Define a size, in byte, of entropy pool. + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_SIZE_ENTROPY_POOL 64 + +/// Enable timer in randpool algo. $WIZ$ type = "boolean" +#define CONFIG_RANDPOOL_TIMER 1 + +#endif /* CFG_RANDPOOL_H */ + + diff --git a/rmslog/cfg/cfg_sd.h b/rmslog/cfg/cfg_sd.h new file mode 100644 index 0000000..8c40f82 --- /dev/null +++ b/rmslog/cfg/cfg_sd.h @@ -0,0 +1,75 @@ +/** + * \file + * + * + * \brief Configuration file Secure Digital module. + * + * + * \author Francesco Sacchi + */ + +#ifndef CFG_SD_H +#define CFG_SD_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define SD_LOG_LEVEL LOG_LVL_ERR + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define SD_LOG_FORMAT LOG_FMT_VERBOSE + + +/** + * Enable autoassignment of SD driver to disk drive number 0 of FatFs module. + * $WIZ$ type = "boolean" + * $WIZ$ conditional_deps = "fat" + */ +#define CONFIG_SD_AUTOASSIGN_FAT 1 + +/** + * Enable backward compatibility for sd_init(). + * If enabled, sd_init() will allocate internally an Sd context, + * otherwise sd_init() will need the context to be passed explicitly. + * + * $WIZ$ type = "boolean" + */ +#define CONFIG_SD_OLD_INIT 1 + +#endif /* CFG_SD_H */ diff --git a/rmslog/cfg/cfg_sem.h b/rmslog/cfg/cfg_sem.h new file mode 100644 index 0000000..905f045 --- /dev/null +++ b/rmslog/cfg/cfg_sem.h @@ -0,0 +1,47 @@ +/** + * \file + * + * + * \brief Kernel semaphores configuration parameters. + * + * \author Bernie Innocenti + */ + +#ifndef CFG_SEM_H +#define CFG_SEM_H + +/** + * Re-entrant mutual exclusion primitives. + * $WIZ$ type = "autoenabled" + */ +#define CONFIG_KERN_SEMAPHORES 1 + +#endif /* CFG_SEM_H */ diff --git a/rmslog/cfg/cfg_ser.h b/rmslog/cfg/cfg_ser.h new file mode 100644 index 0000000..91a10e0 --- /dev/null +++ b/rmslog/cfg/cfg_ser.h @@ -0,0 +1,222 @@ +/** + * \file + * + * + * \brief Configuration file for serial module. + * + * \author Daniele Basile + */ + +#ifndef CFG_SER_H +#define CFG_SER_H + +/** + * Example of setting for serial port and + * spi port. + * Edit these define for your project. + */ + +/** + * Size of the outbound FIFO buffer for port 0 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + */ +#define CONFIG_UART0_TXBUFSIZE 32 + +/** + * Size of the inbound FIFO buffer for port 0 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + */ +#define CONFIG_UART0_RXBUFSIZE 32 + +/** + * Size of the outbound FIFO buffer for port 1 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)" + */ +#define CONFIG_UART1_TXBUFSIZE 32 + +/** + * Size of the inbound FIFO buffer for port 1 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)" + */ +#define CONFIG_UART1_RXBUFSIZE 32 + +/** + * Size of the outbound FIFO buffer for port 2 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "lm3s or lpc2" + */ +#define CONFIG_UART2_TXBUFSIZE 32 + +/** + * Size of the inbound FIFO buffer for port 2 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "lm3s or lpc2" + */ +#define CONFIG_UART2_RXBUFSIZE 32 + +/** + * Size of the outbound FIFO buffer for port 3 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "lpc2" + */ +#define CONFIG_UART3_TXBUFSIZE 32 + +/** + * Size of the inbound FIFO buffer for port 3 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "lpc2" + */ +#define CONFIG_UART3_RXBUFSIZE 32 + + +/** + * Size of the outbound FIFO buffer for SPI port [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "avr" + */ +#define CONFIG_SPI_TXBUFSIZE 32 + +/** + * Size of the inbound FIFO buffer for SPI port [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "avr" + */ +#define CONFIG_SPI_RXBUFSIZE 32 + +/** + * Size of the outbound FIFO buffer for SPI port 0 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "at91" + */ +#define CONFIG_SPI0_TXBUFSIZE 32 + +/** + * Size of the inbound FIFO buffer for SPI port 0 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "at91" + */ +#define CONFIG_SPI0_RXBUFSIZE 32 + +/** + * Size of the outbound FIFO buffer for SPI port 1 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "at91" + */ +#define CONFIG_SPI1_TXBUFSIZE 32 + +/** + * Size of the inbound FIFO buffer for SPI port 1 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + * $WIZ$ supports = "at91" + */ +#define CONFIG_SPI1_RXBUFSIZE 32 + +/** + * SPI data order. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "ser_order_bit" + * $WIZ$ supports = "avr" + */ +#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST + +/** + * SPI clock division factor. + * $WIZ$ type = "int" + * $WIZ$ supports = "avr" + */ +#define CONFIG_SPI_CLOCK_DIV 16 + +/** + * SPI clock polarity: normal low or normal high. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "ser_spi_pol" + * $WIZ$ supports = "avr" + */ +#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW + +/** + * SPI clock phase you can choose sample on first edge or + * sample on second clock edge. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "ser_spi_phase" + * $WIZ$ supports = "avr" + */ +#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE + +/** + * Default transmit timeout (ms). Set to -1 to disable timeout support. + * $WIZ$ type = "int" + * $WIZ$ min = -1 + */ +#define CONFIG_SER_TXTIMEOUT -1 + +/** + * Default receive timeout (ms). Set to -1 to disable timeout support. + * $WIZ$ type = "int" + * $WIZ$ min = -1 + */ +#define CONFIG_SER_RXTIMEOUT -1 + +/** + * Use RTS/CTS handshake. + * $WIZ$ type = "boolean" + * $WIZ$ supports = "False" + */ +#define CONFIG_SER_HWHANDSHAKE 0 + +/** + * Default baudrate for all serial ports (set to 0 to disable). + * $WIZ$ type = "int" + * $WIZ$ min = 0 + */ +#define CONFIG_SER_DEFBAUDRATE 0UL + +/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean" +#define CONFIG_SER_STROBE 0 + +#endif /* CFG_SER_H */ diff --git a/rmslog/cfg/cfg_signal.h b/rmslog/cfg/cfg_signal.h new file mode 100644 index 0000000..ce5324e --- /dev/null +++ b/rmslog/cfg/cfg_signal.h @@ -0,0 +1,47 @@ +/** + * \file + * + * + * \brief Kernel signals configuration parameters + * + * \author Bernie Innocenti + */ + +#ifndef CFG_SIGNAL_H +#define CFG_SIGNAL_H + +/** + * Inter-process signals. + * $WIZ$ type = "autoenabled" + */ +#define CONFIG_KERN_SIGNALS 1 + +#endif /* CFG_SIGNAL_H */ diff --git a/rmslog/cfg/cfg_spi_bitbang.h b/rmslog/cfg/cfg_spi_bitbang.h new file mode 100644 index 0000000..1a3a8a9 --- /dev/null +++ b/rmslog/cfg/cfg_spi_bitbang.h @@ -0,0 +1,51 @@ +/** + * \file + * + * + * \brief Configuration file for SPI bitbang module. + * + * + * \author Daniele Basile + */ + +#ifndef CFG_SPI_BITBANG_H +#define CFG_SPI_BITBANG_H + +/** + * Set data order for emulated SPI. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "ordet_bit_list" + */ +#define CONFIG_SPI_DATAORDER SPI_LSB_FIRST + +#endif /* CFG_SPI_BITBANG_H */ + diff --git a/rmslog/cfg/cfg_stepper.h b/rmslog/cfg/cfg_stepper.h new file mode 100644 index 0000000..2925fb6 --- /dev/null +++ b/rmslog/cfg/cfg_stepper.h @@ -0,0 +1,69 @@ +/** + * \file + * + * + * \brief Configuration file for stepper motor module. + * + * \author Daniele Basile + */ + +#ifndef CFG_STEPPER_H +#define CFG_STEPPER_H + +/** + * Module logging level. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define STEPPER_LOG_LEVEL LOG_LVL_INFO + +/** + * Module logging format. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define STEPPER_LOG_FORMAT LOG_FMT_TERSE + +/** + * Max number of the stepper motor. + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_NUM_STEPPER_MOTORS 6 + +/** + * Max number of the timer usable on target to drive stepper motor. + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_TC_STEPPER_MAX_NUM 6 + +#endif /* CFG_STEPPER_H */ diff --git a/rmslog/cfg/cfg_tas5706a.h b/rmslog/cfg/cfg_tas5706a.h new file mode 100644 index 0000000..32b3598 --- /dev/null +++ b/rmslog/cfg/cfg_tas5706a.h @@ -0,0 +1,50 @@ +/** + * \file + * + * + * \brief Configuration file for the TAS5706A module. + * + * \author Luca Ottaviano + */ + +#ifndef CFG_TAS5706A_H +#define CFG_TAS5706A_H + +/** + * Maximum output volume for TAS chip [dB]. + * + * $WIZ$ type = "int" + * $WIZ$ min = -100 + * $WIZ$ max = 24 + */ +#define CONFIG_TAS_MAX_VOL -39 + +#endif /* CFG_TAS5706A_H */ diff --git a/rmslog/cfg/cfg_tftp.h b/rmslog/cfg/cfg_tftp.h new file mode 100644 index 0000000..36cc622 --- /dev/null +++ b/rmslog/cfg/cfg_tftp.h @@ -0,0 +1,20 @@ +#ifndef CFG_TFTP_H +#define CFG_TFTP_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define TFTP_LOG_LEVEL LOG_LVL_WARN + +/** + * Module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define TFTP_LOG_FORMAT LOG_FMT_VERBOSE + +#endif /* CFG_TFTP_H */ diff --git a/rmslog/cfg/cfg_thermo.h b/rmslog/cfg/cfg_thermo.h new file mode 100644 index 0000000..2734f89 --- /dev/null +++ b/rmslog/cfg/cfg_thermo.h @@ -0,0 +1,71 @@ +/** + * \file + * + * + * \brief Configuration file for thermo module. + * + * \author Daniele Basile + */ + +#ifndef CFG_THERMO_H +#define CFG_THERMO_H + +/** + * Module logging level. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define CONFIG_THERMO_LOG_LEVEL LOG_LVL_ERR +/** + * Module logging format. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define CONFIG_THERMO_LOG_FORMAT LOG_FMT_TERSE + + +/** + * Interval at which thermo control is performed [ms]. + * + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_THERMO_INTERVAL_MS 100 + +/** + * Number of different samples we interpolate over to get the hifi temperature. + * + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_THERMO_HIFI_NUM_SAMPLES 10 + +#endif /* CFG_THERMO_H */ diff --git a/rmslog/cfg/cfg_timer.h b/rmslog/cfg/cfg_timer.h new file mode 100644 index 0000000..b6d43b3 --- /dev/null +++ b/rmslog/cfg/cfg_timer.h @@ -0,0 +1,67 @@ +/** + * \file + * + * + * \brief Configuration file for timer module. + * + * + * \author Daniele Basile + */ + +#ifndef CFG_TIMER_H +#define CFG_TIMER_H + +/** + * Hardware timer selection for drv/timer.c. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "timer_select" + */ +#define CONFIG_TIMER TIMER_DEFAULT + +/** + * Debug timer interrupt using a strobe pin. + * $WIZ$ type = "boolean" + */ +#define CONFIG_TIMER_STROBE 0 + +/** + * Enable asynchronous timers. + * $WIZ$ type = "boolean" + */ +#define CONFIG_TIMER_EVENTS 1 + +/** + * Support hi-res timer_usleep(). + * $WIZ$ type = "boolean" + */ +#define CONFIG_TIMER_UDELAY 1 + +#endif /* CFG_TIMER_H */ diff --git a/rmslog/cfg/cfg_usb.h b/rmslog/cfg/cfg_usb.h new file mode 100644 index 0000000..dbfd6fe --- /dev/null +++ b/rmslog/cfg/cfg_usb.h @@ -0,0 +1,85 @@ +/** + * \file + * + * + * \author Andrea Righi + * + * \brief Configuration file for the USB driver module + */ + +#ifndef CFG_USB_H +#define CFG_USB_H + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define USB_LOG_LEVEL LOG_LVL_INFO + +/** + * module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define USB_LOG_FORMAT LOG_FMT_TERSE + +/** + * Size of the USB buffer used for endpoint transfers [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 2 + */ +#define CONFIG_USB_BUFSIZE 64 + +/** + * Maximum number of USB device interfaces (default = 1). + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_USB_INTERFACE_MAX 1 + +/** + * Maximum number of allocated endpoints (0 = auto). + * $WIZ$ type = "int" + * $WIZ$ min = 0 + */ +#define CONFIG_USB_EP_MAX 0 + +/** + * Maximum packet size of the control endpoint 0 [bytes]. + * $WIZ$ type = "int" + * $WIZ$ min = 8 + */ +#define CONFIG_EP0_MAX_SIZE 8 + +#endif /* CFG_USB_H */ diff --git a/rmslog/cfg/cfg_usbkbd.h b/rmslog/cfg/cfg_usbkbd.h new file mode 100644 index 0000000..5b6fb65 --- /dev/null +++ b/rmslog/cfg/cfg_usbkbd.h @@ -0,0 +1,78 @@ +/** + * \file + * + * + * \author Andrea Righi + * + * \brief Configuration file for the usbkbd driver module + */ + +#ifndef CFG_USBKBD_H +#define CFG_USBKBD_H + +/** + * Enable the usbkbd module. + * + * $WIZ$ type = "autoenabled" + */ +#define CONFIG_USBKBD 0 + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define USB_KEYBOARD_LOG_LEVEL LOG_LVL_INFO + +/** + * module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define USB_KEYBOARD_LOG_FORMAT LOG_FMT_TERSE + +/** + * USB vendor ID (please change this in your project, using a valid ID number!). + * + * $WIZ$ type = "hex" + */ +#define USB_KEYBOARD_VENDOR_ID 0x046d + +/** + * USB product ID (please change this in your project, using a valid ID number!). + * + * $WIZ$ type = "hex" + */ +#define USB_KEYBOARD_PRODUCT_ID 0xffff + +#endif /* CFG_USB_KEYBOARD_H */ diff --git a/rmslog/cfg/cfg_usbmouse.h b/rmslog/cfg/cfg_usbmouse.h new file mode 100644 index 0000000..7314328 --- /dev/null +++ b/rmslog/cfg/cfg_usbmouse.h @@ -0,0 +1,78 @@ +/** + * \file + * + * + * \author Andrea Righi + * + * \brief Configuration file for the usbmouse driver module + */ + +#ifndef CFG_USBMOUSE_H +#define CFG_USBMOUSE_H + +/** + * Enable the usbmouse module. + * + * $WIZ$ type = "autoenabled" + */ +#define CONFIG_USBMOUSE 0 + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define USB_MOUSE_LOG_LEVEL LOG_LVL_INFO + +/** + * module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define USB_MOUSE_LOG_FORMAT LOG_FMT_TERSE + +/** + * USB vendor ID (please change this in your project, using a valid ID number!). + * + * $WIZ$ type = "hex" + */ +#define USB_MOUSE_VENDOR_ID 0xffff + +/** + * USB product ID (please change this in your project, using a valid ID number!). + * + * $WIZ$ type = "hex" + */ +#define USB_MOUSE_PRODUCT_ID 0x0000 + +#endif /* CFG_USBMOUSE_H */ diff --git a/rmslog/cfg/cfg_usbser.h b/rmslog/cfg/cfg_usbser.h new file mode 100644 index 0000000..1fa44e7 --- /dev/null +++ b/rmslog/cfg/cfg_usbser.h @@ -0,0 +1,78 @@ +/** + * \file + * + * + * \author Andrea Righi + * + * \brief Configuration file for the USB serial driver module + */ + +#ifndef CFG_USBSER_H +#define CFG_USBSER_H + +/** + * Enable the usb-serial module. + * + * $WIZ$ type = "autoenabled" + */ +#define CONFIG_USBSER 0 + +/** + * Module logging level. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define USB_SERIAL_LOG_LEVEL LOG_LVL_INFO + +/** + * module logging format. + * + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define USB_SERIAL_LOG_FORMAT LOG_FMT_TERSE + +/** + * USB vendor ID (please change this in your project, using a valid ID number!). + * + * $WIZ$ type = "hex" + */ +#define USB_SERIAL_VENDOR_ID 0x05f9 + +/** + * USB product ID (please change this in your project, using a valid ID number!). + * + * $WIZ$ type = "hex" + */ +#define USB_SERIAL_PRODUCT_ID 0xffff + +#endif /* CFG_USBSER_H */ diff --git a/rmslog/cfg/cfg_wdt.h b/rmslog/cfg/cfg_wdt.h new file mode 100644 index 0000000..b53b327 --- /dev/null +++ b/rmslog/cfg/cfg_wdt.h @@ -0,0 +1,47 @@ +/** + * \file + * + * + * \brief Configuration file for watchdog module. + * + * + * \author Daniele Basile + */ + +#ifndef CFG_WDT_H +#define CFG_WDT_H + +/// Enable watchdog timer. $WIZ$ type = "autoenabled" +#define CONFIG_WATCHDOG 0 + +#endif /* CFG_WDT_H */ + + diff --git a/rmslog/cfg/cfg_xmodem.h b/rmslog/cfg/cfg_xmodem.h new file mode 100644 index 0000000..38db735 --- /dev/null +++ b/rmslog/cfg/cfg_xmodem.h @@ -0,0 +1,79 @@ +/** + * \file + * + * + * \brief Configuration file for xmodem module. + * + * \author Daniele Basile + */ + +#ifndef CFG_XMODEM_H +#define CFG_XMODEM_H + +/** + * Module logging level. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_level" + */ +#define CONFIG_XMODEM_LOG_LEVEL LOG_LVL_ERR +/** + * Module logging format. + * $WIZ$ type = "enum" + * $WIZ$ value_list = "log_format" + */ +#define CONFIG_XMODEM_LOG_FORMAT LOG_FMT_TERSE + + +/// Enable Rx. $WIZ$ type = "boolean" +#define CONFIG_XMODEM_RECV 1 + +/// Enable TX. $WIZ$ type = "boolean" +#define CONFIG_XMODEM_SEND 1 + +/// Allow a Rx/Tx of 1Kbyte block. $WIZ$ type = "boolean" +#define CONFIG_XMODEM_1KCRC 1 + +/** + * Max retries before giving up. + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_XMODEM_MAXRETRIES 15 + +/** + * Max retries before switching to BCC. + * $WIZ$ type = "int" + * $WIZ$ min = 1 + */ +#define CONFIG_XMODEM_MAXCRCRETRIES 7 + +#endif /* CFG_XMODEM_H */ + diff --git a/rmslog/hw/hw_afsk.c b/rmslog/hw/hw_afsk.c new file mode 100644 index 0000000..892b2a3 --- /dev/null +++ b/rmslog/hw/hw_afsk.c @@ -0,0 +1,97 @@ +/** + * \file + * + * + * \brief AFSK modem hardware-specific definitions. + * + * + * \author Francesco Sacchi + */ + + +#include "hw_afsk.h" + +#include +#include + +#include +#include + + +/* + * Here we are using only one modem. If you need to receive + * from multiple modems, you need to define an array of contexts. + */ +static Afsk *ctx; + +void hw_afsk_adcInit(int ch, Afsk *_ctx) +{ + ctx = _ctx; + ASSERT(ch <= 5); + + AFSK_STROBE_INIT(); + AFSK_STROBE_OFF(); + /* Set prescaler to clk/8 (2 MHz), CTC, top = ICR1 */ + TCCR1A = 0; + TCCR1B = BV(CS11) | BV(WGM13) | BV(WGM12); + /* Set max value to obtain a 9600Hz freq */ + ICR1 = ((CPU_FREQ / 8) / 9600) - 1; + + /* Set reference to AVCC (5V), select CH */ + ADMUX = BV(REFS0) | ch; + + DDRC &= ~BV(ch); + PORTC &= ~BV(ch); + DIDR0 |= BV(ch); + + /* Set autotrigger on Timer1 Input capture flag */ + ADCSRB = BV(ADTS2) | BV(ADTS1) | BV(ADTS0); + /* Enable ADC, autotrigger, 1MHz, IRQ enabled */ + /* We are using the ADC a bit out of specifications otherwise it's not fast enough for our + * purposes */ + ADCSRA = BV(ADEN) | BV(ADSC) | BV(ADATE) | BV(ADIE) | BV(ADPS2); +} + + +bool hw_afsk_dac_isr; + +/* + * This is how you declare an ISR. + */ +DECLARE_ISR(ADC_vect) +{ + TIFR1 = BV(ICF1); + afsk_adc_isr(ctx, ((int16_t)((ADC) >> 2) - 128)); + if (hw_afsk_dac_isr) + PORTD = afsk_dac_isr(ctx) & 0xF0; + else + PORTD = 128; +} diff --git a/rmslog/hw/hw_afsk.h b/rmslog/hw/hw_afsk.h new file mode 100644 index 0000000..4bebf74 --- /dev/null +++ b/rmslog/hw/hw_afsk.h @@ -0,0 +1,110 @@ +/** + * \file + * + * + * \brief AFSK modem hardware-specific definitions. + * + * + * \author Francesco Sacchi + */ + +#ifndef HW_AFSK_H +#define HW_AFSK_H + +#include "cfg/cfg_arch.h" + +#include + +struct Afsk; +void hw_afsk_adcInit(int ch, struct Afsk *_ctx); +void hw_afsk_dacInit(int ch, struct Afsk *_ctx); + +/** + * Initialize the specified channel of the ADC for AFSK needs. + * The adc should be configured to have a continuos stream of convertions. + * For every convertion there must be an ISR that read the sample + * and call afsk_adc_isr(), passing the context and the sample. + * + * \param ch channel to be used for AFSK demodulation. + * \param ctx AFSK context (\see Afsk). This parameter must be saved and + * passed back to afsk_adc_isr() for every convertion. + */ + +/* + * This macro will be called for AFSK initialization. We could implement everything here as a macro, + * but since initialization is rather complicated we decided to split its own function. Such function + * is defined in hw_afsk.c. + * Remember: since this .c file is not created by the wizard, you must add it to your_project_name.mk. + * If you create the file using BeRTOS SDK, it will be added for you. + */ +#define AFSK_ADC_INIT(ch, ctx) hw_afsk_adcInit(ch, ctx) + +/* + * Activate strobe pin. We use it for debugging purposes. If you don't use it, simply + * leave empty the following macros + */ +#define AFSK_STROBE_INIT() do { DDRB |= BV(5); } while (0) + +/* + * Set the pin high. This macro is called at the beginning of the interrupt routine + */ +#define AFSK_STROBE_ON() do { PORTB |= BV(5); } while (0) + +/* + * Set the pin low. This macro is called at the end of the interrupt routine + */ +#define AFSK_STROBE_OFF() do { PORTB &= ~BV(5); } while (0) + +/** + * Initialize the specified channel of the DAC for AFSK needs. + * The DAC has to be configured in order to call an ISR for every sample sent. + * The DAC doesn't have to start the IRQ immediatly but have to wait + * the AFSK driver to call AFSK_DAC_IRQ_START(). + * The ISR must then call afsk_dac_isr() passing the AFSK context. + * \param ch DAC channel to be used for AFSK modulation. + * \param ctx AFSK context (\see Afsk). This parameter must be saved and + * passed back to afsk_dac_isr() for every convertion. + */ +#define AFSK_DAC_INIT(ch, ctx) do { (void)ch, (void)ctx; DDRD |= 0xF0; DDRB |= BV(3); } while (0) + +/** + * Start DAC convertions on channel \a ch. + * \param ch DAC channel. + */ +#define AFSK_DAC_IRQ_START(ch) do { (void)ch; extern bool hw_afsk_dac_isr; PORTB |= BV(3); hw_afsk_dac_isr = true; } while (0) + +/** + * Stop DAC convertions on channel \a ch. + * \param ch DAC channel. + */ +#define AFSK_DAC_IRQ_STOP(ch) do { (void)ch; extern bool hw_afsk_dac_isr; PORTB &= ~BV(3); hw_afsk_dac_isr = false; } while (0) + +#endif /* HW_AFSK_H */ diff --git a/rmslog/hw/hw_buzzer.h b/rmslog/hw/hw_buzzer.h new file mode 100644 index 0000000..d597478 --- /dev/null +++ b/rmslog/hw/hw_buzzer.h @@ -0,0 +1,51 @@ +/** + * \file + * + * + * \brief Buzzer hardware-specific definitions + * + * + * \author Francesco Sacchi + */ + +#ifndef HW_BUZZER_H +#define HW_BUZZER_H + +#warning TODO:This is an example implementation, you must implement it! + +#define BUZZER_BIT 1 +#define IS_BUZZER_ON 0 +#define BUZZER_HW_INIT do { /* Implement me! */ } while (0) +#define BUZZER_ON do { /* Implement me! */ } while (0) +#define BUZZER_OFF do { /* Implement me! */ } while (0) + +#endif /* HW_BUZZER_H */ diff --git a/rmslog/hw/hw_dataflash.c b/rmslog/hw/hw_dataflash.c new file mode 100644 index 0000000..1a758a8 --- /dev/null +++ b/rmslog/hw/hw_dataflash.c @@ -0,0 +1,125 @@ +/** + * \file + * + * + * \brief Dataflash HW control routines. + * + * \author Francesco Sacchi + */ + +#include "hw/hw_dataflash.h" + +#include +#include +#include + +#warning TODO:This is an example implementation, you must implement it! + +MOD_DEFINE(hw_dataflash); + +/** + * Data flash init function. + * + * This function provide to initialize all that + * needs to drive a dataflash memory. + * Generaly needs to init pins to drive a CS line + * and reset line. + */ +void dataflash_hw_init(void) +{ + + //Disable CS line (remove if not needed) + dataflash_hw_setCS(false); + + /* + * Put here your code! + * + * Note: + * - if you drive manualy CS line, here init a CS pin + * - if you use a dedicated reset line, here init a reset pin + */ + + MOD_INIT(hw_dataflash); +} + +/** + * Chip Select drive. + * + * This function enable or disable a CS line. + * You must implement this function comply to a dataflash + * memory datasheet to allow the drive to enable a memory + * when \p enable flag is true, and disable it when is false. + */ +void dataflash_hw_setCS(bool enable) +{ + if (enable) + { + /* + * Put here your code to enable + * dataflash memory + */ + } + else + { + /* + * Put here your code to disable + * dataflash memory + */ + } +} + +/** + * Reset data flash memory. + * + * This function provide to send reset signal to + * dataflash memory. You must impement it comly to a dataflash + * memory datasheet to allow the drive to set a reset pin + * when \p enable flag is true, and disable it when is false. + * + */ +void dataflash_hw_setReset(bool enable) +{ + if (enable) + { + /* + * Put here your code to set reset of + * dataflash memory + */ + } + else + { + /* + * Put here your code to clear reset of + * dataflash memory + */ + } +} + diff --git a/rmslog/hw/hw_dataflash.h b/rmslog/hw/hw_dataflash.h new file mode 100644 index 0000000..0ea2fc9 --- /dev/null +++ b/rmslog/hw/hw_dataflash.h @@ -0,0 +1,47 @@ +/** + * \file + * + * + * \brief Dataflash HW control routines (interface). + * + * \author Francesco Sacchi + */ + +#ifndef HW_DATAFLASH_H +#define HW_DATAFLASH_H + +#include + +void dataflash_hw_init(void); +void dataflash_hw_setCS(bool enable); +void dataflash_hw_setReset(bool enable); + +#endif /* HW_DATAFLASH_H */ diff --git a/rmslog/hw/hw_dc_motor.h b/rmslog/hw/hw_dc_motor.h new file mode 100644 index 0000000..a414d53 --- /dev/null +++ b/rmslog/hw/hw_dc_motor.h @@ -0,0 +1,84 @@ +/** + * \file + * + * + * \brief DC motor hardware-specific definitions + * + * + * \author Daniele Basile + */ + +#ifndef HW_DC_MOTOR_H +#define HW_DC_MOTOR_H + +typedef enum MotorDCMap +{ + + /* Put here motor dc declaration */ + MOTOR_DC_CNT + +} MotorDCMap; + +/* + * Init all pin and device to manage dc motor. + */ +#define MOTOR_DC_INIT() \ + do { \ + /* Implement me! */ \ + } while (0) + + +/* + * Enable DC motor. + */ +#define DC_MOTOR_ENABLE(dev) \ + do { \ + /* Implement me! */ \ + } while (0) + +/* + * Disable DC motor. + */ +#define DC_MOTOR_DISABLE(dev) \ + do { \ + /* Implement me! */ \ + } while (0) + +/* + * Set direction for DC motor. + */ +#define DC_MOTOR_SET_DIR(dev, dir) \ + do { \ + /* Implement me! */ \ + } while (0) + + +#endif /* HW_DC_MOTOR_H */ diff --git a/rmslog/hw/hw_ft245rl.h b/rmslog/hw/hw_ft245rl.h new file mode 100644 index 0000000..e260020 --- /dev/null +++ b/rmslog/hw/hw_ft245rl.h @@ -0,0 +1,64 @@ +/** + * \file + * + * + * \brief FT245RL USB interface hardware-specific definitions + * + * + * \author Francesco Sacchi + */ + +#ifndef HW_FT245RL_H +#define HW_FT245RL_H + +#warning TODO:This is an example implementation, you must implement it! + +#define FT245RL_DATA_IN() /* Implement me! */ +#define FT245RL_DATA_OUT() /* Implement me! */ +#define WR_HI /* Implement me! */ +#define WR_LO /* Implement me! */ + +#define RD_HI /* Implement me! */ +#define RD_LO /* Implement me! */ + +#define FT245RL_INIT() \ +do \ +{ \ + /* Implement me! */ \ +} while(0) + +#define FT245RL_DATA_RDY() (/* Implement me! */ false) +#define FT245RL_GETDATA() ({/* Implement me! */ (0);}) +#define FT245RL_TX_ALLOWED() (/* Implement me! */ false) +#define FT245RL_SETDATA(data) do {/* Implement me! */ (void)((data)); } while(0) + +#endif /* HW_FT245RL_H */ + diff --git a/rmslog/hw/hw_i2c_bitbang.h b/rmslog/hw/hw_i2c_bitbang.h new file mode 100644 index 0000000..6aabb46 --- /dev/null +++ b/rmslog/hw/hw_i2c_bitbang.h @@ -0,0 +1,127 @@ +/** + * \file + * + * + * \brief Macro for I2C bitbang operation. + * + * + * + * \author Francesco Sacchi + */ + +#ifndef HW_I2C_BITBANG_H +#define HW_I2C_BITBANG_H + +#warning TODO:This is an example implementation, you must implement it! + +#define SDA_HI do { /* Implement me:Set SDA High by setting SDA pin as input */ } while (0) +#define SDA_LO do { /* Implement me:Set SDA Low by setting SDA pin as open collector output */ } while (0) +#define SCL_HI do { /* Implement me:Set SCL High by setting SCL pin as input */ } while (0) +#define SCL_LO do { /* Implement me:Set SCL Low by setting SCL pin as open collector output */ } while (0) + + +#define SCL_IN (true) /* Implement me: read SDA pin state */ +#define SDA_IN (true) /* Implement me: read SCL pin state */ + +/** + * This macro should set SDA and SCL lines as input. + */ +#define I2C_BITBANG_HW_INIT do { /* Implement me! */ } while (0) + +/** + * Half bit delay routine used to generate the correct timings. + */ +#define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0) + + +/* + * New api + */ +#include + +INLINE void i2c_sdaHi(int dev) +{ + (void)(dev); + /* Implement me:Set SDA High by setting SDA pin as input */ +} + +INLINE void i2c_sdaLo(int dev) +{ + (void)(dev); + /* Implement me:Set SDA Low by setting SDA pin as open collector output */ +} + +INLINE void i2c_sclHi(int dev) +{ + (void)(dev); + /* Implement me:Set SCL High by setting SCL pin as input */ +} + +INLINE void i2c_sclLo(int dev) +{ + (void)(dev); + /* Implement me:Set SCL Low by setting SCL pin as open collector output */ +} + +INLINE bool i2c_sdaIn(int dev) +{ + (void)(dev); + /* Implement me: read SDA pin state */ + return true; +} + +INLINE bool i2c_sclIn(int dev) +{ + (void)(dev); + /* Implement me: read SCL pin state */ + return true; +} + +/** + * Half bit delay routine used to generate the correct timings. + */ +INLINE void i2c_halfbitDelay(int dev) +{ + (void)(dev); + /* Implement me! */ +} + +/** + * This macro should set SDA and SCL lines as input. + */ +INLINE void i2c_bitbangInit(int dev) +{ + (void)(dev); + /* Implement me! */ +} + +#endif /* HW_I2C_BITBANG_H */ diff --git a/rmslog/hw/hw_kbd.h b/rmslog/hw/hw_kbd.h new file mode 100644 index 0000000..e78a1ce --- /dev/null +++ b/rmslog/hw/hw_kbd.h @@ -0,0 +1,71 @@ +/** + * \file + * + * + * \brief Keyboard hardware-specific definitions + * + * + * \author Francesco Sacchi + * \author Stefano Fedrigo + */ + +#ifndef HW_KBD_H +#define HW_KBD_H + +#include "hw/kbd_map.h" + +#include + +#warning TODO:This is an example implementation, you must implement it! + +#define K_RPT_MASK (K_UP | K_DOWN | K_OK | K_CANCEL) + +#define KBD_HW_INIT \ + do { \ + /* Put here code to init hw */ \ + } while (0) + +EXTERN_C int emul_kbdReadCols(void); + +/** + * Read the keyboard ports and return the mask of + * depressed keys. + */ +INLINE keymask_t kbd_readkeys(void) +{ + /* Implement me! */ + + //Only for test remove when implement this function + return 0; +} + +#endif /* HW_KBD_H */ diff --git a/rmslog/hw/hw_lcd_32122a.h b/rmslog/hw/hw_lcd_32122a.h new file mode 100644 index 0000000..6ec29c5 --- /dev/null +++ b/rmslog/hw/hw_lcd_32122a.h @@ -0,0 +1,155 @@ +/** + * \file + * + * + * \brief Displaytech 32122A LCD driver + * + * \author Bernie Innocenti + * \author Stefano Fedrigo + * + */ + +#ifndef HW_LCD_32122A_H +#define HW_LCD_32122A_H + +#include +#include + +#warning TODO:This is an example implementation, you must implement it! + +/** + * Predefined LCD PWM contrast values + */ +#define LCD_DEF_PWM 145 +#define LCD_MAX_PWM 505 +#define LCD_MIN_PWM 130 +#define LCD_PWM_CH 0 + + +/** + * \name LCD I/O pins/ports + * @{ + */ +#define LCD_RS /* Implement me! */ +#define LCD_RW /* Implement me! */ +#define LCD_PE_E1 /* Implement me! */ +#define LCD_PE_E2 /* Implement me! */ +#define LCD_DB0 /* Implement me! */ +#define LCD_DB1 /* Implement me! */ +#define LCD_DB2 /* Implement me! */ +#define LCD_DB3 /* Implement me! */ +#define LCD_DB4 /* Implement me! */ +#define LCD_DB5 /* Implement me! */ +#define LCD_DB6 /* Implement me! */ +#define LCD_DB7 /* Implement me! */ +#define LCD_PF_DB0 /* Implment me! */ +/*@}*/ + +/** + * \name LCD bus control macros + * @{ + */ +#define LCD_CLR_A0 do { /* Implement me! */ } while (0) +#define LCD_SET_A0 do { /* Implement me! */ } while (0) +#define LCD_CLR_RD do { /* Implement me! */ } while (0) +#define LCD_SET_RD do { /* Implement me! */ } while (0) +#define LCD_CLR_E1 do { /* Implement me! */ } while (0) +#define LCD_SET_E1 do { /* Implement me! */ } while (0) +#define LCD_CLR_E2 do { /* Implement me! */ } while (0) +#define LCD_SET_E2 do { /* Implement me! */ } while (0) +#define LCD_SET_E(x) do { (void)x; /* Implement me! */ } while (0) +#define LCD_CLR_E(x) do { (void)x; /* Implement me! */ } while (0) +/*@}*/ + +/** + * \name Chip select bits for LCD_SET_E() + * @{ + */ +#define LCDF_E1 ( 0/* Implement me! */) +#define LCDF_E2 ( 0/* Implement me! */) +/*@}*/ +/** Read from the LCD data bus (DB[0-7]) */ +#define LCD_WRITE(x) ((void)x)/* Implement me! */ +/** Write to the LCD data bus (DB[0-7]) */ +#define LCD_READ (0 /* Implement me! */ ) + +/** Set data bus direction to output (write to display) */ +#define LCD_DB_OUT /* Implement me! */ + +/** Set data bus direction to input (read from display) */ +#define LCD_DB_IN /* Implement me! */ + +/** Delay for write (Enable pulse width, 220ns) */ +#define LCD_DELAY_WRITE \ + do { \ + NOP; \ + NOP; \ + NOP; \ + NOP; \ + NOP; \ + } while (0) + +/** Delay for read (Data ouput delay time, 120ns) */ +#define LCD_DELAY_READ \ + do { \ + NOP; \ + NOP; \ + NOP; \ + NOP; \ + } while (0) + + +#define LCD_32122_RESET() do { /* Implement me! */ } while (0) + +INLINE void lcd_32122a_hw_bus_init(void) +{ + cpu_flags_t flags; + IRQ_SAVE_DISABLE(flags); + + /* + * Here set bus pin! + * to init a lcd device. + * + */ + + /* + * Data bus is in output state most of the time: + * LCD r/w functions assume it is left in output state + */ + LCD_DB_OUT; + + + IRQ_RESTORE(flags); +} + +#endif /* HW_LCD_32122A_H */ + diff --git a/rmslog/hw/hw_lcd_hd44.h b/rmslog/hw/hw_lcd_hd44.h new file mode 100644 index 0000000..dfebbca --- /dev/null +++ b/rmslog/hw/hw_lcd_hd44.h @@ -0,0 +1,157 @@ +/** + * \file + * + * + * \brief LCD low-level hardware macros + * + * \author Bernie Innocenti + * \author Stefano Fedrigo + * + */ + +#ifndef HW_LCD_HD44_H +#define HW_LCD_HD44_H + +#include "cfg/cfg_lcd_hd44.h" /* CONFIG_LCD_4BIT */ + +#include +#include + +#warning TODO:This is an example implementation, you must implement it! + +/** + * \name LCD I/O pins/ports + * @{ + */ +#define LCD_RS /* Implement me! */ +#define LCD_RW /* Implement me! */ +#define LCD_E /* Implement me! */ +#define LCD_DB0 /* Implement me! */ +#define LCD_DB1 /* Implement me! */ +#define LCD_DB2 /* Implement me! */ +#define LCD_DB3 /* Implement me! */ +#define LCD_DB4 /* Implement me! */ +#define LCD_DB5 /* Implement me! */ +#define LCD_DB6 /* Implement me! */ +#define LCD_DB7 /* Implement me! */ +/*@}*/ + +/** + * \name DB high nibble (DB[4-7]) + * @{ + */ + +#if CONFIG_LCD_4BIT + #define LCD_MASK (LCD_DB7 | LCD_DB6 | LCD_DB5 | LCD_DB4) + #define LCD_SHIFT 4 +#else + #define LCD_MASK (uint8_t)0xff + #define LCD_SHIFT 0 +#endif +/*@}*/ + +/** + * \name LCD bus control macros + * @{ + */ +#define LCD_CLR_RS /* Implement me! */ +#define LCD_SET_RS /* Implement me! */ +#define LCD_CLR_RD /* Implement me! */ +#define LCD_SET_RD /* Implement me! */ +#define LCD_CLR_E /* Implement me! */ +#define LCD_SET_E /* Implement me! */ + +/* Enter command mode */ +#define LCD_SET_COMMAND() /* Implement me! */ + +/* Enter data mode */ +#define LCD_SET_DATA() /* Implement me! */ + +#if CONFIG_LCD_4BIT + #define LCD_WRITE_H(x) ((void)x)/* Implement me! */ + #define LCD_WRITE_L(x) ((void)x)/* Implement me! */ + #define LCD_READ_H ( 0 /* Implement me! */ ) + #define LCD_READ_L ( 0 /* Implement me! */ ) +#else + #define LCD_WRITE(x) ((void)x)/* Implement me! */ + #define LCD_READ (0 /* Implement me! */ ) +#endif +/*@}*/ + +/** Set data bus direction to output (write to display) */ +#define LCD_DB_OUT /* Implement me! */ + +/** Set data bus direction to input (read from display) */ +#define LCD_DB_IN /* Implement me! */ +/** Delay for write (Enable pulse width, 220ns) */ +#define LCD_DELAY_WRITE \ + do { \ + NOP; \ + NOP; \ + NOP; \ + NOP; \ + NOP; \ + } while (0) + +/** Delay for read (Data ouput delay time, 120ns) */ +#define LCD_DELAY_READ \ + do { \ + NOP; \ + NOP; \ + NOP; \ + NOP; \ + } while (0) + + + +INLINE void lcd_hd44_hw_bus_init(void) +{ + cpu_flags_t flags; + IRQ_SAVE_DISABLE(flags); + + /* + * Here set bus pin! + * to init a lcd device. + * + */ + + /* + * Data bus is in output state most of the time: + * LCD r/w functions assume it is left in output state + */ + LCD_DB_OUT; + + + IRQ_RESTORE(flags); +} + +#endif /* HW_LCD_HD44_H */ diff --git a/rmslog/hw/hw_led.h b/rmslog/hw/hw_led.h new file mode 100644 index 0000000..2bd46ee --- /dev/null +++ b/rmslog/hw/hw_led.h @@ -0,0 +1,47 @@ +/** + * \file + * + * + * \brief Led on/off macros. + * + * \author Daniele Basile + */ + +#ifndef HW_LED_H +#define HW_LED_H + +#include + +#define LED_ON() PORTB |= BV(5) +#define LED_OFF() PORTB &= ~BV(5) +#define LED_INIT() DDRB |= BV(5) + +#endif /* HW_LED_H */ diff --git a/rmslog/hw/hw_lm75.h b/rmslog/hw/hw_lm75.h new file mode 100644 index 0000000..290dae0 --- /dev/null +++ b/rmslog/hw/hw_lm75.h @@ -0,0 +1,49 @@ +/** + * \file + * + * + * \brief Hardware macro definition. + * + * \author Daniele Basile + */ + +#ifndef HW_LM75_H +#define HW_LM75_H + +#warning TODO:This is an example implentation, you must implement it! + +#define LM75_HW_INIT() \ + do { \ + /* Pin init */\ + } while (0) + +#endif /* HW_LM75_H */ + diff --git a/rmslog/hw/hw_mcp41.c b/rmslog/hw/hw_mcp41.c new file mode 100644 index 0000000..512b19a --- /dev/null +++ b/rmslog/hw/hw_mcp41.c @@ -0,0 +1,52 @@ +/** + * \file + * + * + * \brief MCP41 hardware-specific definitions + * + * \author Francesco Sacchi + */ + +#include "hw/hw_mcp41.h" + +#include +#include + +#warning TODO:This is an example implementation, you must implement it! + +const uint16_t mcp41_ports[MCP41_CNT] = +{ + 0, /* add here mcp41 ports */ +}; +const uint8_t mcp41_pins [MCP41_CNT] = +{ + 0, /* add here mcp41 ports */ +}; + diff --git a/rmslog/hw/hw_mcp41.h b/rmslog/hw/hw_mcp41.h new file mode 100644 index 0000000..b31a7dd --- /dev/null +++ b/rmslog/hw/hw_mcp41.h @@ -0,0 +1,74 @@ +/** + * \file + * + * + * \brief MCP41 hardware-specific definitions + * + * \author Francesco Sacchi + */ + +#ifndef HW_MCP41_H +#define HW_MCP41_H + +#include "hw/mcp41_map.h" + +#include + + +#warning TODO:This is an example implementation, you must implement it! + + +INLINE void SET_MCP41_DDR(Mcp41Dev dev) +{ + /* Implement me! */ + //Warning: this funtions is like avr target name, + //fix it to comply for all target. + + //Only for test remove when implement this function + (void)dev; +} + +INLINE void MCP41_ON(Mcp41Dev i) +{ + /* Implement me! */ + + //Only for test remove when implement this function + (void)i; +} + +INLINE void MCP41_OFF(Mcp41Dev i) +{ + /* Implement me! */ + + //Only for test remove when implement this function + (void)i; +} + +#endif /* HW_MCP41_H */ diff --git a/rmslog/hw/hw_ntc.c b/rmslog/hw/hw_ntc.c new file mode 100644 index 0000000..2509239 --- /dev/null +++ b/rmslog/hw/hw_ntc.c @@ -0,0 +1,45 @@ +/** + * \file + * + * + * \brief NTC hardware-specific definition + * + * \author Lorenzo Berni + * + */ + +#include +#include "hw/ntc_map.h" + +const res_t NTC_RSER[NTC_CNT]; +const res_t NTC_RPAR[NTC_CNT]; +const amp_t NTC_AMP[NTC_CNT]; +const NtcHwInfo* NTC_INFO[NTC_CNT]; diff --git a/rmslog/hw/hw_ntc.h b/rmslog/hw/hw_ntc.h new file mode 100644 index 0000000..0f6743a --- /dev/null +++ b/rmslog/hw/hw_ntc.h @@ -0,0 +1,135 @@ +/** + * \file + * + * + * \brief NTC hardware-specific definition + * + * \author Francesco Sacchi + * + * A NTC acts as a variable resistor, whose resistance changes as a + * function of the temperature it measures. To sample it correctly, it is + * usually parallelized and serialized with two fixed resistor. The following diagram shows + * what is the exact disposition of the components, as handled by this + * library: + * + *
+ *                 o Vref
+ *                 |
+ *                 |                               o Vref
+ *                 |                               |
+ *               -----                             |
+ *              |     |                        ---------
+ *              | Rser|                       |         |
+ *              |     |                       |         |
+ *               -----     -----              |   ADC   |
+ *                 | Vp   |     |             |         |
+ *      -----------|------| Amp |-------------|         |
+ *     |           |      |     |      Vadc   |         |
+ *   -----       -----     -----               ---------
+ *  |     |     |     |
+ *  | NTC |     | Rpar|
+ *  |     |     |     |
+ *   -----       -----
+ *     |           |
+ *     |           |
+ *   -----       -----
+ *    ---         ---
+ *
+ * Amp is an amplifier that amplify of AMP times the signal. + * If we indicate Rp as the parallel of NTC with Rpar, ADCBITS as the bits of the ad converter + * and ADCVAL as the result from the adc convertion (Not Vadc but just the value read + * from the adc register), after various calculation, the expression of Rp is: + * + *
+ *
+ *            ADCVAL * Rser
+ * Rp = ------------------------
+ *         ADCBITS
+ *	2         * AMP - ADCVAL
+ *
+ * + * And after that NTC obvisiously is: + *
+ *        Rpar * Rp
+ * NTC = ----------
+ *        Rpar - Rp
+ *
+ * + * + * The function ntc_hw_read() compute the resistence using these formulas above. + */ + +#ifndef HW_NTC_H +#define HW_NTC_H + +#include "ntc_map.h" + +#include + +#include +#include + +#warning TODO:This is an example implementation, you must implement it! + +extern const res_t NTC_RSER[NTC_CNT]; +extern const res_t NTC_RPAR[NTC_CNT]; +extern const amp_t NTC_AMP[NTC_CNT]; +extern const NtcHwInfo* NTC_INFO[NTC_CNT]; + + +/*! + * Read the resistence of ntc device \a dev. + * Return the result in res_t type. + */ +INLINE res_t ntc_hw_read(NtcDev dev) +{ + ASSERT(dev < NTC_CNT); + // See above for formula explanation. + adcread_t adcval = adc_read((uint16_t)dev); + float rp = (adcval * NTC_RSER[dev] ) / ((1 << adc_bits()) * NTC_AMP[dev] - adcval); + + //kprintf("Rp[%f], Rntc[%f]\n", rp/100, ((NTC_RPAR[dev] * rp) / (NTC_RPAR[dev] - rp)) / 100.0); + + return ( (NTC_RPAR[dev] * rp) / (NTC_RPAR[dev] - rp) ); +} + + +/*! + * Return the info (aka the table) associated with ntc device \a dev. + */ +INLINE const NtcHwInfo* ntc_hw_getInfo(NtcDev dev) +{ + return NTC_INFO[dev]; +} + +#define NTC_HW_INIT do { /* Implement me! */ } while(0) + +#endif /* HW_NTC_H */ diff --git a/rmslog/hw/hw_phase.c b/rmslog/hw/hw_phase.c new file mode 100644 index 0000000..cd50242 --- /dev/null +++ b/rmslog/hw/hw_phase.c @@ -0,0 +1,45 @@ +/** + * \file + * + * + * \brief Phase control hardware-specific definitions + * + * \author Francesco Sacchi + */ + +#ifndef HW_PHASE_H +#define HW_PHASE_H + +#include "hw/hw_phase.h" + +#warning TODO:This is an example implementation, you must implement it! + +#endif /* HW_PHASE_H */ diff --git a/rmslog/hw/hw_phase.h b/rmslog/hw/hw_phase.h new file mode 100644 index 0000000..7cae67c --- /dev/null +++ b/rmslog/hw/hw_phase.h @@ -0,0 +1,79 @@ +/** + * \file + * + * + * \brief Phase control hardware-specific definitions + * + * + * \author Francesco Sacchi + */ + +#ifndef HW_PHASE_H +#define HW_PHASE_H + +#include "hw/phase_map.h" + +#include + +#warning TODO:This is an example implementation, you must implement it! + +#define PHASE_HW_INIT do { /* Implement me! */ }while (0) + +INLINE void TRIAC_OFF(TriacDev i) +{ + /* Implement me! */ + + //Only for test remove when implement this function + (void)i; +} + + +INLINE void TRIAC_ON(TriacDev i) +{ + /* Implement me! */ + + //Only for test remove when implement this function + (void)i; +} + +INLINE void SET_TRIAC_DDR(TriacDev i) +{ + /* Implement me! */ + + //Only for test remove when implement this function + (void)i; +} + +void zerocross_isr(void); +#define DEFINE_ZEROCROSS_ISR() void zerocross_isr(void) + + +#endif /* HW_PHASE_H */ diff --git a/rmslog/hw/hw_rit128x96.h b/rmslog/hw/hw_rit128x96.h new file mode 100644 index 0000000..c24d1a8 --- /dev/null +++ b/rmslog/hw/hw_rit128x96.h @@ -0,0 +1,78 @@ +/** + * \file + * + * + * \brief LM3S1986: OLED-RIT-128x96 (P14201) low-level hardware macros + * + * \author Andrea Righi + */ + +#ifndef HW_RIT128x96_H +#define HW_RIT128x96_H + +#include "cfg/macros.h" /* BV() */ +#include "cfg/debug.h" + +#include +#include +#include + +/** + * \name LCD I/O pins/ports + * @{ + */ +/* OLED Data/Command control pin */ +#define GPIO_OLEDDC_PIN 0 /* Implement me! */ + +/* OLED enable pin */ +#define GPIO_OLEDEN_PIN 0 /* Implement me! */ +/*@}*/ + +/** + * \name LCD bus control macros + * @{ + */ +/* Enter command mode */ +#define LCD_SET_COMMAND() /* Implement me! */ + +/* Enter data mode */ +#define LCD_SET_DATA() /* Implement me! */ + +/* Send data to the display */ +#define LCD_WRITE(x) ((void)x)/* Implement me! */ +/*@}*/ + +INLINE void lcd_rit128x96_hw_bus_init(void) +{ + /* Implement me! */ +} + +#endif /* HW_RIT128x96_H */ diff --git a/rmslog/hw/hw_sd.h b/rmslog/hw/hw_sd.h new file mode 100644 index 0000000..ed10b80 --- /dev/null +++ b/rmslog/hw/hw_sd.h @@ -0,0 +1,52 @@ +/** + * \file + * + * + * \brief SD driver hardware-specific definitions. + * + * + * \author Luca Ottaviano + */ + +#ifndef HW_SD_H +#define HW_SD_H + +#warning FIXME: This is an example implementation, you must implement it + +#define SD_CS_INIT() do { /* implement me */} while(0) +#define SD_CS_ON() do { /* implement me */} while(0) +#define SD_CS_OFF() do { /* implement me */} while(0) + +#define SD_PIN_INIT() do { /* implement me */} while(0) +#define SD_CARD_PRESENT() true /* implement me */ +#define SD_WRITE_PROTECT() false /* implement me */ + +#endif /* HW_SD_H */ diff --git a/rmslog/hw/hw_ser.h b/rmslog/hw/hw_ser.h new file mode 100644 index 0000000..2033c98 --- /dev/null +++ b/rmslog/hw/hw_ser.h @@ -0,0 +1,52 @@ +/** + * \file + * + * + * \brief Serial hardware-specific definitions + * + * + * \author Daniele Basile + */ + +#ifndef HW_SER_H +#define HW_SER_H + +#include "cfg/cfg_ser.h" + +#if CONFIG_SER_STROBE + #warning FIXME: this is an example implementation, you must implement it + + #define SER_STROBE_INIT do { /* implement me */ } while (0) + #define SER_STROBE_ON do { /* implement me */ } while (0) + #define SER_STROBE_OFF do { /* implement me */ } while (0) +#endif + +#endif /* HW_SER_H */ diff --git a/rmslog/hw/hw_sipo.h b/rmslog/hw/hw_sipo.h new file mode 100644 index 0000000..552d4dd --- /dev/null +++ b/rmslog/hw/hw_sipo.h @@ -0,0 +1,108 @@ +/** + * \file + * + * + * \brief Macro for HW_SIPO_H + * + * + * + * \author Andrea Grandi + * \author Daniele Basile + */ + +#ifndef HW_SIPO_H +#define HW_SIPO_H + +/** + * Map sipo connection on board. + */ +typedef enum SipoMap +{ + SIPO_CNT +} SipoMap; + +/** + * Define generic macro to set pins logic level + */ +#define SIPO_SET_LEVEL_LOW(dev) do { /* Implement me! */ } while (0) +#define SIPO_SET_LEVEL_HIGH(dev) do { /* Implement me! */ } while (0) + + +/** + * Generate one low pulse on select line. + */ +#define PULSE_LOW(dev) do { /* Implement me! */ } while (0) + +/** + * Generate one hight pulse on select line. + */ +#define PULSE_HIGH(dev) do { /* Implement me! */ } while (0) + + +/** + * Define the procedure to drive serial input in sipo device (SI). + */ +#define SIPO_SI_HIGH() do { /* Implement me! */ } while (0) +#define SIPO_SI_LOW() do { /* Implement me! */ } while (0) + +/** + * Drive clock to shift SI data into latch. + */ +#define SIPO_SI_CLOCK(clk_pol) \ + do { \ + (void)clk_pol; \ + /* Implement me! */ \ + } while (0) + +/** + * Do everything needed in order to load dato into sipo. + */ +#define SIPO_LOAD(device, load_pol) do { /* Implement me! */ } while (0) + +/** + * Enable the shift register output. + */ +#define SIPO_ENABLE() do { /* Implement me! */ } while (0) + +/** + * Set polarity for Load, Clk, SI signals. + */ +#define SIPO_SET_LD_LEVEL(device, load_pol) do { /* Implement me! */ } while (0) +#define SIPO_SET_CLK_LEVEL(clock_pol) do { /* Implement me! */ } while (0) +#define SIPO_SET_SI_LEVEL() do { /* Implement me! */ } while (0) + +/** + * Do anything that needed to init sipo pins. + */ +#define SIPO_INIT_PIN() do { /* Implement me! */ } while (0) + +#endif /* HW_SIPO_H */ diff --git a/rmslog/hw/hw_spi.h b/rmslog/hw/hw_spi.h new file mode 100644 index 0000000..991b86a --- /dev/null +++ b/rmslog/hw/hw_spi.h @@ -0,0 +1,114 @@ +/** + * \file + * + * + * \brief Hardware macro definition. + * + * + * \author Daniele Basile + */ + +#ifndef HW_SPI_H +#define HW_SPI_H + +#warning TODO:This is an example implentation, you must implement it! + +#include + +/** + * SPI pin definition. + * + * \note CS is assert when level + * is low. + * + * \{ + */ +#define CS /* pin */ ///Connect to CS pin of Flash memory. +#define SCK /* pin */ ///Connect to SCK pin of Flash memory. +#define MOSI /* pin */ ///Connect to SI pin of Flash memory. +#define MISO /* pin */ ///Connect to SO pin of Flash memory. +#define SPI_PORT /* pin */ ///Micro pin PORT register. +#define SPI_PIN /* pin */ ///Micro pin PIN register. +#define SPI_DDR /* pin */ ///Micro pin DDR register. +/*\}*/ + +/** + * Pin logic level. + * + * \{ + */ +#define MOSI_LOW() do { /* Implement me! */ } while(0) +#define MOSI_HIGH() do { /* Implement me! */ } while(0) +#define MISO_HIGH() do { /* Implement me! */ } while(0) +#define SCK_LOW() do { /* Implement me! */ } while(0) +#define SCK_HIGH() do { /* Implement me! */ } while(0) +#define CS_LOW() do { /* Implement me! */ } while(0) +#define CS_HIGH() do { /* Implement me! */ } while(0) +/*\}*/ + +/** + * SPI pin commands. + * + * \{ + */ +#define CS_ENABLE() CS_LOW() +#define CS_DISABLE() CS_HIGH() +#define SS_ACTIVE() CS_LOW() +#define SS_INACTIVE() CS_HIGH() +#define SCK_INACTIVE() SCK_LOW() +#define SCK_ACTIVE() SCK_HIGH() +#define CS_OUT() do { /* Implement me! */ } while(0) +#define MOSI_IN() do { /* Implement me! */ } while(0) +#define MOSI_OUT() do { /* Implement me! */ } while(0) +#define IS_MISO_HIGH() (false /* Implement me! */ ) +#define MISO_IN() do { /* Implement me! */ } while(0) +#define MISO_OUT() do { /* Implement me! */ } while(0) +#define SCK_OUT() do { /* Implement me! */ } while(0) + +#define SCK_PULSE()\ + do {\ + SCK_HIGH();\ + SCK_LOW();\ + } while (0) +/*\}*/ + + +#define SPI_HW_INIT() \ + CS_DISABLE();\ + MOSI_LOW();\ + SCK_LOW();\ + MISO_IN();\ + MOSI_OUT();\ + SCK_OUT();\ + CS_OUT(); + +#endif /* HW_SPI_H */ + diff --git a/rmslog/hw/hw_stepper.h b/rmslog/hw/hw_stepper.h new file mode 100644 index 0000000..b97bacb --- /dev/null +++ b/rmslog/hw/hw_stepper.h @@ -0,0 +1,308 @@ +/** + * \file + * + * + * \brief Stepper hardware-specific definitions + * + * + * \author Daniele Basile + */ + + +#ifndef HW_STEPPER_H +#define HW_STEPPER_H + +#include + +#include + +#include + +#warning TODO:This is an example implentation, you must implement it! + +#define STEPPER_STROBE_INIT \ +do { \ + /* put init code for strobe */ \ +} while (0) + + +#define STEPPER_STROBE_ON do { /* Implement me! */ } while(0) +#define STEPPER_STROBE_OFF do { /* Implement me! */ } while(0) + +/** + * CPU clock frequency is divided by 2^STEPPER_PRESCALER_LOG2 to + * obtain stepper clock. + */ +#define STEPPER_PRESCALER_LOG2 1 + +/** + * Stepper timer clock frequency. + */ +#define STEPPER_CLOCK ((CPU_FREQ) >> STEPPER_PRESCALER_LOG2) + +/** + * us delay to reset a stepper motor. + * This is the time neccessary to reset + * the stepper controll chip. (see datasheet for more detail). + */ +#define STEPPER_RESET_DELAY 1 + +/* + * Pins define for each stepper + */ +#define STEPPER_1_CW_CCW_PIN 0 +#define STEPPER_1_HALF_FULL_PIN 0 +#define STEPPER_1_CONTROL_PIN 0 +#define STEPPER_1_ENABLE_PIN 0 +#define STEPPER_1_RESET_PIN 0 + +/* put here other stepper motor */ + +#define STEPPER_1_SET do { /* Implement me! */ } while(0) +/* add here the set for other stepper motor */ + +#define STEPPER_1_CLEAR do { /* Implement me! */ } while(0) +/* add here the clear for other stepper motor */ + +/* + * Generic macro definition + */ + +/* + * Stepper init macro + */ +#define STEPPER_PIN_INIT_MACRO(port, index) do { \ + /* Add here init pin code */ \ + } while (0) + +/* + * Stepper commands macros + */ +#define STEPPER_SET_CW(index) do { /* Implement me! */ } while (0) +#define STEPPER_SET_CCW(index) do { /* Implement me! */ } while (0) +#define STEPPER_SET_HALF(index) do { /* Implement me! */ } while (0) +#define STEPPER_SET_FULL(index) do { /* Implement me! */ } while (0) +#define STEPPER_SET_CONTROL_LOW(index) do { /* Implement me! */ } while (0) +#define STEPPER_SET_CONTROL_HIGHT(index) do { /* Implement me! */ } while (0) +#define STEPPER_SET_ENABLE(index) do { /* Implement me! */ } while (0) +#define STEPPER_SET_DISABLE(index) do { /* Implement me! */ } while (0) +#define STEPPER_SET_RESET_ENABLE(index) do { /* Implement me! */ } while (0) +#define STEPPER_SET_RESET_DISABLE(index) do { /* Implement me! */ } while (0) + + +/* + * Reset stepper macro + */ + +#define STEPPER_RESET_MACRO(index) do { \ + STEPPER_SET_RESET_ENABLE(index); \ + timer_udelay(STEPPER_RESET_DELAY); \ + STEPPER_SET_RESET_DISABLE(index); \ + } while (0) + +/* + * Set half or full step macro + */ +#define STEPPER_SET_STEP_MODE_MACRO(index, flag) do { \ + if (flag) \ + STEPPER_SET_HALF(index); \ + else \ + STEPPER_SET_FULL(index); \ + } while (0) + +/* + * Set control status macro + */ +#warning TODO: This macro is not implemented (see below) + +#define STEPPER_SET_CONTROL_BIT_MACRO(index, flag) do { \ + /* if (flag) */ \ + /* WARNING This macros not implemented */ \ + /* else */ \ + /* WARNING This macros not implemented */ \ + } while (0) + +/* + * Set current power macro + */ +#warning TODO: This macro is not implemented (see below) + +#define STEPPER_SET_POWER_CURRENT_MACRO(index, flag) do { \ + /* if (flag) */ \ + /* WARNING This macrois not implemented */ \ + /* else */ \ + /* WARNING This macrois not implemented */ \ + } while (0) + +/* + * Set rotation of stepper motor + * - dir = 1: positive rotation + * - dir = 0: no motor moviment + * - dir = -1: negative rotation + * + */ +#define STEPPER_SET_DIRECTION_MACRO(index, dir) do { \ + switch (dir) \ + { \ + case 1: \ + STEPPER_SET_CW(index); \ + break; \ + case -1: \ + STEPPER_SET_CCW(index); \ + break; \ + case 0: \ + break; \ + } \ + } while (0) + + +/* + * Define macros for manage low level of stepper. + */ + +#define STEPPER_INIT() do { \ + STEPPER_PIN_INIT_MACRO(A, 1); \ + /* Add here code for other stepper motor */ \ + } while (0) + + +/* + * Enable select stepper motor + */ +#define STEPPER_ENABLE(index) do { \ + switch (index) \ + { \ + case 1: \ + STEPPER_SET_ENABLE(1); \ + break; \ + /* Add here code for other stepper motor */ \ + } \ + } while (0) + +/* + * Enable all stepper connect to micro + */ +#define STEPPER_ENABLE_ALL() do { \ + STEPPER_SET_ENABLE(1); \ + /* Add here code for other stepper motor */ \ + } while (0) + +/* + * Disable select stepper motor + */ +#define STEPPER_DISABLE(index) do { \ + switch (index) \ + { \ + case 1: \ + STEPPER_SET_DISABLE(1); \ + break; \ + /* Add here code for other stepper motor */ \ + } \ + } while (0) + +/* + * Disable all stepper connect to micro + */ +#define STEPPER_DISABLE_ALL() do { \ + STEPPER_SET_DISABLE(1); \ + /* Add here code for other stepper motor */ \ + } while (0) + +/* + * Reset selected stepper motor + */ +#define STEPPER_RESET(index) do { \ + switch (index) \ + { \ + case 1: \ + STEPPER_RESET_MACRO(1); \ + break; \ + /* Add here code for other stepper motor */ \ + } \ + } while (0) + +/* + * Reset all stepper motor + */ +#define STEPPER_RESET_ALL() do { \ + STEPPER_RESET_MACRO(1) \ + /* Add here code for other stepper motor */ \ + } while (0) + +// Set half/full step macros +#define STEPPER_SET_HALF_STEP(index, flag) do { \ + switch (index) \ + { \ + case 1: \ + STEPPER_SET_STEP_MODE_MACRO(1, flag); \ + break; \ + /* Add here code for other stepper motor */ \ + } \ + } while (0) + + +// Control status +#define STEPPER_SET_CONTROL_BIT(index, flag) do { \ + switch (index) \ + { \ + case 1: \ + STEPPER_SET_CONTROL_BIT_MACRO(1, flag); \ + break; \ + /* Add here code for other stepper motor */ \ + } \ + } while (0) + + +// Set stepper power current +#define STEPPER_SET_POWER_CURRENT(index, flag) do { \ + switch (index) \ + { \ + case 1: \ + STEPPER_SET_POWER_CURRENT_MACRO(1, flag); \ + break; \ + /* Add here code for other stepper motor */ \ + } \ + } while (0) + +// Set rotation dirction of stepper motor +#define STEPPER_SET_DIRECTION(index, dir) do { \ + switch (index) \ + { \ + case 1: \ + STEPPER_SET_DIRECTION_MACRO(1, dir); \ + break; \ + /* Add here code for other stepper motor */ \ + } \ + } while (0) + +#endif /* HW_STEPPER_H */ + + diff --git a/rmslog/hw/hw_tas5706a.h b/rmslog/hw/hw_tas5706a.h new file mode 100644 index 0000000..fda85e1 --- /dev/null +++ b/rmslog/hw/hw_tas5706a.h @@ -0,0 +1,64 @@ +/** + * \file + * + * + * \brief HW pin handling. + * + * + * \author Francesco Sacchi + */ + +#ifndef HW_TAS5706A_H +#define HW_TAS5706A_H + +#include + +#warning FIXME: This is an example implementation, you must implement it + +#define TAS5706A_SETPOWERDOWN(val) do { (void) val; /* implement me */ } while (0) +#define TAS5706A_SETRESET(val) do { (void) val; /* implement me */ } while (0) +#define TAS5706A_SETMUTE(val) do { (void) val; /* implement me */ } while (0) + +#define TAS5706A_PIN_INIT() \ + do { \ + TAS5706A_SETPOWERDOWN(true); \ + TAS5706A_SETRESET(true); \ + TAS5706A_SETMUTE(true); \ + /* complete me */ \ + } while (0) + +#define TAS5706A_MCLK_INIT() \ + do { \ + /* implement me */ \ + } while(0) + + +#endif /* HW_TAS5706A_H */ diff --git a/rmslog/hw/hw_thermo.h b/rmslog/hw/hw_thermo.h new file mode 100644 index 0000000..3bb4735 --- /dev/null +++ b/rmslog/hw/hw_thermo.h @@ -0,0 +1,181 @@ +/** + * \file + * + * + * \brief thermo hardware-specific control functions. + * + * \author Francesco Sacchi + * + */ + +#ifndef HW_THERMO_H +#define HW_THERMO_H + +#include "thermo_map.h" +#include "ntc_map.h" + +#include +#include + +#include +#include + +#warning TODO:This is an example implentation, you must implement it! + +/*! + * This function should return the temperature set tolerance. + */ +INLINE deg_t thermo_hw_tolerance(ThermoDev dev) +{ + ASSERT(dev < THERMO_CNT); + + switch (dev) + { + case THERMO_TEST: + /* Put here convertion function to temperature size */ + break; + + /* Put here your thermo device */ + + default: + ASSERT(0); + } + + return 0; +} + + +/*! + * This function should return the timeout for reaching the + * target temperature. + */ +INLINE ticks_t thermo_hw_timeout(ThermoDev dev) +{ + ASSERT(dev < THERMO_CNT); + + switch (dev) + { + case THERMO_TEST: + /* return ms_to_ticks(60000); */ + break; + + /* Put here a time out for select thermo device */ + + default: + ASSERT(0); + } + + return 0; +} + + + +/*! + * Read the temperature of the hw device \a dev. + */ +INLINE deg_t thermo_hw_read(ThermoDev dev) +{ + return ntc_read(dev); +} + + +/*! + * Turns off a specific device. + * This function is usefull to handle errors. + */ +INLINE void thermo_hw_off(ThermoDev dev) +{ + ASSERT(dev < THERMO_CNT); + + switch (dev) + { + case THERMO_TEST: + phase_setPower(TRIAC_TEST, 0); + break; + + /* Put here a thermo device to turn off */ + + default: + ASSERT(0); + } + +} + + +/*! + * Based on the current temperature \a cur_temp and the target temperature \a target, this function turns on and off specific + * triac channel and handles the freezer alarm. + * It may use also PID control for thermo-regolations. + */ +INLINE void thermo_hw_set(ThermoDev dev, deg_t target, deg_t cur_temp) +{ + ASSERT(dev < THERMO_CNT); + + deg_t dist = target - cur_temp; + //kprintf("dev[%d], dist[%d]\n", dev, dist); + + switch(dev) + { + case THERMO_TEST: + if (dist > 0) + { + /* phase_setPower(TRIAC_TEST, dist * PID_TEST_K); */ + } + else + { + /* phase_setPower(TRIAC_TEST, 0); */ + } + break; + + /* Put here an other thermo device */ + + default: + ASSERT(0); + } +} + + +#define THERMO_HW_INIT _thermo_hw_init() + +/*! + * Init hw associated with thermo-control. + */ +INLINE void _thermo_hw_init(void) +{ + ASSERT(phase_initialized); + ASSERT(ntc_initialized); + + phase_setPower(TRIAC_TEST, 0); + + /* Add here the other thermo device */ +} + +#endif /* HW_THERMO_H */ diff --git a/rmslog/hw/hw_tlv5618.h b/rmslog/hw/hw_tlv5618.h new file mode 100644 index 0000000..4a2b420 --- /dev/null +++ b/rmslog/hw/hw_tlv5618.h @@ -0,0 +1,69 @@ +/** + * \file + * + * + * \brief TLV5816 DAC hardware-specific definitions + * + * + * \author Francesco Sacchi + */ + +#ifndef HW_TLV5816_H +#define HW_TLV5816_H + +#warning TODO:This is an example implementation, you must implement it! + +#define TLV5618_CSINIT(pin) \ +do \ +{ \ + (void)pin; \ + /* Implement me! */ \ + TLV5618_CSHIGH(pin); \ +} while(0) + +#define TLV5618_CSLOW(pin) \ +do \ +{ \ + (void)pin; \ + /* Implement me! */ \ +} while(0) + + +#define TLV5618_CSHIGH(pin) \ +do \ +{ \ + (void)pin; \ + /* Implement me! */ \ +} while(0) + + +#endif /* HW_TLV5816_H */ + diff --git a/rmslog/hw/hw_tmp123.h b/rmslog/hw/hw_tmp123.h new file mode 100644 index 0000000..adb1858 --- /dev/null +++ b/rmslog/hw/hw_tmp123.h @@ -0,0 +1,52 @@ +/** + * \file + * + * + * \brief Hardware macro definition. + * + * \author Daniele Basile + */ + +#ifndef HW_TMP123_H +#define HW_TMP123_H + +#warning TODO:This is an example implentation, you must implement it! + +#define TMP123_HW_CS_EN() /* Implement me! */ +#define TMP123_HW_CS_DIS() /* Implement me! */ + +#define TMP123_HW_INIT() \ + do { \ + /* Pin init */\ + } while (0) + +#endif /* HW_TMP123_H */ + diff --git a/rmslog/hw/kbd_map.h b/rmslog/hw/kbd_map.h new file mode 100644 index 0000000..15e4f08 --- /dev/null +++ b/rmslog/hw/kbd_map.h @@ -0,0 +1,70 @@ +/** + * \file + * + * + * \brief Keyboard map definitions. + * + * + * \author Francesco Sacchi + * \author Stefano Fedrigo + */ + +#ifndef HW_KBD_MAP_H +#define HW_KBD_MAP_H + +#include + +#warning TODO:This is an example implentation, you must implement it! + + +/** + * Type for keyboard mask. + */ +typedef uint16_t keymask_t; + +/** + * \name Keycodes. + */ +/*@{*/ +#define K_UP BV(0) +#define K_DOWN BV(1) +#define K_OK BV(2) +#define K_CANCEL BV(3) + +#define K_REPEAT BV(13) /**< This is a repeated keyevent. */ +#define K_TIMEOUT BV(14) /**< Fake key event for timeouts. */ +#define K_LONG BV(15) +/*@}*/ + +#define K_LNG_MASK 0 + +#endif /* HW_KBD_MAP_H */ diff --git a/rmslog/hw/mcp41_map.h b/rmslog/hw/mcp41_map.h new file mode 100644 index 0000000..b2d223c --- /dev/null +++ b/rmslog/hw/mcp41_map.h @@ -0,0 +1,58 @@ +/** + * \file + * + * + * \brief MCP41 digital potentiometer map definitions. + * + * + * \author Francesco Sacchi + */ + +#ifndef MCP41_MAP_H +#define MCP41_MAP_H + +#warning TODO:This is an example implentation, you must implement it! + +/** \name Enum for mcp41 pot evices. + * \{ + * + */ +typedef enum Mcp41Dev +{ + MCP41_LED, + + /* put here other mcp41 device */ + + MCP41_CNT, +} Mcp41Dev; +/* \} */ + +#endif /* MCP41_MAP_H */ diff --git a/rmslog/hw/ntc_map.h b/rmslog/hw/ntc_map.h new file mode 100644 index 0000000..6d256be --- /dev/null +++ b/rmslog/hw/ntc_map.h @@ -0,0 +1,60 @@ +/** + * \file + * + * + * \brief NTC map definitions. + * + * + * \author Giovanni Bajo + * \author Francesco Sacchi + */ + +#ifndef NTC_MAP_H +#define NTC_MAP_H + +#include + +#warning TODO:This is an example implentation, you must implement it! + +/*! \name Enum for ntc devices. + * \{ + */ +typedef enum NtcDev +{ + NTC_TEST, + + /* Put here your thermo device */ + + NTC_CNT +} NtcDev; +/* \} */ + +#endif /* NTC_MAP_H */ diff --git a/rmslog/hw/phase_map.h b/rmslog/hw/phase_map.h new file mode 100644 index 0000000..185a36f --- /dev/null +++ b/rmslog/hw/phase_map.h @@ -0,0 +1,57 @@ +/** + * \file + * + * + * \brief Triac map definitions. + * + * + * \author Francesco Sacchi + */ + +#ifndef PHASE_MAP_H +#define PHASE_MAP_H + +#warning TODO:This is an example implentation, you must implement it! + +/*! \name Enum for triac devices. + * \{ + */ +typedef enum TriacDev +{ + TRIAC_TEST, + + /* Put here other triac device */ + + TRIAC_CNT +} TriacDev; +/* \} */ + +#endif /* PHASE_MAP_H */ diff --git a/rmslog/hw/pwm_map.h b/rmslog/hw/pwm_map.h new file mode 100644 index 0000000..634f3ec --- /dev/null +++ b/rmslog/hw/pwm_map.h @@ -0,0 +1,60 @@ +/** + * \file + * + * + * + * \brief PWM map device. + * + * + * \author Daniele Basile + */ + +#ifndef HW_PWM_MAP_H +#define HW_PWM_MAP_H + +#warning TODO:This is an example implentation, you must implement it! + +typedef enum +{ + PWM_CH0 = 0, + PWM_CH1, + PWM_CH2, + PWM_CH3, + +/* + * add other PWM channel or + * change above. + */ + + PWM_CNT +} PwmDev; + +#endif /* HW_PWM_MAP_H */ diff --git a/rmslog/hw/thermo_map.h b/rmslog/hw/thermo_map.h new file mode 100644 index 0000000..beaa39b --- /dev/null +++ b/rmslog/hw/thermo_map.h @@ -0,0 +1,69 @@ +/** + * \file + * + * + * \brief Thermo regulation control map definitions. + * + * + * \author Francesco Sacchi + */ + +#ifndef THERMO_MAP_H +#define THERMO_MAP_H + +#include +#include + +#warning TODO:This is an example implentation, you must implement it! + +typedef uint8_t thermostatus_t; + +#define THERMO_OFF 0 +#define THERMO_HEATING BV(0) +#define THERMO_FREEZING BV(1) +#define THERMO_TGT_REACH BV(2) +#define THERMOERRF_NTCSHORT BV(3) +#define THERMOERRF_NTCOPEN BV(4) +#define THERMOERRF_TIMEOUT BV(5) +#define THERMO_ACTIVE BV(6) + +#define THERMO_ERRMASK (THERMOERRF_NTCSHORT | THERMOERRF_NTCOPEN | THERMOERRF_TIMEOUT) + +typedef enum ThermoDev +{ + THERMO_TEST, + + /* Put here your thermo device */ + + THERMO_CNT, +} ThermoDev; + +#endif /* THERMO_MAP_H */ diff --git a/rmslog/main.c b/rmslog/main.c new file mode 100644 index 0000000..663386f --- /dev/null +++ b/rmslog/main.c @@ -0,0 +1,122 @@ +/** + * \file + * + * + * \author Andrea Righi + * + * \brief Kernel project. + * + * This is a minimalist kernel project: it just initializes the hardware and + * creates an independent process to blink an LED, while the main loop + * continues to monitor the stack utilization of all the processes. + */ + +#include "hw/hw_led.h" + +#include + +#include +#include + +#include +#include + +#include +#include + +static Serial out; + +static void init(void) +{ + /* Enable all the interrupts */ + IRQ_ENABLE; + + /* Initialize debugging module (allow kprintf(), etc.) */ + kdbg_init(); + /* Initialize system timer */ + timer_init(); + /* + * XXX: Arduino has a single UART port that was previously + * initialized for debugging purpose. + * In order to activate the serial driver you should disable + * the debugging module. + */ +#if 0 + /* Initialize UART0 */ + ser_init(&out, SER_UART0); + /* Configure UART0 to work at 115.200 bps */ + ser_setbaudrate(&out, 115200); +#else + (void)out; +#endif + /* Initialize LED driver */ + LED_INIT(); + + /* + * Kernel initialization: processes (allow to create and dispatch + * processes using proc_new()). + */ + proc_init(); +} + +static void NORETURN led_process(void) +{ + int i; + + /* Periodically blink the led (toggle each 100 ms) */ + for (i = 0; ; i = !i) + { + if (i) + LED_ON(); + else + LED_OFF(); + timer_delay(100); + } +} + +int main(void) +{ + /* Hardware initialization */ + init(); + + /* Create a new child process */ + proc_new(led_process, NULL, KERN_MINSTACKSIZE * 2, NULL); + + /* + * The main process is kept to periodically report the stack + * utilization of all the processes (1 probe per second). + */ + while (1) + { + monitor_report(); + timer_delay(1000); + } +} diff --git a/rmslog/rmslog.mk b/rmslog/rmslog.mk new file mode 100644 index 0000000..ff0f055 --- /dev/null +++ b/rmslog/rmslog.mk @@ -0,0 +1,90 @@ +# +# Wizard autogenerated makefile. +# DO NOT EDIT, use the rmslog_user.mk file instead. +# + +# Constants automatically defined by the selected modules +rmslog_DEBUG = 1 + +# Our target application +TRG += rmslog + +rmslog_PREFIX = "/usr/bin/avr-" + +rmslog_SUFFIX = "" + +rmslog_SRC_PATH = rmslog + +rmslog_HW_PATH = rmslog + +# Files automatically generated by the wizard. DO NOT EDIT, USE rmslog_USER_CSRC INSTEAD! +rmslog_WIZARD_CSRC = \ + bertos/mware/event.c \ + bertos/kern/sem.c \ + bertos/kern/monitor.c \ + bertos/struct/heap.c \ + bertos/io/kfile.c \ + bertos/mware/formatwr.c \ + bertos/cpu/avr/drv/timer_avr.c \ + bertos/drv/timer.c \ + bertos/kern/signal.c \ + bertos/kern/proc.c \ + bertos/cpu/avr/drv/ser_avr.c \ + bertos/drv/ser.c \ + bertos/mware/hex.c \ + # + +# Files automatically generated by the wizard. DO NOT EDIT, USE rmslog_USER_PCSRC INSTEAD! +rmslog_WIZARD_PCSRC = \ + bertos/mware/formatwr.c \ + # + +# Files automatically generated by the wizard. DO NOT EDIT, USE rmslog_USER_CPPASRC INSTEAD! +rmslog_WIZARD_CPPASRC = \ + bertos/cpu/avr/hw/switch_ctx_avr.S \ + # + +# Files automatically generated by the wizard. DO NOT EDIT, USE rmslog_USER_CXXSRC INSTEAD! +rmslog_WIZARD_CXXSRC = \ + \ + # + +# Files automatically generated by the wizard. DO NOT EDIT, USE rmslog_USER_ASRC INSTEAD! +rmslog_WIZARD_ASRC = \ + \ + # + +rmslog_CPPFLAGS = -D'CPU_FREQ=(16000000UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -I$(rmslog_HW_PATH) -I$(rmslog_SRC_PATH) $(rmslog_CPU_CPPFLAGS) $(rmslog_USER_CPPFLAGS) + +# Automatically generated by the wizard. PLEASE DO NOT EDIT! +rmslog_LDFLAGS = $(rmslog_CPU_LDFLAGS) $(rmslog_WIZARD_LDFLAGS) $(rmslog_USER_LDFLAGS) + +# Automatically generated by the wizard. PLEASE DO NOT EDIT! +rmslog_CPPAFLAGS = $(rmslog_CPU_CPPAFLAGS) $(rmslog_WIZARD_CPPAFLAGS) $(rmslog_USER_CPPAFLAGS) + +# Automatically generated by the wizard. PLEASE DO NOT EDIT! +rmslog_CSRC = $(rmslog_CPU_CSRC) $(rmslog_WIZARD_CSRC) $(rmslog_USER_CSRC) + +# Automatically generated by the wizard. PLEASE DO NOT EDIT! +rmslog_PCSRC = $(rmslog_CPU_PCSRC) $(rmslog_WIZARD_PCSRC) $(rmslog_USER_PCSRC) + +# Automatically generated by the wizard. PLEASE DO NOT EDIT! +rmslog_CPPASRC = $(rmslog_CPU_CPPASRC) $(rmslog_WIZARD_CPPASRC) $(rmslog_USER_CPPASRC) + +# Automatically generated by the wizard. PLEASE DO NOT EDIT! +rmslog_CXXSRC = $(rmslog_CPU_CXXSRC) $(rmslog_WIZARD_CXXSRC) $(rmslog_USER_CXXSRC) + +# Automatically generated by the wizard. PLEASE DO NOT EDIT! +rmslog_ASRC = $(rmslog_CPU_ASRC) $(rmslog_WIZARD_ASRC) $(rmslog_USER_ASRC) + +# CPU specific flags and options, defined in the CPU definition files. +# Automatically generated by the wizard. PLEASE DO NOT EDIT! +rmslog_MCU = atmega328p +rmslog_CPU_CPPFLAGS = -Os -Ibertos/cpu/avr/ +rmslog_PROGRAMMER_CPU = atmega328p +rmslog_STOPFLASH_SCRIPT = bertos/prg_scripts/avr/stopflash.sh +rmslog_STOPDEBUG_SCRIPT = bertos/prg_scripts/none.sh +rmslog_DEBUG_SCRIPT = bertos/prg_scripts/nodebug.sh +rmslog_FLASH_SCRIPT = bertos/prg_scripts/avr/flash.sh + +include $(rmslog_SRC_PATH)/rmslog_user.mk diff --git a/rmslog/rmslog_user.mk b/rmslog/rmslog_user.mk new file mode 100644 index 0000000..0168e73 --- /dev/null +++ b/rmslog/rmslog_user.mk @@ -0,0 +1,43 @@ +# +# User makefile. +# Edit this file to change compiler options and related stuff. +# + +# Programmer interface configuration, see http://dev.bertos.org/wiki/ProgrammerInterface for help +rmslog_PROGRAMMER_TYPE = none +rmslog_PROGRAMMER_PORT = none + +# Files included by the user. +rmslog_USER_CSRC = \ + $(rmslog_SRC_PATH)/main.c \ + # + +# Files included by the user. +rmslog_USER_PCSRC = \ + # + +# Files included by the user. +rmslog_USER_CPPASRC = \ + # + +# Files included by the user. +rmslog_USER_CXXSRC = \ + # + +# Files included by the user. +rmslog_USER_ASRC = \ + # + +# Flags included by the user. +rmslog_USER_LDFLAGS = \ + # + +# Flags included by the user. +rmslog_USER_CPPAFLAGS = \ + # + +# Flags included by the user. +rmslog_USER_CPPFLAGS = \ + -fno-strict-aliasing \ + -fwrapv \ + #