* invalidate any other reasons why the executable file might be covered by
* the GNU General Public License.
*
- * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
*
* -->
*
- * \version $Id$
*
* \brief SIPO Module
*
- * The SIPO module trasform a serial input in
- * a parallel output. Please check hw_sipo.h
- * file to customize hardware relative parameters.
+ * The SIPO module transforms a serial input in a parallel output. Please check hw_sipo.h
+ * file to customize hardware related parameters.
*
+ * \author Andrea Grandi <andrea@develer.com>
* \author Daniele Basile <asterix@develer.com>
*/
#include "hw/hw_sipo.h"
#include <cfg/compiler.h>
+#include <cfg/log.h>
-#include <kern/kfile.h>
+#include <io/kfile.h>
#include <string.h>
+
+#define SIPO_DATAORDER_START(order) (order ? SIPO_DATAORDER_START_LSB : SIPO_DATAORDER_START_MSB)
+#define SIPO_DATAORDER_SHIFT(shift, order) (order ? ((shift) <<= 1) : ((shift) >>= 1))
+
/**
* Write a char in sipo shift register
*/
-INLINE void sipo_putchar(uint8_t c)
+INLINE void sipo_putchar(uint8_t c, uint8_t bit_order, uint8_t clock_pol)
{
+ uint8_t shift = SIPO_DATAORDER_START(bit_order);
+
for(int i = 0; i < 8; i++)
{
- if((c & BV(i)) == 0)
+ if((c & shift) == 0)
SIPO_SI_LOW();
else
SIPO_SI_HIGH();
- SIPO_SI_CLOCK();
+ SIPO_SI_CLOCK(clock_pol);
+
+ SIPO_DATAORDER_SHIFT(shift, bit_order);
}
}
/**
- * Write a buffer into sipo register and when finish to
- * we load it.
+ * Write a buffer into the sipo register and, when finished, give a load pulse.
*/
- static size_t sipo_write(UNUSED_ARG(struct KFile *, fd), const void *_buf, size_t size)
+static size_t sipo_write(struct KFile *_fd, const void *_buf, size_t size)
{
const uint8_t *buf = (const uint8_t *)_buf;
+ Sipo *fd = SIPO_CAST(_fd);
size_t write_len = size;
+
ASSERT(buf);
- // Load into shift register all byte in buffer
+ SIPO_SET_SI_LEVEL();
+ SIPO_SET_CLK_LEVEL(fd->clock_pol);
+ SIPO_SET_LD_LEVEL(fd->load_device, fd->load_pol);
+
+ // Load into the shift register all the buffer bytes
while(size--)
- sipo_putchar(*buf++);
+ sipo_putchar(*buf++, fd->bit_order, fd->clock_pol);
- // We finsh to load bytes into shift register, load it.
- SIPO_LOAD();
+ // We finsh to load bytes, so load it.
+ SIPO_LOAD(fd->load_device, fd->load_pol);
return write_len;
}
//Set kfile struct type as a generic kfile structure.
DB(fd->fd._type = KFT_SIPO);
- // Set up data flash programming functions.
+ // Set up SIPO writing functions.
fd->fd.write = sipo_write;
SIPO_INIT_PIN();
+ /* Enable sipo output */
+ SIPO_ENABLE();
}