This document describes the installation procedure for
NetBSD1.5
on the
amiga
platform. It is available in four different formats titled
INSTALL.ext,
where
ext
is one of
.ps, .html, .more,
or .txt:
.ps.html.moremore(1)
and
less(1)
pager utility programs. This is the format in which the on-line
man
pages are generally presented.
.txtYou are reading the HTML version.
The
NetBSD
Operating System is a fully functional
Open Source
UNIX-like
operating system derived from the University of California, Berkeley
Networking Release 2 (Net/2), 4.4BSD-Lite, and 4.4BSD-Lite2 sources.
NetBSD
runs on thirty-one different system architectures featuring twelve distinct
families of CPUs, and is being ported to more. The
NetBSD1.5
release contains complete binary releases for fifteen different
machine types. (The sixteen remaining are not fully supported at this time
and are thus not part of the binary distribution. For information on
them, please see the
NetBSD
web site at
http://www.netbsd.org/)
NetBSD
is a completely integrated system.
In addition to its highly portable, high performance kernel,
NetBSD
features a complete set of user utilities, compilers for several
languages, the X Window System, firewall software
and numerous other tools, all accompanied by full source code.
NetBSD
is a creation of the members of the Internet community.
Without the unique cooperation and coordination the net makes
possible, it's likely that
NetBSD
wouldn't exist.
The
NetBSD1.5
release
provides numerous significant functional enhancements, including
support for many new devices, integration of hundreds of bug fixes,
new and updated kernel subsystems, and many userland enhancements. The
result of these improvements is a stable operating system fit for
production use that rivals most commercially available systems.
It is impossible to completely summarize over one year of
development that went into the
NetBSD1.5
release. Some highlights include:
As has been noted, there have also been innumerable bug fixes.
Kernel interfaces have continued to be refined, and more subsystems
and device drivers are shared among the different ports. You can look
for this trend to continue.
This is the seventh major release of
NetBSD
for the Amiga and DraCo line of computers.
New port-specific features include:
The
NetBSD
Foundation has been incorporated as a non-profit
organization. Its purpose is to encourage, foster and promote the
free exchange of computer software, namely the
NetBSD
Operating
System. The foundation will allow for many things to be handled more
smoothly than could be done with our previous informal organization.
In particular, it provides the framework to deal with other parties
that wish to become involved in the
NetBSD
Project.
The
NetBSD
Foundation will help improve the quality of
NetBSD
by:
We intend to begin narrowing the time delay between releases. Our
ambition is to provide a full release every six to eight months.
We hope to support even
more
hardware in the future, and we have a
rather large number of other ideas about what can be done to improve
NetBSD.
We intend to continue our current practice of making the
NetBSD-current development source available on a daily basis.
We intend to integrate free, positive changes from whatever sources
submit them, providing that they are well thought-out and increase the
usability of the system.
Above all, we hope to create a stable and accessible system, and to be
responsive to the needs and desires of
NetBSD
users, because it is for
and because of them that
NetBSD
exists.
Refer to
http://www.netbsd.org/Sites/net.html.
The root directory of the
NetBSD1.5
release is organized as follows:
In addition to the files and directories listed above, there is one
directory per architecture, for each of the architectures for which
NetBSD1.5
has a binary distribution.
There are also
The source distribution sets can be found in subdirectories of the
All the above source sets are located in the
The source sets are distributed as compressed tar files. They may be
unpacked into
The
The split distributions may be reassembled and extracted with
cat
as follows:
In each of the source distribution set directories, there are
files which contain the checksums of the files in the directory:
The MD5 digest is the safest checksum, followed by the POSIX
checksum. The other two checksums are provided only to ensure
that the widest possible range of system can check the integrity
of the release files.
NetBSD
maintains its own set of sources for the X Window System in order to
assure tight integration and compatibility.
These sources are based on XFree86, and tightly track XFree86 releases.
They are currently equivalent to XFree86 3.3.6.
Binary sets for the X Window system are distributed with
NetBSD.
The sets are:
The amiga binary distribution sets are distributed as gzipped tar files
named with the extension
.tgz, e.g.
The instructions given for extracting the source sets work equally
well for the binary sets, but it is worth noting that if you use that
method, the files are
NetBSD1.5
runs on any Amiga that has a 68020 or better CPU with
some form of MMU, and on 68060 DraCos.
For 68020 and 68030 systems, a FPU is recommended but not required for the
system utilities.
68LC040, 68040V and 68LC060 systems don't work correctly at the moment.
The minimal configuration requires 6 MB of RAM (not including CHIPMEM!)
and about 75 MB of disk space. To install the entire system requires
much more disk space, and to run X or compile the system, more RAM
is recommended. (6 MB of RAM will actually allow you to compile,
however it won't be speedy. X really isn't usable on a 6 MB system.)
Here is a table of recommended HD partition sizes for a full install:
Changes Since The Last Release
Kernel
ktruss(1).
swapctl(8).
Networking
pcap(3)
is incremented and you may need to recompile userland tools.
The KAME IPv6 part includes results from the unified-ipv6 effort.
File system
/)
on a RAID set.
rpc.lockd(8))
now works.
Security
sysctl(3)
interfaces to various elements of process and system information,
allowing programs such as
ps(1),
dmesg(1)
and the like to operate without recompilation after kernel upgrades,
and remove the necessity to run setgid kmem (thus improving system
security).
System administration and user tools
rc(8)
system startup and shutdown scripts to an
`rc.d'
mechanism, with separate control scripts for each service, and
appropriate dependency ordering provided by
rcorder(8).
postfix(1)
provided as alternative mail transport agent to
sendmail(8).
useradd(8),
usermod(8),
userdel(8),
groupadd(8),
groupmod(8),
and
groupdel(8)
added to the system.
/etc/login.conf)
from
BSD/OS.
at(1)
and
w(1).
ftpd(8)
providing features found in larger and less secure FTP daemons,
such as user classes, connection limits, improved support for
virtual hosting, transfer statistics, transfer rate throttling,
and support for various IETF ftpext working group extensions.
ftp(1)
client has been improved even further, including
transfer rate throttling, improved URL support, command line uploads.
See the man page for details.
Miscellaneous
/usr/share/misc/style)
to use ANSI C only (instead of K&R) and reflect current (best) practice,
and begin migrating the
NetBSD
source code to follow it.
curses(3)
library, including support for color.
file(1),
ipfilter(4),
ppp(4),
and
sendmail(8)
to the latest stable release.
The Future of NetBSD
Sources of NetBSD
NetBSD 1.5 Release Contents
.../NetBSD-1.5/
CHANGESLAST_MINUTEMIRRORSREADME.filesTODOpatches/source/README.export-control
files sprinkled liberally throughout the
distribution tree, which point out that there are some portions of the
distribution that may be subject to
export regulations of the United States, e.g.
code under
src/crypto
and
src/sys/crypto.
It is your responsibility
to determine whether or not it is legal for you to export these portions
and to act accordingly.
source
subdirectory of the distribution tree. They contain the
complete sources to the system. The source distribution sets
are as follows:
22.3 MB gzipped, 98.8 MB uncompressed
5.6 MB gzipped, 57.0 MB uncompressed
3.3 MB gzipped, 13.2 MB uncompressed
24.2 MB gzipped, 120.6 MB uncompressed
config(8),
and
dbsym(8).
17.6 MB gzipped, 88.6 MB uncompressed
35.2 MB gzipped, 176.8 MB uncompressed
source/sets
subdirectory of the distribution tree.
/usr/src
with the command:
#( cd / ; tar -zxpf - ) < set_name.tgz
sets/Split/
subdirectory contains split
versions of the source sets for those users who need to load the
source sets from floppy or otherwise need a split distribution. The
split sets are named
set_name.xx
where
set_name
is the distribution set name, and
xx
is the sequence number of the file,
starting with
``aa''
for the first file in the distribution set, then
``ab''
for the next, and so on. All of these files except the last one
of each set should be exactly 240,640 bytes long. (The last file is
just long enough to contain the remainder of the data for that
distribution set.)
# cat set_name.?? | ( cd / ; tar -zxpf - )
BSDSUMCKSUMMD5SYSVSUMNetBSD/amiga subdirectory structure
The amiga-specific portion of the
NetBSD1.5
release is found in the
amiga
subdirectory of the distribution:
.../NetBSD-1.5/amiga/
INSTALL.htmlINSTALL.psINSTALL.txtINSTALL.more.more file contains underlined text using the
more(1)
conventions for indicating italic and bold display.
binary/
kernel/
netbsd.GENERIC.gznetbsd.INSTALL.gznetbsd.INSTWDCPCM.gzsets/installation/
floppy/miniroot/misc/Miniroot file system
The Amiga now uses a single miniroot file system for both an initial
installation and for an upgrade. A gzipped version is available, for easier
downloading. (The gzipped version has the
.gz
extension added to
their names.)
miniroot.fs/
(root) and
/usr
partitions and getting ready to extract (and possibly first
fetching) the distribution sets. There is enough on this file
system to allow you to make a SLIP or PPP connection, configure
an Ethernet, mount an NFS file system or ftp. You can also load
distribution sets from a SCSI tape or from one of your existing
AmigaDOS
partitions.
Binary distribution sets
The
NetBSD
amiga
binary distribution sets contain the binaries which
comprise the
NetBSD1.5
release for the amiga. There are eight binary distribution sets.
The binary distribution sets can be found in the
amiga/binary/sets
subdirectory
of the
NetBSD1.5
distribution tree, and are as follows:
15.6 MB gzipped, 41.4 MB uncompressed
/usr/include)
and the various system libraries (except the shared
libraries, which are included as part of the
base
set). This set also includes the manual pages for
all of the utilities it contains, as well as the
system call and library manual pages.
11.8 MB gzipped, 39.5 MB uncompressed
/etc
and in several other places. This set
must
be installed if you are installing the system from scratch, but should
not
be used if you are upgrading. (If you are upgrading,
it's recommended that you get a copy of this set and
carefully
upgrade your configuration files by hand.)
0.1 MB gzipped, 0.6 MB uncompressed
3.0 MB gzipped, 7.4 MB uncompressed
GENERIC
kernel, named
/netbsd.
You must
install this distribution set.
1.1 MB gzipped, 2.4 MB uncompressed
5.0 MB gzipped, 19.9 MB uncompressed
/usr/share.
2.6 MB gzipped, 10.1 MB uncompressed
groff(1),
all related programs, and their manual pages.
1.3 MB gzipped, 4.7 MB uncompressed
2.6 MB gzipped, 8.2 MB uncompressed
1.7 MB gzipped, 7.2 MB uncompressed
0.2 MB gzipped, 0.7 MB uncompressed
6.2 MB gzipped, 7.5 MB uncompressed
1.6 MB gzipped, 3.9 MB uncompressed
base.tgz.
/-relative
and therefore are extracted
below
the current directory. That
is, if you want to extract the binaries into your system, i.e.
replace the system binaries with them, you have to run the
tar -xpf
command from
/.
NetBSD/amiga System Requirements and Supported Devices
| Partition | Suggested | + X | Needed | + X |
| / (root) | 25 MB | 25 MB | 20 MB | 20 MB |
| /usr | 245 MB | 270 MB | 120 MB | 145 MB |
| /var | 20 MB | 20 MB | 5 MB | 5 MB |
| swap | 2*RAM below 32 MB, then up to you |
As you may note the recommended size of
/usr
is 125 MB greater than needed.
This is to leave room for a kernel source and compile tree as
you will probably want to compile your own kernel.
GENERIC
is large and bulky to accommodate all people.
For example, most people's machines have an FPU, so you do not need the
bulky FPU_EMULATE option.
Preconfigured or precompiled packages are installed below
/usr/pkg
by default.
You should either make
/usr
larger (if you intend to install a lot of them), make
/usr/pkg
an additional partition, use the
-p
option to
pkg_add
to install them in a different place, or link
/usr/pkg
to a different place.
If you only have less than 8 MB of fast memory, you should make your swap partition larger, as your system will be doing much more swapping. Especially: do not place it onto a old small (and normally slow) disk!
If its not on the above lists, there is no support for it in this
release. Especially (but this is an incomplete list), there are no
drivers for: Blizzard III SCSI option,
Ferret SCSI, Oktagon SCSI.
Installation is supported from several media types, including:
The steps necessary to prepare the distribution sets for installation depend upon which installation medium you choose. The steps for the various media are outlined below.
set_name.xx
pieces can be placed in a single directory instead of separate ones for each
distribution set.
This will also simplify the installation work later on.
Note where you place the files as you will need this later.
Once you have done this, you can proceed to the next step in the installation process, preparing your hard disk.
If your SCSI CD-ROM is connected to a supported SCSI host adapter, or it is an ATAPI cd-rom connected to the A1200/A4000 internal IDE connector, simply put the CD into the drive before installation.
Find out where the distribution set files are on the CD-ROM.
Proceed to the instruction on installation.
set_name.xx
files that make up the
distribution sets you want to install or upgrade.
You will need one sixth that number of 1.44 MB floppies.
Format all of the floppies with
MS-DOS.
Do
not
make any of them bootable
MS-DOS
floppies, i.e. don't use
Place all of the
Once you have the files on
MS-DOS
disks, you can proceed to the next step in the installation or upgrade process.
If you're installing
NetBSD
from scratch, go to the section on preparing your hard disk, below.
If you're upgrading an existing installation, go directly to the
section on upgrading.
Once you have this information, you can proceed to the next
step in the installation or upgrade process.
If you're installing
NetBSD
from scratch, go to the section on preparing your hard disk, below.
If you're upgrading an existing installation, go directly to
the section on upgrading.
You need to know the numeric IP address of the NFS server,
and, if the server is not on a network directly connected to
the machine on which you're installing or upgrading
NetBSD,
you need to know the numeric IP address of the router closest
to the
NetBSD
machine.
Finally, you need to know the numeric IP address of the
NetBSD
machine itself.
Once the NFS server is set up properly and you have the
information mentioned above, you can proceed to the next step
in the installation or upgrade process.
If you're installing
NetBSD
from scratch, go to the section on preparing your hard disk, below.
If you're upgrading an existing installation, go directly to the
section on upgrading.
If you're making the tape on a
UNIX-like
system, the easiest way
to do so is probably something like:
where
tape_device
is the name of the tape device that
describes the tape drive you're using; possibly
Once you have the files on the tape, you can proceed to the
next step in the installation or upgrade process.
If you're installing
NetBSD
from scratch, go to the section on preparing your hard disk, below.
If you're upgrading an existing installation, go directly to the section
on upgrading.
Place the distribution sets you wish to upgrade somewhere in
your current file system tree.
Please note that the
At a bare minimum, you must upgrade the
base
and
kern
binary distributions, and so must put the
base
and
kern
sets somewhere in your file system.
If you wish, you can do the other sets, as well, but you should
not
upgrade the
etc
distribution; it contains contains system configuration files
that you should review and update by hand.
Once you have done this, you can proceed to the next step in
the upgrade process, actually upgrading your system.
format /s
to format them.
(If the floppies are bootable, then the
MS-DOS
system files that make them bootable will take up some space, and you
won't be able to fit the distribution set parts on the disks.)
If you're using floppies that are formatted for
MS-DOS
by their manufacturers, they probably aren't bootable, and you can use
them out of the box.
set_name.xx
files on the
MS-DOS
disks.
204.152.184.75
(as of October, 2000).
/etc/exports
file on of the NFS server and resetting its mount daemon (mountd).
(Both of these actions will probably require superuser
privileges on the server.)
# tar -cf tape_device dist_directories
/dev/rst0,
or something similar, but it will vary from system to system.
(If you can't figure it out, ask your system administrator.)
In the above example,
dist_directories
are the
distribution sets' directories, for the distribution sets you
wish to place on the tape.
For instance, to put the
misc, base, and etc
distributions on tape (in
order to do the absolute minimum installation to a new disk),
you would do the following:
# cd .../NetBSD-1.5
# cd amiga/binary
# tar -cf tape_device misc etc kern
/dev
on the floppy used for upgrades only knows about
wd0,
wd1,
sd0,
sd1,
and
sd2.
If you have more than two IDE drives or more than three SCSI drives, you
should take care not to place the sets on the high numbered drives.
You will need an
AmigaDOS
hard drive prep tool to prepare your hard
drives for use with
NetBSD/amiga.
HDToolBox is provided with the
system software and on floppy installation disks since Release 2.0
of
AmigaDOS,
so we will provide instructions for its use.
Note that
NetBSD
can't currently be installed on disks with a sector
size other than 512 bytes (e.g.,
``640 MB''
90mm M-O media). You can, however,
mount ADOSFS partitions on such M-O's.
A full explanation of HDToolBox can be found with your
AmigaDOS
manuals and is beyond the scope of this document.
The first time you partition a drive, you need to set its drive
type so that you have working geometry parameters. To do this
you enter the
``Change drive type''
menu, and either use
``read parameters from drive''
or set them manually.
Note you will be modifying your HD's. If you mess something
up here you could lose everything on all the drives that
you configure. It is therefore advised that you:
What you need to do is partition your drives; creating at least
root, swap and
This should be done as the HDToolBox manual describes. One thing
to note is that if you are not using a Commodore controller you
will need to specify the device your SCSI controller uses, e.g.
if you have a Warp Engine you would:
The important things you need to do above and beyond normal
partitioning includes (from Partition Drive section):
To make the needed changes:
Here
`
Make sure you press
On the root
(
Mask and maxtransfer are not used with
NetBSD.
Once this is done
NetBSD/amiga
will be able to recognize your
disks and which partitions it should use.
Once the hard disk has been prepared for
NetBSD,
the miniroot file system
(
On
AmigaDOS,
the command:
where <swap partition> is the name you gave to the
NetBSD
partition to be used for swapping. If
xstreamtodev
is unable
to determine the SCSI driver device name or the unit number
of the specified partition, you may also need to include the
option
and/or
To transfer the miniroot using
NetBSD,
you should be booted up
in single user state on the current
NetBSD
system, or use the
shutdown now
command to shutdown to single-user state.
Then copy the miniroot using
dd:
where
Installing
NetBSD
is a relatively complex process, but, if you have
this document in hand and are careful to read and remember the
information which is presented to you by the install program, it
shouldn't be too much trouble.
Before you begin, you must have already prepared your hard disk as
detailed in the section on preparing your system for install.
The following is a walk-through of the steps necessary to get
NetBSD
installed on your hard disk. If you wish to stop the installation,
you may press
Transfer the miniroot file system onto the hard disk partition
used by
NetBSD
for swapping, as described in the "Preparing
your System for
NetBSD
Installation" section above.
Next you need to get yourself into
NetBSD
by loading the
kernel from
AmigaDOS
with
loadbsd
like so:
If you have an AGA machine, and your monitor will handle
the dblNTSC mode, you may also include the
-A
option to enable the dblNTSC display mode.
If your machine has a fragmented physical memory space, as,
e.g., DraCo machines, you should add the
-n2
option to enable the use of all memory segments.
If you have a M680x0 + PPC board, make sure the PPC cpu is inactive
before using loadbsd, else the kernel will hang!
[This description is for V40 (OS 3.1) ROMs. For older ROMs,
there might be small differences. Check your
AmigaDOS
documentation
to learn about the exact procedure.]
Using bootblocks may not work on some
systems, and may require a mountable file system on others.
Reboot your machine, holding down both mouse buttons if you
have a 2-button mouse, the outer mouse buttons if you have
a 3-button mouse. On the DraCo, press the left mouse button
instead, when the boot screen prompts you for it.
From the boot menu, select
Boot Options.
Select the swap partition with the miniroot, and then
ok.
Select
Boot now.
The machine will boot the bootblock, which
will prompt your for a command line. You have a few seconds time
to change the default. Entering an empty line will accept the default.
The bootblock uses command lines of the form:
use
If the system should hang after entering the root device, try
again with
This disables synchronous transfer on all SCSI devices.
The system should continue to boot. For now ignore
``WARNING''
messages about bad dates in clocks, and a warning about
The installer starts with a nice welcome messages. Read this
message carefully, it also informs you of the risks involved
in continuing! If you still want to go on, type
`y'.
The installer now continues by trying to figure out your disk
configuration. When it is done, you will be prompted to
select a root device from the list of disks it has found.
You should know at this point that the disks are
not
numbered according to their SCSI-ID! The
NetBSD
kernel numbers the SCSI
drives (and other devices on the SCSI bus) sequentially as it
finds them. The drive with the lowest SCSI-ID will be called
The installer will offer you to look at the
NetBSD
disk label of the disks at this point. You should do this, to find out
what partition letters the
NetBSD
kernel assigned to the partitions you created, and as a check whether the
disk number you are going to use is right.
you are now at the point of no return.
If you confirm that
you want to install
NetBSD,
your hard drive will be modified,
and perhaps its contents scrambled at the whim of the install
program. Type
At this time, you will need to tell the installer which partition
will be associated with the different file systems. Normally, you'll
want to add a partition for
The install program will now make the file systems you
specified. There should be only one error per file system in
this section of the installation. It will look like this:
If there are any others, restart from the beginning of
the installation process. This error is ok as the Amiga
does not write disklabels currently. You should expect
this error whenever using newfs.
The install will now ask you want to configure any network
information. It ill ask for the machine's host name, domain
name, and other network configuration information.
Since the network configuration might have lead to additional (nfs)
file system entries, you get another chance to modify your fstab.
You are finally at the point where some real data will be put on
your freshly made file systems. Select the device type you wish
to install from and off you go....
Some notes:
Next you will be asked to specify the timezone. Just select the
timezone you are in. The installer will make the correct setup
on your root file system
(
Be patient, this will take a while...
Next, the installer will copy your keymap settings to the new system.
After this, it will copy the kernel from the installation miniroot to
the newly installed / upgraded system.
If the installed system already has a kernel, it will ask you for
confirmation.
kern.tgz distribution set, this is an old kernel, and you should answer
"y" to install a working (although restricted) INSTALL kernel.
If you did install the kern.tgz kernel, you normally should answer "n".
(In both cases, if you used the INSTWDCPCM kernel for the installation, you
should replace the installed kernel by netbsd.INSTWDCPCM manually lateron,
and you need to use netbsd.INSTWDCPCM to run the system.)
Finally, the installer ask you if you want to install the bootblock
code on your root disk. This is a matter of personal choice and can
also be done from a running
NetBSD
system. See the
Once the installer is done, halt the system with the
halt
command
(wait for
or select the root partition
(
You need to do your final tweaks now. First mount your file systems
like so:
Your system is now complete but not completely configured; you
should adjust the
Once you are done with the rest of configuration unmount your file
systems and halt your system, then reboot:
Finally you can now boot your system and it will be completely
functional:
When it boots off of the hard drive, you will have a complete
NetBSD
system!
Congratulations! (You really deserve them!!!)
Once you've got the operating system running, there are a few
things you need to do in order to bring the system into a properly
configured state, with the most important ones described below.
If you or the installation software haven't done any configuration of
and with the root file system
(
If your
If you have
Other values that need to be set in
or, if you have
myname.my.dom
in
To enable proper hostname resolution, you will also want to add an
Other files in
After reboot, you can log in as
Use the
If you have installed the X window system, look at the files in
Don't forget to add
If you wish to install any of the software freely available for
UNIX-like
systems
you are strongly advised to first check the
NetBSD
package system. This automatically handles any changes necessary to
make the software run on
NetBSD,
retrieval and installation of any other packages on which the software
may depend, and simplifies installation (and deinstallation), both
from source and precompiled binaries.
After extracting, then see the
is likely to give you more information on these files.
The upgrade to
NetBSD1.5
is a binary upgrade; it can be quite difficult
to advance to a later version by recompiling from source due primarily
to interdependencies in the various components.
To do the upgrade, you must have the
NetBSD
kernel on
AmigaDOS
and you must transfer the miniroot file system
Since upgrading involves replacing the kernel, and most of the system
binaries, it has the potential to cause data loss. You are strongly
advised to BACK UP ANY IMPORTANT DATA ON YOUR DISK, whether on the
NetBSD
partition or on another operating system's partition, before
beginning the upgrade process.
To upgrade your system, follow the following instructions:
Transfer the miniroot file system onto the hard disk partition
used by
NetBSD
for swapping, as described in the "Preparing
your System for
NetBSD
Installation" section above.
Now boot up
NetBSD
using the 1.5 kernel using the loadbsd
command:
If you machine has a split memory space, like, e.g., DraCo
machines, use this instead:
If you have a M680x0 + PPC board, make sure the PPC cpu is inactive
before using loadbsd, else the kernel will hang!
Reboot your machine, holding down both mouse buttons if you
have a 2-button mouse, the outer mouse buttons if you have
a 3-button mouse. On the DraCo, press the left mouse button
instead, when the boot screen prompts you for it.
From the boot menu, select
Boot Options.
Select the swap partition with the miniroot, and then
ok. Select
Boot now.
The machine will boot the bootblock, which
will prompt your for a command line. You have a few seconds time
to change the default. Entering an empty line will accept the
default.
The bootblock uses command lines of the form:
file[ options]
where
file
is the kernel file name on the partition where the
boot block is on, and
options
are the same as with loadbsd.
E.g., instead of
use
You will be presented with some information about the upgrade
process and a warning message, and will be asked if you wish
to proceed with the upgrade process. If you answer
negatively, the upgrade process will stop, and your disk will
not be modified. If you answer affirmatively, the upgrade
process will begin, and your disk will be modified. You may press
You will now be greeted and reminded of the fact that this is a
potential dangerous procedure and that you should not upgrade the
etc
set.
When you decide to proceed, you will be prompted to enter
your root disk. After you've done this, it will be checked
automatically to make sure that the file system is in a sane
state before making any modifications. After this is done,
you will be asked if you want to configure your network.
You are now allowed to edit your fstab. Normally you don't have
to. Note that the upgrade-kit uses it's own copy of the fstab.
Whatever you do here
won't
affect your actual fstab.
After you are satisfied with your fstab, the upgrade-kit will check
all file systems mentioned in it. When they're ok, they will be
mounted.
You will now be asked if your sets are stored on a normally
mounted file system. You should answer
`y'
to this question if
you have the sets stored on a file system that was present in
the fstab. The actions you should take for the set extraction
are pretty logical (we think).
After you have extracted the sets, the upgrade kit will proceed
with setting the timezone and installing the kernel and bootcode.
This is all exactly the same as described in the installation
section.
Your system has now been upgraded to
NetBSD1.5.
After a new kernel has been copied to your hard disk, your
machine is a complete
NetBSD1.5
system. However, that
doesn't mean that you're finished with the upgrade process.
There are several things that you should do, or might have to
do, to insure that the system works properly.
You will probably want to get the
etc
distribution,
extract it, and compare its contents with those in your
You will want to delete old binaries that were part
of the version of
NetBSD
that you upgraded from and have since
been removed from the
NetBSD
distribution. If upgrading from a
NetBSD
version older than 1.0, you might also want to
recompile any locally-built binaries, to take advantage of the
shared libraries. (Note that any new binaries that you build
will be dynamically linked, and therefore take advantage of
the shared libraries, by default. For information on how to
make statically linked binaries, see the
Users upgrading from previous versions of
NetBSD
may wish to bear the
following problems and compatibility issues in mind when upgrading to
NetBSD1.5.
In previous releases of
NetBSD,
At system startup,
At system shutdown,
Local and third-party scripts may be installed into
Previous releases of
NetBSD
disabled a feature of
Due to
Documentation is available if you first install the manual
distribution set. Traditionally, the
``man pages''
(documentation) are denoted by
`
The section numbers group the topics into several categories, but three
are of primary interest: user commands are in section 1, file formats
are in section 5, and administrative information is in section 8.
The man
command is used to view the documentation on a topic, and is
started by entering
man[ section]
topic.
The brackets
[]
around the
section should not be entered, but rather indicate that the section is
optional. If you don't ask for a particular section, the topic with the
lowest numbered section name will be displayed. For instance, after
logging in, enter
to read the documentation for
instead.
If you are unsure of what man page you are looking for, enter
apropos subject-word
where
subject-word
is your topic of interest; a list of possibly
related man pages will be displayed.
If you've got something to say, do so! We'd like your input.
There are various mailing lists available via the mailing list
server at
majordomo@netbsd.org.
To get help on using the mailing
list server, send mail to that address with an empty body, and it will
reply with instructions.
There are various mailing lists set up to deal with comments and
questions about this release. Please send comments to:
netbsd-comments@netbsd.org.
To report bugs, use the
Use of
There are also port-specific mailing lists, to discuss aspects of
each port of
NetBSD.
Use majordomo to find their addresses, or visit
http://www.netbsd.org/MailingLists/.
If
you're interested in doing a serious amount of work on a specific
port, you probably should contact the
`owner'
of that port (listed
below).
If you'd like to help with this effort, and have an idea as to how
you could be useful, send us mail or subscribe to:
netbsd-help@netbsd.org.
As a favor, please avoid mailing huge documents or files to these
mailing lists. Instead, put the material you would have sent up
for FTP or WWW somewhere, then mail the appropriate list about it, or, if
you'd rather not do that, mail the list saying you'll send the data
to those who want it.
for their ongoing work on
BSD
systems, support, and encouragement.
for answering lots of questions, fixing bugs, and doing the various work
they've done.
(in alphabetical order)
Preparing your hard disk with HDToolBox
/usr
partitions and possibly at least one more for
/usr/local
if you have the space.
hdtoolbox warpdrive.device
SCSI_DEVICE_NAME=warpdrive.device
/),
if you want to boot
NetBSD
directly, or the swap partition, if you want
to boot the installation miniroot directly.
root partition : 0x4e425207
swap partition : 0x4e425301
other partitions: 0x4e425507
other'
refers to other partitions you will
format for reading and writing under
NetBSD
(e.g.
/usr)
RETURN
to enter this value as some versions of HDToolBox will forget your entry
if you don't.
/)
(and, for installation, swap) partition,
set instead this:
Transferring the miniroot file system
The
NetBSD/amiga
installation or upgrade now uses a
miniroot
file system which is installed on the partition used by
NetBSD
for swapping. This removes the requirement of using a floppy
disk for the file system used by the installation or upgrade
process. It also allows more utilities to be present on the
file system than would be available when using an 880 KB floppy
disk.
miniroot.fs)
is transferred to the swap
partition configured during the hard disk prep (or the existing
swap partition in the case of an upgrade). The xstreamtodev
utility provided in the
amiga/installation/misc
directory can
be used on
AmigaDOS
to transfer the file system for either a new
installation or an upgrade. The file system can also be
transferred on an existing
NetBSD
system for an update by
using dd. This should only be done after booting
NetBSD
into single-user state. It may also be possible to shutdown
to single-user, providing that the single-user state processes
are not using the swap partition.
xstreamtodev --input=miniroot.fs --rdb-name=<swap partition>
--device=<driver.name>
--unit=<SCSI unit number>
dd if=miniroot.fs of=/dev/rsd0b
/dev/rsd0b
should be the device path of the swap partition
your system is configured to use. Once the file is copied,
reboot back to
AmigaDOS
to boot the upgrade kernel.
miniroot.fs
on the swap partition.
Installing the NetBSD System
CONTROL-C
at any prompt, but if you do, you'll have to
begin again from scratch.
Booting from AmigaDOS, using loadbsd
You then need to have
ixemul.library
in your
LIBS:
directory on
AmigaDOS.
You also need to have the
loadbsd
program in your command path. If
AmigaDOS
complains about loadbsd not being an executable file, be sure that the
Execute
protection bit is set. If not, set it with the command:
Protect loadbsd add e
loadbsd -b netbsd
Directly booting
NetBSD,
with boot blocks installed
file[ options]
where file
is the kernel file name on the partition where the
boot block is on, and
[options]
are the same as with loadbsd.
E.g., instead of
loadbsd -bsSn2 netbsd
netbsd -bsSn2
Once your kernel boots
You should see the screen clear and some information about
your system as the kernel configures the hardware. Note which
hard disk device(s) are configured
etc.
(sd0, sd1,)
Then you will be prompted for a root device. At this time type
sd0b,
where
sd0
is the device which contains the swap
partition you created during the hard disk preparation.
When prompted for a dump device, answer
`none'
for the install
(normally, you would tell it one of the swap devices). When
prompted for the root file system type, confirm
`generic',
which will auto-detect it.
loadbsd -I ff -b netbsd
/etc/rc
not existing. Eventually you will be be asked to enter the
pathname of the shell, just press
RETURN.
After a short while,
you will be asked to select the type of your keyboard. After
you have entered a valid response here, the system asks you if
you want to install or upgrade your system. Since you are
reading the
install
section,
`i'
would be the proper response here...
sd0,
the next one
sd1,
etc. Also, any Amiga internal IDE disk drives
will be configured as
``SCSI''
drives, and will be configured
before any
`real'
SCSI drives (if any are present).
Control-C
now
if you don't want this.
/usr,
at least.
rsdNc
or
sdNc
partitions for anything!
They are for access to the whole disk only and do
not
correspond to any Amiga partition!
newfs: ioctl (WDINFO): Invalid argument
newfs: /dev/rsd0a: can't rewrite disk label
nrst0).
Try
nrst0h,
nrst0m,
or
nrst0l
instead.
.'.
/).
After the timezone-link is installed,
the installer will proceed by creating the device nodes on your
root file system under
/dev.
installboot(8)
manual page about how to do this.
halted
to be displayed) and reboot. Then again boot
NetBSD
this time with the command:
loadbsd netbsd
/)
from the boot menu, and tell it to boot
netbsd -s
mount -av
/etc/sendmail.cf file as necessary to suit your
site. You should also examine and adjust the settings in
/etc/rc.conf.
You can use
vi(1)
or
ed(1)
to edit the files. If you installed the man pages
you can type
man vi or man ed
for instructions on how to use these somewhat non-intuitive editors.
# cd /
# umount -av
# halt
loadbsd -a netbsd
Post installation steps
/etc/rc.conf
/etc/rc.conf,
the system will drop you into single user mode on first reboot with the
message
/etc/rc.conf is not configured. Multiuser boot aborted.
/)
mounted read-write. When the system
asks you to choose a shell, simply press
RETURN
to get to a prompt. If you are asked for a terminal type, respond with
vt220
(or whatever is appropriate for your terminal type)
and press
RETURN.
At this point, you need to configure at least
one file in the
/etc
directory. Change to the
/etc
directory and take a look at the
/etc/rc.conf
file. Modify it to your tastes, making sure that you set
rc_configured=YES
so that your changes will be enabled and a multi-user boot can
proceed.
Default values for the various programs can be found in
/etc/defaults/rc.conf, where some in-line documentation may be found.
More complete documentation can be found in
rc.conf(5).
/usr
directory is on a separate partition and you do not know how to use
ed,
you will have to mount your
/usr
partition to gain access to
ex
or
vi.
Do the following:
# mount /usr
# export TERM=vt220
/var
on a separate partition, you need to repeat
that step for it. After that, you can edit
/etc/rc.conf
with
vi(1).
When you have finished, type
exit
at the prompt to
leave the single-user shell and continue with the multi-user boot.
/etc/rc.conf
for a networked environment are
hostname and possibly
defaultroute,
furthermore add an
ifconfig_int
for your interface
<int>,
along the lines of
ifconfig_de0="inet 123.45.67.89 netmask 255.255.255.0"
/etc/hosts:
ifconfig_de0="inet myname.my.dom netmask 255.255.255.0"
/etc/resolv.conf
file or (if you are feeling a little more adventurous) run
named(8).
See
resolv.conf(5)
or
named(8)
for more information.
/etc
that may require modification or setting up include
/etc/mailer.conf,
/etc/nsswitch.conf,
and
/etc/wscons.conf.
root
at the login prompt. There
is no initial password, but if you're using the machine in a
networked environment, you should create an account for yourself
(see below) and protect it and the
``root''
account with good passwords.
Unless you have connected an unusual terminal device as the console
you can just press
RETURN
when it prompts for
Terminal type? [...]
useradd(8)
command to add accounts to your system,
do not
edit
/etc/passwd
directly. See
useradd(8)
for more information on how to add a new user to the system.
/usr/X11R6/lib/X11/doc
for information.
/usr/X11R6/bin
to your path in your shell's dot file so that you have access to the X binaries.
/usr/pkgsrc
(though other locations work fine), as with the command:
# mkdir /usr/pkgsrc; tar -C /usr/pkgsrc -zxpf pkgsrc.tar.gz
README
file in the extraction directory (e.g.
/usr/pkgsrc/README)
for more information.
/etc/mail/aliases
to forward root mail to the right place (run
newaliases(1)
afterwards.)
/etc/mail/sendmail.cf
file will almost definitely need to be adjusted;
files aiding in this can be found in
/usr/share/sendmail.
See the
README
file there for more information.
/etc/rc.local
to run any local daemons you use.
/etc
files are documented in section 5 of the manual; so just invoking
# man 5 filename
Upgrading a previously-installed NetBSD System
miniroot.fs
onto the swap partition of the
NetBSD
hard disk. You must also have at least the
base
binary distribution set available, so that you can upgrade
with it, using one of the upgrade methods described above. Finally,
you must have sufficient disk space available to install the new
binaries. Since the old binaries are being overwritten in place,
you only need space for the new binaries, which weren't previously
on the system. If you have a few megabytes free on each of your
/
(root) and
/usr
partitions, you should have enough space.
loadbsd -b netbsd
loadbsd -bn2 netbsd
Directly booting
NetBSD,
with boot blocks installed
loadbsd -bsSn2 netbsd
netbsd -bsSn2
Once your kernel boots
You should see the screen clear and some information about
your system as the kernel configures the hardware. Note which
hard disk device is configured that contains your root
(/)
and swap partitions. When prompted for the root device, type
sd0b
(replacing
`0'
with the disk number that
NetBSD
used for
your root/swap device). When prompted for a dump device,
answer
`none'
for the upgrade. (For a normal boot, you would
tell it one of the swap devices). When prompted for the root
file system type, confirm
`generic',
which will auto-detect it.
CONTROL-C
to stop the upgrade process at any time.
However, if you press it at an inopportune moment, your system
may be left in an inconsistent (and possibly unusable) state.
/etc
directory. You will probably want to replace some of your
system configuration files, or incorporate some of the changes
in the new versions into yours.
cc(1)
and
ld(1)
manual pages.)
Compatibility Issues With Previous NetBSD Releases
General issues
/etc/rc
modified to use
/etc/rc.d/*
/etc/rc
was a traditional
BSD
style monolithic file.
As of
NetBSD1.5,
each discrete program or substem from
/etc/rc
and
/etc/netstart
has been moved into separate scripts in
/etc/rc.d/.
/etc/rc
uses
rcorder(8)
to build a dependency list of the files in
/etc/rc.d
and then executes each script in turn with an argument of
`start'.
Many
rc.d
scripts won't start unless the appropriate
rc.conf(5)
entry in
/etc/rc.conf
is set to
`YES.'
/etc/rc.shutdown
uses
rcorder(8)
to build a dependency list of the files in
/etc/rc.d
that have a
``KEYWORD: shutdown''
line, reverses the resulting list, and then executes each script in turn
with an argument of
`stop'.
The following scripts support a specific shutdown method:
cron,
inetd,
local,
and
xdm.
/etc/rc.d
as necessary.
Refer to the other scripts in that directory and
rc(8)
for more information on implementing
rc.d
scripts.
Issues affecting an upgrading from NetBSD 1.4 or later
named(8)
leaks version information
named(8)
where the version number of the server could be determined by remote clients.
This feature has not been disabled in
NetBSD1.5,
because there is a
named.conf(5)
option to change the version string:
option {
version "newstring";
};
sysctl(8)
pathname changed
sysctl(8)
is moved from
/usr/sbin/sysctl
to
/sbin/sysctl.
If you have hardcoded references to the full pathname
(in shell scripts, for example)
please be sure to update those.
sendmail(8)
configuration file pathname changed
sendmail(8)
upgrade from 8.9.x to 8.10.x,
/etc/sendmail.cf
is moved to
/etc/mail/sendmail.cf.
Also, the default
sendmail.cf(5)
refers different pathnames than before.
For example,
/etc/aliases
is now located at
/etc/mail/aliases,
/etc/sendmail.cw
is now called
/etc/mail/local-host-names,
and so forth.
If you have customized
sendmail.cf(5)
and friends, you will need to move the files to the new locations.
See
/usr/share/sendmail/README
for more information.
Using online NetBSD documentation
name(section)'.
Some examples of this are
intro(1),
man(1),
apropros(1),
passwd(1),
and
passwd(5).
# man passwd
passwd(1).
To view the documentation for
passwd(5),
enter
# man 5 passwd
Administrivia
send-pr(1)
command shipped with
NetBSD,
and fill in as much information about the problem as you can. Good
bug reports include lots of details. Additionally, bug reports can
be sent by mail to:
netbsd-bugs@netbsd.org.
send-pr(1)
is encouraged, however, because bugs reported with it
are entered into the
NetBSD
bugs database, and thus can't slip through
the cracks.
Thanks go to
Keith Bostic
Ralph Campbell
Mike Karels
Marshall Kirk McKusick
Mike Hibler
Rick Macklem
Jan-Simon Pendry
Chris Torek
Steve Allen
Jason Birnschein
Mason Loring Bliss
Jason Brazile
Mark Brinicombe
David Brownlee
Simon Burge
Dave Burgess
Ralph Campbell
Brian Carlstrom
James Chacon
Bill Coldwell
Charles Conn
Tom Coulter
Charles D. Cranor
Christopher G. Demetriou
Scott Ellis
Hubert Feyrer
Castor Fu
Greg Gingerich
William Gnadt
Michael Graff
Guenther Grau
Ross Harvey
Charles M. Hannum
Michael L. Hitch
Kenneth Alan Hornstein
Jordan K. Hubbard
Søren Jørvang
Scott Kaplan
Noah M. Keiserman
Harald Koerfgen
John Kohl
Chris Legrow
Ted Lemon
Norman R. McBride
Neil J. McRae
Perry E. Metzger
Toru Nishimura
Herb Peyerl
Mike Price
Dave Rand
Michael Richardson
Heiko W. Rupp
Brad Salai
Chuck Silvers
Thor Lancelot Simon
Bill Sommerfeld
Paul Southworth
Eric and Rosemary Spahr
Ted Spradley
Kimmo Suominen
Jason R. Thorpe
Steve Wadlow
Krister Walfridsson
Jim Wise
Christos Zoulas
(If you're not on that list and should be, tell us! We probably were
not able to get in touch with you, to verify that you wanted to be
listed.)
AboveNet Communications, Inc.
Advanced System Products, Inc.
Avalon Computer Systems
Bay Area Internet Solutions
Brains Corporation, Japan
Canada Connect Corporation
Co-operative Research Centre for Enterprise Distributed Systems Technology
Demon Internet, UK
Digital Equipment Corporation
Distributed Processing Technology
Easynet, UK
Free Hardware Foundation
Innovation Development Enterprises of America
Internet Software Consortium
MS Macro System GmbH, Germany
Numerical Aerospace Simulation Facility, NASA Ames Research Center
Piermont Information Systems Inc.
Salient Systems Inc.
VMC Harald Frank, Germany
Warped Communications, Inc.
Whitecross Database Systems Ltd.
We are...
| The NetBSD core group: | ||||||||
| Alistair Crooks | agc@netbsd.org | |||||||
| Jun-ichiro itojun Hagino | itojun@netbsd.org | |||||||
| Frank van der Linden | fvdl@netbsd.org | |||||||
| Luke Mewburn | lukem@netbsd.org | |||||||
| Christos Zoulas | christos@netbsd.org | |||||||
|
| ||||||||
| The portmasters (and their ports): | ||||||||
| Mark Brinicombe | mark@netbsd.org | arm32 | ||||||
| Jeremy Cooper | jeremy@netbsd.org | sun3x | ||||||
| Ross Harvey | ross@netbsd.org | alpha | ||||||
| Jun-ichiro itojun Hagino | itojun@netbsd.org | sh3 | ||||||
| Ben Harris | bjh21@netbsd.org | arm26 | ||||||
| Eduardo Horvath | eeh@netbsd.org | sparc64 | ||||||
| Darrin Jewell | dbj@netbsd.org | next68k | ||||||
| Søren Jørvang | soren@netbsd.org | cobalt | ||||||
| Søren Jørvang | soren@netbsd.org | sgimips | ||||||
| Wayne Knowles | wdk@netbsd.org | mipsco | ||||||
| Paul Kranenburg | pk@netbsd.org | sparc | ||||||
| Anders Magnusson | ragge@netbsd.org | vax | ||||||
| Minoura Makoto | minoura@netbsd.org | x68k | ||||||
| Phil Nelson | phil@netbsd.org | pc532 | ||||||
| Tohru Nishimura | nisimura@netbsd.org | luna68k | ||||||
| NONAKA Kimihiro | nonaka@netbsd.org | prep | ||||||
| Scott Reynolds | scottr@netbsd.org | mac68k | ||||||
| Kazuki Sakamoto | sakamoto@netbsd.org | bebox | ||||||
| Noriyuki Soda | soda@netbsd.org | arc | ||||||
| Wolfgang Solfrank | ws@netbsd.org | ofppc | ||||||
| Ignatios Souvatzis | is@netbsd.org | amiga | ||||||
| Jonathan Stone | jonathan@netbsd.org | pmax | ||||||
| Shin Takemura | takemura@netbsd.org | hpcmips | ||||||
| Jason Thorpe | thorpej@netbsd.org | alpha | ||||||
| Jason Thorpe | thorpej@netbsd.org | hp300 | ||||||
| Tsubai Masanari | tsubai@netbsd.org | macppc | ||||||
| Tsubai Masanari | tsubai@netbsd.org | newsmips | ||||||
| Izumi Tsutsui | tsutsui@netbsd.org | news68k | ||||||
| Frank van der Linden | fvdl@netbsd.org | i386 | ||||||
| Leo Weppelman | leo@netbsd.org | atari | ||||||
| Nathan Williams | nathanw@netbsd.org | sun3 | ||||||
| Steve Woodford | scw@netbsd.org | mvme68k | ||||||
|
| ||||||||
| The NetBSD 1.5 Release Engineering team: | ||||||||
| Chris G. Demetriou | cgd@netbsd.org | |||||||
| Havard Eidnes | he@netbsd.org | |||||||
| Ted Lemon | mellon@netbsd.org | |||||||
| John Hawkinson | jhawk@netbsd.org | |||||||
| Perry Metzger | perry@netbsd.org | |||||||
| Curt Sampson | cjs@netbsd.org | |||||||
| Jason Thorpe | thorpej@netbsd.org | |||||||
| Todd Vierling | tv@netbsd.org | |||||||
|
| ||||||||
| Developers and other contributors: | ||||||||
| Steve Allen | wormey@netbsd.org | |||||||
| Julian Assange | proff@netbsd.org | |||||||
| Lennart Augustsson | augustss@netbsd.org | |||||||
| Christoph Badura | bad@netbsd.org | |||||||
| Robert V. Baron | rvb@netbsd.org | |||||||
| Erik Berls | cyber@netbsd.org | |||||||
| John Birrell | jb@netbsd.org | |||||||
| Mason Loring Bliss | mason@netbsd.org | |||||||
| Manuel Bouyer | bouyer@netbsd.org | |||||||
| John Brezak | brezak@netbsd.org | |||||||
| Allen Briggs | briggs@netbsd.org | |||||||
| Aaron Brown | abrown@netbsd.org | |||||||
| David Brownlee | abs@netbsd.org | |||||||
| Frederick Bruckman | fredb@netbsd.org | |||||||
| Jon Buller | jonb@netbsd.org | |||||||
| Simon Burge | simonb@netbsd.org | |||||||
| Dave Burgess | burgess@cynjut.infonet.net | |||||||
| Robert Byrnes | byrnes@netbsd.org | |||||||
| D'Arcy J.M. Cain | darcy@netbsd.org | |||||||
| Dave Carrel | carrel@netbsd.org | |||||||
| James Chacon | jmc@netbsd.org | |||||||
| Bill Coldwell | billc@netbsd.org | |||||||
| Julian Coleman | jdc@netbsd.org | |||||||
| Chuck Cranor | chuck@netbsd.org | |||||||
| Aidan Cully | aidan@netbsd.org | |||||||
| Johan Danielsson | joda@netbsd.org | |||||||
| Matt DeBergalis | deberg@netbsd.org | |||||||
| Rob Deker | deker@netbsd.org | |||||||
| Chris G. Demetriou | cgd@netbsd.org | |||||||
| Jaromir Dolecek | jdolecek@netbsd.org | |||||||
| Andy Doran | ad@netbsd.org | |||||||
| Roland Dowdeswell | elric@netbsd.org | |||||||
| Matthias Drochner | drochner@netbsd.org | |||||||
| Jun Ebihara | jun@netbsd.org | |||||||
| Havard Eidnes | he@netbsd.org | |||||||
| Enami Tsugutomo | enami@netbsd.org | |||||||
| Bernd Ernesti | veego@netbsd.org | |||||||
| Erik Fair | fair@netbsd.org | |||||||
| Hubert Feyrer | hubertf@netbsd.org | |||||||
| Thorsten Frueauf | frueauf@netbsd.org | |||||||
| Castor Fu | castor@netbsd.org | |||||||
| Ichiro Fukuhara | ichiro@netbsd.org | |||||||
| Brian R. Gaeke | brg@dgate.org | |||||||
| Thomas Gerner | thomas@netbsd.org | |||||||
| Simon J. Gerraty | sjg@netbsd.org | |||||||
| Justin Gibbs | gibbs@netbsd.org | |||||||
| Adam Glass | glass@netbsd.org | |||||||
| Michael Graff | explorer@netbsd.org | |||||||
| Brad Grantham | grantham@tenon.com | |||||||
| Brian C. Grayson | bgrayson@netbsd.org | |||||||
| Matthew Green | mrg@netbsd.org | |||||||
| Juergen Hannken-Illjes | hannken@netbsd.org | |||||||
| Charles M. Hannum | mycroft@netbsd.org | |||||||
| Eric Haszlakiewicz | erh@netbsd.org | |||||||
| John Hawkinson | jhawk@netbsd.org | |||||||
| HAYAKAWA Koichi | haya@netbsd.org | |||||||
| René Hexel | rh@netbsd.org | |||||||
| Michael L. Hitch | mhitch@netbsd.org | |||||||
| Christian E. Hopps | chopps@netbsd.org | |||||||
| Ken Hornstein | kenh@netbsd.org | |||||||
| Marc Horowitz | marc@netbsd.org | |||||||
| Nick Hudson | skrll@netbsd.org | |||||||
| Martin Husemann | martin@netbsd.org | |||||||
| Dean Huxley | dean@netbsd.org | |||||||
| Bernardo Innocenti | bernie@netbsd.org | |||||||
| ITOH Yasufumi | itohy@netbsd.org | |||||||
| IWAMOTO Toshihiro | toshii@netbsd.org | |||||||
| Matthew Jacob | mjacob@netbsd.org | |||||||
| Lonhyn T. Jasinskyj | lonhyn@netbsd.org | |||||||
| Chris Jones | cjones@netbsd.org | |||||||
| Takahiro Kambe | taca@netbsd.org | |||||||
| Antti Kantee | pooka@netbsd.org | |||||||
| Lawrence Kesteloot | kesteloo@cs.unc.edu | |||||||
| Thomas Klausner | wiz@netbsd.org | |||||||
| Klaus Klein | kleink@netbsd.org | |||||||
| Wayne Knowles | wdk@netbsd.org | |||||||
| John Kohl | jtk@netbsd.org | |||||||
| Kevin Lahey | kml@netbsd.org | |||||||
| Johnny C. Lam | jlam@netbsd.org | |||||||
| Martin J. Laubach | mjl@netbsd.org | |||||||
| Ted Lemon | mellon@netbsd.org | |||||||
| Joel Lindholm | joel@netbsd.org | |||||||
| Mike Long | mikel@netbsd.org | |||||||
| Warner Losh | imp@netbsd.org | |||||||
| Federico Lupi | federico@netbsd.org | |||||||
| Brett Lymn | blymn@netbsd.org | |||||||
| Paul Mackerras | paulus@netbsd.org | |||||||
| David Maxwell | david@netbsd.org | |||||||
| Dan McMahill | dmcmahill@netbsd.org | |||||||
| Gregory McGarry | gmcgarry@netbsd.org | |||||||
| Neil J. McRae | neil@netbsd.org | |||||||
| Perry Metzger | perry@netbsd.org | |||||||
| der Mouse | mouse@netbsd.org | |||||||
| Joseph Myers | jsm@netbsd.org | |||||||
| Ken Nakata | kenn@netbsd.org | |||||||
| Bob Nestor | rnestor@netbsd.org | |||||||
| NONAKA Kimihiro | nonaka@netbsd.org | |||||||
| Masaru Oki | oki@netbsd.org | |||||||
| Atsushi Onoe | onoe@netbsd.org | |||||||
| Greg Oster | oster@netbsd.org | |||||||
| Herb Peyerl | hpeyerl@netbsd.org | |||||||
| Matthias Pfaller | matthias@netbsd.org | |||||||
| Dante Profeta | dante@netbsd.org | |||||||
| Chris Provenzano | proven@netbsd.org | |||||||
| Waldi Ravens | waldi@moacs.indiv.nl.net | |||||||
| Darren Reed | darrenr@netbsd.org | |||||||
| Michael Richardson | mcr@netbsd.org | |||||||
| Tim Rightnour | garbled@netbsd.org | |||||||
| Gordon Ross | gwr@netbsd.org | |||||||
| Heiko W. Rupp | hwr@netbsd.org | |||||||
| SAITOH Masanobu | msaitoh@netbsd.org | |||||||
| Curt Sampson | cjs@netbsd.org | |||||||
| Wilfredo Sanchez | wsanchez@netbsd.org | |||||||
| Ty Sarna | tsarna@netbsd.org | |||||||
| SATO Kazumi | sato@netbsd.org | |||||||
| Matthias Scheler | tron@netbsd.org | |||||||
| Karl Schilke (rAT) | rat@netbsd.org | |||||||
| Konrad Schroder | perseant@netbsd.org | |||||||
| Reed Shadgett | dent@netbsd.org | |||||||
| Tim Shepard | shep@netbsd.org | |||||||
| Takao Shinohara | shin@netbsd.org | |||||||
| Takuya SHIOZAKI | tshiozak@netbsd.org | |||||||
| Chuck Silvers | chs@netbsd.org | |||||||
| Thor Lancelot Simon | tls@netbsd.org | |||||||
| Jeff Smith | jeffs@netbsd.org | |||||||
| Bill Sommerfeld | sommerfeld@netbsd.org | |||||||
| Bill Squier | groo@netbsd.org | |||||||
| Bill Studenmund | wrstuden@netbsd.org | |||||||
| Kevin Sullivan | sullivan@netbsd.org | |||||||
| SUNAGAWA Keiki | kei@netbsd.org | |||||||
| Kimmo Suominen | kim@netbsd.org | |||||||
| Matt Thomas | matt@netbsd.org | |||||||
| Christoph Toshok | toshok@netbsd.org | |||||||
| UCHIYAMA Yasushi | uch@netbsd.org | |||||||
| Shuichiro URATA | ur@netbsd.org | |||||||
| Todd Vierling | tv@netbsd.org | |||||||
| Aymeric Vincent | aymeric@netbsd.org | |||||||
| Paul Vixie | vixie@netbsd.org | |||||||
| Krister Walfridsson | kristerw@netbsd.org | |||||||
| Lex Wennmacher | wennmach@netbsd.org | |||||||
| Assar Westerlund | assar@netbsd.org | |||||||
| Todd Whitesel | toddpw@netbsd.org | |||||||
| Rob Windsor | windsor@netbsd.org | |||||||
| Dan Winship | danw@netbsd.org | |||||||
| Jim Wise | jwise@netbsd.org | |||||||
| Michael Wolfson | mbw@netbsd.org | |||||||
| Colin Wood | ender@netbsd.org | |||||||
All product names mentioned herein are trademarks or registered trademarks of their respective owners.
The following notices are required to satisfy the license terms of the software that we have mentioned in this document:
This product includes software developed by the University of
California, Berkeley and its contributors.
This product includes software developed by The NetBSD Foundation, Inc.
This product includes software developed by the NetBSD Foundation, Inc.
and its contributors.
This product includes software developed by the Computer
Systems Engineering Group at Lawrence Berkeley Laboratory.
This product includes software developed by Adam Glass
and Charles Hannum.
This product includes software developed by Adam Glass
and Charles M. Hannum.
This product includes software developed by Adam Glass.
This product includes software developed by Alistair G. Crooks.
This product includes software developed by Amancio Hasty and
Roger Hardiman.
This product includes software developed by Berkeley Software
Design, Inc.
This product includes software developed by Bill Paul.
This product includes software developed by Charles D. Cranor
and Washington University.
This product includes software developed by Charles D. Cranor.
This product includes software developed by Charles Hannum,
by the University of Vermont and State Agricultural College
and Garrett A. Wollman, by William F. Jolitz, and by the
University of California, Berkeley, Lawrence Berkeley Laboratory,
and its contributors.
This product includes software developed by Charles Hannum.
This product includes software developed by Charles M. Hannum.
This product includes software developed by Chris Provenzano.
This product includes software developed by Christian E. Hopps.
This product includes software developed by Christopher G. Demetriou
for the NetBSD Project.
This product includes software developed by Christopher G. Demetriou.
This product includes software developed by Christos Zoulas.
This product includes software developed by David Jones and Gordon Ross.
This product includes software developed by Dean Huxley.
This product includes software developed by Eric S. Hvozda.
This product includes software developed by Ezra Story.
This product includes software developed by Gardner Buchanan.
This product includes software developed by Gordon Ross.
This product includes software developed by Gordon W. Ross
and Leo Weppelman.
This product includes software developed by Gordon W. Ross.
This product includes software developed by Hauke Fath.
This product includes software developed by HAYAKAWA Koichi.
This product includes software developed by
Hellmuth Michaelis and Joerg Wunsch.
This product includes software developed by Herb Peyerl.
This product includes software developed by Holger Veit and Brian Moore
for use with "386BSD" and similar operating systems.
This product includes software developed by Hubert Feyrer for
the NetBSD Project.
This product includes software developed by Iain Hibbert.
This product includes software developed by Ian W. Dall.
This product includes software developed by Ignatios Souvatzis
for the NetBSD Project.
This product includes software developed by Jason R. Thorpe
for And Communications, http://www.and.com/.
This product includes software developed by Joachim Koenig-Baltes.
This product includes software developed by Jochen Pohl
for The NetBSD Project.
This product includes software developed by John Polstra.
This product includes software developed by Jonathan Stone
and Jason R. Thorpe for the NetBSD Project.
This product includes software developed by Jonathan Stone
for the NetBSD Project.
This product includes software developed by Jonathan Stone.
This product includes software developed by Julian Highfield.
This product includes software developed by Kenneth Stailey.
This product includes software developed by Leo Weppelman.
This product includes software developed by Lloyd Parkes.
This product includes software developed by Manuel Bouyer.
This product includes software developed by Marc Horowitz.
This product includes software developed by Mark Brinicombe.
This product includes software developed by Mark Tinguely and Jim Lowe.
This product includes software developed by Markus Wild.
This product includes software developed by Martin Husemann
and Wolfgang Solfrank.
This product includes software developed by Mats O Jansson
and Charles D. Cranor.
This product includes software developed by Mats O Jansson.
This product includes software developed by Matthias Pfaller.
This product includes software developed by Michael L. Hitch.
This product includes software developed by Niels Provos.
This product includes software developed by Paul Kranenburg.
This product includes software developed by Paul Mackerras.
This product includes software developed by Peter Galbavy.
This product includes software developed by Philip A. Nelson.
This product includes software developed by Rodney W. Grimes.
This product includes software developed by Roland C. Dowdeswell.
This product includes software developed by Rolf Grossmann.
This product includes software developed by Scott Bartram.
This product includes software developed by SigmaSoft, Th. Lockert.
This product includes software developed by Tatoku Ogaito
for the NetBSD Project.
This product includes software developed by Terrence R. Lambert.
This product includes software developed by Theo de Raadt
and John Brezak.
This product includes software developed by Theo de Raadt.
This product includes software developed by Tohru Nishimura
for the NetBSD Project.
This product includes software developed by TooLs GmbH.
This product includes software developed by Winning Strategies, Inc.
This product includes software developed by Zembu Labs, Inc.
This product includes software developed by the Center for
Software Science at the University of Utah.
This product includes software developed by the Computer
Systems Laboratory at the University of Utah.
This product includes software developed by the University of Calgary
Department of Computer Science and its contributors.
This product includes software developed by the University of Vermont
and State Agricultural College and Garrett A. Wollman.
This product includes software developed for the FreeBSD project.
This product includes software developed for the Internet
Software Consortium by Ted Lemon.
This product includes software developed for the NetBSD Project
by Frank van der Linden.
This product includes software developed for the NetBSD Project
by Jason R. Thorpe.
This product includes software developed for the NetBSD Project
by John M. Vinopal.
This product includes software developed for the NetBSD Project
by Matthias Drochner.
This product includes software developed for the NetBSD Project
by Matthieu Herrb.
This product includes software developed for the NetBSD Project
by Perry E. Metzger.
This product includes software developed for the NetBSD Project
by Piermont Information Systems Inc.
This product includes software developed for the NetBSD Project
by Ted Lemon.
This product includes software developed by LAN Media Corporation
and its contributors.
This product includes software developed by Michael Graff for
the NetBSD Project.
This product includes software developed by Niklas Hallqvist,
C Stone and Job de Haas.
This product includes software developed by Eric Young (eay@mincom.oz.au).
This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit (http://www.openssl.org/).
This product includes software developed by the University of Oregon.
This product includes software developed by the University of Southern
California and/or Information Sciences Institute.
This product includes software developed by Internet Initiative Japan Inc.
This product includes software developed by Tobias Abt.
This product includes software developed by Klaus Burkert.
This product includes software developed by Michael van Elst.
This product includes software developed by Bernd Ernesti.
This product includes software developed by Markus Illenseer.
This product includes software developed by Mika Kortelainen.
This product includes software developed by Jukka Marin.
This product includes software developed by Kari Mettinen.
This product includes software developed by Brad Pepers.
This product includes software developed by Ignatios Souvatzis.
This product includes software developed by Michael Teske.
This product includes software developed by Lutz Vieweg.
This product includes software developed by Daniel Widenfalk.