+ userID="ssh://${1}"
+
+ fingerprint=$(fingerprint_server_key)
+
+ # match to only ultimately trusted user IDs
+ tmpuidMatch="u:$(echo $userID | gpg_escape)"
+
+ # find the index of the requsted user ID
+ # NOTE: this is based on circumstantial evidence that the order of
+ # this output is the appropriate index
+ if line=$(gpg_host --list-keys --with-colons --fixed-list-mode "0x${fingerprint}!" \
+ | egrep '^(uid|uat):' | cut -f2,10 -d: | grep -n -x -F "$tmpuidMatch") ; then
+ uidIndex=${line%%:*}
+ else
+ failure "No non-revoked user ID '$userID' is found."
+ fi
+
+ echo "The following host key user ID will be revoked:"
+ echo " $userID"
+ read -p "Are you sure you would like to revoke this user ID? (y/N) " OK; OK=${OK:=N}
+ if [ ${OK/y/Y} != 'Y' ] ; then
+ failure "User ID not revoked."
+ fi
+
+ message="Hostname removed by monkeysphere-server $DATE"
+
+ # edit-key script command to revoke user ID
+ revuidCommand=$(cat <<EOF
+$uidIndex
+revuid
+y
+4
+$message
+
+y
+save
+EOF
+ )
+
+ # execute edit-key script
+ if echo "$revuidCommand" | \
+ gpg_host --quiet --command-fd 0 --edit-key "0x${fingerprint}!" ; then
+
+ # update the trustdb for the authentication keyring
+ gpg_authentication "--check-trustdb"
+
+ show_server_key
+
+ echo
+ echo "NOTE: User ID revoked, but revocation not published."
+ echo "Run '$PGRM publish-key' to publish the revocation."
+ else
+ failure "Problem revoking user ID."
+ fi
+}
+
+# publish server key to keyserver
+publish_server_key() {
+ read -p "Really publish host key to $KEYSERVER? (y/N) " OK; OK=${OK:=N}
+ if [ ${OK/y/Y} != 'Y' ] ; then
+ failure "key not published."
+ fi
+
+ # find the key fingerprint
+ fingerprint=$(fingerprint_server_key)
+
+ # publish host key
+ gpg_authentication "--keyserver $KEYSERVER --send-keys '0x${fingerprint}!'"
+}
+
+diagnostics() {
+# * check on the status and validity of the key and public certificates
+ local seckey
+ local keysfound
+ local curdate
+ local warnwindow
+ local warndate
+ local create
+ local expire
+ local uid
+ local fingerprint
+ local badhostkeys
+ local sshd_config
+
+ # FIXME: what's the correct, cross-platform answer?
+ sshd_config=/etc/ssh/sshd_config
+ seckey=$(gpg_host --list-secret-keys --fingerprint --with-colons --fixed-list-mode)
+ keysfound=$(echo "$seckey" | grep -c ^sec:)
+ curdate=$(date +%s)
+ # warn when anything is 2 months away from expiration
+ warnwindow='2 months'
+ warndate=$(date +%s -d "$warnwindow")
+
+ echo "Checking host GPG key..."
+ if (( "$keysfound" < 1 )); then
+ echo "! No host key found."
+ echo " - Recommendation: run 'monkeysphere-server gen-key'"
+ elif (( "$keysfound" > 1 )); then
+ echo "! More than one host key found?"
+ # FIXME: recommend a way to resolve this
+ else
+ create=$(echo "$seckey" | grep ^sec: | cut -f6 -d:)
+ expire=$(echo "$seckey" | grep ^sec: | cut -f7 -d:)
+ fingerprint=$(echo "$seckey" | grep ^fpr: | head -n1 | cut -f10 -d:)
+ # check for key expiration:
+ if [ "$expire" ]; then
+ if (( "$expire" < "$curdate" )); then
+ echo "! Host key is expired."
+ echo " - Recommendation: extend lifetime of key with 'monkeysphere-server extend-key'"
+ elif (( "$expire" < "$warndate" )); then
+ echo "! Host key expires in less than $warnwindow:" $(date -d "$(( $expire - $curdate )) seconds" +%F)
+ echo " - Recommendation: extend lifetime of key with 'monkeysphere-server extend-key'"
+ fi
+ fi
+
+ # and weirdnesses:
+ if [ "$create" ] && (( "$create" > "$curdate" )); then
+ echo "! Host key was created in the future(?!). Is your clock correct?"
+ echo " - Recommendation: Check clock ($(date +%F_%T)); use NTP?"
+ fi
+
+ # check for UserID expiration:
+ echo "$seckey" | grep ^uid: | cut -d: -f6,7,10 | \
+ while IFS=: read create expire uid ; do
+ # FIXME: should we be doing any checking on the form
+ # of the User ID? Should we be unmangling it somehow?
+
+ if [ "$create" ] && (( "$create" > "$curdate" )); then
+ echo "! User ID '$uid' was created in the future(?!). Is your clock correct?"
+ echo " - Recommendation: Check clock ($(date +%F_%T)); use NTP?"
+ fi
+ if [ "$expire" ] ; then
+ if (( "$expire" < "$curdate" )); then
+ echo "! User ID '$uid' is expired."
+ # FIXME: recommend a way to resolve this
+ elif (( "$expire" < "$warndate" )); then
+ echo "! User ID '$uid' expires in less than $warnwindow:" $(date -d "$(( $expire - $curdate )) seconds" +%F)
+ # FIXME: recommend a way to resolve this
+ fi
+ fi
+ done
+
+# FIXME: verify that the host key is properly published to the
+# keyservers (do this with the non-privileged user)
+
+# FIXME: check that there are valid, non-expired certifying signatures
+# attached to the host key after fetching from the public keyserver
+# (do this with the non-privileged user as well)
+
+# FIXME: propose adding a revoker to the host key if none exist (do we
+# have a way to do that after key generation?)
+
+ # Ensure that the ssh_host_rsa_key file is present and non-empty:
+ echo
+ echo "Checking host SSH key..."
+ if [ ! -s "${VARLIB}/ssh_host_rsa_key" ] ; then
+ echo "! The host key as prepared for SSH (${VARLIB}/ssh_host_rsa_key) is missing or empty."
+ else
+ if [ $(stat -c '%a' "${VARLIB}/ssh_host_rsa_key") != 600 ] ; then
+ echo "! Permissions seem wrong for ${VARLIB}/ssh_host_rsa_key -- should be 0600."
+ fi
+
+ # propose changes needed for sshd_config (if any)
+ if ! grep -q "^HostKey[[:space:]]\+${VARLIB}/ssh_host_rsa_key$" "$sshd_config"; then
+ echo "! $sshd_config does not point to the monkeysphere host key (${VARLIB}/ssh_host_rsa_key)."
+ echo " - Recommendation: add a line to $sshd_config: 'HostKey ${VARLIB}/ssh_host_rsa_key'"
+ fi
+ if badhostkeys=$(grep -i '^HostKey' "$sshd_config" | grep -q -v "^HostKey[[:space:]]\+${VARLIB}/ssh_host_rsa_key$") ; then
+ echo "! $sshd_config refers to some non-monkeysphere host keys:"
+ echo "$badhostkeys"
+ echo " - Recommendation: remove the above HostKey lines from $sshd_config"
+ fi
+ fi
+ fi
+
+# FIXME: look at the ownership/privileges of the various keyrings,
+# directories housing them, etc (what should those values be? can
+# we make them as minimal as possible?)
+
+# FIXME: look to see that the ownertrust rules are set properly on the
+# authentication keyring
+
+# FIXME: make sure that at least one identity certifier exists
+
+ echo
+ echo "Checking for MonkeySphere-enabled public-key authentication for users ..."
+ # Ensure that User ID authentication is enabled:
+ if ! grep -q "^AuthorizedKeysFile[[:space:]]\+${VARLIB}/authorized_keys/%u$" "$sshd_config"; then
+ echo "! $sshd_config does not point to monkeysphere authorized keys."
+ echo " - Recommendation: add a line to $sshd_config: 'AuthorizedKeysFile ${VARLIB}/authorized_keys/%u'"
+ fi
+ if badauthorizedkeys=$(grep -i '^AuthorizedKeysFile' "$sshd_config" | grep -q -v "^AuthorizedKeysFile[[:space:]]\+${VARLIB}/authorized_keys/%u$") ; then
+ echo "! $sshd_config refers to non-monkeysphere authorized_keys files:"
+ echo "$badauthorizedkeys"
+ echo " - Recommendation: remove the above AuthorizedKeysFile lines from $sshd_config"
+ fi
+}
+
+# retrieve key from web of trust, import it into the host keyring, and
+# ltsign the key in the host keyring so that it may certify other keys
+add_certifier() {
+ local domain
+ local trust
+ local depth
+ local keyID
+ local fingerprint
+ local ltsignCommand
+ local trustval
+
+ # set default values for trust depth and domain
+ domain=
+ trust=full
+ depth=1
+
+ # get options
+ TEMP=$(getopt -o n:t:d: -l domain:,trust:,depth: -n "$PGRM" -- "$@")
+
+ if [ $? != 0 ] ; then
+ exit 1
+ fi
+
+ # Note the quotes around `$TEMP': they are essential!
+ eval set -- "$TEMP"
+
+ while true ; do
+ case "$1" in
+ -n|--domain)
+ domain="$2"
+ shift 2
+ ;;
+ -t|--trust)
+ trust="$2"
+ shift 2
+ ;;
+ -d|--depth)
+ depth="$2"
+ shift 2
+ ;;
+ --)
+ shift
+ ;;
+ *)
+ break
+ ;;
+ esac
+ done
+
+ keyID="$1"
+ if [ -z "$keyID" ] ; then
+ failure "You must specify the key ID of a key to add."
+ fi
+ export keyID
+
+ # get the key from the key server
+ gpg_authentication "--keyserver $KEYSERVER --recv-key '0x${keyID}!'"
+
+ # get the full fingerprint of a key ID
+ fingerprint=$(gpg_authentication "--list-key --with-colons --with-fingerprint 0x${keyID}!" | \
+ grep '^fpr:' | grep "$keyID" | cut -d: -f10)
+
+ if [ -z "$fingerprint" ] ; then
+ failure "Key '$keyID' not found."
+ fi
+
+ echo
+ echo "key found:"
+ gpg_authentication "--fingerprint 0x${fingerprint}!"
+
+ echo "Are you sure you want to add the above key as a"
+ read -p "certifier of users on this system? (y/N) " OK; OK=${OK:-N}
+ if [ "${OK/y/Y}" != 'Y' ] ; then
+ failure "Identity certifier not added."
+ fi
+
+ # export the key to the host keyring
+ gpg_authentication "--export 0x${fingerprint}!" | gpg_host --import
+
+ if [ "$trust" == marginal ]; then
+ trustval=1
+ elif [ "$trust" == full ]; then
+ trustval=2
+ else
+ failure "Trust value requested ('$trust') was unclear (only 'marginal' or 'full' are supported)."
+ fi
+
+ # ltsign command
+ # NOTE: *all* user IDs will be ltsigned
+ ltsignCommand=$(cat <<EOF
+ltsign
+y
+$trustval
+$depth
+$domain
+y
+save
+EOF
+ )
+
+ # ltsign the key
+ if echo "$ltsignCommand" | \
+ gpg_host --quiet --command-fd 0 --edit-key "0x${fingerprint}!" ; then
+
+ # update the trustdb for the authentication keyring
+ gpg_authentication "--check-trustdb"
+
+ echo
+ echo "Identity certifier added."
+ else
+ failure "Problem adding identify certifier."
+ fi
+}
+
+# delete a certifiers key from the host keyring
+remove_certifier() {
+ local keyID
+ local fingerprint
+
+ keyID="$1"
+ if [ -z "$keyID" ] ; then
+ failure "You must specify the key ID of a key to remove."
+ fi